Used Central Lubrication for sale (11,303)

Condition: good (used), mileage: 471,586 km, power: 390 kW (530.25 HP), first registration: 10/2021, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 4x2, wheelbase: 3,750 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,040 mm, total width: 2,550 mm, total height: 4,040 mm, Year of construction: 2021, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, parking air conditioner, parking heater, power mirror, retarder, seat heater, traction control, = Additional Options and Accessories = - 2nd Diesel Tank - Heated Mirrors - Carplay - Digital Tachograph - Driver's Log (Recording Device) - Fixed - Halogen Lamp - High Roof - Manual - Radio/Cassette - Lane Keeping Assist - Fabric - Central Lubrication - Auxiliary Braking System = Notes = Number of axles: 2, Configuration: 4x2, Unladen weight: 9083 kg, Gross vehicle weight: 21000 kg, Total tank capacity: 1070 liters, 2nd Diesel Tank, Height of fifth wheel coupling: 122 cm, Fifth wheel coupling: Fixed, Number of locks: 1, Central lubrication, Suspension type: Air suspension, Type of cabin: High roof, Cruise control, Driver's log (recording device), Digital tachograph, Air conditioning, Auxiliary air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/Cassette, Carplay, Color: White, Heated mirrors, Type of lighting: Halogen lamp, Lane keeping assist, Air conditioning, Seat heating, Bluetooth, Engine power: 390 kW (523 hp), Engine displacement: 16353 cc, Fuel: Diesel, Euro: 6, Transmission type: Opti-cruise, Transmission type: Scania, Gears: 12, Auxiliary braking system, Retarder brand: Scania, Power steering, ABS, ASR, Starter battery, Central locking, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual, Highline = Additional Information = Transmission Transmission: SCA, 12 gears, Automatic Axle Configuration Brakes: Disc brakes Axle 1: Tire size: 385/65R22.5; Steered; Tire tread depth left: 7 mm; Tire tread depth right: 9 mm; Suspension: Leaf spring suspension Axle 2: Tire size: 315/70R22.5; Dual tires; Tire tread depth left inside: 1 mm; Tire tread depth left outside: 2 mm; Tire tread depth right inside: 1 mm; Tire tread depth right outside: 1 mm; Suspension: Air suspension Rcsdjyagu Hjpfx Akieh Weights Unladen weight: 9,083 kg Payload: 11,917 kg GVW: 21,000 kg Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1 Financial Information Leasing price: €1,123 per month (standard, 72 months); Ask for more information and conditions Identification License plate: KLEYN1 = Company Information = Kleyn Trucks is one of the largest independent used vehicle dealerships in the world. Here you can choose from a constantly changing inventory of 1,200 used trucks, tractors, and trailers. Our range includes all European brands from various years and price ranges. Why buy from Kleyn Trucks? Simple! • Large and rapidly changing inventory • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send an inquiry via our website. Ask directly about our European warranty package.

Condition: used, mileage: 297,000 km, power: 294 kW (399.73 HP), first registration: 01/2020, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 7,720 mm, loading space width: 2,480 mm, loading space height: 2,190 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, tail-lift, We are very pleased that our offer has caught your interest and can already assure you that you will be able to purchase a good and reasonably priced vehicle with a verifiable service history from our company! Rjdpeyamknjfx Akioch MB ACTROS 2540 FULL COMBINATION with certified BÖSE curtain-sider swap bodies Rear load securing 2 x BÄR tail lifts 2,500 kg Steerable tag axle Retarder Special Equipment: Lockable overhead storage above the windscreen, front axle load 8.0 t, driver's side airbag, LED ambient lighting (driving and living area), Economy equipment package, Media equipment package, standard and DuoMatic brake couplings, Interactive multimedia cockpit, air horn, driver assistance system: turning assistant, driver assistance system: roll control assist, cab with air suspension, vehicle without trailer coupling, vehicle without front radiator grille, vehicle without front splash guard, vehicle without rear underrun protection, regulated alternator 150 A, 12-speed transmission - type: G 211-12, notebook holder, comfort telephony (Bluetooth) with inductive charging tray, 3-piece mudguards, 3-piece mudguards without splash guard, cool box/refrigerator, aluminium rims 9.00x22.5 (ALCOA matt), adjustable roof air deflector, 2-cylinder air compressor, reinforced engine brake, 7.5 t steered and liftable tag axle, wheelbase variant 4,900 mm, rear frame overhang 2,250 mm, residual heat utilization, retarder, acoustic reversing warning (external warning signal), tail lift switch, reinforced rear cross member, fleet management interface, velour upholstery/passenger seat, velour upholstery/driver seat, cab seats: armrests both sides passenger seat, cab seats: driver comfort suspension seat, external sun visor, side window roller blind driver's door, external left storage compartment, additional 12V / 15 A socket in passenger footwell, additional 12V socket, 24V / 25 A socket in passenger footwell, 24V socket in right storage compartment, automatic daytime running light, pre-installation for central axle trailer coupling, pre-installation for 4 surround cameras (display via monitor), sleeper cab curtain, additional thermal insulation Further Equipment: Emission standard EURO 6, axle configuration: 6x2, Actros 5, Actros L cab, heated front/start-off mirror, 2-line trailer brake, connections on the left, 24V / 15-pin trailer socket, exhaust outlet to vehicle center, Powertrain 2 equipment package, MirrorCam exterior mirror camera, 220 Ah battery, batteries mounted side by side, rear axle differential lock, air connection in cab, steel air reservoirs, air unit with condensate monitoring, medium air unit, automatic activation of driving lights (light sensor), driver assistance system: Attention Assist (fatigue detection sensor), driver assistance system: Autonomous emergency brake assist (Active Brake Assist 5), driver assistance system: Lane Keeping Assist, cab: fixed entry, cab: chrome interior package, cab: hydraulic tilting mechanism, cab: L StreamSpace, 2.30 m, tunnel 320 mm, vehicle perimeter LED lights, full air suspension, electric windows, vehicle without rear window, speed limiter, AdBlue tank 60 litres, rear axle with active lubrication, unregulated, rear axle crown wheel 440, chassis/body: chassis, lower comfort bunk, central locking system, fuel tank: 290 litres aluminium, left, electronically regulated steering pump, multifunctional steering wheel, air su...

Condition: used, Year of construction: 2002, CNC Milling machine PMER type S120 Rodpfx Akjz Nx Eysiech Travel X: 1200 mm Travel Y: 630 mm Travel Z: 600 mm Numerical Command ANILAM 5300 (Defective ANILAM screen changed by a PC screen + PC keyboard) Cone: BT 40 Spindle speed: from 50 to 6000 RPM Table size: 1600 x 500 mm Year of construction: 2002 Maxi distance spindle nose/table: 730 mm Mini distance spindle nose/table: 130 mm Diameter of the spindle sheath : Ø 150 mm Pneumatic tool clamp Central lubrication Lubricant pump Voltage: 380 V Width: 2300 mm Depth: 3600 mm Total height: 2600 mm Weight: approx 4,5 T

Condition: good (used), mileage: 924,670 km, power: 316 kW (429.64 HP), first registration: 10/2018, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 5,940 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2018, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, parking heater, power mirror, seat heater, traction control, = Additional options and accessories = - Heated mirrors - CarPlay - Digital tachograph - Driver's card (recording device) - Fixed - Halogen lamp - Manual - Space Cab - Lane departure warning system - Fabric - Central lubrication = Notes = Number of axles: 2, Configuration: 4x2, Payload: 11706 kg, Tare weight: 7794 kg, Gross vehicle weight: 19500 kg, Total tank capacity: 845 liters, Saddle coupling height: 113 cm, Saddle coupling: Fixed, Number of locks: 1, Winch pulling capacity: 255 tons, Central lubrication, Suspension type: Air suspension, Type of cab: Space Cab, Cruise control, Driver's card (recording device), Digital tachograph, Air conditioning, Auxiliary heater, Electric windows, Electric mirrors, CarPlay, Color: Multi-colored, Metallic, Heated mirrors, Lighting type: Halogen lamp, Lane departure warning system, Air conditioning, Seat heating, Bluetooth, Engine power: 316 kW (424 Hp), Number of cylinders: 6, Engine capacity: 12902 cc, Fuel: Diesel, Euro: 6, Transmission type: AS-Tronic, Transmission type: ZF, Gears: 12, Power steering, ABS, ASR, Central locking, Number of seats: 2, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual = Additional information = Transmission Transmission: ZF, 12 gears, Automatic Axle configuration Brakes: Disc brakes Axle 1: Tire size: 385/65R22.5; Steered; Tire tread depth left: 3 mm; Tire tread depth right: 5 mm; Suspension: Leaf spring suspension Axle 2: Tire size: 315/70R22.5; Double tires; Tire tread depth left inside: 4 mm; Tire tread depth left outside: 4 mm; Tire tread depth right inside: 3 mm; Tire tread depth right outside: 4 mm; Suspension: Air suspension Rcsdjzzwktopfx Akioh Weights Unladen weight: 7,794 kg Payload: 11,706 kg GVW: 19,500 kg Interior Number of seats: 2 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Identification License plate: 96-BLH-2 = Company information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands, from various years of manufacture and price ranges. Why buy from Kleyn Trucks? It's simple! • Large and rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Inquire directly about our European warranty package.

Condition: used, Year of construction: 2013, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 4,000 rpm, table width: 1,000 mm, table length: 3,700 mm, spindle motor power: 28 W, SORALUCE TA-A 35 CNC milling and boring center, equipped with a HEIDENHAIN iTNC 530 HSCI numerical control system, an automatic milling head, and a 40-position tool changer. Technical specifications Manufacturer: SORALUCE Model: TA-A 35 Year: 2013 Numerical control: HEIDENHAIN iTNC 530 HSCI Longitudinal travel X: 3,500 mm Vertical travel Z: 1,250 mm Transverse travel Y: 1,200 mm Table dimensions: 3,700 × 1,000 mm Spindle power: 28 kW Spindle speed: 20 to 4,000 rpm Spindle torque: 479 Nm Spindle taper: ISO 50 / DIN 69871 A Rapid traverse rates: 25,000 mm/min Machine weight: approximately 18,500 kg Equipment and options Automatic milling head with 2.5° × 2.5° indexing Automatic 40-tool changer, with horizontal and vertical tool change HEIDENHAIN control with HR 410 electronic handwheel M&H 20.41-MULTI workpiece measurement system HEIDENHAIN TT 140 tool measurement probe Longitudinal chip conveyor Transverse chip conveyor Protective enclosure with access doors 3D thermal compensation Redpfx Akez Nhzdoiech Automatic centralized lubrication Preparation for the integration of a CNC dividing head

Condition: good (used), mileage: 467,835 km, power: 350 kW (475.87 HP), first registration: 03/2009, fuel type: diesel, tire size: 385/55-R22.5, axle configuration: 6x2, fuel: diesel, fuel tank capacity: 650 l, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: steel-air, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2009, Equipment: ABS, AdBlue, Bluetooth, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), navigation system, onboard computer, power assisted steering, power mirror, retarder, traction control, trailer coupling, = Additional Options and Accessories = - Aluminum fuel tank - Rear work lights - Front work lights - Heated mirrors - Leaf spring suspension - Brake booster - Windshield - Speed limiter - Cab - Air conditioning - Refrigerator - Air suspension - Air-suspended seats - Radio/CD player - Spare tire - Rearview camera - Sleeper cab - Sun visor - Stability control - Auxiliary heating system - Immobilizer - Power take-off (PTO) - Central lubrication system - Tow hitch = Notes = 2009 MERCEDES-BENZ ACTROS 2644 L 6x2 Euro 5 + AdBlue with only 467,835 km, RETARDER, EPS with 3 pedals, MEILLER RK 20.70 TS hooklift (20,000 kg), GARMIN navigation + rearview camera, 2x bed, refrigerator, air conditioning, drawbar, trailer coupling, unladen weight: 11,510 kg, max. total weight: 26,000 kg, front axle tires: 385/55-R22.5 (tread depth left: 10 mm; tread depth right: 11 mm), middle axle tires: 315/70-R22.5 (tread depth left: 8/10 mm; tread depth right: 8/4 mm), rear axle tires: 385/55-R22.5 (tread depth left: 4 mm; tread depth right: 7 mm), Belgian registration with valid inspection until 26.02.2027. = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 11,946 cc Axle Configuration Brakes: Disc brakes Front axle: Tire size: 385/55-R22.5; Max. axle load: 8000 kg; Steered; Tire tread depth left: 60%; Tire tread depth right: 65%; Suspension: Leaf spring suspension Rear axle 1: Dual tires; Max. axle load: 11500 kg; Tire tread depth left inner: 60%; Tire tread depth left outer: 50%; Tire tread depth right inner: 25%; Tire tread depth right outer: 50%; Suspension: Air suspension Rear axle 2: Lift axle; Max. axle load: 7500 kg; Tire tread depth left: 25%; Tire tread depth right: 45%; Suspension: Air suspension Weights Unladen weight: 11,510 kg Payload: 14,490 kg GVWR: 26,000 kg Functional Body brand: Mercedes-Benz Actros Maintenance, History, and Condition APK (Technical Inspection): valid until 02/2027 Rodpfx Ajz H T Ezjkisch Technical condition: very good Optical condition: good Further Information Please contact Arne Honingh for further information.

Condition: used, maximum load weight: 23,920 kg, overall weight: 33,000 kg, axle configuration: 2 axles, first registration: 03/2025, next inspection (TÜV): 04/2027, total length: 13,820 mm, total width: 2,600 mm, total height: 4,000 mm, Year of construction: 2025, 2-AS FLOWER SALE HEIWO COOLING/HEATING FLAP SIDE DOOR, LIKE NEW Structure: Refrigerated/Freezer/Insulated, Flower Sale Heiwo Make and model of chassis: Heiwo LPRS 18 Cooling: Carrier Vector 1550. Year of manufacture 2014. 9,140 operating hours. Heating: Yes, Ebersprächer hydronic hot air heating system Tail lift: Dhollandia 2,500 kg under-mount lift Date of first registration: MOT valid until: 04/2027 Dimensions (L x W x H): 1360 x 250 x 284 cm (internal dimensions) Required height of trailer coupling plate: 95 cm Unladen weight: 9,080 kg Payload: 23,920 kg Permissible total weight: 33,000 kg Suspension: Air suspension Number of axles: 2 Axle make: SAF axles with disc brakes Steering axle: Yes, Tridec. Tie rod steering Tire size: 445-45-19.5 Rims: Alcoa DuraBrights Tire axle 1: Tread depth left: 50%, Tread depth right: 50% Tire axle 2: Tread depth left: 70%, Tread depth right: 70% Additional features: 1360 mm internal length thanks to angled front edges, 10 Danish transport carts can be loaded lengthwise, fully insulated body from HEIWO, Carrier Vector 1550 refrigeration unit, Ebersprächer Hydronic heating system, sales rails recessed in the side wall, roof window, manual steps and side door, computer connections in the body, reversing camera, 4 separate batteries with charger for the body, Dhollandia 2500 kg tail lift, various additional lights, the last axle is steered (Tridec), central lubrication, 10-ton SAF axles with disc brakes. The semi-trailer is in like-new condition. Immediately available and ready for use. LIKE NEW SALES TRAILER IMMEDIATELY AVAILABLE AND READY FOR USE Further information: * Tire size | First axle: 445/45 R19.5 * Tire tread depth inside left | First axle: 50% * Tire tread depth inside right | First axle: 50% * Maximum axle load | First axle: 9000 kg * Tire size | Second axle: 445/45 R19.5 * Tire tread depth inside left | Second axle: 70% * Tire tread depth inside right | Second axle: 70% * Maximum axle load | Second axle: 9000 kg * Price on request: Yes * Position | First axle: Rear * Brake type | First axle: Disc brakes * Suspension | First axle: Air suspension * Lift axle | First axle: Yes * Alloy wheels | First axle: Yes Rjdpfxjz If Tgs Akiech * Position | Second axle: Rear * Brake type | Second axle: Disc brakes * Suspension | Second axle: Air suspension * Alloy wheels | Second axle: Yes Further equipment: * Alcoa rims * Homepage * Tail lift * Alloy wheels * Steering axle * Lift axle * SemCollection * SemStars * Central lubrication Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please inform yourself in advance about the costs and procedures in your respective country Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to changes, prior sale and errors.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Tool milling machine Kunzmann WF4/3 with Heidenhain TNC 320 control system, in very good condition, CE-compliant, from a training workshop! Technical data: >> Year of manufacture 2008, machine no. 347139 >> Fixed angular table >> Speed: continuously variable up to 4500 rpm >> Feed rate continuously variable in 3 axes from 0 to 2000 mm/min >> Rapid traverse X and Y axis 5000 mm/min >> Z axis 4000 mm/min >> Travel distances X/Y/Z: 400/350/400 mm >> Table surface: 650 x 350 mm >> Table load: 250 kg >> Quill stroke vertical: 60 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic clamping system >> Weight approx. 1800 kg >> Space requirement approx.: 2.3 x 2 x 2 m >> Drive power: 15 KVA Accessories and equipment: >> Heidenhain TNC 320 control system >> Hydraulic clamping, vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual for the control system and programming examples >> Handwheels >> Coolant system (not shown in the pictures) Rjdoz Eh Tqepfx Akijch About the machine: Offered is a Kunzmann WF4/3 tool milling machine with a Heidenhain TNC 320 control system. This universal milling machine is in very good condition and has only a few operating hours. It comes from a company where it was only used for training purposes. It has a very easy-to-use control system. Furthermore, the machine has hydraulic clamping in both vertical and horizontal positions. Changing from vertical to horizontal is very easy by folding down the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Kunzmann on site while it is powered up. There are 5 identical Kunzmann WF4/3 milling machines available from a vocational school. The machines are available immediately.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Tool milling machine Kunzmann WF4/3 with Heidenhain TNC 320 control system, in very good condition, CE compliant, from a training workshop! Technical data: >> Year of manufacture 2008, Machine No. 347142 >> Fixed angular table >> Speed: continuously variable up to 4500 rpm >> Feed rate continuously variable in 3 axes from 0 to 2000 mm/min >> Rapid traverse X and Y axis 5000 mm/min >> Z axis 4000 mm/min >> Travel distances X/Y/Z: 400/350/400 mm >> Table surface: 650 x 350 mm >> Table load: 250 kg >> Vertical quill stroke: 60 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic clamping system >> Weight approx. 1800 kg >> Space requirement approx.: 2.3 x 2 x 2 m >> Drive power: 15 KVA Rjdpfoz Eh T Dex Akioch Accessories and equipment: >> Heidenhain TNC 320 control system >> Hydraulic chuck, vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual for the control system and programming examples >> Handwheels >> Coolant system (not shown in the pictures) About the machine: Offered for sale is a Kunzmann WF4/3 tool milling machine with a Heidenhain TNC 320 control system. This universal milling machine is in very good condition and has only a few operating hours. It comes from a company where it was only used for training purposes. It has a very easy-to-use control system. Furthermore, the machine has hydraulic chucks for vertical and horizontal operation. Changing from vertical to horizontal operation is very easy by folding down the vertical head. The guideways are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Kunzmann on-site with power connected. There are 5 identical Kunzmann WF4/3 milling machines available from a vocational school. The machines are available immediately.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Tool milling machine Kunzmann WF4/3 with Heidenhain TNC 320 CNC control in very good condition, CE-compliant, from a training workshop! Technical data: >> Year of manufacture 2008, Machine No. 347140 >> Fixed angular table >> Speed: continuously variable up to 4500 rpm >> Feed rate continuously variable in 3 axes from 0 to 2000 mm/min >> Rapid traverse X and Y axis 5000 mm/min >> Rapid traverse Z axis 4000 mm/min >> Travel distances X/Y/Z: 400/350/400 mm >> Table surface: 650 x 350 mm >> Table load: 250 kg >> Quill stroke vertical: 60 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic clamping system >> Weight approx. 1800 kg >> Space requirement approx.: 2.3 x 2 x 2 m >> Drive power: 15 KVA Rcodpfoz Eh Uzsx Akish Accessories and equipment: >> Heidenhain TNC 320 CNC control >> Hydraulic chuck vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual for the control and programming examples >> Handwheels >> Coolant system (not shown in the pictures) About the machine: Offered is a tool milling machine Kunzmann WF4/3 with a Heidenhain TNC 320 CNC control. This universal milling machine is in very good condition and has only a few operating hours. It comes from a company where it was only used for training purposes. It has a very easy-to-use control. Furthermore, the machine has a hydraulic chuck in both vertical and horizontal positions. Changing from vertical to horizontal is very easy by folding down the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take the opportunity to inspect and test the Kunzmann on site while it is powered up. There are 5 identical Kunzmann WF4/3 milling machines available from a vocational school. The machines are available immediately.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 35,000 h, travel distance X-axis: 1,140 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 810 mm, controller manufacturer: MITSUBISHI, controller model: M720 SSS, table load: 850 kg, spindle speed (max.): 15,000 rpm, number of axes: 5, This 5-axis Pinnacle BX300A was manufactured in 2012. It features a spindle speed of 15,000 rpm, a table size of 1300 × 610 mm, and a 24-position tool magazine. Equipped with a Mitsubishi M720VS control system, it supports complex machining with continuous rotation on the C-axis and tilting on the B-axis. Consider the opportunity to buy this Pinnacle BX300A vertical machining centre. Contact us for more information about this machine. Additional equipment • Air blast through spindle • Rotary table with counter-support and hydraulic lock – 360° rotation • Heidenhain linear scales on X, Y, Z axes; rotary encoders on A and C axes • Coolant through spindle, 20 bar + low-pressure cooling system • Renishaw OMP60 workpiece probe + receiver // Renishaw TS27R tool probe • Chip flushing system • Chain-type chip conveyor • Telescopic covers for X, Y, Z axes • Full machine enclosure with safety door lock • Central lubrication system with oil cooler Machine Benefits Qualitative Machine Benefits • Condition: very good, low operating hours • Ready for tests Technical Machine Benefits • B-axis (tilting head): –120° to +120° • C-axis (rotary table): 360° continuous rotation • 24-position drum-type tool magazine Rcedpfx Aksz Ea Sxeijh • Table size: 1300 × 610 mm Extra Information Additional equipment Work area lighting Signal tower Air and coolant guns MPG handwheel Electrical cabinet cooling with air conditioner Temperature control system for spindle and ball screws Coolant oil separator Maintenance tool set

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Electrics 3x400V 50 / 60Hz - Gimbal-mounted 5-axis electrospindle 12 kW (S6) HSK F63 - 24,000 rpm - ceramic bearings incl. liquid cooling with infinitely height-adjustable extraction hood - electric-motor controlled - full rated power at approx. 12,000 rpm - speed: 1000 - 24000 rpm - drive: 3-phase HF motor, inverter-controlled - direction of rotation: clockwise/counter-clockwise - 2 controlled compressed-air connections - interface for aggregates - tool weight (rotating): 6 kg - max. saw blade Ø 350 - spindle cooling: liquid cooling - extraction hood infinitely variable - Profit H350 16.30: CNC machining centre in gantry design (without tool) with digital drives (driven on both sides). The machine column of the Profit H350 16.30 is made of thick-walled, electrically welded rectangular tubes. The steel ribbing inside the column achieves high stability. - Machining field H350 16.30: Travel of the axes: X = 4000 mm Y = 1970 mm Z = 455 mm Working field: X = 3000 mm Y = 1500 mm Z = 150 mm clearance height Axis positioning speeds: depend on the selected safety system (these can be found in the layout). - Travelling gantry driven on both sides - Guide system X axis: The travelling gantry of the X axis is driven via a rack with inclined, crowned tooth form - This guarantees highest precision. The reduction gear ensures highest machining quality and repeat accuracy. The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. - Guide system Y axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Y axis is positioned by means of a ground recirculating ball screw. - Guide system Z axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Z axis is positioned by means of a ground recirculating ball screw. - Automatic central lubrication: The grease is delivered in a controlled manner to the guide carriages of the X, Y and Z axes as well as to the recirculating ball screws in Y and Z. The lubrication process is carried out automatically after a specified time. Rcsdpfx Akozlbpboish - 12-position linear tool changer on the left of the machine column incl. a pick-up position for aggregates: The 12-position linear changer ensures shortest changeover times and offers sufficient space for milling tools. One aggregate change position (fitting variants see layout) Max. tool diameter 250 mm Max. tool length 240 mm - Drilling head DH 18 6H 1S: Vertical 12 spindles: 7 spindles in the X direction and 5 spindles in the Y direction. Horizontal 6 spindles: 4 spindles in the X direction and 2 spindles in the Y direction. Forward stroke = 70 mm max. drill length = 70 mm and shank D = 10 mm. All spindles are individually driven and selectable. 1 grooving saw – in the X direction max. saw blade diameter 120 mm max. blade thickness 5 mm max. speed infinitely variable up to 7500 rpm. The drilling group covers the entire working field both horizontally and vertically. - Controlled central extraction connection: Via the program control, either the drilling head or the milling spindle is extracted. This controlled slide gate achieves an optimised extraction performance. Connection diameter see layout - 6 workpiece supports: With front and rear...

Condition: used, Year of construction: 2014, Used Machine Year of Manufacture: 2014 Features and Technical Specifications: - X-axis working range: 3,740 mm - Y-axis working range: 1,570 mm - Z-axis travel: 350 mm - 4th axis: available - 5th axis: 5-axis spindle, 12 kW motor Rjdozlbp Uepfx Akisch - with additional locking mechanism for the C-axis - Tool change stations: 24 with turret changer; 10 on the left side of the machine column - Vertical drilling spindles: 12 - Machine table: cantilever table - Automatic table positioning: available - 6 e-motion workpiece supports - Special workpiece clamping system for frames - Software: FORMAT 4 WOOD FLASH, TPA ALBATROS - 2 machining areas for alternating setup - With automatic central lubrication - With mobile control console featuring a PC monitor - With air conditioning for the control cabinet - With a 90 m³/h vacuum pump - With handheld control unit - Includes: 12 frame clamps, 8 large and 4 medium suction cups

Condition: used, Year of construction: 2022, operating hours: 4,800 h, Equipment: ABS, all wheel drive, Volvo L 150 H wheel loader Year of manufacture: 2022 Rcedpfezhrckjx Akijh The machine is in very good condition and has only 4,800 operating hours. Air conditioning, Central lubrication system Tires have approximately 85% tread remaining.

Condition: used, mileage: 104,388 km, color: green, Year of construction: 2019, For inquiries regarding the vehicle, Mr. Seidel will be pleased to assist you (contact number on request). Rcsdpfeymi H Ejx Akieh Faun Tadano 70G-4 8x8 Mobile Crane 5,161 operating hours, 1,511 winch hours, counterweights: 1t, 2x 2.0t, 2.3t, 3.5t, load chart: see images, 2x air conditioning, 2 seats, auxiliary heater, radio, automatic transmission, cruise control, engine brake, ABS/ESP/ASR, refrigerator, heated mirrors, electric mirrors, differential lock, transmission reduction, retarder/intarder, halogen headlights, additional side work lights (left and right), crane, daytime running lights, beacon lights, shunting coupling, central lubrication, tire tread depth: 1. Axle 23–24mm, 2. Axle 24–25mm, 3. Axle 9–22mm, 4. Axle 7–12mm On request, we can provide you with a leasing or financing offer. Mr. Seidel (phone number on request) will be happy to assist you. For further information, please visit our homepage. ... Subject to errors, changes, and prior sale! ABS, ESP, auxiliary heater, crane, EBS, retarder/intarder Cab type: local transport = Further Information = Intended use: Construction Unladen weight: 48,000 kg Please contact Tobias Ebert for more details.

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 1,600 mm, travel distance Y-axis: 810 mm, travel distance Z-axis: 700 mm, controller manufacturer: FANUC, controller model: 21i-MB, total height: 3,100 mm, total width: 2,500 mm, table load: 2,000 kg, overall weight: 13,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 24, product length (max.): 4,300 mm, number of axes: 3, This 3-axis SPINNER MVC-1600 was manufactured in 2006. It features an impressive X-axis travel of 1,600 mm, Y-axis travel of 810 mm, and Z-axis travel of 700 mm. The machine includes a robust table size of 1,800 × 810 mm and a maximum table load of 2,000 kg. If you are looking to get high-quality machining capabilities, consider the SPINNER MVC-1600 vertical machining centre we have for sale. Contact us for further details. • Table size: 1,800 × 810 mm • Rapid traverse (X/Y/Z): 18 / 18 / 15 m/min • Electrical supply: 3/PE ~ 400 V, 50/60 Hz • Rated current: 50 A Rsdpsz Rzqnjfx Akijch • Machine dimensions: approx. 4.3 × 2.5 × 3.1 m • Operational status: dismantled, not under power Additional equipment • E.A.-tronic Super 3 central lubrication unit • Habor heat pipe heat exchanger (Model HPM-35AR) • Coolant hoses/piping system installed Technical Specification Taper Size SK 40

Condition: repair required (used), Year of construction: 2019, operating hours: 6,725 h, Equipment: Base version DW 3060-F "Büffel" Redpfx Aoy D Nicskioch Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting in accordance with EC directive 50 mm EC towing eye incl. slip-on shoe Hydraulically adjustable support leg Splash guards (inner and side mudguards) Permissible total weight 25,000 kg Tyres: 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 320 kW at 2,000 rpm, complies with EUROMOT IV emission standard Auxiliary hydraulic connection 20 l/min Hydraulic pre-equipment for traction drive Fuel tank 2 x 300 litres Roller length 3,000 mm, diameter 600 mm Trapezoidal teeth for roller (21 pcs) and tooth bar (22 pcs) – Size L (174 mm, armored) Rear conveyor: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic center section Discharge conveyor: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24V electrical control system Roller reversal via electric motor when engine is stationary Automatically reversible cooling fan Chassis with level control Acoustic start-up warning Doppstadt telematics system Paint finish: RAL 2011 deep orange Optional equipment: Hydraulic traction drive Auxiliary hydraulic connection 70 l/min Radio remote control Overband magnet for rear conveyor Frame for overband magnet Moistening system Delivery date upon agreement

Condition: excellent (used), Year of construction: 2021, EMCO E350, SIEMENS 828D, 10,000 RPM 3-axis CNC milling machine with integrated 20-position tool magazine. Rjdpfx Akez Nm A Tjisch Control: SIEMENS 828D Spindle: Speed: 10,000 RPM Spindle power: 7 kW Torque: 41 Nm Tool holder: SK30 ISO7388-1 (DIN 69871) Pull stud: ISO7388-3 (DIN69872 Type A) Travel: X=350mm, Y=250mm, Z=300mm Spindle nose to table distance: 120-420mm Rapid traverse X, Y, Z: 24 m/min Table: Cast iron table with T-slots Number - Width - Pitch: 5 - 12 - 45 Clamping area: 520 x 300 mm Maximum table load: 100 kg Tool changer: Drum magazine with 20 tool positions Tool change time (tool to tool): 2.5 seconds Coolant: Standard pump 3.5 bar Work area lighting: Via 1 halogen spotlight Standard equipment: o Central lubrication o Thread cutting without collet o Spindle blow-out device for cleaning the tool holder during tool changes o Coolant tank 140 liters o Vibration-damping leveling feet o Mounting angles and heavy-duty anchors Year of manufacture: 2021 Machine No. Q4A211601 Includes: Control language: Italian NC handwheel, portable Fastening material ET420/345/332 E45/65 MT45/65 Leveling element FK03/NBR05/NBR9014 Heavy-duty anchor FH18x80/50 B M12 Fastening material High-pressure coolant system 50Hz Coolant gun Warning light, LED, 3-way, side-mounted E350 Operating manual / ITALIAN

Condition: good (used), functionality: fully functional, Year of construction: 2017, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control system: Basic Rexroth IndraMotion MTX Laser power: 3000 watts Rsdsz Rl Hyepfx Akijch Standard equipment: Machine - Closed machine frame - Hybrid axis system - Linear magazine with 20 slots for clamping jaws and tools - Drives with maintenance-free three-phase motors - Follow-up device with programmable clamping beam - Foot pedal for clamping jaw closure - Beam protection - Dividing chute on the right - Part flap on the left - Sensor for part flap - Work area lighting - FocusLine - Protective tool TRUMPF Laser - Solid-state laser TruDisk 3001 with one laser beam cable (LBC) output - LBC according to standard layout (10 m) - Laser power control - Laser logbook function - Enclosed beam guidance via laser beam cable (LBC) The TruDisk laser is subject to international export control. According to EC Dual-Use Regulation 428/2009 (lasers covered under 6A005). Compact cutting unit - Solid-state laser compact cutting unit - Protective glass - Collision protection - ControlLine Punch head - Delta Drive - Rotatable mono-tool holder - Programmable clamping beam position - Tool length compensation - Spray lubrication for the punch - Scrap extraction - Forming function - Stroke counter for the punch Control system - TRUMPF control system based on Rexroth IndraMotion MTX - Touch panel with 19'' TFT color display - Integrated technology data - Programmable cutting gas pressure - Teleservice interface via Internet - Automatic shutdown including wake-up function - Program management - Production plan Data transfer - USB interface - RJ45 network connection - Central Link Safety - CE marking - Multi-beam light curtains - Protection against scattered radiation Extended laser equipment - Copper cutting package - Brass cutting package Extended punching equipment - MultiTool function - MultiBend function - Thread forming function with thread counter - Signing/fast beading function - Engraving function - Deburring and rolling technology function - Adaptive stroke calibration - Spray lubrication for the die and level monitoring - Smart Punch Monitoring Part removal - Integrated sorting function for dividing chute - Sensor for dividing chute - Container track for 4 standard containers - Containers supplied by the customer Special sheet metal processing - Brush tables - Loading and unloading aid for brush tables Options Compact dust collector - CO2 extinguishing system for the compact dust collector Data transfer - Wireless operation point SheetMaster Compact 2500x1250mm (AK05) - Suction frame - Unloading trolley for scrap grid and microjoint sheets - Loading station with spreader magnet for separating sheets - Double sheet detection - Vacuum sensor - 2nd operator station for loading and unloading - Compact installation (double-wing swing doors) - Peeling system

Condition: ready for operation (used), Year of construction: 1995, input voltage: 400 V, number of axes: 5, number of slots in tool magazine: 24, controller manufacturer: BWO, MAKA HC 57 R (Robot) CNC Machining Center 5-Axis Type HC-57 R / Machine No. 420 747 / Year of manufacture 1995 / Circuit diagram no. 320 177 The machine is operational and exceptionally robustly constructed (milling spindle, tool changer, vacuum pump, support, etc.) and equipped with existing electronics (control unit, circuit boards, transformer). Rodpez R Dqqjfx Akijch It shows age-related wear in areas such as wiring, pneumatic lines, central lubrication lines, etc. It runs and is ready for operation, but due to the above-mentioned wear, it is being offered as a source of spare parts or for refurbishment. Collection from 41334 Nettetal, workshop edge. Price negotiable. If no buyer is found for the assembled, complete machine, the machining center will be dismantled. The spare parts will then be offered individually. Interested parties in MAKA spare parts can contact us in advance regarding details or spare parts inquiries.

Condition: repair required (used), Year of construction: 2013, functionality: unexamined, machine/vehicle number: GM 5251/01-01 NEU 4541/01-08 ALT, travel distance X-axis: 550 mm, travel distance Y-axis: 655 mm, travel distance Z-axis: 685 mm, feed rate X-axis: 90 m/min, feed rate Y-axis: 75 m/min, feed rate Z-axis: 90 m/min, nominal power (apparent): 58 kVA, torque: 197 Nm, total height: 3,100 mm, total length: 4,000 mm, total width: 2,700 mm, table width: 1,300 mm, table length: 800 mm, table load: 1,070 kg, rotational speed (max.): 8,000 rpm, overall weight: 15,000 kg, spindle motor power: 25,000 W, spindle mount: MK 0, number of spindles: 2, number of slots in tool magazine: 72, tool length: 300 mm, tool diameter: 160 mm, tool weight: 8 g, input voltage: 400 V, type of input current: AC, Equipment: rotational speed infinitely variable, GROB G320EA22K – CNC Double-Spindle Horizontal Machining Center, 4 Axes The machine is stored in Hamburg. No CE marking, as it was originally intended for use in China. For sale is a GROB G320EA22K CNC horizontal machining center with two spindles and 4-axis machining. The machine is equipped with a Siemens 840D sl control system and is suitable for precise and efficient machining in industrial production. Technical data: Manufacturer: GROB Machine type: G320EA22K Machine type: CNC horizontal machining center Control system: Siemens 840D sl Number of axes: 4 Number of spindles: 2 Spindle distance: 550 mm Spindle manufacturer: Kessler Max. spindle speed: 8,000 rpm Spindle power: 20 kW (S1) / 25 kW (S6) Rcsdpfsz R Upfjx Akieh Spindle torque: 159 Nm (S1) / 197 Nm (S6) Tool holder: HSK-A63 Tool magazine: 2 × 49 slots (98 tools) Max. tool diameter: 86 mm / 160 mm with limitations Max. tool length: 300 mm Max. tool weight: 8 kg Tool change time chip-to-chip: 2.7 seconds Travel distances X/Y/Z: 550 × 655 × 685 mm Rapid traverse X/Y/Z: 65 / 55 / 90 m/min NC rotary table: Ø 800 / 1,300 mm Max. workpiece weight on the rotary table: 1,070 kg Rotary table speed: 25 rpm Positioning accuracy of axes: 0.006 mm Repeatability of axes: 0.004 mm High-pressure coolant system: 80 bar Coolant temperature control: available Filter fineness: 30 µm Machine dimensions (L × W × H): approx. 4,000 × 2,700 × 3,100 mm Machine weight: approx. 15,000 kg Installed power: 58 kW Compressed air requirement: 15 Nm³/h at 5 bar Additional equipment: Fully enclosed machine Closed-loop control of the axes Temperature monitoring and water cooling of the spindles Automatic tool changer Tool cleaning system Central lubrication for guides and ball screws Automatic, reversible high-pressure coolant filtration No CE certification, as it was originally intended for use in China.

Condition: used, Year of construction: 1987, Technical details: x-travel: 760 mm y-travel: 450 mm z-travel: 500 mm control: Mazatrol CAM M-2 tool changer with: 30 tools (Kettenmagazin) Plätze spindle taper MT: ISO 40 Revolution per minute: 28 - 4500 U/min. feed speeds infinitely variable: X/Y/Z: max. 2.000 mm/min max. torque on the spindle: ca. 23 Nm rapid traverse:: X / Y: 24 m/min rapid traverse:: Z: 15 m/min. bore capacity in steel (diameter): Ø 40 mm table-size: 500 x 1150 mm table load capacity - central/maximum: 700 kp total power requirement: 11 kW (24,4 kVA) kW Weight approx.: 6,8 t dimension machine xH: 3,7 x 2,5 x 2,6 m chip conveyor: L: 3,7 x B: 0,75 x H: 1,35 m ATC tool magazine for 30 tools up to Ø 100mm x 330mm, SK40 Hinged belt chip conveyor Knoll-120S-1 with ejection height of 1130mm Coolant tank with pump, 200liter capacity, 30 l/min. Operation via control panel with boom 2000mm. accessories: cooling lubricant pump Base plates Rsdpfx Asvc Avbekisch *

Condition: used, Year of construction: 1996, Technical details: x-travel: 2500 mm y-travel: 560 mm z-travel: 600 mm control: TNC 426 CA bore capacity in steel (diameter): 400 cm³/min Max. Milling-capacity: 400 cm³/min tool changer with: 34 Plätze Tool pull-in force: 12 kN spindle taper MT: SK 40 spindle throat: 580 mm Revolution per minute: 20...7500 steples U/min. max. torque on the spindle: 210 Nm distance spindle nose and table: 0 - 600 mm feed:: X/Y/Z = 1 - 24.000 steples mm/min. rapid traverse:: X/Y/Z = 24 steples m/min feed power: X/Y = 6 kN und Z = 8 kN kN table-size: 3300 x 500 mm table load capacity - central/maximum: 2500 kp interface: ja total power requirement: ca. 43 kW Weight approx.: 14,4 t dimension machine approx.LxWxH: 3,05 x 5,6 x 3,0 m dimension swarf conveyor LxWxH: 6.6 x 0,6 x 1,3 m Rodpfx Akovad Hpoiech VERTICAL DRILLING AND MILLING CENTER in travelling column design. with integrated coolant supply link belt chip conveyor MAN+HUMMEL with cooling water tank and pump cooling lubricant treatment ALLWEILER AG, size L:1550 x W: 1000 x H:1200mm; filter belt width 500mm; pressure 30bar Hydraulic unit Machining area can be partitioned, partition wall available *

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 6234-3, drilling capacity: 40 mm, total length: 3,490 mm, quill stroke: 200 mm, total height: 2,950 mm, total width: 1,800 mm, table length: 1,800 mm, spindle speed (max.): 2,800 rpm, table width: 600 mm, type of input current: AC, overall weight: 2,900 kg, column diameter: 195 mm, input voltage: 400 V, input frequency: 50 Hz, distance table to spindle center: 705 mm, spindle motor power: 5 W, table height: 900 mm, distance table center to spindle nose: 95 mm, input current: 25 A, • Work table 1800 x 600 mm with 4T slots • Arm travel distance 1050 mm • Drilling spindle SK 40 with tool clamping device • Stepless speed programming Redpsz R Rv Refx Akioch • Stepless quill feed via three-phase servomotor • 2 T-slots 18 mm on the machine base at the rear • 2 T-slots 18 mm on the machine base on the left • Thread cutting device • Central lubrication • Coolant system • CE marking • Includes attachments as shown in the photo

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 530 022, type of input current: three-phase, input voltage: 400 V, Manufacturer: Deckel Maho Type: FP1 Aktiv-Digital – Heidenhain TNC 123 - 2102 Serial number: 530 022 Technical data • Control system: 3-axis Aktiv linear control Heidenhain TNC 123 • Lubrication: Automatic central lubrication system • Working area (X x Y): 300 x 260 mm (with a vertically adjustable milling head) • Clamping surface (rigid angle table): 600 x 210 mm • Max. table load: 200 kg • Spindle speed: 40 – 2,000 rpm (high-torque direct drive with 8 gear stages) • Feed drive: Infinitely variable digital drive • Main spindle drive: High-torque, pole-switching three-phase brake motor • Measuring system: Direct position measuring system via glass scales in all axes (X/Y/Z) • Positioning accuracy: 0.005 mm • Table slots: 4 pieces of 12H7 slots at a distance of 45 mm Description For sale is a highly precise and versatile tool milling machine DECKEL FP1 in the popular Aktiv-Digital version. The machine is characterized by its compact design, extreme reliability and highest precision in tool, prototype and fixture construction. Highlights & Control System: • Heidenhain TNC 123: Very easy-to-use 3-axis digital display with active positioning (incremental chain measurement and absolute linear measurement). The control system has 20 programmable reference points. • Automatic central lubrication: For minimal maintenance and optimal wear protection, this machine features the valuable upgrade of an automatic central lubrication system. • Central operating convenience: All machine functions, such as infinitely variable feed rate, rapid traverse, motor brake on/off, spindle start/stop and coolant, are clearly arranged directly on the swiveling control panel. • Ergonomics: Mechanical, manual safety handwheels with scale ring in all axes ensure a sensitive response. Additionally, a handwheel scale for fine positioning and a linear scale as a coarse scale are installed. Flexibility in machining: • Vertical milling head: The head can be swiveled by ±90° and can be positioned precisely using a scale. An integrated quick-lock allows it to be quickly and precisely aligned vertically again. • Horizontal machining: The milling head is simply swiveled by 90° and moved backward. • Drilling quill: The vertical spindle has an integrated clamping mechanism and can be extended manually up to 60 mm for drilling operations. Safety: • The machine is equipped with an additional, easily accessible emergency stop button directly on the housing for optimal work safety. Condition & Accessories • Condition: Very good, well-maintained and ready for immediate use. Includes wiring diagram. Rcsdpfxjz Sqq To Akioh