Used Central Lubrication for sale (11,889)

Condition: ready for operation (used), Filtration surface: 2x 18.5m², output: 2x 1100l/min, operating temperature: 27°C, connected load: 90kW, with documentation. Ksdpfoh N St Uex Ag Usll

Condition: refurbished (used), PRICE ON REQUEST! > used & tested completely overhauled, all wear parts renewed - completely measured - gear backlash axle 4 - 0,02 WM axle 5 - 0,02 WM axle 6 - 0,01 WM - Central hand readjusted - Endurance test 8 hours at 100 % load - Delivery in a special box (insured shipping) Klodpfx Asg A Itqjg Ujl - Central hand in exchange (without exchange on request) - Gearbox overhaul of axles 1-6 - 12 months warranty - 18 months possible for extra charge IMMEDIATELY more than 100 central hands in stock, different models. Just ask! Also an express overhaul of your KUKA central hand possible - from delivery 48 - 72 hours. In addition, we also offer the repair of ABB wrists.

Condition: refurbished (used), KUKA wrist ZH 210/240 Foundry - used & tested completely overhauled, all wear parts updated - completely confused Kodpfx Asgz Tcijg Usll - Operation game Axis 4 - 0.02 WM Axis 5 - 0.02 WM Axis 6 - 0.01 WM - KUKA wrist new adjustment - Long test 8 hours at 100% load - Delivery in a special box (protected shipping) - Central trade in exchange (without exchange on request) - Transmission recovery of axles 1-6 - 12 months value added 18 months possible on an extra charge possible On stock more than 100 central hands on stock, various models. Ask a question! Also a express overhaul of your KUKA Central Handheld - From delivery 48 - 72 hours. In addition, we also repair the ABB handgelenke.

Condition: as good as new (ex-display), PRICE ON REQUEST! - as good as new - completely measured - gear backlash axle 4 - 0,01 WM axis 5 - 0,015 WM Kljdpjg A Iucjfx Ag Usl axle 6 - 0,01 WM - Central hand readjusted - Endurance test 8 hours at 100 % load - Delivery in a special box (insured shipping) - Central hand in exchange (without exchange on request) - Gearbox overhaul of axles 1-6 - 12 months warranty 18 months possible for extra charge IMMEDIATELY more than 100 central hands in stock, different models. Just ask! Also an express overhaul of your KUKA central hand possible - from delivery 48 - 72 hours. In addition, we also offer the repair of ABB wrists.

Condition: refurbished (used), PRICE ON REQUEST! - used & tested completely overhauled, all wear parts renewed Ksdpfx Ageg A Iuyo Ujll - completely measured - gear backlash axle 4 - 0,02 WM axle 5 - 0,02 WM axle 6 - 0,01 WM - Central hand readjusted - Endurance test 8 hours at 100 % load - Delivery in a special box (insured shipping) - Central hand in exchange (without exchange on request) - Gearbox overhaul of axles 1-6 - 12 months warranty 18 months possible for extra charge IMMEDIATELY more than 100 central hands in stock, different models. Just ask! Also an express overhaul of your KUKA central hand possible - from delivery 48 - 72 hours. In addition, we also offer the repair of ABB wrists

Year of construction: 2021, condition: new, PRICE ON REQUEST! - NEW - unused - completely measured - gear backlash axle 4 - 0,005 WM axis 5 - 0,005 WM axle 6 - 0,005 WM - Central hand readjusted - Endurance test 8 hours at 100% load - Delivery in a special box (insured shipping) - Central hand in exchange (without exchange on request) - Gearbox overhaul of axles 1-6 Kljdog A Ivdepfx Ag Usl - 12 months warranty 18 months possible for extra charge IMMEDIATELY more than 100 central hands in stock, different models. Just ask! Also an express overhaul of your KUKA central hand possible - from delivery 48 - 72 hours. In addition, we also offer the repair of ABB wrists

Condition: refurbished (used), PRICE ON REQUEST! - 5 x used & tested completely overhauled, all wear parts renewed - completely measured - gear backlash axle 4 - 0,02 WM axle 5 - 0,02 WM axle 6 - 0,02 WM - Central hand readjusted - Endurance test 8 hours at 100 % load - Delivery in a special box (insured shipping) - Central hand in exchange (without exchange on request) - Gearbox overhaul of axles 1-6 - 12 months warranty 18 months possible for extra charge Kjdpjg A Iv Eofx Ag Uoll IMMEDIATELY more than 100 central hands in stock, different models. Just ask! Also an express overhaul of your KUKA central hand possible - from delivery 48 - 72 hours. In addition, we also offer the repair of ABB wrists.

Condition: used, KUKA AG Central Hand KR360 R2830, 00226914, ZH 360 4 Model: 00226914 Type: ZH3604 Condition: Used Ksdpow Ex Idsfx Ag Uoll General information: Robotic wrist / Axis group 4-6 Heavy-duty, precise subunit for the hand axes A4, A5 and A6 Serial number: 003296 Paintwork: KUKA standard paint (orange, similar to RAL 2003) Suitable for: KUKA KR 360 R2830 Removed from Kuka KR360 R2830 Without oil (drained)

Condition: used, Year of construction: 1995, functionality: fully functional, machine/vehicle number: LE2005CL 9506394, For sale: Two lathes We are selling two used lathes: --- 1. Padovani LABOR E200 Electronic (Year of manufacture: 1995) This cycle-controlled lathe is fully functional and can be tested on site. Perfect for precision turning in your workshop. Technical data: Center height: 200 mm Ksdev Nkhrepfx Ag Uell Center distance: 1,000 mm Swing over bed: 400 mm Swing over cross slide: 220 mm Spindle passage: 51 mm Spindle speed: 0 - 3,000 rpm Main motor: 5.5 kW Machine dimensions (L×W×H): 2,700 × 1,000 × 1,800 mm Weight: approx. 1,800 kg The machine is in operation and ready for use. Inspection and testing can be arranged by arrangement. --- 2. Chevalier FCL-2580F (Year of manufacture: 2006) This machine has been dismantled due to a new investment and is therefore sold in its current condition. The buyer is responsible for transport and loading onto a truck. Technical data: Swing over bed: 630 mm Swing over cross slide: 400 mm Max. turning diameter: 630 mm Center distance: 2,000 mm Spindle speed: 37 - 2,250 rpm Spindle nose: D1-8, alternatively A2-11 Spindle passage: 85 mm (D1-8), alternatively 105 mm (A2-11) X-axis travel: 280 mm Z-axis travel: 1,850 mm Rapid feed X-axis: 5,000 mm/min Rapid feed Z-axis: 8,000 mm/min Tool holder: Manual 4-station turret, tool holder 25 mm Tailstock quill diameter: 75 mm Quill stroke: 190 mm Taper: MT#5 Main motor: 15.5 kW Machine dimensions (L×W×H): 3,840 × 1,905 × 2,235 mm Weight: approx. 4,200 kg --- Important information: The buyer is responsible for transport and loading. Both machines can be viewed on site by appointment. For more information or a viewing, please contact us. You are welcome to contact us!

Condition: excellent (used), functionality: fully functional, Central conveyor system consisting of: 1. Piovan type F44/2 vacuum pump 2. 10 Piovan material conveyors Kljdpowg H R Nofx Ag Uel 3. 2 Piovan type LYBRA V coloring devices

Condition: used, CENTER HEIGHT 800 MM DISTANZA OF THE CENTERS 3000 MM MAX DIAMETER TURNABLE ON BED 1570 MM MAX TURNABLE ON THE CARRIAGE 1120 MM BED WIDTH 700 MM WEIGTH ADMIT BETWEEN CENTERS 6000 KG SPINDLE SPEED 8 - 350 mm SPINDLE BORE 102 MM TAILSTOCK : DIAMETER QUILL 135 MM STROKE 300 MM NOSE ATTACHMENT 80 METRIC MOTOR POWER 25 HP PLATFORM 1200 MM DRO HEIDENHAIN 2 AXIS SQUARE TOOL TURRET RAPID FEED Ksdpfjrzt Haex Ag Usll PROTECTIONS ON THE SPINDLE AND GUIDES

Condition: new, Harmonic 4B grease no. 2 is perfectly suited for exceptionally long service life and operation within a wide temperature range from -10°C to +70°C. For robots, gearboxes. Top-quality lubricating grease. Klsdoxluyyopfx Ag Usl

Condition: new, Year of construction: 2024, functionality: fully functional, spindle bore: 105 mm, New parallel lathe Brand ADRIA Model CS 6250 DTPC: 2000x 250 mm Year 2024 Condition New Useful turning length 2000 mm Height of centers 250 mm Width of guides 390 mm Bar passage 103 mm Turning diameter on the bed 500 mm Turning diameter without recess 710 mm Recess length 240 mm Spindle attachment Cam Lock DIN ISO702-2 N.8 Rapids on the carriage Threads Metric - inches - D.P. Motor and Kw 7.5 Equipped with: Self-centering chuck simple guide with 3+3 reversible jaws, fixed tailstock, brake and emergency stop pedal, Mobile steady rest, Fixed steady rest (MM 120-260) Klodpfx Aswq El Teg Ujl And with rear casing, removable chip collection tank, Tool coolant system, halogen lamp, electromagnetic brake pedal with double lever, Type C turret with n. 5 tool holders 2-Axis height display (included) Documentation: Instruction book and CE Certificate

Condition: excellent (used), Year of construction: 2010, I sell the complete aspiration system ELBH Klederft Aijpfx Ag Uel 5x Ventilator 7,5kW Total power apprx. 45.000 m3 / hr. Recuperation system for returning the hot air back Full system of dust extraction hoses. pneumatic pads, safety elements included in price. Year 2010 Possible to sell immediately only as a complete set.

Year of construction: 2000, condition: excellent (used), I sell the complete aspiration system ELBH 2x Ventilator 15kW Total power 21.000 m3 / hr. Recuperation system for returning the hot air back Full system of dust extraction hoses included in price. Year 2000 Possible to sell immediately only as a complete set. Kledpfx Asim Ex Neg Ujl

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2026, • Tous nos produits sont conçus avec soin et couverts par une garantie d'un an ! • Formation à l'installation et à l'exploitation gratuite. Les centrales à béton fixes de la série COMPACT offrent des solutions pratiques et efficaces pour satisfaire tous les niveaux de besoins. Les installations de centrales à béton stationnaires allient une capacité maximale et une efficacité optimale. La série COMPACT garantit un fonctionnement aisé et une efficacité optimale tout en maintenant des coûts abordables. De plus, cette usine utilise de manière précise les ressources de l'entreprise, ce qui se traduit par un gain de temps qui se transforme en revenus accrus. SPÉCIFICATIONS TECHNIQUES: Modèle: COMPACT 110 Capacité de production: 100 m3 Type de malaxeur : Malaxeur à double arbre – 2 m3 Tremie agrégé: 4 x 20 m3 Ciment pesant: 900 kg Additifs pesant: 40 kg Pesage de l'eau: 700 lt Silo à ciment en option. COMPACT-110 se compose de : • Trémie de stockage d'agrégats • Trémie de pesée d'agrégats • Convoyeur de pesée d'agrégats Kodpexvw H Refx Ag Ujll • Convoyeur de transfert d'agrégats • Malaxeur à double arbre • Châssis du malaxeur, plates-formes de marche, échelle • Trémie de pesée d'eau • Trémie de pesée de ciment • Trémie de pesée d'adjuvant • Compresseur d'air • Convoyeur à vis pour le ciment • Silo à ciment boulonné • Filtre supérieur, soupape de sécurité et accessoires • Salle de commande avec climatisation • PC et système d'automatisation • Panneau de commande et d'alimentation POUR PLUS D’INFORMATIONS, N’HESITEZ PAS A NOUS CONTACTER!

Condition: excellent (used), CTS 3G C 400* - Superheated water boiler with manual wood waste feeding Thermal output: 400,000 kcal/h. Pressure: 4 bar. Superheated water temperature: 150°C. Control thermostat, safety thermostat, thermometer. Fuel: wood waste Smoke exhaust: cyclone, forced-draught fan, connecting ductwork Steaming chamber net capacity: 100 m³/batch DVK-I 100 m³ - 1 unit, 8.5 x 9 m x h 4.3 m Control system: Baschild Italy Sliding door Oxyvent overpressure system Stainless steel tanks and radiators on 3 sides Includes turnkey connections from boiler to steaming chamber and a complete boiler room with distributor, collector, pumps, expansion vessel, etc. Klodpfxew Ev Twe Ag Uel

Condition: ready for operation (used), Romanian Lathe SN 1800x3000 Manufacturer Uppetrom 1 MAY Chuck diameter 1800 mm Max swing over bed 1800 mm Length between centers 3000 mm Max swing over slide 1450 mm Ksdjv Uaufepfx Ag Uoll Max weight of work piece between centers 25,000 kg Movie with machine underpower available

Condition: good (used), Year of construction: 2007, Motan Centralconveying control Metronet Light für 8x Abscheider year: 2007 price: 3.750 € Klodporun Sdefx Ag Uel contact: Mr. Rainer Eckerle

Year of construction: 2003, operating hours: 10,600 h, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 6094, Equipment: centralized greasing system, Spare parts carrier! Kledpfx Agex Uwrgo Uel TECHNICAL DETAILS Coarse screen deck: 120/150 Fine screen deck: 10/25 MACHINE DETAILS Generator voltage: 400 V / 50 Hz Engine operating hours: approx. 10,600 h EQUIPMENT Trailer Hopper Magnetic drum medium fraction conveyor Magnetic drum oversize fraction conveyor Slip-on shoe Hydraulic rear support Direct connection Central lubrication Generator 50 mm towing eye Note: The engine starts but shuts down after a while, probably due to a fuel supply issue. The generator produces electricity. The machine is currently not roadworthy as it has been stationary for quite some time. Road registration is currently not possible.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 7,599 h, functionality: fully functional, machine/vehicle number: MM0018-000095, turning length: 1,540 mm, turning diameter: 760 mm, spindle bore: 86 mm, travel distance X-axis: 630 mm, travel distance Y-axis: 1,585 mm, TECHNICAL DETAILS Turning diameter: 760 mm Turning length: 1,540 mm Travel X-axis: 630 x 220 mm Travel Z-axis: 1,585 x 1,515 mm Travel Y-axis: 230 mm Chuck diameter: 254 mm Bar capacity: 76 mm Spindle bore: 86 mm Swing over bed: 1,000 mm Spindle speed: 4,000 rpm Spindle nose: A2-8 Milling spindle speed range: 10,000 rpm Tool changer: 80 positions Turret: 12 positions Tool holder: BMT 65 P, Capto milling head Drive power: 26/22 kW MACHINE DETAILS Total connected load: 100 kVA Dimensions & Weight Footprint: approx. 6.1 x 2.7 x 3.0 m Machine weight: approx. 15.5 t Operating hours Spindle hours: 7,599 h Run time: 47,684 h Power-on time (control): 85,381 h EQUIPMENT Sub spindle 80-position tool magazine Hydraulically actuated hollow clamping device 12-position lower turret with BMT 65 P Chuck air blow-off system spindle 1 and spindle 2 Automatic central lubrication Contour milling with B-axis incl. 4-axis simultaneous machining Kledpex Updnsfx Ag Uel Internal coolant supply on sub spindle Automatic tool measuring arm Electronic tool breakage monitoring 2-pressure clamping for main and sub spindle Automatic shutdown after end of production Hinged belt chip conveyor 2 x power chucks 250 mm 1 x radial AGW 1 x axial AGW Measuring probe Extended high-pressure coolant system with paper belt filtration Note: For transportation, two Mega Liner semi-trailers with 3 m loading height will be required.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 25,243 h, functionality: fully functional, machine/vehicle number: 12030320, travel distance X-axis: 810 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain TNC 620, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel X-axis: 810 mm Travel Y-axis: 400 mm Travel Z-axis: 500 mm Table width: 900 mm Table length: 400 mm Spindle speed (max.): 10,000 rpm Number of spindles: 1 Number of tool magazine positions: 23 Tool holder: BT40 MACHINE DETAILS Control unit: Heidenhain TNC 620 Total weight: 3,500 kg Input voltage: 400 V Controller on-time: 25,243 h EQUIPMENT Documentation/manual Kjdpfxsyaq Sis Ag Uoll Continuously adjustable speed Chip conveyor Internal coolant supply: 20 bar Disc wiper in coolant tank Air blast cooling through spindle or external External coolant gun Spiral chip conveyor Centralized lubrication

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, spindle speed (max.): 14,000 rpm, number of slots in tool magazine: 133, TECHNICAL DETAILS Spindle speed: 14,000 rpm Coolant supply through the spindle: 70 bar MACHINE DETAILS Year of manufacture: 2023 EQUIPMENT Direct tapping Tool magazine with 133 storage positions Pallet changer Two pallets with tapped hole grid Eight adjustable rinse nozzles at the spindle Flow monitor for coolant through the spindle Cooling system with chip conveyor BSW880 Interface for mist extraction Visual tool breakage monitoring BTS Klsdeyarhrepfx Ag Usl Toolholder HSK-A63 Coolant temperature control unit Direct measuring systems (glass scales) for X, Y, Z axes Three-axis workpiece probe (Marposs Mida T25G) Double-layer cooling system (BDW 880) Automatic central lubrication Programmable axis mirroring Tool offset storage with 400 memory slots 54 (6+48) freely selectable workpiece coordinate systems Three-color signal lamp

Condition: excellent (used), Year of construction: 2015, Specification: X/Y: 110m/min Z: 20m/min Working Field X: 3250mm Y: 1400mm (Passage 1600mm) Z: 125mm + 100mm for vacuum pods 21 vertical drilling spindles 6 horizontal drills in the X direction 4 horizontal drills in the Y direction Grooving saw swivelling in the X & Y direction 10/12Kw main routing spindle Torque support for carrying aggregates (aggregates can not be swivelled) 8 Position tool changer travelling within the support in X & Y direction (not suitable for aggregates) 2 position linear pick up tool changer suitable for aggregates Optimised processing sequence drilling/routing Laser Pin for Vacuum pod positioning Automatic central lubrication Weeke quality pack Energy saving mode 400V 50hz Klodpfx Agsyar Rts Uol CE

Condition: good (used), mileage: 1,489,593 km, power: 302 kW (410.61 HP), first registration: 01/2017, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 3,700 mm, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,000 mm, total width: 2,550 mm, total height: 4,020 mm, Year of construction: 2017, Equipment: ABS, air conditioning, cruise control, traction control, = Additional Options and Accessories = - Digital tachograph - Tachograph (control device) - Fixed - Sleeper cab - Central lubrication system Klsdpfsxwkb Rjx Ag Uol = Remarks = Number of axles: 2, Configuration: 4x2, Payload: 11,509 kg, Unladen weight: 7,491 kg, Gross weight: 19,000 kg, Total tank capacity: 700 liters, Trailer load, unbraked: 750 kg, Fifth wheel height: 116 cm, Fifth wheel: Fixed, Central lubrication system, Cab type: Sleeper cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Color: Multicolored, Lighting type: Halogen lamp, Engine power: 302 kW (405 hp), Fuel: Diesel, Euro: 6, Transmission type: Opti-cruise, Gearbox make: Scania, Gears: 12, Power steering, ABS, ASR, Starter battery, Seats: 2, Seat configuration: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual = Further Information = Transmission Gearbox: SCA, 12 speeds, Automatic Axle configuration Tyre size: 315/70R22.5 Brakes: Disc brakes Axle 1: Steered; Tire tread left: 9 mm; Tire tread right: 9 mm; Suspension: leaf suspension Axle 2: Twin tires; Tire tread left inside: 17 mm; Tire tread left outside: 16 mm; Tire tread right inside: 16 mm; Tire tread right outside: 17 mm; Suspension: air suspension Weights Curb weight: 7,491 kg Payload: 11,509 kg Gross Vehicle Weight (GVW): 19,000 kg Interior Number of seats: 2 Maintenance APK (periodic technical inspection): valid until 07.2026 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Identification License plate: 60-BHT-8 = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands from various model years and price categories. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing inventory • Recognizable quality • Competitive pricing • Reliable business practices • Multilingual staff • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Professional technical services • The security of 'recognizable quality' • And more... Please visit our website for special offers and our complete inventory. Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send an inquiry via our website. Ask directly about our European warranty package.