Used Limb Protection for sale (12,953)

Condition: used, machine/vehicle number: H2X386V04722, Year of construction: 2019, operating hours: 25,272 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,800 kg Lifting height: 6,075 mm Fork carriage adjustment range: 350–1,050 mm Fork length: 1,200 mm MACHINE DETAILS Mast type: Triplex mast with full free lift Drive type: Electric Battery type: 5 PzS Battery year of manufacture: 2023 Battery voltage: 48 V Battery capacity: 625 Ah Rest voltage: 51.3 V Dimensions and weight Dimensions (L × W × H): 3,200 × 1,150 × 2,761 mm Own weight: 3,800 kg Operating hours: 25,272 h Service valid until: 07/2027 UVV (Occupational Safety) valid until: 07/2027 EQUIPMENT 3rd and 4th valve Formerly a Linde full-service machine Ndjdpfx Abjz S Nq Soyec Facelift model with tilt angle indicator Fork carriage with side shift Lateral fall-through protection, easily removable White, non-marking tires LED work light at the front LED work light at the rear Road traffic lighting with turn signals Safety light at the front Safety light at the rear Comfort seat with lumbar support Seat heating All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons with a large forklift on-site is possible. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 157

Condition: excellent (used), Year of construction: 2021, operating hours: 4,689 h, functionality: fully functional, machine/vehicle number: 103, overall weight: 32,000 kg, power: 390 kW (530.25 HP), conveyor belt speed: 2,000 mm/s, fuel tank capacity: 950 l, The machine is equipped with a new roller! The following work was carried out on the machine: Machine washed and cleaned Roller disassembled and bearing shield separated from the roller Rack, limiter, and comb attachments disassembled Cooling and air intake system, front door, and soundproofing register disassembled and reassembled Roofs disassembled and reassembled Various brackets repaired and re-welded Oil pan replaced Exhaust system completed Openings in the housing retrofitted with labyrinth sealing New tools mounted on the drum and rack Roller mounted Cable harnesses repaired TECHNICAL DETAILS Type: Size L-C3 VARIOMAT Roller teeth: 42 pieces Limiter: Size L, 20 pieces Roller: New Loading height: 3,307 mm Loading protection: On both sides Longitudinal belt length: 4,450 mm Longitudinal belt width: 1,000 mm Rear belt length: 8,500 mm Rear belt width: 1,200 mm Discharge height: 5,050 mm Conveyor speed: 2 m/s MACHINE DETAILS Engine type: Diesel-hydraulic Engine: MTU 6R1300 Rated power: 390 kW Engine speed: 1,700 rpm Emission standard: EU Stage V Fuel tank: 950 l Additional hydraulic connection: 30 l/min Additional hydraulic connection: 70 l/min Roller drive: 380 kW Drive system: VARIO Hydraulic system: Load-Sensing system Operating hours: 4,689 h Ndodpfx Asz Rqcmjbyoc Chassis: 3-axle semi-trailer chassis unit Drive: Hydraulic Dimensions & Weight Dimensions in working position (L x W x H): 16,786 x 2,500 x 5,050 mm Dimensions in transport (L x W x H): 9,971 x 2,500 x 3,893 mm Total weight: 32,000 kg Operating hours: 4,689 h EQUIPMENT Basic package Inventhor Type 9 Additional hydraulic connection 30 l/min and 70 l/min Roller drive via planetary gear 380 kW Load-Sensing system Radio remote control, complete Large side GRP maintenance doors easy-to-maintain engine compartment with LED light hydraulically reversible fan wheel loading protection on both sides Fire extinguisher Maintenance ladder Toolbox acoustic start-up warning Doppstadt telematics system 3-axle semi-trailer chassis unit Shredding system Size "L-C3"-VARIOMAT Size "L" - "Limiter" (20 pieces) hydraulic drive Watering on both sides Rear belt 8.5 m, 1,200 mm wide Overbelt magnet neodymium Frame for overbelt magnet neodymium Central lubrication with pump LED lighting package engine compartment and rear Note: The Doppbasket system can be retrofitted for an additional cost.

Year of construction: 2019, condition: excellent (used), 2019 Mobile Ugab Protective/Testing Interlocked Chamber Ndjdpfxo Ad Ab Hs Abyec Approx Dimensions W1,890 x D850 x H2,040mm.

Condition: ready for operation (used), functionality: fully functional, operating hours: 10,386 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS GENERAL Manufacturer: Still Type: RX20-18 Year of manufacture: 2019 Drive type: Electric Operating hours: 10,386 h Load capacity: 1,800 kg LIFTING EQUIPMENT Mast type: Triplex mast Lifting height: 4,500 mm Full free lift: available FORKS AND HYDRAULICS Fork length: 1,000 mm Hydraulic valves: 3rd + 4th valve Fork positioner: hydraulic Side shifter: available BATTERY Battery year of manufacture: Battery voltage: 48 V Battery capacity: 898 Ah Battery idle voltage: 54.6 V MACHINE DETAILS DIMENSIONS AND WEIGHT Overall length: 3,000 mm Overall width: 1,150 mm Overall height: 2,060 mm Dead weight: 3,400 kg EQUIPMENT Battery charger Semi-cabin Lateral fall protection LED work light (rear) Orange warning light Comfort seat with lumbar support Seat heating Lot number: 229 Collection conditions: Lateral loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Loading from the rear via ramp is possible for truck heights of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. Njdo Ad N D Uepfx Abyjdc If collection is not carried out within the specified time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection.

Condition: used, machine/vehicle number: H2X386V04476, Year of construction: 2019, operating hours: 24,655 h, load capacity: 1,800 kg, lifting height: 6,075 mm, mast type: triplex, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,800 kg Lifting height: 6,075 mm Fork length: 1,200 mm Fork spreader: 350–1,000 mm MACHINE DETAILS Mast: Triplex mast with full free lift Drive type: Electric Battery: 48 V, 625 Ah Battery voltage at rest: 50.8 V Dimensions & Weight Dimensions (L x W x H): 3,200 x 1,150 x 2,671 mm Own weight: 3,800 kg Service valid until: UVV 07/2027 UVV inspection valid until: UVV 07/2027 Operating hours: 24,655 h EQUIPMENT Former Linde full-service unit Facelift model Tilt angle indicator Nsdpfx Absz Nv Ewjyodc Side fall protection White, non-marking tires LED work light, front LED work light, rear Road traffic lighting with turn signals Safety Light, front Safety Light, rear Comfort seat with lumbar support and seat heating Hydraulics: 3rd and 4th valve Side shifter All dimensions are rounded values. No guarantee is given for typographical and measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If the machine is not collected on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 131

Condition: used, machine/vehicle number: H2X386V04688, Year of construction: 2019, operating hours: 21,389 h, load capacity: 1,800 kg, lifting height: 6,075 mm, mast type: triplex, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,800 kg Lifting height: 6,075 mm Fork length: 1,200 mm Fork adjustment range: 350–1,050 mm MACHINE DETAILS Mast type: Triplex mast with full free lift Battery: 48 V, 625 Ah, 5 PzS Battery year of manufacture: 23.06.2023 Battery voltage at rest: 51.1 V Dimensions & Weight Dimensions (L x W x H): 3,200 x 1,150 x 2,671 mm Own weight: 3,800 kg Service valid until: 07/2027 UVV (occupational safety) valid until: 07/2027 Operating hours: 21,389 h EQUIPMENT Former Linde full-service unit Fork positioner with side shifter Lateral fall protection, easily removable White, non-marking tires LED work light, front LED work light, rear Road traffic lighting with turn signals Safety light, front Safety light, rear Ndsdpez Nwknjfx Abyec Comfort seat with lumbar support and seat heating Facelift model with tilt angle indicator Hydraulics: 3rd and 4th valve All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification from Monday to Friday between 07:00 and 16:00. If collection is not made on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 164

Condition: used, machine/vehicle number: H2X386V04486, Year of construction: 2019, operating hours: 22,973 h, load capacity: 1,800 kg, lifting height: 6,075 mm, mast type: triplex, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,800 kg Lifting height: 6,075 mm Fork length: 1,200 mm Fork adjustment: 350–1,050 mm MACHINE DETAILS Mast: Triplex mast with full free lift Drive type: Electric Battery: 48 V, 625 Ah Battery year of manufacture: 2023 Nodpfoz Nwpwox Abyedc Battery voltage in idle state: 50.3 V Dimensions & Weight Dimensions (L x W x H): 3,200 x 1,150 x 2,671 mm Own weight: 3,800 kg Service valid until: 07/2027 UVV (Occupational Safety) valid until: 07/2027 Operating hours: 22,973 h EQUIPMENT Former Linde full-service unit Facelift model with tilt angle indicator Lateral fall protection, easily removable White, non-marking tires LED work light, front LED work light, rear Road traffic lighting with turn signals Safety light, front Safety light, rear Comfort seat with lumbar support Seat heating Hydraulics: 3rd and 4th valve Side shifter All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 tons possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification from Monday to Friday between 07:00 and 16:00. In case of non-compliance with the collection deadline, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 165

Condition: used, machine/vehicle number: H2X386E56873, Year of construction: 2014, operating hours: 12,081 h, load capacity: 2,000 kg, lifting height: 4,625 mm, mast type: triplex, fork length: 1,150 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 4,625 mm Load capacity: 2,000 kg Fork length: 1,150 mm MACHINE DETAILS Mast type: Triplex mast Drive type: Electric Battery year of manufacture: 2021 Battery voltage: 48 V Battery type: 5 PzS Battery capacity: 775 Ah Measured rest voltage: 50.3 V Dimensions & Weight Dimensions (L x W x H): 3,200 x 1,150 x 2,121 mm Ndsdpfxoz Nygxe Abyjc Own weight: 3,800 kg Service valid until: 04/2027 UVV (occupational safety) valid until: 04/2027 Operating hours: 12,081 h EQUIPMENT Triplex mast with full free lift Side shifter 3rd hydraulic valve Lateral fall protection, removable LED work light, front Orange warning light Safety light, rear Comfort seat Previously a Linde full-service unit All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift truck on site. Loading is at your own risk. Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. A storage fee of €20 per machine and day will be charged for late collection. Outstanding storage fees must be paid in full before collection. Lot number: 211

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, power: 3.2 kW (4.35 HP), input voltage: 380 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, stroke length: 100 mm, table width: 450 mm, table length: 600 mm, throat depth: 200 mm, ram plate width: 400 mm, ram plate length: 260 mm, clearance between the columns: 260 mm, overall weight: 2,600 kg, Equipment: CE marking, safety light barrier, 2001 Presse Ross 40V-4 40 ton mechanical press with Brankamp Prokos PK550/3 monitoring, Soprem powered decoiler and safety guarding. Manufacturer: Presse Ross Model: 40V-4 Machine Type: Mechanical Press Year: 2001 Condition: Very Good Includes: Brankamp Prokos PK550/3 Process Monitoring Control Soprem RMI 50 F1 Powered Auto/Manual Decoiler Interlocked safety guards Separate control panel with two hand control Machine Description Used 2001 Presse Ross Type 40V-4 40 tonne mechanical eccentric power press, complete with Brankamp Prokos PK550/3 process monitoring control, Soprem RMI 50 F1 powered automatic/manual decoiler, interlocked perimeter safety guarding and separate control panel with two-hand operation. This Italian-built Presse Ross 40V-4 mechanical stamping press has a nominal pressing capacity of 400 kN / 40 tonnes, an adjustable 7–100 mm ram stroke and variable operating speed of approximately 68–203 strokes per minute. The included Brankamp Prokos PK550/3 process monitoring system is designed for monitoring press-production parameters and identifying abnormal process conditions. Brankamp/Prokos systems of this type monitor manufacturing process signals such as pressing/forming forces and can be used to identify deviations during production. Technical Specification Manufacturer: Presse Ross Model / Type: 40V-4 Year: 2001 Serial Number: 02-0297 Press Type: Mechanical eccentric / flywheel press Nominal Press Force: 400 kN / approx. 40 tonnes Ram / Slide Guides: 4 Adjustable Stroke: 7–100 mm Ram / Slide Adjustment: 60 mm Maximum Shut / Closed Die Height: 275 mm Variable Stroke Rate: Approx. 68–203 strokes/min Nominal Speed: 150 strokes/min Throat Depth: Approx. 200 mm Frame Opening / Passage: Approx. 260 mm Table Size: 600 × 450 mm Table Thickness: Approx. 55 mm Table Opening: Approx. 120 mm Ram / Slide Surface: 400 × 260 mm Tool Shank / Ram Bore: 50 mm Motor Power: 3.2 kW Motor Speed: 2,000 rpm Electrical Supply: 380 V / 50 Hz Maximum Flywheel Speed: Approx. 203 rpm Compressed Air Supply: Approx. 0.5–0.7 MPa Machine Weight: Approx. 2,600 kg Included Equipment Brankamp Prokos PK550/3 Process Monitoring Control Nodpfsz Irbqsx Abyedc Process monitoring equipment for monitoring press operation and production parameters, useful for detecting process deviations and helping protect tooling and production quality. Soprem RMI 50 F1 Powered Decoiler – 1992 Powered coil decoiler with automatic/manual operation, suitable for supplying strip material to the press for coil-fed production. Safety Equipment Interlocked safety guarding Separate operator control panel Two-hand press control Guard interlocking Emergency-stop controls Machine Highlights 40 tonne / 400 kN capacity Variable-speed mechanical press 7–100 mm adjustable stroke Up to approximately 203 strokes/min 600 × 450 mm bolster/table Brankamp Prokos PK550/3 process monitoring Soprem powered automatic/manual decoiler included Interlocked safety guarding Separate two-hand control station Italian-manufactured Presse Ross press Condition Used machine. Please contact us for further information, photographs, availability, inspection arrangements and pricing. Please Note: All specifications, dimensions, capacities and descriptions are approximate and provided in good faith. Prospective purchasers should independently verify all important specifications and machine suitability before purchase.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, power: 3.2 kW (4.35 HP), input voltage: 380 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, stroke length: 100 mm, table width: 450 mm, table length: 600 mm, throat depth: 200 mm, ram plate width: 400 mm, ram plate length: 260 mm, clearance between the columns: 260 mm, overall weight: 2,600 kg, Equipment: CE marking, safety light barrier, 2000 Presse Ross 40V-4 40 ton mechanical press with Brankamp Prokos PK550/3 monitoring, OBRU powered decoiler and safety guarding. Manufacturer: Presse Ross Model: 40V-4 Machine Type: Mechanical Press Year: 2000 Condition: Very Good Includes: Brankamp Prokos PK550/3 Process Monitoring Control OBRU Powered Decoiler Interlocked safety guards Separate control panel with two hand control Machine Description Used 2001 Presse Ross Type 40V-4 40 tonne mechanical eccentric power press, complete with Brankamp Prokos PK550/3 process monitoring control, OBRU powered decoiler, interlocked perimeter safety guarding and separate control panel with two-hand operation. This Italian-built Presse Ross 40V-4 mechanical stamping press has a nominal pressing capacity of 400 kN / 40 tonnes, an adjustable 7–100 mm ram stroke and variable operating speed of approximately 68–203 strokes per minute. The included Brankamp Prokos PK550/3 process monitoring system is designed for monitoring press-production parameters and identifying abnormal process conditions. Brankamp/Prokos systems of this type monitor manufacturing process signals such as pressing/forming forces and can be used to identify deviations during production. Technical Specification Manufacturer: Presse Ross Model / Type: 40V-4 Year: 2001 Serial Number: 02-0297 Press Type: Mechanical eccentric / flywheel press Nominal Press Force: 400 kN / approx. 40 tonnes Ram / Slide Guides: 4 Adjustable Stroke: 7–100 mm Ram / Slide Adjustment: 60 mm Maximum Shut / Closed Die Height: 275 mm Variable Stroke Rate: Approx. 68–203 strokes/min Nominal Speed: 150 strokes/min Throat Depth: Approx. 200 mm Frame Opening / Passage: Approx. 260 mm Table Size: 600 × 450 mm Table Thickness: Approx. 55 mm Table Opening: Approx. 120 mm Ram / Slide Surface: 400 × 260 mm Tool Shank / Ram Bore: 50 mm Motor Power: 3.2 kW Motor Speed: 2,000 rpm Electrical Supply: 380 V / 50 Hz Maximum Flywheel Speed: Approx. 203 rpm Compressed Air Supply: Approx. 0.5–0.7 MPa Machine Weight: Approx. 2,600 kg Included Equipment Brankamp Prokos PK550/3 Process Monitoring Control Process monitoring equipment for monitoring press operation and production parameters, useful for detecting process deviations and helping protect tooling and production quality. OBRU SAH 1M Powered Decoiler The machine is supplied with an OBRU SAH 1M powered / motorised decoiler, suitable for unwinding coil strip for feeding into the press. Safety Equipment Interlocked safety guarding Separate operator control panel Two-hand press control Guard interlocking Emergency-stop controls Machine Highlights 40 tonne / 400 kN capacity Variable-speed mechanical press 7–100 mm adjustable stroke Up to approximately 203 strokes/min 600 × 450 mm bolster/table Brankamp Prokos PK550/3 process monitoring OBRU powered decoiler included Interlocked safety guarding Separate two-hand control station Italian-manufactured Presse Ross press Condition Used machine. Please contact us for further information, photographs, availability, inspection arrangements and pricing. Ndsdpfx Asz It Dmjbyec Please Note: All specifications, dimensions, capacities and descriptions are approximate and provided in good faith. Prospective purchasers should independently verify all important specifications and machine suitability before purchase.

Condition: ready for operation (used), functionality: fully functional, operating hours: 10,778 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Mast Mast type: Duplex mast with full free lift Lifting height: 3,760 mm Load capacity: 3,000 kg Fork length: 1,200 mm Hydraulics: 3rd valve Side shifter: included Drive and Battery Drive type: Electric Battery voltage: 80 V Battery capacity: 775 Ah Battery date of manufacture: Week 48/2022 Battery voltage at rest: 84.5 V MACHINE DETAILS General Manufacturer: Linde Type: E30HL Year of manufacture: 2018 Operating hours: 10,778 h Dead weight: 5,800 kg Dimensions Overall length: 3,700 mm Overall width: 1,200 mm Overall height: 2,500 mm Inspections and Service Service valid until: UVV (German accident prevention regulations) valid until: EQUIPMENT Duplex mast with full free lift Side shifter Semi-cabin with windshield wiper Roof panel Lateral fall protection, removable LED work light, front LED work light, rear Safety light, front Safety light, rear Comfort seat Facelift model with tilt angle indicator All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Ndodjz R D Agjpfx Abysc Side loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible for trucks with a height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 193

Condition: used, machine/vehicle number: H2X386D07660, Year of construction: 2013, operating hours: 16,214 h, load capacity: 2,000 kg, lifting height: 3,400 mm, mast type: duplex, fork length: 1,600 mm, empty load weight: 3,500 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 3,400 mm Load capacity: 2,000 kg Fork length: 1,600 mm MACHINE DETAILS Mast design: Duplex mast with full free lift Drive type: Electric Ndjdpoz Nvtnofx Abysc Battery year of manufacture: 2021 Battery voltage: 48 V Battery capacity: 750 Ah resting voltage Battery: 50.1 V Dimensions & Weight Dimensions (L x W x H): 3,700 x 1,150 x 2,250 mm Own weight: 3,500 kg Service valid until: 07/2027 UVV (Occupational Safety) certificate valid until: 07/2027 Operating hours: 16,214 h EQUIPMENT Formerly a Linde full-service unit Duplex mast with full free lift Fork positioner with side shifter Windshield with windshield wiper Roof panel Lateral fall protection, easily removable LED work light at the front LED work light at the rear Road traffic lighting with turn signals Safety light at the rear Comfort seat with lumbar support and seat heating Free lift Hydraulically adjustable forks 3rd and 4th valve All dimensions are rounded values. No guarantee is given for typing or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible with a large forklift truck on site. Loading is carried out at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by e-mail. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 120

Condition: used, machine/vehicle number: FN597668, Year of construction: 2019, operating hours: 6,532 h, load capacity: 3,000 kg, lifting height: 4,000 mm, fork length: 1,200 mm, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 4,000 mm Fork length: 1,200 mm Fork spreader: 550–1,720 mm MACHINE DETAILS Mast: Free-lift mast without a central hydraulic cylinder Machine type: Electric forklift Ndedoz S Nqfjpfx Abysc Year of battery manufacture: 2017 Battery voltage: 80 V Battery capacity: 775 Ah Rest voltage: 84.1 V Dimensions & Weight Dimensions: 3,900 × 1,250 × 2,620 mm Own weight: 5,200 kg Service valid until: 07/2027 UVV certification valid until: 07/2027 Operating hours: 6,532 h EQUIPMENT Former Jungheinrich full-service unit 3rd and 4th valve Free-lift mast Fork spreader with side shifter Full cabin Heater Windshield wiper LED work light (front) Comfort seat All dimensions are approximate values. No warranty is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift truck available on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out within the specified time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 140

Year of construction: 2007, condition: like new (used), functionality: fully functional, Special Opportunity! Only ONE unit left! We are able to offer you this top-quality Thermo / Heraeus B 6200 incubator, in mint condition, from the inventory of the State of Thuringia. The B 6200 is one of the most reliable units on the market and has become indispensable in laboratories worldwide. Known for its high precision, it is also regarded among professionals as especially robust and durable. This device was purchased new by the State of Thuringia in 2007 and has since only been operated annually for calibration purposes. Its condition is immaculate both visually and technically – see photos. A particular highlight is the enhanced specification, far surpassing the standard model: this B 6200 features additional safety switches, a timer, and microprocessor-controlled temperature regulation. The price refers to one incubator with the described equipment and an internal shelf as shown. Technical Data: Thermo / Heraeus B 6200 incubator Nsdpfx Aswcznbebyedc Manufacturer: Thermo / Heraeus, Made in Germany Internal volume: 196 liters. Temperature range up to 70°C. Fresh air and exhaust ports. External dimensions (W x H x D): 895 x 816 x 715 mm Internal dimensions (W x H x D): 554 x 644 x 550 mm Weight: approx. 90 kg 230 V, 50 Hz, 2.6 A, 0.6 kW Features: Digital temperature controller with microprocessor monitoring, over- and under-temperature protection. Timer. Stainless steel inserts. Applications: Microbiological incubation in pharmaceutical, medical, and microbiological laboratories; hygiene testing in pharmaceutical, food, and cosmetics industries; long-term storage tests; and more. This offer is directed exclusively at commercial customers. An invoice with VAT shown will be provided. Private buyers may purchase the unit "on behalf of a customer." Direct commercial sale to private individuals is expressly ruled out. The goods are sold under exclusion of any warranty or liability for material defects. This exclusion does not apply to damage claims due to gross negligence or intentional misconduct by the seller, or any injury to life, limb, or health. Shipping will be arranged within three working days of payment receipt via freight carrier. Alternatively, you may collect the device from our premises by appointment during business hours. Total shipping weight including accessories and pallet is approx. 110 kg. If you have any questions, please contact us directly using the details provided.

Condition: used, machine/vehicle number: H2X351N03744/30, Year of construction: 2002, operating hours: 15,752 h, load capacity: 3,000 kg, lifting height: 5,900 mm, mast type: triplex, fork length: 1,150 mm, No minimum price – guaranteed sale to the highest bidder! The engine was overhauled in 2024! TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 5,900 mm Fork length: 1,150 mm MACHINE DETAILS Mast type: Triplex mast with full free lift Dimensions & Weight Dimensions (L x W x H): 3,900 x 1,300 x 2,650 mm Own weight: 5,100 kg UVV valid until: 10/2026 Nsdpjz Nvqmjfx Abyodc Drive type: LPG Engine manufacturer: Perkins Engine overhaul: 2024 Operating hours: 15,752 h EQUIPMENT Former Linde full-service unit Load protection grille Full cabin Heater White, non-marking tires Windshield wiper LED work light (front) LED work light (rear) Comfort seat with lumbar support LPG gas cylinder with changeover valve Full free lift Hydraulic fork positioner Side shifter 3rd and 4th valve All dimensions are approximate. No guarantee is given for typing or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Loading from the rear via ramp is possible for a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not made within the deadline, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 113

Condition: used, machine/vehicle number: 516305X00392, Year of construction: 2020, operating hours: 9,411 h, load capacity: 3,000 kg, lifting height: 4,150 mm, mast type: duplex, fork length: 2,400 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 4,150 mm Fork length: 2,400 mm MACHINE DETAILS Mast type: Duplex mast Free-lift mast: Without center hydraulic cylinder Drive type: Electric Battery voltage: 80 V Battery capacity: 620 Ah Battery voltage in idle state: 87.5 V Dimensions & Weight Dimensions (L x W x H): 4,900 x 1,200 x 2,750 mm Njdpfx Aoz Nv A Asbyjdc Dead weight: 5,100 kg Service valid until: 04/2027 UVV certificate valid until: 04/2027 Operating hours: 9,411 h EQUIPMENT Fork positioner with side shifter Semi-cab with windshield wiper Lateral fall protection, detachable LED work light, front LED work light, rear Orange warning light Safety light, rear Comfort seat with lumbar support Previously a Still full-service unit 3rd and 4th valve Fork adjustment: Hydraulically adjustable Side shifter All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 t is possible with a large forklift on site. Loading is carried out at your own risk. Rear loading via ramp is possible for a truck height of 100–150 cm, up to 15 t and up to a width of 230 cm. Collection is only possible after receiving confirmation of payment by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 122

Condition: excellent (used), Year of construction: 2010, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General Information Manufacturer: TRUMPF Model: TruLaser 5030 fiber (L41) Machine Type: Laser cutting machine Year of Manufacture: 2010 Available: End of October 2026 Weight: 12,000 kg Working Area Working area X/Y/Z: 3,000 × 1,500 × 115 mm Speed: max. 300 m/min Accuracy: 0.05 mm Laser Laser: TruDisk 3001 solid-state laser Laser power: 3 kW Laser operating time: approx. 35,000 h Cutting Capacities Sheet thickness steel: max. 20 mm Sheet thickness stainless steel: max. 15 mm Sheet thickness aluminum: max. 15 mm Control and Operation Control system: Siemens SINUMERIK 840D SL Touch color screen: 17 inches Machine Dimensions Length: 9,950 mm Width: 4,600 mm Height: 2,400 mm Costs IT costs: 3,000 EUR EQUIPMENT Enclosed machine frame with integrated laser unit Nodez S Egispfx Abysdc Motion unit for highly precise machining Torque drive in combination with linear direct drives Enclosed, fiber-guided beam entry Machine cooling unit, water-air Integrated control cabinets with internal lighting Common main switch for machine and laser Automatic pallet changer in the longitudinal direction Longitudinal conveyor belt Power supply for the TruDisk via the machine Work area lighting Position laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Laser cooling unit, water-air Excitation via pump diodes with long service life Laser power control Laser logbook function Universal cutting unit with fully adaptive lens system Single-cut head strategy Protective glass against lens contamination ControlLine height control and sheet outer edge detection Workshop programming Fast reproduction Integrated technology data Automatic shutdown Programmable cutting gas and pressure selection FastLine FlyLine Remote service via the internet Diagnostic functions Integrated e-shop USB interface RJ-45 network connection CE marking Light barriers Multi-chamber extraction system Integrated compact dust extraction system Machine cladding with certified viewing window Door on the right Electric roll-up roof

Year of construction: 2021, condition: new, Special opportunity - ideal for fire departments, occupational safety, and military operations! Bulk pricing: 1 box of 80 pieces at EUR 13.50/piece = EUR 1,080.00 net 10 boxes of 80 pieces at EUR 12.50/piece = EUR 10,000.00 net 25 boxes of 80 pieces at EUR 11.70/piece = EUR 23,400.00 net 75 boxes of 80 pieces at EUR 10.80/piece = EUR 64,800.00 net 125 boxes of 80 pieces at EUR 10.00/piece = EUR 100,000.00 net From federal stocks, we can offer you these first-class flame-retardant hoods from the global brand "COMAZO" at a particularly attractive price! The masks are used by German fire departments, the German Navy, and the Army, among others. In contrast to most – significantly cheaper – masks on the market, COMAZO masks are manufactured in Germany to the highest standards, are particularly durable, and, thanks to their sophisticated 3-layer construction, meet all modern requirements regarding comfort and fire protection. The 3-layer construction consists of: 48.5% Aramid / Kermel 48.5% Viscose / Lenzing 3% Carbon Fiber / Belltron Weight approx. 150 grams per piece, color: navy. They meet the requirements of EN 13911:2017 and are washable at 60 degrees Celsius. They are a perfect fit in one size, easily adapting to almost any head shape. The masks were produced in November 2021, are unused, and individually sealed for hygienic reasons – see pictures. Current manufacturer's asking price: approximately €50. The sale is subject to advance payment. You will, of course, receive an invoice with VAT shown. The goods are sold without any warranty or liability for material defects. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of the seller's obligations, nor to any injury to life, limb, or health. Ndedpfx Abotvgurjyjc Please feel free to contact us at the address provided for any inquiries regarding prices or technical details.

Condition: ready for operation (used), Year of construction: 2023, controller manufacturer: TRUMPF, controller model: Touchpoint TruBend, overall weight: 30,000 kg, total width: 5,150 mm, total height: 2,995 mm, product length (max.): 6,500 mm, Folding machine manufactured in 2023. This TRUMPF TruBend Center 7030 (B34) features a maximum bending edge length of 3,123 mm and a holder clamping force of 101 t. It includes a 2-axis part manipulator with a travel of 2,653 mm and an automatic loading/unloading system. If you are looking to get high-quality bending capabilities, consider the TRUMPF TruBend Center 7030 (B34) machine we have for sale. Contact us for further details. • Construction: Welded steel frame; Bending system: Wedge drive; Crowning: Included, adjustable via control • Capacities • Max bending edge length: 3,123 mm • Min bending edge length: 200 mm • Min bending width with standard holder: 145 mm • Min bending width with ENW tools: 40 mm • Max box height: 220 mm • Holder clamping force: 101 t • Material thickness: min 0.4 mm; max structural steel 3.0 mm; max stainless 2.2 mm; max aluminum 4.0 mm • Manipulation and positioning (integrated) • 2-axis part manipulator with 12 suction modules; X travel 2,653 mm; stroke 100 mm • 5-axis rear stop; Rotary manipulator; Front stop; Loading pincers • Automatic part positioning and rotation • Speeds • Y-axis rapid traverse: 250 mm/s • Front stop: 3,000 mm/s • Part manipulator: 3,000 mm/s • Rotary manipulator: up to 3 rev/s • ToolMaster Bend: 2,400 mm/s • Positioning accuracy • Y: 0.10 mm; X: 0.05 mm; R: 0.05 mm • CNC control • 21.5" touchscreen; Windows 7 Ultimate 64-bit; keyboard and mouse • USB; RJ45; Ethernet 10/100 Mbit/s; Internet teleservice/remote diagnostics • Programming software • TecZone Fold floating license • Automatic programming from 2D/3D, automatic bending program generation • 3D bending simulation; collision checking; manual program modification • ToolMaster Bend (automatic tool handling) • Automatic hold-down tool positioning and setup per program • Automatic positioning of standard, Pick&Place, and curved holders • Included tooling • 16 standard hold-down tools (160 mm each) • 6 Pick&Place hold-down tools; segments 10/15/20/40 mm • Corner hold-down tool, length 199 mm Ndsdpfxo Afpmlj Abyec • OBW90 and UBW90 bending tools • ENW equipment • ENW function for tilting hold-down tools • ENW110-40 tool, length 3,123 mm, depth 40 mm • Min bending width with ENW: 40 mm • Bend angle measurement • Optical bend-angle assistance with integrated camera • Graphical comparison of programmed vs. actual angle • Minimum part-side length for angle measurement: 10 mm • Safety • CE certification; rotating safety doors; safety light barriers • Working-area access protection; foot switch with enable; emergency stop • Electrical power supply: 80 kVA Additional equipment • Automatic loading/unloading system with storage interface • Automatic blank separation and feeding; transfer to bending center • Automatic finished-part unloading with belt conveyor • Max blank size: 3,048 x 1,500 mm • Storage interface included • Loading trolley: not included • Rail set: not included • Additional part handling modules • 12 three-surface vacuum modules (upper/lower/front suction) • 6 magnetic modules and 4 two-surface magnetic modules • Vacuum and magnetic modules can be used together • Identification and connectivity accessories • Wireless 2D code reader with Bluetooth • Barcode and DataMatrix code reading • Automatic production program loading

Condition: used, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 750 °C, inner dimension length: 1,000 mm, inner dimension width: 600 mm, inner dimension height: 600 mm, total length: 1,670 mm, total width: 1,700 mm, total height: 1,800 mm, overall weight: 800 kg, number of chambers: 1, Equipment: CE marking, Protective gas annealing furnace, Vötsch type VAW 60/100 • Rated temperature: 750 °C Nsdpsz Azaujfx Abyedc • Power: 22 kW • Connected load: 24 kVA • Usable dimensions: 600 x 600 x 1000 mm (width x height x depth) Can be inspected while energized.

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Output voltage: 48 V Charging current: 50 A Suitable battery capacity: 300–500 Ah Maximum battery capacity: 800 Ah (?) Protection class: IP66 Mains connection: 220 V Connector type, battery side: Rema, 160 A Impact protection: available MACHINE DETAILS Year of manufacture: 2026 Overall length: 300 mm Overall width: 200 mm Overall height: 200 mm Weight: 10 kg EQUIPMENT 220 V mains plug Rema connector, 160 A All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Nsdpfxsz R Sf Rs Abyedc * Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. * Rear loading via ramp is possible for truck heights of 100–150 cm, up to 15 tons, and up to a width of 230 cm. * Collection is only possible after receipt of payment confirmation by email. * Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. * If collection is not carried out within the specified timeframe, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 4850

Condition: used, functionality: fully functional, Year of construction: 2006, operating hours: 2,500 h, This is a Wet Cast concrete paving slab machine manufactured by Coote Engineering. Ndodpsz D T Tgjfx Abyec This wet cast paving machine is a complete automated production system designed for the efficient manufacture of wet cast paving slabs and concrete products. The system includes automatic operation throughout the main production process with: Automatic demoulding, auto tip out to eliminate dirt in carrier before filling, auto oiling, automatic weigh dosing system which can be changed by use of the HMI while still producing, auto ball placing by use of a Fanuc robot which protects the face of the product, automatic product stacking to any size of pallet. The machine can comfortably produce approximately 125mtrs per hour. This is a substantial piece of equipment suitable for a manufacture or a business looking to expand their range. The machine is also capable of manufacturing stepping stones, edgings and cladding plus many more different shapes. Because of the technology and automation the machine reduces production and labour costs with its efficiency and needing only 2 personnel to operate.

Condition: like new (used), functionality: fully functional, Newly arrived! We can offer you this top incubator / heating cabinet type B 5028 of the world brand "Heraeus" from federal stocks. The B 5028 is characterized by its particularly precise temperature control and minimal energy requirements and, due to its almost indestructible quality / design, is virtually indispensable in any laboratory. Thanks to its extremely compact design, it fits ideally as a table-top unit even in the smallest corner and can be connected electrically almost anywhere - power consumption only 180 watts! The minimum temperature deviations comply with DIN 58945 Sheet 1, and the appliance also has a timer, fresh air supply and overload/temperature protection. The appliances offered here are all from stock and have never been used - all components are in mint condition and undamaged - see pictures. The delivery takes place in a special wooden box, including power cable and operating instructions. Nodpfxoqv Avtj Abyedc Technical data: Temperature range 10-70 degrees External dimensions (WxHxD): 510 x 540 x 450 mm Internal dimensions (WxHxD): 260 x 350 x 320 mm Usable capacity approx. 28 liters DIN 12880 part 1 and 2 tested Protection class 1 IP 20 Temperature monitor according to DIN 12880 class 3.1 Shelves: 2 Weight: approx. 30 kg Shipment will be made within three working days of receipt of payment by a forwarding agent - you can of course also collect the appliance from us during regular opening hours. The total weight of the system including accessories and pallet is approx. 60 kg. The sale is aimed exclusively at traders, you will of course receive an invoice with VAT shown. Private buyers have the option of purchasing the device "on behalf of a customer"; direct commercial sales to private individuals are expressly excluded! The goods are sold under exclusion of any warranty or liability for material defects. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or for any injury to life, limb or health.

Year of construction: 2025, operating hours: 140 h, condition: like new (used), functionality: fully functional, machine/vehicle number: X-1500, Equipment: CE marking, Only 12 months old – like new , only 140 working hours. Immediate availability. Full documentation + CE. Can be demonstrated producing corners. Unique capability: up to 130×130 mm. Perfect condition – ready for production. Manufacturer: SIA Model: Edge Protector 130x130, Slitter 1500x1500, SCC Base 7 Year of Manufacture: 2025 Working Hours: 140 hours Technical Condition: Like new State: In production Edge Protector Specifications: - Size: Minimum 35x35mm, Maximum 130x130mm - Wall Thickness: Minimum 1.5mm, Maximum 8mm (10mm optional, depending on paper thickness) - Maximum Reels: 12 + 1 craft - Speed: 50m/min (60m/min optional, available on data regulation) - Glue heating - 7,5kw. Slitter Rewinder Specifications: - Reel Size: Maximum 1500x1500mm, Minimum Width 500mm - Minimum Cutting Width: 35mm - Number of Knives: 15 - Speed: Maximum 250m/min - Electrical Power: 11kW SCC Air Compressor Specifications: - Base: SCC Base 7 VSD TD - Electrical Power: 7.5kW - Air Volume: 0.92m³/min - Tank Volume: 500 liters Dimensions: EDGE PROTECTOR ; SLITTER : Length: 26000 mm; 3000MM - Width: 3000 mm ; 2300MM Ndodpez I S Idsfx Abyec - Height: 2500 mm ; 1300MM - Weight: 6000 kg ; 3500KG Keywords: corner production line, cardboard corner machine, edge protector machine, packaging corner line, cardboard profile machine, V profile machine, 130×130 mm corner, automatic corner cutting, high‑speed corner line, packaging machinery, cardboard converting machine, protective corner production, industrial packaging equipment.

Condition: good (used), functionality: fully functional, Year of construction: 2015, control type: CNC control, degree of automation: automatic, laser source manufacturer: IPG, laser source model: YLS-6000, laser power: 6,000 W, laser wavelength: 1,070 nm, positioning speed: 350 m/min, Equipment: CE marking, centralized greasing system, cooling unit, emergency stop, safety light barrier, TECHNICAL DETAILS General Information Manufacturer: EAGLE Model: iNspire 1530 F6.0 Machine Type: Laser Cutting System Weight: 18,000 kg Laser Source Laser Source: IPG Fiber Laser Laser Power: 6 kW Working Area and Travel Ranges Working Area: 3,000 × 1,500 mm X-Axis: 3,060 mm Y-Axis: 1,540 mm Z-Axis: 120 mm Dynamics and Positioning Maximum Cutting Speed X/Y/Z-Axis: 150 m/min Cutting Speed with Simultaneous Axis Movement: 280 m/min Positioning Speed: 280 m/min Acceleration: 60 m/s² Acceleration: 6 g Minimum Programmable Stroke: 0.001 mm/m Repeatability: 0.03 mm/m Cutting Accuracy: 0.05 mm/m Cutting Capacities Black Steel: 25 mm Stainless Steel: 25 mm Aluminum: 20 mm Brass: 12 mm Copper: 10 mm Pallet Load Maximum Sheet Metal Weight: 1,000 kg Gas Supply Air Pressure: 6 bar Nitrogen Pressure N₂: 25 bar Oxygen Pressure O₂: 10 bar Operating Times Beam Emission Time: approx. 4,400 h Laser Activation Time: 19,855 h Electrical Data Main Power Supply: 400 V / 50 Hz Power Consumption: 54 kVA Control Voltage: 24 V Machine Dimensions Length: 1,000 mm Width: 3,080 mm Height: 3,060 mm Cutting Head Overhaul: 9 months ago at the manufacturer EQUIPMENT IPG Fiber Laser Source Linear Motors in All Axes Carbon Crossbeam Composite Body Pallet Changer Nodez R D Dqopfx Abyjdc Various Nozzles Protective Lenses Additional Accessories