Used Cnc Factory for sale (10,491)

Condition: new, Year of construction: 2026, axis stroke (X,Y,Z) 2100,5000,300 mm Dwedpfx As Ad Rnnscyjd Number of tools 12 St. Dimensions (L/W/H) 6000x2900x2810 mm Weight 4500 kg

Condition: good (used), Year of construction: 2001, Machine is in good working condition. Dwedpfx Aez Uvpmocyed Parts shown by hand not come.

Condition: good (used), Year of construction: 2014, Parts shown by hand not come. Dwodpfxez U Tiks Acyed

Condition: used, Year of construction: 2011, Manufacturer: DMG GILDEMEISTER, Type: NEV 400, Year of manufacture: 2011, Operating hours: 39,722, Spindle hours: 12,928, Control system, Manufacturer: Siemens, Type: Sinumerik 840D, 21" operator terminal ERGOline, Touchscreen, 3-jaw chuck, Tool turret, 12 tool positions, Center distance 805 mm, Turning length 650 mm, Travel X/Z/Z 255 x 800 x 680 mm, Chip conveyor +++ ATTENTION! This machine is part of an online auction! +++ Dodpfx Aoz Tlfzjcyswd

Condition: excellent (used), Year of construction: 2003, FOR SALE – LOT OF 8 MORI SEIKI CNC TURNING CENTERS Selling a single lot of 8 MORI SEIKI CNC turning centers, including: 8 MORI SEIKI CL-05 turning centers – year 2003. All machines are functional and complete, with their tools and tool holders. Chip conveyors included. Selling the entire lot only. Djdsz Tqp Ejpfx Acyjwd Photos and further information available upon request. Price for the lot available upon request.

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, CNC lathe GILDEMEISTER CTX 420 linear With Heidenhain ELTROPILOT 4290 control system Year of manufacture: 2003 Max. turning diameter: 324 mm Max. turning length: 600 mm Max. swing diameter: 680 mm Spindle bore: 79 mm Dwodpfxo Aazxvo Acysd Max. spindle speed: 4500 rpm With the following accessories: Sliding guard with internal lighting 12-station turret Various tool holders VDI 40 Tailstock with quill Chip conveyor Hydraulic chuck SMW Autoblok 0 250 mm Foot switch for chuck + tailstock adjustment Oil mist extractor Coolant system Operating manuals

Condition: used, Year of construction: 2008, machine/vehicle number: 30655, overall weight: 5,500 kg, total length: 2,540 mm, total width: 2,290 mm, total height: 2,340 mm, FICEP P51 - CNC PUNCHING & DRILLING MACHINE FOR FLAT BAR AND PLATES | YEAR 2008 | 800 KN The Ficep P51 is a CNC-controlled punching and drilling machine for automated hole processing of flat bar and plates. Punching and drilling run in a single pass with automatic material feed - saving marking, re-clamping and handling on parts with many holes. CONDITION & HANDOVER Used machine from stock, year 2008, serial number 30655. - Condition and function are confirmed during the viewing or upon request. - Viewing possible by arrangement (no demonstration under power). - Service and reconditioning before handover by arrangement. FUNCTION & APPLICATION A hydraulic punching unit and an integrated drilling unit process the workpiece in one pass. A carriage with hydraulic, self-adjusting grippers and ball screw drive positions the material under CNC control (Ficep MINOSSE). Processes: punching, drilling, marking, countersinking and tapping. Typical applications: structural steelwork and connection technology as well as the fabrication of beams, brackets and frame structures with a high share of holes. TECHNICAL DATA - Manufacturer: Ficep | Model: P51 | Year: 2008 | Serial number: 30655 - Machine type: CNC punching and drilling machine - Punching force: 800 kN (approx. 80 t) | Punching units: 1 - Max. punching diameter: 46 mm | Material thickness (punching): 3-25 mm - Drilling units: 1 | Spindle power: 7.5 kW | Max. drilling diameter: 28 mm - Plate width: 100-500 mm | Plate length: from 100 mm, not limited by design thanks to roller conveyors - Workpiece weight: up to 100 kg (standard) / up to 250 kg (reduced positioning) - Travel: X 1,000 mm | Y 500 mm | Positioning speed: 20 m/min - Carriage drive: ball screw | Clamping: hydraulic grippers - Control: Ficep MINOSSE CNC - Frame: one-piece steel C-frame with integrated hydraulic unit, electrics, pneumatics and CNC unit - Machine dimensions (L x W x H): approx. 2,540 x 2,290 x 2,340 mm | Machine weight: approx. 5,500 kg SCOPE OF DELIVERY - 1 x Ficep P51 main machine (one-piece steel C-frame) Dwedpez Nyvysfx Acyod - 1 x punching unit (800 kN) - 1 x drilling unit (7.5 kW) - 1 x carriage with hydraulic grippers and ball screw drive - 1 x Ficep MINOSSE CNC control unit - 1 x hydraulic unit (integrated in the machine frame) - 1 x safety light curtain LOGISTICS & LOCATION Location: Ulft (Netherlands), close to the German border. Dismantling, transport, installation and commissioning can be carried out by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) specializes in reconditioned Ficep structural-steel machinery - from sawing and drilling lines and profile drilling machines to plasma cutting systems. Further Ficep machines on request. CONTACT / INQUIRY Arrange a viewing | Price on request | Request a callback. Sale exclusively to commercial customers (B2B).

Condition: used, Year of construction: 2012, Used machine Nesting cell Year of construction: 2012 Gantry machine in Gnatry design Working area in X = 4300 mm Working area in Y = 2250 mm Working area in Z = 125 mm Travel speed X - Y - Z-axis 100 - 100 - 20 m/min with grid table and sacrificial plate with 3 vacuum pumps, each with 300 m³/h (one of them from 2026) Spindle motor 12 kW with torque support and C-axis with Homag Flex 5 tool interface Tool clamping system HSK-F 63 Dodpfxsz Rrbqo Acyjwd Tool changer with 14 tool positions Loading with vacuum lifter and roller conveyor Unloading with conveyor belt with manual label printer Safety device: stepping mat Caution! Drilling head is defective! Availability: approximately July 2027 Location: North Rhine-Westphalia

Condition: used, Year of construction: 2005, Fritz Werner TC630-N CNC 5-axis (3 + 2) horizontal machining centre with Siemens 840D control with Knoll coolant through spindle system, Knoll chip conveyor, Renishaw probe interface, mist extraction unit, chiller, handwheel & manuals Rohm Power Chuck & Rohm Collet System On Rotary Table. Axis Travel 'X'=1,000mm, 'Y'=820mm, 'Z'=400mm, 'C'=360°, 'B'=360°. Maximum Spindle Speed 6,000rpm. Spindle Taper SK50. 50 Position ATC. Djdpjz Hzwrofx Acyowd

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 0154, One of my clients is looking to sell his Okuma LB25-M lathe with powered tools, as he prefers to use Mazak machines in the future. - Machine: Okuma LB25-M Dwsdpfs Afpp Hsx Acyjd - Equipment: Powered tools - Condition: Good - Status: Still in production - Price: €25,000 - Location: Weyerbusch near Altenkirchen, Germany The machine can be inspected on site by appointment.

Condition: excellent (used), Year of construction: 2009, operating hours: 19,774 h, 1 used CNC turning and milling center, DMG-GILDEMEISTER CTX beta 1250 TC, with SIEMENS Sinumerik 840 D sI control. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany Dwjdpfxs Afan Te Acyjd

Condition: good (used), Control system: Siemens 840 D Turning diameter: 290 mm Dwode Afacdjpfx Acyjd Turning length: 850 mm Distance between centers: 600 mm Spindle bore: 103 mm Spindle speed: 3,000 rpm Driven tool speed: 3,000 rpm Chip conveyor Weight: 11,000 kg

Condition: good (used), Year of construction: 1990, functionality: fully functional, turning length: 2,000 mm, turning diameter: 1,000 mm, spindle bore: 104 mm, overall weight: 11,000 kg, CNC Lathe: SCNC 1000 DC x 2000 Year of manufacture: 1990 Control system: Fanuc O-TF Maximum swing over bed: Ø 1000 mm Distance between centers: 2000 mm Spindle bore: Ø 104 mm Djdpfxe Agcwas Acyowd Machine weight: 11000 kg. Loading into a container or onto a truck is possible.

Condition: used, CNC universal tool milling machine DECKEL, type FP 4 MA Machine No. 2204-1734, Serial No. 25842, Year of manufacture 1989 CNC path control: GRUNDIG Contur 2 Travel distances: X: 485 mm, Y: 385 mm, Z: 380 mm Table size: 800 x 460 mm Spindle mount: ISO 40 Spindle speed: 63 - 3150 rpm, 18 speeds Feed rate: max. 2000 mm/min Distance table - spindle nose: max. 480 mm Arbor displacement, vertical: 80 mm Arbor displacement, horizontal: 150 mm Main spindle drive: 3.7 / 4.4 kW Power supply: 400 V, 50 Hz, 13 kW - CNC path control: GRUNDIG Contur 2 with TFT screen - Hydro-mechanical tool clamping - Swiveling control panel - Electronic handwheel for all three axes - Mechanical handwheels for all three axes - Fixed angular table - Coolant system in the machine base - Central lubrication - Control cabinet located next to the machine, dimensions W x D x H: 800 x 750 x 1150 mm Space required, dimensions W x D x H: 2400 x 2300 x 2000 mm Weight: approx. 2400 kg In good condition Dwjdpfx Acszwmc Rjyed

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, In excellent condition, fully functional. Dwede Afi Ebopfx Acyjd

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 610 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, controller manufacturer: HEIDENHAIN, controller model: TNC7, spindle speed (max.): 5,000 rpm, number of axes: 3, This 3-axis KUNZMANN WF 610 CNC was manufactured in 2024. It features a longitudinal travel of 610 mm, transverse travel of 400 mm, and vertical travel of 450 mm. The machine is equipped with a 20-station tool changer and a maximum table load of 300 kg. If you are looking to get high-quality milling capabilities, consider the KUNZMANN WF 610 CNC vertical machining centre we have for sale. Contact us for further details. - Demonstration machine- Spindle Hours: 332 h- Program Run Hours: 310 h- Feed Rate (Rapid Traverse): X/Y/Z up to max. 30/30/15 m/min - Main Drive (Option Installed): SK 40 Motor Spindle, 1 - 12,000 rpm (Swiss made) - Spindle Power: 8.5 kW (S1-100% ED) / 11.5 kW (S6-40% ED) - Spindle Torque: 43 Nm (S1-100% ED at 1,880 rpm) / 58 Nm (S6-40% ED at 1,880 rpm) - Tool Interface: SK 40 DIN ISO 7388-1 Form AD (formerly DIN 69871 AD) with pull stud DIN ISO 7388-3 Form AD (formerly DIN 69872) - Tool Clamping: Mechanical, clamping force 10,000 N, hydraulic release - Vertical Milling Head: Direct-driven, manually tiltable -5/+90°, extendable quill with turnstile (stroke 70 mm, clampable) - Rigid Angle Table Surface: 800 x 425 mm - Table T-Slots: 6 x 14 H7 (pitch 63 mm) - Max. Table Load: 300 kg - Tool Changer: 20-station disc magazine, SK 40 - Max. Tool Diameter: 75 mm (full magazine) / 150 mm (with adjacent empty pots) - Max. Tool Length: 250 mm - Max. Tool Weight: 8 kg - Tool Change Time: approx. 3 s (chip-to-chip approx. 15 s) - Positioning Accuracy (ISO 230-2): 0.008 mm (direct linear measuring systems) - Repeatability (ISO 230-2): 0.006 mm (direct linear measuring systems) - Measuring System: HEIDENHAIN absolute direct linear measuring system (resolution 0.001 mm) - Coolant Through Spindle (IKZ): 50 bar high-pressure pump (26 l/min), 4-stage pressure adjustment (15/25/40/50 bar), 25 µm double switch filter - Internal Air Cooling: Through-spindle air cooling, M-function programmable - External Air Cooling: Flexible articulated hose, M-function programmable - Paper Band Filter Unit: Trommel-mulden filter with 600 l external tank, type VDF150/50/50 (150 g/m²) filter fleece (dimensions: 1800 x 860 x 1620 mm) - Chip Conveyor: Hinge-belt conveyor integrated into 115 l coolant tank, 60° incline, lateral discharge left (height 870 / 1060 / 1200 mm) - Workpiece Probe: HEIDENHAIN TS 460 3D probe (infrared) with SE 661 transceiver - Additional Axes Preparation: 4th axis preparation (axis controller in electrical cabinet, pre-wired interface) - Automation Interface: Preparation kit for EDUCATION4.0 Cobot cell (Harting connector I/O interface, pneumatic connection, plus 2x pneumatic table connections max. 6 bar) - Enclosure Door: Automatic sliding front door driven by belt drive (manual push button & programmable) - Software Option: OCM (Optimized Contour Milling) for advanced trochoidal milling - Handwheel: HEIDENHAIN HR 510 FS electronic handwheel with axis selection and emergency stop - Operating Voltage: 400 V, 50 Hz - Power Consumption: approx. 21 kVA - Control Voltage: 24 V - Compressed Air Supply: 6.5 - 10 bar (min. 6.5 bar required at machine) - Machine Weight: approx. 2,900 kg (with tool changer) Dwjdpfo Af Nzujx Acyjd

Condition: used, Year of construction: 2000, 3 Muratec machines 1 MURATEC MT12 CNC lathe Dual spindle, dual turret Year: 1999 + 1 STAUBLI RX90 robot with control center Dwjdpfx Acs Aggc Ssysd 1 Muratec MT12 CNC lathe with dual spindle and dual turret 4 axes Year: 2000 1 BOSS 542/32 CNC loading system 1 Muratec MT12 CNC lathe with dual spindle and dual turret Fanuc CNC Year: 1999 Supplied with all tooling and tool holders.

Condition: excellent (used), operating hours: 8,640 h, Maximum height 260 mm Turning length 600 mm Maximum turning diameter over the bed cover 400 mm Maximum turning diameter over the compound slide 225 mm Cross travel 260 mm Longitudinal travel 660 mm Spindle head DIN Size 140 h5 Spindle bore 68 mm Speed range 25 – 4000 rpm Feed range, longitudinal and cross 0.5 – 5000 mm/min Rapid traverse, longitudinal and cross 9 m/min Taper in spindle MK 4 Tailstock quill stroke 100 mm Main drive 22 kW Dimensions L x W x H approx. 3600 x 1720 x 1650 mm Weight 3200 kg Accessories / Special features: • CNC control GILDEMEISTER EPL 2 • Electronic handwheel • RS 232 interface • Manual 3-jaw chuck, diameter 200 mm • 12-station tool turret, manufacturer SAUTER, internal coolant supply, VDI 30, tool holder bore Ø 30 mm, DIN 69880 • Swiveling chip conveyor with coolant system • Electric foot switch for hydraulic 3-jaw chuck and hydraulic tailstock quill Dwedpfsz Icuzox Acysd • Various tool holders • Lighting Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 2019, functionality: fully functional, table length: 8,000 mm, table width: 2,540 mm, overall weight: 8,000 kg, sheet thickness steel (max.): 100 mm, cutting length (max.): 8,000 mm, cutting width (max.): 2,540 mm, drill diameter: 40 mm, FICEP TIPO G25LG - CNC PLATE PROCESSING LINE (DRILLING, MILLING, THERMAL CUTTING) | YEAR 2019 The Ficep Tipo G25LG is a CNC plate processing line for combined drilling, milling, tapping and thermal cutting of steel plates in structural steel fabrication. Built in 2019 - a young machine in its class on the used market. All processes run in a single pass on a rigid double-bridge gantry frame. CONDITION & REFURBISHMENT Refurbished and inspected by a certified technician, ready for operation. - The exact scope of reconditioning varies from machine to machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machine reconditioned - no demonstration under power). FUNCTION & APPLICATION The vertical mono drilling unit with automatic tool changer (ISO 40) performs drilling, milling, tapping, centre-punching and countersinking. The Hypertherm XPR300 plasma torch and the integrated oxy-fuel cutting unit handle thermal cutting - from thin sheet to heavy plate. The line is operated via the Ficep Pegaso CNC control. Infeed and outfeed roller conveyors with material transfer (8 m each) ensure continuous material flow. Typical applications: structural steel fabrication, steel trading and plant engineering. TECHNICAL DATA - Manufacturer: Ficep | Model: Tipo G25LG | Year: 2019 | Serial number: 36098 - Machine type: CNC plate processing line (drilling / milling / thermal cutting) - Condition: used, refurbished by certified technician - Frame design: double-bridge gantry frame, welded | Machine weight: 8,000 kg - Plate width: max. approx. 2,540 mm, min. 200 mm - Plate thickness: max. 45 mm (plasma cutting), max. 100 mm (drilling) - Drilling heads: 1 (vertical mono drilling unit) | Tool holder: ISO 40 - Max. drilling diameter: 40 mm | Max. drilling/milling depth: 100 mm - Max. spindle speed: 7,000 rpm | Spindle power: 15 kW - Plasma cutting torch (straight): 1 | Plasma source: Hypertherm XPR300 | 300 A - Oxy-fuel cutting unit: included - CNC control: Ficep Pegaso CNC - Processes: drilling, milling (incl. straight/curved slots, Y/J weld-edge preparation), tapping, centre-punching, countersinking, marking, scribing, straight plasma cutting, oxy-fuel cutting On request (to be confirmed bindingly during inspection): processing length, tool magazine stations, min. plate thickness for drilling, min. drilling diameter, pass line height, longitudinal and cross positioning speeds, connected load and machine dimensions. SCOPE OF DELIVERY - 1 x Ficep Tipo G25LG CNC drilling, milling and thermal cutting line (year 2019) - 1 x Ficep Pegaso CNC control - 1 x Vertical mono drilling unit with automatic tool changer (ISO 40) - 1 x Plasma cutting torch (straight) | 1 x Hypertherm XPR300 plasma source (300 A) - 1 x Oxy-fuel cutting unit - 1 x Infeed roller conveyor with material transfer (8 m) | 1 x Outfeed roller conveyor (8 m) - 1 x Extraction system for plasma cutting Dedpfou Dw I Ejx Acyswd LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM): specialist for refurbished Ficep structural-steel machinery. Further machines on request. CONTACT / INQUIRY Viewing by arrangement | Price on request. Sale exclusively to commercial customers (B2B).

Condition: used, Year of construction: 2004, Technical details: tube diameter: 20 mm bending radius max.: 100 mm control for program: S7-300 tube pipe draw up length: 2270 mm Dedpfxju Ibzko Acyewd air pressure - required: 7 bar total power requirement: 15 kW Bending speed: 540 °/sec control voltage: 24 V / DC V connection voltage: 400V / 50Hz / 3 Ph V dimensions L x W x H: Biegeaggregat: 1,8 x 1,4 x 1,6 m dimensions L x W x H: Zuführung: 1,2 x 1,5 x 1,55 m dimension machine xH: 3,0 x 1,0 x 1,2 m Mandrel tube bending machine Bending direction RIGHT Operation via SIMANTIC Panel PC control unit Pneumatics: Pressure 7 bar; flow rate 200 l/min. Hydraulics: Pressure 150 bar; flow rate 6.8 l/min. Equipment/Accessories: -oil drip tray 3.1 x 0.96 x 0.02m -Spare parts and accessories *

Condition: good (used), Year of construction: 2016, functionality: fully functional, turning length: 669 mm, turning diameter: 330 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 762 mm, bar passage: 75 mm, CNC control Sinumerik 828D 12-fold revolver Sauter VDI40 driven tools C-axis 3-jaw chuck and collet chuck device Tool Eye part catcher chip conveyor tail stock coolant device with high pressure pump bar loading device Iemca Technische Daten / technical details: Umlaufdurchmesser über Bett / rotary diameter over bed 600 mm max. Drehdurchmesser / max. turning diameter 330 mm max. Drehlänge / max. turning length 669 mm X-Weg / X-travel 260 mm Z-Weg / Z-travel 762 mm Drehzahl / spindle speed 3400 UpM /rpm Werkzeugrevolver / turret head 12 fach /holes max. Stangendurchmesser / max. bar diameter 75 mm Eilgang X / rapid feed X 20 m/min Eilgang Z / rapid feed Z 24 m/min. Gewicht der Maschine ca. / weight ca. 5700 kg Dodpfx Ajyt Hp Dscyswd Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, CITIZEN CINCOM R 07 VI is a high-precision CNC automatic lathe (Swiss-type) delivering strong accuracy and reliability. Capacities: 6 axes, 2 spindles; max turning Ø 7 mm, max length 40 mm, spindle bore 12 mm; threading up to Ø4 M, max tapping length 40 mm. Specs: spindle 0–16,000 rpm, 1.1 kW; back spindle up to 10,000 rpm, 0.5 kW; C-axis resolution 1°; supply 3x400 V 50 Hz, total power 4 kVA; weight ~950 kg; footprint 1465×560×1410 mm. Accessories: parts catcher, lamp, bar feeder LNS TRYTON 107, central lubrication, status light. Built to achieve tight tolerances; typical applications include automotive, watchmaking, medical, aerospace, and machine-tool components Dwodpfjyxnutsx Acyed

Condition: like new (used), ELB SMART BD10 STC is a CNC surface/profile grinder engineered for high precision, accuracy and reliability. Capacities: table 1360×590 mm, X1100 Z670 Y400 mm, grinding 1000×600 mm, table load 1000 kg. Specs: wheel Ø400×100 mm (bore127), 1450 rpm, spindle 10 kW, table 2–30 m/min stepless, feeds up to 2000/1500 mm/min, vertical rapid 1 m/min, 3×400V 50Hz, total 30 kW; machine ~6900 kg; dims 3550×2410×2660 mm. Accessories: coolant, paper filtration, oil‑mist extractor, magnetic plate 800×600, redressing/profile roll devices, wheel/flange sets, electronic handwheel. Achieves tight tolerances; suited to automotive, aerospace, toolmaking, medical, watchmaking. Dodsyxn N Djpfx Acyjwd

Condition: good (used), Year of construction: 2007, operating hours: 14,500 h, functionality: fully functional, turning diameter over cross slide: 370 mm, turning length: 1,000 mm, turning diameter: 340 mm, spindle bore: 62 mm, spindle speed (max.): 5,000 rpm, total height: 1,900 mm, total length: 3,200 mm, total width: 2,200 mm, overall weight: 7,500 kg, Equipment: documentation/manual, rotational speed infinitely variable, OKUMA LB300MC1000, OSP P200L control, V12 turret VDI40, V12 driven tools VDI40, manual tailstock, chip conveyor, coolant pump, standard spindle 5000 RPM, touch setter, Dwsdpjymfmnofx Acyod

Condition: good (used), Year of construction: 2008, functionality: fully functional, Okuma Multus B300-W Dwedpfxjyg Rf Nj Acysd 6-axis turning and milling center - Okuma OSP P200L - Year 2008 - Cutting time: 10,500 h - H1 milling spindle: 6,000 rpm - Main spindle: 3,800 rpm, Rota NC 315-86 - Counter spindle: 5,000 rpm - ATC 60 system HSKA-63 (60 tools) - Geometry: very good - Marpos tool sensor