Used Cleaning for sale (6,662)

Condition: used, Year of construction: 2010, operating hours: 2,000 h, functionality: limited functionality, machine/vehicle number: ERW20101111, overall weight: 5,000 kg, wall material: steel, Cleaning line in good visual condition for sale. Specifics: Baths: 10x Bath dimensions(outer size): L2440xW590xH1190mm Additional stainless-steel baths: 2x Stainless-steel bath dimensions(size inner): L600xW600xH700mm Ventilation inlets for toxic fumes(between baths): 4x Control unit: 1x Crane with electric motor(in working condition): 1x Rails in working condition: 2x Guarding rail with steps: 8119x1000mm Pjdpfx Akexvxqdoiegu Water filter tanks: 2x Combined weight: 5t+ Additional: PVC pipes, stainless-steel mesh, circulation pumps, etc. Overall cleaning line length when assembled: 12050mm Overall cleaning line width when assembled: 4160mm Assembled drawings available. Cleaning line is and was purchased in non-operational state. Located in Latvia. Currently in disassembled condition - as is. Logistics are handled by potential buyer!

Condition: used, Year of construction: 2022, operating hours: 45 h, functionality: fully functional, operating pressure: 3,000 bar, fuel: electricity, Demonstration machine, Machine available immediately. Only used for demonstrations. Only 45 hours on the hour meter. Technical condition: like new. Pgsdexwb Egepfx Akiou Complete set: Robot + radio remote control + control unit + support winches. Operates with a 200 kW high-pressure pump (recommended by the manufacturer, but can be configured differently). Worldwide shipping available. Similar to, but better than: Vertidrive, Falch, Kamat, Robot PlusPlus. SPIDERJET® surface preparation devices — Whether cleaning, paint stripping, or de-coating large steel structures such as ships, tanks, or vessels, the SPIDERJET® surface preparation equipment delivers fast and clean results and, thanks to compact versions, can be maneuvered even through the narrowest areas. Minimal setup times ensure rapid deployment, and the use of high-pressure water without additives or chemicals protects the environment. High coverage rates and semi-automatic operation reduce working time and costs while increasing work safety.

Condition: used, This listing is for Ultrawave Ultrasonic cleaner The unit is in full working condition and ready for immediate use This ultrasonic cleaner cleans lab equipment safely using high-frequency sound waves. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Pgsdpfx Akjxwc Ngeiou Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: excellent (used), Year of construction: 2011, The 2-axis WP CNC-T cleaning machine is an excellent example of a device that combines a machine built on the basis of the most modern components with high efficiency and the most favorable price. This machine operates on the basis of linear motor technology (magnetic cushion), allowing for long-term operation of the device. The set of tools with which the machine is equipped allows for cleaning the most common PVC profiles on the market. The basic machine is a strong, stable frame made of structural steel. The control panel is equipped with a PC computer. Basic equipment: Working arm: The working arm is driven by a linear motor (no clutches, gears, racks, lead screws). The linear motor moves at a set distance from the magnetic strip - no friction!! Linear motors (for the "X" and "Y" axes) are numerically controlled. Air cushion the working arm weighing several dozen kilos during the movement in the "Y" axis is supported by a pneumatic actuator - it constantly supplies pressure of a fixed value, which balances the weight of the arm. This solution allows for the use of short working times without the need to expose the machine components to the risk of rapid destruction. Control panel Independent control panel with a PC computer The operator menu is described by function keys - ease of use in production conditions. from the control panel, you can easily make corrections to the outline of the profiles (it takes the operator about 1 to 2 minutes to make the correction) Other data: Automatic system for cleaning the working surface Automatic clamping and centering of the material Minimum and maximum height of the processed profile: 40 - 150 mm Minimum and maximum width of the processed profile: 40 - 130 mm Minimum size of elements: external 340x400 mm Pjdpfx Akowhu Hhsijgu VP - transport packaging BASIC SET OF UPPER AGGREGATES: working unit for tools for cleaning flat surfaces with a groove working unit for cleaning the surface of the glazing bead groove drilling unit for the gasket BASIC SET OF LOWER AGGREGATES: working unit for tools for cleaning flat surfaces with a groove working unit for cleaning the surface of the glazing bevel drilling unit under the seal ADDITIONAL SET OF LOWER AND UPPER AGGREGATES: working unit with a knife for cleaning flat surfaces without a groove working unit with a knife for cleaning flat surfaces without a groove

Condition: excellent (used), Year of construction: 2005, Very good technical condition of machine. Pjdpfx Aswh R Tkjkiegu

Year of construction: 2013, condition: excellent (used), Welding and cleaning line GRAF, year 2010 The direction of work from left to right Welder four-head SL4Q, max. welding dimension 2800 x 3200 mm, 0.2 mm flash, gasket formates Cooling station WPCNC4 4-axis cleaner with a turning station, equipped with knives for cleaning flat surfaces with a groove and smooth The line was servised in the end of 2022 y. with part replacement for over 10000 Euro (total cost of service). It is in very good condition. Currently is working. Pedovr U Syspfx Akiegu

Condition: not inspected (used), functionality: unexamined, Used Cleanroom Mobile Scaffold Two Platform Heights: ~1.29 meters ~2.29 meters With manual. Pgodpfx Aoxiv Hiskisu For indoor use only. Max 250kg per work platform.

Year of construction: 2025, operating hours: 1 h, condition: new, functionality: fully functional, - Laser slag cleaner for laser cutting machines - 1.1 kW motor - Video demonstrating working principle available Psdpfsx E Srcex Akiegu

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Year: 2006 - technically efficient, ready to work – after full service - 2 pneumatic motors (top + bottom) - disc cutter: 250 mm - 2 CNC axes - working height: 140 mm - profile recognition system - 2 burr removal knives (top + bottom) Pgedpfx Ajxz Ayyekisu - infeed/Outfeed table

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Sturtz fully automatic welding (2 machines x 4 head) and double head corner cleaning line - 1 x welder VSM40/26 Pgsdjvkdubopfx Akieu - 1 x welder VSM30/26 - 1 x handling with verticat transport system - 1 x tilting table - 1 x 2 head corner cleaner with drilling head's - 1 x outfeed table adjusted for Rehau Brillant/Euro70, Synego and Geneo the line is still in production, can be inspected in working conditions fully functional, very good conditions

Condition: used, Year of construction: 2019, operating hours: 196 h, functionality: fully functional, machine/vehicle number: W09D013KWKAD43636, operating pressure: 500 bar, total length: 2,910 mm, high-pressure hose length: 500 mm, total height: 1,770 mm, total width: 1,720 mm, pressure: 500 bar, empty load weight: 760 kg, fuel: diesel, heating capacity: 115 kW (156.36 HP), overall weight: 760 kg, water tank capacity: 300 l, fuel tank capacity: 70 l, power: 13 kW (17.68 HP), temperature: 95 °C, volume flow: 0.9 m³/h, noise level: 104 dB, pressure (max.): 500 bar, Equipment: chassis, crane, This well-maintained DYNAJET 500th 15 HELI hot and cold water high-pressure unit is available for immediate delivery. Manufactured in 2019 and having only 196 operating hours, the machine is in excellent condition and is being delivered fully serviced, fully functional, and ready for operation. Designed for demanding industrial cleaning applications, the DYNAJET 500th 15 HELI combines powerful cleaning performance with compact dimensions, low weight, and excellent mobility. With an operating pressure of up to 500 bar and hot water temperatures up to 95°C, the machine is ideally suited for removing heavy contamination, coatings, grease, and industrial residues. The unit is equipped with a reliable Kubota diesel engine, integrated hot water system, and a large 300-litre water tank for independent operation even where external water supply is limited. The trailer-mounted design ensures maximum flexibility and easy transportation between jobsites. To ensure many years of reliable operation, the machine will be supplied with a brand-new 50 m high-pressure hose. A turbo nozzle and standard flat-jet nozzle are included in the sale. Key features and advantages: * Year of manufacture: 2019 * Only 196 operating hours * Fully serviced before delivery * Fully functional and ready for operation * Maximum operating pressure: 500 bar * Flow rate: up to 15 l/min * Hot water temperature up to 95°C * Powerful Kubota 3-cylinder diesel engine * Integrated hot water system with high-performance burners * 300-litre integrated water tank Podjz Nd Ndspfx Akiegu * Approx. 70-litre fuel tank * Trailer-mounted unit with overrun brake * New 50 m high-pressure hose included * Turbo nozzle included * Standard nozzle included * Compact, robust and easy to transport *Ideal for industrial cleaning, surface preparation and professional service applications Please contact us if you are interested or would like to receive further information, pricing details, additional photos, or arrange a viewing of the machine. We will be pleased to assist you.

Condition: used, Year of construction: 2013, Overview This KOSME JETCLEAN G 16/960 1T UP is a rotary air rinser built in 2013. It cleans empty bottles and containers automatically before filling: the containers are turned upside down and blown out with filtered air through moving air nozzles, so loose particles and contamination are removed before the containers reach the filler. It suits bottlers who want a dry cleaning step for empty PET bottles ahead of filling. The containers are held in grippers on the rotating carousel and inverted for the air treatment. The machine is fully enclosed by transparent safety doors and is operated from a KOSME touch panel with production data and recipe management. It covers container formats from 400 g/ml to 2 kg at an output of up to 6,000 containers per hour; the format currently set up is a 2 L PET bottle, other formats via the available change parts. Technical data - Manufacturer: KOSME - Model: JETCLEAN G 16/960 1T UP - Year of manufacture: 2013 - Machine type: rotary rinser for empty containers, air blowing - Treatment medium: filtered air - Format range: 400 g/ml to 2 kg containers Psdpfx Ajz Et Utskisgu - Output: up to 6,000 containers per hour - Current format: 2 L PET bottle - Dimensions: approx. 2.5 x 2.5 m Equipment - Rotary carousel with container grippers and inverting section - Moving air nozzles for blowing out the containers - Transparent safety doors - KOSME touch panel with production screen and recipe management - Electrical documentation and wiring diagram Condition Used. The machine is still installed at the operator's site in Germany and can be inspected by arrangement. Availability Available after decommissioning in week 43 of 2026 (late October 2026). Location: Germany.

Condition: new, Year of construction: 2026, functionality: fully functional, fuel type: diesel, drive type: Diesel, High-pressure cleaner Pjdpfx Asz Hrryskisgu Condition: New Technical condition: New Description: New unit with a 12-month warranty.

Condition: used, Year of construction: 2011, operating hours: 8,176 h, functionality: fully functional, machine/vehicle number: WPUD500H0B2000955, operating pressure: 500 bar, total length: 3,650 mm, high-pressure hose length: 50,000 mm, total width: 2,070 mm, pressure: 500 bar, empty load weight: 1,630 kg, input voltage: 12 V, fuel: diesel, overall weight: 2,900 kg, water tank capacity: 1,000 l, fuel tank capacity: 50 l, power: 34.5 kW (46.91 HP), DGUV certified until: 10/2026, Dynajet 500TH 30 l/min Maximum pressure: 500 bar 8176 operating hours Psdpfjz Egw Uex Akijgu Regularly maintained, recently serviced, not in operation during winter (only April–October) Owned by the same operator since new For cold water only; can be retrofitted for heating water.

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 110 kg, usable tank capacity: 30 l, machine/vehicle number: DPF-995, Equipment: CE marking, TECHNOMAKS DPF-995 Professional Diesel Particulate Filter Cleaning Machine – 12V – Automatic – Test & Report Thanks to the TECHNOMAKS Mobile Diesel Particulate Filter Cleaning Machine, DPF cleaning can be easily performed on vehicles manufactured to Euro 5 and Euro 6 standards. It tests the fill level and performs cleaning without removing the diesel particulate filter. It easily removes soot and ash from vehicles through the oxygen temperature sensor and differential pressure sensors. It operates with a special cleaning fluid, water, and a generator, providing cleaning in a maximum of half an hour without removing the DPF filter. Using hydrogen-based chemicals, it dissolves soot, ash, and oil residues that have accumulated on the DPF and catalytic converter, and then removes them through the exhaust system with the help of water. After the liquid cleaning, a drying process is performed, and the cleaning process does not damage the DPF. It performs result-oriented measurement and cleaning operations on the vehicle. After the Diesel Particulate Filter Fill Level Test, the cleaning rate results can be reported on a receipt. Compared to other devices, it saves time because the DPF does not need to be removed. It offers DPF fill level testing and result-oriented operations. In terms of price/performance, it is more advantageous than other devices. Pgedsz D Hriopfx Akiou In workshop use, operations can be completed quickly without the need to send vehicles elsewhere.

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 110 kg, tank capacity: 10 l, machine/vehicle number: CARBON-973, Equipment: CE marking, It performs in-engine carbon and soot cleaning using hydrogen technology in all gasoline, diesel, LPG, and hybrid engine vehicles. It has a hydrogen gas production capacity of 1,500 liters per hour, and the gas duration can be adjusted as needed. It can clean engines up to 3,500 cc in diesel vehicles and up to 6,000 cc in gasoline vehicles. It operates with a 220V / 230V – 10 Ampere electrical infrastructure. Podpfx Akez D Sw Dsisgu It provides effective cleaning of air intake pipes, throttle body, injector nozzles, piston oil rings, intake and exhaust valves with their lower surfaces, piston surface, and the upper surfaces of intake valves. It helps to clean carbon and soot buildup in critical engine components such as MAF and MAP sensors, cylinder head air passages, EGR valve, turbocharger, and manifold. Without requiring disassembly and reassembly, it cleans in-engine soot and carbon deposits with high efficiency in a maximum of 1.5 hours. After an approximately 45-minute process, it supports engine performance and helps to achieve up to a 10% improvement in lost horsepower. It contributes to the optimization of fuel consumption, supporting the achievement of performance close to factory specifications. It offers an economical and efficient solution with a high price-performance advantage. It contributes to bringing exhaust emission values closer to ideal operating levels. It supports the engine running quieter, smoother, and with less knocking. It helps to reduce potential engine failures and maintenance costs caused by carbon buildup.

Condition: new, operating hours: 5 h, functionality: fully functional, control cabinet width: 800 mm, control cabinet height: 1,700 mm, input voltage: 400 V, input current: 16 A, type of input current: AC, Equipment: documentation/manual, Individual System L25-2203 cleanCABINET CL 100G-BRP Complete laser system for integration as individual components, consisting of the following modules: - Special item: Low-power laser production Laser system CL100G-BRP, diode-pumped laser Wavelength 1064nm, operating mode: pulsed (ns) Average laser power: P = 100 W +/- 3% Prepared for pilot laser, 19" rack-mount design Comparable to 2003836 Special configuration: 10m fiber length, extended pulses - 2D optics system Stamp 10 for LP lasers (CL12BRP-CL100BRP) Automated 2D optics with connection for back-reflection protection (BRP) and 90° deflection, max. working area: 120mmx120mm (=160mm)/290mmx290mm (F=420mm) Focus diameter depends on the focal length of the optics Included components: 2D optics system Stamp 10 90° connection Control electronics Cable set cleanSTUDIO/cleanCONTROL license for 2D optics (without axis system support) RTC - Focusing lens f=254, fully quartz, High grade, working area approx. 150mmx150mm Minimal focus shift - BG protective glass slide STAMP 10/14 F420 Quick-change slide for mounting on the Stamp14 with locking monitoring - Alignment laser for low-power lasers (LP) (CL12G-CL-500G) The alignment laser allows monitoring the beam incident point on the component surface. Installation in the beam source, coupling into the fiber transmission, wavelength = 660nm, power: P = 0.5 mW (min. 0.2mW, max. 1.0 mW) - Decentralized laser source housing W/L Housing for the CL100 beam source including air-water heat exchanger 2kW, see 3D-CAD file. - GS control cabinet 1-1600 (CL12G-CL100G) Update: 32m cable length Laser housing in control cabinet design, type 1/1600 for low-power laser systems (CL12G-CL100G) consisting of: cabinet frame with Rittal double-bit lock, structural powder coating, RAL 7035S, optional air conditioning Installed on heavy-duty rollers, braked, 250kg load capacity, Fiber/cable feed-through through the roof, power supply via Harting Han6, left side panel, safety circuit "Performance Level D", installation position of laser and fiber outlet variable, emergency stop, key switch for starting and main switch in the front door, tested according to DGUVV3 Dimensions: HxWxD: 1600x600x800mm requires operation visualization, cooling capacity adjusted to the ambient temperature at the installation location WITHOUT AIR CONDITIONING as it is only for accommodating HMI, PC and PL-D technology including PLD technology PLD item as plug-in module (see below or alternatively wired in the control cabinet - BG housing 19" 2U PLD PLD plug-in for safe shutdown of low-power laser systems, installed in 19" housing - 2U for use with laser systems - VS-OPT Ethercat copper (MP/HP 2D) Ethercat interface for mid and high-power (2D) systems - fieldbus interface - 2D interface - Ethercat copper - cleanSTUDIO protocol - IPC 19" 1U - Touch panel standard 17-inch with HDMI+DP-VGA Pgodpfx Aezl Slyekieu - Keyboard with trackball DE QWERTZ keyboard with trackball (DE)

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 6000 CNC KÖŞE TEMİZLEME MAKİNASI, - Conforms to CE standards - It is a semi-automatic CNC machine designed to clean the burrs formed after welding of PVC windows, sashes, door frames and other profiles welded at 90 angles. - The process of cleaning the bottom, top, and outer surface of the profile independent of each other7 - Touch screen panel - Easy memorization process - Comfortable user-adjustable processing speeds - Ease of writing the program of the profile to be cleaned thanks to the special program in the machine - NC control system with PLC unit - User y-z axes on a joystick wristwatch - Easy program creation and fine-tuning - Average processing time of the machine in one corner is 5-8 seconds - 400 - 500 frames can be cleaned in 8 hours of average operation - Unlimited program installation memory - Daily monthly production report dashboard - The machine has 2 servo and 1 Hertz motor - Ø200 mm Diamond tooth saw - All PVC profiles can make angles and radii and have circular interpolation motion - Providing comfort during movement by preventing scratching of profiles thanks to the front brush stand system Psdpfx Aksrbf R Tjiogu

Condition: new, Year of construction: 2022, functionality: fully functional, Start-stop automatic system with a 30-second after-run time Crankshaft pump with fully ceramic pistons and stainless steel valves, coarse dirt filter, pressure regulator valve. 70kW green boiler for increased efficiency >92% Low CO2 emissions, low CO emissions, Pgodpoz Sq Irofx Akisu Up to 18% fuel savings, low maintenance costs With electric preheating up to 40°C. Includes 10m high-pressure hose, stainless steel spray lance with high-pressure nozzle and swivel fitting, gun with swivel fitting. Pressure: 30-220 bar, Water flow rate: 180-960 l/h, Temperature control: 30-150°C Power consumption: max. 7 kW Voltage: 400V, 50Hz, max. 13A Speed: 1450 rpm Fuel tank: 50 liters Weight: 240 kg Dimensions: 119.8 x 72.6 x 115.2 cm

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 3520130500485, operating pressure: 150 bar, total length: 406 mm, high-pressure hose length: 15,000 mm, total height: 1,016 mm, total width: 406 mm, input voltage: 220 V, fuel: electricity, overall weight: 38 kg, pressure (max.): 165 bar, The Nilfisk Poseidon 3-30 XT is equipped with a hose reel and two high-pressure lances. Pjdszl Tu Aopfx Akisgu The integrated detergent injector and the suction hose on the rear of the unit enable quick and easy application of the detergent. The rotary knob for detergent dosage is located in the same position. Technical specifications: Pressure: max. 165 bar Cleaning performance: 3.0 Max. inlet temperature: 60 degrees Weight: 38 kg

Year of construction: 2025, condition: new, Small parts basket, washing basket for parts cleaning Pgjdpjd Innwefx Akieu Material: Stainless steel 1.4301, additionally electropolished Dimensions: L x W x H 400 x 200 x 170 (h) mm Mesh size: 5 x 5 x 1 mm with side-welded brackets including lid and closure Price excludes shipping Shipping costs €18.00 per basket in Germany and Austria Other dimensions (e.g., 600 x 400 x 170h mm) and designs available upon request.

Condition: used, Esta Eurosog W/H 80.299 Industrial Vacuum Cleaner As a powerful industrial vacuum cleaner, the EUROSOG-W is suitable for coarse, dry, fine, and free-flowing dust. The AC version is designed for occasional use in cleaning work in workshops. Its smooth-rolling wheels provide the industrial vacuum cleaner with high mobility. The spacious dust collection container has a capacity of 80 liters. Thanks to the patented tilting device, the dust can be disposed of effortlessly. Psdpjivdt Esfx Akijgu Application areas for the EUROSOG industrial vacuum cleaners: AC version for occasional use For dry, coarse and fine dust For cleaning machining equipment For general cleaning work (e.g. workshop floors) Can be used in many industries (e.g. wood and metal industry) Metal industry Construction industry Wood industry Chemical industry Printing industry Flocking industry Cleaning industry Craft sector Automotive industry Mechanical engineering Stone industry Paper industry Tobacco industry and many more Your benefits at a glance: Powerful industrial vacuum cleaner for dry dust Compact design Easy disposal of the dust collection bag Special features of the EUROSOG-W series: Manual brush cleaning Washable permanent filter cartridges, available for dust classes M and H Optionally available with M and H test certificates Patented, tilting filter housing Manufacturer: ESTA Absaugtechnik Type: Eurosog W/H 80.299 with TÜV test certificate, dust class "H" Vmax: 360 m³/h Vmin: 815 m³/h pumax: 180 mbar Filter area: 5m² Max. air volume flow: up to 500 m³/h 230 V Year of manufacture: 2006 Item weight: 81.00 kg RRP: €4,900 You can find more industrial vacuum cleaners in other sizes - new and used - in our shop! International shipping costs on request!

Year of construction: 1986, condition: used, functionality: fully functional, Equipment: documentation/manual, BVL Rotocleaner 750 This cleaning and degreasing system with a steam extraction fan and oil skimmer is in good used condition. Manufacturer: BVL Oberflächentechnik Pjdpfxswzwfgj Akisgu Year of manufacture: 1996 In 2011, the washing machine was completely overhauled, and the gear motor, heating element, gas spring, and heating system were replaced. Automatic basket washing system with a removable rotary basket. Basket diameter: 720 mm (internal diameter) Basket height: 140 mm (internal height) Max. usable height (workpiece): 450 mm Max. batch weight: 500 kg External dimensions: Width 1190 mm, Depth 1170 mm, Height 1170 mm. Weight: 290 kg Operating manual, technical documentation, and CE declaration of conformity for the system are available. The housing of the cleaning system and the associated pipelines are made of stainless steel. Cleaning is carried out using a special nozzle system with wide-angle nozzles and a driven rotary basket. A U-shaped spray system ensures ease of operation and high efficiency. The nozzles are supplied by a powerful circulation pump, which ensures intensive treatment and is equipped with a carbide mechanical seal. Heated tank in the lower part of the system. If the liquid level drops below a certain point, a fixed water connection ensures automatic refilling. This ensures safety for the heating elements and pump, as well as clean and precise dosing of the required amount of water. Internally located return baskets filter out coarse dirt from the cleaning solution. A vapor extraction system removes the steam before the hood is opened. The cover is supported by a gas spring. The filling system is very easy to use, enabling a fast workflow. Loading by crane is possible. Price: Negotiable Our asking price per unit is €1,990.00 net, ex works, plus packaging costs. All technical specifications are subject to typographical errors and omissions. Sale exclusively to countries within the EU.

Condition: used, SUN-TEC Type: Y9AT417 SUN-TEC cleanroom technology heating plate Podpfxozdqbqs Akijgu Cleanroom workstation with heating plate 1600 mm x 1200 mm x 2200 mm Rated voltage: AC 200V, 3 phases, 50Hz, 30A Max. temperature: 200°C Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), 626 USED Baking tray cleaning machine FRISCH SpritzMatic. Cleans using solutions or liquids. Equipped with a heating system. EXTERNAL DIMENSIONS (in cm): - W: 125 - L: 35 - H: 90 INTERNAL DIMENSIONS (in cm): - W: 103 - L: 29 - H: 69 TECHNICAL DATA: - power supply: 230V - power: 2.5 kW - operating temperature: 70°C Pjdpfxe Agc Ehe Akijgu The price is a net price. Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.