Used Climatic Chamber for sale (5,768)

Condition: reconditioned (used), Overhauled and new painted. The pictures are sample photos of similar machines and are intended to show the execution and quality of the overhaul. All wear parts are renewed. Filter cloths new. 1 year warranty on the filter press, excluding wear parts. Plate size: 630 x 630 mm dimensions: approx. 2900 x 1100 x 1500 mm Chamber depth: 25 mm Capacity: 312 liters Itodpfx Aenh Nr Ioacen Operating pressure: 12 / 15 bar Turbidity inlet: flange 2", centered Number of plates: 40 plates Material plates: Polypropylene Material cloths: PP 5009 (white) Design: open filtration Closing pressure: max. 385 bar Painting: primed and painted in RAL 5010, filtrate trough + drip plate in plastic, Motor hydraulics with single acting cylinder. Optional double-acting cylinder that retracts the heavy pressure plates. With the single-acting cylinder, the operator must push back the pressure plates by hand. Optional: Filling pump as piston diaphragm pump or compressed air diaphragm pump.

Year of construction: 1988, condition: used, machine/vehicle number: 8829-III, max. temperature: Vorwaerm-/Haertekammer 1000/1350 °C electrical connection: 380 V kW dimensions of the machine: 1150 x 1500 x 1840 mm weight: gesamt ca. 900 kg Itjdpfxj Rxa Ne Aacjn heating capacity: Vorwaerm-/Haertekammer 9/25 kW

Condition: excellent (used), CTS Type: TS-70/1150-10 CTS Temperature Test Chamber, Water-Cooled Control: 32-bit Controller LCD Operating Panel Digital Display of Set and Actual Values Numerical Input of Set Points Error Messages in Plain Text RS 232 Interface Ethernet Interface Free control channels for customer-side DUT (device under test) actuation Operation: capacitive touch display & PC-based control (USB/Ethernet) Test Chamber Dimensions: Height approx. 1250 mm / Width approx. 1000 mm / Depth approx. 920 mm External Dimensions: Height approx. 2000 mm / Width approx. 1800 mm / Depth approx. 1600 mm Temperature Testing: Temperature Range: -70°C to +180°C Temperature Deviation: ≤ ±0.5 K over time Temperature Change Rate according to IEC 60068-3-5 Heating: 10 K/min Cooling: 10 K/min Thermal Load: approx. 5000 W at -20°C Technical data refer to an ambient temperature of +25°C Test Volume (interior): approx. 1150 liters Operating Data: Electrical Connection Nominal Voltage: 400V 3/N 50Hz Power: 27.6 kW Itsdpfew R Tunjx Aacen Nominal Current: 47.5 A Refrigeration System: Two-stage R404A (17.8 kg) + R23 (5.4 kg) Weight: approx. 1500 kg The following steps are completed on our offered chambers in advance: 1. Function check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to change and error in technical data and information!) We are happy to answer any further questions you may have by phone.

Condition: ready for operation (used), consisting mainly of: - 2 pieces of second-hand multi-purpose chamber furnaces, make: IVA, type: MKG 2s, 70/95/110, year of manufacture 2007, gas heated - 1 piece of second-hand tempering furnace, type: KEL 70/95/100-500°C, electrically heated - 1 piece of second-hand protective gas tempering furnace, type: RH 70/95/110 gs, gas-heated - 1 piece of second-hand flood spray system, type: DFS 1100 - 1 piece of second-hand charging trolley, electric motor driven - 1 piece of second-hand lifting table - 1 piece of second-hand process control system PROSYS/2 with full automation - 1 piece second-hand charging magazine Itsdpsug T Hgofx Aacsn - incl. available spare parts

Year of construction: 1987, condition: good (used), machine/vehicle number: 4695, OFFER 20330 Technical data: - Nominal / continuous temperature preselectable up to approx. 1150 °. - digital temperature setting - timer - interior dimensions approx. W 250 x H 190 x D 400 mm - Charging through front door - Opening width of front door W 240 x H 190 mm Itjdpfxsgvpkve Aacen - drive 400 V / 7,5 kW - Underframe H 800 mm - Space requirement approx. W 900 x H 1450 x D 1100 mm - Weight approx. 120 kg

Condition: good (used), Vötsch VTU 100/150 heating and drying cabinet Manufacturer: Vötsch Type: VTU 100/150 Nominal temperature: 250 °C Usable volume: 1500 m³ Total load: 400 kg Nominal power: 27 kW Connected load: 29 kW Nominal current: 42 A Mains connection: 400 V, 3 PH+N PE, 50 Hz Weight: 780 kg Microprocessor-controlled temperature and program controller Jumo two-point controller Digital display of setpoint/actual temperature, plain text display Easy loading of the device floor via folding ramp Dimensions Interior: (W x H x D) 1000 x 1500 x 1000 mm External: (W x H x D) 1840 x 2389 x 1450 mm You can find more items—new and used—in our shop! Iedpfx Aajxbgt Dscjtn International shipping costs on request!

Condition: good (used), Manufacturer: LIEBISCH Type: 42016001 Itodpfepbv Dpox Aacen Test chamber : 1000 liters

Year of construction: 1978, condition: used, machine/vehicle number: 5181, temperature: + 10 to + 80°C usable space: width 1200 mm depth 1600 mm height 1750 mm electrical connection: 220 V space needed: 1550 x 1900 x 2200 mm high Itodpj Dq Adsfx Aacjn weight: 500 kg

Condition: excellent (used), Heraeus Vötsch Type: VT 7021 Air-cooled temperature test chamber 1 port, nominal width 80 mm, Test chamber volume: 210 liters Temperature range: -70°C to +180°C Temporal temperature deviation: ± 0.2 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate (heating): 2.5 K/min Temperature change rate (cooling): 2.5 K/min Max. heat compensation: 800 W Test chamber dimensions: Width 560 mm, Depth 570 mm, Height 630 mm External dimensions: Width 850 mm, Depth 1250 mm, Height 1640 mm Electrical connection: 1/NPE AC 230 V ± 10% 50 Hz Rated power approx. 1.8 kW, rated current 12 A Refrigerant: R404A and R23 Weight: 355 kg For your safety as a buyer, please note the following information! The following procedures are performed on the chambers we offer, in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant, if required Iedpfxsw Rz Tlj Aacjtn 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Subject to technical modifications and errors in the details!) For further questions, please feel free to contact us by phone.

Year of construction: 2016, condition: reconditioned (used), overhauled, 12 months warranty - Max. temperature 200°C; temperature can be increased to 250°C upon request - Internal dimensions: W 1000 x D 1000 x H 1500 mm - External dimensions: W 1765 x D 1425 x H 2300 mm - Equipped with Jumo Dicon Touch controller - Entry rails for loading the oven - Heating capacity: 36 kW - Net weight: 780 kg - Exhaust nozzle; exhaust fan and electric flap can be retrofitted upon request. Isdpfjvk Navsx Aacotn - Loading trolley available on request (see picture) - Documentation, CE declaration We are happy to offer installation and commissioning. Viewing in our warehouse by appointment. Oven, ovens, drying oven, kiln, heat oven, heating cabinet, industrial oven, annealing oven, heating oven, tempering oven, drying cabinet, chamber oven, baking oven, circulating air drying cabinet, circulating air oven.

Year of construction: 1986, condition: good (used), machine/vehicle number: 4670, Offer 24460 Technical data: - Nominal / continuous temperature preselectable up to approx. 1150 ° - Digital temperature setting - timer - Interior dimensions approx. W 200 x H 190 x D 350 mm - Loading through front door - Opening width of front door W 200 x H 190 mm Itjdpfxsu Abg Aj Aacsn - Drive 400 V / 7.5 kW - Base frame H 800 mm - Space requirement approx. W 900 x H 1450 x D 900 mm - Weight approx. 120 kg

Condition: good (used), Weiss Climatic Test Chamber with Seat Pulsator Manufacturer: Weiss Type: SD 1400/+20 DU Test Chamber: Material: Stainless steel Dimensions Height approx. 800 mm Width approx. 2000 mm Depth approx. 900 mm Capacity: 1440 liters Outer casing Itsdpfx Asxbgrgeacjn Material: Double-coated Zincor sheet Dimensions Height approx. 2000 mm Width approx. 2200 mm Depth approx. 2000 mm HxWxD 2000 x 2200 x 2000 mm Paint finish: Light gray (RAL 9002) Double-leaf door: hinged on the left and right Equipment: Tubing in the floor and ceiling: 2 each, NW 100 mm, for installing the pulsator tables Tubing in the the side walls: 1 each, left and right, 100 mm Cooling unit: Air-cooled Control: Digital measurement and control system DMR Basic control panel: Integrated into the main switch panel Interface: RS 232 C, for connection to a PC Software: Operating software for MS Windows Performance data: Temperature range without air conditioning: +20...+100 °C Temperature stability without air conditioning: +0.2 ... t0.5 K (over time) depending on the range, in steady state Temperature range with air conditioning: 20...+95 °C Temperature stability with air conditioning: +0.2 ... +0.5 K (over time) depending on the range, in steady state Dew point range: 20...+94 °C Humidity range: 10...98 % RH Humidity stability: +3 ... +5 % RH depending on the range, in steady state Temperature change rate measured in the exhaust without a test specimen and without load - Cooling: 0.5 K/min on average, between +100 and +20 °C ⁃ Heating: 0.5 K/min. On average, between +20 and +100 °C The performance specifications refer to an ambient temperature of max. +25 °C and the specified nominal voltage. For proper operation of the system, the ambient temperature must be between +10 and +35 °C. Seat test device with steel construction for placing and attaching to the climatic test chamber, including: • 2 pneumatic weight lifting devices (150 mm stroke) for changing test specimens, 12 weights of 5 kg each • 1 base frame in mild steel welded construction for attaching to the underside of the climatic test chamber. This frame is equipped with removable panels on all sides and has two hinged doors for adjusting the eccentricity. These doors have safety switches. • 2 eccentric discs with bearings and tachometer, 2 connecting rods, 2 ball bearings, • 2 mounting tables, perforated, 20 mm grid, 650 x 650 mm, for attaching the test specimens, made of aluminum, thickness min. 10 mm • 2 mounting plates, perforated, 20 mm grid, 200 x 200 mm, for attaching the buttocks simulation • 2 stainless steel 60° load rods (The connection to the test specimen is not included in our price, but can be offered subsequently upon precise specification.) • 2 three-phase motors, 2 belt drives with tensioning devices, • 1 pneumatic control unit with 2 manual valves, a filter-regulator unit, and a shut-off valve. 1 electrical control cabinet with 2 SEW frequency converters, hand switches, emergency stop button, 2 on/off switches, 2 speed indicators, 2 potentiometers for speed adjustment, 2 pre-selected load changers with zero position and shutdown. Technical specifications: Frequency: 100-1000 strokes/minute Load: 2 x 45 g Stroke: 0-40 mm Load from above: 450 N each You can find more items - new and used - in our shop! International shipping costs upon request!

Year of construction: 2025, condition: new, chamber pasteurizer, with water sprinkler, temperature control for heating rate, holding time and cooling time, heat supply over hot water heat exchanger Isdpoykgxsfx Aacetn throughput: 360 pcs. 1 liter bottles per hour or 550 pcs. 0.5 liter bottles

Year of construction: 1981, condition: used, machine/vehicle number: 23066, temperature: 0 to +120°C usable space: width 1000 mm depth 950 mm height 800 mm electrical connection: 380 V, 9,5 kW Iodpfxe Dqz Re Aacjtn space needed: 1730 x 2330 x 1980 mm high weight approx. 1000 kg

Condition: good (used), Vötsch Model: VCS 7130-15 Vötsch Climate Test Chamber, Water-Cooled Temperature Test Data: Temperature range: -70°C to 180°C Temporal temperature deviation at center of workspace: ±0.3 to ±0.8 K Itjdpowvgwbefx Aacon Spatial temperature deviation: ±0.5 to ±2 K Temperature gradient: 1 to 4 K Temperature change rate: Heating: 16 K/min Cooling: 14.5 K/min Climate Test Data: Temperature range: +10°C to +95°C Humidity range: 10 to 98% RH Temporal temperature deviation at center of workspace: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1 K Temperature gradient: 1 to 2 K Temporal humidity fluctuation at center of workspace: ±1 to ±3% RH Maximum heat compensation: 8000 W Enclosure dimensions: External dimensions with hinges and door lock: Height: 1995 mm, Width: 1680 mm, Depth: 1855 mm External dimensions without hinges and door lock: Height: 1995 mm, Width: 1300 mm, Depth: 1855 mm Internal dimensions: Height: 950 mm, Width: 1100 mm, Depth: 950 mm Test chamber volume: approx. 1300 liters Feedthroughs: The test chamber is equipped with feedthroughs on both the right and left sides. These allow for test leads and testing devices to be routed into the chamber. 1 x R1 NW 125 mm 1 x R1 NW 140 mm 1 x L1 NW 50 mm Test chamber illumination: Halogen bulb 24V, 50W Power supply: 3/N/PE AC 400V ±10% 50Hz Rated power: 44.0 kW Rated current: 63.0 A Customer-provided fuse: 100 A slow-blow Maximum heat output to the environment: 2.2 kW Permissible test item weight: Total load on shelf supports: 100 kg Test chamber floor: 150 kg, Removable shelf: 50 kg Refrigerants: R 404A/R 23 Weight: 1900 kg For your security as a buyer, please note: The following steps are carried out in advance on our chambers offered for sale: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to changes and errors in the technical data and specifications!) We are happy to answer any further questions by phone.

Condition: new, Year of construction: 2025, Recirculating Chamber Furnace, electric, new unit, delivery time 12 weeks - Maximum temperature: 250°C - Internal dimensions (W x D x H): 2100 x 2100 x 2000 mm - Volume: 8,820 liters - Control: Eurotherm Nanodac Controller/recorder with color touchscreen display - 2 pcs. recirculation fans - Double doors with safety door sensors - Overtemperature protection: Eurotherm 3216i - 2 pcs. fresh air fans - Automatic dampers - Electrical design: 400 V / 50 Hz / 3NPE - Increased heating capacity approx. 70 kW - Temperature accuracy: +/- 6 K in an empty oven - Documentation, CE certificate of conformity - Electrical circuit diagram with spare parts list Itodpfxjv Hg Euo Aacsn Note: The oven floor is not insulated but fitted with stainless steel sheet. This allows unrestricted entry for all track widths. Alternatively, an insulated floor can be offered (with customer-defined entry rails). We offer new and used industrial furnaces, which we can also retrofit and upgrade according to customer requirements. Furnace, ovens, drying oven, industrial oven, drying cabinet, heat oven, heat cabinet, recirculating oven, chamber furnace, heating oven, chamber recirculation oven, tempering oven, annealing oven, temper oven, annealing oven.

Operating hours: 3,888 h, condition: good (used), Heraeus Xenotest 1200 CPS weathering tester Xenon device for testing the lightfastness and weather resistance of materials under simulated conditions Electrical connection Iodpexal Hasfx Aacjtn Voltage: 400 V Nominal current: 50 A max. Connected load: 33 kVA max. Power consumption of xenon lamps: 2.8 - 6 kW per lamp Compensation: 3 capacitors, 50 uF each Operating hours: 3888 You can find more items - new and used - in our shop! International shipping costs on request!

Year of construction: 2025, operating hours: 20 h, condition: new, stainless steel construction for 1 Euro-Palette with a loadinghight of 1500mm max 40 crates with 400 x300 x300mm L x B x H Chamberinsidedimensions: 1300x900x1800mm (L x B xH) Thickness of Insulation approx. 50mm Electronic Regulation of Pasteurizationprocess: Adjustment of heatingspeed (depends also on capacity of the steamboiler) Adjustment of pasteurizationtemperature Adjustment of required holdingtime on Pasteurizationtemperature Adjustment of switch-off temperature electronic Datalogger for Pasteurizationtemperature and Chambertemperature Aircirculation by High effective Stainless Steel Airblower Isdoclq Dqjpfx Aacstn Steaminjection in the Airchannel for opimized steammixing pneumatically actuated Steamvalve Kondensateoutlet on the bottom of the Chamber DN 70 4 pcs. adjustable Feets Steamconsumption: approx.:. 50 kg / H at 1 bar electric power consumption: 4kW 16A / 5pol. / 400V

Year of construction: 1997, condition: like new (used), Maximum temperature: 1290 °C Interior dimensions: 630 x 530 x 760 mm Electrical connection: 400 V kW Space required: 1200 x 870 x 1810 mm Weight: 470 kg Heating output: 16.5 kW Iedpfxet Ebpus Aacstn

Operating hours: 630 h, condition: excellent (used), Vötsch Model: VT 7018 Air-cooled temperature test chamber Only approx. 630 operating hours (read out)! Test chamber dimensions: Width 580 x Depth 450 x Height 750 mm External dimensions: Width 865 x Depth 1280 x Height 1780 mm Test chamber volume: approx. 190 liters Technical specifications for temperature tests: Temperature range: -70 °C to +180 °C Temperature deviation in steady state, according to IEC 60068-3-5 depending on the test chamber temperature temporal ±0.1 to ±0.5 K spatial ±0.5 to ±2.0 K Temperature change rate according to IEC 60068-3-5 Heating: 4 K/min. Cooling: 2.3 K/min. Itodpfx Aew Nqimsacen Thermal compensation max. 1000 W Tube port L1: DN 50 mm Tube port L2: DN 125 mm Tube port R1 R2: DN 125 mm Electrical connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 5.9 kW Rated current: 12 A Protection: 16 A time-lag, to be provided by customer Weight: approx. 460 kg net Refrigerants: R 404A and R 23 Important safety information for you as a buyer! The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See image) (Subject to change and errors in technical data!) We are happy to answer further questions by phone.

Year of construction: 2017, condition: excellent (used), functionality: fully functional, Chamber furnace with exhaust hood, very good condition. 12 months warranty - Max temperature: 1300 °C - Internal dimensions (W x D x H): 400 x 400 x 400 mm - Capacity: 60 liters - Separate main switch - 5-sided heating - Air supply and exhaust with dampers, electrically operated via Belimo actuators Itedpfxjtbq Eqs Aacsn - Supply air fan controlled by frequency converter via controller - Stainless steel exhaust hood - Bentrup 507 control system, thyristor control - Controller language: German only, cannot be switched to other languages - Additional drag element type S for external recording - Documentation included - Net weight: 250 kg - Power consumption: 18 kW - Current draw: 26 Amps - Connection voltage: 3/N/PE 400VAC - Connection type: prepared for fixed installation, 32 A plug Furnace has been overhauled, all switching electrical components are new. Supplied with warranty. We have several units of this furnace type in stock. Viewing by appointment. Furnace, furnaces, annealing furnace, industrial furnace, chamber furnace, kiln, enamelling furnace, tempering furnace, laboratory furnace, hardening furnace.

Year of construction: 2025, condition: new, functionality: fully functional, stainless steel construction for 2 Euro-Palettes with a loadinghight of 1500mm max 80 crates with 400 x300 x300mm L x B x H dimensions: widht: 2450mm height 2678mm lenght: 2050mm chamber dimensions widht: 2066 mm height: 1795 mm lenght: 1340 mm Thickness of Insulation 40mm Electronic Regulation of Pasteurizationprocess: Adjustment of heatingspeed (depends also on capacity of the steamboiler) Adjustment of pasteurizationtemperature Adjustment of required holdingtime on Pasteurizationtemperature Adjustment of switch-off temperature electronic Datalogger for Pasteurizationtemperature and Chambertemperature Aircirculation by High effective Stainless Steel Airblower Itedpfsclq Ixox Aacjn Steaminjection in the Airchannel for opimized steammixing pneumatically actuated Steamvalve Kondensateoutlet on the bottom of the Chamber DN 100 4 pcs. adjustable Feets Steamconsumption: approx.:. 80 kg / H at 1 bar electric power consumption: 5,5kW weight: approx. 650 kg

Condition: excellent (used), Weiss Model: WK3-600/70 Climate Test Chamber, Water-cooled Specifications for temperature testing: Temperature range: -70°C to +180°C Temperature change rate: Heating: 4.0 K/min Cooling: 2.5 K/min Isdpfxsw Nqhpj Aacjtn Temperature deviation: Temporal: ±0.1 to ±0.5 K Spatial: ±0.5 to ±1.5 K Heat compensation: max. 2500 W Specifications for climate testing: Temperature range: +10 to +95 °C Dew point temperature range: -3 to +94°C Humidity range: 10 to 98% r.h. Temperature deviation (temporal): ±0.1 to ±0.3 K Temperature deviation (spatial): ±0.5 to ±1 K Humidity deviation (temporal): ±1 to ±3% r.h. Temperature uniformity (spatial): ±0.5 to ±1.0 K Heat compensation: max. 500 W Test chamber volume: 600 liters Test chamber dimensions (H x W x D): 950 mm x 800 mm x 800 mm External dimensions (H x W x D): 1998 mm x 1000 mm x 1745 mm Feedthrough diameters: NW 125 mm and NW 50 mm Operating data: Nominal voltage: 3/N/PE AC 400V ±10% 50Hz Nominal power: 9.1 kW Nominal current: 19.0 A Refrigerant: R 452A & R23 Weight: 680 kg Important safety information for buyers! The following procedures are carried out on all chambers we offer prior to delivery: 1. Functional check and replacement of necessary components 2. If necessary, the chamber is refilled with refrigerant in compliance with applicable laws 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See image) (Specifications subject to change and possible errors!) If you have further questions, feel free to call us.

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Chamber furnace, very good condition. 12 months warranty. With pull-out base, fully refurbished. The furnace is not suitable for hot removal, but stress-relief annealing is possible! Tmax 1320°C Capacity: 330 liters Internal dimensions (W x D x H): 590 x 720 x 800 mm External dimensions (W x D x H): 930 x 1310 x 1840 mm Itodpfxju Tqzzs Aacen Controller: TC 707 (99 programs with 48 segments each) SIC plates on bogie hearth (new) 5-sided heating (new) Manual intake and exhaust damper (new) Load weight: 40 kg per 100 liters (total 132 kg with all plates etc.) Power: 22 kW 3/N/PE 400V AC CEE 32 A connection Documentation, CE declaration Refurbished / New Parts: Contactors, complete heating system, bogie hearth lined with lightweight refractory bricks, bogie hearth SiC plates, seals, manual intake and exhaust damper. Inspection at our facility by appointment. Call us! Furnace, furnaces, industrial furnace, chamber furnace, kiln, drying oven, tempering oven, laboratory furnace, ceramic kiln, hardening furnace.

Year of construction: 2018, condition: excellent (used), Chamber furnace, very good condition. 12-month warranty - Max temperature: 1300 °C - Internal dimensions (W x D x H): 400 x 400 x 400 mm - Separate main switch - 5-sided heating - Intake and exhaust air dampers, electrically operated via Belimo actuators - Intake air fan controlled by frequency inverter via controller - Door safety interlock - Stainless steel exhaust hood Itjdpfx Asr Izctjacsn - Jumo Dicon Touch controller with data logging, 10 programs with 50 segments each Language setting of the controller can be changed upon request! - Additional type S signal pick-off element for external data logging - Door hinged on the right, controls on the left - Documentation included - Net weight: 250 kg - Power consumption: 18 kW - Current draw: 26 amperes - Connection voltage: 3/N/PE 400VAC - Connection type: prepared for fixed connection, 32 A plug We have several units of this type in stock. Viewing by appointment. Furnace, ovens, annealing furnace, industrial furnace, chamber furnace, kiln, enameling oven, tempering furnace, hardening furnace, laboratory furnace