Used Condensate for sale (951)

Condition: good (used), oil-water separation system, condensate separator, oil and water separator, oil separator, separator, oil/water separator, oil/water separator Dsdpfxjv Aip Uj Aa Iswc -Manufacturer: Kaeser, oil-water separator -Type: Aquamat 4 -Dimensions: 530/480/H1000 mm -Weight: 22 kg

Condition: used, Quantity: More than 40 available Dsdezlt Hxopfx Aa Iswc Manufacturer: Indu-Sol Type: PNMA II PROFINET measuring device, version 3.0 (114090100) Mounting: 35 mm DIN rail Dimensions: 105 × 39 × 74 mm Weight: 310 g Input voltage: 24 V DC (20-28 V, reverse polarity protection) Output voltage: 24 V DC (max. 1 A) Current consumption: approx. 50 mA Power dissipation: approx. 1 W Protection rating: IP20 Connector: RJ45 Delay: < 1 bit/s at 100 Mbit/s Cable length: up to 100 m (Cat5/Cat5E) Operating temperature: 0 °C to +70 °C Storage temperature: -15 °C to +75 °C Humidity: 10 – 90 %, non-condensing

Condition: new, Year of construction: 2021, functionality: fully functional, cooling capacity: 83 kW (112.85 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,230 kg, input voltage: 400 V, total width: 830 mm, total length: 1,840 mm, total height: 2,030 mm, warranty duration: 12 months, Aircooled chiller KKT cBoxX 90 83 KW Cooling capacity: 83 kW / 23.6 tons (tw2=20°C / tu=32°C ) Year of manufacture: 2021 Options: Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 2 pcs. Danfoss DSH161A4ALD (scroll) Type of refrigerant: R410а Number of fans: 2 pcs. (EC-fans) Hydraulic module: 1 pcs. water pump Grundfos ML90HA-J-H3-CML2A + 1 pcs. Grundfos ML132DA-J-H3-CML4A, buffer tank (open-type). Dimensions: 1.84x0.83x2.03 m. Weight: 1230 kg. Working hours: 1/1 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. Dedjzxc I Sspfx Aa Iowc The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), Year of construction: 2019, functionality: fully functional, cooling capacity: 84.5 kW (114.89 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,016 kg, input voltage: 400 V, total width: 1,200 mm, total length: 2,830 mm, total height: 1,800 mm, warranty duration: 6 months, heating capacity: 92 kW (125.09 HP), Aircooled chiller/Heat pump DAIKIN EWYQ085G XR036 84.5 kW / 92 kW Cooling capacity: 84.5 kW / 24.03 tons (12/7 — 35°C) Heating capacity: 92 kW / 26.16 tons (40/45 —7°C) Year of manufacture: 2019 Options: Heat pump. Hydraulic module. Dwodpfx Aezxdacja Iec Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Copeland ZP235KCE-TWD-522 (scroll) + 1 pcs. Copeland ZP182KCE-TFD-477 (scroll) Type of refrigerant: R410a Number of fans: 6 pcs . Hydraulic module: 2 pcs. water pump Lowara CIE370/1V/D. Dimensions: 2.83x1.2x1.8 m Weight: 1016 kg Working hours: 10380/468 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), Year of construction: 2016, functionality: fully functional, cooling capacity: 254.6 kW (346.16 HP), type of input current: three-phase, type of cooling: air, overall weight: 2,498 kg, input voltage: 400 V, total width: 2,300 mm, total length: 3,650 mm, total height: 2,350 mm, warranty duration: 6 months, Aircooled chiller TRANE CGAM090 254.6 KW Cooling capacity: 254.6 kW / 72.39 tons (12/7 — 35°C) Year of manufacture: 2016 Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. TRANE CSHN315K0BKM (scroll) + 2 pcs. TRANE CSHN250K0BKM (scroll) Type of refrigerant: R410А Number of fans: 8 pcs. (2 pcs. frequency inverter driven) Dimensions: 3.65x2.3x2.35 m. Weight: 2498 kg. Working hours: 8866/8858/7036/7022 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Dwjdpfxozxny Hs Aa Ijc Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, input current: 5 A, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, For sale: Losman air cleaning units in excellent condition, suitable for applications such as removing oil mist generated in metalworking. The cleaned air is returned to the workspace, and the condensed coolant collected during filtration can be recycled. There are 2 units available, one of which is from 2014. Both units have had their filters replaced. Dsdpfxjyk Skne Aa Iewc

Condition: new, I am selling new valves, dampers, and condensate pots, everything shown in the picture, also available individually. Purchased from Textilka, Switzerland. High-quality products, total weight approximately 4.5 tons. Dwedpfszzfdzjx Aa Isc

Condition: used, mileage: 340,560 km, power: 260 kW (353.50 HP), first registration: 12/2020, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 12/2026, color: beige, gearing type: automatic, emission class: euro6, total length: 9,790 mm, total width: 2,600 mm, total height: 2,630 mm, loading space length: 7,550 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, tail-lift, * Special equipment: Schmitz deep-freeze box * Refrigeration unit: Thermo King UT 800 * Temperature recorder * Box side wall: 50 mm * Double-wing doors: 80 mm Feroplast * Storage compartment, high engine tunnel * Axle load measurement device * Front axle load: 8.0 t * Trailer stabilization program: TSA * Audio system: Digital radio DAB / DAB+ * Equipment package: Comfort * Cab: steel-sprung, Comfort * Sun visor, side window, driver's door * Driver's seat: Comfort, air-suspended * Airbag, driver's side * Equipment package: Visibility * Bi-Xenon headlights * Rear lights: LED * Headlight cleaning system (HCS) * Exterior mirror, right, with maneuvering position * Battery: 220 Ah * Brake connection: Standard and DuoMatic * CB radio * Cockpit: Interactive multimedia * Navigation system * Remote query function: Remote Online * High-pressure air unit * Air horn * Electrical pre-wiring in the cab: 24V / 100 A * Driver assistance system: Turning assistant * Transmission: 12-speed - Type: G 211-12 * Manual lift roof (steel) * Automatic climate control * Fuel tank: 290 liters, aluminum, right * Air deflector, roof (lockable) * Engine brake: enhanced * Wheelbase: 5500 mm * Frame overhang: 2700 mm * Reversing warning: acoustic and warning flashing light (external warning signal) * Tail lift switch * Seats in the cab: Driver's seat with massage function * Exterior sun visor * Additional stabilizer: rear axle / trailing axle * Additional 12V / 15 A socket in the co-driver's footwell * 24V / 25 A socket in the co-driver's footwell * Preparation for 4 surround cameras (display in the onboard monitor) * Preparation for additional headlights * Preparation for additional turn signals * Auxiliary heater (water) * Additional equipment: * Reversing camera * Emission standard: EURO 6D * Axle configuration: 4x2 * Actros 5 * Actros cab: S / M * Approach / front mirrors, heated * Trailer brake: 2-line, connections on the left * Trailer socket: 24V / 15-pin * Exhaust pipe directed to the center of the vehicle * Batteries arranged side by side * Differential lock: rear axle * High-pressure air unit with condensate monitoring * Automatic switching for dipped headlights (light sensor) * Cab: Hydraulic tilting mechanism * Cab: M ClassicSpace, 2.30 m, tunnel 320 mm, cab floor with engine tunnel 320 mm, cab: width 2.30 m, cab variant: M * Storage flap, external, left * Storage compartments with lids behind the driver's and co-driver's seats * Vehicle outline lights: LED * Suspension: Air / Air (full air) * Power windows * Windshield: tinted * Speed limiter * (AdBlue): 60 liters * Comfort locking system * Air intake from the front * Heated air dryer * Engine: 7.7 liters - 260 kW R6 Diesel (OM 936), engine variant OM 936 * Waste heat recovery * Disc brakes: front and rear axles * Key with remote control (2) * Side marker lights: LED, flashing * Seats in the cab: Co-driver's seat * Splash guard, front * Stabilizer: front axle * 12V socket in the co-driver's footwell * Tachograph / EC tachograph * Truck Data Center 7 (fleet management system) * Underrun protection, front * Preparation for toll collection Dwjdozuhlbjpfx Aa Ioc * Preparation for Truck Data Center (fleet management system) * Front axle: curved * Permissible total weight: 18.00 t * Errors, changes and prior sale are subject to change.

Condition: new, Year of construction: 2025, functionality: fully functional, cooling capacity: 101 kW (137.32 HP), type of input current: three-phase, type of cooling: air, overall weight: 796 kg, input voltage: 400 V, total width: 1,180 mm, total length: 2,760 mm, total height: 1,810 mm, warranty duration: 12 months, Aircooled chiller CLIVET WSAT XEE 402 101 KW Cooling capacity: 101 kW / 28.72 tons (12/7 — 35°C) Year of manufacture: 2025 Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Сopeland ZP293KZE-TED-456 (scroll) + 1 pcs. Сopeland ZP182KCE-TFD-455 (scroll) Type of refrigerant: R410а Number of fans: 2 pcs. (Frequency inverter) Dimensions: 2.76x1.18x1.81 m. Weight: 796 kg. Working hours: 0/0 h. Condition: New CONDITION, TESTING & READINESS Dedpjzxqmcsfx Aa Iowc The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, Refrigerant Condenser, Liquid Cooler, Güntner Cooler, V-block Cooler, Industrial Radiator, Used Machine Manufacturer: Güntner Model / Type: GFD 080.1D/2x4-MS1D/4P.E Overall dimensions: 5404 x 2400 x 2850 mm Coolant: Ethylene glycol 35 Vol. % Weight: 2694 kg Cooling capacity: 331.7 kW Dedpfozkynysx Aa Iowc Number of fans: 8 pcs Fan diameter: 800 mm

Condition: used, mileage: 22,400 km, power: 115 kW (156.36 HP), first registration: 01/2023, fuel type: diesel, empty load weight: 4,798 kg, maximum load weight: 2,692 kg, overall weight: 7,490 kg, tire size: 215/75R17.5, axle configuration: 4x2, wheelbase: 3,020 mm, next inspection (TÜV): 03/2027, brakes: constant throttle, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 3, loading space length: 4,000 mm, loading space width: 2,350 mm, loading space height: 400 mm, Equipment: ABS, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), onboard computer, power assisted steering, traction control, trailer coupling, Vehicle location: Bovenden, ClassicSpace, Active Brake Assist, Mercedes PowerShift 3, steel body, short cab, suspension seat, double bench seat, rear window, electric mirrors, heated mirrors, electric window left, electric window right, cruise control, ABS (anti-lock braking system), traction control (ASR), constant throttle, auxiliary drive, frame cladding, differential lock, rotating beacon, leaf spring suspension, trailer hitch ball head, trailer hitch air + light, lashing eyes, U-shaped protection, swing flaps, sunroof, green environmental badge. Wheelbase: 3020 mm, Body: Meiller 3-way tipper body, Front axle: 4.1 t, Rear axle: planetary gear 325, hypoid, 6.2 t, Differential lock rear axle, Electronic braking system with ABS and ASR, Disc brakes, on front and rear axles, Condensate monitoring, for compressed air system, Stabilizer, under frame, Rear axle, Seatbelt monitoring, Standard cockpit, Pollen filter, ClassicSpace, Rain and light sensor, Driving program economy/power, Mercedes PowerShift 3, Pre-installation for toll collection, Daytime running lights, Engine brake, PTO MB 60-1c, Pump, Meiller pump, 5 pistons, Type 254/1, Lashing recesses, in the tipper body floor, Stability control assistant (ESP), Lane keeping assistant, Active Brake Assist. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors! Dwsdpfx Aaozn N Sio Isc

Condition: ready for operation (used), Year of construction: 2019, number of axes: 6, This 6-axis OTC Daihen EASY ARC V02.04 was manufactured in 2019. It features a robot working range with a radius of 1,445 mm and a maximum payload of 6 kg. The integrated welding table measures approximately 2,200 mm in width and 1,100 mm in depth, with a load capacity of around 1,000 kg. If you are looking to get high-quality welding capabilities, consider the OTC Daihen EASY ARC V02.04 welding robot we have for sale. Contact us for further details. Dwedpfx Aaey T Iyfo Ijc - System Type: Mobile Robotic Welding Cell (EasyArc)- Robot Kinematics: 6-axis vertical articulated robot- Robot Payload: 6 kg (Max. upper arm load: 10 kg)- Robot Working Range (P-Point): Radius 1,445 mm- Robot Repeatability: ±0.08 mm (Path), ±0.2 mm (Point)- Robot Drive System: AC Servo Motor- Robot Weight: 145 kg- Welding Power Source Model: OTC Daihen Welbee Inverter P400 (MIG/MAG, Gas-cooled)- Power Source Mains Voltage: 3 x 400 V / 50 Hz (+/- 15%)- Power Source Rated Input Capacity: 18.2 kVA- Welding Current Range: 30 - 400 A- Welding Voltage Range: 12 - 34 V- Power Source Duty Cycle: 400 A at 30%- Robot Controller: OTC Daihen FD11 (Model: EAFDB6-S000, Rated Input: 3.1 kVA, Phases: 3, Voltage: 400 V, Freq: 50/60 Hz, Mass: 60 kg)- Safety Enclosure: Lightweight protective housing with setup and loading doors equipped with electric safety interlocking switches- Welding Table: Integrated hole-pattern welding plate table prepared for clamping elements (Dimensions: ~2,200 mm width x 1,100 mm depth, Weight: ~600 kg, Load Capacity: ~1,000 kg)- Table Mobility: Legs equipped with swivel guide rollers and locking brakes- Horizontal Rotary Positioner: OTC Positioner PB Type (Max. payload 250 kg, Rotation speed 26°/s, Torque 205 Nm, Repeatability ±0.1 mm, Weight 110 kg, central bore in flange plate for media feed-through)- Environmental Conditions: Operating temp 0-45 °C, Humidity 20-80% (non-condensing)- max. 100 operating hours- 1 electronic axis is defective and needs to be repaired

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, overall weight: 800 kg, Equipment: compressor, cooling unit, Güntner - Basetec GFW 090.1/3 Dry Cooler / Condenser (64 kW) – air/glycol type Dsdpfsz Aau Rox Aa Ijwc - Type: GFW 090.1/3-S(S) - Cooling capacity: 64 kW - Number of fans: 3 - Unit dimensions: 460 x 120 x 185 cm - Capacity: 54 L - Weight: 600 kg - Stock: 2 units (manufactured in 2016 and 2017) Dismantled by a professional refrigeration company. The unit does not contain glycol. The transport costs depend on the weight, volume and above all the distance, the following information is important for inquiries: Delivery address (postal code and city name), but further details require a telephone contact, so please ask about transport costs and other delivery methods to contact us by phone. Our contact details can be found in the seller's legal information. Payment in cash on delivery on site. We sell and export worldwide, thanks to our very large warehouse capacity we can also flexibly and quickly deliver larger quantities. Please contact us before purchasing. We issue intra-Community invoices - without VAT. opening hours Mon-Fri: 8:00-16:00 Sat: closed

Condition: reconditioned (used), Year of construction: 2008, operating hours: 62,000 h, functionality: fully functional, machine/vehicle number: CSD 102 100260.2, overall weight: 1,280 kg, total length: 1,650 mm, total width: 1,041 mm, total height: 1,865 mm, power: 55 kW (74.78 HP), volume flow: 492 m³/h, operating pressure: 10 bar, pressure (max.): 11 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 40 °C, noise level: 69 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Kaeser CSD 102 compressor, - complete overhaul of the screw block - complete overhaul of the electric motor - new oil cooler Dwodpfsx Dihcjx Aa Iec - regular servicing - compressor accessories maintained according to the manual - external condensation dryer VRT 500 - water-oil separator with new filling - filter set with new inserts

Condition: new, Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 070826, Equipment: CE marking, NEW Equipment for feeding defrosted fish raw materials to the blanching area Equipment for blanching fish raw materials - Provide mechanized or manual delivery of fish raw materials (arranged in one or more layers) to the heat treatment area; · Provide heat treatment (blanching) liquid of fish raw materials (a mixture of water, salt water, water vinegar) or in a steam environment; Dwsdpfx Asv Dftxoa Ijc · The speed of the blanching conveyor is variable; · The blanching temperature is adjustable (50-100 C) and constant maintainable; · Impact insulation provided in the blanching area to prevent heat loss; · Ensure continuous supply of thermally processed fish raw materials and packaging area; · Provide water or steam connections and the possibility of draining overflow liquid or condensate and blanching liquid directly into the sewage system; Blanching power 600 kg per hour (If you need more, you can write, but send us the layout of the manufacture place.) Equipment for dosing fish raw materials in cans and packing cans - Equipment, (can dispenser for Hansa cans type), which provides a can sequential feeding to the raw material dosing area. Speed ​​min. 75 up to 90 cans/min. · Equipment that provides semi-automatic dosing of blanched fish raw materials in cans: manual placement of raw materials in the portioning area, mechanized portioning and mechanized dosing of the fish portion in a box. The operating speed of the line must be matched with the operating speed of the cans dispenser. Permissible deviation +- 4 grams Equipment for the accumulation of filled cans, which allows the accumulation of at least 2 min of packing capacity, min 150 cans; · Equipment that provides continuous weighing of cans with the possibility of diverting cans that are below the permissible deviation of the specified weight to the forgiving conveyor, and ensures the return of cans to the flow after the forgiving; · The equipment is easy to service and sanitary. · Number of employees servicing the equipment: 4 employees Automatic control unit - Provides automated equipment control and the ability to adjust the speed of equipment operation. ​Technical Maintenance & Stability: We provide expert maintenance, diagnostics, and spare parts availability to prevent unplanned downtime and ensure your lines run smoothly. Equipment: You can send separate parts if needed. 1- Fillet conveyor – 1pcs 2- Blanching conveyor line – 1pcs ( Blanching area 10m ) 3- Fillet dosing machine – 1pcs 4- Checkweigher – 2pcs 5- Can dispensing machine – 2pcs 6- Rotary table – 1 pcs 7- Conveyor line – 8pcs All line: 24m long Uses The line is designed for blanched fish fillets. Automatic filling of blanched fish fillets into "Hansa" type cans and weight control with feeding to the capping machine.

Condition: good (used), Year of construction: 2009, functionality: fully functional, cooling capacity: 648 kW (881.03 HP), type of input current: three-phase, type of cooling: air, overall weight: 6,000 kg, input voltage: 400 V, total width: 2,300 mm, total length: 7,000 mm, total height: 2,600 mm, warranty duration: 6 months, AIRCOOLED CHILLER TRANE RTAC 185 648 KW Cooling capacity: 648.0 kW / 184.25 tons (12/7 — 35°C) Year of manufacture: 2009 Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Copper / Aluminum Compressors: 1 pcs. Trane CHHP0N2TKG0N134A (screw) + 1 pcs. Trane CHHP0N1TKG0N112A (screw) Type of refrigerant: R134a Number of fans: 13 pcs. Dimensions: 7x2.30x2.6 m Weight: 6000 kg Working hours: 8934/6574 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Dwsdpfx Aaoz Ducpj Ioc Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), functionality: fully functional, The innovative QIAcube controls integrated components including a centrifuge, heated shaker, pipetting system and robotic gripper. This enables the QIAcube to fully automate more than 40 QIAGEN spin column kits. The QIAcube comes preinstalled with a variety of protocols for purification of RNA, genomic DNA, plasmid DNA, viral nucleic acids and proteins, plus DNA and RNA cleanup. All standard protocols in the expanding range can also be downloaded for free. In addition, custom protocols tailored to your specific application requirements can also be requested. The QIAcube is well suited for academic research laboratories and pharmaceutical, biotechnology and biomedical research laboratories performing applications such as: Sequencing / sequencing analysis Gene expression analysis genotyping proteomics Centrifuge: 12,000 x g maximum, swing-out rotor with 12 positions, maximum 45° Humidity: Relative humidity of 10-75% (non-condensing) Instrument dimensions: 650 x 620 x 570 mm Operating temperature: 18 – 28 ° C Pipetting system: Syringe size 1 ml, pipetting range 5-900 μl Dedpfxevzr Nbs Aa Iswc Samples per run: 1-12 samples per run Shaker: Speed 100-2000 rpm, amplitude 2 mm, heating range room temperature to 70°C, ramp time of

Condition: excellent (used), -Dimensions: 510x875x1400 mm -Serial number: 300758E -Condensation: Water -Refrigerant gas: 502 -Water-cooled compressor -Maximum gas pressure: 2000 KPa -Absorbed power: 2.55 kW -Maximum motor power: 1.90 kW -Protection: IP22 -Minimum water pressure: -Min: 200 (2 atm) -Max: 400 (4 atm) -Power: 5.60 kW -Voltage: 380 V Dwsdpowxu R Ujfx Aa Ijc -Weight: 115 kg

Condition: excellent (used), -Dimensions: 430x730x1565 mm -With pump -Hourly output: 40 L -Flavor: 1 -Voltage: 380 V / 50 Hz -Power: 1.6 kW -Condenser: air or water -Manufacture date: 17/7/2002 -Quality 828 -Serial number: IC 5879 -Software version: AESMD 36 Dodpfx Aewxu Sloa Iewc -Net weight: 200 kg

Condition: used, Year of construction: 2020, Sehr kompakt gebautes Wasserkühlgerät / Very compactly built Watercooled Chiller Kühlgerät / Chiller ef cooling Ernst H. Furrer EVO 60 Typ WKL 520 Wasserkühlgerät / Watercooled Chiller Baujahr / Year 2020 - Serial-No. 0520.008/36732 Kälteleistung / Cooling capacity 60kW Kondensationsleistung / Condensation performance 84kW Anzahl Kältekreisläufe 1 / Number of refrigeration circuits 1 Kältemittel je Kältekreislauf / Refrigerant per refrigeration circuit R410A, 4.4kg 2 Verdichter / Compressor Pumpe / Pump CM 10-5 Grundfos Wärmetauscher / Heat exchanger  Technische Dimensions: Length / Width / High 1800 x 850 x 2153mm Gewicht / Weight 640kgs Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Dwsdpfx Aaexlkg Ae Isc

Condition: ready for operation (used), Plant includes receiver tank with agitator, extractor, centrifugal pump, sealing water tank, corner tube sieve eluate line, corner tube sieve condenser, vacuum unit, condenser, oil heat exchanger, conveying unit V 3825 and 3821, sight glasses and fittings, with documentation. Dwodpfx Aajiquuvo Isc

Year of construction: 2020, condition: ready for operation (used), A complete Reisner refrigeration system including water tank, dry cooler and condenser is available. Version: split version, refrigerant: R513A, tank volume: approx. 3m³, cooling capacity: 170kW, medium: water, medium temperature inlet/outlet: 14°C/10°C, condenser recooling capacity: 230kW, dry cooler recooling capacity: approx. 170kW. Condenser dimensions X/Y/Z: approx. 4450mm/2250mm/1500mm, dry cooler dimensions X/Y/Z: approx. 7050mm/1600mm/1950mm. Documentation available. An on-site inspection is possible. Djdpfx Aaoy Hvqlj Iswc

Condition: ready for operation (used), Year of construction: 2016, Fuel: natural gas (NG), engine: HMG, space heating unit with CHP: yes, condensing boiler: no, additional heating unit: no, low-temperature boiler: no, B11 boiler: no, combi unit: no. Rated heat input P: 88kW, annual efficiency of the space heating system η: 136%, energy efficiency class: A++, usable heat output at rated heat input with additional heater switched off/on: 87.9kW, thermal efficiency at rated heat input with additional heater switched off/on: 57.5%, electrical efficiency at the heat output of the space heating unit with CHP with additional heater switched off/on: 33.5%, auxiliary power consumption at full load/part load el: 1.132kW, in standby mode P SB: 0.06kW, standby heat loss P stby: 0.442kW, annual energy consumption Q HE: 1345kWh, sound power level indoors L WA: 72dB, operating hours: 42,892h. Water was detected in the oil circuit, the unit has an oil-related fault despite sufficient oil being present, and it also shuts down with the message 'engine too hot'. The control unit was overhauled by the manufacturer in 2024, and regular maintenance intervals for oil changes, spark plugs, valves, etc. have been carried out. With documentation. Dwedpjxc Ni Refx Aa Ioc

Year of construction: 2019, condition: ready for operation (used), There is a recirculating air cooling system consisting of an Alfa Laval plate heat exchanger and a Thermofin finned tube heat exchanger. 1) Alfa Laval M10-BW plate heat exchanger, year of manufacture: 2005, cooling capacity: 115kW, flow rate: 28.2m³/h, refrigerant NH3. 2) Finned tube heat exchanger Thermofin TBN, year of manufacture: 2019. Including panel housing and condensate drip tray. Documentation available. Dedpfxet R Tr So Aa Iewc

Condition: ready for operation (used), Year of construction: 2003, A pure steam generator from the manufacturer Apparatebau Wärmetechnik GmbH, which was distributed by Spirax Sarco, is for sale with a condensate collector. Heat output: 446kW, max. operating pressure in the tubes/around the tubes: 13bar/6bar, operating temperature min./max.: -10°C/200°C, volume in the tubes/around the tubes: 33l/621l, medium in the tubes/around the tubes: saturated steam/steam. Documentation available. An on-site inspection is possible. Dedpezbl I Ujfx Aa Ijwc