Used Trumpf Tlc 1005 for sale (396)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 59,480 h, laser power: 3,200 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 600 mm, swivel angle B-axis (max.): 100 °, swivel angle C-axis (max.): 360 °, No reserve price – guaranteed sale to the highest bidder! Predecessor model of the well-known TruLaser Cell series TECHNICAL DETAILS Category: 5-axis 3D laser cutting system Condition: Fully serviced (twice annually by Trumpf UK) Last service: January 2019 New vacuum pump installed: 28/05/2019 Working Area X-axis: 3,000 mm Y-axis: 1,500 mm Z-axis: 600 mm B-axis (rotational axis): +100° C-axis (rotational axis): n x 360° Laser Source Model: TRUMPF TLF 3200 Turbo Laser power: 3.2 kW Pilot laser: Present (for programming support) Control & Software CNC control: Siemens 840D with 3.5" floppy disk drive Network connectivity: Available (including analog modem for remote maintenance) Gsdpfx Aexv Slhofnein Software: ToPs 100 with nesting module & IGES translator + ToPs 800 with fixture design & 3D IGES translator MACHINE DETAILS Beam on: 14,922 h Laser on: 59,480 h Dimensions: 3.0 x 1.5 x 0.6 m EQUIPMENT - Logbook function for laser power monitoring - Power supply cabinets - Closed-loop water cooling with air circuit - 5” high-pressure cutting optics - Setup device - Class 1 laser safety housing with manual sliding door - Extraction unit with particle filter (2,000 m³/h) - Stationary worktable

Condition: excellent (used), Year of construction: 2008, table length 4000 mm table width 1500 mm burner heads 1 Control SIEMENS 840D Capacity 6000 Watt speed 10 m/min weight of the machine ca. 19 t dimensions of the machine ca. 9,5 x 7,3 x 3,1 m This Trumpf TrueLaser Cell (TLC) 7040 with 6 KW is a 5-axis laser machine. Description: - Max. Sheet thickness: ST:20mm / VA:20mm / AL:15mm - Closed machine room - Laser TruFlow 6000 - ADC cutting head - Positioning laser diode - Suspended control panel stationary, rotatable - Teach panel Gisdou N I Eropfx Afnon - Magnetic coupling, head detection - Laser power control - Power cycles - Laser welding

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, operating hours: 8,416 h, laser power: 3,200 W, sheet thickness steel (max.): 10 mm, sheet thickness aluminum (max.): 4 mm, pipe diameter (max.): 152 mm, working length: 6,500 mm, TRUMPF Tube Laser Cutting System with LoadMaster Tube 6.5 m and extensive additional equipment! TECHNICAL DETAILS Maximum tube diameter: 152 mm Maximum working length: 6,500 mm Material thickness (steel): 10 mm Material thickness (stainless steel): 5 mm Material thickness (aluminum): 4 mm Laser power: 3,200 W MACHINE DETAILS Control system: SIEMENS Sinumerik 840D SL Operating hours: 24,428 / 8,416 h EQUIPMENT - LoadMaster Tube 6.5 m with bundle magazine - Robust machine frame with integrated laser unit - Feed station with self-centering clamping jaws - Raw material tube support with automatically retractable pipe rests - Through-feed chuck with self-centering parallel clamping rollers - High-precision drives - Discharge station for finished workpieces up to 3 m in length - Tube support for finished parts with extendable guide rollers - Scrap conveyor with collection bin - Enclosed beam guide - NitroLine - FocusLine - Laser power control - Programmable cutting gas pressure - Automatic power on/off - Ergonomic control panel with touch color screen - Work area illumination - High-frequency excitation - Maintenance-free turbo radial blower - TASC 3 laser control - Laser logbook function - Cooling unit - Single cutting head strategy - Lens cutting head, 155 mm focal length - ControlLine - Simple operation - Online support - Diagnostic functions - Integrated technology data - Remote service via internet - RJ45 network interface and USB port - CE marking - Multi-beam light barriers Gsdjygu Tkopfx Afnoin - Monitoring system for gas pressure, temperature, and cooling water, among others - Compact dust extraction system - Protective enclosure with polycarbonate (Makrolon) panels - Jaw sets with clamping range 20–85 mm and 85–152 mm - Quick-change forming shells for round tubes up to 152 mm - Quick-change forming shells for rectangular tubes (up to a circumscribed circle of 85 mm) - Quick-change forming shells for rectangular tubes (up to a circumscribed circle of 170 mm) - Guide rollers for round and rectangular tubes - SeamLine Tube with inner seam detection - Adaptive clamping technology – feed station, small circumscribed circle - Adaptive clamping technology – feed station, large circumscribed circle - Adaptive clamping technology – through-feed chuck, small circumscribed circle - Adaptive clamping technology – through-feed chuck, large circumscribed circle Note: The machine will be dismantled on 02/03/2026 and can be inspected under power until then.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 41,657 h, controller model: SINUMERIK 840 D SL, laser power: 5,000 W, working length: 3,000 mm, working width: 1,500 mm, TECHNICAL DETAILS Working area: 3,000 x 1,500 mm Laser power: 5,000 W Current laser power: 5,335 W (as of 27/04/2023) Gisdpeyhmvtjfx Afnon MACHINE DETAILS Control system: SINUMERIK 840 D SL Power supply: TruDisk via the machine Solid-state laser: TruDisk 3001 with 1 fiber optic output Operating hours Operating hours: 67,508 h Laser on-time: 41,657 h EQUIPMENT Excitation via pump diodes Laser power control Automatic shut-off Torque drive in combination with linear direct drives Enclosed beam guide with fiber optic cable (LLK) Machine chiller unit (water-air) Integrated control cabinet lighting Automatic longitudinal pallet changer 17" touch color display Wide longitudinal conveyor belt Workspace lighting Positioning laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Copper cutting package (includes cutting data) Brass cutting package (includes cutting data) Universal cutting unit with fully adaptive lens system Piercing head strategy Protective glass against lens contamination Protective glass monitoring ControlLine: height control and sheet edge detection Simple workshop programming Advanced workshop programming Fast re-run Integrated technology data Programmable cutting gas/pressure selection FastLine FlyLine AdjustLine Teleservice via internet Data transmission via USB interface RJ-45 network connection Safety with CE marking Light barriers Multi-chamber extraction system Compact extraction unit Machine enclosure with certified viewing window Right-hand door and electric roll-up roof

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2000, bending force (max.): 85 t, stroke length: 215 mm, throat depth: 410 mm, distance between stands: 1,750 mm, working length: 2,050 mm, TECHNICAL DETAILS Gisdpfxeyhmdqe Afnjn Press force: 85 t Bending length: 2,050 mm Distance between uprights: 1,750 mm Stroke: 215 mm Throat depth: 410 mm MACHINE DETAILS Control: DELEM Dimensions & Weight Machine dimensions: 2,700 x 2,100 x 2,400 mm Weight: 7,900 kg EQUIPMENT Two-hand operation 2 support arms Side safety doors Lasersafe Fissler Wila tool clamping Adjustable die position Crowning system Tool cabinet

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 7,790 h, controller model: B&R APC 910, laser power: 3,000 W, sheet thickness (max.): 20 mm, working length: 3,000 mm, working width: 1,500 mm, TECHNICAL DETAILS Table length: 3,000 mm Table width: 1,500 mm Laser power: 3,000 W Sheet thickness (steel): 20 mm Sheet thickness (stainless steel): 16 mm Sheet thickness (aluminium): 12 mm Travel speed: 100/140 m/min Accuracy: 0.1 mm MACHINE DETAILS Control: B&R APC 910 Connected load: 33 kVA Dimensions & Weight Space requirement: approx. 7,800 x 5,900 x 2,300 mm Machine weight: approx. 11,400 kg Controller power-on hours: 2,472 h Operating hours: 15,907 h Laser power-on hours: 7,790 h EQUIPMENT Integrated solid-state laser TruDisk 3001 with 1 fiber output Fully automatic pallet changer (with light barrier) Enclosed machine frame with integrated components Motion unit for high-precision processing Drives with maintenance-free three-phase servo motors Sheet support accessible from both sides Enclosed beam guidance via laser light cable (fiber optic cable) Fully integrated chiller for laser and machine Integrated control cabinet Travelling fume extraction system Slag drawers 19" touch colour screen TruDisk power supply via machine Workspace lighting Positioning laser diode PierceLine FocusLine NitroLine Transport and installation device Copper cutting package (includes cutting data) Brass cutting package (includes cutting data) TRUMPF Laser Fiber optic cable as per standard layout (laser placed directly next to machine) Excitation via pump diodes Laser power control Laser logbook function Universal cutting unit Pierce head strategy Protective glass against lens contamination ControlLine: Height control and detection of sheet outer edge Simple drawing module Easy workshop programming Quick reproduction Integrated TRUMPF technology data Auto shut-off Programmable cutting gas/pressure selection ContourLine FastLine Microweld Tele-service via Internet Microjoint - handling at the control panel Adjustable dynamics Data transfer RJ45 network connection and USB interface CE mark Compact extraction unit Gijdeyhmxuepfx Afnsn Machine enclosure with certified viewing windows Motorised front door and rear access Enclosed machine roof

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 28,459 h, machine/vehicle number: A0220A2141, controller model: Siemens Sinumerik 840 D, laser power: 4,000 W, sheet thickness (max.): 20 mm, working length: 3,000 mm, working width: 1,500 mm, TECHNICAL DETAILS Working area: 3,000 x 1,500 mm Gsdpeyilfaofx Afnjin Maximum sheet thickness, mild steel: 20 mm Maximum sheet thickness, stainless steel: 15 mm Maximum sheet thickness, aluminium: 10 mm Laser power: 4 kW MACHINE DETAILS Control system: Siemens Sinumerik 840 D Laser type: TruFlow 4000 Laser power: 4 kW Type: CO2 Dimensions & weight Dimensions (L x W x H): 9,300 mm x 4,600 mm x 2,200 mm Weight: 12,000 kg Operating hours (as of January 2026) Beam-on hours: 28,459 h Laser-on hours: 51,970 h EQUIPMENT TruTops license (additional charges may apply for license transfer to Trumpf)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, laser power: 3,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, table length: 3,000 mm, table width: 1,500 mm, TRUMPF TruLaser 5030 3kW Fiber with LiftMaster! Laser head replaced in 2024 TECHNICAL DETAILS Godpoygw Rlefx Afnjin Table length: 3,000 mm Table width: 1,500 mm Cutting heads: 1 Maximum sheet thickness (mild steel): 20 mm Maximum sheet thickness (stainless steel): 15 mm Maximum sheet thickness (aluminium): 15 mm Maximum sheet thickness (copper): 4 mm Maximum sheet thickness (brass): 3 mm Laser power: 3,000 W Laser source: TruDisk3001 (4C) MACHINE DETAILS Control unit: CNC Last documented maintenance: 10-12 September 2025 Operating hours: as of September 2025 – 53,082 h (currently approx. 54,000 h) Dimensions & Weight Required space: 9,300 x 4,700 x 2,200 mm Weight: 12,700 kg Electrical connection: 40 kVA / 80 A Power consumption: 23 - 33 kW EQUIPMENT CE documentation and manuals LiftMaster Automatic nozzle changer Extraction/filtration system Operating manual Chiller + extraction Compressor not included Please note: Transport of the machine requires 1 standard truck and 1 truck with 3 m width.

Condition: good (used), Year of construction: 2003, Trumpf Trumatic L3020 Co2 Laser Fully working condition - removed from working factory Working Range X axis - 3000mm Y axis - 1500mm Z axis - 115mm Giedpfx Ajt H Iv Rjfnjn Overshoot range X axis - -16- +88 Y axis - 19 - +61 Z axis - - 2 - +16 Max Travel range X axis - 3104mm Y axis 1580mm Z axis - 117m Control - Trumpf CNC Control based on siemens sinumerik 840D Electrical Connections with TLF 3200 - 73 kVa Fuses (at 400v) - 125A Speed - Max. positioning speed, Parallel to axis - 60m/min Simultaneous - 85m/min Accuracy - smallest programmable increment. Positioning accuracy - +0.1mm Repeatability - +0.03mm Max laser power in cw mode with TLF3200 - 3200W Max material thickness - 20mm

Condition: ready for operation (used), controller manufacturer: Bosch, nominal power: 5.9 kW (8.02 HP), All tools indexing Full option machine!! Rotating tool adaptor Aut repositioning device with footpedal Programmable footpedal Giedpfx Afsyhib Sjnen Auto toolchanger with 22 stations 3 plate clamps Programmable chute for parts 500 x 500 mm Container for workpieces Punch spray lubrification 2nd lubricant container Exhaust device Chip container Rapid shutdown of hydraulic system External control panel Graphic workshop programming Workshop programming SW package for PC Safety equipment RJ45 network connection options: - MultiTool - MultiShear - MultiBend - Deburring tool - Threadforming - Chipconveyor - Automatic closing of clamps - Part trap detection sensor Nice selection of tools inlcuded + punch tool grinder Punching pressure: 180 kN Max sheet thickness by punching + nibbling: 6,4 mm Max weight workpiece: 230 kg Working range on cross-side (X-axes): 3000 mm Working range along (Y-axes): 1600 mm Positioning speed along X-axes: 90 m/min Positioning speed along Y-axes: 60 m/min Toolchanger: 22 tools Changingtime: 0,3 / 3 sec

Condition: excellent (used), Year of construction: 2010, Tekol / Trumpf Laser Welding System Tekol LAP S4 with TRUMPF TruPulse 44 and TBH GL230 Extraction Unit Description: For sale is a professional laser welding system Tekol LAP S4 equipped with an integrated TRUMPF TruPulse 44 pulsed Nd:YAG laser and TBH GL 230 extraction and filter unit. This system is an enclosed precision laser welding station designed for fine, pinpoint, and low-distortion welding of metal components. The pulsed laser enables highly controlled heat input, clean weld spots, and reproducible results. Ideal for precision engineering, toolmaking, repair welding, prototyping, and small series production. Enclosed safety housing with protection system, control panel, rotary indexing table, and extraction/filter system. Technical Data – Tekol LAP S4 Operating voltage: 400 V ~ N / PE Mains type: 3~ 400 V, 50 Hz Nominal current: 32 A (approx. 22.5 kVA) Control voltage: 24 V DC Dimensions: Length: approx. 1330 mm, Depth: approx. 1300 mm, Height: approx. 2030 mm Weight: Machine: approx. 800 kg Travel: X-axis: approx. 160 mm Y-axis: approx. 100 mm Z-axis: approx. 100 mm Rotary indexing table: 2-station Godpfx Aoyi Sgaefnjin Technical Data – Laser TRUMPF TruPulse 44 Laser type: Nd:YAG pulsed laser Wavelength: 1064 nm Max. average power: 42 W Min. pulse power: 201 W Max. pulse power: up to 3 kW Pulse duration: 0.2 – 50 ms Max. pulse energy: 30 J Max. pulse frequency: up to 900 Hz Beam parameter product: 16 mm·mrad Technical Data – Extraction Unit TBH GL 230 Voltage: 230 V / 50–60 Hz Power: 0.36 kW Free-blowing air volume: approx. 390 m³/h Effective air volume: approx. 330 m³/h Max. negative pressure: 4000 Pa Sound level: approx. 51 dB(A) Weight: approx. 40 kg Multi-stage filter system: - Pre-filter - Particle filter - Activated carbon filter Total weight approx. 900 kg Condition: used Scope of supply: (see photos) - Tekol LAP S4 laser welding system - TRUMPF TruPulse 44 laser unit - TBH GL 230 extraction unit - Documentation / folders / data carriers - Keys and accessories as shown (Specifications and technical details are subject to change and errors!) If you have further questions, please feel free to contact us by phone.

Condition: ready for operation (used), controller manufacturer: Siemens Sinumerik 840D, laser power: 2,400 W, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,750 mm, total length: 8,400 mm, total width: 7,800 mm, empty load weight: 22,500 kg, De machine is nog steeds functioneel en in gebruik. Uitgerust met: - 3 plaatklemmen - Sheetmaster-lossysteem - GripMaster Gsdpfx Aeygyvqefnsin Workpiece dimensions: 3085 x 1650 mm Type of Laser: Trumpf TLF Max cuttingthickness in steel: 8 mm Loading System: yes, SheetMaster

Condition: ready for operation (used), Year of construction: 2014, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D SL, laser power: 3,000,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, overall weight: 12,700 kg, total width: 3,000 mm, total height: 2,400 mm, product length (max.): 9,400 mm, number of axes: 3, This 3s TRUMPF TruLaser 3030 Fiber cutting machine was manufactured in 2014. It features a powerful 3,000 W TruDisk 3001 solid-state fiber laser, with a maximum cutting capacity for mild steel up to 20 mm. The machine offers impressive positioning speeds and a spacious working area, making it suitable for various applications. Consider the opportunity to buy this TRUMPF TruLaser 3030 Fiber cutting machine. Contact us for further details. • Positioning speeds: • Max. speed X: 100 m/min • Max. speed Y: 100 m/min • Max. simultaneous X/Y: 140 m/min • Cutting capacity: • Max. mild steel thickness: 20 mm • Max. stainless steel thickness: 15 mm • Max. aluminum thickness: 15 mm • Max. copper thickness: 6 mm • Max. sheet weight: 900 kg • Machine data: • Connected load: 37 kVA • Compressed air consumption: 35 Nm³/h • Color: White / Blue • Integrated features: • Integrated electrical cabinets with internal lighting • Work area lighting • Positioning laser diode • Spray device • Automatic nozzle cleaning • Laser and technology functions: • FocusLine • NitroLine • PlasmaLine • PierceLine Gsdpsyka Dvsfx Afnjin • ContourLine • FastLine • FlyLine • AdjustLine • MicroWeld Additional equipment • Conveyor belt for small parts / slag

Condition: excellent (used), Large flanging device Make Trumpf Type CS 20 CN 20 Gisdpfx Afou Nuyconon (28202) suitable for Trumpf CS 20 and CN20 very good condition, very little used

Condition: ready for operation (used), Year of construction: 2014, operating hours: 48,274 h, number of axes: 6, pressing force: 326 t, This TRUMPF TruBend 7036 press brake was manufactured in 2014. It features a robust welded steel frame, electro-hydraulic top drive, and a 2D graphic control DA 69 system on a 10.4" color screen. The machine includes a CNC backgauge with 6 axes, hydraulic tool clamping, and CNC crowning for precise bending. Regularly serviced under a TRUMPF maintenance contract. Contact us for more information about this machine. • Free column clearance: 3680 mm • Installation height: 535 mm • Control system: 2d graphic control da 69 on windows with 10. 4" color screen • Electrical equipment: for three-phase current 400 v / 50 hz • The machine was serviced annually • Maintenance contract in place • Sturdy machine frame, welded all-steel construction • Press beam with high bending strength • Highly dynamic electromechanical direct drive (torque motor) • Electro-hydraulic top drive via proportional valves • Modern block hydraulics • Inductive length measuring system with temperature compensation • CNC backgauge system: 3-axis (X1, R1, Z1) and 6-axis options • Rack and pinion drive for X and R axes • Safe, front-accessible movement of stop fingers • Modufix top tool holder system, self-centering, manual clamping • Manual lower tool holder for EV dies, hardened, programmable offset • Integrated TRUMPF TASC 6000 control • Numerical workshop programming • Embedded Windows XPe operating system, Pentium M 1.1 GHz • 1 GB RAM • 15-inch touchscreen • Network-enabled, teleservice via modem • Control cabinet climate control • Side-hinged safety doors and rear protective cover • 2-button foot switch for standing or seated operation • Rear work area LED lighting • Front work area LED lighting • Ergonomics package: comfortable front work surface and footrest • 2 storage brackets and 2 document trays • 24000 operating hours, brakes replaced 2024 • Tools maintenanced by TRUMPF, all in tolerance Additional equipment • Backgauge system with 5 axes and control cabinet climate control • Upper tool clamping: hydraulic and hardened • Lower tool clamping: hydraulic • CNC Crowning • BendGuard safety device • Foot switch • 2x support consoles, front • 1x bending aid with 900 mm parking position • Table extension for base table / additional table Technical Specification Bending Length 1020 mm Giedpfjx D D Hyex Afnsn

Condition: ready for operation (used), Year of construction: 2007, This TRUMPF TruBend V5050 press brake was manufactured in 2007. It features a press force of 500 kN and a bending length of 1275 mm. Equipped with a stable machine frame, electro-hydraulic upper drive, and a 2-axis backgauge system, it ensures precision and efficiency. Ideal for high-quality bending operations. Contact us for more information about this machine. Additional equipment • Stable machine frame as a welded construction in all-steel construction / Pressure beam with high bending strength / Spherical bearing of the pressure beam with pressure beam inclined position / Electro-hydraulic upper drive with 2-cylinder technology / Proportional valve technology and switchable double pump / Modern block hydraulics with control valves mounted on the cylinder / Electronic pressure compensator / Measuring system with centrally mounted glass scales and temperature compensation / Upper tool holder system "New Standard Clamping" manual, hardened, self-centering, for vertical tool changes / Lower tool holder with hydraulic clamping, hardened / Programmable lower tool displacement (pneumatic, 2 positions) / 2-axis backgauge system with rack and pinion drive for X and R axes, 2 stop fingers with secure front adjustment / Machine control: TRUMPF TASC 6000 / Control panel with LCD keypad, foot switch for emergency up, down, and emergency stop / Safety device: integrated side doors / Control cabinet cooling (air-to-air heat exchanger) / Oil cooler / Network-capable / Modern machine design / Installation, commissioning, and instruction / Hydraulic upper tool clamping / BendGuard / TruBend documentation Gsdpox D Hb Hsfx Afnjin Machine Benefits Technical Machine Benefits • Press force: 500 kn • Bending length: 1275 mm / free column clearance: 1040 mm / installation height: 385 mm • The machine was serviced annually by trumpf. • Trumpf maintenance contract.

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 21,572 h, machine/vehicle number: A3231E0369, control type: CNC control, degree of automation: automatic, controller manufacturer: Siemens, controller model: Sinumerik 840D SL, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruDisk 12001, laser power: 12,000 W, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, sheet thickness stainless steel (max.): 50 mm, sheet thickness aluminum (max.): 40 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, positioning speed: 140 m/min, type of cooling: water, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, nozzle changer, safety light barrier, TRUMPF TruLaser 5030 fiber (L76), 12 kW (2022). High-spec 2D fiber laser cutting machine with 3000 x 1500 mm working area and Siemens Sinumerik control. Key technical data Manufacturer: TRUMPF Model/Type: TruLaser 5030 fiber (L76) Year: 2022 Working area: 3000 x 1500 mm Laser power: 12,000 W Control: Sinumerik 840D SL Max. sheet thickness: Steel 50 mm / Stainless 50 mm / Aluminium 40 mm Max. speed: 140 m/min Configuration / equipment (highlights) Box frame; longitudinal conveyor belt; gantry drive with linear direct drives Giedpfx Ajyddbrsfnen Process cooler for machine and laser (water/air); work area illumination; pilot laser Spraying equipment; automatic nozzle cleaning; closed beam guidance via laser light cable (LLK); machine status light Cutting unit: protective glass with online monitoring; Dynamic Focus Control; automatic nozzle centering; adaptive lens system Functions/packages: AdjustLine, BrightLine Fiber, ControlLine, FastLine, FlyLine, FocusLine, NitroLine, PierceLine; fusion cut performance; high-speed package; copper & brass cutting packages Safety: CE marking; light barriers; enclosed protective housing; electrical rolling roof Dust extraction: compact / multi-chamber compact dust extractor (as configured) Connectivity: USB, RJ45 network; Central Link; Online Update Manager Pallet changer: automatic pallet changer in longitudinal direction Laser source: external solid-state laser TruDisk 12001 incl. Smart Beam Control Smart Nozzle Automation (nozzle changer + automatic nozzle inspection) Additional equipment: gas prefilters; wide transverse conveyor belt with tipping container (right side); cleaning brush; slag cart; dust extractor disposal units (2 x 30 L) Installation: mezzanine version (steel structure not included) Automation preparation: LiftMaster Compact preparation; LiftMaster Compact 1530 (AL34) available at additional cost Condition & availability Condition: used Available for collection: May 2026 (subject to decommissioning schedule). Viewing/cut test: by appointment (if still under power prior to removal). Commercial / logistics Ex-works (EXW). Buyer to arrange transport, machine will be decommissioned by authorised Trumpf engineers and loaded ono your transport. Export packing and documentation support can be provided if required. Enquiries Please contact for a full specification pack, serial details, hours (laser-on / control-on), service history, tooling/spares list, and video/cut sample requirements.

Condition: ready for operation (used), Year of construction: 2022, operating hours: 7,500 h, Metal 3D printer manufactured in 2022. This TRUMPF TruPrint 1000 multilaser features two 200W fiber lasers, providing multilaser productivity with 7,500 operating hours per laser. It is designed for high-precision dental and medical components, utilizing Bego Mediloy S-Co (Cobalt-Chrome alloy). Consider the opportunity to buy this TRUMPF TruPrint 1000 multilaser metal 3D printer. Contact us for further details. • Lasers: 2 x 200 W fiber lasers (multilaser) Gedpfjyifirjx Afnoin • Laser operating hours: 7,500 h per laser • Build volume: 100 mm diameter x 100 mm height • Material used: primarily BEGO Mediloy S-Co (Cobalt-Chrome) • Applications: high-precision dental and medical components • Condition: well-maintained; operated in a controlled laboratory environment • Handover: machine handed over at the laboratory gate

Condition: used, Year of construction: 2016, Trumpf Trulaser 5040 Type L69 Flat Bed Fiber Laser Cutting Machine, Sheet Size 4000 x 2000mm, Trudisk 800i (FD25) Fiber Laser, L4221N0240, Riedel PC501 Chiller, Trumpf Loadmaster. S/No. N0014A0345, Trumpf Campfil MF8.6 Dust Collector, Riedel L o/5 TR3.26B Chiller, Trumpf 05.21.00 Operating System, Laser Capacity 8000W, Working Range 4000 x 2000mm (X & Y), Z Axis 115mm (2016) Giedox T Dblspfx Afnsn Location: Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: good (used), functionality: fully functional, Year of construction: 2008, Electromechanical Press Brake Manufacturer: TRUMPF Model: TruBend 7018 Year: 2008 Technical Data Make: TRUMPF Model: TruBend 7018 Year of manufacture: 2008 Pressing force: 18 t Stroke: max. 150 mm Gijdpfx Afoyir Svjnen Bending length: 510 mm Frame gap: 422 mm Power supply: 5 kVA Space requirements: L 1295 x W 1320 x H 2380 mm Weight: approx. 1,800 kg Standard Equipment - Robust machine frame - Press beam - High-dynamic electronic direct drive (torque motor) - Inductive length measuring system with temperature compensation - Control cabinet air conditioning - Ergonomic machine design Special Equipment - Tool clamping system (Wila) top and bottom - Integrated TRUMPF TASC 6000 CNC control - Safety light curtain at the front - Backgauge system: 6 axes: X1, X2, R1, R2, Z1, Z2 - Comfort support table - BendGuard (with block laser) Safety - Side-mounted, pivoting safety doors - Two-pedal foot switch, for both standing and seated operation - CE certification Tooling Upper tool: straight punch R1/86°, H 120 mm, L 500 mm, segmented Lower tool: V-die V6/84°, R 0.6, H 100 mm, L 500 mm, segmented All information given without guarantee. Machine demonstration under power is possible at any time in our showroom.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 23,265 h, laser power: 5,000 W, This TRUMPF Trulaser 5030 Fiber was manufactured in 2013. It features a closed frame, torque drive, linear direct drive, and a TruDisk 3001 solid-state laser. Equipped with an automatic pallet changer, 17-inch touch screen, and integrated camera for process monitoring. Ideal for precise fiber laser cutting. If you are looking to get high-quality cutting capabilities consider the TRUMPF Trulaser 5030 machine we have for sale. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Trulaser 5030 (l56) documentation • Machine software • 1 additional postprocessor • Trutops laser programming course Extra Information General Data Machine: Closed machine frame Torque drive combined with linear direct drive Closed beam guidance via fiber optic cable (LCC) Machine cooling unit (water-air) Integrated control cabinets with interior lighting Automatic pallet changer in the longitudinal direction 17* touch color screen Wide longitudinal conveyor belt TruDisk power supply via the machine Work area lighting Positioning Laser Guides: Spray direction PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Coupler cutting package (includes cutting data) Brass cutting package (includes cutting data) Transport and assembly device TRUMPF Laser: TruDisk 3001 solid-state laser with one LLK output Fiber optic cable according to standard layout Gijdsx D Hg Aepfx Afnen Laser cooling unit (water-air) Excitation via Pump diodes Laser power control Subject to international export controls according to EC Dual-Use Regulation 428/2009 (lasers covered by 6A005) Cutting Head: Universal cutting unit with fully adaptive lens system Single-head cutting strategy Protective glass to protect against lens contamination ControlLine: Height control and outer sheet edge trimming Control: SINUMERIK 840D SL control system Simple and advanced workshop programming Fast re-production Integrated technology data Automatic shutdown Programmable cutting gas/pressure selection FastLine, FlyLine, AdjustLine Data Transfer: USB interface RJ-45 network connection Safety: CE marking Light barriers Multi-chamber extraction system Compact dust extraction system Machine enclosure, certified safety glass, door on the right Electric retractable roof Voltage and Frequency: Voltage: 400 V Frequency: 50 Hz Color: Standard white - blue RAL design 250 20 20 - blue NCS S 0505 RBOB - white Solid-state Laser: TruDisk 5001 with 1 air cooler outlet Additional Features: Nozzle changer BrightLine fiber DeteciLine: Precise sheet position detection Clamping clamps (2 pieces) Integrated camera (Full HD) for process monitoring with monitor interface Individual oil feed into the network ClitMaster Gompact retrofit capability

Condition: good (used), Year of construction: 2006, operating hours: 20,000 h, Trumpf Haas HL 4006D YAG Solid-State Laser The Trumpf Haas HL 4006D is a 4000W Nd:YAG solid-state laser designed for industrial applications such as welding highly reflective materials, especially for use with robots and with a range of up to 100 meters via flexible fiber optics. Areas of Application Welding: The main application is welding metal parts, especially highly reflective materials such as aluminum and copper, where other lasers are difficult to use. Automated Manufacturing: The laser is designed for integration into automated production lines with industrial robots. Precision Machining: The high power and precise beam quality enable precise work in industrial machining. Gisdpfxjxg Hpcs Afnjn Technical Specifications Manufacturer: Trumpf Haas Type: HL 4006D Nominal laser power: 4000 W Beam quality: 25 mm.mrad Laser light wavelength: 1064 nm Nominal voltage: 400 V Nominal power: 132 kW Nominal power consumption: 140 kVA Year of manufacture: Oct 2006 Weight: 1500 kg Operating hours: approx. 20,000 Dimensions (W x H x D): 3200 x 1700 x 1250 mm Laser optics including ILV scanner, pyrometer, and various spare parts Computer with WinLas software for parameter control You can find the right cooling unit and robot in our shop Rehsler TW HL4006D Cooling Unit Kuka KR 30/2 6-Axis Welding Robot Financing through our bank is also possible. komplett-konzept.leasingo.de Other items - new and Used - find it in our shop! International shipping costs on request!

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, control type: CNC control, controller manufacturer: Siemens, controller model: Sinumerik 840D, laser type: CO₂ laser, laser hours: 7,000 h, laser power: 4,000 W, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 750 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 80 m/min, feed rate Z-axis: 80 m/min, power: 4 kW (5.44 HP), Equipment: CE marking, cooling unit, dust extraction, fume extraction, ONLY 7,000 OPERATING HOURS – LASER UNIT! Special Equipment: - Automatic front-opening sliding door - Cabin lighting - Movable pendant control panel - FastLine Cell - 2D cutting tables with support rails & drawers Standard description: - Machine frame with Y-arm and integrated laser unit - Laser unit: CO2 laser TruFlow4000, high-frequency excited - Maintenance-free turbo radial blower - Mirror telescope - Cooling unit - Positioning laser diode - Laser power control - Logbook function - Drives: maintenance-free three-phase servomotors - Illumination under the Y-arm - Magnetic coupling for processing head Gjdoyidpqjpfx Afnsin - Head detection - AutoLasPlus - Pendant control panel - TFT color monitor - Teach panel - Network connection RJ 45 Processing Methods: - Laser cutting - Dynamic cutting head (155mm) - Cutting head (240mm) - PierceLine

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 7,583 h, control type: CNC control, controller manufacturer: Bosch-Rexroth, controller model: Rexroth IndraMotion MTX, laser type: diode laser, laser source manufacturer: TRUMPF, laser source model: TruDisk 3000, laser hours: 7,583 h, laser power: 3,000 W, punching force: 16 t, punching diameter: 76 mm, sheet thickness steel (max.): 6 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 60 m/min, overall weight: 13,200 kg, Equipment: CE marking, cooling unit, dust extraction, emergency stop, safety light barrier, Extended Station Equipment - Multitool function - MultiBend function - Thread forming function with thread counter Gisdpsyic Sdefx Afnen Thread former breakage monitoring Lubricant level monitoring - Marking/fast bead function - Engraving function - Deburring and rolling technology function Extended Machine Equipment - 1x additional hydraulic clamp Data Transmission - Wireless Operation Point - Mobile app control Standard Equipment: Machine - Enclosed machine frame - Hybrid axis system - Linear magazine with 20 slots for clamps and tools - Hydraulic clamps (3 pieces) - Drives with maintenance-free three-phase motors - Repositioning device with programmable hold-down - Foot pedal for closing clamps - Beam protection with direct access - Part chute right - Part flap left - Sensor for part flap - Work area lighting - FocusLine - Retrofit capability for SortMaster Compact - Protective tool - Transport and assembly device TRUMPF Laser - Laser light cable according to standard layout (10m) - Laser power control - Laser logbook function - Enclosed beam guidance via laser light cable (LLK) - Separate power supply for TruDisk Compact Cutting Unit - Solid-state laser compact cutting unit - Protective glass - Collision protection - ControlLine Punch Head - Delta Drive - Rotatable mono-tool holder - Programmable hold-down position - Tool length compensation - Spray lubrication for punches - Punch slug extraction - Forming function - Stroke counter for punches Control - TRUMPF control based on Rexroth IndraMotion MTX - Touch panel with 19'' TFT color display - Integrated technology data - Programmable cutting gas pressure - Remote support interface - Shutdown automation with wake-up function - Program management - Production plan Data Transmission - USB interface - RJ-45 network interface - Central Link - Online Update Manager Safety - CE marking - Two-beam safety light curtain Enhanced Standard Equipment - TruDisk 3001 solid-state laser with 1 LLK output - Cooling unit (water-air) - Compact extraction unit - 1st locating pin (inside right) - Ball tables - Good part container for part chute - Chip container for rear removal

Condition: ready for operation (used), Year of construction: 2012, operating hours: 33,318 h, controller manufacturer: TRUMPF, controller model: TASC 6000, number of axes: 5, overall weight: 8,300 kg, total width: 1,800 mm, total height: 2,840 mm, pressing force: 87 t, product length (max.): 3,020 mm, This 5s TRUMPF TruBend 5085 was manufactured in 2012. It features a press force of 850 kN and a bending length of 2,210 mm, making it suitable for various bending applications. With an operating interface of Touchpoint TruBend, it offers user-friendly operation. Consider the opportunity to buy this TRUMPF TruBend 5085 press brake. Contact us for further details. • Operating hours: Machine 33,318 h; Hydraulics 15,786 h • Clearance: 1,750 mm • Usable installation height: 385 mm (optional increased: 615 mm) • Throat depth: 420 mm • Operating interface: Touchpoint TruBend • Max. Y-axis speed (operating step, optional): 25 mm/s Technical Specification Bending Length 2210 mm Gedpoyhp Edjfx Afnoin