Used Contactor for sale (186)

Condition: good (used), Relays, time relays, heating current monitoring, preheating for generators, contactors, semiconductor contactors, contactors -T: 1.5-30 sec -U: AC/DC 24 V 50-60 Hz Price: per package Ijdpeb A Skljfx Ag Ueal -Quantity: 7x Available -Weight: 0.2 kg

Condition: new, Siemens 3TF53 22-1DB4 contactor 110kw 400V AC-3 ,unused in opened original box, 100% working, scope of supply acc. photos Iaedei Eda Hjpfx Ag Uol

Year of construction: 1973, condition: like new (used), Used BRONX Heavy Duty Initial Pinch Pyramid bending rolls. Year of manufacture : 1973. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION CAPACITY Two sets of dimensions which are shown below as "Prebending & Rolling" and then "Rolling only". Material Mild Steel Mild Steel Tensile strength 28/32 tons/sq.in 28/32 tons/sq.in Maximum width 11’(3350mm) 11’(3350mm) Maximum thickness at this width 2” (50mm) 2½” (63.5mm) Minimum inside diameter of rolled cylinder at maximum capacity 30’ (762mm) 37 ½’ (953mm) Maximum thickness of plate when hot rolling (finished rolling temperature 850° C.) 4” (102mm) 5” (127mm) Minimum inside diameter of rolled cylinder at maximum capacity hot rolling Isdpeh U Rzgsfx Ag Ujal 40” (1016mm) 50” (1270mm) MAIN PARTICULARS Diameter of all rolls - 27” (686mm) Body length of rolls - 11’2”(3403mm) Rolling speed - 12 f.p.m. (3600mm/min) Main drive motor - 150 H.P. Slip Ring Type Two bottom roll adjusting motors, each - 50 H.P. Slip Ring Type Combined operation of swing down bearing and top roll counterbalance - Hydraulically applied Hydraulic power pack motor - 10 H.P. Electrical equipment to be suitable for operation on a supply of - 400/440 volts, 3 phase, 50 cycles CONE ROLLING ATTACHMENT: To facilitate the rolling of taper or conical forms, a skid plate is fitted to the inside of the non-drive end housing. ELECTRICAL EQUIPMENT Motors: Main Drive - 150 H.P. half hour rated – slip ring screen protected – foot mounted type. Bottom Roll Adjustments - 50 H.P. half hour rated – slip ring screen protected – foot mounted type. Hydraulic Power Pack Motor - 10 H.P. continuously rated – Squirrel cage – screen protected – foot mounted type. Control Gear: Main Drive - Drum type reversing control gear with 5 minute rated wire wound resistances, designed to pass 100% full load on the first notch or operating position in each direction. The controller will be fitted with off position interlock and limit switch rings where necessary. Bottom Roll Adjustments - Drum type reversing control gear with 5 minute rated wire wound resistances designed to pass 100% full load on the first notch or operating position in each direction. The controllers will be fitted with off position interlock and limit switch rings where necessary. Hydraulic Power Pack - Direct-on-line contactor type starter, operated from a maintaining type push button station. Solenoid valves for operating cylinders are push button operated. Note: Full protection to be provided for all the above control gear by a circuit breaker, incorporating overload and no-volt protection. FEATURES AND EQUIPMENT Spare Roll included with the machine. LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 95 tonnes NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: used, Year of construction: 2017, liter capacity 980 l Pressure of pump 8 / 20 / 80 bar control Schütze / Contactors weight of the machine ca. 765 kg dimensions of the machine ca. 2,3 x 2,0 x 1,8 m Coolant System MAYFRAM - DPF400-V980 SKD (BFU 980 /S/20+/8) - NEW, unused - universally applicable - can be controlled via contactors - incl. paper band filter Iasdsx Ak Eyspfx Ag Usl - Number of pumps: 3 - Pump capacity: 4.0 kW, 2,917 rpm, 5.8 m³/h, 96.6 l/min, pressure 25 bar, max. temp. 90°C 3.0 kW, 3,514 rpm, 20.5 m³/h, 341.66 l/min, pressure 25 bar, max. temp. 90°C -.- kW, 2,864 rpm, 2.0 m³/h, 33.3 l/min, pressure 25 bar, max. temp. 90°C

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1845/455, Completely refurbished: Mechanics, geometry, hydraulics, and electrical components Wheelhead Disassembly, cleaning of parts, replacement of worn and defective components, motor overhaul, replacement of bearings, replacement of belts, spindle disassembly, replacement of seals and O-rings, plus adjustment. New paintwork. Iaedpfx Agoxt Ilfj Uol Workhead Disassembly, cleaning of parts, replacement of worn and defective components, motor replacement, replacement of belts. New spindle bearings. New paintwork. Tailstock Disassembly, cleaning of parts, replacement of worn and defective components, motor replacement, replacement of belts. New spindle bearings. New paintwork. Internal grinding attachment Disassembly, cleaning of parts, replacement of worn and defective components, installation of the support and geometry alignment. New paintwork. Hydraulics Disassembly, motor replacement, hose replacement, defective and worn parts replaced. Hydraulic block checked. X-Axis Disassembly, replacement of worn items such as O-rings, seals, rings, etc., overhaul of hydraulic piston, regrinding of tables. Z-Axis Disassembly, regrinding of tables, replacement of worn and defective parts, overhaul of hydraulic piston, scraping of V and flat guides. New paintwork. Measuring system Digital 2-axis display included. Electrical cabinet Replacement of motor contactors and relay controls. New wiring. New variable speed drive (frequency inverter) for the workhead. TECHNICAL SPECIFICATIONS Distance between centers: 1500 mm Distance between centers (workhead to tailstock overhang): 1650 mm Center height, standard: 125 mm Center height with riser blocks: 225/250 mm Maximum grinding diameter: Ø 250 mm Maximum grinding diameter with riser blocks: 450/500 mm Table Usable surface: 2060 x 140 mm Max. length and width for surface grinding: 1750 x 200 mm Longitudinal travel, manual or hydraulic: 1750 mm Manual table movement, 1 handwheel revolution – coarse: 20.006 mm Manual table movement, 1 handwheel revolution – fine: 2.457 mm Table speed, continuously via hydraulics: up to 6 m/min Table swivelling: 6° Stop and return: 0–5 sec. Workspindle Workpiece speeds, continuously variable (electric): 20–400 rpm Swivelling: 360° Workspindle taper (internal): MT5 Tailstock Internal taper, tailstock spindle: MT3 Spindle retraction, manual or hydraulic: 30 mm Diamond dresser taper (internal): MT0 Universal grinding head Cross slide travel for wheel: 285 mm Rapid traverse for wheel slide, front and rear: 40 mm Grinding spindle speeds: 1500 – 1700 – 2200 – 3600 rpm Vertical grinding spindle movement, center heights: 125–330 mm Max. wheel for cylindrical grinding: 400 x 50 x 127 mm Max. wheel for surface grinding: 250 x 20 x 76 mm Head swivelling with locking at every 90°: 270° Wheel feed 1 division of the micrometer drum: 0.005 mm/Ø Automatic wheel feed, max.: 0.9 mm/Ø Motors Grinding spindle motor: 2,900 rpm / 4.0 hp Workspindle motor: 3,000 rpm / 2.0 hp Coolant pump motor: 2,850 rpm / 0.12 hp Internal grinding attachment Bore: 70 mm Internal grinding spindle speed Ø70 mm: 14,000 rpm Internal grinding spindle speed Ø50 mm: 21,000 rpm Subject to error or omission, the technical information is provided without obligation.

Condition: like new (used), Year of construction: 2018, operating hours: 2,700 h, functionality: fully functional, machine/vehicle number: MR24D1056, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 295 mm, workpiece width (max.): 1,050 mm, workpiece length (max.): 800 mm, empty load weight: 3,500 kg, tank capacity: 860 l, Equipment: documentation/manual, For sale: Precision wire EDM machine Mitsubishi MV2400R (year 2018) in excellent technical condition, currently in continuous operation, fully functional and ready for work – very low hours (2,700 spindle hours). Technical data: Year of manufacture: 2018 Manufacturer: Mitsubishi Electric Model: MV2400R Control system: Mitsubishi M700 series Axis travel: X = 600 mm, Y = 400 mm, Z = 310 mm Max. workpiece dimensions: 1,050 × 800 × 295 mm Max. workpiece weight: 1,500 kg Table size: 840 × 700 mm Isdpfx Agsxu Hvlo Uoal Wire diameter: 0.1 – 0.3 mm (currently using 0.25 mm) Positioning accuracy: ±1 μm Complete power supply and cooling system – fully operational Machine dimensions: 2,687 × 3,030 × 2,150 mm Weight: approx. 3,500 kg Equipment and accessories: Original upper and lower wire guides Automatic Wire Threading (AWT) Filtration tank with ion-exchange resin Full set of locating fixtures and base devices (in a case) Wire vertical alignment tool Original documentation and operation manuals Additional equipment purchased for over PLN 40,000: Angular cutting wire guides – upper and lower, 30° Processor battery Precision vise for workpiece clamping Pressure gauge 0–600 PSI – 2 pcs MV power contactor (259320) – 2 pcs CF card with software EDM wire 0.25 mm – 3 new spools 2 sets of new filters Machine transport and handling system Machine condition: Well-maintained, serviced regularly, ready for immediate operation. Complete filtration and cooling systems included. We can assist with transportation, installation, commissioning of the machine, and provide operator training – we have EXPERIENCE. Price negotiable. VAT invoice issued.

Condition: good (used), Semiconductor relays, switchgear, switching components, semiconductor contactors, relays -Manufacturer: Crydom, Semiconductor relays -Type: ELS4850S -Number: 29 relays available -Price: per piece Iaedpfex Hfumsx Ag Uel -Dimensions: 100/50/H130 mm -Weight: 0.5 kg/pc.

Condition: new, Siemens 3TF53 22-1DB4 contactor 110kw 400V AC-3 ,unused in opened original box, 100% working, scope of supply acc. photos Iaedpfx Aji Eda Rjg Ujl

Condition: like new (used), operating hours: 349 h, functionality: fully functional, input voltage: 400 V, input current: 1,037 A, type of input current: AC, input frequency: 50 Hz, protection type (IP code): IP00, year of last overhaul: 2026, continuous power: 630 kW (856.56 HP), Equipment: type plate available, Exact model designation: Schneider MX eco 4V630 Output power and output current: 630kW | 1188A ME4C63AAA ° With test certificate! ° Only 349 motor operating hours - according to the manufacturer, over 100,000 possible! ° Easy operation thanks to the integrated control panel ° Quick parameterization possible thanks to the quick menu Iedpfx Aox U Dvrsg Ueal ° Original operating instructions for commissioning included ° 2 additional control cabinets with various components tailored to the inverter included (buying drive without extra components possible) The following additional components are installed (see pictures): ° 2 pcs. RFI 480/600-TN (RFI filters) ° 2 pcs. NH fuse switch disconnectors, size 3 | I = 630A ° 2 pcs. ABB AF580-30 | I = 800A (Power Contactor) ° 2 pcs. ABB AG09083735 (Circuit Breaker) ° SMF 480/1200 | 1200A (Sine Wave Motor Filter) ° 2 pcs. ABB AF750-30 | I = 1050A (Power Contactor) Only 1 unit left in stock! This item has been reset to factory settings and is therefore in its original condition as delivered by the manufacturer. Please refer to the original product images for the item's visual condition. Fully functional and ready for immediate use.

Condition: used, Year of construction: 2019, liter capacity 980 l Iasdpfex Ak Etsx Ag Usl Pressure of pump 8 / 20 bar control Schütze / Contactors weight of the machine ca. 560 kg dimensions of the machine ca. 2,3 x 2,0 x 1,8 m Coolant System MAYFRAN - BFU 980 /S/20+/8 - NEW, unused - universally applicable - can be controlled via contactors - incl. paper band filter - Number of pumps: 2 - Pump capacity: 4.0 kW, 2,917 rpm, 5.8 m³, 96.6 l/min, pressure 25 bar, max. temperature 90°C -.- kW, 2,864 rpm, 2.0 m³/h, 33.3 l/min, pressure 25 bar, max. temperature 90°C

Condition: like new (used), Year of construction: 2014, functionality: fully functional, Offer Plan: No. A8 28 441 Internal dimensions: width 1,500 mm – height 1,740 mm – length 2,500 mm Working temperature: 380 to 420°C. Maximum operating temperature: 450°C / air. TEMPERATURE HOMOGENEITY Homogeneous volume dimensions: width 1,300 mm – height 1,440 mm – length 2,200 mm Temperature homogeneity guaranteed: ±5°C within the homogeneous volume when it is at an average temperature of 420°C. Measurements taken in the empty chamber under stabilized thermal conditions. Slightly higher temperatures are expected near the walls. At floor level, the temperature will be approximately 80°C. A standard concrete floor is sufficient. FLOOR Constructed from aluminized steel sheet placed over 60 mm thermal insulation. This floor is equipped with embedded running rails (supplied by the customer). ACCESS DOOR TO THE INTERNAL VOLUME Number of doors: 1 Type: double-leaf, hinged on the right. DOOR SEAL Refractory fiber gasket. VENTILATION Horizontal air circulation. Number of units: 2. Type: centrifugal fan. Construction: mild steel. Individual air flow: 6,600 m³/h. Drive motor: brand A.B.B. or LEROY SOMER. HEATING Type: natural gas with combustion gas recirculation. Total power: 90 kW. Number of heating zones: 1 Burner type: modulating burner by WEISHAUPT, compliant with EN 746-2 standard. TEMPERATURE CONTROL Number of controlled zones: 1. Controller: EUROTHERM microprocessor-based PID controller. Safety: Torque break safety device. Relay output for contactor control. Cabinet equipment includes: Iedpfox Dhrmsx Ag Ujal - main switch - multiposition switches to prevent incorrect operation during start-up - transformer for control circuits - fuses for power and control circuits - contactors for the heating system - circuit breakers and contactors for motor control - panel switches - indicator lights - control and regulation instruments - CE marking will be affixed to the machine (subject to compliance with safety instructions) - A certificate of conformity or incorporation will be supplied by SAT.

Condition: refurbished (used), SCHLATTER Welded wire mesh production line MG24 Full revamped WORKING RANGE Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Adjustable by cutting device (0-1) Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24 WELDING MESH MACHINE MG 24.1/8C, Basic equipment including: - 1 Machine frame - 1 Upper support for press reception, continuously adjustable by hand crank - 1 Magnet supports with retaining magnets and weft wire monitoring. - 1 Row of pneumatic solenoid valves for press actuation. - 1 Installation for air and water. - 2 Pneumatic rotary drives with oil damping - Static motor torque with 5 bar compressed air: 480 Nm - Front continuously adjustable from: 25 - 250 mm adjustable by cutting device (0-1) - 1 Advance carriage with panel lifting device Iedowu Tu Dopfx Ag Ueal - 1 Set of tools for machine adjustment WELDING SECTION 8 Type C Transformers Rated power of each transformer: 100 kVA No-load secondary voltage: 7.1 V Rated secondary current: 14 kA 8 Thyristor contactors ES 130 12 Welding presses: 5.0 kN 12 Chain current bridge for spacing of warp wires: 50-100 mm 12 Chain current bridge for spacing of warp wires (for offset warp wires): 100 mm 10 Chain current bridge for spacing of warp wires: 100-150 mm 8 Chain current bridge for spacing of warp wires (for offset warp wires): 150 mm 6 Chain current bridge for spacing of warp wires: 150 - 200 mm 6 Chain current bridge for spacing of warp wires (for offset warp wires): 200 mm 24 Lower electrode holders Cu with standard angled electrodes and each with a water-cooled current cable, width: 58 mm 24 Wire clamping pliers Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24

Condition: new, Year of construction: 2024, New product, price plus VAT. 5 x uprights a 4.00m x 1.10m, PLFB 16 solid, pre-assembled 16 x trusses a 2.70m PNB 0413 32 x safety pins Results in a row of shelves with 4 bays and 2 levels + floor space = 36 pallet spaces Manufacturer: Stow Type: Pallet rack Condition: NEW Height: 4.00 m Length: approx. 11.30 m Shelf depth: 1.10 m Iasdpfoq I R Ugox Ag Uel Bracing: screwed Truss length: 2.70 m Shelf load: 3,000 kg Bay load: 6,000 kg Pallet spaces: 27 Approval: Up to earthquake zone 1 Available immediately from stock! Shipping possible with delivery address Also available in large quantities at project price! Goods in stock Frame 2000-12000mm Trusses 190cm - 270cm - 360cm Shelf load up to 4000kg Accessories such as floor fastening connectors Load warnings collision contactors Guard rails gratings Rear wall grating Depth bars Guard rails and much more... Just ask us!

Condition: good (used), Contactor, semiconductor contactor, contactor, power contactor, time relay, safety time relay, safety control, motor contactor, auxiliary contactor -Manufacturer: Schleicher, time relay -Type: KZT11 -Article No.: Quantity: 6 pieces Reiais available -Price per piece -Dimensions: 100/25/H75 mm -Weight: 0.1 kg/piece Iajdpfxjtvhtas Ag Ujl

Condition: excellent (used), Year of construction: 2017, Ferromatik Milacron Magna T(MTs) 150-450 / production line with robot Wemo 6-5 xDesign, conveyor Wemo WCS-R and contactor housing / machine in very good technical condition. Year of manufacture: 2017 Ijdpfx Aex Ng Tcsg Ueal Injection unit: Screw diameter: 45 mm injection weight: 215 g Injection pressure: 1984 bar Metering volume: 226 ccm Clamping unit : clamping force: 150 t tie bar distance: 510x510 mm size of clamping platens: 740x740 mm ejector: hydraulic clamping unit: toggle lever control: B&R - touch screen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: 11,000 in automatic mode Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Hot runner control unit x 36 (for additional payment) Injection unit is wear resistant and resistant to corrosion Main machine motor - servo motor driven by inverter Central lubrication Machine with cylinder / battery with compressed nitrogen (additional charge for fast work) Robot Wemo 6-5 xDesign Year of manufacture: 2017 4-axis robot: 3 axes are driven by servo motors (electric) The safety package for robots Robot with adapter, conveyor belt Wemo WCS-R and contactor housing Purchase of the robot and conveyor belt for an additional charge Dimensions: Weight: 7500 kg Length/width/height: 6.10x1.97x2.60 m Drive: Pumps/motor: 11,5 kW Heating power: 11,3 kW Total power: 22,8 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 73866, workpiece weight (max.): 60 kg, rotational speed (max.): 2,300 rpm, overall weight: 5,000 kg, TECHNICAL DETAILS Iedpfxoxvrzis Ag Uoal Module, max.: 7 Grinding worm diameter: 280–350 mm Grinding worm width: 84–104 mm Grinding worm speed (grinding): 1,100–2,300 rpm Grinding worm speed (profiling): 50–95 rpm Number of teeth, min.: 6 Number of teeth, max.: 600 Maximum permissible outside diameter: 360 mm Maximum workpiece weight: 60 kg Maximum grinding stroke: 175 mm Workpiece speed (grinding): max. 250 rpm MACHINE DETAILS Machine weight approx.: 5 t Electrical Data Mains connection: 3 × 400 V 50 Hz Machine voltage: 3 × 400 V 50 Hz Control voltage: 1 × 230 V 50 Hz / 1 × 24 V DC Contactor voltage: 1 × 24 V DC Solenoid valve voltage: 1 × 24 V DC

Condition: excellent (used), Year of construction: 2017, operating hours: 1,500 h, functionality: fully functional, machine/vehicle number: 17434268, type of input current: three-phase, input voltage: 400 V, electrical fuse: 63 A, input current: 61 A, input frequency: 50 Hz, pressure: 18 bar, stack height: 1,900 mm, total length: 1,600 mm, total width: 750 mm, tank capacity: 410 l, empty load weight: 315 kg, type of cooling: water, Machine Description and Technical Data 2.1 Machine Description The RED COMPACT units are delivered fully pre-assembled and require only electrical connection and hydraulic hookups on site. Main Components: Isdpsxvca Asfx Ag Usal A: Self-supporting frame with stainless steel cladding (panels 1–6 removable) B: Basin with evaporator C: Condenser unit D: Temperature controller E: Control cabinet F: Hydraulic circuit with pump (second pump optional) 2.2 Structure The compact monoblock housing contains all components necessary for operation. The external cladding is made of stainless steel; individual panels can be removed for maintenance purposes. 2.3 Basin The stainless steel basin houses the evaporator block. It is insulated with high-density polyurethane foam. A blower ensures water circulation within the basin. 2.4 Condenser Unit The condenser unit can operate with either cooling tower or well water, depending on order specification. It supplies the evaporator block and is located beneath the basin. 2.5 Temperature Controller The controller is a modern microcomputer with a high-resolution display and LED indicators for operating status. The control system is programmed to offer maximum operational safety with easy user operation. 2.6 Control Cabinet The control cabinet is dust- and splash-proof. It contains: - Main and emergency switch - Contactors, thermal relays, fuses - Safety transformer for control circuits Access is provided by removing panel 1 below the temperature controller. 2.7 Hydraulic Circuit with Pump Panel 3 is removed for connection. The following connections are provided: A – Water make-up (T1): Connection to water supply; fill level is controlled via float valve. B – Return line (T2): Return flow from the consumers. C – Overflow (T3): Connection to the process wastewater outlet. D – Chilled water outlet (P1): Supplies the consumers; open the shut-off valve before commissioning. A second pump (P2) is available as an option. E – Condenser water supply: The shell-and-tube condenser can be operated with well water or cooling tower water: Scheme A – Well Water: Use the small connections C1, C2 (inlet and outlet). The large connection remains closed. A pressure-regulated valve control can be installed as an option. Scheme B – Cooling Tower Water: Use C3 and C1/C2 in parallel to increase the flow cross-section. It is recommended to install a mechanical filter at the water inlet to prevent contamination. Manufacturer: FIC S.p.A. – Via Trivulzia 54, 23020 Mese (SO), Italy Model: RED COMPACT V.7

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 0803024, 4-SIDED PLANKER-MOULDER 5 REINFORCED MOTOR TOOL HOLDERS & 3.00 M CHROME TABLE Brand: LEADERMAC Type: SMARTMAC 523 Model: LMC-523SU Serial No.: 0803024 Year: 2008 (Photos taken before servicing & cleaning) MAKING CAPACITIES: - 4-sided planer and moulder - Max. cross-section: 130 x 230 mm - Thicknesses: 10 to 130 mm - Widths: 15 to 230 mm - Minimum length for single workpiece: 600 mm > 760 mm with use of the universal spindle - Adjustable infeeds: max. 10 mm - Spindle speed: 6000 rpm Iajdjv Tzw Espfx Ag Uel PLANKER COMPOSITION: - Robust frame Welded machine shop - Secure, soundproof, and fully panoramic enclosure on gas struts with interior lighting - Digital counters (Siko type) for precise manual adjustments of each operation - Raised control panel and operator face - Cast steel infeed table (LxW): 2980 x 255 mm Table height from ground: 900 mm - Side infeed spring-loaded pusher - Digital pass-taking indicators 1) Planer spindle 7.5 kW Tool holders Ø125 x L.230 mm 2 & 3) Right & left vertical spindle 12 kW Tool holders Ø125 x L.130 mm 4) Upper horizontal spindle with independent adjustment 11 kW Tool holders Ø125 x L.230 mm - Adjustable pressure shoe at the output 5) 360° universal spindle 11 kW Spindle Ø 50 x L. 240 mm - Vertical idler wheel presser DRIVE: - Feed with variable speed drive: 6 to 24 m/min Drive motor: 3 kW - Helical steel infeed roller in the table Cardan shaft drive - 7 pneumatic pressure rollers 2 notched steel rollers 3 (1 retractable) + 2 rubber-coated rollers - One smooth steel roller in the table at the planer outlet OTHER FEATURES: - Main power supply: 400V. Three-phase + T 50 Hz - Installed power: 53 kW (72 hp) IN 95.6 A - Automatic star-delta starting - Motors with brakes - Toothed belt drive - Electrical thickness adjustment by raising and lowering the beam. 0.37 kW motor - Shaft diameter: Ø50 mm - Minimum working air pressure: 6 bar - Suction: 5 x Ø 120 mm Recommended flow rate: 6100 m3/h Speed: 20 to 28 m/sec depending on the humidity of the wood being machined - CE marking - Padlockable contactor, mushroom stops Dimensions in operating order (W x H): 3000 x 2250 mm Dimensions: 5100 x 2000 x H 1810 mm Weight: 4300 kg Machine supplied with mounted sharpening irons, manual, spare parts list, and diagrams. Please contact us for consumables, accessories, and/or vacuum systems. Upon request, the machine will be serviced and brought into compliance, with inspection and dynamic functional testing. With a 3-month warranty and certificate of compliance. Ex-stock price excluding VAT. Delivery and additional services upon request.

Condition: new, Year of construction: 2024, New product, price plus VAT. 5 x uprights a 6.00m x 1.10m, PLFB 16 solid 24 x trusses a 2.70m PNB 0413 32 x safety pins Results in a row of shelving with 4 bays and 3 levels + floor space = 48 pallet spaces Ijdjq I R U Djpfx Ag Usal Manufacturer: Stow Type: Pallet rack Condition: NEW Height: 6.00 m Length: approx. 11.30 m Shelf depth: 1.10 m Bracing: screwed Truss length: 2.70 m Shelf load: 3,000 kg Bay load: 12,000 kg Pallet spaces: 48 Approval: Up to earthquake zone 1 Immediately available from stock! Shipping possible with delivery address Also available in large quantities at project price! Stock items Frame 2000-12000mm Trusses 190cm - 270cm - 360cm Shelf load up to 4000kg Accessories such as floor fastening connectors Load warnings collision contactors Guard rails gratings Rear wall grating Depth bars Guard rails and much more... Just ask us!

Condition: new, Year of construction: 2019, functionality: fully functional, machine/vehicle number: FA19-63709.1, pressure (max.): 5 bar, CSN instantaneous water heater type 97/DF-100 with 2-stage contactor control Instant water heater: Iajdpfevtrltox Ag Uol Voltage: 400V 3 Power: 100kW Protection class: 54 Levels: 2x25/ 1x50 kW min/ max. temp.: 0/ +90°C Filling volume: 54 liters Control: Type: 200S01004002451903 S/N: FA19-62758.1 Voltage: 400V 3/PE AC 50 Hz Power: 100kW Protection class: IP 43 The instantaneous water heater type 97/DF-100 with STS 2 is a reliable solution for the efficient heating of liquids in industrial processes. With its robust design and precise temperature control, it is ideal for applications where constant and uniform heating is required.

Condition: used, Year of construction: 2022, liter capacity 980 l Pressure of pump 8 / 80 bar control Schütze / Contactors total power requirement 16,7 kVA weight of the machine ca. 1,1 t dimensions of the machine ca. 2,40 x 2,00 x 1,96 m Coolant System BMF - BMF 980 L -4 - NEW, unused - universally applicable - can be controlled via contactors - Number of pumps: 2 - Pump output: 5.5 kW, 2,950 rpm, 1.2 m³/h, 20.0 l/min, pressure 80 bar, max. temperature 80°C 2.2 kW, 3,501 rpm, 6.9 m³/h, 115.0 l/min, pressure 25 bar, max. temperature 90°C - incl. paper belt filter Technical Data (Motor): - 1,350 rpm - 0.12 kW - incl. cooling unit (Deltatherm E4) Technical Data: - Power: 4 kW - Max. ambient temperature: 40 °C - Max. operating pressure: 28 bar - Refrigerant: R407C - Refrigerant quantity: 2.4 kg Ijdpswhzm Isfx Ag Ueal - Connected power: 2.5 kW

Condition: new, Year of construction: 2024, New product, price plus VAT. 5 x uprights a 5.00m x 1.10m, PLFB 16 solid, pre-assembled 24 x trusses a 2.70m PNB 0413 32 x safety pins Results in a row of shelves with 4 bays and 3 levels + floor space = 48 pallet spaces Manufacturer: Stow Type: Pallet rack Condition: NEW Height: 5.00 m Length: approx. 11.30 m Shelf depth: 1.10 m Bracing: screwed Truss length: 2.70 m Shelf load: 3,000 kg Bay load: 12,000 kg Pallet spaces: 48 Approval: Up to earthquake zone 1 Immediately available from stock! Shipping possible with delivery address Also available in large quantities at project price! Stock items Frame 2000-12000mm Trusses 190cm - 270cm - 360cm Shelf load up to 4000kg Accessories such as floor fastening connectors Load warnings collision contactors Guard rails gratings Rear wall grating Depth bars Guard rails and much more... Just ask us! Iedeq I R Uyopfx Ag Usal

Condition: new, Year of construction: 2024, New product, price plus VAT. 5 x uprights a 3.00m x 1.10m, PLFB 16 solid, pre-assembled 16 x trusses a 2.70m PNB 0413 32 x safety pins Results in a row of shelving with 4 bays and 2 levels + floor space = 27 pallet spaces Manufacturer: Stow Type: Pallet rack Condition: NEW Height: 3.00 m Length: approx. 11.30 m Shelf depth: 1.10 m Bracing: screwed Truss length: 2.70 m Shelf load: 3,000 kg Bay load: 6,000 kg Pallet spaces: 27 Approval: Up to earthquake zone 1 Available immediately from stock! Shipping possible with delivery address Also available in large quantities at project price! Goods in stock Frame 2000-12000mm Trusses 190cm - 270cm - 360cm Shelf load up to 4000kg Accessories such as floor fastening connectors Load warnings collision contactors Guard rails Isdpfx Agjq I R T Re Ujal gratings Rear wall grating Depth bars Guard rails and much more... Just ask us!

Year of construction: 2013, condition: excellent (used), Price plus VAT. The product is also available in other quantities and designs. Included in this package: 7 x stands a 700cm x 110cm (gray) 36 x crossbars a 3600mm (gray) 96 x safety pins Results in one row of shelving with 6 bays, each with 3 levels of floor space = a total of 96 pallet spaces (400kg per pallet) Isdpok Eb Sfofx Ag Ueal Manufacturer: Jungheinrich Type: B Condition: used, very good condition Height: 700 cm Length: approx. 1 x 22.20 Shelf depth: 110 cm Bracing: screwed Truss length: 3.60 m Shelf load: 1600 kg Bay load: 4981 kg Pallet spaces: 96 Accessories such as Floor fastening connectors Load warnings collision contactors Guard rails gratings Rear wall grating Depth bars Guard rails and much more... Just ask us!

Condition: good (used), Included in this package: Iedpfsrhkvnjx Ag Ujal 11 x stands a 700cm x 110cm (gray) 60 x crossbars a 3600mm (gray) 120 x safety pins Results in a rack row with 10 bays each with 3 levels of floor space = a total of 160 pallet spaces (800kg per pallet) Manufacturer: Bito Type: P4 Condition: used, good condition Height: 700 cm Length: approx. 1 x 37.10m Shelf depth: 110 cm Bracing: screwed Truss length: 3.60 m Shelf load: 3200 kg Bay load: 9600 kg Pallet spaces: 96 Accessories such as Floor fastening connectors Load warnings collision contactors Guard rails gratings Rear wall grating Depth bars Guard rails and much more... Just ask us!