Used Cnc Flatbed Lathe for sale (13,881)

Condition: used, Year of construction: 2002, functionality: fully functional, Equipment: documentation/manual, CMZ Turning Center 2 Axes: X, Z Model: TBI-520 Bwsdpfxjzqbkce Ap Iow CNC: Fanuc Year: 2002 Without Tailstock

Condition: good (used), Year of construction: 2014, 900mm Swing, 650mm max. machining diameter, Bjdez D Axfjpfx Ap Ieww 992 mm maximum turning length, 1000rpm spindle, Spindle bore 275mm, 10 station turret 45kW spindle motor, FANUC Series 32i control, 24” 3 Jaw manual Chuck, Tailstock, Swarf Conveyor, Coolant,

Condition: used, Year of construction: 2011, turning diameter 330 mm turning length 669 mm Bwsdpfx Ao Ahklqop Isw control Siemens 828D

Condition: ready for operation (used), functionality: fully functional, Manufacturer: Okuma Type: FUB-P4R2 Version 2.0 Bwedpfx As Ahhngsp Ijw Article number: 1911-2242 Opus 7000 Condition: Used, but in good condition and fully functional.

Condition: excellent (used), Year of construction: 2022, 400mm swing, 220mm max diameter, 510mm cutting length, Siemens 828 Control, Bedpfsz Hatfsx Ap Isww 65mm bar capacity, 12 station turret, 17kW Spindle Motor, Spindle Speed 4000rpm, 3 jaw chuck, low volt light, coolant, Tool setter, swarf conveyor

Year of construction: 2019, condition: excellent (used), travel distance X-axis: 239 mm, travel distance Y-axis: 51 mm, travel distance Z-axis: 826 mm, bar passage: 76 mm, spindle speed (max.): 3,400 rpm, CNC lathe Manufacturer: Haas Model: ST-30Y Year of manufacture: 2019 Control: Haas Technical Data: Max. swing diameter: 533 mm Max. machining diameter (with BMT 65): 349 mm Distance between centers: 826 mm Bar capacity: max. 76 mm Travel distances: X-axis travel: 239 mm Y-axis travel: +/- 51 mm Z-axis travel: 826 mm Main spindle: Spindle speed: 3,400 rpm Drive power: 22.4 kW Turret: Number of tool stations: 12 positions Tool holder: BMT 65 Bodpj Agrmuefx Ap Ioww Rapid traverse rates: Rapid traverse (x, y, z): 12 / 12 / 24 m/min Technical features & accessories: - Driven tools (C-axis) - Automatic tool presetting arm - Coolant tank - Coolant pump - Chip conveyor - 254 mm chuck - Tailstock Accessories, depicted tools, and clamping devices are only included in the scope of delivery if specified in the additional information.

Condition: excellent (used), Year of construction: 2020, swing 700mm, maximum turning diameter 480mm, bar capacity 80mm, Bodpfx Aez Ebmwsp Ieww maximum turning length 1240mm, spindle speed 3,250 rpm, , 12 station turret, spindle power 25.5Kw, siemens 840D Slimline control, tool setter, coolant, Swarf Conveyor.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, In excellent condition, fully functional. Bwsdpfo Afi Ebox Ap Isw

Condition: used, Year of construction: 2011, Manufacturer: DMG GILDEMEISTER, Type: NEV 400, Year of manufacture: 2011, Operating hours: 39,722, Spindle hours: 12,928, Control system, Manufacturer: Siemens, Type: Sinumerik 840D, 21" operator terminal ERGOline, Touchscreen, 3-jaw chuck, Tool turret, 12 tool positions, Center distance 805 mm, Turning length 650 mm, Travel X/Z/Z 255 x 800 x 680 mm, Chip conveyor +++ ATTENTION! This machine is part of an online auction! +++ Bodpfsz Tlfzex Ap Isww

Condition: used, CNC turning machine TRAUB, Type TND 400 Serial No. 708, Year of manufacture 1996 CNC control TRAUB TX 8 F Nominal turning diameter: 400 mm Swinging diameter over bed: max. 470 mm Spindle bore in draw tube: 65 mm Motor power, spindle drive: 22 kW Total power consumption: 35 kW Mains connection: 380 volts, 50 Hz - Electronic handwheel - RS 232 data interface - Turret with 12 tool positions, VDI 40 - Includes 8 tool holders, VDI 40 - 3-jaw chuck, Ø 225 mm, SMW Autoblok, Type KNCS-N-Ø 225-65 Bwedpfx Aozacwdop Isw Includes a large quantity of chuck jaws - Hydraulic internal expanding cylinder, SMW, Type ZHDAS-130-67 - Chip conveyor, KNOLL, Type 200 S-1/600 - Coolant system - Hydraulic unit (L x W x H 650 x 500 x 1000 mm) Space requirement L x W x H: 4800 x 2000 x 2100 mm Space requirement, base machine L x W x H: 3500 x 2000 x 2100 mm Space requirement, chip conveyor L x W x H: 4500 x 700 x 1550 mm Weight: approx. 5 tons Good condition Machine is ready for demonstration. The internal expanding cylinder for workpiece clamping needs to be repaired.

Condition: excellent (used), Year of construction: 2012, 2x INDEX V300 vertical CNC lathe Bwsdpfx Aj Aggb Ujp Iew Power: 87 kW Year: 2012 1 tool turret with 10 positions CNC: SIEMENS SINUMERIK 840D sl with parts conveyor Approximately 19 tool holders, including powered tool holders and 10-tool displays Chip conveyor Tilting and forklift-compatible chip bin, GOUBARD

Condition: good (used), Year of construction: 2011, workpiece weight (max.): 20 kg, turning diameter: 250 mm, torque: 256 Nm, power: 45 kW (61.18 HP), CNC vertical turning lathe Manufacturer: EMAG Type: VTC 250 Bedpfx Apj Agr Dye Ijww Year of manufacture: 2011 / 2012 Control: Siemens 840D sl Technical data: Max. turning diameter: 250 mm Max. turning length: 630 / 730 mm Max. swing diameter: 140 / 260 mm Main spindle: Max. speed: 3,500 / 4,000 rpm Max. torque: 256 Nm Spindle bore: 50 / 52 mm Chuck diameter: 250 mm Tool turret: Number of turrets: 2 Max. tool weight: 10 kg Max. tool length: 90 mm Max. workpiece weight: 20 kg Feeds: Rapid traverse (x / z): 40 / 30 m/min Total power requirement: 45 kW Machine weight: approx. 14 / 16 tons There are 2 units manufactured in 2011 and 1 unit manufactured in 2012 available. Technical features & accessories: - Year of manufacture 2011: Number of bed and cross slides: 2 - Year of manufacture 2012: Number of bed and cross slides: 1 - Tool monitoring - Protective guard - Collision monitoring - In-process quality control - Central coolant supply (not included) - Chip conveyor Price per machine. Accessories, tools and clamping devices shown in the pictures are only included in the scope of delivery if this is noted in the additional information.

Condition: used, Year of construction: 1995, machine/vehicle number: .04503009, with CNC control, manufactured by OKUMA, type: OSP 7000 L, max. turning length: 1000 mm, max. turning diameter: 250 mm, with tool turret with 12 tool positions, all 12 tool positions suitable for driven tools, with filter system and chip conveyor. Bsdpfoz Nhrvex Ap Isww

Condition: ready for operation (used), Year of construction: 1989, turning diameter over cross slide: 340 mm, turning length: 560 mm, turning diameter: 560 mm, spindle bore: 63 mm, overall weight: 5,500 kg, Fanuc OT Bjdpfx Apozbam Ej Ieww Length capacity: 560 mm Diameter over slide: 340 mm, turning diameter: 560 mm Turret: 10 stations Spindle: 11 kW Chip conveyor

Condition: good (used), Year of construction: 2005, functionality: fully functional, FOR SALE CNC Lathe Mori Seiki NL2500Y/700 (year 2005) currently available for sale. Sales Notice: CNC Lathe with Y & C axes Mori Seiki NL2500Y/700 (2005) Original Japanese machine (August 2005), rigid, high-performing, and in good overall condition for your precision machining work. Bodpfx Ape Af A Aye Ijww Main features: - Axes: Y axis (±50 mm) + C axis (high-precision spindle indexing) - Capabilities: Maximum turning diameter: 356 mm | Maximum turning length: 705 mm - Main spindle: Maximum speed 4,000 rpm | Spindle nose A2-8 | 26 kW motor - Turret: 12 tool positions - Numerical control: FANUC CNC - Actual readings: Power-on time: 31,946 hours | Cutting time: 24,441 hours Included equipment: - Lateral chip conveyor - Tailstock with rotating center - 4 single external chairs for the turret (Machine sold without a chip extraction system)

Condition: used, Year of construction: 2023, CNC Lathe Manufacturer: SMEC Model: SL 2000 SY Year of manufacture: 2023 Control system: SIEMENS SINUMERIK 828D Technical details: Control system: SIEMENS SINUMERIK 828D Swing over bed: 650 mm Swing over cross slide: 540 mm Max. turning diameter: 395 mm Bar capacity: 67 mm X-axis: 235 mm Y-axis: 105 (±52.5) mm Z-axis: 580 mm Feed rate (X / Y / Z): 24/10/24 m/min Main spindle: Spindle speed: 4,500 rpm Torque: 169.8/89.2 Nm Spindle nose: A2-6 Spindle bore: 76 mm Spindle bearing diameter: 110 mm Drive power - main spindle: 20/10.5 kW Sub-spindle: Spindle speed: 6,000 rpm Torque: 45 Nm Spindle nose: A2-5 Spindle bore: 45 mm Spindle bearing diameter: 90 mm Drive power - sub-spindle: 7.8 kW Tool turret: Number of tool stations: 12 pos. Shank size for square tools: 25 x 25 mm Shank diameter for boring bars: 40 mm Tool interface: BMT 55 Torque of driven tools (max./constant): 44.4/23.4 Nm Total power requirement: 49 kVA Machine dimensions approx.: 4,130 x 1,752 x 2,085 mm Machine weight approx.: 4,200 kg Bedpfx Apszzrhyj Ioww Additional information In our assessment, the machine is in mint condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, Year of construction: 1997, CNC Turning Center VDF Boehringer VDF 250 Cm (NO TAILSTOCK) General Manufacturer: VDF Boehringer Model: VDF 250 Cm Type: CNC slant bed turning center, chuck work Year: 1997 Serial no.: 1114.3705-24 Control: Siemens Sinumerik 840C Location: Korschenbroich, Germany Working area Swing over bed: 550 mm Swing over cross slide: 480 mm Max. turning length: 1,000 mm Tailstock: none (chuck work only) Main spindle Spindle nose: size 8, DIN 55026 Spindle bore: 103 mm Max. speed: 4,500 rpm C-axis: yes Axes X travel: 405 mm Z travel: 1,099 mm Rapid traverse: 10 m/min Feed range: 0.1 to 10,000 mm/min Turret 12 stations, VDI 50 (DIN 69880) Driven tools: yes, up to 2,500 rpm, 5.4 kW Driven tool torque: 25 Nm (standard), 100 Nm (low range) Clamping Hydraulic power chuck, special swivel chuck (Sonderschwenkfutter) Full hydraulic clamping cylinder Equipment Coolant system: 600 l tank, 5.5 bar, 60 l/min Chip conveyor: right-hand discharge Hydraulic unit: Hydrokraft Control cabinet: Rittal, with cooling unit Oil mist extractor: yes Pivoting operator panel Bwedpfx Asz Rnrrjp Iew Electrical 400 V, 3 phase, 50 Hz Main fuse: 125 A Operating current: 100 A Total connected load: approx. 50 kW Dimensions and weight Approx. 5,400 x 3,200 x 2,400 mm (L x W x H) Weight: approx. 10,500 kg Points to check before sending: Weight. The other listing says about 11,000 kg. I used 10,500 kg because that is what is written on the machine (“10,5 to.”). Chuck make. The listing names a Forkardt chuck. The marking on the chuck in your second photo looked like it could be Röhm, so it’s worth a quick look. resale Chip conveyor. It is not visible in the photos. Confirm it is with the machine. Control model. The 840C comes from the listing only. The screen photo doesn’t show it clearly.

Condition: used, Year of construction: 1997, functionality: fully functional, turning diameter over cross slide: 450 mm, turning length: 420 mm, turning diameter: 350 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 180 mm, travel distance Z-axis: 420 mm, overall weight: 3,500 kg, KEGAI TUR-15 Manufacturer: Ikegai Model: TUR-15 Machine Type: CNC Turning Center Bsdpfx Apozvmytj Ijww Year: 1997 CNC Control: Fanuc Series 18-T Drives: Fanuc Alpha Series Number of Axes: 2 Swing Over Bed: Approx. 450 mm Maximum Turning Diameter: Approx. 350 mm Maximum Turning Length: Approx. 410–420 mm X-Axis Travel: Approx. 170–200 mm Z-Axis Travel: Approx. 420 mm Chuck: 8" Hydraulic Chuck Spindle Nose: A2-6 Spindle Bore: Approx. 57–61 mm Bar Capacity: Approx. 45–51 mm Spindle Speed: Up to 4,000 rpm Spindle Motor Power: Approx. 11 kW / 15 HP Turret Capacity: 12 Stations Tailstock: Included Chip Conveyor: Included Machine Dimensions: Approx. 2,440 × 1,470 × 1,575 mm Machine Weight: Approx. 3,300–3,700 kg

Condition: good (used), Year of construction: 2008, Ref. -No.: 10474 Manufacturer: SPINNER Type: TC77 MCY Year of construction: 2008 Type of control: CNC-Steuerung Control: Siemens 840 D Storage location: Halberstadt Country of origin: Germany Machine-No.: AP0XXXXX Chuck diameter: 210 mm Tailstock - diameter: 110 mm Feed speed X / Z: 15/24 mm / min Turning Diameter: 500 mm Max. Torque: 113 Nm Travel -X Axis: 350 mm Travel -Y Axis: 230mm (-110mm +120mm) mm Travel -Z Axis: 1160 mm Distance Between Centres: 800 mm Spindle 1 spindle head diameter (flange): A8 mm Spindle 2 spindle head diameter (flange): A6 mm Quills Morse taper: MK4 Turret places: 12 Pcs Machine length: 3250 mm Machine width: 1980 mm Machine Height: 2090 mm Weight Of The Machine Ca.: 7,5 t Max. swing diameter: 690 mm Further information: Spindle head: A8 Bar capacity: 77mm Bar capacity: 52mm Number of rotating tool positions: 12 Y axis + C axis. Bodpe Ahkvzofx Ap Ieww Machine can be inspected under power by arrangement.

Condition: used, Year of construction: 2009, controller manufacturer: Siemens, controller model: 840 Dsl, _____ Description: Year of manuf. : 2009 - RETROFIT 2019 Control : Siemens 840 Dsl Turning diam. : 200 mm Turning length : 550 mm In General: Year of manufacture:2009 - RETROFIT 2019 Control system:Siemens 840 Dsl Bar capacity:65 mm Main spindle Technology:Direct drive spindle Speed:5,000 rpm Max. power:33 kW Max. torque:150 Nm C-axis:0.00014° Bar capacity:65 mm Clamping cylinder:Hollow clamping cylinder Chuck:Hainbuch Spanntop Sub spindle: Technology:Direct drive spindle Speed:5,000 rpm Max. power:22 kW Max. torque:100 Nm C-axis:0.00014° Z-axis:700 mm Bar capacity:65 mm Clamping cylinder:Hollow clamping cylinder Chuck:Hainbuch Spanntop Tool carrier I (X/Y/Z): Technology:Tool turret on cross slide Number of stations:14 Tool holder:VDI 25 Tool drive:8,000 rpm, 16 Nm X-axis:110 mm Y-axis:100 mm Z-axis:320 mm Tool carrier II (X/Y/Z): Technology:Tool turret on cross slide Number of stations:14 Tool holder:VDI 25 Tool drive:8,000 rpm, 16 Nm X-axis:110 mm Y-axis:100 mm Z-axis:550 mm Bsdpfx As Ah Adfsp Ijww Tool carrier III (X/Y/Z): Technology:Tool turret on cross slide Number of stations:14 Tool holder:VDI 25 Tool drive:8,000 rpm, 16 Nm X-axis:180 mm Equipment: Chip removal:Chip conveyor Coolant supply:Pump station Bar feeder:Irco Profimat Part removal:Part gripper + indexing belt Chucks:2x Hainbuch chucks Tool holders:Various static and driven holders : Note:The machine was overhauled (retrofitted) by Index in 2019

Condition: good (used), Year of construction: 2010, operating hours: 5,750 h, functionality: fully functional, turning length: 393 mm, turning diameter: 200 mm, spindle bore: 51 mm, MSX 853 cnc control 3-jaw chuck diameter 210mm 12-fold revolver C-axis driven tools tail stock coolant device chip conveyor Technische Daten: / technical details Drehdurchmesser / turning diameter 200 mm Drehlänge / turning lenght 393 mm X-Weg / X-travel 160 mm Z-Weg / Z-travel 450 mm max. Drehzahl Spindel / max. spindle speed 50-3000 UpM /rpm Bwodpfxozd S S Rs Ap Iow Eilgang X/Z / rapid feed X/Z 24/30 Anzahl der Revolverplätze / number of tool places 12 max. Stangendurchmesser / max. bar diameter 51 mm Antriebsleistung Spindel / drive capacity spindle 13,5 kW Gewicht ca. / weight ca. 3500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, CNC turning machine Okuma LB 400-M Bwjdpfx Aps Ahm Ups Isw Control system: OSP-E100L Year of manufacture: 2005 Internal machine number: 83 Turning length: 1,250 mm Turning diameter: 620 mm Spindle speed: 3,500 rpm Tool turret: 12 stations (powered) Tool holder: VDI 40 Spindle bore: approx. 110 mm 3-jaw chuck Kitagawa B15 Equipment: - Chip conveyor - Coolant system - Touch probe - Tailstock

Condition: used, Year of construction: 2013, operating hours: 48,437 h, spindle speed (max.): 7,000 rpm, overall weight: 9,800 kg, CNC Lathe Manufacturer: DMG MORI Type: SPRINT 50 3T+B Year of manufacture: 2013 Technical details: Spindle speed: 7,000 rpm Number of tool stations: 3 x 12 Machine weight: approx. 9.8 t Bwsdpfxj Advfrj Ap Ijw Operating hours: approx. 48,437 h Spindle hours: approx. 33,559 h Condition: used Available from December 2026 Technical features & accessories: - 2 cross slides - 3 turrets with 12 stations each (all driven) - Main and counter-spindle - 2 C-axes - 3 Y-axes - Y-axis on slides 1 and 2 - Chip conveyor - LNS bar loader - Workpiece unloading system - Differential pressure clamping system for counter-spindle - Z-Y axis for slide 5 - Emulsion cooling system - Conveyor belt for finished workpieces (external to the machine) - Electrical and software interface for oil mist extraction system - B-axis Accessories, tools, and clamping devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: used, Year of construction: 2004, functionality: fully functional, Equipment: documentation/manual, CMZ Turning Center 4 Axes: X, Z, C, B Type: TL 25 BTM Bwedpfxsz Ih A Dj Ap Iew Year: 2004 CNC: GE Fanuc Series 18i-TB Video Available Inspection Possible Jaw Chucks: Included ✅ Tool Holder: Included ✅ Documentation: Included ✅ Chip Conveyor: Included ✅

Condition: good (used), Year of construction: 2008, functionality: fully functional, turning length: 750 mm, turning diameter: 590 mm, spindle bore: 78 mm, spindle speed (max.): 3,000 rpm, Equipment: documentation/manual, Centre distance: 750 mm Swing: 590 mm over bed / 375 mm over slides Bwsdjxmvzuopfx Ap Iew Spindle speeds: 25 - 3.000 rpm Spindle bore: 78 mm Revolver: 10 Platze Controller: Siemens 810D Shopmill Featured with: - Double footpedals - Chipconveyor - Machine manuals Country of origin: Z. Korea Motor power: 25 kW Machine weight: 6.000 kg Machine LxWxH: 300 x 180 x 190 cm