Used Carousel for sale (154)

Condition: ready for operation (used), Year of construction: 2019, operating hours: 1,150 h, functionality: fully functional, machine/vehicle number: 1901910, year of last overhaul: 2024, Equipment: documentation/manual, Hebbecker Alpha- Line- S carousel 12 pallets + 6 prints. Supplied with the machine: 12x aluminum sandwich adult pallets, 42 x 70cm 12x aluminum sandwich small pallets, 32 x 70cm Bljdpfxstq U Urj Abbjr 12x aluminum sandwich sleeve pallets, 13 x 70cm 4x Hebbecker printing squeegees 35cm with cuts for polo shirts 4x Hebbecker pressure and flood blades, 13cm 12x USA rubber pallet cover 3mm, 42/70cm 12x USA rubber pallet cover 3mm, 32/70cm 12x USA rubber pallet decking, 3mm, 13/70cm 1x laser cross with holder for positioning the prints 2x intermediate dryer Magic- 25 with pyrometer temperature sensor

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 11689, Schulze Texiprint carousel model KN 6/6 incl. 6 pallets and 6 stretched screen printing frames (8.700,- Euro net) incl. intermediate dryer SCHULZE Flash 4050 Plus (2.300,- Euro net) incl. accessories (inks, glue, squeegee, spatula, cleaner, cabinet...) (650,- Euro net) All items new or hardly used (less than 10x)! Both machines built in 05/2021! Bedsqwdd Espfx Abbjlr A sale of individual parts is also possible on request.

Condition: ready for operation (used), Year of construction: 2022, operating hours: 200 h, functionality: fully functional, load capacity: 120 kg, arm reach: 2,701 mm, TECHNICAL DETAILS Maximum reach: 2,701 mm Nominal load capacity: 120 kg Maximum load capacity: 167 kg Maximum additional load carousel / swing arm / arm: 300 kg / 130 kg / 150 kg Position repeatability (ISO 9283): ±0.05 mm Number of axes: 6 Control system: KR C4 Range of movement A1: ±185° A2: -140° / -5° A3: -120° / 168° A4: ±350° A5: ±125° A6: ±350° Speed at nominal load A1: 120°/s A2: 115°/s A3: 120°/s A4: 190°/s A5: 180°/s A6: 260°/s MACHINE DETAILS Installation position: Floor Installation area: 754 mm x 754 mm Bledsvi Igfopfx Abbjr Weight: approx. 1,069 kg Running time: approx. 120 h - 200 h (pre-acceptance, no active use) Network cable length: 10 m Power supply: AS13 134 CTR PNT EPS AIR AIR GDN Ambient temperature during operation: 0 °C to 55 °C (273 K to 328 K) Protection class (IEC 60529): IP65 Degree of protection for robot hand (IEC 60529): IP65 / IP67 EQUIPMENT - KR C4 basic enclosure - Drive configuration SC6.1 - Special paint finish for control cabinet (color: RAL 7035 light grey) - Labeling set de/en KR C4 - Double-bit cabinet lock - Mains supply HAN6 - Power supply XFMRless 400V - CSP Standard 2x USB 3.0 - Safety interface X11 - Kuka WorkVisual - Kuka PLCProConOS4-1 4.1 - SmartPAD holder - SmartPAD - Connecting cable set X20 (15 m) - BUS-smartPAD cable (10 m) - Axis limitation A1 20°

Condition: excellent (used), Year of construction: 2019, For sale: 14 Kardex Megamat RS 350 vertical carousels in excellent condition. These machines have been meticulously maintained with annual servicing and have been used exclusively in a clean and light-duty environment. They are available for individual purchase or in packages of 2, 4, 6, 8, or all 14 units. The collection includes 6 units manufactured in 2018 and 8 units from 2019, offered in two height options: 6,585 mm and 7,110 mm. Each vertical carousel is configured with either 21 or 23 carriers, providing between 42 and 49 shelves per unit. A detailed description of the shelf configurations can be provided upon request. All units feature the optional "Matrix Strip," an LED guidance system installed at the access point. This system highlights the picking location laterally and displays product information, though ERP or WMS integration is required to fully utilize its capabilities. Please note that the boxes shown in images are not included. Specifications: Manufacturer: Kardex Remstar Model: MEG RS 350.1.3050.6.533.21 / MEG RS 350.1.3050.6.533.23 Bledpfxsvgdkbj Abber Manufacturing Year: 6 units from 2018, 8 units from 2019 Height (Vertical Carousel / Carrier): 6,585 mm & 7,110 mm with a free storage height of approximately 470 mm Width (Vertical Carousel / Carrier): 3,675 mm / 3,050 mm Depth (Vertical Carousel / Carrier): 1,671 mm / 628 mm Number of Carriers / Shelves: 21 or 23 carriers with 42-49 shelves Maximum Weight per tray: 228-350 kg, depending on the number of shelves installed Electronics: 3/N/PE 400V For further details or inquiries, please don't hesitate to get in touch.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, input voltage: 400 V, For sale: M&R Sportsman EM 1210 screen printing carousel for textile printing. The machine is in working condition, has been in our facility since new, and has low usage (470,000 prints). Bjdpfxjxfkm Ne Abbslr In other listings, we offer various textile printing accessories: M&R Sprint M2000 gas dryer, flash cure units, 80 Newman-roller screen frames, Trilock rapid registration system, and much more.

Condition: as good as new (ex-display), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 10023297, load capacity: 180 kg, arm reach: 3,500 mm, pivoting range: 370 °, controller model: KR C4, TECHNICAL DETAILS Control system Controller: KR C4 Handheld control unit: KUKA smartPAD Performance data Bledjvkcaispfx Abber Maximum reach: 3,500 mm Nominal payload: 180 kg Nominal additional load (carousel/swing arm/arm): 0 kg / 0 kg / 50 kg Nominal total load: 230 kg Position repeatability (ISO 9283): ± 0.06 mm Number of axes: 6 Installation position: Floor Installation area: 830 mm x 830 mm Weight: approx. 1,201 kg Axis data and range of movement A1: ±185° A2: -120° / 70° A3: -120° / 155° A4: ±350° A5: ±125° A6: ±350° Speed at nominal load A1: 105°/s A2: 101°/s A3: 107°/s A4: 179°/s A5: 172°/s A6: 219°/s Operating conditions Ambient temperature during operation: 10 °C to 55 °C Protection class (IEC 60529): IP65 Protection class central hand (IEC 60529): IP65 EQUIPMENT - Stand - KUKA smartPAD A forklift is available for loading.

Condition: good (used), Year of construction: 2014, HAAS VF1 (2014) • Manufacturer: HAAS • Model: VF-1 • Year of Manufacture: 2014 • Machine Type: Vertical Machining Center Technical Data: Blodpfxsv Iywms Abbjr • Travel (X / Y / Z): 508 x 406 x 508 mm (20” x 16” x 20”) • Table Size: 660 x 356 mm (26” x 14”) • Maximum Table Load: 1,360 kg (3,000 lbs) • Spindle Speed: Up to 8,100 RPM (optional 10,000 or 15,000 RPM) • Spindle Taper: 40 Taper • Spindle Power: 22.4 kW (30 HP) Vector Drive • Tool Changer Capacity: 20+1 (Carousel Type) • Rapid Traverse Rates: 25.4 m/min (1,000 in/min) • Cutting Feed Rate: 12.7 m/min (500 in/min) • Automatic Tool Changer: Yes • Coolant System: Standard Flood Coolant System • Control System: Haas CNC Control • Machine Weight: Approx. 3,630 kg (8,000 lbs)

Condition: like new (used), Year of construction: 2013, functionality: fully functional, total height: 7,385 mm, total width: 1,471 mm, total length: 3,275 mm, 8 Kardex Megamat RS 350 vertical carousels in excellent condition. The installation includes 8 units manufactured between 2013 and 2018. Available in three height options: 7185 mm, 7384 mm, and 7585 mm. Each vertical carousel is configured with 34, 35, or 36 trays. Blsdpfsv Svmrjx Abbjr For more details or inquiries, please do not hesitate to contact us.

Condition: repair required (used), Year of construction: 2001, functionality: limited functionality, machine/vehicle number: 70TY5064, travel distance X-axis: 500 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, total height: 2,600 mm, total length: 1,640 mm, total width: 2,349 mm, table width: 380 mm, table length: 380 mm, table load: 200 kg, overall weight: 3,500 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 5,500 W, number of spindles: 1, number of slots in tool magazine: 14, The Hyundai SPT-V30TD is a compact 3-axis vertical machining center designed for high-speed drilling, tapping, and light milling applications, typically found in precision component manufacturing environments. The machine features a robust structure and is equipped with a Yasnac CNC control—known for reliability and effective motion control. Main Specifications: Travel: X: 500 mm, Y: 300 mm, Z: 300 mm Spindle Speed: Up to 8000 RPM, with BT30 (ISO 30) spindle taper Table Size: 600 mm x 380 mm Bjdpfx Abexgdluobelr Max Table Load: 200 kg ATC: 14 tool capacity, carousel type Control: Yasnac J50M Machine Dimensions (L x W x H): 1640 x 2349 x 2600 mm Weight: Approx. 3500 kg Notable Features: Rapid traverse rates (X, Y, Z): up to 30 m/min Dual table/pallet changer is sometimes featured, increasing productivity Compact footprint designed for efficient shop floor space use Suitable for drilling up to 20 mm, tapping up to M16, and various milling operations Machine need to be fixed. It shows fault 310: Servo Off.

Year of construction: 2015, operating hours: 10 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: SN 15101588 SP 082988, Thermo Scientific Dionex ASE 350 Automatic Sample Extractor for High-Performance Extraction of Solid Samples at High Pressure and High Temperature Thermo Scientific Dionex ASE 350 Automatic Sample Extractor is equipped with a carousel for 24 extraction cells with a volume of 1 to 100 ml, a carousel for 60 ml and 250 ml collection containers and a solvent organization module. Bedewm Ariopfx Abbelr Additional equipment offered with the extractor: - Extraction cells with a volume of 22 ml – 6 pcs. - Bottles for solvents with a volume of 2 l – 2 pcs. - Bottle connections with caps – 2 pcs. Date of purchase: December 2015 The ASE 350 system is a fast extractor that simplifies work in almost any application requiring extraction from soil, sediments or plant or animal material. 1. The extractor weighs 65 kg. A suitably stable laboratory table must be provided. 2. The ASE 350 extractor is powered by 230 V, 50 Hz. The required fuse is 16 A. 3. Nitrogen with a purity of 99.99% is required to ensure proper operation of the extractor. The reducer should allow the output gas pressure to be set within the range of 1.03-1.38 MPa. 4. Optionally, in addition to nitrogen, air can be used to control the pneumatics of the device. The air should be 99.99% pure. The air source should allow the output gas pressure to be adjusted within the range of 0.4 MPa to 0.8 MPa. NOTE: AIR DOES NOT SUBSTITUTE FOR NITROGEN, WHICH IS NECESSARY, AIR CAN BE REPLACED WITH NITROGEN. 5. Dimensions: 750 x 600 x 700 mm (width x depth x height).

Condition: new, A complete pallet production line. Number/Pos Part no/Name/Quantity 1/OKKR-100/Opti-Cutter Magasin/L=3000mm/1 2/RON120/Block feeder carousel/1 3/OM-1500EL/Leg Machine/1 4/LP-OM/Leg positioning system/1 5/D-1000EL/Deck Machine/1 6/KTR-1006/Chain conveyor L=6000/1 7/GRG/Gantry Robot mechanical Gripper/1 8/SMS-1000EL/Assembly Machine/1 9/HKR/Automatic corner cutting machine/1 10/KTR-1004/Chain conveyor L=4000/1 11/ROB-G/Robot with mechanical gripper/1 Blodpfx Aswduudebbor Average capacity: 1500 pallets/8 hours (800x1200 mm pallet with max 6 deck boards) Maximum capacity: 1900 pallets/8 hours (800x1200 mm pallet with max 6 deck boards)

Condition: like new (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: vec1206-L-1809RO1, input voltage: 400 V, total length: 7,000 mm, total width: 7,000 mm, total height: 2,000 mm, compressed air connection: 6 bar, type of input current: three-phase, year of last overhaul: 2024, overall weight: 2,000 kg, input current: 11 A, mount diameter: 7,000 mm, loading space length: 7,000 mm, loading space width: 3,000 mm, loading space height: 2,000 mm, Laminated steel frame. safety bars for each print head and loading/unloading station. - Safety barrier to prevent operators from entering the stations during work -FOOT PEDAL (print order) -SERVOINDEXATOR-Precise pallet position control +/- .001". Ensures smooth indexing with superior print consistency -Increase production with precise control of acceleration and deceleration direction index: right and left -Programmed with Step-Back, Multi Step-Back and Cycle indexing options -Adjustment of the carousel stroke in both directions -15" TOUCHSCREEN with Aries 2 operating system Easy operator access to all machine parameters Program multiple heads simultaneously Full speed control in both directions of travel View number of prints in real time, speed (pcs/hour) Save all parameters of a stored job: indexer speed, head speed of printing, printing area, number of strokes, time and temperature flash polymerization, color design Setting the preheating temperature of the pallets Quick setting at the same print speed and distance for all heads -Electrically operated PRINT HEADS-10 stations, 6 colors, 4 intermediate flashes, 12 pallets -VERY USEFUL for printing with water-based ink (automatic screen flooding system with ink after printing) - adjusting the screens (templates) with maximum precision in 3 points (front-back, left-right, rotational movement) -adjusting the distance between the pallet and the screen giving you the flexibility to print practically any ink on any substrate at the touch of a button - independent adjustment of the angle of the scraper and counter-scraper, with possible adjustments do with one hand - INTERMEDIATE FLASHS - RAPID WAVE QUARTZ QUARTZ FLASH 51cmX53cm (12 lamps) maximum coverage area Each of them is divided into 3 separate areas (front, middle, back) that can be used depending of the print size: area one, area two, area three, each two/all three CONFIGURED FOR THE POSSIBILITY OF INTERMEDIATE DRYING AFTER EACH PRINT: PRINT/FLASH/PRINT/PRINT/FLASH/PRINT/FLASH/PRINT/FLASH/PRINT/FLA SH/PRINT (POLYCROMY AC-powered printheads enhance finesse, speed and power Front and rear travel adjustment One-handed tool-free squeegee/flood bar lock for quick and easy charging and changing 15" touch screen with Aries 2 operating system Easy operator access to all machine parameters Program multiple heads simultaneously Full speed control in both directions of travel Bsdpevccqxofx Abbslr View real-time number of prints (dozen) and speed (pcs/hour) Save all parameters of a stored job: non-contact, indexer speed, indexer speed, printhead speed, print area, number of strokes, flash curing time and temperature, color design, mode Set the pallet preheat temperature Quickly set the same print speed and distance for all heads Print heads AC electric print heads for a stronger and smoother stroke Press the button at the loading/unloading stations to prevent printing on empty pallets Adjustable side supports for low-profile screens for easy access True three-point micro-registration (front to back, left to right and roll motion)

Condition: ready for operation (used), Year of construction: 2001, CNC twin table ERGON CNC Maskin SCM Type:Ergon Serie no:AA1/012348 Year:2001 Bedpfx Aen Hx Tljbbslr CNC machine SCM ERGON Program NUM PC, and CAD ALIPA CAM 2 work tables simultaneoulsy or single work 2 tool magazin/too lchange each 12 holders 2 electro spindles each 11 kw, 18000rpm who can work in pair (DUOSET) independence Z axe stroke Tool holder HSK-63 1 drillbox 18 spindles Toolchange magazin 2x12 places Angular head Manual/instruction, pneumatic, electric diagram in severaL languages on CD Technical info: Control, program NUM-PC, CAD Alpha CAM Axis stroke X-Y-Z 4500-1740x-300mm Work tables 2 pcs each 2160x1520mm electyro spindles/routers DUOSET 2x11kw, 18000rpmwho can work in pair Vertical stroke of 2 independent Z axis Syncron electronic floating head 2 carousel toolholders for change each 12 pcs HSK 63 cone Vector axe Vacuumpump 90m3/h F18-drillbox 18 spindles Power 400 volt, 50 Hz, 3 phase Dimension set up approx:7460x5500mm X-x Weight 7000 kg Stock no:2001650BXA Price: 200000 SEK

Condition: like new (used), Year of construction: 2014, Siemens 840 D Swivelling control panel including SIEMENS 840 D Solution Line control system. Travel X axis: 8000 mm Travel Y axis: 1300 mm Travel Z axis: 2200 mm Tool system: SK 50; Capto C8 Main spindle: 20–4000 RPM 3D volume model of the machine HEIDENHAIN measurement system on all axes. Automatic central lubrication with pressure and time monitoring for all axes and moving components. Measuring probe system RENISHAW RMP60 M Tool breakage detection via probe Bljdpfx Abow Syv Ujbsr BRANKAMP CMS collision monitoring with two measuring channels: Center height, Fibro rotary clamp: 1100 mm Center width, Fibro rotary clamp: 900–3000 mm Max. swing diameter, Fibro rotary clamp: 2200 mm Fibro rotary table D=1600; 250 RPM Carousel rotary table FIBRODYN 1600 mm: Table surface 6000x2000 mm d’Andrea facing slide Universal milling head Automatic tool changer ATC, 80 tool magazine slots in M version: 3 milling head slots High-pressure pump 30 bar Operating hours: 4261 h

Condition: like new (used), Year of construction: 2023, For sale: MHM SPiQ 20 45×55 screen printing carousel (SYNCHROPRINT iQ OVAL compact) with iDS (individual Drive System). Manufacturing date: January 2023. Manufacturer: MHM – Machines Highest Mechatronic GmbH (Austria) Model: SPiQ 20 45×55 Type: 1450IQ Year of manufacture: 01/2023 Power supply: 3×400 V, 50/60 Hz Connected load: 7.4 kVA Air requirement: approx. 690 l/min, 0.8 MPa (8 bar / 116 psi) Specification (per order): • Print area: 45×55 cm • Number of printing stations: 13 • Number of flash cure units: 4 Equipment: Blodsxb Avzspfx Abbsr • 20× aluminium palette with neck cut-out: 52×80 cm • 13× squeegee blade 50 cm / 65 shore • 13× flood blade (low) 50 cm • 1× MHM Pro Iron – 40 cm Overall dimensions: 3.5 m × 11 m

Condition: excellent (used), Year of construction: 2017, 12 Kardex Megamat RS 350 Vertical Carousels for Sale – Well Maintained We are offering 12 Kardex Megamat RS 350 vertical carousels in excellent condition. All units have been operated in a clean, light production environment with regular servicing, most recently in April 2025. - 6 units manufactured in 2016 - 6 units manufactured in 2017 - All with a height of 6,660 mm Each carousel includes 30 standard shelves (carriers) and can be equipped with intermediate shelves to accommodate 50–60 trays per unit. Additional trays are available at attractive pricing upon request. Key features: - Matrixlist LED display in the access opening clearly indicates the exact pick position. When integrated with a business system or WMS, it can display item information directly at the machine. - Optional confirmation buttons at the worktable allow you to acknowledge storage or retrieval operations without using the main control panel. Bljdew Nivxjpfx Abber Units are available individually or in any desired quantity. Please note: The boxes depicted in the photos are not included in the offer. Technical details: - Manufacturer: Kardex Remstar - Year of manufacture: 2016–2017 - Model: 350.1.3050.6.381.30 - Carousel/Carrier Height: 6,660 mm / 350 mm - Carousel/Carrier Width: 3,675 mm / 3,050 mm - Carousel/Carrier Depth: 1,671 mm / 628 mm - Number of carriers: 30 per carousel; with intermediate shelves approx. 50–60 trays per carousel - Max load per carrier: 350 kg - Power supply: 3/N/PE 400V

Condition: good (used), Year of construction: 1997, The photo shows a Fanuc Series 0-M (a popular CNC controller used in the 1980s/90s). It supports X, Y, Z axis interpolation and a tool magazine. Features include a CRT screen and a classic push-button keyboard. 3. Electrical parameters (nameplate) Power supply: 3-phase, 380 V, 50 Hz Control voltage: (not specified, but typically Fanuc 110/220 V → transformer) Auxiliary voltage: 24 V Protection: 16 A (flink) Electrical diagram number: 711 792 01 01 4. Machine construction Vertical CNC machining center (milling machine) with a fully enclosed housing. Worktable with grid of holes for mounting workpieces. Carousel tool magazine (visible in the photo) – most often 12, 20, or 24 tools (depending on version). Automatic tool changer (ATC). Z-axis operates vertically (guideway assembly and telescopic way covers visible). 5. Typical technical data (for Chiron FZ 12/15 machines from this period) (values may differ depending on the model, but these are approximate parameters): Travels (X/Y/Z): approx. 500 – 700 / 400 / 400 mm Table surface: 800 × 400 mm (example) Table load: 200 – 300 kg Spindle speed: 20 – 6000 rpm (some versions up to 8000 rpm) Spindle taper: SK 40 (DIN 69871) Spindle drive: 7.5 – 15 kW (depending on version) Blsdpjw Uab Ajfx Abbjr Tool magazine: 12 – 24 tools Positioning accuracy: ±0.005 mm Rapid traverse: 30 m/min (X/Y/Z axes) 6. Application Metalworking (steel, aluminum, cast iron, light alloys). 📌 General information: • Manufacturer: CHIRON, Germany • Type: CNC machining center • Control: as seen in the photo (Fanuc Series 0-M) • Automatic tool changer • Heavy-duty worktable with workpiece clamping options • Solid industrial construction 📌 Machine condition: • Used machine, in good condition • Regularly serviced • Shows normal signs of use • Fully functional 📌 Application: • High-precision milling • Machining of metal components • Single-part and batch production

Condition: new, The new 100F briquetting press from Holzprofi impresses with its mature, simple and solid construction. The press is designed for trade and industry. Made in EU ! Technical data: Bodpovrvfnefx Abbjlr Motor output power 100% ED 11 kW Briquette diameter 70 mm Power consumption approx. 8200 W/h Capacity 90 - 120 kg/h Chip bunker 0.75 m³ Weight 810 kg weight briquettes approx. 900 - 1100 Kg/m³ Sound pressure level 68 dB Dimensions: 2220 x 1200 x 1510 mm standard equipment: With built-on oil cooler Vibration unit to prevent bridging of sawdust Automatic change of direction of rotation of the shaft Automatic switch-off Timer to start machine Special equipment on request: Carousel with 5 containers Filtering unit Modification of silo to fit filter systems of all manufacturers (eg AL-KO, Felder, Scheuch Lingo, Airmex, Nestro, Schuko, Höcker)

Condition: excellent (used), Fladder SC 300 finishing and brushing machine Year of manufacture 1995 Manufacturer Fladder System Denmark Carousel working height 800 mm Working width 1200 mm Blodpfx Absr Eri Ajbjr Passing speed 0.3 - 10.0 m/min. Automatic pneumatic presses Main motor 7.5kW Number of spindles 6 Rotary motor 0,37kW Carousel motor 0,55kW

Condition: used, Year of construction: 2004, NP 681 | BOTTLING LINE Product: Still water Output: 8,000 BPH Blow Molding Machine PET SIAPI Model: EAS70.115.9 Year: 2003 Type: linear Number of cavities: 9 Chiller Eurochiller Model: GCA 035 Year: 2015 Rinser WAB Model: Advance RP 1R 32/113 T Year: 2002 Rotation: clockwise Number of clamps: 32 Electric carousel height adjustment via operator panel Fixed nozzle Double treatment Filler BC Model: Master RS 32/32/8 Year: 2004 Rotation: clockwise Blodew Rp Anopfx Abbsr Valves: 32 mechanical Filling type: isobaric Electric tank height adjustment via operator panel Capper AROL Model: Euro PK Year: 2003 Heads: 8 Rotation: clockwise Manual electric height adjustment for heads via operator panel Cap type: pre-threaded plastic caps (three-lug/corvaglia) Cap dimensions: Ø 30 mm; Height: 15 mm Distribution system: pick & place Caps Elevator MARMO Model: ALP Year: 2003 Supported cap type: pre-threaded plastic Type: mechanical Ozonizer WAB Model: ac600 Year: 2003 Labeller Kosme Model: Star Hot Melt12ts1e1 Year: 2004 Rotation: counterclockwise Manual head adjustment Heads: 12 Electronic cam Stations: 1 Label application type: hot melt Number of labels: 1 Application: wraparound label Bottle Inspector FT SYSTEM Model: 944/L Year: 2003 Bottle direction: left to right Inspection type: fiber optic Inspection: full bottles Inspection points: closure, fill level, label Shrink Wrapper DIMAC Model: Star F 30 Year: 2003 Version: film feed Type: film only Handler Twin Pack Model: MGE Year: 2003 Safety guards

Condition: used, Year of construction: 1997, operating hours: 60,000 h, functionality: fully functional, machine/vehicle number: 76, workpiece weight (max.): 20 kg, power: 70 kW (95.17 HP), total length: 6,000 mm, total width: 3,500 mm, total height: 2,300 mm, input voltage: 400 V, air pressure: 6 bar, suction capacity: 12,000 m³/h, 1) Camam machine 1997y - 2x inside x 2x outside moulder (11kW motor) - 2x inside x 2x outside paper sanding (5kW motor) total power 74 kW 2) Camam machine 2002y - 2x inside x 2x outside moulder (11kW motor) - 1x inside x 1x outside paper sanding (5kW motor) total power 60kW Bjdpfx Aov Unhgjbbjlr Machine suitable for bended elements (ex backrests), narrow longitudinal elements (legs), pieces height 120 mm, depth 65mm, rotation speed 8m/min

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Working area: 2700 x 1250 mm Z-axis travel: 160 mm Rotary axis: C-axis Spindle motor power: 8.5 kW Spindle speed: 24,000 rpm Tool changer (carousel): 8 tools (auxiliary magazine) Main tool magazine: 10 tools Saw unit along X and Y axes Vertical drills along X-axis: 8 pcs Vertical drills along Y-axis: 5 pcs Horizontal drills along X-axis: 4 pcs Horizontal drills along Y-axis: 4 pcs Tool holder type: HSK 63 Central lubrication pump Vacuum raster table Edge milling unit along X-axis Year of manufacture: 2011 Blodpfjwp R Eisx Abbjr

Condition: used, Set of machines for the production of beverages in 5-liter PET bottles. Bledju I N Npjpfx Abbjr 1) RIVI 24 carousel filling machine - machine modernized in 2013 - previously used for 1.5 L bottles (24 fillers) - number of filling heads: 12 pcs (for 5 L bottles) - capacity: approx. 1800 bph 5 L 2) ZALKIN 4 PET bottle capper - number of closing heads: 4 pcs - capacity: approx. 2000 bph Used machines, functional at the time of dismantling. Complete original technical documentation. Other offers also include semi-automatic blow molding machines for 5 L PET bottles, compressors and bottle labelers. .

Year of construction: 2025, condition: new, Carousel table dedicated for product accumulation at the end of the line Height - 900mm, adjustable 50mm Diameter - 1150mm Load - 70kg Rotation - 9rev./min Materials used: stainless steel AISI304, food grade ALU and PE Castor wheels with brakes Available on stock Bodpfx Absic Rg Rsbolr Condition: New with warranty

Condition: new, Type SX1325AP-2128 Axis: Useful working area axis X-Y-Z 2070-2800-100 mm Pieces clearance in Z 100 mm Max. traveling speed 70 m/min Max. working speed 30 m/min Bodpodz Edqjfx Abbelr Working table: Phenolic multifunction Nr. of stops standard 10 (4X-6Y) Vacuum pump 4*5,5 kW(50/60 Hz), air cooled Electrospindle: Standard power (S6) 9,5 kW, ISO30 Max. speed 24 000 rpm Tool changer: ATC carousel for 12 positions Lubrication: Automatic centralized lubrication Installation: Installed power 22-33 kW Compressed air cosumption 450 NL/min Extraction air consumption 3000 m3/h Extraction air speed 25 m/sec Suction hood diameter 2x150 mm Made in China Weight 3500 kg