Used Reflection Densitometer for sale (579)

Condition: used, This listing is for 1 of 2 Biorad Gs-900 Calibrated Densitometer The unit is in full working condition and is ready for immediate release The GS-900 Calibrated Densitometer is a self-calibrating 21 CFR Part 11 gel imaging system designed for acquiring gel, blot, and film images. It is capable of reproducibly imaging gels, blots, and film and quantitating proteins across a wide dynamic range. The system uses transmissive and reflective imaging to scan chromogenic samples at the optimal detection wavelength, and its three-color red, green, and blue CCD imaging technology enables accurate, reproducible quantitation with a wide variety of common stains. Key Features: Imaging Capabilities: Transmissive and reflective imaging for gels, blots, and film. Gedpfxexv D Dcs Aivskc Dynamic Range: Wide dynamic range for accurate quantitation. Imaging Technology: Three-color red, green, and blue CCD imaging. Calibration: Self-calibrating for consistent performance. Compliance: 21 CFR Part 11 compliance for regulatory environments. Included Components Scanner and Cables: Comes with the necessary scanner and cables for operation. Optional Software: Image Lab™ Software: PC-compatible software for image analysis. 21 CFR Part 11 Module: Security edition software for compliance with 21 CFR Part 11. Installation and Operations Qualification (IQ/OQ) Kit: Optional kit to meet cGMP environment needs. Specifications: Scan Area: 29 x 33 cm (transmissive and reflective) Wavelength: 400 – 750 nm Bit Depth: 16-bit grayscale

Condition: used, This listing is for Specac Quest Single reflection ATR FTIR Accessory Gksdpfx Asztqgxeivjc The unit is in full working condition and ready for immediate use The Specac Quest is a high-performance single-reflection ATR accessory designed for mid- and far-infrared spectroscopic sample analysis, featuring interchangeable crystal pucks and durable optic Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. [[1]()]

Condition: used, This listing is for a Grant Bio McFarland DEN-1 Densitometer The unit is in full working condition and is ready for immediate release. The DEN-1 is a compact benchtop turbidity/densitometer instrument manufactured by Grant Bio (part of Grant Instruments). It is designed primarily for life-science and microbiology applications — for example, measuring the turbidity of cell suspensions (bacterial, yeast) or other particulate suspensions. Typical uses include: Godpfxsxup Nhe Aivskc Determining cell concentration in fermentation or culture processes Assessing microbial susceptibility (via turbidity changes) Identifying microorganisms in test systems Measuring optical density / turbidity at a fixed wavelength for dyes or suspensions

Condition: excellent (used), Year of construction: 2016, ELOPAK Shikoku S-PS60EC Carton Filling Machine Year: 2016 The ELOPAK Shikoku S-PS60EC is a reliable, industrial-grade carton filling machine designed for the forming, filling, and sealing of gable-top cartons for liquid food products. Manufactured by Elopak in cooperation with Shikoku Kakoki, this machine reflects the proven engineering and hygiene standards for which both companies are globally recognized. Key Capabilities: -Gable-top carton forming, filling, and sealing in a single integrated system -Suitable for liquid products such as milk, juices, water, and other chilled beverages -Designed for medium-to-high output production, typically up to ~6,000 cartons per hour (depending on configuration and carton size) Gkedsyxgxkspfx Aivjc -Compatible with common carton volumes, generally ranging from 250 ml to 1,000 ml -Blank-fed operation with precise carton forming prior to filling -Hygienic & Robust Design The S-PS60EC is built for food-grade production environments, featuring: -Stainless steel construction in product contact areas -Hygienic design suitable for dairy and beverage applications -Automated filling accuracy and consistent sealing quality -Designed for clean-in-place (CIP) integration, depending on configuration Cartoning Machine is located at former dairy in the South of Ireland. The machine is still on location and viewing can be arranged. The site is reachable by Shannon International Airport & Cork International Airport. Contact for more information.

Condition: like new (used), 10 - 30 V DC , 200 mA switchable, with on/off delay Length: 85 mm Diameter: 30 mm Gedpfx Aiszfghpjvjkc Weight: 205 g Condition: like new

Condition: good (used), functionality: fully functional, Year of construction: 1987, machine/vehicle number: 8142, control type: manual, Equipment: emergency stop, foot remote control, Thalmann Pico 150 / 6.2 The Thalmann Pico 150-6.2 is a hydraulic long bending machine (swing bending machine) manufactured by the Swiss company Thalmann. The model designation directly reflects the key specifications: a maximum sheet metal thickness of 1.50 mm for steel and a working length of 6.2 meters. Technical data at a glance: • Working length: 6,200 mm • Maximum sheet metal thickness (steel, 400 N/mm²): 1.50 mm • Maximum sheet metal thickness (aluminum, 250 N/mm²): 2.00 mm • Insertion depth / overhang: 1,000 mm • Maximum bending angle: 145 degrees • Equipment: with electric hydraulic roller shear (motor shear) Gedpfoz Hiw Tox Aivskc • Total weight: approx. 2,800 kg • Power requirement: 3 kW The machine is in good condition. Available immediately. Inspection possible by appointment. Price includes dismantling and loading onto a truck.

Condition: used, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 13013, cutting width (max.): 2,150 mm, overall weight: 370 kg, type of input current: AC, total width: 2,960 mm, total height: 1,330 mm, working width: 2,150 mm, total length: 970 mm, input voltage: 230 V, input frequency: 50 Hz, cutting speed: 120,000 mm/min, power: 0.65 kW (0.88 HP), Equipment: safety light barrier, FLEXA MIURA PLUS 2.2 – Automatic XY Cutting Machine with Edge Control | 2023 | Excellent Condition Professional automatic XY cutting machine for flexible roll-fed materials, featuring optical registration mark recognition, automatic longitudinal cutting correction (Edge Control) and programmable cutting functions. Gsdpfoz Ng Atjx Aivokc Manufactured in September 2023, this FLEXA MIURA PLUS has been used for only a few months and is in excellent condition. The machine was highly appreciated in our production for its reliable operation, precise cutting and intelligent control system. Reason for sale: No longer required in our production. Initially retained as a backup machine, it is now available for sale. MAIN FEATURES Automatic longitudinal and cross cutting (XY) Automatic longitudinal cutting correction (Edge Control) Optical registration mark recognition for accurate positioning Automatic compensation for deviations in printed material alignment Programmable cutting parameters via touchscreen Automatic cutting based on printed registration marks Cutting to predefined lengths Manual cutting mode Adjustable material feeding speed and cutting pressure Efficient roll-fed processing for repetitive cutting operations Easy operation and low-maintenance technology The Edge Control system automatically corrects longitudinal cutting alignment during material processing, improving accuracy even when minor feeding or print alignment deviations occur. The machine is particularly suitable for automated cutting of printed rolls containing multiple images or repeated jobs, reducing manual handling and improving production efficiency. TECHNICAL SPECIFICATIONS Manufacturer: FLEXA S.r.l., Italy Model: MIURA PLUS 2.2 Machine type: Automatic XY cutter Manufacturing date: September 2023 Serial number: 13013 Working width: 2,150 mm Maximum cutting thickness: 1.2 mm Material feeding speed: 1–30 m/min Cross-cutting speed: 5–120 m/min Maximum roll diameter: 300 mm Maximum roll weight: 60 kg Supported longitudinal cutting units: Up to 8, depending on configuration Power supply: 220–240 V, 50/60 Hz Rated power: 650 W Machine dimensions (W × D × H): 2,960 × 970 × 1,330 mm Machine weight: 370 kg SUITABLE MATERIALS Paper and laminated paper Posters and printed advertising graphics Self-adhesive vinyl PVC banners and flexible display media Backlit and frontlit materials Wallpaper Reflective films Canvas and polyester-based materials with suitable backing Other compatible flexible roll-fed media Material suitability depends on thickness, rigidity and cutting characteristics. APPLICATIONS Large-format printed graphics Posters and advertising materials Self-adhesive graphics Wallpaper production Display and exhibition graphics Flexible signage materials Repetitive roll-to-sheet cutting operations CONDITION AND AVAILABILITY Manufactured in September 2023 Used for only a few months Excellent condition Fully functional Available in Budapest, Hungary Inspection and demonstration can be arranged by appointment, subject to operational availability. The machine is being sold solely due to a change in our production equipment, not because of technical problems.

Condition: good (used), Year of construction: 1992, functionality: limited functionality, machine/vehicle number: 1200, Hundegger P10 – Year of manufacture 1992 – partially modernized control system – good mechanical condition For sale: well-maintained Hundegger P10 cutting machine, year of manufacture 1992, with extensive equipment. Mechanical components in good condition, control system modernized (data import via USB drive, DOS conversion). 3 measuring scales are missing – the price reflects this. The machine is currently still in operation and can be tested on-site. Technical equipment: Swivel saw, notching milling cutter, rafter nail drilling unit, edge bender, blade milling cutter, horizontal and vertical drill Three-sided cutter, vertical milling cutter, finger cutter, panel cutter, ejector and transverse conveyor For an additional charge, the machine can be delivered throughout Europe – Delivery does not include unloading or assembly. Gkedpfxezu Anws Aivoc Currently, the cutting system is being dismantled for transport and temporarily stored. A demonstration in operation is no longer possible. However, a video in processing mode can be provided for a better assessment.

Condition: good (used), Year of construction: 2006, operating hours: 20,000 h, Trumpf Haas HL 4006D YAG solid-state laser The Trumpf Haas HL 4006D is a 4000W Nd:YAG solid-state laser designed for industrial applications such as welding highly reflective materials, particularly for use with robots and a range of up to 100 meters via flexible fiber optics. Application areas: Welding: The main application is welding metal parts, especially highly reflective materials such as aluminum and copper, where other lasers are difficult to use. Automated manufacturing: The laser is designed for integration into automated production lines with industrial robots. Precision machining: The high power and precise beam quality enable precise work in industrial machining. Technical data: Manufacturer: Trumpf Haas Type: HL 4006D Rated laser power: 4000 W Beam quality: 25 mm.mrad Wavelength of laser light: 1064 nm Rated voltage: 400 V Rated power: 132 kW Rated power consumption: 140 kVA Year of manufacture: October 2006 Weight: 1500 kg Operating hours: approx. 20,000 Dimensions W x H x D: 3200 x 1700 x 1250 mm Laser optics incl. ILV scanner, pyrometer, and various spare parts Computer with WinLas software for controlling parameters You can find the matching cooling unit and robot in our shop: Gkodpfx Asxg Hpcoivoc Rehsler TW HL4006D cooling unit Kuka KR 30/2 6-axis welding robot You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: ready for operation (used), Year of construction: 2022, operating hours: 2,044 h, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D sl, laser power: 6,000 W, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, number of axes: 3, This 3-axis TRUMPF TruLaser 5030 fiber L76 FMC was manufactured in 2022. It features a working format of 3,000 x 1,500 mm and a powerful 6000W solid-state disk laser. The machine includes an automatic longitudinal pallet changer and advanced cutting capabilities, such as adaptive lens systems and automatic nozzle changers. If you are looking to get high-quality fiber laser cutting capabilities, consider the TRUMPF TruLaser 5030 fiber L76 FMC machine we have for sale. Contact us for further details. • Working format/area: 3,000 x 1,500 mm; X 0–3,000 mm / Y 0–1,500 mm / Z 0–115 mm • Machine design: Closed machine frame; gantry drive with direct linear drives; automatic longitudinal pallet changer; integrated control cabinets and storage cabinet; working-area lighting; machine status light; water/air machine and laser chiller; CE compliant; ambient temp 5–35 °C • Dynamics/accuracy: Max simultaneous axis speed 280 m/min; Ps 0.03 mm; Pa 0.05 mm; min programmable increment 0.001 mm Gsdpezuzwdsfx Aivskc • CNC control: Siemens SINUMERIK 840D sl with 21.5" color MultiTouch; MultiTouch HMI; USB and RJ45; integrated technology data; programmable cutting gas/pressure; production planning; multi-sheet processing; automatic shutdown; Remote Support interface; Condition Guide; Cutting Guide; Central Link; Online Update Manager • Laser source: TRUMPF TruDisk 6001 (6 kW) solid-state disk laser; fiber-optic beam delivery; one LLK output; closed beam guidance; high back-reflection resistance; stable output over service life • Cutting head: Universal cutting unit; single cutting-head strategy; adaptive lens system; protective glass with online condition monitoring; auto nozzle centering; collision protection; capacitive height control; automatic focal position; pilot laser • Standard cutting functions: AdjustLine; BrightLine fiber; ControlLine; FastLine; FlyLine; FocusLine; NitroLine; PierceLine; Performance package; Highspeed cutting package; Copper and Brass cutting packages; Micro-weld • Additional cutting package: Highspeed Eco (fusion cutting, medium-thickness stainless steel) with up to 70% cutting-gas reduction and up to 100% sheet throughput increase • Automatic nozzle changer: 21 positions; automatic change/cleaning/re-setting tied to material/process; reduces setup/handling • Drop&Cut: Integrated camera; assigns live image of residual sheet to part geometry; live cutting preview; no separate programming needed for basic use • Process monitoring camera: Front-area monitoring (~2.5 m); remote observation; preliminary result assessment; video stream output to external monitor • Pallet/material handling (machine-integrated): Automatic longitudinal pallet changer; loading/unloading parallel to machining; pallet access from three sides • 1 x license TruTops Boost Additional equipment • LiftMaster Compact 1530 (AL34) automatic loading/unloading system • Type 1530; max sheet 3,000 x 1,500 mm; min sheet 1,000 x 1,000 mm • Max sheet thickness 25 mm; max sheet weight 900 kg; max unloading weight 900 kg • With rake lifter: max thickness 25 mm; with rake lifter + belt system: max thickness 15 mm • Minimum part size with rake lifter: 150 x 150 mm • LiftMaster equipment/options • Storage connection; extended pallet travel out of machine • Sheet separation device; double-sheet detection; synchronous loading • Thin-sheet separation (0.8–2.0 mm); loading station for 90 mm stack height • Structural-steel loading grippers, 67 mm pitch, replaceable tines

Condition: excellent (used), machine/vehicle number: 27639, Part: 3265 - 36.21.43 Gkodpfx Asymnlaoivjc

Condition: used, mileage: 264,549 km, power: 61 kW (82.94 HP), first registration: 11/2004, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,550 mm, fuel: diesel, color: white, gearing type: mechanical, number of gears: 5, emission class: euro3, total length: 5,650 mm, total width: 1,960 mm, total height: 2,500 mm, loading space length: 3,240 mm, loading space width: 1,900 mm, loading space height: 1,440 mm, Year of construction: 2004, Equipment: ABS, full service history, power assisted steering, General information Number of doors: 2 Model range: May 2001 - Jul 2006 Model code: ### Cab: single Technical information Torque: 200 Nm Number of cylinders: 5 Engine capacity: 2.461 cc Weights Empty weight: 1.930 kg Gsdpfx Ajz Iwuvjivskc Carrying capacity: 870 kg GVW: 2.800 kg Functional Make of bodywork: van Stenis Carrosserie Interior Interior colour: grey Maintenance, history and condition APK (MOT): tested until 02/2027 Number of keys: 2 Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Additional options and accessories = - Controlled slip differential - Front headrests - Heat reflecting glass - Immobiliser - Tinted glass

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT21201011210, empty load weight: 3,420 kg, maximum load weight: 8,380 kg, overall weight: 11,800 kg, axle configuration: 2 axles, first registration: 07/2021, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, total length: 9,490 mm, total width: 2,550 mm, total height: 3,900 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 60 %, Year of construction: 2021, Please note: the images are archive photos. The vehicle may currently be in use! # Chassis – centre-axle trailer - Fine-grain steel welded construction, "10-year warranty against rust-through" - Outer frame slightly inclined with "Load-Lock-Profil" for attaching lashing straps - Gear-driven landing leg at front, folding rear support, side door stays - Steel rear underrun protection, rear corner impact protection - 1 spare wheel carrier for 1 spare wheel, with wheel fixing kit - Plastic toolbox with drawer and shelf, W=650 / H=520 / D=670 mm, lockable with padlock (padlock not included) - Without ramps - Platform height 1080 mm – observe overall height! # Towing device – centre-axle trailer - Drawbar with certified 40 mm towing eye, haulage version - Drawbar mechanically height-adjustable via threaded spindle, below floor level, max. adjustment range 200 mm - No drawbar length adjustment # Axles + suspension - BPW drum brake axles, air suspension - Axles/running gear laser-aligned – reduces tyre wear and fuel consumption # Braking system - Dual-line compressed-air braking system, colour-coded lines for easy servicing - Spring-brake parking brake - Duomatic connection at front, with connecting line to towing vehicle - EBS with EBS connector at front, with connecting cable - Caution: the trailer may only be towed by vehicles ensuring the effectiveness of the ABS! - Raise/lower valve, vehicle stability system # Wheels and tyres - 235/75 R17.5, make at manufacturer's discretion, steel rims factory silver # Electrics - 24 V, multi-chamber lamps, yellow LED side lighting - 2 white front position lamps, 2 white/red outline marker lights at rear - 1 x 15-pin connector at front, with connecting cable # Floor - Film-faced plywood approx. 30 mm, for high point loads - Floor rated for forklift loads up to 2900 kg - Platform length approx. 7300 mm # Front wall / front corner posts - Through-loading system with front portal doors, double-leaf, each with 2 internal cam-bar locks - Steel corner posts, release device for side curtain - Bridge plate approx. 2400 mm wide, divided once, approx. 350 mm long to rest on tail lift, capacity approx. 1800 kg, incl. tail lift support - (Drawbar length then approx. 2100 mm; for 1800 mm tail lift, truck coupling set-back min. 20 to max. 240 mm) # Centre stanchions - 1 pair of sliding stanchions, movable over full length, with fourfold slat pockets and long pocket at bottom - 1 pair of fixed stanchion positions # Insert slats - 5 rows of aluminium V-slats # Rear wall / rear corner posts - Steel rear corner posts up to roof underside - Curtain attachment with round tube, curtain tensioning ratchet - Rear portal doors, double-leaf, each with 2 internal cam-bar locks # Curtain - Welded-in horizontal and vertical straps, stainless steel tensioning buckles # Roof - Sliding roof, slides from rear to front - Rear end carriage folds upwards - Curtain colour: white - Optimised rain gutter at rear, on top of rear bow above doors # Country of registration / plates - Germany, with DEKRA inspection and expert report (acc. to §13 EG-FGV) - 24/7 service hotline - Fliegl manufacturer's certificate for body strength acc. to EN 12642 XL Gjdpsz R Afysfx Aivekc - Prepared for single-line number plate holder - White reflective strips: along bottom of side curtains and at top corners - Red reflective strips: around rear portal

Condition: used, maximum load weight: 13,460 kg, overall weight: 16,000 kg, first registration: 01/2012, loading space length: 7,280 mm, loading space width: 2,480 mm, loading space height: 2,625 mm, loading space volume: 47 m³, total width: 2,550 mm, total height: 2,900 mm, Year of construction: 2012, Vehicle no. G0123213_SAMPLE - Manufacturer: Krone. * Sliding roof tarpaulin * Reflective contour marking on side/rear * Load certificate Code-XL * Portal doors with double locking bars (inside) * Sliding side curtain * Suitable for forklift driving inside * Telescopic support legs * Equipment for rail loading Gkedpfxez A Rkme Aivjc * Lashing options LASI CODE XL!!! Multiple units available! Delivery time upon request! Multi Lock external frame. New tarpaulin. Steel insert slats with integrated combination lashing rail (slotted/perforated). Technically ready for operation with no further repairs required. Partial repainting. Undercarriage with signs of use. UVV valid. Dimensions are approximate. Offer is subject to prior sale, prices quoted are net ex location D-59302 Oelde. Further details on request by phone or email:

Condition: used, Year of construction: 2021, functionality: fully functional, input voltage: 230 V, total width: 830 mm, total length: 870 mm, total height: 1,710 mm, overall weight: 150 kg, operating temperature: 60 °C, compressed air connection: 6 bar, Lorenz FMP04 Filter Test System, 2021 – EN 143/149, ISO 16900-3 – €47,900 net, negotiable Test respirator filters and masks (FFP and medical face masks) in-house instead of paying for lab time: the Lorenz FMP04 automatic filter test system measures filter penetration and breathing resistance in a single run, with results available within seconds. New price currently: approx. €95,000 net. Your price: €47,900 net (negotiable), ex works (EXW) Hamburg. One unit only, lightly used. What you get: • Standards-compliant testing according to EN 143, EN 149, ISO 16900-3, ISO 17420-2, and NIOSH 42 CFR Part 84; all parameters adjustable for customer-specific tests. Godpfx Aez Inf Ssivekc • Two laser aerosol photometers (upstream and downstream) with automatic reference calibration and auto-ranging across six orders of magnitude. • Aerosol generator using paraffin oil heated to 60 °C, automatic oil supply from external reservoirs, software-based switching between standards. • Quick-change filter holder, Ø 112.8 mm (100 cm²), face velocity 5–40 cm/s, automatic flow reversal; canister filter adapter plate. • Extension for differential pressure testing per EN 14683 Annex C.4 (surgical masks) with adapter plates (2.5 cm bore); a €1,836 option in 2021. • 15" full-HD touchscreen, integrated PC, filter database, test history, CSV export, test reports with your logo, graphs for loading tests; USB and network. • Flow 8–300 l/min, efficiency 0.0001–100 %, breathing resistance 5–1,000 Pa (manufacturer data for the FMP04 series). • Scope: all adapter plates and accessories are included. Specifications: built 2021, approx. 150 kg, 870 × 830 × 1710 mm, 115/230 V. Requires compressed air ≥ 6 bar, ≥ 50 l/min (oil-, water- and particle-free). Please note: service is due. The unit has seen little use. Service and recalibration are due and are already reflected in the price. Why act now? Inspection and a test run in Hamburg can be arranged. Sold ex works (EXW) Hamburg. Inquire today: response within one business day. Price negotiable. Location: Hamburg, Germany.

Condition: used, mileage: 270,000 km, power: 92 kW (125.09 HP), first registration: 08/2014, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, Year of construction: 2014, Equipment: ABS, central locking, soot filter, Nissan NV 400 box van, L2/H2 New TÜV inspection German vehicle Top condition Trailer hitch, 2500 kg Shelving system Gkedpfx Aezu Eknsivec Special equipment: Cool & Sound package, rear wing doors with glazing (opening angle 270 degrees), sliding door for cargo/passenger compartment on the right with glazing Additional equipment: Storage compartment, driver's airbag, exterior mirrors electrically adjustable and heated, design and equipment line PRO, tachometer, electronic brake-force distribution (EBD), rear glazing package, body/superstructure: high-roof standard box van, fuel tank: 80 liters, steering column (steering wheel) height adjustable, engine 2.3 liters - 92 kW dCi Diesel catalytic converter, rear fog light, wheelbase 3682 mm, spare wheel with road tires, low emissions according to emission standard Euro 5, gear shift indicator, mud flaps at the front, seats in the driver's cab: double passenger seat, 12V socket in the cargo/passenger compartment, partial glazing, rear step, heat-reflecting glazing with UV protection * Sales consultant information * + * AN APPOINTMENT IS REQUIRED FOR A TEST DRIVE OR INSPECTION * + * Trade-in and financing possible. * Errors in the description cannot be ruled out. * Please verify the equipment of the vehicle. Subject to errors, omissions, and prior sale.

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, This machine was traded in by a customer after they purchased a new machine from BVM Brunner. It had been running at this customer for 25 years, originally supplied by Nodema. We have checked the machine and replaced what needed to be replaced. The machine is not fully refurbished, but it has been inspected; this is reflected in the price. Gkedpfeylnh Sex Aivec

Condition: new, Year of construction: 2017, height / mm working width / mm distance to reflector / mm Gsdpfez Dxtfex Aivskc

Condition: new, Year of construction: 2017, height / mm Gsdoyn R Rujpfx Aivskc working width / mm distance to reflector / mm

Condition: used, mileage: 153,403 km, power: 85 kW (115.57 HP), first registration: 02/2021, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,320 mm, fuel: diesel, CO₂ emissions: 266 g/km, fuel tank capacity: 71 l, color: white, gearing type: automatic, number of gears: 7, number of seats: 2, total length: 6,970 mm, total width: 2,020 mm, total height: 2,830 mm, Year of construction: 2021, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, full service history, onboard computer, power mirror, sliding door, start-stop system, tire pressure monitoring, General information Number of doors: 5 Model range: Jun 2018 - Dec 2021 Cab: single Technical information Torque: 300 Nm Number of cylinders: 4 Engine capacity: 2.143 cc Weights Empty weight: 2.307 kg Carrying capacity: 893 kg GVW: 3.200 kg Interior Interior: black Environment Emission class: Euro 6d Consumption Average fuel consumption: 7,8 l/100km (36 MPG) Urban fuel consumption: 7,5 l/100km (38 MPG) Extra urban fuel consumption: 8 l/100km (35 MPG) Maintenance, history and condition Number of owners: 2 Number of keys: 2 (2 hand transmitters) Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Additional options and accessories = - 12 volt socket - Automatic dipped headlights - Blind spot monitoring - Driver's airbag - Driver drowsiness detection - Electrically adjustable door mirrors - Electrically folding door mirrors - Electrically operated front windows - Front central armrest - Heated door mirrors Gjdpfx Aez Iwv Hjivekc - Heat reflecting glass - Height adjustable driver's seat - Height adjustable front seats - Height adjustable steering wheel - Immobiliser - Keyless start - Multifunctional steering wheel - Paddle shifters - Partition - Radio with DAB - Rain sensor - Remote central locking - Reversing camera - Sliding side door right - Telephone enabled with Bluetooth

Condition: used, functionality: limited functionality, machine/vehicle number: NM0KKXTP6KNA91285, mileage: 69,672 km, power: 243 kW (330.39 HP), fuel type: diesel, overall weight: 18,000 kg, tire size: 315/80 R22.5, axle configuration: 4x2, wheelbase: 4,750 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, emission class: euro6, suspension: steel-air, number of seats: 3, permissible axle load (axle 1): 8,000 kg, Year of construction: 2023, operating hours: 2,081 h, Equipment: ABS, EBS, cruise control, electronic stability program (ESP), power assisted steering, tail-lift, truck registration, FORD TRUCKS 1833 DC 4x2 – BOX TRUCK WITH TAIL LIFT – EXPORT PRICE – SOLD AS IS Ford Trucks 1833 (Road Series) 4x2, manufactured in 2023, with only 69,672 km and 2,081 operating hours. Sold as new and maintained by Herman Noyens Trucks, the official Ford Trucks distributor for Belgium. Gjdpfx Aisz Ebnhjvskc ENGINE / DRIVE TRAIN - Ford Ecotorq 9.0 l, 6-cylinder, 330 hp (243 kW), Euro 6 - Engine brake, PTO (power take-off) - Front axle 8.0 t, air suspension rear, tires 315/80 R22.5 - Wheelbase 4,750 mm, GVWR 18,000 kg CABIN - Day cab (DC), electrically tiltable - Double passenger seat (3 seats), driver's seat with armrest - Manual sunroof, light and rain sensor - Cruise control, ABS/EBS/ESP BODY - Enclosed box body (van) Arslan with side door on the right - Dhollandia tail lift - Side underrun protection - Preparation for trailer (full trailer application) CONDITION OF THE VEHICLE – READ CAREFULLY - Engine and gearbox are in good order. - The vehicle DOES NOT START at the moment: presumably a fuse / electrical problem. Not further investigated. - Damage to the box body: rear and top of the van damaged (see photos), frame of the tail lift damaged, lower side profile and reflective strip damaged. - Vehicle is sold AS IS, without warranty, to be collected in Geel (Belgium). - Price is an export price: EUR 25,000 excl. VAT (EXW Geel). Belgian registration 2-ELZ-411. Chassis number NM0KKXTP6KNA91285. All documents available.

Condition: used, mileage: 179,441 km, power: 115 kW (156.36 HP), first registration: 08/2012, overall weight: 7,490 kg, fuel type: diesel, color: white, gearing type: mechanical, emission class: euro5, Year of construction: 2012, number of seats: 4, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, Equipment: * Body/Superstructure: High-roof box van L3H2, * Cab: Passenger compartment (double cab), Gedpsz Edk Eofx Aivokc * Waelo air conditioning, * Auxiliary heater (water) with timer, * Auxiliary heat exchanger in double cab, * Driver's seat with hydraulic suspension, * Co-driver's seat with storage compartment, * Double seat, passenger compartment on the right, * Sliding door on the right with sliding window (entry), * Roof vent in the cargo area, * Hinged doors (opening angle 270 degrees), * Heat-reflecting glazing, * 6-speed manual transmission, * Tow hitch (drawbar), * Ball hitch, Attachments/Installation: * Sortimo workshop equipment, * Ventilation and de-ventilation, * Shelf in the Doka area, * Cotek SP 1000 voltage converter, * Auxiliary headlights, * Cargo area lining, Technology: * Navigation system, * Radio Truckline CD 65 / 70, * Exterior mirrors, electrically adjustable + heated, * Power windows, * Reinforced battery, level 2, * Battery disconnect switch, * High-tone horn, * Rear view camera, * Rotating beacons, Safety/Environment: * Airbag, driver's side, * Differential lock, rear axle, * Engine brake, pneumatically operated, * Suspension: front and rear axle, reinforced leaf spring, * Stabilizer bar, rear axle, * Emission standard EURO 5, Other: * 2 previous owners (re-registration) * German original delivery, * Suspension: leaf spring / leaf spring, * Engine 4.3 L - 115 kW Diesel (OM 904 LA), * Wheelbase 4250 mm, * Permissible total weight 7.49 t, * Data confirmation + COC paper available, Since 1972, your reliable partner for all things automotive/commercial vehicles, located in 28832 Achim, at the Bremer Kreuz. The NutzfahrzeugZentrum Behnke always has approximately 200 vehicles in stock from the areas of vans, commercial vehicles, and construction machinery! We continuously offer attractive financing options at favorable special conditions. If you are interested, we will be happy to create an individual offer for you! We welcome the trade-in of your commercial vehicle/construction machinery. If a new TÜV inspection is desired, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection. The delivery of your "new" commercial vehicle is possible through our external partners for an additional fee. The information provided in advertisements, on the Internet, on price tags, and in pictures is a non-binding description and does not constitute guaranteed characteristics. The seller assumes no liability/warranty for typing and data transmission errors. Listed equipment may need to be checked separately. Errors and prior sale are reserved.

Condition: used, height 1500 mm Gkedpfx Aoy Sup Doivsc working width / mm distance to reflector / mm Safety light curtains Leuze electronic CT90 + CR90 1500/A Set Sender + recipient Set: 1x transmitter - CT90-1500/A 1x receiver - CR90-1500/A Resolution: 90mm Protective Field Height: 1500mm Range: 0-18m Rating: IP65

Condition: new, Year of construction: 2017, height / mm working width / mm Gkodpfx Aieyn R Tvjvjc distance to reflector / mm

Condition: used, height 1500 mm working width / mm distance to reflector / mm Safety light curtains Leuze electronic CT90 + CR90 1500/A Set Sender + recipient Gedpsy Sumvjfx Aivjkc Set: 1x transmitter - CT90-1500/A 1x receiver - CR90-1500/A Resolution: 90mm Protective Field Height: 1500mm Range: 0-18m Rating: IP65