Used Conical Twin Screw Extruder for sale (8,373)

Year of construction: 2004, condition: reconditioned (used), Stock-No. 2054 1used, partly overhauled and functionally tested Single-screw extruder AlphaTec A-ES 75.28 Screw –Ø 75 mm- 28 LD main drive 75 kW- AC Screw speed up to 80 r.p.m. - adjustable 1x venting port with vacuum-pump cylinder barrel heating apporx. 30 kW installed 3x additional temperature controller for down-stream equipment Fpodpoiyya Ajfx Aikop Control board overhauled You´re welcome for inspection visit in our stock Wuppertal-Germany More extruders available

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Fpodpfxsiyynwo Aikjp Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Year of construction: 2004, condition: reconditioned (used), Stock-No. 2054 1used, partly overhauled and functionally tested Single-screw extruder AlphaTec A-ES 75.28 Screw –Ø 75 mm- 28 LD Fpjdpfxoiyx Uze Aikep main drive 75 kW- AC Screw speed up to 80 r.p.m. - adjustable 1x venting port with vacuum-pump cylinder barrel heating apporx. 30 kW installed 3x addituional temperature controller for down-stream equipment Control board overhauled You´re welcome for inspection visit in our stock Wuppertal-Germany More extruders available

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Fjdpfxsiyynds Aikspp Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Condition: used, Twin vertical band saw with log lengthener. Suitable for widths from 70mm to 200mm. Log length from 50cm up to 3.7 meters. Fpjdpfxeyh Hc Rj Aikop

Year of construction: 1999, condition: ready for operation (used), AMUT EA90/24 SINGLE SCREW EXTRUDER Type: RALDI Screw for PVC oil cooled Application: PVC, PE or PP Working hours 48.000 DC Drive 36,3 KW Year of construction: 1999 11 digital heating controllers Melt pressure and melt temperature display SIEMENS SIMATIC DISPLAY Operating hours: 48,119 h Trigger control via the extruder possible Condition: Good operational The extruder is my property Sachal extrusion machines Fodok Nn Dzepfx Aikepp D-26345 Bockhorn-Grabstede Bahnhofstrasse 6 Germany

Condition: new, functionality: fully functional, Unused single-screw extruder / recycling extruder - Screw diameter: 140mm - Drive: Siemens motor, 95 kW - Volumetric K-Tron metering system - Degassing zone - Optionally with die head Fedpfxjqy E Eve Aikjpp - Control system Optionally with strand granulator, water bath, etc. Inspection possible by arrangement.

Year of construction: 2011, condition: used, Intervac GmbH Mobile Double Chamber Vacuum Machine Fpedpfeym U Syox Aiksp Type: INV 11/11 Year of construction: 2011 230/400 V, 50 Hz, 2.5 kW Weight: 355 kg Seal length: (2x) 620 mm Dimensions chamber: (2x) 600 mm x 670 mm Total dimensions: 1550 mm x 970 mm x 1220 mm.

Year of construction: 1998, operating hours: 297 h, condition: ready for operation (used), functionality: fully functional, rotational speed (max.): 3,000 rpm, saw blade diameter: 200 mm, screw diameter: 35 mm, machine/vehicle number: E0195/10, No reserve price – guaranteed sale to the highest bidder! Single-screw extruder with only 297 operating hours, including cutoff saw and haul-off unit! Hussmann ES35 x 30D TECHNICAL DETAILS Screw diameter: 35 mm Length: 30D MACHINE DETAILS Motor power: 16 kW Operating hours: 297 h Cutoff Saw TECHNICAL DETAILS Three-phase motor speed: 3,000 rpm Three-phase motor output: 0.55 kW Saw blade diameter: 200 mm Haul-off Unit TECHNICAL DETAILS Haul-off speed: 20/30/40/50/60 m/min Haul-off force: 11,700 / 7,800 / 5,800 / 4,700 / 3,900 N Contact length: 800 mm Max. belt width: 160 mm Max. profile height: 160 mm MACHINE DETAILS Drive power: 2 - 5.6 kW Weight: 800 kg EQUIPMENT Complete electrical and electronic control system with remote control box Digital speed display Ammeter Fodpfjyrmzqsx Aikspp 10-step helical potentiometer

Condition: like new (used), Year of construction: 2013, BLOW EXTRUDER HDPE Fjdpfxewivdkj Aikepp Model EuroTruder 75 Made by Euro-Stel, Belgium YOM 2013 extruder: diameter 75x28 D - with neck sweder and granulate hopper mold is not included EXCELLENT CONDITION

Operating hours: 54,000 h, condition: ready for operation (used), functionality: fully functional, CINCINNATI PROTON 60-30G Screw diameter: 60 mm, L/D = 30 Grooved feed section Fjdpfx Aoyrihgjikopp Throughput: approx. 450 kg/h PE Motor (DC drive): 163 kW Screw speed: max. 221 rpm Tool zones: 5 pcs + 1 pc for adapter Melt pressure & temperature sensors included Control system: Cincinnati EXc Pro-NT Cylinder in bimetal design – condition: good Screw with wear-protection and hardened feed section – condition: good Dimensions (L x W x H): 2,580 x 1,430 x 1,800 mm Weight: 2,500 kg

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE • Model: FABO HY-600 • Type: Double Helix Screw Washer • Capacity: 60 ton per hour • Dimension: 1400 x 6650x1800 mm • Screw Size: Ø 600x6000 mm • Speed: 22 rev/min • Motor: 2 x 5.5 kW Heavy duty Gamak • Water Consumption: 55-205 m3 • Including chassis, motor and safety guards. Fpodpfx As Ahybmsikop FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Year of construction: 2026, condition: new, functionality: fully functional, Conical laboratory single-screw extruder EX 60/30 The extruder is designed for processing light, free-flowing granular materials. Due to its screw size, the extruder is suitable for laboratory and testing applications. The nitrided screw with a conical inlet section is fed with materials via a hopper, which then flow through the large inlet opening into the cylinder. Subsequently, the raw materials are compressed in the cylindrical screw section and discharged through a die. A direct drive with an upstream thrust bearing forms the drive train. Ceramic heating bands also allow for high processing temperatures. A shielding cooling system is installed between the material hopper and the first heating zone. Optionally, we also offer the following machines: Fpedpszhamwefx Aiksp The strands are passed through a water bath with a stainless steel tank to the strand granulator. A screen changer can also be offered as an option between the extruder and the die. Screw speed 150 Current 29.5A CEE-63A

Condition: used, Double Paddle Mixer Inside dimensions: 1000 mm x 750 mm x 650 mm Total dimensions: 1500 mm x 1040 mm x 1770 mm In good working condition Fodpfoym Ui Esx Aikspp Fully Stainless Steel

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, 2 Kowin 232 extruder pelletizing lines for sale one brand new 2024, second 2011 good working conditions output capacity 275Kg per H Fpsdoz D T Nbspfx Aikep genuine reason for selling

Condition: good (used), Ktron Soder Screw feeder Stainless screw feeder, batch feeder, 150Kg stainless hopper, twin screws, 35mm screw diameter, 3Ph Fjdpfx Ajz Ak Sgjikopp

Condition: good (used), Twin Ribbon Mixer Fully Stainless Steel Mixing Chamber Dimensions 1500mm Long x 1100mm Wide x 700mm Deep Fsdpequ Uykjfx Aikjpp

Condition: used, The Braibanti/Pavan extruder is designed for the continuous production of short-cut pasta, breakfast cereals, and pet food. The prepared dough is conveyed through a temperature- and moisture-controlled screw extruder toward the die, which ultimately defines the shape of the product. Extrusion takes place under controlled pressure and temperature to ensure consistency and structural integrity. At the end of the extruder, a motorized, speed-controlled rotating knife cuts the extruded product to the desired length. Prior to extrusion, the dough undergoes a structured preparation process. It begins with a two-step mixing system that combines dry and wet ingredients into a homogeneous mass. This system uses a single mixing arm with directionally adjustable paddles to ensure proper pre-conditioning and hydration. The final stage of preparation takes place in a high-performance mixer/kneader unit, which further develops the dough structure to achieve optimal plasticity, consistency, and elasticity-critical parameters for stable and high-quality extrusion performance. Continuous mixer - preconditioner PR210 ± 120L / screw Single mixing shaft with adjustable paddles, dual execution Fpsdjz Rl Ecopfx Aiksp Motor 2 x 15 Kw - 970 rpm Liquid and dry ingredient supply Inspection and cleaning hatch Mixer VM210 ± 300L Single mixing shaft execution with adjustable paddles Motor 3 Kw Extruder BR210 Dual execution, 2 extrusion heads Motor 2 x 37Kw - 1482 rpm Gearbox Sumitomo Cyclo Double-walled extruder housing, suitable for cooling Production capacity (Pet food) calculated at 30-40 kg/min (depending on the product) Operating pressure ± 30-40 bar depending on the die Powered cutting head/chopping knife (motor 1.1 Kw -920 rpm) Dimensions (L x W x H): 5.000 x 2.200 x 2.400 mm without electric cabinet and controls

Condition: new, power: 235 kW (319.51 HP), axle configuration: 4x2, color: white, driver cabin: day cab, gearing type: automatic, loading space length: 42,000 mm, loading space width: 23,800 mm, loading space height: 5,000 mm, Equipment: ABS, EBS, air conditioning, 2 units available Equipment: ZF automatic transmission Emission standard EURO VI E Steel rims Speed limiter 90 km/h Differential lock on drive axle, switchable Manual tilting cab Halogen headlights Standard cab with flat roof Cab rear wall with window Front underrun protection Chassis frame in gray Roof hatch, mechanical version First aid kit Electronic immobilizer and 2nd vehicle key Clothes rail on cab rear wall including sliding hooks Dirt-resistant interior (easy to clean) Rear axle ratio: 5.14 Comfort driver's seat, 4-way adjustable, air-suspended, integrated headrest and integrated 3-point safety belt Passenger seat bench for 2 people, center seat with 2-point belt Plastic steering wheel with function buttons for radio, telephone, cruise control and menu navigation EC control unit digital 4.1 Reinforced parabolic suspension on the rear axle Air filter unit on the right side behind the cab Standard braking system Wheel chocks, 2 pieces Left-hand drive for right-hand traffic Moderate climate version Vehicle badge standard Engine intake air heater for optimal cold start performance at extreme temperatures Engine air intake via snorkel, installed on the right side behind the cab Jack Air dryer for braking system, heatable C-profile steel ladder frame Air tank in steel version Radiator cover under the bumper for rough off-road use Chassis protection coating Tectyl 300 G Clear Battery disconnect switch, mechanical, on the chassis, right side Tipper version Reinforced parabolic spring on the front axle Standard frame overhang Heater for AdBlue tank Fuel tank 200 liters, plastic, lockable Fuel pre-filter on the frame, heatable AdBlue tank, 30 liters Transmission mode standard ConnectivityBox 4G, telematics contract optional RADIO with Bluetooth, DAB+ and 7-inch display Tire pressure monitoring system (TPMS) with internal sensors Expansion module for controlling auxiliary drives Adaptive cruise control (ACC) Lane departure warning system (LDWS) Extended driver distraction warning system Warning triangle, design and dimensions according to ECE-27 directive Rear lights standard Hill start assist, for comfortable starting on inclines Hazard warning lights Electronic stability program (ESP) Rear view monitoring system with camera Blind spot monitoring system (BSIS), right Intelligent speed assistant (ISA) Front field monitoring (MOIS) Emergency braking assist (AEBS) Pneumatic parking brake Preparation for alcohol interlock (ALC) with cable Fpodpfx Ais Aftpkjksp Voltage converter 24/12 volts (10.5 amps) On-board tools Two-stage engine brake. Can be activated using the right steering column lever Auxiliary drive with pump connection, suitable for Meiller tippers Rearview mirror for body width 2500 mm Steel bumper, 1-piece version (Heavy: 3-piece) Exterior mirrors, electrically adjustable and heated Sun visor, transparent, installed on the outside of the cab roof Fog lights Maneuvering and towing hitch at the front Armrest on the right side of the driver's seat,...

Condition: defective spare-parts repository (used), Year of construction: 2004, machine/vehicle number: A II 151768, Offer 25979 Defective screw compressor - compact unit Fjdpfowrcq Nex Aikopp - Operating hours: 16550 h - Operating pressure: 10 bar - Delivery rate: 15.9 l/s - Drive: 400 V / 7.5 kW - Motor speed: 3000 rpm - Air tank: 250 L - Space requirement: approx. W 700 x H 1830 x D 1050 mm - Weight: approx. 250 kg

Condition: new, For inquiries regarding the adapter plate, Mr. Herden is at your service (by phone). OilQuick OQ80 Adapter Plate / Bolt-on Adapter / NEW / in stock & immediately available Price: €4,990.00 net / €5,938.10 gross Hole pattern drawing available in the photos. - 2x 1/2" couplings - 1x 3/4" polystyrene coupling - 1x 3/4" coupling - 2x 1" couplings - Excavator class: 25 to 43 tons - Weight: 386 kg Suitable for a wide range of attachments, such as hydraulic breakers, sorting grabs, and also for the following Westtech products: - Westtech CL320 - Westtech C350 - Westtech C450 - Westtech C550 - Westtech CS610 compact (requires drain line) - Westtech CS580 (requires drain line) - Westtech CS780 (requires drain line) - Westtech R900 - Westtech R1300 - Westtech G1250 - Westtech G1650 - Westtech T4000 - Westtech W1350 - Westtech W1800 All compatible Westtech products are also in stock and immediately available! Fjdpfsy E Et Hjx Aikepp We also have many other OilQuick adapter plates available from stock! Mr. Herden (phone) is happy to assist you. We are happy to provide you with a financing offer upon request. We are an official distribution and service partner for: - OilQuick - Holp - Gierking GMT - Weber MT - Westtech - DMS - Seppi M. - Magni telehandlers - JCB construction machinery - Mercedes-Benz - Iveco With over 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We supply the full OilQuick product range! Errors and prior sale excepted! = Further information = Intended use: Construction Unladen weight: 386 kg Contact Marius Herden for further information.

Condition: good (used), Year of construction: 2010, This is your *KAESER SK 25 compressor + 500L tank + TBH 23 dryer*. - *KAESER SK 25 - SIGMA screw compressor* - *Part No. 101958.0 / Serial 1562* - *Hour meter:* Fedpfsz Ab A Aox Aikepp - Photo 1: *20,704 total hours* - This is low for a KAESER; they typically run for 60,000 hours. - Photo 2: *5,224 hours under load* (1) - This represents the core operating time of the machine. - Photo 3: *314 hours* - Hours under pressure (2). - *Displayed pressure 0.0 bar = normal shutdown, no fault.* - *Complete set:* - SK25 compressor (15 kW - approximately 2 m³/min at 8 bar) - Vertical tank X. PAUCHARD 500L galvanized (with pressure gauge) - KAESER TBH 23 KRYOSEC refrigeration dryer.

Condition: good (used), mileage: 58,636 km, power: 110 kW (149.56 HP), first registration: 01/2023, fuel type: diesel, tire size: 195/75R16, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: steel, number of seats: 3, total length: 7,050 mm, total width: 2,280 mm, total height: 3,180 mm, loading space length: 4,260 mm, loading space width: 2,190 mm, loading space height: 2,170 mm, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, tail-lift, traction control, = Additional Options and Accessories = - Heated mirrors - Halogen lamp - None - Tail lift - Manual - Radio/cassette - Lane keeping assist - Fabric = Notes = Configuration: 4x2, dual tires, payload: 715 kg, unladen weight: 2785 kg, gross vehicle weight: 3500 kg, cab type: single cab, cruise control, air conditioning, number of airbags: 1, parking assist: None, electric windows, electric mirrors, radio/cassette, Carplay, GPS navigation, color: multicolored, maintenance manual, heated mirrors, lighting type: halogen lamp, lane keeping assist, air conditioning, Bluetooth, engine power: 110 kW (148 hp), number of cylinders: 4, displacement: 1950 cc, fuel: diesel, Euro: 6, drive technology: timing chain, transmission type: manual, gears: 6, power steering, ABS, ASR, starter battery, body type: additionally extended, side wall paneling, step at the rear, roof rack: None, rear closure: roller shutter, central locking, number of seats: 3, seat arrangement: 1+2, seat cover: fabric, seat adjustment: manual, tail lift, tail lift design: tailgate, load capacity of the tail lift: 750 kg, tail lift manufacturer: Dhollandia dhlm.08, tail lift material: steel and aluminum, tail lift size: 160x218, box van with tail lift, dual tires, Mbux10 Euro6 150 hp!, spare wheel, spare wheel tread depth: 4 %, tire type: summer tires = Additional Information = Axle configuration Tire size: 195/75R16 Brakes: disc brakes Suspension: leaf spring suspension Axle 1: tire tread depth left: 3 mm; tire tread depth right: 4 mm Axle 2: dual tires; tire tread depth left inner: 7 mm; tire tread depth left outer: 7 mm; tire tread depth right inner: 7 mm; tire tread depth right outer: 7 mm Weights Unladen weight: 2,785 kg Payload: 715 kg GVW: 3,500 kg Functional Tail lift: Dhollandia dhlm.08, tailgate, 750 kg Height of the loading area: 93 cm Maintenance APK (technical inspection): valid until 01.2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial information Leasing price: 560 € per month (delivery van, 72 months); ask for further information and conditions Identification Fedpfszhgcrox Aikepp License plate: V-95-RBP

Condition: excellent (used), Year of construction: 2022, Wangen Twin NG70 Screw Pump Fpsdpfxjzt Ibgo Aikjp 2022, Stainless, designed to reliably pump low to high viscous, volatile or gaseous products and for applications where maximum hygiene and efficiency is required. The hygienic pump for food and beverages, chemicals and cosmetics. With touch screen HMI screen controls, all on mobile stainless skid, 3Ph

Condition: used, Year of construction: 1992, Technical details: volume capacity: 1,95 m³/min feed pressure: 10 bar Number of working hours: 9166 h total power requirement: 15 kw weight of the machine approx.: 360 kg space requirements of the machine approx.: L:1,54xB:1,3xH:1,2 m compact construction with integrated filter techn. details - max. operational pressure of the tank 11,5bar - operation voltage 380V - filter make Balwin type BT 364 slightly damaged covering, besides that top used condition Fedou Nzypepfx Aikopp We don't sell spare parts nor have spare parts available! *