Used Contactor for sale (186)

Year of construction: 1999, condition: ready for operation (used), A complete bottle filling line for cold and hot products is available. Bottle types: 0.25l/0.33l/0.5l vegetable/0.75l Bordeaux/0.75l fruit oasis/1l VdF/1l PET hotfill. Closure types: 28er Alu-Anroll/33er TWO/43er TWO/PET closure. Products: Cold fill CO2/pressurized hot fill below 100°C/pressurized hot fill above 100°C. Carton outer packaging: tray/wrap-around, total line output: approx. 27000 bottles/h. 1) Bottle washer Niko 36.25.750.100, year of manufacture: 1999, control: Siemens S7, spare parts package: available. 2) Bottle filling machine KHS Innofill DNR80, year of manufacture: 1999, control system: Siemens S7 with HMI renewed in 2015, filling stations: 80, filling temperature range: 10°C-104°C, products: Soft drinks/mineral water/fruit juices, spare parts package: available. 3) Screw capper (connected to the KHS) Alcoa 15 VK, year of manufacture: 1999, cap types: 28 mm aluminum and 43 mm plastic caps, sorting units: 2, replacement spindles: available, spare parts package: available. 4) TWO capper Italmeccania/Crown S4BLH, year of manufacture: approx. 1993, control: Siemens S7, capper type: belt capper, spare parts package: available. Including suction unit and sorting unit for TWO sheet metal closures. 5) Tunnel pasteurizer/recooler Göbel Tuchenhagen K1-35-175, year of construction: approx. 1993, control: contactor control, heating zones: 3, cooling zones: 2, fresh water zones: 1, belt width: 3500mm, length: approx. 16000mm. 6) Drying tunnel Europool TF03, year of construction: 2007, control system: Siemens S7, blower: 3. 7) Krones Starmatic high-speed labeling machine, year of manufacture: 1991, control system: Siemens S5, spare parts package: available. 8) Sleever Krones, year of manufacture: 2007, control system: Siemens S7, sleeve dimensions X/Y: 139mm/149mm, sleeve magazine: available, spare parts package: available. 9) Wrap-around packaging machine Kisters 320/50, year of manufacture: 1999, control: Rexroth Indramat, packaging capacity: 50 cycles/min, packaging type: tray/wrap-around, spare parts package: available. Including a Nordson Problue 14 gluing unit and automatic glue conveyor. 10) Shrink tunnel Krones Schrinkmat 5000, year of construction: 2007, heating zones: 10, spare parts package: available. Including suction unit. 11) Indspect fill level label inspection machine, inspection method: Inclined seat inspection/fill tube detection/lid detection/fill level inspection/vacuum inspection and label inspection. 12) KHS Lord 1BSN2 palletizing system, year of manufacture: 1999, control system: Siemens S7, pallet formats: Düsseldorfer pallet/Euro pallet/industrial pallet, pre-grouping station: available. 13) 2-sided label printer Logopak 920 II PF, year of manufacture: 2004, label dimensions X/Y: 148mm/210mm. 14) Various conveyor belts for product transport between the above-mentioned machines. Documentation available. On-site inspection is possible. Hnedpswxfagofx Ag Ueg

Condition: new, *Technical standard specification: Unit type: 6/150 Heating capacity: 6 kW Cooling capacity: 45 kW (Performance data at 80°C flow temperature and 15°C cooling water temperature and a pressure difference between cooling water inlet and outlet of at least 2 bar) Medium: water up to 150°C Maximum external volume: 9 ltr at 150°C *Functional equipment: - Cooling and filling controlled via solenoid valve - Automatic filling via cooling water - Level monitoring by magnetic float switch - Dirt filter in return flow of circulation and cooling water inflow - Reversing circuit for leakage stop operation (usable up to system closing temp.) - Ball valve in flow & return - Automatic temperature-dependent system closure - Filling time monitoring and aquatimer - Adjustable pump overrun - Adjustable temperature alarm - Options: Interface cable - Regulation and control unit SBCmini, with relay for common alarm, 230V, on rear of controller on terminal block - Heating control SSR - Control box IP54 - Interface 20mA TTY; pin assignment Arburg - Cekon plug 16A - Corrosion-resistant components (VA,MS) - Unit mounted on castors, two of them steerable with brake - Additional temperature fuse for safe shutdown of the heating on heating contactor - Bypass between flow and return with reduced cross-section *Pump: Type: Y2051 Delivery rate (max) 27 ltr/min Delivery pressure (max) 4.5 bar Hnedpfx Aofnvwqjg Usg Motor power 0.5 kW Type of submersible pump / peripheral impeller *Dimensions/Weights/Colours Dimensions L/W/H: 600 mm x 240 mm x 493 mm (without connection) Weight: approx. 43 kg Colour: Housing: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections: Circulation medium socket G1/2" cooling water socket G3/8" *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 430 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, controller manufacturer: GSK, controller model: GSK218MC-V, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 21, CINCINNATI ARROW 750 GARANTIA: 2 ANOS Servomotores de eixo com encoder absoluto de 25 bits (sem pilhas). X e Y - 6N/m Z - 12 N/m Spindle de 7.5KW com 8000 Rpm máximo. Cursos de: X 750 mm Y 500 mm Z 430 mm Armazém de ferramentas do tipo umbrela com 21 ferramentas Cone BT40 Rápidos de 20m/min Controlador 218MC-V da GSK Ecrã policromático Comunicação por rede, rs232 ou USB Controlador preparado para maquinação de alta velocidade Comando MPG portátil incluído Quadro elétrico completamente refeito com material de alta qualidade (Disjuntores de nível industrial 10KA Schneider, disjuntores motores de periféricos da Schneider, fonte de alimentação Weidmuller, contactores da Schneider, relés da Weidmuller) Hedpfjv U Dncjx Ag Usng Transformador trifásico para alimentação do sistema CNC novo incluído Sensores da máquina novos, Bomba de água nova, cablagem nova. Lubrificação da Spindle e rolamentos através de central de lubrificação com acionamento pneumático, testada e funcional. Forras telescópicas em inox originais nos eixos X e Y, lona no Z. ----- CINCINNATI ARROW 750 2 YEAR WARRANTY Axis servo motors with 25-bit absolute encoder (without batteries). X and Y - 6N/m Z - 12 N/m 7.5KW spindle with 8000 Rpm maximum. Strokes of: X 750 mm Y 500 mm Z 430 mm Umbrella-type tool magazine with 21 tools Taper BT40 Rapid 20 m/min GSK 218MC-V controller Colour screen Network communication, RS232 or USB Controller prepared for high-speed machining Portable MPG control included Electrical panel completely redone with high quality material (Schneider industrial grade 10KA circuit breakers, Schneider peripheral motor circuit breakers, Weidmuller power supply, Schneider contactors, Weidmuller relays) New three-phase transformer for powering the CNC system included. New machine sensors, new water pump, new wiring. Spindle and bearing lubrication through a pneumatically driven lubrication center, tested and functional. Original stainless steel telescopic linings on the X and Y axes.

Condition: like new (used), functionality: fully functional, machine/vehicle number: FDL-150-100E/NC, total length: 1,200 mm, pressing force: 150 t, table width: 800 mm, working height: 600 mm, clearance between the columns: 1,250 mm, Equipment: documentation/manual, safety light barrier, DOUBLE-COLUMN HYDRAULIC PRESS WITH TWO SIDE CYLINDERS FOR PRE-PRESSING AND PRESSING OF ROTORS AND STATORS, AND A CENTRAL CYLINDER FOR ROTOR SHAFT EXTRACTION, AS WELL AS FOR SHAFT EXTRACTION IN CASE OF REPAIR It features an extendable table for stacking and handling rtors and stators. It meets and satisfies all essential safety and health requirements according to CE regulations. STRUCTURE AND TABLES • Consists of a rigid fixed bench welded structure made exclusively from S355JR steel. • Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. • Calculated and designed using finite element software. • Mechanically movable grooved table measuring 1200 x 800 mm with a stroke of 1,200 mm, equipped with a worm gear reducer and a 0.5 HP electric motor with brake. • Central drill on the table with a diameter of 250 mm and a maximum depth of 550 mm. • Useful lifting capacity of the table for moving 4 tons. Hjdpfxswpg Awe Ag Uong • Movement speed of 30 mm/sec. • Front interior width of 1250 mm (space between columns). • Working height of 600 mm. MAIN CYLINDERS: 150 TN • Two 75-ton hydraulic cylinders (150 tons total), with a stroke of 1200 mm connected by a plate with a central hole of 250 mm in diameter. • Maximum useful height of the cylinder plate: 1,440 mm. • Minimum useful height of the cylinder plate: 200 mm. ABSTRACTION CYLINDER • One 100-ton central cylinder with a stroke of 1200 mm. • Designed to accommodate an abstraction clamp, end of the rod threaded to M 35.150 x 40 mm length. • Maximum useful height of the abstraction cylinder: 1600 mm from the root of the rod thread. • Minimum useful height of the abstraction cylinder: 400 mm from the root of the rod thread. HYDRAULIC GROUP • Two-speed hydraulic group with 5.5 HP power “Siemens Motor”, with automatic disconnection of high speed and independent speeds. Maximum pressure: 250 bar. • Pressure regulation system using proportional valves. • Air-oil cooler. • Temperature sensor. • Hydraulic group located on the right side. ELECTRICAL INSTALLATION AND SAFETY • Equipped with a SIEMENS mod. SIMATIC S7 1200 safety PLC and a 12” HMI touchscreen mod. MTP with 99 memory slots allowing adjustment of pre-pressing power, pressing, calendering, and stroke of the pressing and extraction cylinders, as well as the holding times during processes. • Electrical and hydraulic maneuvers are redundant and self-controlled. They include an additional safety block and self-control devices for operation and safety. Includes verification and certification of correct operation and safety distance for photoelectric cells. • The electrical panel includes a selector for choosing the type of work in manual, semi-automatic, or automatic position and a selector for high-speed or low-speed operation. • Operation is performed via a two-hand low-voltage electrical pushbutton. • All installed electrical materials are Siemens, including relays, contactors, main motor, etc. • Ready for Industry 4.0. • To ensure safety, it includes category IV photoelectric barriers located in the front work area, two fixed side guards, and a practicable rear guard with a magnetic disconnection detector.

Condition: new, Field of application: Mining Empty weight: 22.500 kg Volume of the tank: 55 m^3 Productivity: 500 tph Hard stone crushing and screening unit 500 tons per hour capacity 55 m3 Vıbrating Grizzly Feeder 1 Hnedox D Dg Tspfx Ag Uog 1100x850mm Jaw Crusher 1 1200x6000mm Belt Conveyor 1 1200x3300mm Belt Conveyor 1 30m3 Hopper Feeder 1 Metso HP400 Cone Crusher(Chassis, Software, Engine Included) 1 2400x6000mm Vibraitng Screen 1 800x30000mm Belt Conveyor 1 800x6000mm Belt Conveyor 1 800x17000mm Belt Conveyor 1 1000x33000mm Belt Conveyor 1 20 m3 Hopper Feeder 2 VSI900 2x200kw Vertical Shaft Impact Crusher 2 1000x10000mm Belt Conveyor 1 1000x28000mm Belt Conveyor 1 2200x6000mm Horizontal Vibraitng Screen 2 800x10000mm Belt Conveyor 1 600x10000mm Belt Conveyor 1 600x20000mm Belt Conveyor 5 1000x2000mm Belt Conveyor 1 Control Panel Climated Room 1 FEEDING HOPPER & GRIZZLY FEEDER -PPG • Dimensions : 1350x6000 mm • Hoppers Volume : 55 m3 • Feeding Capacity :500-700 tons/h • Grill Dimension : 820 mm • Main Body Thickness : 20 mm • Body liners : HARDOX 450 – 10 mm • Weight : 22.5 tonnes • Vibromotors : 2 x 9,8 kW – KEMP-MEGATECH Brand, Origin: ITALY • Walking platforms are included. • 100rpm Vibrating Speed • Bolted Type Extension Covers 2 JAW CRUSHER-PJC-13 • Feeding size : 1300 x 1100 mm. • Capacity : 450-550 tph • Power : Heavy duty AC motor, 160 Kw.1450 rpm 13- VERTICAL SHAFT IMPACT CRUSHER 2x200 kw Model : VSI 900 -CR 7- VIBRATING SCREEN 2460/3 Dimension : 6.000 x 2.400 mm Screen Decks : 4 pcs CONVEYORS 3-BELT CONVEYOR : 1200 x 6.000 mm, 15 Kw motor power 4- BELT CONVEYOR : 1200 x 30.000 mm, 30 kW motor power 6- BELT CONVEYOR : 1200 x 24.000 mm, 22 kW motor power 8- BELT CONVEYOR : 800 x 30.000 mm, 18,5 kW motor power 9- BELT CONVEYOR: 800 x 6000mm, 5,5 kw motor power 10- BELT CONVEYOR : 800 x 17.000 mm, 11 Kw motor power 11- BELT CONVEYOR : 1000 x 33.000 mm, 22 kW motor power 14- BELT CONVEYOR : 1000 x 10.000 mm, 7,5 kW motor power 15- BELT CONVEYOR : 1000 x 28.000 mm, 22 kW motor power 17- BELT CONVEYOR : 800 x 10.000 mm, 7,5 kW motor power 18- BELT CONVEYOR : 600 x 10.000 mm, 4 kW motor power 19- BELT CONVEYOR : 600 x 20.000 mm,5PCS 7,5 kW motor power 20- BELT CONVEYOR : 1000 x 20.000 mm,15 kW motor power 4-12 VIBRATING HOPPER FEEDER Volume: 30 cbm /20 m2 16-HORIZONTAL VIBRATING SCREEN Model TE2260 Main Dimensions 2200mm X 6000mm 21- CONTROL CABINET AND AUTOMATION SYSTEM • Dimensions : 2200x4000x2200 mm • Electronic equipments : Siemens Brand • Air conditioner 9.000 BTU • Heat and noise isolated control cabinet • Wiring between plant equipment and control panel is included. • • Climated and isolated prefabricated control room. • Piano command table and control panels. • Contactors, relays, main power switch and other electrical command devices are SIEMENS mark. • Star / Delta start for crushers and delta start for other equipments. • Cabling inside the control room is included. • Cabling among the units is not included. Bunker and feeder...

Condition: good (used), Year of construction: 1996, KRÜSI chalet building machine / log house production line type CM 40 Manufacturer Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of manufacture 1996 S/N 431 Condition: good, technically checked and cleaned / ready for operation Functional principle Machining of timber for chalet construction / log house production The beams can be processed in one pass - cutting to length - horizontal- and vertical milling of the necks / grooves in one clamping - drilling - milling the face grooves workpiece: - Cutting height max. 200nn - Cutting width max. 250mm Robust construction in welded design. Machine (horizontal and vertical milling unit) with 4 special milling motors, with hardened and ground guides for highest machining accuracy. Carriage guided by dust-protected and preloaded ball-bearing rollers. Working range up to 200 x 250 mm. Completely ready for operation, with contactor control, motors protected by thermal relays. Electrical equipment for voltage 380 V, 50 Hz, with protective bonnets, central connection for on-site chip extraction, with 2 eccentric clamps, without milling tool (folder). With hydropneumatic horizontal and vertical feed electrically controlled, together with the start-up of the milling motors. Rapid traverse and feed infinitely adjustable. Completely wired and installed, including air maintenance unit. Stains with a thickness of more than 14 cm must be processed in two tensions. Such patches have to be re-milled by the amount of the extra thickness. Machine protection bonnets over the moving parts with gas spring weight compensation Machine description / equipped with: 1. sawing unit: Manual feed Spindle adjustment with analogue dimension display Hnedpfju Uh T Djx Ag Usg Saw blade-Ø max. / bore-o 400 / 30 mmm Carbide tipped with chip depth limiter (synchronous operation) Adjustable riving knife Motor speed min 1 / 2900 Power kW 2,2 2. CM milling unit ( log house unit ) Hydropneumatic feed Spindle adjustment with digital dimension display Horizontal milling unit Cutter Ø 180mm cutter width max.130mm from cutter width 60 mm use only aluminium alloy cutters with reversible cutting edges 2 motors hydro-pneumatic feed kW each 2,2 Hydropneumatic feed Rapid traverse and working feed infinitely adjustable 3. drilling unit: Manual feed Spindle adjustment with analogue dimension display Drill holder collet ER 25 Clamping Ø max. mm 16 Drill Ø max. mm 32 Motor min'1 1450, kW 1,8 4. face milling unit Hydropneumatic feed Spindle adjustment with digital dimension display Fraser- Ø max. mm 230 Cutter width max. mm60 Motor min1 / 2900, kW 3,0 2 V-belts SPZ 9,5x1000 La Pneumatic On-site operating pressure min/max MPa (bar) 0.7/1 (7/10) Air consumption Nm3/h 8 Electrical system Operating voltage V / Hz 380, 50 Rated power kW 8.8 -15.8 depending on version On-site back-up fuse A 3 x 25 tr

Condition: new, Year of construction: 2025, Mill without screen Xtra2-A / 26.26 St Low-speed mill without screen, with two coarse crushers, compact and mobile on 4 wheels, 2 of which with brakes. The feed hopper and cutting chamber can be easily and completely opened via a hinge mechanism and quick lock, which allows for quick and easy cleaning. Shredder-type rotor with two primary coarse crushers, each with three crushing fingers, which also allow for the crushing of awkward and larger pieces of scrap. Control with contactor and electrically redundant safety limit switches. The control unit is integrated in a plastic housing, including a 4-meter connection cable and a CEE 16A/6h plug. Standard Z-hopper made of transparent polycarbonate (PC) sheet with a wide loading opening. Collection box for ground material with a capacity of 8 liters, includes a suction hose for connecting a pipe with a diameter of ND 38 or 40 mm. Technical data: • Motor power: 1.5 kW • Power supply: 3 x 400 V, 50 Hz • Cutting chamber opening: 260 mm x 260 mm • Primary shredders: 2 pieces, each with 3 shredding fingers • Rotor speed: 32 rpm Hnedpfx Aowktvgog Ueg • Rotor: multi-tooth, 3 pieces • Static knives: 2 x 3 hardened knives • Cutting configuration: standard cutting module 4 mm (rotor tooth width); optional 5 mm

Condition: like new (used), Year of construction: 2022, operating hours: 200 h, functionality: fully functional, screw diameter: 70 mm, overall weight: 600 kg, clamping force: 80 kN, total width: 2,800 mm, total length: 4,000 mm, total height: 2,260 mm, Main Features: 1. Computer Control System (PLC) – Japanese Mitsubishi PLC 2. Electrical Cabinet – All electrical components are sourced from globally renowned brands, ensuring quality and stability. 3. Touch Screen – Innovation computer control system 4. Advanced Hydraulic Cylinder from Germany 5. Linear Guideway 6. ABB Inverter from Switzerland & Rexroth from Germany 7. Large Diameter Galvanized Steel Pipes 8. Electric Lifting Platform 9. Ceramic Heater 10. Hydraulic System & Valve Connections – From Yuken Industry Technical Specifications: • Suitable Material: PE, PP, and others • Max Volume: 6 L • Production Capacity: 170-260 pcs/h • Dimensions: 4.0 × 2.26 × 2.8 m • Weight: 6T Plasticization System: • Reducer: Hard finishing, high strength, low noise • Screw: Ø 70 mm, L/D ratio 24, 38CrMoALA, cooling system available • Plasticization Capacity: 100 kg/h (HDPE) • Heating Zones: 3-4 aluminum heaters, automatic heating • Heating Power: 12 kW/h • Extruder Motor: Three-phase asynchronous motor (380V, 50HZ) • Cooling Fan: 4 zones, automatic cooling Extrusion System: • Material: High-grade alloy steel, central feeding • Number of Die Heads: 1 • Max Die Mouth Diameter: Ø 160 mm • Heating Zones: 4, stainless steel heating cycle • Heating Power: 5-7 kW Clamping System: • Features: High strength, rigidity, central mold locking, stable mold opening & closing • Clamping Force: 80KN • Template Distance Adjustment: 170-520 mm • Max Mold Size: 380 × 420 mm Electric System: • Automatic Monitoring, Fault Alarms, Auto Counting, Auxiliary Functions • Control Interface: Touchscreen with self-diagnosis alarm system • Temperature Control: Automatic temperature control module • Motion Control: Inovance (Chinese/English version) Hydraulic System: • Features: Multi-functional integrated hydraulic block, proportional control, high efficiency • Oil Pump Motor: Three-phase asynchronous motor (380V/220V, 50/60HZ) • Oil Pump: Imported double pump • Valves: Imported oil pump valves and connections • Oil Pipes: Double-layer wear-resistant • System Pressure: 60 kg/cm² • Cooling System: Separate water cooling cycle, oil cooler Pneumatic System: • Brand: Taiwan AIRTAC pneumatic system Hnedpfx Ajv Iflpeg Uog • Air Pressure: 0.6 MPa • Air Displacement: 0.8 m³/min • Electromagnetic Valve: Taiwan AIRTAC Main Components: Electronic Parts: • PLC Control System: MITSUBISHI from Japan • Touch Screen: INOVANCE • Temperature Controller: HUICHUAN • Auxiliary Relay: OMRON • Contactor: Schneider from France • Electric Motor: Three-phase 380V • Power Source: TAIWAN MEANWELL • Transducer: ABB from SWITZERLAND Hydraulic Parts: • Oil Pump: TAIWAN HIGH-TECH • Valve: YUKEN • Oil Pump and Connection: YUKEN • Sealed Part: HALLITE Air Control System: • Cylinder: AIRTAC • Air Valve: AIRTAC This blow molding injection machine was purchased directly from a factory in China for a specific project that was never realized. The machine was used for only one month. Location: Siemianowice Slaskie, Poland We also have peripheral equipment available for sale, such as: • 5 HP AIR COOLING SYSTEM • Auto Loading • 150 kg Color Mixer • Scraps Crusher

Year of construction: 2023, condition: new, functionality: fully functional, The SHAMP-3200 single-head stone polisher, automatic polisher, is a professional machine that is used for polishing, grinding and brushing the stone surface and calibrating the thickness using diamond wagons. The monoblock construction ensures no additional costs such as pouring foundations for the table. An additional advantage is the ability to move the machine to another place at any time and the ease of installation. The single-head, bridge-type stone polisher is convenient to use and allows for quick and effective polishing work on most stone surfaces. The slide is guided by a linear guide immersed in oil, with long service life, high machining accuracy and an advanced control system. The machine is equipped with a PLC controller and high-quality components: Xinje touch screen, Zhengtai contactor, Schneider switching power supply, Omron relay, Omron proximity sensor. In the SHAMP-3200 polishing machine we can process stone with a thickness of 10-120 mm. Grinding head with the possibility of mounting 6 polishing wagons. Pneumatic pressure with an air demand of 0.6m³. Z axis travel equal to 110mm. The limit switches are set manually. Hnodpfx Agog Iph Rs Ujg The machine has a tilting work table up to 85° (hydraulic lifting), which greatly facilitates the loading of stone in machines of this type. This allows for easy and quite precise positioning of the stone in the appropriate position for grinding. The machine uses separate inverters to regulate the feed speed on the X axis and the Y axis. Their power is appropriately adjusted, so you can precisely control the axis feed speed, which is particularly useful in this type of stonemasonry machines.

Condition: used, Year of construction: 2010, functionality: fully functional, Max. working temperature 90° C. Hedpfxotywzqs Ag Ujng Max. working pressure: 2 kg/cm². Power 3.000.000 kcal Fuel: wood waste The MTN boiler is a hot water generator that uses sawdust as fuel, with "AUTOFOCO" type burner loading. The boiler is of horizontal type Tubular plates and shell are made of thick carbon steel sheet. The core is covered with refractory cement with a high percentage of alumina. At the rear there is a cast iron grate for burning solid pieces of wood, calculated for an output equal to 60% of the rated output of the boiler. The tube bundles are made of carbon steel. The base incorporating the hearth is of large dimensions, to allow the burner to be mounted with a plug. The boiler is supplied with an air distribution manifold. The boiler body is insulated with mineral wool and covered with cast iron Accessories: - 1 Adjustable thermostat - 1 safety thermostat - 1 safety thermostat with manual start - 1 thermometer - 1 hydrometer - 1 combustion control device - 1 thermostatically actuated valve positioned in the flue tube MANUAL FEED GRILL is a fixed grill made of special nodular cast iron bars, fixed in refractory material, easily interchangeable. 1 Complete electrical components, motor protections, contactors. 1 Complete set of wiring accessories 1 General circuit breaker 1 Power supply for auxiliary circuits 1 Circuit diagram 1 Pressure gauge 2 Temperature probes 1 Dust suction system consisting of a fan with belt transmission, with decanter cyclone, boiler-cyclone connections, cyclone-fan, fan-fan, fan-smoke stack, in painted carbon steel. 1 Chimney

Condition: good (used), Year of construction: 1996, functionality: fully functional, KRÜSI chalet building machine / log house production line type CM 40 Year of construction 1996 Krüsi CM40, consisting of the following components: Circular saw ( cross-cut saw ) Horizontal and vertical log house router Groove milling machine (horizontal) boring mill Infeed table 6m Outfeed table 6 m KRÜSI chalet building machine / log house production line type CM 40 Manufacturer Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of manufacture 1996 CE-marked Condition: good, technically checked and cleaned / ready for use Functional principle Processing of wood for chalet construction / log house construction The beams can be processed in a single operation - Cutting to length Hsdovfv Tfopfx Ag Ueng - Horizontal and vertical milling of necks / grooves in one clamping operation - Drilling - Milling the face grooves Workpiece: - Cutting height max. 200mm - Cutting width max. 250mm Robust construction in welded design. Machine (horizontal and vertical milling unit) with 4 special milling motors, with hardened and ground guides for maximum machining accuracy. Slide guidance with dust-protected and preloaded ball-bearing rollers. Working range up to 200 x 250 mm. Completely ready for use, with contactor control, motors protected by thermal relay. Electrical equipment for voltage 380 V, 50 Hz, with protective covers, Central connection for on-site chip extraction, with 2 eccentric clamps, without milling tool (folder). With hydropneumatic horizontal and vertical feed, electrically controlled, together with the start-up of the milling motors. Rapid traverse and feed infinitely variable. Fully wired and installed, including air maintenance unit. Patches with a thickness of more than 14 cm must be processed in two tensions. Machine description / equipped with: 1. sawing unit: Manual feed Spindle adjustment with analog dimension display Saw blade-Ø max. / bore-o 400 / 30 mmm Carbide-tipped with cutting depth limiter (synchronous operation) Adjustable riving knife Motor speed min. 1 / 2900 Power kW 2.2 2nd CM milling unit ( log house unit ) Hydropneumatic feed Spindle adjustment with digital dimension display Horizontal trimming unit Milling cutter Ø 180mm Milling cutter width max.130mm From cutter width 60 mm only use aluminum alloy cutters with reversible cutting edges 2 hydropneumatic feed motors kW 2.2 each Hydropneumatic feed Rapid traverse and work feed infinitely adjustable 3rd drilling unit: Manual feed Spindle adjustment with analog dimension display Drill holder collet ER 25 Clamping Ø max. mm 16 Drill Ø max. mm 32 Motor min'1 1450, kW 1.8 4. face milling unit Hydropneumatic feed Spindle adjustment with digital dimension display Cutter Ø max. mm 230 Cutter width max. mm60 Motor min1 / 2900, kW 3.0 2 V-belts SPZ 9.5x1000 La Pneumatic Operating pressure on site min/max MPa (bar) 0.7/1 (7/10) Air consumption Nm3/h 8 Electrical system Operating voltage V / Hz 380, 50 Rated power kW 8.8 -15.8 depending on version On-site back-up fuse A 3 x 25 tr