Used Central Lubrication System for sale (41,106)

Condition: used, Atlas Copco Skid-mounted lubrication/seal oil system for compressor train including base reservoir/tank with pumps, filters, coolers, and valve manifold Including run down tank and assorted spares & gaskets as shown on the downloadable list below Note: Sales are conditional upon the satisfactory completion within 24 hours of conditional sale of a Business Partner Due Diligence Check (BPDDC) and an End User Statement form (EUS) by the buyer, and, if the buyer is not the end user, for each end user. Pgodjzmadmspfx Agxep BPDD and EUS forms can be downloaded from the website.

Condition: used, Ex-protected filter unit, extraction system, central extraction cartridge - impulse filter P. RIES GmbH Type 330 D ATEX Cartridge filter system, rectangular filter unit, central welding fume extraction Machine no. 10011932 Year of manufacture: 2020 - as new, unused Airflow rate: 3,300 m³/h Airflow rate: 0.9 m³/sec Filter area: 20 m² (1 piece cartridge filter) Differential pressure: 3,300 Pa (33 mbar) Extraction connection at filter inlet: 2x Ø 150 mm Exhaust connection at filter outlet: sound insulation hood Compressed air connection: approx. 8 bar Motor power: 3 kW Mains connection: 400 Volt, 50 Hz - Explosion-protected design ATEX II 2Db 125°C / 3G T4 - Pneumatic rotating filter cleaning, manual via push button - Manometer for differential pressure display (vacuum display in mbar) - Service door for filter replacement - Filter stage 1 = 1 cartridge filter Ø 325 mm, length 900 mm P-RIES, type cartridge filter 20.1 m², BGIA/IFA class M, antistatic Pgedpfsy N Duqsx Agxsp - Filter stage 2 = filter outlet (sound insulation hood) equipped with 9 activated carbon filter cartridges, type AKZ 2500V, 266 m³/h per filter cartridge - Built-in radial fan, type IE 3-premium efficiency, 12% improved efficiency - Robust steel construction in RAL 7035 light grey, antistatic powder-coated - Dirt collection container as pull-out drawer approx. 70 litres (440 x 530 x 300 mm) - EC Declaration of Conformity, operating instructions with wiring diagram available Required space (L x W x H): 670 x 700 x 2430 mm Weight extraction unit: 211 kg Transport dimensions on pallet (L x W x H): 930 x 1350 x 1950 mm Weight incl. transport pallet: 236 kg As new, unused, ex stock

Condition: used, Lubrication pump, oil pump for central lubrication, lubrication unit Central lubrication pump, oil pump for central lubrication, hydraulic pump, oil central lubrication pump Manufacturer: BEKA Schmiertechnik / Baier & Köppel, Pegnitz Type E-812 / ES0.5 Year of manufacture: approx. 1990 Flow rate: 0.4 l/min Pgedpfozpbq Hsx Agxsp Operating pressure: 15 bar Tank capacity: approx. 3 liters Motor power: 0.09 kW Motor speed: 2730 rpm Current consumption: 0.4 A Power supply: 400 Volt, 50 Hz Dimensions L x W x H: 280 x 150 x 380 mm Weight: 8.5 kg Good condition 2 units available Price stated per unit

Condition: used, Year of construction: 2018, Manufacturer: MORETTO, Year of manufacture: 2018, Dry air generator, Type Dehumidifying XD812X, Serial no. 1802877, Control unit, Type XD600, Air distributor, Type Server Flowmatik SR30F120, Serial no. 1808414, Control unit with touch display, 7 drying hoppers, capacity 1x 1,100 l, 2x 480 l, 2x 360 l, 2 storage containers/hoppers, 1x 180 l, 1x 120 l, 7 conveying units, Type Hopper Loader, 2 vacuum pumps, Type VTS50W3 and VTN40W3, 2 cyclone filters, Type C30CPB and FC300PB, Distribution station, Piping/tubing to the injection molding machines, Central control cabinet, Type Logic Server, Storage platform with staircase +++ Please note: This system is part of an online auction! +++ Podpfx Agjzn Arvexogp

Condition: used, Central lubrication, oil circulation system, single-line pump, central lubrication unit, grease lubrication pump, piston pump, lubrication pump, oil central lubrication pump -Manufacturer: Vogel, oil central lubrication pump from milling machine Deckel FP4L -Type: MFE 5/S3 -Motor: Type DM 6 60 W -Dimensions: 185/130/H250mm Pgjdpfxjul H Eno Agxjp -Total weight: 5 kg

Condition: used, Central lubrication, oil circulation system, single-line pump, central lubrication unit, grease lubrication pump, piston pump, lubrication pump, oil central lubrication pump, oil single-line pump Psdpfx Aem Rk Tpsgxsgp -Manufacturer: SKF Vogel, OIL- central lubrication pump from Uldrian TSM 22-8 rotary transfer machine -Type: MKU11-KW2-0005 428 -Content: approx. 1.8 l -Flow rate: 0.1 l/min / 16 bar -Dimensions: 220/130/H230 mm -Weight: 3.6 kg

Condition: good (used), Central lubrication, oil circulation system, inlet pump, central lubrication unit -Manufacturer: Showa, central lubrication unit from Matsuura MC 710V milling machine Pjdpsgxqt Ujfx Agxegp -Type: YMAS-3 -Container capacity: 2 liters -Dimensions: 110/220/H250 mm -Weight: 4.2 kg

Condition: used, Central lubrication, oil circulation system, single-line pump, central lubrication unit, grease lubrication pump, piston pump, lubrication pump, progressive pump, central lubrication pump -Handover: in its current condition as inspected -Device condition: not functioning, control board missing -Manufacturer: Lincoln, Quicklub central lubrication pump Psdjhv Ilwjpfx Agxegp -Type: 645-41110-1 -Voltage: 100-240 V -Power: 60 watts -P max: 240 bar -Dimensions: 270/240/H570 mm -Weight: 15.5 kg

Condition: used, Central lubrication, oil circulation system, progressive pump, central lubrication unit -Drive motor: Siemens Pgedpfx Agjd S Eqbexop -Pump: 440 V 0.105 kW -Number: 1 x pumps available -Price: per piece -Dimensions: 290/180/H340 mm -Weight: 8.7 kg

Condition: good (used), Central lubrication, oil circulation system, single-line pump, central lubrication unit, grease lubrication pump, piston pump, lubrication pump, oil central lubrication pump, oil single-line pump -Manufacturer: Vogel, OIL central lubrication pump oil inlet pump -Type: MFE 5/BW 7 -Container capacity: 6 l -Flow rate: 0.5 l/min / 20 bar -Dimensions: 360/145/H370 mm -Weight: 9.5 kg Pjdpfx Aowykh Sjgxegp

Condition: good (used), Central lubrication, oil circulation system, progressive pump, central lubrication unit, hydraulic unit, central lubrication, lubrication pump -Hydraulic unit: Central lubrication on mobile base frame -Hydraulic unit: AEG 0.25 kW 1430 rpm Pedpfjt Hmi Nex Agxegp -Tank: with level indicator -Control: Schleicher -Individual components: see photos -Number: 3x lubrication unit available -Price per piece -Dimensions: 640/370/H720mm -Weight: 56 kg

Condition: used, Central lubrication, grease circulation system, progressive pump -for: oil -Contents: 2 liters -Voltage: volts -Pressure: 4-7 bar -Number: 1x pumps available -Price: per piece Pjdpscwdmnsfx Agxogp -Dimensions: 125/150/H295 mm -Weight: 1.7 kg/piece

Condition: good (used), Central lubrication, oil circulation system, single-line pump, central lubrication unit, grease lubrication pump, piston pump, lubrication pump, oil central lubrication pump, single-line lubrication -Manufacturer: BEKA Baier Köppel, OIL central lubrication pump from milling machine Deckel FP4L Pedpfxsupbcis Agxjgp -Type: EA 6.3. -Engine: ABM 0.18 kW -Dimensions: 280/140/H375mm -Weight: 14.1 kg

Condition: used, Central lubrication, oil circulation system, single-line pump, central lubrication unit Pgjdoitv A Nepfx Agxsp -Handover: in the current condition as seen -Retaining foot: broken, see photo -Manufacturer. Vogele, central lubrication type SP/AE A1/220/380/1 -Block distributor: SPVS 21S1Z 9A -Drive: Haffner 0.25 kW -Individual components: see photos -Dimensions: 300/210/H320 mm -Weight: 19.8 kg

Condition: good (used), Central lubrication, oil circulation system Pgjdpfeb S Ht Ejx Agxep -Contents: approx. 3 liters -powered: electric -Dimensions: 290/250/H125 mm -Weight: 5.7 kg

Condition: used, Central lubrication, oil circulation system, progressive pump, central lubrication unit -Lube central lubrication unit: MMX-W -Motor: 100 V/0.01 kW -Dimensions: 280/190/H230 mm Pedpfx Aofbtgvjgxsgp -Weight: 9.3 kg

Condition: used, Central lubrication, oil circulation system, progressive pump -Contents: 7 l -Drive: 0.45 kW -Sample container Psdpfx Ajc Rx Swsgxjgp -Number: 1x pumps available -Price: per piece -Dimensions: 500/230/H450 mm -Weight: 19 kg

Year of construction: 2010, condition: used, Central lubrication, oil circulation system -Drive: pneumatic -Content: 4.0 l -Container material: aluminum Pgedefcr Nhjpfx Agxsp -Operating pressure: bar -Dimensions: 515/260/H225 mm -Weight: 5 kg

Condition: used, Central lubrication, oil circulation system, progressive pump, central lubrication unit, hydraulic unit Pedpsfcw Trofx Agxsgp -Drive motor: Himmelwerk type 4Nga F 14/11 -Pump: 250 V 0.88 kW 1430 rpm -Tank: 400/300/H200 mm -Dimensions: 700/320/H530 mm -Weight: 50 kg

Condition: used, Central lubrication, oil circulation system, progressive pump -pneumatic central lubrication -Dimensions: 140/200/H370 mm -Weight: 9.6 kg Pgedpfxsdnuhvj Agxop

Condition: used, Central lubrication, oil circulation system, progressive pump, central lubrication unit, hydraulic unit -Drive motor: VEB type KMER B 63 K 2 Podpfxjfcw Tuo Agxsgp -Pump: 0.18 kW 2760 rpm -Tank: 300/220/H220 mm -Dimensions: 430/250/H460 mm -Weight: 24 kg

Condition: used, Central lubrication, oil circulation system, progressive pump Pgedpfed Tkgbjx Agxsp -Drive: Dietz type DR 90 8/4n -Motor: 1.1 kW 1420 rpm -Dimensions: 460/460/H230 mm -Weight: 27 kg

Condition: used, Year of construction: 2003, machine/vehicle number: 519553, Central extraction system Adlolph & Co. (JKF) with screw conveyor and rotary valve. Manufacturer: Adolph & Co. (JKF) Type: AC 2 LK Year of manufacture: 2003 Suitable for dust and chips Volume flow: approx. 16,000 m³/h With air recirculation 1 piece Sluice filter, galvanized - Year of manufacture 2003 - AC 2 LK - Filter area: approx. 150m² - Cleaning of the filters via a vibration motor - Filter housing made of galvanized sheet steel - 3 inspection doors - Pressure relief surfaces - Exhaust air connection according to local requirements - Filter base frame in welded steel construction, galvanized. - Including dry extinguishing line, C connection 3 pieces Extraction fans: 1 piece Manufacturer: JKF Type: JK - 40K L Motor power: 11.0 kW Speed: 2,400 rpm Air flow: ~ 10,800 m³/h Pgsdpfoywd I Tjx Agxop 1 piece Manufacturer: JKF Type: JK - 30K L Motor power: 7.5 kW Speed: 2,900 rpm Air flow: ~ 7,500 m³/h 1 piece Manufacturer: JKF Type: JK - 30K L Motor power: 7.5 kW Speed: 2,900 rpm Air flow: ~ 7,500 m³/h1 piece Pipe components Air return - incl. galvanized ducts - Must be supplemented for a new location 1 piece Control cabinet With PLC Siemens control, in dustproof sheet steel standard housing, designed as a wall igned for: Installation dimensions: - Length: 5,250 mm - Width: 1,300 mm - Height: 4,650 mm (may vary depending on equipment) Electrical connection value: - Approx. varies depending on number of fans - 400 V/50 Hz - Control voltage 230 V AC/24 V DC - Location, not in stock

Condition: used, functionality: fully functional, Central ventilation unit HELIOS Air 1 XH1500 with highly efficient heat recovery and integrated air reheating. For controlled supply and exhaust ventilation of larger residential, commercial, or industrial areas. 2 EC fans at 0.5 kW each, 1,490 m³/h at 350 Pa. Electric preheating coil 3.9 kW, electronic reheating coil 3.8 kW, cross-flow heat exchanger, integrated filter box. Includes HELIOS Universal control unit ECO and 2 HELIOS duct sensors TFK – a functionally complete system. Technical data: - Air flow rate 1,490 m³/h at 350 Pa; fans 2 x 0.5 kW EC - Preheating coil 3.9 kW / Reheating coil 3.8 kW; cross-flow heat exchanger; integrated filter box - Control system: HELIOS Universal control unit ECO and 2 duct sensors TFK included - From a commercial environment, sold in its current condition without warranty. More units and equipment are continuously being offered for sale as part of a laboratory and pilot plant liquidation – inquiries are welcome. Psdozmaqaspfx Agxogp Sold on behalf of a customer via the Köck auction house. Located in eastern Austria, exact address available upon request. Collection/dismantling by the buyer.

Condition: used, Welding fume extraction, filtration unit, dust extraction by LINCOLN NORWELD Central extraction system, extraction plant, silo filter, cartridge filter, pulse jet filter, dedusting filter Type FU-80-A Serial no. 001799 Year of manufacture: 1996 Airflow rate max. 6000 m³/h (depending on fan capacity) Filter area 80 m² (4 units of 20 m² each) Extraction inlet at filter entry Ø 250 mm Exhaust outlet at filter exit Ø 250 mm Compressed air connection 4 bar - without fan, without filter control - Filter category C, 99.9% separation efficiency - Pneumatic filter cleaning - Filter inlet with pneumatic shut-off valve - 4 used filter cartridges, Ø 325 mm, length 1200 mm - Service access hatch 240 x 240 mm Space required (L x W x H): 1400 x 1600 x 2970 mm Weight: approx. 300 kg In good condition Pgjdpexf Up Isfx Agxep