Chiller

New Industrial Chiller CLIVET - 101 KW | With warranty

Condition: used, 4 tank containers made of stainless steel, used Contents: 35 cbm Order number: 4244 Material: 1.4404/1.4401 Fpsdpfev Dtgajx Ag Iel External dimensions: 7,820 mm length 2,438 mm width 2,591 mm height Operating data: according to type plate 1 container = -0.4/+4 bar operating pressure, 150 °C 1 container = -0.4/+3 bar operating pressure, 110 °C 1 container = +3 bar operating pressure, 120 °C 1 container = +4 bar operating pressure, 130 °C Design: cyl. horizontal container in a 20' transport frame with curved bottoms half pipe coil approx. 6.5 sqm heating surface, designed for 3 or 4 bar operating pressure 50 mm insulation around cylinder and bottoms connections: 2 domes DN 500 on the upper apex line and various connections outlet in the front weight: approx. 4.4 tons if required: frame for 4 tank containers made of painted mild steel, dismantled for transport external dimensions: 9,173 mm length, 7,254 mm width, 6,124 mm height additional charge on request.

Condition: good (used), Technical data are shown on pictures. Fpjdpop N Aq Hsfx Ag Iol

Year of construction: 2022, condition: as good as new (ex-display), Air handling unit with EC technology for hall climate control or heating, cooling capacity in conjunction with a chiller system of 150 kW at 7/12°C, heating capacity 300 kW, air flow rate 20,000 m³/h, 4 x 500 mm air outlets, compact design. Fpjdpjfzrgyjfx Ag Ijl

Condition: excellent (used), functionality: fully functional, Alfa Laval / Tetra Pak Cream Pasteurization Line Alfa Laval / Tetra Pak Cream Pasteurization Line | Piston Pump, Buffer Tank, Flowmeter, Pasteurizer Complete cream pasteurization line from renowned manufacturers Alfa Laval and Tetra Pak, equipped with high-quality pumps, valves, flowmeters, and control cabinets. The line is designed for hygienic and efficient cream pasteurization in the dairy industry. Capacity: 35,000 liters/hour Main components of the line: 1. Circumferential Piston Pump Manufacturer: Alfa Laval Type: DURACIRC 73 Serial Number: E256143 Year of Manufacture: 2021 Dimensions: 1600 × 600 × 800 mm Included: various valves and stainless steel filter housing 2. Stainless Steel Buffer Tank Tank dimensions: Ø 1100 × 1700 mm Total dimensions: Ø 1200 × 2900 mm 3. Alfa Laval Valves, Type: Unique SSV (6 pcs.) High-quality single seat valves for food applications 4. Flowmeter Manufacturer: Endress + Hauser Model: Promag P / Promag P Dimensions: 200 × 200 × 350 mm High-precision flow measurement for food-grade liquids 5. Centrifugal Pump Manufacturer: LKM Type: LKH 20/155 Power: 5.5 kW Production Number: 20-02319 Dimensions: 700 × 380 × 400 mm Stainless steel construction, suitable for CIP operation 6. Valve Manufacturer: Armaturen AG Type: MA9.31A6 5S Po Dimensions: 600 × 400 × 400 mm 7. Cream Pasteurizer Manufacturer: Alfa Laval / Tetra Pak Type: C10-SH Serial Number: 30104-38526 Year of Manufacture: 2003 Capacity: 1311 liters Operating parameters: Operating pressure (PS): 0 / 20.0 bar Test pressure (PT): 28.6 bar Temperature range (TS): 0 / 130 °C Dimensions: 5000 × 800 × 2200 mm High-efficiency heat exchanger system ensuring stable pasteurization Fpjdpfxextu Ugo Ag Iol 8. Centrifugal Pump Manufacturer: Pomac Type: CP29068/230 X 15 Serial Number: 22 818 Year of Manufacture: 12/2011 Capacity: 45 m³/h Power: 15.0 kW Dimensions: 950 × 400 × 500 mm 9. Nocado Valves (5 pcs.) Process valves for food applications 10. Control Cabinets Manufacturer: Eldon and IPBE Dimensions: 400 × 230 × 770 mm 1000 × 300 × 1000 mm The Alfa Laval / Tetra Pak Cream Pasteurization Line is a complete industrial solution with a capacity of up to 35,000 l/h, designed for high hygiene, precise process parameter control, and maximum reliability. Ideal for dairies, cream and milk fat producers.

Condition: new, functionality: fully functional, machine/vehicle number: 8153336470, overall weight: 616 kg, volume flow: 399 m³/h, pressure (min.): 4 bar, pressure (max.): 13 bar, noise level: 67 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, We are a company specializing in the compressed air industry for over 20 years. Professional level of service and high quality goods offered by our company - "proven" on the market - guarantee successful cooperation with you. We offer NEW screw compressor Atlas Copco GA37VSDs FF (variable speed with built-in dryer) Machine equipped with frequency converter (inverter), manufactured based on the latest technologies, which translates into greater efficiency and performance: On average 20% lower unit energy consumption (SER) than in previous models of the GA VSD series. Ecological and efficient VSD+ variable speed drive system reduces energy consumption by an average of 50% compared to models that operate at idle speed. Regardless of energy savings, efficiency (FAD) increases by up to 12%. Efficient fan motor (compliant with the ERP 2015 directive) reduces energy consumption and noise level. Fsdjwlp Hdopfx Ag Iepl Superior Motor Efficiency (iPM) up to 94.5% exceeding IE3 efficiency levels. Built to work hard for your success. The industry-leading GA Series oil-injected rotary screw compressor delivers unmatched efficiency, high productivity and low cost of ownership – even in the harshest conditions. Technical data: capacity at 4 bar: 15.69- 13.75 l/s / 0.94-7.85 m3/min capacity at 7 bar: 15.67-129.35 l/s / 0.94-7.76 m3/min capacity at 10 bar: 15.68-110.79 l/s / 0.94-6.65 m3/min Max pressure 10 bar (13 Bar variant on request) Voltage 400 V Motor 37 kW Noise 67 dB(A) Weight 616 kg Motor with internal permanent magnets (IPM) Compression element Direct drive Innovative fan Separator/oil filter with durable construction Electronic water drain valve that does not cause compressed air losses Controller Elektronikon Inlet valve VSDs module Manufacturer code: 8153336470 If you are not sure whether the device is right for you, you have not found the right compressor, CALL! We will advise you on the right choice of device. We invite you to familiarize yourself with our full offer.

Condition: used, functionality: fully functional, Used APV Rannie Blue Top 30/60 Homogenizer – Stainless Steel – 2-Stage High-quality APV Rannie “Blue Top” homogenizer, model 30/60, designed for reliable and efficient homogenization in dairy and food processing applications. This unit features a 2-stage homogenizing system, ensuring optimal particle size reduction and stable product consistency. The robust stainless steel construction makes it ideal for hygienic production environments. Technical details: Manufacturer: APV Rannie (Alfa Laval group) Model: Blue Top 30/60 Configuration: 2-stage homogenizing valve Motor power: 15 / 18 kW Plunger diameter: 30 mm Connections: approx. 1" – 1.5" Fpjdpfxeyud Rno Ag Isl Material: Stainless steel Performance: Estimated capacity: approx. 1,500 – 2,000 L/h Working pressure: up to approx. 150–250 bar (depending on product and operating conditions) Condition: Used, good working condition Location: Denmark Price: On request

Condition: excellent (used), Year of construction: 2008, Climaveneta cooling unit Fpjdpfxsf S A R Hj Ag Iel (Schiller - Water) Year of manufacture: 2008 Type: FOCS/LN 0751 Power: 70.1 kW

Condition: excellent (used), Aluminum silo (plastic granulate silo) standing on a base ring – used – designed for a bulk density of 1.0 kg/dm³ Volume: 105,000 liters Manufacturer: Zeppelin Available quantity: 1 Diameter: approx. 3,000 mm Cylindrical height: approx. 17,500 mm Overall height: approx. 15,000 mm (including 1,250 mm roof edge railing) Material: AlMg3 Bulk density: 1.0 kg/dm³ Inclination of the upper floor: 15° Inclination of the cone: 60° Equipment and connections: In the upper floor: 1 x access dome DN 500 with hinged cover 1 x ventilation opening with hood 2 x flange DN 100 PN 10 (filling + level indicator) 1 x stub for full-level indicator 1 x roof edge railing with handrail 2 x crane eyes On the shell: 1 x access door 850 x 2000 8 x pipe support for filling pipe DN 100 1 x filling pipe DN 100 1 x cable duct Fpedpfxelg Dcfj Ag Iel 1 x stub for full-level indicator The silo ends at the bottom in a 60° cone with a flange DN 200 (discharge height: approx. 500 mm) and a suction box. The currently connected measuring and control technology is included. However, no guarantee is given for its function! Additional cost: The silo has a two-part ladder with back protection and a landing platform (additional cost: €950 plus VAT). Otherwise, as shown in the pictures and drawing.

Condition: excellent (used), Two-chamber aluminum silo (plastic granulate silo) standing on a base ring – used – Capacity approx. 70,000 liters Diameter approx. 3,000 mm Cylindrical height approx. 9,250 mm Overall height approx. 14,850 mm Container with an upper conical bottom and a lower cone. Fpodpfsf D Hygex Ag Iel On the top of each chamber: 1 dome DN 600 1 vent stub DN 100 1 flange stub DN 80 The lower conical bottom ends in 2 square outlet stubs, approx. DN 250 Otherwise, see photos. The silo has brackets for a two-section ladder with back protection, which can be purchased separately; price upon request.

Condition: excellent (used), Year of construction: 2016, GEA Niro Ariete NS2006P piston homogeniser Serial: 12590 Fpjdpfjw Ulc Eox Ag Iol 2016, Stainless, Max Press. (Mpa) 25, rated flow rate 150 dm3/h, 3Ph, with box of spares