Used Busch Mm 1322 Av for sale (128)

Condition: excellent (used), Year of construction: 2008, We have 3 pieces in stock Year of production: 2008 Ultimate vacuum (P_abs): 100 hPa (mbar) Nominal capacity: 250 m³/h Bledpfx Aezhv Azja Ion

Year of construction: 2010, condition: used, Claw vacuum pump Dry-running Manufacturer: Busch Bedpfx Aaedkaf Uo Ioln Type: Mink MM 1322 AV Motor: DS 400V Suction capacity: 300 m³/h Ultimate pressure: approx. 150 mbar (abs.) Warranty: 12 months Condition: Like new Accessories: Suction filter; operating manual Delivery time: short notice

Condition: used, Year of construction: 2008, There are two identical pumps available, nominal suction capacity: 245m³/h, ultimate pressure: 100hPa, ultimate pressure (continuous operation): 200hPa, rated motor power: 5.5kW, rated motor speed: 3000/min, sound pressure level (ISO 3744), 1m distance, at medium load: 75dB(A), oil fill: 1l, gas inlet: G2, gas outlet: R1, length: 1050mm, width: 515mm, height: 450mm, weight: 240kg. Blodpez Da Nhjfx Aa Ien

Condition: good (used), Year of construction: 2010, Ref. no.: 18637 Manufacturer: BUSCH Type: MM 1252 AV (15 Stück) Year of construction: 2010 Further information: Make | Model | Year | Capacity | Frequency | Bljdpfx Asy Tlcwja Ion Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2009 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2010 | 250/300 m³/h | 50/60 Hz | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz | Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz | Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | BUSCH MINK MM 1252 AV VACUUM PUMPS A total of 15 units Busch Mink MM 1252 AV industrial vacuum pumps are available for sale. The pumps were removed from a running production line and are generally in clean and good cosmetic condition. These high-quality Busch MINK series pumps are widely used in plastics injection molding, central vacuum systems, packaging and automation applications. TECHNICAL SPECIFICATIONS • Manufacturer: Busch • Model: MINK MM 1252 AV • Technology: Dry Claw / Oil-Free Vacuum Technology • Capacity: 250 – 300 m³/h • Final Vacuum: 100 hPa (0.1 bar) • Frequency: 50/60 Hz • Year of Manufacture: 2009 / 2010 • Origin: Germany MAIN ADVANTAGES • Oil-free operating system • Low maintenance costs • Energy-efficient operation • Quiet and reliable performance • Suitable for continuous industrial operation • High Busch quality with worldwide service support APPLICATION AREAS • Plastic injection molding machines • Central vacuum systems • Packaging machines • Thermoforming systems • Automation and conveying systems • Industrial production facilities

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 240 kg, total length: 1,010 mm, total width: 515 mm, total height: 450 mm, volume flow: 250 m³/h, final pressure: 100 bar, input voltage: 400 V, input frequency: 50 Hz, input current: 11 A, type of input current: three-phase, type of cooling: air, rotational speed (max.): 3,000 rpm, warranty duration: 12 months, BUSCH MINK MM 1252 AV — Industrial Vacuum Pump Dry claw | 250 m³/h | 100 mbar Why choose it? Contactless cam technology: no internal wear, no oil, no vane replacement. Performance remains consistent throughout the machine's entire service life – from day one to the last. Energy efficiency up to 60% compared to equivalent conventional pumps. ✅ Key Features Completely dry operation – zero operating fluids, zero oil disposal costs High-efficiency IE2/IE3 direct drive motor Low noise level thanks to the integrated silencer Check valve and intake filter with cartridge included as standard ✅ Applications CNC, pneumatic conveying, plastics processing, packaging, industrial processes with continuous 24/7 vacuum. Blsdszfgcgepfx Aa Ien ✔ Original Busch unit (world leader in industrial vacuum) ✔ Ready for delivery · Warranty included ✔ Install & Forget — install it and forget it

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 070068681, Hz: 50/60 V250/300 m3/h Bodpfeyqyb Isx Aa Isln P 100 hPa (0.1 bar)

Condition: excellent (used), Year of construction: 2002, 62 m³/h 60 hPa (mbar) Bodpsyqydiefx Aa Ioln 1,5 kW

Condition: used, Year of construction: 2013, Claw Vacuum Pump Dry Manufacturer: Busch Type: Mink MM 1502 AV V8 Motor: DS 400V Suction capacity: 500/580 m³/h Ultimate pressure: approx. 200 mbar (abs.) Bsdpfx Asv I Agdoa Ioln Accessories: Intake filter; Operating instructions Delivery time: Short term

Condition: excellent (used), Year of construction: 2002, machine/vehicle number: 02022348, 50 Hz 140 m³/h Bedpfx Aaey H Iaro Isln 60 hPa

Year of construction: 2013, condition: used, Claw vacuum pump Dry-running Bodpjcfw Tnofx Aa Isln Manufacturer: Busch Type: Mink MM 1252 AV Motor: DS 400V Suction capacity: 250/300 m³/h Final pressure: approx. 100 mbar (abs.) Accessories: Suction filter; Operating manual Delivery time: short-term

Condition: excellent (used), functionality: fully functional, overall weight: 175 kg, volume flow: 80 m³/h, final pressure: 0.06 bar, input voltage: 400 V, rotational speed (max.): 1,500 rpm, Busch Mink MM 1144B V03 Vacuum Pump Blsdpfx Aajz Hbqxe Isn 2 pumps available with very little work done each. Pumps were purchased and installed for a project that was never commissioned. Selling on behalf of our customer.

Condition: new, Year of construction: 2025, Efficient Substantial energy savings compared to conventional vacuum generators, minimized operating costs Nearly maintenance-free Blsdpfx Astu H Eioa Isn Dry and contact-free operation Nominal pumping speed 245 / 290 m³/h (50 / 60 Hz) Ultimate pressure 100 hPa (mbar) (50 / 60 Hz) Ultimate pressure (continuous operation) 200 hPa (mbar) (50 / 60 Hz) Nominal motor rating 5.1 / 6.8 kW (50 / 60 Hz) Nominal motor speed 3000 / 3600 min⁻¹ (50 / 60 Hz) Noise level (ISO 2151) 75 / 79 dB(A) (50 / 60 Hz) Weight approx. 240 / 290 kg (50 / 60 Hz) Dimensions (L x W x H) 1090 x 515 x 450 mm (50 / 60 Hz) 1065 x 515 x 450 mm (50 / 60 Hz) Gas inlet / outlet G 2" / R 1"

Condition: excellent (used), Year of construction: 2015, BUSCH Used Vacuum pump with control and pressure tank Year of manufacture 2015 Nominal suction capacity 160 m³/h Ultimate pressure 60 hPa (mbar) motor nominal power 4,0 kW Nominal motor speed 1500 min-¹ Noise level (ISO 2151) 70 dB(A) Oil quantity 1 l Weight approx. 240 kg Dimensions (L x W x H) 1040 x 515 x 450 mm Gas inlet G 2" Gas outlet R 1" Bledpfx Aaepch D Tj Ion Two more pumps can be connected to the control unit Pressure vessel from K+B Year of construction 2004 Horizontal 1000L capacity max. allowed temperature 50°C max. allowed pressure -1/0 bar

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Busch MM 1142 B VS3 Vacuum Pump Manufacturer: Busch Vacuum Solutions Model: MM 1142 B VS3 Serial Number: D15242694 Year of Manufacture: 2015 Capacity: 140 m³/h Weight: 175 kg Dimensions: 1000 mm × 400 mm × 700 mm Pump Type: Dry claw vacuum pump The Busch MM 1142 B VS3 vacuum pump is a modern, oil-free “dry claw” pump designed for efficient and clean generation of vacuum in industrial applications. Its oil-free compression chamber design eliminates the risk of process contamination, making this pump ideal for industries requiring high process purity. The unit features quiet operation, low operating costs, and high reliability. Its compact design makes integration into production lines and central vacuum systems easy. Bledpfjxvi Aqox Aa Ien Applications: - Food and packaging industry - Production lines and automatic vacuum systems - Plastics processing, foundry work, printing - Laboratories and central vacuum systems

Condition: good (used), Busch Vacuum Pump Type: 400-212 235 CFM Bledpfxswa Ucgj Aa Isn Dimensions: 1300 mm x 800 mm x 1100 mm.

Condition: used, Year of construction: 2018, machine/vehicle number: D18451643, used vacuum pump Busch MM 1104 BP O2 for sale, YOM: 2018 Manufacturer: Busch, Vacuum Pumps and Systems Model: Mink MM 1104 BP O2 S/N: D18451643 MFG: 2018 New air filter Nominal pumping speed: 62 m³/h Ultimate pressure: 60 hPa (mbar) Nominal motor speed: 1800 min-1 Noise level (ISO 2151): 71 dB(A) Weight approx.: 155 kg Dimensions (L x W x H): 1080 x 430 x 590 mm Gas inlet / outlet: G 1 ¼" / G 1" (NPT) Max pressure: 1,2 - 2.0 bar (17-29 psi) Motor: 2.2 – 3.2 kW (3.0 HP), 3-phase, 230/460 V, 60 Hz Lubrification: dry/oil-free Cooling: air-cooled Description: The Busch Mink MM 1104 BP O2 is a specialized, industrial-grade dry claw compressor and vacuum pump. The "BP" designation stands for overpressure/pressure variants, while the "O2" specification denotes it is configured specifically for handling oxygen-enriched gases. 1. The Rotary Claw Pumping Principle The core of the pump consists of two claw-shaped rotors mounted on parallel shafts inside a synchronized pumping chamber. Synchronized Counter-Rotation: The rotors turn in opposite directions. Their movement is precisely synchronized by a timing gear drive located in a separate, sealed gear housing. Contactless Operation: As the claws rotate, they pass incredibly close to each other and the interior cylinder wall, maintaining tight tolerances measured in fractions of a millimetre. However, they never actually touch. Internal Compression: As the claws roll past the inlet port, gas is drawn into the expanding chamber. As rotation continues, the volume between the claws is trapped, compressed mechanically by the geometric shape of the rotors, and then forced out through the discharge port. Because there is zero friction or mechanical wear inside the pumping chamber, the pump requires no internal lubrication. This yields an entirely oil-free exhaust gas stream. 2. Engineering Architecture: The "BP" Designation The BP (Back Pressure / Overpressure) variant modifies the internal geometry and sealing profile of the standard Mink platform. Dual-Function Flexibility: While traditional vacuum pumps exhaust directly to atmospheric pressure, BP variants are built with heavy-duty casings and specialized shaft seals. This allows them to operate as both low-pressure compressors and high-differential vacuum pumps. Variable Pressure Handling: They can safely discharge gas into a pressurized manifold system (up to standard rated overpressures, usually around 2.0 to 2.5 bar absolute) without suffering from seal failure or overheating. 3. Materials & Thermodynamics of the "O2" Variant Pumping high-purity or enriched oxygen (O₂ > 21%) presents severe thermal and chemical hazards. Standard industrial pumps will trigger a catastrophic flash fire if compressed oxygen reacts with hydrocarbon lubricants or friction points. The O2 variant incorporates specific thermodynamic and chemical isolation measures: Gearbox Lubricant: PFPE (Perfluoropolyether) synthetic fluid. It is chemically inert and completely non-reactive with pure oxygen. Price: 3.290 Euro + VAT, negotiable, FCA: Oradea/Romania Bljdpfx Aszz Tm Rja Isn Irrtum, Änderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: ready for operation (used), Year of construction: 1986, Available immediately from our location: Fully automatic milling machine, Busch Type NF 8/32 Year of manufacture 1986 Groove width up to 32 mm Processing length up to 6100 mm Automatic material feed Automatic feed Drive power 5.5 kW Accessories: Support table Clamping devices, milling cutters Coolant system Digital display Weight 4 tons Price: EUR 2,500.00 plus VAT, ex works Blodpsz Huzwjfx Aa Ijn

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, BUSCH HL 110 (Pile Lift) Year: 2021 # Max. load: 1000 kg Bjdpey Iuabsfx Aa Ieln Platform E size: 780 x 1100 mm # Max. stroke: 900 mm In excellent working condition # Location: Krefeld, Germany

Year of construction: 2013, condition: used, Manufacturer: Busch Type: Mink MM 1142 BV Motor: DS 400V Suction capacity: 140 m³/h Final pressure: approx. 60 mbar (absolute) Accessories: Intake filter; Operating manual Bsdecfw Ukepfx Aa Isln Delivery time: short notice

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, BuschGraph Busch SE 90 stack turner, for turning only (without ventilation system) with fixed control panel Max. sheet size: 600 x 750 mm Bedpszpa Uqofx Aa Isln Max. stack height: 1200 mm Min. stack height: 290 mm Platform width: 900 mm Platform depth: 620 mm Load capacity: 500 kg

Condition: used, Year of construction: 2020, Pile turner Busch SWH 90 RLA Year: 2020 Description: Blsdpfjuv Hulex Aa Ien - Airing - Vibrating - Aligning Max. size: 600 x 750 mm

Condition: reconditioned (used), Year of construction: 2015, Refurbished BUSCH SECO SV 1040 C 000 INXX 1.25 kW motor P max = 120 hPa (mbar) Blsdpjw Sm A Isfx Aa Isn V max = 40 m3/h Weight approx. 40 kg

Year of construction: 2009, condition: refurbished (used), functionality: fully functional, 1 liquid ring vacuum pump. Please read the description carefully from beginning to end! The pump is not suitable for: Water, the food industry, and non-corrosive media. For these media, more cost-effective materials such as 1.4408 or 1.4571 are better suited. Caution! The pump does not have explosion-proof certificates. It is also not possible to replace the motor, as it is a special long-shaft motor. The mechanical seal also does not have EX certificates! The pump is made of the special Alloy 59 material! This alloy is used when conventional chrome-nickel steels are no longer sufficient in terms of corrosion resistance. Especially when chloride-induced pitting and crevice corrosion and stress corrosion cracking are a problem. Alloy 59 is used for: environmental technology, the chemical industry (chemical processes with oxidizing and reducing acids, resistance to wet chlorine gas), and waste incineration plants. Primarily, 2.4605 is used in the chemical industry, the pulp and paper industry, and in flue gas desulfurization plants. Excellent resistance to mineral acids such as nitric acid, phosphoric acid, sulfuric acid, and hydrochloric acid, and especially to sulfuric acid/hydrochloric acid mixtures. Typical applications are: -Equipment components for processes in organic chemistry with chloride-containing media, especially when catalysts based on chlorides are used. -Multipurpose plants in the chemical industry -Plant parts in the fine chemical and pharmaceutical industries -Scrubbers, heat exchangers, flaps, fans, and agitators for flue gas desulfurization plants (FGD) in fossil-fired power plants and waste incineration plants -SO2 scrubbers for ship diesel engines -Components for seawater and concentrated brines -Equipment and components for geothermal and sour gas applications -Reactors for acetic acid and acetic anhydride -Reactors for hydrofluoric acid -Sulfuric acid coolers -Piping in geothermal power plants -Components in flue gas desulfurization plants Manufacturer: Busch Type: LC 0220 A ZZO XX ZZ Volume flow: 195 m³/h Motor power: 7.5 kW Voltage: 400/690 volts Speed: 1440 rpm Vacuum: 33 mbar Material: 2.4605 (Alloy 59) NiCr23Mo16Al All ball bearings are new, and the mechanical seal has been refurbished by a specialist company. Weight: 121 kg Dimensions: Length 960 mm, Width 370 mm, Height 370 mm Bjdpfxjigquts Aa Isln Connection: DN 50 (2")

Condition: used, Year of construction: 1999, This Busch SWH 125, manufactured in 1999, is a robust and reliable stacking unit currently located in Germany and actively in use within a printshop environment. With a solid build and dimensions of 800 x 1200 mm, it offers dependable performance for industrial stacking operations. Bedpfx Asxpw Etea Ioln The unit is in good condition, showing no signs of damage, and is designed to accommodate a wide range of stacking needs. It features a generous platform width of 1250 mm, allowing for efficient handling of various materials. The stacking height is adjustable, with a maximum of 1350 mm and a minimum of 650 mm, providing flexibility for different production requirements. This machine, bearing serial number 409/851, reflects Busch???s commitment to engineering excellence and durability. It remains a practical choice for operations seeking consistent stacking performance in a professional setting. Format: 800 x 1200 mm Equipment: Good condition without any damage Maximum stacking height: 1350 mm Minimum stacking height: 650 mm Platform width: 1250 mm

Condition: used, Bore measuring screws, internal measuring screw from the manufacturer Busch D.B.P.a. Ausl.PAT. 3-point internal micrometer - bore micrometer, used with wooden case – Friedr. Strack Wuppertal Measuring range [mm] 25-30 / 30-40 Blsdpfxezumc Sj Aa Ijn Scale value [mm] 0.005 Testing equipment – internal measuring device – with 3-line contact 2 pieces available Price negotiable Our asking price per piece is €84.00 net, ex works, plus packaging costs. All technical specifications are subject to typographical errors and inaccuracies. Sale exclusively to countries within the EU.