Used Cnc Vertical Lathe for sale (16,969)

Condition: good (used), Year of construction: 1999, turning diameter over cross slide: 365 mm, spindle bore: 62 mm, turning length: 2,000 mm, turning diameter: 570 mm, Swing over bed Ø: 570mm Swing over cross slide Ø:365mm DBC Turning Length: 2000mm Spindle bore: 62mm Spindle power: 25kW Tailstock spindle Ø: 100Ø Stroke pinole: 190mm Spindle taper: 4Mk Workpiece weight: 2500 Speeds / ranges: 2500Rpm Feed rate X-Axis: 5000mm/min. Tsdpsxxh N Usfx Ahuof Feed rate Z-Axis: 10000mm/min. Length: 5200mm Width: 2200mm Height: 2100mm Weight: 5200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2000, turning diameter 280 mm Tedpfx Ahexz Scqeuef turning length 960 mm control MORI SEIKI MSX -501 III weight of the machine ca. 13,5 t

Condition: excellent (used), Year of construction: 2010, swing diameter 1600 mm faceplate diameter 1400 mm Control Siemens Sinumerik 840D SL turning height 1245 mm max. table load 9000 kg table drive 60 kW torque - table 13400 Nm Table rpm 450 1/min speeds c-axis 0,004-5 1/min. feed range 18000 mm/min dimensions of the machine ca. 8,5 x 5,3 x 5,7 m weight of the machine ca. 47,4 t Crossbeam support: -Travel range X-axis: ± 950 mm Crossbeam stroke W-axis: 600 mm Ram : Tedpfxexylm Te Ahuof -Cross-section Ram: 250 x 250 mm -Plunging diameter: 340 mm -Travel Z-axis Ram: 1100 mm Drilling and milling device: - Distance between milling spindle and machine table 1245 mm - Tool holder SK 50 - Drive power 30 kW - Speed range 2000 rpm - Torque 1395 Nm Equipment/accessories: -16-40-fold pick-up magazine -Protective device -Various turning tool holders -Various SK50 tool holders and tools -Various clamping devices -Coolant device with filter -Chip conveyor -Documentation

Condition: used, Make: DISKUS-WERKE, Model: ModuLine DS 300 SO, Year of manufacture: 2013, Serial No.: 2219, Control unit manufacturer: Siemens, Model: Sinumerik 840D sl, 2 spindles, spindle distance: 210 mm, max. speed approx. 4000 rpm, W-axis tool spindle / grinding spindle: 2000 rpm, max. workpiece diameter: 100 mm, max. workpiece height: 40 mm, 8-position tool turret by Sauter, Model: 0.5.480.516, tool holder: Capto C5, workpiece automation device by DVS, Type: Moduline, transfer robot by Epson, PLC system control by Siemens, Simatic Panel Touch display, coolant system by Knoll, Type: KF150/950, paper band filter, chip conveyor by Knoll, Type: 225S-2/170. +++ Note: Machine is part of an online auction! +++ Todpfx Ahjx Ahg Ueusf

Condition: good (used), functionality: fully functional, Original CNC (not a retrofit from conventional to CNC) Control: Siemens 8-M Faceplate diameter: 3500 mm Max. turning diameter: 4000 mm Max. turning height: 2500 mm Vertical stroke of ram: 1600 mm Horizontal stroke of ram: 2200 mm Ram cross-section: 250 x 210 mm Min. internal diameter: 360 mm Vertical travel of cross-slide: 2000 mm/min Chuck motor power: 71 kW Chuck speed: up to 90 rpm (2-speed gearbox) Table load capacity: 40 tons Feed rate: 1000 mm/min Todpfx Ahsxyh Hvsujf Rapid traverse: 6000 mm/min

Condition: new, Year of construction: 2019, machine/vehicle number: G3171-0100, This machine is only available to customers in the United Kingdom & Republic of Ireland HEAVY DUTY 3-AXIS SLANT BED, EXTRA LENGTH CNC TURNING CENTRE WITH C-AXIS & DRIVEN TOOLS, HARDENED & GROUND BOX GUIDEWAYS, BMT65 TURRET & 10" STANDARD CHUCK SIZE MACHINE CAPACITIES Swing Over the Bed - Ø 750 MM Swing Over the Carriage - Ø 480 MM Tedpjhtq Abofx Ahusf Maximum Turning Diameter - Ø 410 MM Maximum Turning Length - 1,280 MM Bar Capacity - Ø 76 MM SPINDLE Chuck Size - Ø (10”) 254 MM Spindle Bore - Ø 95 MM Spindle Speed (Rpm) - 3,500 RPM Motor (Max / Cont.) - 22.0 / 18.5 KW Torque (Max / Cont.) - 493.2 / 414.7 NM Spindle Type - BELT Spindle Nose - A2-8 C-Axis Indexing - 360° (0.001°) FEED Travel X - 290 MM Travel Z - 1,350 MM Rapid Speed (X) - 20 M / MIN Rapid Speed (Z) - 24 M / MIN Slide Type - HARDENED & GROUND BOX GUIDEWAYS TURRET Number of Tools - 12 Tool Size (OD) - Ø 25 MM² Tool Size (ID) - Ø 50 MM² Indexing Time - 0.3 SEC / STEP LIVE TOOL Motor (Max / Cont.) - 5.5 / 3.7 KW Milling Tool Speed - 4,000 RPM Torque (Max / Cont.) - 35.0 / 23.5 NM Collet Size - Ø 20 – ER 32 Type - BMT65P TAILSTOCK Taper - MT 5 Quill Diameter - Ø 100 MM Quill Travel - 120 MM Travel - 750 MM TANK CAPACITY Coolant Tank - 270 L Lubricating Tank - 1.8 L POWER SUPPLY Electric Power Supply - 27 KVA Thickness of Power Cable - OVER 35 MM² Voltage 415 V / 50 HZ / 3PH MACHINE Floor Space (L x W) 4,171 X 2,002 MM Height 1,997 MM Weight 7,700 KGS FANUC 0IT CNC

Condition: good (used), Year of construction: 1994, functionality: fully functional, FOR SALE LATHE MORI SEIKI CL 15 CNC FANUC Todpjxv Aqzefx Ahuof

Condition: used, Year of construction: 2000, functionality: fully functional, CNC Lathe Mori Seiki ZT 2500 Y Year of manufacture: 10/2000 Control: MORI SEIKI MSX-501 III Simultaneous machining on 2 surfaces with 2 spindles and turrets. Double-sided machining Large number of tools included. For further technical details, see images. Tsdpfoxz Hnnjx Ahuof

Condition: used, Year of construction: 2009, swing diameter 2800 mm faceplate diameter 2200 mm control Siemens Sinumerik 840D turning height 2140 mm max. table load 17000 kg table drive 80 kW torque - table 44900 Nm Table rpm 280 1/min speeds c-axis 0,006-7,5 1/min feed range 18000 mm/min total power requirement 160 kW weight of the machine ca. 61,1 t dimensions of the machine ca. 11,4 x 6,53 x 6,6 m Crossbeam support: -Travel range X-axis: ± 1550 mm Crossbeam travel W-axis: 1200 mm Ram: -Cross-section: 300 x 250 mm -Plunging diameter: 380 mm -Travel range Z-axis: 1750 mm Drilling and milling equipment: - Distance between milling spindle and machine table - SK 50 tool holder - Drive power 30 kW - Speed range - 2000 rpm - Torque 1395 Nm Equipment/accessories: -24-72 times pick-up magazine Tjdexylmyopfx Ahuof -Protective device -Various turning tool holder -Various tool holders SK 50 with tools -Various clamping vices -Coolant device with filter -Chip conveyor -Documentation

Condition: used, Year of construction: 2006, functionality: fully functional, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Tedexz D Rgjpfx Ahuef Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600 4 driven axial tool holders 2 driven radial tool holders

Condition: used, Year of construction: 2011, turning length 1500 mm control SINUMERIK 828D centre height 270 mm greates pass round over bed 540 mm swing diameter over slide rest 310 mm bed width 350 mm max. workpiece weight 1500 kg spindle bore 85 mm turning speeds 27 - 2250 U/min main drive DC 11 kW MACHINE EQUIPMENT: - AME chip conveyor - Lynette - Heavy grey cast iron bed for optimum damping and reduced tool wear Todpoxyaf Rsfx Ahusf - Inductively hardened and parallel synchronised bed guides - Counter guides completely Turcite-coated and hand-scraped - Hardened and ground ball screws - Thermosymmetrical headstock - Main drive 11 kW - Infinitely variable speed range 27-2250 rpm with 3-stage gearbox

Condition: excellent (used), Year of construction: 2010, Used Hankook model 7NB x 4000 2 axis CNC lathe Year 2010, serial number 41L09117 Manufacturer Hankook Country of Origin South Korea Model Protec 7NB x 4000 mm Machine Type Description 2 Axis CNC flat bed turning Centre CNC Control Fanuc 21- iT with MG-i MACHINE CONSTRUCTION & FEATURES  Heavy Cast iron Construction  Heavy Duty Hardened & Ground Solid Slideways  Large Spindle Bore  Full Length Rear Chip Guard  Automatic Lubrication to All Critical Areas MACHINE CAPACITIES Swing Over Bed Ø 750 mm Swing Over Carriage Ø 480 mm Max. Turning Dia. Ø 750 mm Distance Between Centres 4,000 mm Load Capacity 3,000 Kg SPINDLE Spindle Bore Ø 176 mm Nose A2-11 Spindle Centre Taper MT #6 Spindle Speed 3 – 1,000 RPM Spindle Speed Range Manual 2 Step AUTOMATIC V8 TURRET Number of Tools 8 Holder Diameter Ø 60 mm Mechanism Electric FEEDS Rapid Traverse X 3 m/min Z 6 m/min Tsdev Rqftjpfx Ahuof Travel X 425 mm Z 2070 mm TAILSTOCK Taper/Diameter MT #6 Quill Diameter Ø 112 mm Max. Quill Travel 200 mm MOTORS Spindle 15/18 Kw X - Axis 1.2 Kw Z - Axis 3 Kw WEIGHT Weight 5,520 Kgs STANDARD MACHINE FEATURES • CNC System • Single Front Door • Coolant System • Foundation Bolts and Liners • Work Light • Work Light • Centre Sleeve MT #6 x Taper 1/10 • Tool Box • Centre MT #6 • Full Length Rear Guard • Live Centre MT #6 STANDARD FITTED MACHINE OPTIONS • Fanuc 21-iT • Transformer for 415V, 3Ph, 50Hz HANKOOK 7NB x 4000mm with Fanuc 21-iTB Modified guarding for long boring bars 20” Chuck Steady rest 50 - 250mm Steady rest 250 - 450mm Algra Automatic 8 station Turret Boring Bar attachment 100mm diameter 60mm diameter boring bar toolholder (1 off) Inch Metric conversion Custom Macro B Additional Block Skip G Code System B/C Programmable Data Input Actual Spindle Speed Output tool offsets 32 Pairs Extended Part Program Edit Manual Guide i External i/o device control External data Input High Skip ADDITIONAL ACCESSORIES INCLUDED • Special Revolving Centre (TBC) • Marposs TT30 Removable Tool setting Arm • Short LNS swarf conveyor and coolant / swarf trays • Sandvik damped/tuned boring bar of size 100mm dia x 1500mm length supplied with the boring attachment. • Filtermist filtration • Additional door guarding.

Condition: good (used), Year of construction: 1996, functionality: fully functional, For sale MORI SEIKI SL 15 lathe Tsdexv Anaepfx Ahuof CNC FANUC

Condition: used, Year of construction: 2018, operating hours: 2,900 h, functionality: fully functional, Perfect machine, for example, for the production of artillery shell housings according to NATO standards or ideal for industries like oil and gas, construction, aerospace and shipbuilding. Very good condition and immediately available. The machine has seen very little use and is in absolutely like-new condition. Tedpfxjxz Hbuj Ahuof 21" Doosan Puma 600L 3200 CNC lathe with steady rest (automatically adjustable steady rest) Year of manufacture: 2018 Including steady rest Machine operating hours: 2,036 hours Technical specifications: CNC control: Fanuc 32i-MA Max. turning diameter: 900 mm Max. turning length: 3,200 mm Chuck size: 21" Spindle bore: 152 mm Number of tool stations in turret: 12 X / Z travels: 940 mm / 3,200 mm All further information available on request. The machine can be demonstrated under power at any time on site.

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Tedpfxow Nklho Ahujf Weight 4200 kg Good condition

Condition: used, Type of machine: CNC lathe Manufacturer: WEILER Model: Orion PD 180 CNC #10 Control: Sinumerik 810 T Siemens Location: D-59302 Oelde Country of origin: Germany Additional information: CNC lathe WEILER - Orion PD 180 CNC Maximum turning diameter: 80 mm Maximum turning length: 180 mm Control: Sinumerik 810 T Siemens Maximum swing diameter over bed cover: 190 mm Swing diameter over cross slide: 80 mm Distance spindle center to floor: 1,015 mm Main spindle: Speed range - main spindle: 50 - 8,000 rpm Todexzi E Aspfx Ahusf Drive power - main spindle: 5.5 kW Spindle bore: 36 mm Maximum bar capacity: 24 mm Chuck diameter: 110 mm Spindle nose: DIN 55036 MK 4 Tool turret: Number of tool positions: 8 positions Shank diameter: VDI 3425 / 20 mm

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 110521, turning diameter over cross slide: 300 mm, spindle bore: 105 mm, rotational speed (max.): 2,500 rpm, total height: 1,760 mm, total length: 3,700 mm, total width: 2,230 mm, quill diameter: 90 mm, quill stroke: 150 mm, feed rate X-axis: 5 m/min, feed rate Z-axis: 3 m/min, overall weight: 5,300 kg, center width: 3,000 mm, center height: 315 mm, FAT 630MN x 3000 mm Lathe – Available as is or refurbished Are you looking for a high-performance and robust lathe for your machining operations? This FAT 630MN x 3 meters, manufactured in 2011, is an opportunity not to be missed. Included with the machine: ✔ Trident for optimal holding of long parts ✔ Independent 4-jaw tables ✔ Complete documentation and user manual Available in two options: Tedpfx Ajv Rqw Aohuof - As is: Machine functional and immediately available – €29,850 excluding VAT - Fully refurbished and repainted: Refurbished for optimal reliability – €48,500 excluding VAT Contact us for more information or to arrange a visit! 🔹 LMIR – Your partner in industrial machine tools 🔹

Condition: new, The KNUTH Roturn 400 M is a highly advanced CNC Slant Bed Lathe positioned within the 2-axis CNC Lathes group. This machine combines modern technology with robust design, featuring a rigid inclined-bed configuration that enhances stability and chip removal efficiency. Equipped with the Siemens 828 D Basic control, it meets comprehensive control technology requirements, providing you with precision performance. The Roturn 400 M includes a hydraulic 3-jaw chuck, a 12-station tool turret with driven tools for versatile applications, and precise linear guides for high accuracy even under heavy loads. Additionally, the machine boasts an automatic central lubrication system, including a hinged belt conveyor and a powerful coolant system to ensure optimal operation. The spacious enclosed workspace is easily accessible, designed for user convenience and safety. If you're looking for a reliable CNC Slant Bed Lathe, request a quote for the Roturn 400 M today to elevate your machining capabilities in the lathe category. Tsdpfx Ahjxhfugousf

Condition: used, Year of construction: 1996, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Geminis Lathe Type: CNC5/PLUS/1000/4000 CNC control: Fagor Year: 1996 With 2 steadies + Tooling With 2 chucks Can be inspected under power Tsdpfx Ahoxvr E Ieuef Video available

Condition: used, Year of construction: 2010, turning diameter 370 mm turning length 424 mm control Fanuc Tjdpfexzk Rtex Ahujf

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) Todetrhq Hepfx Ahusf - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 990570, turning diameter over cross slide: 370 mm, turning diameter: 630 mm, spindle bore: 105 mm, travel distance X-axis: 390 mm, travel distance Z-axis: 3,000 mm, spindle motor power: 18,500 W, rapid traverse X-axis: 8 m/min, rapid traverse Z-axis: 8 m/min, total height: 1,760 mm, total length: 4,000 mm, total width: 2,300 mm, feed length X-axis: 390 mm, feed length Z-axis: 3,000 mm, quill diameter: 100 mm, quill stroke: 200 mm, workpiece weight (max.): 2,000 kg, torque: 2,100 Nm, overall weight: 4,100 kg, spindle nose: D1-8, Equipment: documentation/manual, FAT TUR MN 630 x 3000 Lathe – Ready for Use Tjdpfxev Rrluj Ahuof We are offering for sale a FAT TUR MN 630 x 3000 CNC lathe, fully overhauled and repainted, ready for production use. This robust and precise machine is equipped with a Siemens Sinumerik numerical control, guaranteeing excellent performance for machining large parts. Information: ✅ Machine in excellent condition ✅ 3-jaw chuck included ✅ Steady rest and tool set provided ✅ Complete documentation and backup of operating instructions Work performed: ✔ Complete overhaul: mechanical, hydraulic, and electrical ✔ Complete repainting ✔ Inspections and tests before commissioning Viewable in our workshop - Contact us for more information (machine details, delivery options, etc.) The price indicated is for delivery loaded on a truck. 🔹 LMIR – Your partner in industrial machine tools 🔹

Condition: new, The LabCenter 260 CNC is a robust and compact Vertical Machining Center designed specifically for CNC training and the production of small workpieces. This innovative machine offers the full functionality of larger production machines while being mobile and professional, making it ideal for laboratories and training environments. Equipped with the SIEMENS 808D Advance control, the LabCenter facilitates an intuitive introduction to CNC applications. It boasts a continuously variable main spindle speed of up to 5000 revolutions per minute and features precisely machined cast iron frames, durable dovetail guides, and preloaded ball screws with servo drives on all axes. With a maximum travel of 160 mm on the X-axis and a table size of 400x145 mm, this C-Frame Vertical CNC Center enhances productivity with its efficient 4-station tool changer and mobile base, which allows for convenient tool and material storage. Ensure seamless operation with the included electronic hand-wheel, central lubrication, and comprehensive operating manual. KNUTH guarantees quality and precision in all aspects. To experience the benefits of this Vertical Machining Center, order online today. Todpouy Ihhjfx Ahusf

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 000554, turning diameter over cross slide: 300 mm, turning diameter: 560 mm, spindle speed (max.): 2,500 rpm, spindle motor power: 18,500 W, total length: 3,700 mm, total width: 2,230 mm, quill diameter: 90 mm, quill stroke: 150 mm, feed rate X-axis: 5 m/min, feed rate Z-axis: 3 m/min, overall weight: 4,800 kg, spindle nose: D1-8", Equipment: documentation/manual, FAT 560 MN x 2000 CNC Lathe – Overhauled and Repainted We offer a FAT 560 MN x 2000 lathe, equipped with a Siemens 810D CNC control, completely overhauled and repainted by us. Todpforr Ui Uox Ahujf Information: ✅ Machine in excellent condition, fully functional ✅ Complete documentation provided ✅ 3-jaw chuck, steady rest, and tooling included Work performed: ✔ Complete overhaul: mechanical, hydraulic, and electrical ✔ Complete repainting ✔ Inspections and tests before commissioning Machine available for viewing in our workshops – Contact us for more information! (machine details, delivery options, etc.) 🔹 LMIR – Your partner in industrial machine tools 🔹

Condition: new, The LabTurn 2028 CNC, part of the CNC Slant Bed Lathes category and 2-axis CNC Lathes group, is designed for both CNC training and the efficient production of small workpieces. This compact and mobile lathe combines the functionality of larger production machines with a robust cast-iron inclined bed design, ensuring excellent stability for precise machining. The machine features an 8-station tool turret with four tools each for inside and outside turning and a max spindle speed of 3000 rpm, enabling versatility in various applications. Additionally, the Siemens 808D Advance controller provides an intuitive interface for beginners. The LabTurn includes a 100 mm 3-jaw chuck, hydraulic tailstock, and a well-structured design with an enclosed workspace for safety. Enhance your machining capabilities with the LabTurn and experience the potential for high precision and performance. Request a quote today to explore this superior CNC Slant Bed Lathe. Tjdpfxeuy Iclj Ahuof