Used Carousel for sale (152)

Condition: good (used), Year of construction: 2025, Maynards is offering the machinery and equipment from GoodYear’s 17–22 inch passenger car and SUV tire production facility in Fulda. On-site production will continue until the end of September 2025. We invite you to express your interest and submit offers for the complete facility or larger equipment packages. Immediate purchase is possible. Products (until closure): - High-performance and ultra-high-performance tires - Run-on-flat tires - SUV/4x4 tires - Diameter range: 17–22 inches Plant and Systems: - Mixing lines (Banbury 1–3) - Extrusion lines (Triplex, Quadruplex) - Apexing and filling/weighing systems - Steel cord production (winders, extruders, carousel, spoolers) - Tire building machines (R2.5, SOC-88, R1, ISR1, cutting machines) - Calendering lines (Comerio, framework, winding machines) - Tire curing and finishing lines - Tire curing presses (HF & Krupp, 77 units) - Grinding and cut-to-length machines (Matteuzzi, Collmann, Roentgen, TR5, TR7) - Cutting and calendering systems (Bias 66, KEF HTBC, rubber calender) - Tire carts - Tire testing equipment Utilities and Supply Systems: - Steam boiler systems - Water treatment - Oxygen supply & compressors Storage and Infrastructure: - Silos & oil tanks - Fire protection and safety systems (plant fire brigade) - Material handling and transport equipment (forklifts, tow tractors, pallet trucks) - Hydraulic pallet turners Itsdpjxa Dqdefx Aacen Workshop Area: - Maintenance of machinery and equipment Notes: - All machinery and equipment is offered “as is, where is.” - All Goodyear-specific data has been removed, and the software has been reset to factory settings.

Condition: good (used), Year of construction: 2013, functionality: fully functional, For sale is an MHM X-Type automatic screen printing carousel (year of manufacture 2013) in fully functional condition, including accessories. Last serviced in 2023 – the machine is sold without an intermediate dryer; various screen frames are available and can be purchased as needed. MHM X-Type Screen Printing Carousel (2013) – Details: Iedpexcvfrefx Aacstn Automatic screen printing carousel, renowned for high print quality and reliability (Manufacturer: MHM/Arioli). Fully operational: Last serviced in 2023; only limited use since then. All print heads and registration units operate precisely. Configuration: 10 colors / 12 stations. Max. print format approx. 43 × 50 cm (depending on frame size). Various screen frames available for purchase if required. Condition: Clean and well-maintained, ready to use. No known defects. Control panel and software in good condition, regularly calibrated. Key Features: Rapid print cycles, user-friendly operation, low maintenance – ideal for T-shirt and textile printing in medium to high volumes. MHM is regarded as one of the best manufacturers in this sector.

Condition: good (used), Year of construction: 2002, Storage Carousel, Megamat, approx. 3.04m high, 350kg per tray – used - : Ex-works price: €9,950 (net), for self-dismantling! Manufacturer: Megamat Model: 1568/267/16 Year of manufacture: 2002 Serial number: 16178 Equipment height: 304 cm Equipment width: 388 cm Equipment depth: 205 cm Number of trays: 16 Intermediate shelves: approx. 16 pcs - If yes: Quantity: 64 - Removable? Yes Tray dimensions: Height: approx. 20 cm (approx. 10 cm with intermediate shelves) Width: 325 cm Depth: 60 cm Total load capacity: 5,600 kg Load per tray: 350 kg Imbalance: 1,000 kg Operation: with Kardex Drive and SAP integration Itsdpfsxbhlnjx Aacsn Power supply: 3/N/PE 230/400V, 9A, main fuse 16A Condition: good Available: immediately Location: Herrenberg

Condition: like new (used), Year of construction: 2022, operating hours: 3,814 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, feed length X-axis: 1,270 mm, feed length Y-axis: 508 mm, feed length Z-axis: 635 mm, feed rate X-axis: 16 m/min, feed rate Y-axis: 16 m/min, feed rate Z-axis: 16 m/min, nominal power (apparent): 26 kVA, torque: 122 Nm, controller manufacturer: Haas, controller model: NGC, table width: 457 mm, table length: 1,321 mm, table load: 1,588 kg, distance table center to spindle nose: 742 mm, spindle motor power: 22,400 W, number of spindles: 1, number of slots in tool magazine: 20, input voltage: 400 V, type of input current: three-phase, Haas VF-4 with a 10k spindle, used in a production palletized setup of smaller parts in light materials, primarily aluminum, brass and plastics. Low hours, accident free. BT 40 Taper Tool changer type: Carousel Air required: 113 L/min at 6,9 bar Machine weight: 5316,0 kg Through-spindle coolant ready Programmable coolant spindle Chip auger Itodoxlky Njpfx Aacjn

Condition: like new (used), Year of construction: 2011, functionality: fully functional, type of input current: three-phase, input frequency: 50 Hz, temperature: 60 °C, load capacity: 250 kg, SUMMA DC3/OSK rotating basket, rotating drum cleaning equipment, Carousel degreasing machine with dryer. The chamber rotary machine of the Czech manufacturer operates on the principle of pressure spraying. The degreasing machine offers three surface cleaning combinations. The machine is suitable for surface degreasing of a wide range of materials. Manufacturer: SUMMA DC3/OSK Year of manufacture: 2011 Max. workpiece size: 770x500mm Max. workpiece weight: 250kg Electr. Power: 23kw Bath temperature: Max. 60°C Itedpowty H Djfx Aacsn Air temperature: Max. 120°C Bath (rinsing) heating: 12/6kw Drying air heating: 13.5kw Aerosol pressure: 0.28Mpa Pump performance: 70 liters/minute Machine weight: 520kg Machine dimensions: 1800x1800mm Height: 1500mm If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: used, Year of construction: 2004, HARE 8 HPIT INDEXING TABLE ASSEMBLY PRESS MAKE HARE, MADE IN ENGLAND MODEL 8 HPIT YEAR 2004 STROKE LENGTH 100.0 mm Iedpewb E Tfofx Aacetn CAROUSEL 6 STATIONS PLUS 6 STATION AUTOMATIC CAROUSEL 8 TONS HYDRAULIC RAM SICK LIGHT GUARDS FULL SET OF MANUALS

Condition: good (used), Year of construction: 2007, Used OKUMA lathe - Model: LT200-M TwinStar - Year of manufacture 2007 Iedpfx Aajv S Svvecjtn - Includes loading robot and loading carousel - Includes chip conveyor - Coolant tank - Available immediately

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, * Wemhöner Basic 1000 Plus - Year of manufacture 2008 * Type KT-MB-28/15-240 * With automatic pin system and inline turner * 2 tables with automatic vario-pin system * With Teflon coating for pre-glued foil * Foil laying system for pin table (pre-glued foil) * Heating plate size: 2800 x 1500mm * Max. workpiece size: 2,540 x 1,250mm * Membrane: yes * Cutting station * Foil storage carousel, 3.2m high with 14 suspension rods * Siemens S7 PLC control * Siemens TP 270 (touchscreen) operating unit for PLC control * Automatic membrane tensioning * Installed power supply 38.5 kW * Max. chamber pressure 6 bar * Max. press opening 150mm * 6 cylinders with Ø 125mm Iedpoxbcudjfx Aacjtn * Operating voltage 400V 50/60Hz * Press chamber height 40/60mm * Max. pressing force 2400 kN * Operating pressure of the hydraulic system 320 bar

Condition: excellent (used), Year of construction: 2019, operating hours: 278 h, Max. Workpiece Size for Peripheral Milling: X = 3,620 mm Maximum Travel Distances: X = 3,865 mm Minimum Room Height: 3.20 m Machining in Y and Z Y = 1,600 mm; Maximum Panel Width 2,000 mm Maximum Workpiece Height 300 mm Measured from the top edge of the vacuum suction cup 125 mm MACHINE OPERATION SOFTWARE CAMPUS V7 Plus CAD/CAM Software, 1 x license incl. CabinetControl Base and material removal simulation 1 software license secured via USB dongle for the machine CabinetControl Base Software for furniture design and production CAMPUS V7 PLUS, software for CNC machining centers ADDITIONAL MODULE – HIGH-SPEED MILLING Control Siemens industrial PC control Handheld remote control unit for machine operation Itjdpfjxfaf Uex Aacen MILLING HEAD 5-axis head 7840, Power: 12 kW n(max) = 0 - 24,000 rpm, steplessly adjustable Cardanic; C-axis +/- 360° rotatable, A-axis +/- 180° rotatable Liquid cooling (cooling unit included) with HSK-F 63 tool holding fixture Max. Tool weight: 6 kg Milling tools: max. Ø 200 mm Saw blades: max. Ø 350 mm with optional 7886 pick-up changer DRILLING UNIT Pressure booster for increasing the standard pressure from 6 to 8 bar Drilling unit 7881, 24 spindles Drive power 3.0 kW, including saw unit 18 individually selectable vertical spindles Arranged in L-shape, 11+2 in X, 6 in Y direction, 32 mm pitch n(max) 1,000 - 5,710 rpm steplessly adjustable 6 horizontal spindles 2 double drilling spindles in X 1 double drilling spindle in Y Including saw unit Integrated saw unit for sawing / grooving in X direction n(max) 1,000 - 7,330 rpm steplessly adjustable MACHINE TABLE Machine table with 6 consoles, pneumatically clamped, adjustable in X direction Display and positioning of consoles and suction cups via software program 2 lateral stops at field A and D, 2 large buttons for clamping and releasing workpieces, 2 tape-measure position displays for console positioning in X relative to stop at field A/D, tape-measure positioning for suction cups at each console in Y relative to rear stop STOPS 2 additional processing fields at the front for 6 consoles (4-field processing) 4 pneumatically controlled stops per field, including 1 stop per console and one side stop in X direction LOADING AIDS 4 pneumatically liftable and lowerable loading aids for easy handling of heavy workpieces TOOL CHANGERS Tool changer 7996, 18-position magazine (carousel), automatically moves in X-axis direction Moving tool changer 7886, 1-position saw blade magazine Specifically for large saw blade diameters up to 350 mm Pick-up system installed on the gantry, pneumatically operated Max. Tool diameter: Ø 350 mm Tool changer 7892, 16-position linear pick-up VACUUM PUMP 140 m³/h dry-running LED lighting for the machining area. SAFETY OPTIONS Safety enclosure according to CE standards Protective fencing on the side and rear EQUIPMENT VARIANTS AND ACCESSORIES – LUBRICATION Automatic central lubrication Gantry extension – ideal for 4-field processing and large workpieces. 2 controlled pneumatic modules for max. 5 frame clamping elements per field A/D Each module can simultaneously control up to 5 frame clamping elements. Simultaneous opening/closing of connected frame clamping elements, including foot pedal for operation, max. 2 modules per field A and field D available; OPTIONAL: LASER - Laser pointer Consisting of two laser pointers for positioning the vacuum suction cups

Condition: used, Year of construction: 2000, Used Bottle Washer Dryer Cames WDT8 Itjdpsvgt Ucsfx Aacjn  Introduction Firstly, the Cames WDT8 is a highly effective and reliable solution for the bottling industry. Specifically, this advanced washing and drying system is designed to ensure optimal bottle treatment, combining cutting-edge technology with precision engineering. Moreover, the machine is encased in stainless steel, offering robustness and longevity, coupled with safety features to ensure secure operation. Technical Features of Washing Secondly, the Cames WDT8 is equipped with an 8-head brush carousel for washing. This system effectively treats bottles, ensuring deep and uniform cleaning. Importantly, the carousel’s primitive diameter is 480 mm with a pitch of 188.4 mm, demonstrating its efficiency in handling various bottle sizes. Drying and Energy Efficiency Additionally, a distinctive element of the Cames WDT8 is its two-way drying tunnel, complete with blades and blowers, and a heated blowing bar with resistances at the top. This configuration ensures quick and effective drying, reducing processing time and increasing productivity. Notably, with a total power of 15.25 Kw and water consumption between 120 and 220 l/h, the system shows high energy efficiency. Production Capacity and Versatility Furthermore, the production capacity of this Bottle Washer Dryer ranges from a minimum of 2,750 bottles per hour to a maximum of 5,500 bottles per hour, offering great versatility for different production needs. The machine can handle a cylindrical bottle format, with the bottle entry positioned on the left, facilitating integration into the existing workflow. Conclusions of the used washer dryer Cames WDT8 In conclusion, the Bottle Washer Dryer Cames WDT8 is an excellent choice for those seeking a used bottle washing and drying system that combines high efficiency, versatility, and safety. Its robust design and advanced technical features make it a wise investment for any company in the bottling industry.

Year of construction: 2007, condition: good (used), Sandwich vending machine Manufacturer: DTVendings Type: BGT Exclusive patented plate system that offers the most professional results, the crunchiest and most delicious sandwich or sandwich. Itsdpfx Aasfny D Njcon Two stainless steel carousels of 60 units (sandwiches) and another of 40 (snacks). Four product selections (a single preselected unit). Independent roasting times. Ideal service time of between 60 and 90 seconds for sandwich, 90 and 120 seconds for snacks. Suitable products: sandwiches, folded pizzas, hamburgers, baguette bread sandwiches, ciabatta, even frankfurts. - Dimensions: 1850x995x960 mm - Weight: 375 Kg - Power: 220 V. 50 Hz - Power: 1.5 Kw - Capacity: 100 - Protocol: executive - Max consumption: 1.5 Kw - Average consumption: 0.9 Kw

Condition: excellent (used), Carousel Milling Machine RYE 40 SM SPEEDMAX Number of units: 3 Itsdpfjxf Iudjx Aacon Unit configuration: Milling machine Milling machine Grinding machine Pneumatic central material pressure

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 2006/452/32 - 21234, total height: 8,500 mm, total width: 3,500 mm, total length: 23,000 mm, load capacity per storage section: 450 kg, construction height: 855,000 mm, input voltage: 415 V, warranty duration: 12 months, load capacity: 450 kg, Equipment: safety light barrier, Megmat Carousel/Patenoster Model 2066/452/32 Serial Numbers 21234/5 Max load per carrier/shelf 450Kg Number of carrier shelves 32 Machine max load 14400Kg Machine Dimensions 8500mm Height x 3500mm width x 2300mm including worktop (Depth) Iedporgqykofx Aacetn Carrier Shelf Dimensions Width 2850mm x Height 400mm x Depth 600mm

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 210 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 20 m/min, controller manufacturer: Syntec, total height: 2,100 mm, total length: 4,300 mm, total width: 2,100 mm, table load: 2,500 kg, spindle motor power: 12,000 W, number of spindles: 16, Made in The Netherlands | CE certified | Handling; Dutch, English, Turkish, Italian, Polish, and more Isdpjtph I Nsfx Aacotn Manufacturer: D.M.A. Machinery Model: Express-Line type Nesting Dimensions: 1,600 x 3,200 mm Z-axis: 210mm Machine type: CNC Nesting Machine Year of construction: 2024 Features: - Tool-changing station with 12 positions (optional rotary carousel with up to 18 positions) - Nesting CADCAM software: Pegasus for milling & paneling - Optional double groove saw (X-Y axis) - 9.5 kW ATC spindle - 12 kW ATC Hiteco spindle HSK (optional) - 12.5 kW HITECO HSK spindle - Tool holders: ISO30 | HSK63F (ER32/ER40) - Optional: HSK63F (SCM Hiteco) - Speed: 1,000 - 24,000 RPM - Vacuum pump: 5.5 kW – 250 m³/h - Automatic lubrication system: Standard (grease) - CADCAM software post-processor included - Supported file formats: DXF, JPG, PNG, EPS, PLT, and more - Simulation and nesting optimization software

Condition: refurbished (used), Year of construction: 2007, Kuka tested / overhauled KRC2 ED05 KR240-2 2000 ca 6500h of work! working space: 55,0 m3 maximum reach 2.700 mm 2.900 mm 3.100 mm Nominal payload 240 kg Additional load arm/swing arm/carousel 50/100/300 kg Additional load arm + swingarm, max. 100 kg Maximum total load 640 kg Number of axles 6 Floor mounting position Position repeatability* ±0.06 mm Control KR C2 edition2005 Weight (without control), approx. 1,267 kg 1,277 kg 1,285 kg Temperature during operation +10 °C to +55 °C Protection class IP 65 Footprint of robot 1,006 mm x 1,006 mm Connection 7.3 kVA Noise level < 75 dB Axis data range (software) Speed at nominal payload 240 kg Axis 1 (A1) ±185° 86°/s Axis 2 (A2) 0°/-146° 80°/s Axis 3 (A3) +155°/-119° 79°/s Isdpfx Aopa Nxweacjtn Axis 4 (A4) ±350° 100°/s Axis 5 (A5) ±125° 110°/s Axis 6 (A6) ±350° 184°/s

Condition: used, Year of construction: 1995, Used Filling Triblock GAI 12.1.16.1. 16 Valves 2500 Bph Rinsing machine with 12 grippers, applying a single treatment of air blown on the bottle mouth before straightening. Carousel grippers manually variable in height 1. 1-head station for vacuum and gas injection before the filling machine with variable head in height 2. Filling machine 16 light vacuum taps in bell Filling bell manually variable in height Mechanical spring bottle lifting pistons 1. capper 1 head straight cork Leveler before closing with gas injection In the used triblock there is the vacuum system before closing the bottle Head manually variable in height All frame made of stainless steel Fairing of stainless steel Safeguards on the whole perimeter Bottle from left side Iedpfx Aaovguz Docstn Year 1995 marked CE Production approximately 2.500 bph with the 0.75 Ml

Condition: used, Year of construction: 2019, Serial number: 5xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21113 Specifications: 2019 model Impact hours: 3550 (may increase slightly) Compressor hours: 5538 (may increase slightly) Engine hours: approx. 8300 (may increase slightly) Winch Rod changer Water mist system Carousel Itjdpfx Aew Rag Djacsn Volvo engine Undercarriage (see photos) Remote control CME grinder L5 GPS Recently serviced Hammer will soon need repacking Work lights Thread greasing system Radio Air conditioning Ready for delivery Description: Sandvik DX800i drill rig with L5 GPS for sale.According to the owner, everything is working properly, and the rig was recently serviced.The hammer will soon need repacking.Ready for delivery.

Condition: not inspected (used), Year of construction: 2001, operating hours: 3,260 h, functionality: unexamined, machine/vehicle number: 730, travel distance X-axis: 1,350 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 685 mm, workpiece weight (max.): 1,500 kg, spindle speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! Loading can take place on 08.09.2025 or 09.09.2025. TECHNICAL DETAILS Travel distances Travel X: 1,350 mm Travel Y: 1,150 mm Travel Z (vertical): 685 mm Travel Z (horizontal): 870 mm Spindle Operating spindle: 0 – 12,000 rpm Acceleration time: approx. 2.5 s Tool holder: HSK-A63 Tool data Tool magazine: 46-slot carousel Number of magazine stations: 46 Max. tool diameter (all positions filled): 80 mm Max. tool diameter (adjacent positions free): 130 mm Max. tool weight: 8 kg Max. tool length: 300 mm Max. magazine load: 200 kg Tool change time (chip-to-chip): 9–12 sec H/H Feeds and rapid traverse Rapid traverse X, Y, Z: 30 m/min Table NC rotary table diameter: 1,100 mm Iedpfsw Hq Aisx Aacjtn Clamping surface: Ø 1,100 x 1,000 mm Table load capacity: 1,500 kg Centering bore: Ø 50H6 Table height above floor: approx. 1,120 mm Swivel axis (A axis): +15° to -120° Control: HEIDENHAIN TNC 426 MACHINE DETAILS Spindle hours: 3,260 h Machine on-hours: 82,797 h Dimensions & weight Machine weight: approx. 12,000 kg Required floor space (L x W x H): 4,130 x 3,680 x 3,150 mm EQUIPMENT RENISHAW OMP60 measuring probe Technical documentation Note: Transport is expected to be by truck with a 3,000 mm loading width.

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 200 mm, Model: Express-Router type CNC Nesting Gantry construction, high precision via gantry drive, accurate, requires low maintenance. The gantry's linear guides, driven on both sides, meet the highest standards for precision and dynamics. Rack and pinion drives on the X and Y axes ensure high-precision movement. Fast acceleration/deceleration, rapid tool changes. Ijdpewl H Ilsfx Aacstn Dimensions: 2,100 x 3,200 mm (Other sizes: 1,300 x 2,600 – 2,100 x 3,200 – 2,100 x 6,100 etc.) Z Axis: 210 mm (higher options available) Machine type: CNC Nesting Machine Year of manufacture: 2025 NEW – Dutch Assembled – Features: - Tool changer station with 12 positions (optional rotary carousel with up to 18 positions) - Nesting CAD/CAM software: Pegasus milling & panel processing - Dual groove cutter (X-Y axis) optional - 9 kW ATC spindle ISO30 - 12 kW ATC Hiteco spindle HSK-63F optional - Tool holders: ISO30 | HSK63F (ER32/ER40) - Speed: 1,000–24,000 RPM - Vacuum pump: Becker 5.5 kW – 250 m³/h - Automatic lubrication system as standard (grease) - CAD/CAM software post-processor included - DXF, JPG, PNG, EPS, PLT, and more - Simulation - Nesting optimization software Pegasus

Condition: used, 01. Itedpfxevgt Ups Aacen Product to be filled “CSD” 02. Type of Bottle RoundBottles 03. M.O.C. of the Bottle PET Bottles 04. Fill Volume / Bottle sizes 500ml 05. Type of Caps Screw Caps 06. Type of Labels BOPP 07. Output required 416 Bottles Per Minute on 500 ml     BLOWER SIPA 16 CAVITIES 2007 WITH MAINTENNACE OPERATION: Used blow molding machine for PET bottles with production capacity up to 25,000 bph with the 500ml format. Year of construction, 2007. Used blower complete with Octagon tipper, Air recovery system, preform hopper. This machine is immediately available for sale and in case of request we can carry out pre-production maintenance. Detached from production in fully functional status is excellent opportunity for used equipment. We will build new neck personalization for pco 1881 We will build two new set of blow mould as per your request. Air conveyor system NEW/used revised 2024   NEW RINSER /FILLER/SCREW CAPPER, SPORT CAPPER: Auto Rotary 70 Head Rinser Cum 70 Head Counter Pressure Filling Cum 15 Head Rotary Screw Cap Sealing Machine,AND 15 HEAD SPORT CUP system Model Uinibloc : 70x70x15x15, fitted with Disc cap feeder, chute&shoe, SS safety hood, PLC/HMI of Schneider make, Electronic BPM meter & Counter, sensor at in feed & out feed. Fitted with one set of change parts of 250ml PET bottle. All Product Contact Parts like Tank, Valves & all product contact parts will be SS316Grade. Output – 416BPM on 500 ml bottle. Fully Automatic Bulk Cap Elevator Additional Set of Change Parts If Required RINSING SECTION : TOP OF THE ROTARY RINSSER S. SLAT CHAIN CONVEYOR Body fabricated out of pre-polished S.S. Sheets, of 8’ length for carrying empty bottles to water rinsingnozzles and rinsed bottles to the Filling Machine. BOTTLE GRIPPING HEADS The gripping heads hold the bottles by neck. The bottle carrying grippers are supported by carousel thatby turning makes the grip lever arms slide on a fixed helical guide. In this way the bottles areturned upside down to have the openings atthe bottom to coincide with spray nozzle. AIR CLEANING PROCESS The bottles when rotated are brought into theline with the fixed nozzle in such a way thatits opening partially contains the nozzle. Airjet cleaning air sprayed inside the bottle forpresettime. VACUUM PROCESS The bottles when rotated are brought into the ine with the fixed nozzle in such a way that its openingpartially contains the nozzle.

Condition: used, Modular labeling machine 10 heads Modular labeling machine Cold glue •   4 stations: Front/back, seal L, neck ring   self-adhesive •   3 stations: Front/back, neck ring Bottles : round/square Label stations nr.: N. 3 self-adhesive stations N. 3 Cold glue stations Central diameter Ø: Ø 960 Plates nr.: 10 Length of the labels  min/max: 10/150 Height of the label  min/max: 15/200 Container diameter/height min/max: Ø 30/80 mm – Altezza min/max 100/400 mm Plate transmission Motorized plate Itsdjvgudfopfx Aacen Optical centering Yes Special inlet stars No. 3 multi-format in/out stars D 50->120 mm Industria 4.0 yes predisposed other request Double screw input in phase Max speed request: 6.500 bph Modular labeling machine: basic machine composition 1. System built according to CE regulations 2. Machine operation via PLC (Schneider) 3. Touch-screen control panel for labeler functions installed on a mobile and rotating support 4. Automatic variation of production speed with inverters and detection sensors installed on the conveyor belts 5. Light column indicating the operating status of the labeler 6. Electrical cabinet fixed internally to the machine body. 7. Accident prevention protections consisting of: ➢ On the screw front, with two swing doors ➢ On the labeling station front, single-part circulars a vertical lift 8. Height-adjustable upper head for different containers with gearmotor, panel adjustment, and automatic stop limit switch 9. Plate rotation via electronic cams 10. Shaped plates 11. The transmission between the plate and the motor occurs via a maintenance-free gear reducer 12. Quick plate change 13. The body of plates removable from the lower carousel (complete with all their transmission) 14. Double inlet auger with stop-in phase 15. N. 3 40M adhesive labeling stations, including: · Stepper motor · Machine stops after two labels are missing on the reel · Memory for 200 different labels · Automatic missing label recovery function · 4-axis adjustment system, without tools · Reel exhaustion sensor · Standard photocell for labels FOR TRANSPARENT 16. L-shaped sealing pliers with 4 DIVISIONS 17. N.3 Cold glue labeling station, type: 2-2-150, including: · Motorization with servomotor · Automatic glue film adjustment · Automatic washing of the drum tweezers for label removal. · Glue pump · Forced oil lubrication · No greasing points · Radial and tangential adjustment with machine in production · MANUAL GROUP HEIGHT ADJUSTMENT WITHOUT HEIGHT CHANGE 18.

Condition: used, Year of construction: 2004, operating hours: 55,000 h, Krones Flat Water Filling Monoblock 2004 KRONES TRIBLOC filling machine with CIP and CTA and HEUFT BOTTLE INSPECTOR. Product type: Non-carbonated water, non-carbonated fruit juices. Rinsing Machine Brand : KRONES Model: Variojet 2,160-54-126 Rinse heads: 54 Wheelbase: 126 Year: 2004/2005 Filling Machine Brand : KRONES Model: SENSOMETIC VP-G-PET 4,320-108-126 Filling valves: 108 Pitch: 126 mm Product: non-carbonated water Sizes: USED FOR 2.0 liters. Can also fill 0.5, 1.0 L and 1.5Lt. Capacity: 30000 b/h Effective size: 2.0 L PET Neck: 30/26 Maximum possible height of the container: 350.00 mm Minimum possible height of the container: 150.00 mm Direction of rotation of the carousel after clockwise entry (from left to right) Year: 2004 With stainless steel KRONES cleanroom housing Capping Machine of Krones triblock Brand: ZALKIN Number of heads: 18 Neck: 30/26 CIP Year: 2004 Voltage 230/400 V Frequency 50 Hz CAT – CTA – CONTROLLED AIR TEMPERATURE Brand: CIAT Year: 2009 Controls the air temperature inside the KRONES CLEAN chamber to maintain the same temperature and also for clean room over-presurization. FILL LEVEL INSPECTOR Brand: HEUFT Krones Used Filling Monoblock for Still Water –  IMMEDIATELY AVAILABLE – AND READY FOR PACKING AND SHIPPING! Ijdpfxovgugte Aacstn We can assist your company both in disassembly and assembly, we have competent staff and able to use the correct technology to reinstall this krones equipment. We can carry out a complete project of reinstallation and start-up of production with replacement of every damaged part or to be changed. We need about 1500 square meters for the entire bottling line, with the current layout. The disassembly work requires at least 30 days to be carried out carefully and marking all the cables and mechanical parts. All the programs are downloaded to ensure that no information is lost.

Condition: used, Year of construction: 2016, Used labeling machine AXTRA 720-H9SA4 up to 8000 bph General configuration and operational performance The used labeling machine AXTRA 720-H9SA4 up to 8000 bph delivers high-performance inline labeling for glass containers and, upon request, handles PET or other packaging materials. This fully overhauled labeling machine ensures reliable and precise operation in industrial environments that demand consistent labeling quality. Specifically, the AXTRA 720-H9-SA4 model reaches speeds of up to 8000 containers per hour, depending on sample confirmation by the customer. Operating direction and functional layout The machine operates in a clockwise direction, with containers entering from the left and exiting to the right when facing the conveyor. Therefore, this configuration supports integration into most standard bottling lines used in modern production facilities. Moreover, operators can easily align the layout with existing upstream and downstream equipment. Labeling system and reel handling The used labeling machine AXTRA 720-H9SA4 up to 8000 bph includes three non-stop labeling stations designed for 400 mm reels and one standard station for 300 mm reels. In addition, each station features sensors that accurately detect opaque labels, ensuring precise placement even with low-transparency materials. As a result, the system delivers consistent labeling quality across multiple formats. The machine can work within the following measurements, with a diameter of 45÷115mm and the heigth of 180÷330mm. Precision mechanics and integrated adjustments The machine uses electromechanical plates to guarantee high precision during operation. Furthermore, it features an electric vertical adjustment system for the upper carousel, allowing operators to perform fast format changes with minimal downtime. In fact, this automation improves productivity and reduces manual intervention. The system also includes a pre-installed optical centering system, which ensures accurate alignment on containers with printed reference marks. Consequently, the machine maintains high visual consistency during label application. Additionally, the machine supports continuous production with 9 active plates, which maintain consistent output and reduce interruptions. Compatible materials and reconfiguration options The machine currently labels glass containers, but our team can modify it to handle PET or other materials upon request. Similarly, we can adapt the system to different container shapes and label types. The existing setup applies front, back, and neck labels, while the fourth station supports additional applications, such as tamper-evident seals or promotional labeling. Therefore, users can reconfigure the machine to meet varied market or client-specific needs. Combination of new and used components Itedpow Az Diofx Aacjn Our team rebuilt the machine using a combination of used and new parts. The used components date back to 2016; however, we replaced many critical elements with new parts during the overhaul.

Condition: used, Year of construction: 2007, Used Filling Monoblock Cimec America The Used Filling Monoblock Cimec America model DPS 6/6/1C is an advanced isobaric bottling solution designed for the precise rinsing, filling, and capping of carbonated beverages. Engineered with industrial-grade stainless steel and based on a robust mechanical architecture, this monoblock is tailored for small to medium-sized beverage operations seeking reliability, hygiene, and consistent process control. This CIMEC monoblock integrates three essential stations into a compact, fully automatic system. The configuration includes a bottle rinsing unit, an isobaric filling carousel, and a crown capping station, all enclosed within stainless steel safety guards with transparent access doors for operational monitoring and safety compliance. Isobaric Filling Technology and Construction At the heart of the Used Filling Monoblock Cimec America is its isobaric filling carousel, specifically engineered for carbonated liquids such as beer, sparkling wine, kombucha, cider, and similar beverages requiring careful handling to preserve carbonation and minimize product loss. The filling station features stainless steel isobaric valves connected to a pressurized product tank, ensuring precise equalization between the internal bottle pressure and the product tank before the filling cycle begins. The isobaric filling method is characterized by maintaining a constant counter-pressure using CO₂ or other inert gases. This technology allows the product to enter the bottle under pressure, minimizing the formation of foam and the risk of de-gassing, which is critical for carbonated drinks. Filling is performed at a controlled rate, typically using a “level” principle where the filling valve shuts off when the liquid reaches a predefined height within the bottle, guided by dedicated overflow tubes. All product-contact surfaces are manufactured from high-quality AISI 304 stainless steel, ensuring full compliance with sanitary standards required in the food and beverage industry. The filling station is equipped with pressure gauges and safety valves, allowing for fine-tuned process adjustments and safeguarding both the operator and the product. Itodpfxsw Hr Awo Aacen The system accepts a range of bottle sizes from 0.22 liters up to 1.5 liters, providing operational flexibility for various production formats. Changeover between bottle sizes is managed manually, with adjustable guides and supports. The monoblock is configured for crown cap application (26 mm diameter), using a dedicated capping turret with mechanical sorting and feeding of the crowns. The design enables precise and secure sealing, vital for maintaining carbonation and product integrity. Automation, Utility Requirements, and Operational Safety This Used Filling Monoblock Cimec America operates as a fully automated rotary triblock, requiring minimal manual intervention during normal production cycles. Mechanical synchronization ensures seamless bottle transfer between stations, supported by motor-driven conveyors and rotary starwheels for accurate positioning throughout rinsing, filling, and capping.

Condition: used, Year of construction: 2003, Used Isobaric Filling Monoblock Alfatek TBV 24/32/4 ISO up to 4500 bph Isdow Iv Dgopfx Aacotn The Used Isobaric Filling Monoblock Alfatek TBV 24/32/4 ISO up to 4500 bph is a high-precision bottling machine designed for the controlled rinsing, filling, and capping of still and sparkling wines. Configured with a 24-station rinser, 32 isobaric filling valves, and 4 capping heads, it offers a balanced combination of speed, product care, and operational flexibility. The machine is engineered to perform at a nominal capacity of approximately 4,500 bottles per hour for still wine and around 4,000 bottles per hour for sparkling wine, thanks to its dual filling modes: gravity filling for still products and traditional isobaric filling for carbonated products. Constructed from stainless steel throughout, the monoblock provides excellent durability and hygiene. All product contact parts are made from food-grade stainless steel AISI 316L, ensuring resistance to corrosion and maintaining wine purity during processing. Transparent polycarbonate guarding surrounds the working area, allowing visual inspection while providing full operator safety. Each access panel is fitted with interlocked safety switches to meet industry safety standards. The layout of the monoblock is compact yet service-friendly, with easy access to all mechanical and pneumatic components. The integration of the three main functions—rinsing, filling, and capping—into one frame reduces transfer points, limits bottle handling stress, and optimises space usage within the bottling line. Rinsing, Filling, and Capping Operations The rinser section features 24 grippers mounted on a rotating carousel. Bottles are inverted and subjected to a dual-treatment rinse cycle: an initial rinse with water or sanitising solution, followed by an air blow using sterile or filtered air to remove any residual liquid and particles. The grippers are designed for precise neck handling, ensuring secure positioning of bottles throughout the rinse cycle, regardless of format. The filling section uses 32 traditional mechanical isobaric valves with pneumatic actuation. This system is known for its robustness, easy maintenance, and accurate fill level control. The filling process can be operated in gravity mode for still wine, providing faster throughput, or in isobaric mode for sparkling wine, preserving carbonation levels and minimising oxygen pickup. Each valve is equipped with a vent tube for precise level setting and a pre-evacuation stage to reduce dissolved oxygen, improving product shelf life and stability. The capping turret has four heads, capable of applying both cylindrical corks and BVS screw caps. The changeover between closure types is supported by adjustable head assemblies and interchangeable tooling, allowing the machine to handle a wide range of premium wine formats without extensive downtime. The capping process is synchronised with bottle infeed and outfeed to ensure accurate closure placement and torque or insertion depth control, depending on the closure type.