Used Ch2-30 for sale (58,780)

Condition: used, machine/vehicle number: 006082, Max. panel width: 1300 mm Dkedpewaymwefx Ahuow Max. panel length: 3000 mm Rotation system: double cone Rotation direction: from transverse to long

Year of construction: 1973, condition: good (used), guillotine shear with rear stop and stacker Dkjdpfx Ajgnywujhuew design: pendulum cut cutting length: 3.050 mm plate width: 1.000 mm plate thickness: 4,5 mm

Condition: good (used), Oil-water separation system, condensate separator, oil and water separator, oil separator, oil/water separator, air compressor oil-water separator -Manufacturer:BEKO, air compressor oil-water separator -Type: 30/0.8Mpa -Dimensions: Ø 360 x 1220 mm Dkodpfx Ajw S T Rxehuow -Weight: 24 kg

Condition: used, axle configuration: 3 axles, first registration: 05/2006, suspension: air, tire size: 385/65, color: other, Year of construction: 2006, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Disc brakes - Lift Axle = More information = Tyre size: 385/65 Dkjdpfexbthuex Ahusw Make axles: BPW Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle; Tyre profile: 40% Rear axle 2: Max. axle load: 40 kg; Tyre profile: 40% Rear axle 3: Tyre profile: 30% Serial number: YE5B331A639B40192

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, Hydraulic press brake PPBL 135/30 Year of construction 2000 Machine number 26938 Technical specifications Force 1350kN Working length 3050mm Distance between uprights 2250mm Stroke 110mm Distance table – ram 310mm Gap 200mm Width table 180mm Approach speed 100mm/s Working speed 8mm/s Return speed 65mm/s weight 6500 kg motor 7.5kW Voltage 3 x 380V Dsdpfx Ahew Hca Heuskw Oil-tank 120L Options inlcuded; • Back gauge with 2 fingers • Range of back gauge 600mm • 2 front supports of 300mm • Table with center slot Tooling included with machine; • D10.180.78.20 5x508mm • Multi-V M90 1x3050mm

Condition: used, Year of construction: 2013, operating hours: 471 h, Empty weight: 3.220 kg Lifting capacity: 300 kg Working height: 1.400 cm Serial number: HL11816-00-7306 Front tyres / undercarriage remaining: 30 Rear tyres remaining : 30 Tyre brand: - Transport dimensions (LxWxH): 2.49x1.65x2.69 Please contact PFEIFER GROUP for more information Dedpfswhuansx Ahuekw

Condition: used, machine/vehicle number: 006079, Max. panel width: 1200 mm Max. panel length: 3200 mm Dkjdpfx Ahou N Slvsuow

Year of construction: 2007, condition: used, Offer 22111 Technical specifications: - HADEF Type CH 2 hoist, built in 2007, load capacity 500 kg Dsdpsv S Du Rofx Ahuekw - Portal load capacity 500 kg - Hook height approx. 2450 mm - 2 lifting speeds 8.0 + 2.0 m/min - Manual trolley - Clearance between the traveling columns approx. 2750 mm - Clearance height at the bottom edge of the portal beam approx. 2900 mm - Mobile beam approx. 1500 mm - 4 swivel casters - Total width approx. 3050 mm - Total depth approx. 1500 mm - Total height approx. 3050 mm - 400 V drive - Total weight – crane + hoist approx. 250 kg

Year of construction: 2009, condition: used, IKA in-line homogenizer model DR2000/30 ATEX Year 2009. Dkedpfoxlng Hox Ahujw Motor 55 kW 1783 rpm. With frequency converter. With mechanical seal. Technical specifications Model: DR2000/30 Year of manufacture: 2009 Motor: 55 kW 1783 rpm. ATEX configuration.

Condition: used, axle configuration: 3 axles, first registration: 05/2006, suspension: air, tire size: 385/65, color: other, Year of construction: 2006, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Disc brakes - Lift Axle = More information = Dedpfxjxbthbe Ahujkw Tyre size: 385/65 Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle; Tyre profile: 40% Rear axle 2: Max. axle load: 40 kg; Tyre profile: 40% Rear axle 3: Tyre profile: 30% Serial number: YA5B331A639B40195

Condition: ready for operation (used), Hydraulic press brake LVD PPEB-EFL 220/30 CADMAN CNC Year of construction 2004 Serial number 28652 Technical specifications Force 2200kN Working length 3050mm Distance between uprights 2600mm Stroke 450mm Distance table – ram 685mm Gap 405mm Approach speed 100mm/s Working speed 9.5mm/s Return speed 110mm/s weight 16500 kg Dkjdpfx Ahjwcqpbjusw motor 22kW oil 350L Dimensions according drawing attached CADMAN CNC 2D graphic controller •Easy form laser EFL 130mm – W axe • Table PP8170 V-axe – table width 120mm • Wila hydraulic top tool clamping • LVD bottom tool clamping hydraulic • Back gauge DUO X X’ R Z1 Z2 (X 600mm) • Security; CE PP3580 – lasersafe PP5320

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 7,000 m/min, rapid traverse Y-axis: 7,000 m/min, rapid traverse Z-axis: 7,000 m/min, feed rate X-axis: 5,000 m/min, feed rate Y-axis: 5,000 m/min, feed rate Z-axis: 5,000 m/min, spindle speed (max.): 3,000 rpm, table width: 3,500 mm, table length: 1,000 mm, Correa A25/30 fixed bed milling machine with: - X-axis travel 3000 mm - Y-axis travel 1200 mm Dsdpfxsxc Uths Ahuokw - Z-axis travel 1500 mm - Heidenhain 426 CNC - Spindle nose ISO 50 - Sliding guards - Standard accessories Interest-free payment plan over 12/24 months

Condition: used, mileage: 224,000 km, power: 96 kW (130.52 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,400 kg, first registration: 11/2020, loading space length: 2,825 mm, loading space width: 1,230 mm, loading space height: 1,210 mm, emission class: euro6, color: white, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: Docking station (MyFord Dock), vehicle without vinyl floor covering in the loading/passenger compartment, 240 A generator, LED loading compartment light, smoker's package, sliding door in loading/passenger compartment on the left, start/stop system, fleece battery 80 Ah (AGM, 2 batteries) Dkodpfovralljx Ahujw Other equipment: Driver's side airbag, traction control (ASR), audio system: radio with USB and Bluetooth hands-free system, indicator light integrated in the exterior mirror, on-board computer, entry lights, electronic brake force distribution (EBD), electronic. Traction control, driver assistance system: hill start assist, driver assistance system: crosswind assist, lockable glove compartment, rear wing doors without glazing (opening angle 180 degrees), interior filter: pollen filter, body/structure: high-space box, body variant: medium-high roof, high loading space partition behind driver and front passenger, without window with through-loading option below, steering column (steering wheel) adjustable in height/length, truck registration, model update, engine 2.0 liter - 96 kW TDCi KAT, parking pilot system, parking pilot system front and rear, wheelbase 3300 mm, spare wheel in driving tires, low emissions according to Euro 6d-TEMP emission standard, leather gearshift/selector lever handle, windshield wipers with interval switching, adjustable, headlights H4, sliding door loading/passenger compartment on the right, mud flaps front and rear, visibility package 2, seat package 13: driver's seat (4-way adjustable) - passenger double seat, fabric, seat package 25: driver's seat (4-way adjustable) - passenger double seat - in velour, steel rims 6.5x16, bumper partially painted, style color package, daytime running lights LED, trend, tinted glazing, paneling in the loading/FG area: half-high, lashing rails on the side of the loading area, lashing eyes (8), heat-insulating glazing slightly tinted Cooling system: Special equipment: PHARMATRANSPORT Transcool Multitemperature system With 3-chamber -30C, +22C, +4C Auxiliary cooling 220V Payload: 700 KG Vehicle is in good condition!

Condition: good (used), Year of construction: 1992, machine/vehicle number: 20106, Offer 25100 Technical specifications: - Pressure capacity 200 t - Working width 3050 mm - Clearance between columns 2550 mm - Table width 180 mm - Throat depth 250 mm - Installation height 400 mm - Feed speed 80 mm/sec. - Working speed 6.7 mm/sec. - Retraction speed 67 mm/sec. - Ram stroke 150 mm - Adjustment range of fixed stops 120 mm - Drive 400 V 14.5 kW - Space requirement approx. W 3800 x H 2980 x D 1700 mm - Weight approx. 11500 kg - With: - Backgauge with 2 stop fingers Dkjdpfjwbgizex Ahusw - Deer foot tool - 4-way universal die - Two-hand control panel, foot switch

Condition: used, Year of construction: 2010, operation weight: 6,680 kg, Please submit inquiries exclusively by email or directly via Machineseeker. Dkodpfxjxmwnpo Ahuew

Condition: new, Year of construction: 2022, Fan new, year of manufacture 2022 Motor power 15 kW Volume flow 7783 m³/h Fan position GL 270 Total pressure increase 3502 Pa Dkjdpfjw I U Ttex Ahujw Connection 350 mm With star/delta starting and volt-free contact for start/stop: with Nestromat 15 kW star/delta control, control cabinet IP54 installed, including main switch. The control cabinet is prepared for the installation of further necessary control components as required by the overall system control; spare slots are available if needed. Technical data: • Three-phase network: 400 V • Maximum drive power: 15.0 kW - Y/Δ connection • Network frequency: 50 Hz • Ambient temperature: -15 to +40 °C • Control cabinet protection rating: IP 55 or 54 depending on version • Control cabinet: RAL 7032, powder-coated Weight 328 kg Availability: immediately Location: Flörsheim

Condition: used, Year of construction: 2021, New Filling Monoblock Bertolaso 30/30/4 – PET/Glass up to 6500 bph Notice: Brand NEW Bertolaso monoblock, never used. Zero working hours. Pristine condition. The perfect opportunity to purchase a new monoblock at a used price. This new Bertolaso 30/30/4 monoblock emerges as an advanced technological solution, specifically designed to optimize filling operations for syrups filling system. Manufacturer and Model: Produced by Bertolaso, a benchmark name in the industry, this monoblock stands out for its performance and build quality. The model specification, 30/30/4, combined with its production year, 2021, provides crucial information on its current relevance in the bottling solution landscape. Speed and Capacity: With a speed of 6500 BPH, this filling monoblock Bertolaso can handle both PET and glass containers, ensuring accuracy and consistency in the filling process. Rinser: The rinser is equipped with 30 grippers and offers a single treatment. Filler: With 30 valves and a high vacuum filling system, it guarantees accurate and uniform filling of containers. The mobile nozzle highlights the filling monoblock Bertolaso’s ability to adapt to various operational needs. Capper: The capper of the filling monoblock Bertolaso, with 4 heads, is versatile in handling different types of caps, both aluminum screw and press-on plastic. Its ability to handle caps of various sizes adds further flexibility to the monoblock. Additional Features: Operational safety is ensured by various integrated features. The clockwise rotation direction and the electrical data (V: 380 and Hz: 50) emphasize the attention to technical details. The filling monoblock Bertolaso comes with manuals, which are essential for operators and maintenance technicians. In conclusion, the filling monoblock Bertolaso 30/30/4 monoblock stands as a reference point for industry experts, combining efficiency, safety, and versatility. Its technical specifications speak for themselves, underscoring the importance of choosing technologically advanced solutions in the bottling arena.   TECHNICAL SPECS Product: syrups Bottles: 700 ml glass Alexanderflasche – Ø 70,1/72,1 x 291 H mm – drawing AZ-01.019.01-03 700 ml Flakon PET – Ø 68,5 x 272,5 H mm – drawing 1304-01-002 1000 ml Flakon PET – Ø 76 x 298,5 H mm – drawing 3041-01-006 Dodpfovgucbox Ahuokw 1000 ml PET – Ø 74 x 277,4 H mm – drawing 1709-01-003 700 ml glass Wodka – Ø 74,6/57,2 x 304,5 H mm – drawing 2807-02W1C 700 ml Vodka STD – Ø 74,6/57,6 x 304,6 H mm – drawing 2597S087  Maximum bottle diameter: 100 mm Minimum bottle diameter: 52±2 mm Maximum bottle height: 360 mm Minimum bottle height: 180 mm Minimum interior neck diameter: 18,5±0,5 mm (Ø 16 mm filling valve) Closures:      a) pilferproof aluminum screw cap – Ø 28 x H 18 mm on bottle n.

Condition: excellent (used), color: blue, Year of construction: 2005, Year of manufacture: 2005 Dimensions (L x W): 235 x 200 cm Part suitable for: trucks Technical condition: very good Visual condition: very good Damage: none Type number: 16051346 Serial number: 16051346 Contact Luc Schoefs or Germain Daenen for further information. Dodpew Rk Dtofx Ahuokw

Condition: used, Tempering oven ARTUR NOLZEN type TL30/30/50 Warm air oven, convection oven, heating cabinet Fabrication no. 14785 Year of construction 1996 Temperature range max. 750°C Dkedpfx Ahoq Ubqieuow Internal dimensions 300 x 300 x 480 mm Inner width at center bar 260 mm Connected load 6 kW Mains connection 400 Volt, 50 Hz - Temperature control NOLZEN type TRO t - 96 4 - THEBEN time control, type TR 635 top - Heating time to 750° C in approx. 95 min. Space requirement L x W x H 1300 x 1100 x 1400 mm Weight 310 kg good condition

Condition: new, neu ca. 8 Wochen ab Auftragse Spanien 6800 € 131.24 € 30 mm MK 3 250 mm 245 - 4000 U/min M25 400 mm 655 mm 1185 mm 280 kg 120 mm 100 mm 85 - 635 mm 1.195 mm 300 x 270 mm 600 x 380 mm ERLO(MADE IN SPAIN) FOR MANUFACTURING USE V-belt drive manual feed left-right drilling automatic tool ejector adjustable depth stop table with T-slots drill guard with micro switch lightening equipment user manual in English or GERMAN CE Djdpewiq N Ujfx Ahuskw Option: Variable speed incl. digital display (VE+TAK) € 1.310,--- Tapping device (IR/RS) € 810,-- Coolant equipment incl. T-slots in the ground plate (ERB) € 910,--

Condition: used, machine/vehicle number: 13276, Rotor diameter: 450 mm Rotor width: 300 mm Rotor blades: 9 Stator blades: 2 Inlet cross-section approx. 370 x 170 mm Drive motor: 45 kW Dkodpfxowikams Ahuew

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 0-201-22-4204, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Siemens, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,150 mm, workpiece height (max.): 80 mm, rotational speed (max.): 18,000 rpm, operating hours of spindle: 1,000 h, spindle motor power: 7,500 W, number of spindles: 1, number of slots in tool magazine: 12, input voltage: 380 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, Main spindle with C axis Djdpfxsxdxg Is Ahujkw

Condition: used, overall weight: 39,500 kg, axle configuration: 3 axles, first registration: 10/2014, Year of construction: 2014, Equipment: ABS, * Lift axle * Rear extension Dkjdpfx Aspxky Ishuew Errors and intermediate sale excepted Viewing by appointment only WhatsApp inquiries will not be answered

Condition: good (used), functionality: fully functional, Year of construction: 1992, operating hours: 2,900 h, - max. cutting length 3000 mm - max. sheet thickness for S235 13 mm - electric backgauge 1000 mm Dsdpjxcx U Nofx Ahujkw - good, clean condition - weight approx. 13,000 kg

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 Dsdpehmmfksfx Ahuekw - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition