Used Calibrating for sale (1,110)

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 300 mm, measuring range Z-axis: 150 mm, workpiece weight (max.): 25 kg, total height: 700 mm, total width: 570 mm, total length: 500 mm, overall weight: 25 kg, table width: 305 mm, table length: 305 mm, table load: 25 kg, ambient temperature (max.): 50 °C, ambient temperature (min.): 5 °C, maximum load weight: 25 kg, Equipment: documentation/manual, type plate available, Renishaw Equator 300 Versatile Gauge Machine Type: Co-Ordinate Measuring Machine/Versatile Gauge Year: 2020 Condition: Excellent Condition Includes Equator Shopfloor Controller Kit Equator SM25-2U Probe Kit Equator Joystick Kit Equator Power Cable UK Modus Equator Equator Enclosure Kit Equator Gauge Checker Kit M6 EQ33 Modular Fixture Plate x 2 SH25-2A Stylus Holder x 3 Styli x 2 IPC Dongle with one Licence Technical Specification Working Volume X & Y: Ø300 mm Working Volume Z: 150mm Working Volume Height from Base: 55mm Dkodpfexyungsx Aa Iou Machine Weight: 25kg Dimensions(without enclosure): 570 x 500 x 700mm Comparison uncertainty*: ±0.002 mm Probe type - scanning: Renishaw 3-axis SP25 analogue scanning Maximum scanning speed: (SP25) 200 mm/s Scanning rate (SP25): 1000 points/s Probe type - touch-trigger: Renishaw 3-axis TP20 kinematic touch-trigger Recommended touch speed (TP20): 10 mm/s Maximum movement speed: 500 mm/s Scale resolution: 0.0002 mm Fixturing requirement*: ±1 mm Machine air supply requirement: No air required Operating temperature: +5 °C to +50 °C Storage temperature: -25 °C to +70 °C Relative humidity operating range: Maximum 80 %RH at 40 °C, non condensing Machine electrical supply requirements: 100-240 V AC ±10 %, 50-60 Hz Maximum power consumption: 190 W Typical power consumption: 80-100 W Fixture plate: 305 mm × 305 mm aluminium Maximum workpiece weight: 25 kg Notes * The process of measuring on an Equator involves defining a series of gauge points on the component surface. Periodic calibration of a master part on a CMM establishes datum values for each gauge point. The same gauge points on the same master part are measured on Equator, ‘mastering’, to establish a correlation with the certified CMM. Subsequently, a regular ‘re-mastering’ process is used to account for changing environmental conditions. Size and position measurements made immediately following re-mastering will have a comparison uncertainty of ±0.002 mm relative to the certified measurements of the masterpart. This specification applies where each part is fixtured to within 1 mm relative to the master part. Peak consumption at power up. 3-axis system typical consumption based on taking touch points under DCC control. Notes: *Specifications are given in good faith but not guaranteed*

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 500 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 400 mm, number of axes: 3, This 3-axis Mitutoyo Crysta-Plus M574 was manufactured in 2010. It features a measuring range of 500 × 700 × 400 mm and includes a Renishaw MH20i probe head with a TP20 standard force probe system. The machine is equipped with a granite measuring table and multiple styli for enhanced versatility. If you are looking to get high-quality coordinate measuring capabilities, consider the Mitutoyo Crysta-Plus M574 CMM machine we have for sale. Contact us for further details. Technical Data • Measuring Range (X × Y × Z): 500 × 700 × 400 mm • Probe Head: Renishaw MH20i • Probe System: TP20 Standard Force • Probe Module: Standard Force • Scale Resolution: 0.0001 mm (0.1 µm) • Probe Ball Diameter: Ø 4 mm • Stylus Length: 20 mm • Operating Temperature: +5 °C to +40 °C • Length Measuring Error (E0, MPE): (5 + 6L/1000) µm • Single Stylus Form Error (PForm, MPE): 6 µm • Test Sphere Diameter: Ø 3.994 mm • Automatic Temperature Compensation: No • Calibration Date: 10 March 2026 Additional Equipment Dodpfx Ajzt Nq Noa Ieku • Renishaw MH20i indexing probe head • TP20 probe system • Stylus rack • Multiple styli • Granite measuring table • Machine stand

Year of construction: 1999, condition: excellent (used), Technical specifications Manufacturer: brown & sharp Type: DEA Scirocco 140907 Year of manufacture: 1999 Measuring range X = 1400 mm Y = 900 mm Z = 700 mm Equipment Renishaw PH10M indexing (tactile) probe, swiveling 7.5° - 105° Probing system TP200 + probe storage for 6 probes Dkedpsf Dvy Usfx Aa Ieu Software PCDMIS-2019-R2 Control panel with approximately 3m cable Calibration standard, diameter 15.875 HCU-Renishaw Controller B3C (DEA protocol) The machine can be modernized with new accessories according to customer requirements. Price: upon request! Installation and commissioning possible! We will gladly prepare a detailed offer for you. Note: Our offer is exclusively for specialist customers. (Changes and errors in the technical data, information, and prices, as well as prior sale, are reserved!)

Condition: as good as new (ex-display), Year of construction: 2026, Compact wide-belt sanding machine with combination sanding unit Promotional features: - Switching the sanding pad on and off from the control panel - Switching the roller on and off from the control panel - Electronic control system Fox 500 KTR - Table extension with 2 rollers, with infeed and outfeed - Automatic table positioning with push button Article number: 5222100A2 Also suitable for smaller workshops for occasional use Combination sanding unit with sanding pad for fine sanding Standard equipment includes a diagonally grooved steel roller, Ø 120 mm, for calibrating Fine adjustment of the working height Clear control panel on the front Robust, tubular-reinforced monoblock steel machine body, robot-welded, with work units mounted high up for maximum rigidity Motorized height adjustment of the work table with digital display Electronically controlled sanding belt oscillation Carpet feed via geared motor with two speeds Natural rubber feed carpet with a negative profile Flexible steel pressure bar in front of the first unit Rubber pressure rollers, in front of or behind each work unit Pneumatic belt tensioning per unit with decimal correction option for grit size/belt thickness Universally applicable for solid wood and veneer thanks to the combination unit Entry-level model for smaller companies Djdpfxogf Sw Ns Aa Ieku Working width 950 mm Equipment details: Combination unit for calibrating and sanding Diagonally grooved steel roller, Ø 120 mm, with fine height adjustment Hard sanding pad with graphite pad Universal design for calibrating and sanding solid wood, chipboard and veneer Technical data Length (product) approx. 1388 mm Height (product) approx. 1668 mm Width/Depth (product) approx. 1545 mm Connection for dust extraction Dust extraction nozzle diameter 140 mm Electrical data Connection voltage 400V Current type AC Phase(s) 3Ph Mains frequency 50Hz Power feed motor 0.33 / 0.55 kW Power height adjustment motor 0.25 kW Power drive motor 7.5 kW Sanding unit Sanding belt length 1525 mm Sanding width max. 950 mm Sanding belt width 970 mm Feed unit Feed speed 4.5 / 9 m/min Workpiece Workpiece height min. 4 mm Workpiece height max. 170 mm

Year of construction: 2000, condition: like new (used), stock-No.1919 complete set of extrusion-tools / calibrating parts , used but very good condition- very less operting hours, tools made in Germany ᐳ for the production of Dksdob Aq Hpspfx Aa Isu electric cable protection canals/ ducts, incl. punching unit to punch the fixing holes in the ready-made profiles

Condition: used, Year of construction: 2008, Overview This Ishida IX-GA-4075-D X-ray inspection system was manufactured in 2008 and is designed for high-performance product inspection in food, beverage, and pharmaceutical production environments. The system is primarily used for foreign body detection, identifying contaminants such as metal, glass, stones, and high-density plastics that may not be detected by conventional metal detectors. In addition to contamination detection, the machine can also support product integrity checks, such as identifying missing components or estimating product consistency. The system is built with a robust stainless steel construction, making it suitable for industrial environments with high hygiene requirements. The inspection process is based on X-ray imaging, where products pass through the inspection chamber via conveyor. The system analyzes density differences in real time and automatically triggers a reject mechanism if contamination is detected. Technical Data - Construction: Stainless steel frame for hygienic industrial use - HMI: Integrated touchscreen for operation, calibration, and product changeover - Electrical Data - Power supply: AC 230 V, single phase - Current: 11.0 A - Frequency: 50 / 60 Hz - Inspection Function - Detection of foreign bodies: - Metal - Glass - Stones Dkjdpfeyzc D Usx Aa Iju - High-density plastics - Additional capabilities: - Product integrity verification - Detection of missing components - Density-based inspection

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 4607269, total width: 2,100 mm, total height: 2,400 mm, total length: 2,830 mm, working width: 1,350 mm, grinding width: 1,350 mm, overall weight: 2,850 kg, grinding height: 160 mm, power: 22 kW (29.91 HP), height adjustment type: electric, type of input current: three-phase, conveyor belt speed: 20,500 mm/s, grinding belt length: 2,620 mm, workpiece height (max.): 160 mm, compressed air connection: 6 bar, grinding belt width: 1,380 mm, table height adjustment: 157 mm, power of feed motor: 1,500 W, input frequency: 50 Hz, air demand: 1 m³/h, input voltage: 400 V, operating pressure: 6 bar, workpiece width (max.): 1,350 mm, pass-through height: 160 mm, 🪵 2002 Viet Challenge 223 Wide Belt Sander – Heavy-Duty Finishing, Very Good Condition Take your wood finishing to the next level with this 2002 Viet Challenge 223 Wide Belt Sander – a high-performance sanding solution for woodworking professionals. Built in Italy for precision and durability, the Viet Challenge 223 is trusted by cabinetmakers, joiners, and production workshops across Europe. Now available in very good condition, this twin-head sander offers consistent results on solid wood, veneered panels, and composite materials – ideal for both calibration and fine finishing. ✅ Key Features – Viet Challenge 223/20 Year of Manufacture: 2002 Condition: Very good – clean, well-maintained, fully operational Sanding Heads: 2 (roughing + finishing) Working Width: 1,350 mm Working Thickness: 3 – 160 mm Minimum Workpiece Length: Approx. 400 mm Abrasive Belt Dimensions: 1,380 mm x 2,620 mm Main Motor Power: 11 kW + 11 kW (approx.) Feed Speed: Variable, 3.7 to 20.5 m/min Powered Height Adjustment Emergency Stop and Safety Features Feed Motor: 1.5kW Lifting Motor: 0.37kW Suction Speed: 25m/s Compressed Air: 6 bar Air Consumption: 17 l/min Machine Dimensions: 2830 x 2100 x 2400mm Machine Weight: 2850kg 🧱 Ideal For: Solid wood panel calibration Veneered panel sanding MDF and composite board finishing Flat panel furniture components General wood surface preparation and finishing 📦 Machine Includes: Viet Challenge 223 main sanding unit Dsdpfx Ajwnr A Hja Ieku Twin sanding heads for combined roughing & fine finish Integrated feed table and dust extraction ports Original manuals and safety guards Fully tested and ready for operation 📍 Availability & Delivery This machine is in stock and available for immediate inspection and delivery. Shipping support available throughout Ireland, UK, and Europe. 📞 Enquire Now Looking for a dependable wide belt sander with professional-grade features? This Viet Challenge 223 is a rare find at this price and condition. Viet Challenge 223 Wide Belt Sander for sale Used wide belt sander in very good condition Heavy-duty industrial sander for woodworking Woodworking sanding machine for panels Twin-head wide belt sander for solid wood Viet wide belt sander UK / Ireland / Europe Wide belt sander for furniture and cabinetry production

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles (300 x 100 mm), consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Dedpfx Aoyhcaboa Isku Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Condition: used, Year of construction: 2025, functionality: fully functional, type of input current: AC, overall weight: 1 kg, Equipment: documentation/manual, type plate available, For sale is a ZEISS T-Scan Hawk 2, a high-precision optical 3D scanner for demanding measurement and inspection tasks. Dkodpfjzyp Stsx Aa Ieu Ideal for precise 3D measurements in industry and research, especially when measuring components in challenging environments. Fast application, easy operation. Condition: Lightly used, primarily for trade shows, exhibitions, and training purposes. Scope of delivery: · T-Scan Hawk 2 Lite · Blue Class 2 laser, eye-safe (IEC 60825-1:2014) · Weight: < 1 kg · Calibration plate (DAkkS calibrated) · Sensor cable · Transport case · Incoming inspection at our facility with sphere bars according to ISO 10360 · Acceptance certificate with proof of traceability · ZEISS INSPECT OPTICAL 3D Free · Sensor driver T-SCAN Hawk 2 ZEISS INSPECT OPTICAL 3D Free · Open and edit new and existing projects · Import of point clouds, polygon meshes · Creation, editing and processing of polygon meshes · Element construction: regular geometries, points, sections, curves, surfaces, dimensions · CAD import of standard formats IGES, VDA, STEP, JT Open, STL, PLY · Application of common alignment methods · Comparison against CAD with colored deviation display · Dimensioning and form/position evaluations according to ISO GPS and ASME Y14.5 · Report module Sensor driver T-SCAN Hawk 2 · Setup and calibration · User-guided calibration · Measurement data acquisition and project management · Configurable workflow assistant

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 32.3.0218, input voltage: 400 V, type of input current: three-phase, KÖNIG ARTISAN SFC – 2012 Compact König line for the production of rustic rolls, ciabattas, and various products cut from a dough sheet. Year: 2012 Key features * Manufacturer: KÖNIG * Model: Artisan SFC * Year: 2012 * Capacity: up to 300 kg of dough/hour * Dough sheet width: up to 170 mm * Belt speed: up to 1.5 m/min * Wide feed conveyor for dough loading * Flour dusting system * Dough sheet calibration rollers * Longitudinal cutting system * Transverse cutting guillotine * Stamping/forming station * Interchangeable cutting rollers and stamping tools * Adjustment system allowing the production of many different formats Products that can be produced Depending on the tools installed: * Ciabattas * Square rolls * Rectangular rolls * Triangular rolls * Rustic products * Stamped products * Various special shapes Several cutting and stamping tools are available with the machine. The Artisan SFC works directly from a dough sheet and allows for gentle processing, particularly suitable for soft doughs and rustic products. Dsdpfx Aezyv Nxsa Ieku Machine can be viewed and tested by appointment. Photos, videos, and additional information available upon request.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Log yard with restacking unit Complete log handling system from the log receiving area to the transfer to the debarking line. The system performs automatic log handling, singulation, end trimming, metal detection, butt end reduction, debarking, 3D measurement, and sorting of the logs. Djdpfx Aaszvyl As Ijku Key technical data Capacity: approx. 30,000 m³ of logs in a single-shift operation Log diameter: approx. 160–660 mm Log lengths: 4,000–5,250 mm Special lengths up to 6,100 mm Long logs up to approx. 20 m Herzog processor head with 55 kW hydraulic unit End trimming diameter up to approx. 700 mm Integrated metal detection Hobest Primus butt end reducer for log diameters up to 900 mm EWD ER 90 debarker with rotor opening 100–900 mm Rotor drive: 45 kW, frequency-controlled Feed speed during debarking up to 30 m/min Calibrated Microtec 3D log scanner Sorting block conveyor with five hydraulic discharge stations The restacking unit automatically returns, singulates, and realigns the logs for feeding to the debarking line. It consists of, among other things, an approx. 18 m long log handling conveyor, a four-stage inclined conveyor, a 90° curved conveyor, a double-strand block conveyor, a transverse conveyor, and an integrated log turner. The restacking unit can be purchased separately if required.

Condition: new, Year of construction: 2021, machine/vehicle number: GWH432125, Working width 1,100 mm, Sanding belt dimensions 1,120 x 2,150 mm, Max. work piece thickness 160 mm, Combination sanding unit with calibrating roller D = 150 mm, Pneumatic segmented sanding shoe with insert control, Motor 15 kW (20 hp), Sanding belt speed 18 m per second, Infinitely variable feed speed 4 - 20 m/min, Feed motor 0.55 kW (0.75 hp), Electric table positioning with motor 0.24 kW and digital LCD height display, Mechanical "ECO GEAR SYSTEM" (oscillation of the sanding belt), Automatic belt centering, Automatic emergency table lowering, Check control panel, Automatic sanding roller shut-off on the control panel, Sanding grit adjustment with 6 positions for 2 rollers each in the infeed and outfeed, Dust extraction connection D = 160 mm, Machine complies with CE regulations Dimensions approx. L x W x H, 1,650 x 1,800 x 2,025 mm Weight approx. 1,300 kg, Djdpfx Ashgmmaja Ieku (Identical construction to Unitek LC 1120 1N KRT) Ex works, from warehouse Seevetal, subject to prior sale, without transport, assembly and instruction.

Condition: good (used), Year of construction: 2019, functionality: fully functional, Table surface: 7,500 x 2,500 mm Positioning speed: 40,000 mm/min Positioning accuracy: = 0.06 mm/min Repeatability: 0.05 mm/min Machine weight approx.: 2,300 kg MicroStep CNC cutting system of the MG series with the following features: - Hypertherm® XPR170™ plasma power source with automatic OptiMix™ console - Plasma rotator for weld preparation - Fully automatic oxy-fuel torch - Fully automatic drilling spindle MG-40-P26 with 26.8 kW - Steel portal driven and stiffened on both sides for a clear and precise cut - AC servo motors from Panasonic for high drive power and excellent dynamics - Durable and low-maintenance planetary gearboxes - User-friendly machine control - High reliability and long service life, even in three-shift operation - MicroStep iMSNC® machine control with MMI console and 24" touchscreen - iMSNC® module | User management - iMSNC® module | Expert system - iMSNC® module | Automatic calibration of mechanical sensing - iMSNC® module | Visualization of wear parts - iMSNC® module | Assistant for loading CNC programs - iMSNC® module | Management of cutting programs (MRP) - iMSNC® module | EcoInfo - iMSNC® module | MachineInfo - iMSNC® module | Assistant for service and maintenance operations - USB 3.0 connection for storage media - Remote maintenance module MicroStep RemoteDiagnostics® - Remote maintenance access via TeamViewer - Two LCD control units on the portal - Laser pointer with automatic offset transfer - Hypertherm® XPR170™ plasma power source - Industry-leading cut quality - X-Definition - Advanced HyDefinition technology - Automatic gas console | OptiMix™ - CNC interface for the Hypertherm® XPR170™ Connection to the CNC control - Module for automatic power control of the Hypertherm® XPR170™ - Electrical and mechanical torch sensing Dkedpfx Aajzwl Dmo Isu - Remote activation of plasma power source - Double-sided cable protection (collision protection) of the portal bridge via emergency stop - Extraction table system with oscillating conveyor OXYtrac 2580 HD Main components and dimensions: 1 Table consisting of: 4 table elements WxLxH (mm) 2,600 x 2,080 x 950 Total support area: WxLxH (mm) 2,600 x 8,320 x 950 Contiguously usable working area per table: Vertical cutting: WxL (mm) 2,500 x 8,000 Bevel cutting: WxL (mm) 2,000 x 8,000 Table width (outer): W (mm) 2,830 2 Oscillating troughs L (mm) approx. 8,900 Cutting processes and associated extraction capacity: 1x Plasma max. 170 Amp., bevel cutting 1x Oxy-fuel max. 100 mm workpiece thickness regularly 200 mm workpiece thickness occasionally

Condition: good (used), functionality: fully functional, Keyence VHX 700F Measurement Microscope in fully functional condition. - Base unit VHX 700F - Stand VHX-J20 - Objective lens VH-Z20R - Reference object (calibrated glass scale) - User manual Camera Scanning method: Progressive Image sensor: 1/1.8-inch, 2.11 megapixel CCD sensor Total pixels: 1688 (H) x 1248 (V) Effective pixels: 1628 (H) x 1236 (V) Usable pixels: 1600 (H) x 1200 (V) Frame rate: Selectable 15 fps and 28 fps Resolution: 2 megapixels, 1600 (H) x 1200 (V), approx. 1000 TV lines Gain: AUTO, NORMAL, PRESET Electronic shutter: AUTO, MANUAL, OFF, 1/15, 1/30, 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/5000, 1/9000, 1/19000 Supercharge shutter: 0.2 seconds to 17 seconds adjustable in 0.1 second increments White balance: Auto, Manual, One-touch setting, Preset (2700 K, 3200 K, 5600 K, 9000 K) Dksdpfx Aajw Ah Axs Iou Back focus adjustment: Not required LCD Monitor: 17-inch color LCD (TFT)*1 Panel size: 365.76 (H) x 228.6 (W) mm*1 Pixel pitch: 0.1905 (H) x 0.1905 (W) mm*1 Number of pixels: 1920 (H) x 1200 (W) (WUXGA)*1 Display colors: Approx. 16,770,000 colors *2*1 Brightness: 270 cd/m² (typical)*1 Contrast ratio: 450:1 (typical)*1 Viewing angle: ±80° (typical, horizontal), ±70° (typical, vertical)*1 Hard Drive 500 GB (including 80 GB reserve capacity) Approx. 2.1 million images (with compression of a 2-megapixel image) or approx. 70,000 images (if 2-megapixel images are uncompressed) Image format JPEG/HD Photo (compressed), TIFF (uncompressed) Viewable image size: 1600 pixels (H) x 1200 pixels (V) Light source: Lamp 12 V, 100 W, halogen lamp Video output: Output format DVI-I, 1920 x 1200 pixels Output Scan frequency

Condition: used, Year of construction: 2018, functionality: fully functional, Standard configuration: Control and operation: • Control system: HEIDENHAIN TNC 640 - Handwheel: HEIDENHAIN HR510 - Swiveling control panel with two 19" monitors - 3 potentiometers (feed rate, rapid traverse, speed) - 3-color status indicator light - HEIDENHAIN DCM; collision monitoring between the machine and the tool Standard configuration: Machine: - Travel range, X-axis = 1,000 mm - Travel range, Y-axis = 1,100 mm - Travel range, Z-axis = 810 mm - NC rotary table 1,000 x 800 mm with T-slots 18H7 / 100 mm, driven by a pre-loaded worm gear drive - Swivel range 1,350 mm - Direct measuring systems on all axes, manufactured by HEIDENHAIN, connected to the pneumatic system - Micro-Epsilon "Spindle Growth System" for detecting and dynamically compensating for thermally induced spindle growth - Full enclosure with a large angled door for crane loading and a quick-access door - View windows in the working area made of laminated safety glass - Coolant nozzle - Oil collection pan made of chrome steel sheet - Leveling elements - Machine paint: Blue and light gray Milling head: - Automatic horizontal/vertical swiveling milling head as a full-fledged, stepless NC axis from -1° to +90° - Speed: 16,000 min-1 - Main drive: 38 kW (100% duty cycle) - Torque: 105 / 135 / 155 Nm (100% / 40% / 25% duty cycle) - Tool holder: HSK 63-A Coolant supply: - Internal coolant supply: 30 bar, Form A, paper band filter and high-performance filter with integrated chip extraction system - Milling head external cooling via nozzle ring Dksdpszzp Tasfx Aa Iou Tool changer: - Rack magazine with 85 positions - 5-position tool loading station - Dialog-based operating panel Chip removal: - Scraper conveyor for chip removal at the front along the machine bed, chip discharge height 1,100 mm Documentation: - Acceptance test report for circularity test, laser inspection - Technical documentation in duplicate - CE declaration of conformity Milling head: Compressed air through the spindle center The compressed air can be selected via an M-function. Internal coolant supply with paper band filter: - Internal coolant supply with 80 bar (Form A) with 20 l/min, incl. paper band filter, coolant nozzle, and additional fine filter, particle size minimal 40 µm. Pressure regulation for each tool via tool table or a switch on the control panel during operation. Measuring probe and tool measurement: - Radio measuring probe BLUM TC60 incl. software adaptation, fully set up, incl. KinematicsOpt and calibration sphere on magnetic stand - TRS2 tool breakage detection system non-contact. Only suitable for tools with a solid core from 2 mm, e.g. drills, tapping drills. Additional machine options: - Oil and emulsion mist extraction Mechanical air filter 1,800 m3/h suction capacity - DXF converter - HEIDENHAIN AFC "Adaptive Feed Control" adaptive feed rate control - HEIDENHAIN ACC "Active Chatter Control" active chatter suppression

Year of construction: 2023, operating hours: 4,371 h, condition: ready for operation (used), travel distance X-axis: 460 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 660 mm, spindle motor power: 11,500 W, spindle speed (max.): 10,500 rpm, number of axes: 5, This 5-axis WALTER HELITRONIC RAPTOR DIAMOND was manufactured in 2023. It features a tool diameter capacity of Ø3-290 mm, with an optional extension up to Ø400 mm, and a maximum tool length of 270 mm. The machine is designed for the production and regrinding of carbide, HSS, PCD, and CBN tools. If you are looking to get high-quality grinding capabilities, consider the WALTER HELITRONIC RAPTOR DIAMOND cylindrical grinding machine we have for sale. Contact us for further details. • Operating hours: approx. 4,371 h • Working range: • Tool diameter: Ø3–290 mm (optional up to Ø400 mm, depending on configuration) • Maximum tool length: 270 mm (optional up to 350 mm, depending on configuration) • Maximum tool weight: 50 kg • Axes: • Number of CNC axes: 5 • Linear axis speed: up to 15 m/min • Spindle: • Max grinding wheel diameter: Ø200 mm • Interface: HSK • Belt-driven, double-ended spindle • Grinding / Eroding: • Grinding and EDM in one setup • For carbide, HSS, PCD, CBN tools • Configurable for up to 3 electrodes and 3 grinding wheels, or alternatively up to 6 grinding wheels • Control / Machine design: • WALTER / UNITED GRINDING CNC control • Enclosed working area with automatic protective door • Installed machine options/features: • Upper table • Glass scales • Reinforced A-axis, up to 750 rpm • Preparation for automatic calibration/probe • Grinding wheel measuring probe • Automatic fire suppression system with leak detection • TS-Remote Ready • Keyboard support • Oil leak sensor • Connection for external filtration system Additional equipment • Automatic loading/manipulator system for shank tools (automatic tool loader/manipulator) • Process cooling system • Coolant/dielectric filtration and circulation system • Coolant/dielectric system • Tool holders • Flanges/adapters • Grinding wheel/electrode accessories • Automation/handling: • TOP loader • 12 pallets • Filtration/cooling/extraction: • Oil mist extraction system • Extraction silencer Djdpfxezxg Tfj Aa Ieku • Oil cooling unit • Filtration system with tank and pump • Workholding/tooling: • Collets 6–16 mm • Collets 16–32 mm • 351 ES collets: 6, 8, 10, 12, 16 mm • 4 x 351 ES collet sets • Collets: 6, 8, 10, 12, 14, 16, 18, 20, 25 mm • Automatic holder 6–16 mm • Automatic E386 holder, 16–27 mm • Manual hydraulic holder, diameter 32 mm • ISO 50 socket • ISO 50 arbor • 2 x 50 mm HSK electrode holders • 4 x 45 mm HSK grinding wheel holders • Grinding wheel holder for dressing • Grinding wheel set measuring adapter • HSK calibration disc • Calibration roller • Measuring: • Heliset Plus measuring device • Software/options/packages: • Tool Studio for PC • Tool Studio Step Tools • 45-degree P-System sharpening option • P36 wood drill tooling package • Drill package • Hoger P58 package • Consumables: • 4 x 208 l dielectric fluid

Condition: used, Year of construction: 1999, Optima/WIPOTEC-OCS EC automatic continuous scale 1400-700-585 RA2392 The automatic checkweigher including conveyor belt and SEW gear motor is designed for products up to a maximum of 60 kg. Technical data (see PDF for further details) Manufacturer: Optima Control Systems GmbH (WIPOTEC-OCS GmbH) Type: EC Year of construction: 1999 Machine type: automatic checkweigher Total size: approx. 1400 x 700 x 840 mm (WxDxH) Electrical connection Nominal voltage: L1/N/PE 230V AC / 115V AC (+6 % / -10 %) Nominal frequency: 50Hz / 60Hz (+/-2 %) connected load: 1,5 KW Fuse protection: 10 A Protection class: IP 65 according to DIN 40050 Weighing technology: Type of measurement: electromagnetic force compensation Weighing range: 0 - 60000 g calibration values e: from 1g degree of accuracy: from +/- 0,5g Temperature: 5° C - 40° C relative humidity 20 - 80 Volume: the A-weighted equivalent continuous sound pressure level is below 70 db(A) Conveyor belt 1390-700-590 and SEW gear motor with brake Conveying length (FL): 1400 mm effective width (NUB): 700 mm belt width (GB): 585 mm Dsdoz Ecyrjpfx Aa Ijku hight (BH): 740-840 mm Motor Type: SEW Gearmotor Motor Power: kW 0.55/0.55 S1 Hz 50 A 2.80/1.61 Speed: 10-36 m/min total weight: 190 kg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 1998, Working width 1350 mm Number of sanding units x st. Used Machine Year of manufacture: 1998 Condition: Overhauled by a Heesemann factory technician, including a new feed belt Features and Technical Specifications: - 1 automatic belt sander with combination unit - with electronic articulated pressure beam - for sanding soft and hard veneers - calibrating and fine sanding solid wood - Calibration of workpiece carrier panels - Removal of defective veneers and coatings - Intermediate sanding of PU, hydro, UV, nitro, and polyester coatings - Sanding of barrier films - With graphical operator terminal - NC-controlled thickness adjustment from 3 to 150 mm - Activation of the calibration roller via the terminal - With patented CSD articulated pressure beam for compensating workpiece tolerances up to 2 mm Dksdpfx Aozk Nxzja Iou - Sanding width: 1,350 mm - Sanding belt length: 2,150 mm - Frequency-controlled sanding belt speed: approx. 2–18 m/sec - Sanding shoe width: 100 mm - Sanding unit drive: 15 kW - Feed speed: 5/10 m/min - Compressed air: 6 bar - Compressed air consumption: 15 NL/min - With belt dust extraction: 490 l/min - Exhaust ports: 1 x 180 mm, 2 x 100 mm - Air requirement for grinding unit: 1,800 m³/h - Required air velocity: 20 m/sec - Total power connection: approx. 17 kW - Dimensions: 2090 x 1670 x 2020 mm - Weight: approx. 2500 kg

Condition: used, mileage: 596,810 km, power: 368 kW (500.34 HP), first registration: 01/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 10/2026, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,650 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Vehicle Data: * Manufacturer / Model: MAN TGX 26.500 6x2-4 BL * Gross Vehicle Weight: 26,000 kg * Engine: MAN D2676LF51, 500 hp (368 kW), Euro 6, 2,500 Nm * Transmission: MAN TipMatic® 12-speed (Profi, road application) * Drive: 6x2 * Steerable, liftable trailing axle Chassis & Technology: * Trailing axle steerable & liftable * Rear air suspension & ECAS level control * Rear axle differential lock * Axle load display in cab * Electronic braking system MAN BrakeMatic * All-round disc brakes * EVBec engine brake * Power take-off flywheel side (for hydraulics/pump) * Rockinger 400G150A trailer coupling Safety & Assistance Systems: * Emergency Brake Assist 2 (EBA2) * ESP, ABS, ASR * Lane Guard System IV (lane departure warning) * Cruise control & electronic speed limiter (89 km/h) * Digital axle load display * Emergency brake signal (ESS) Cab & Comfort: * Medium-high sleeper cab * Air-suspended cab mounting * 2 bunks with comfort mattresses * Driver comfort seat, air-suspended, heated, with lumbar support * Air conditioning with automatic temperature control * Eberspächer D4S auxiliary air heater * Refrigerator, ambient lighting, full curtains * Electric tilting/sliding sunroof * Multifunction steering wheel Lighting & Visibility: * LED daytime running lights * LED position & tail lights * High beam & fog lights with cornering light * 2 work lights on cab roof * 2 amber rotating beacons * Reversing camera * Electrically adjustable & heated mirrors incl. kerb mirror Multimedia & Connectivity: * MAN Media Truck Advanced (7" display) * Navigation-ready + Europe navigation SD card * Digital radio DAB+ * Bluetooth hands-free (2 phones) * USB / AUX * MAN TeleMatics 2 preparation * Digital tachograph (legal for calibration, remote download-ready) Miscellaneous: * Fuel tank 590 l aluminium + 80 l AdBlue * Compressed air connection in cab * First aid kit, warning triangle, wheel chocks * CB radio Stabo XM3003e * Cab: Pure White (RAL 9010) * Chassis: Graphite Black (RAL 9011) * Rims: White Aluminium (RAL 9006) * Unladen weight: 11,750 kg * Tyres 1st & 3rd axles: 385/55 R 22.5 Dksdpfx Aozwbtdja Ieu * Tyres 2nd axle: 315/70 R 22.5 * Palfinger T20-31 hookloader * MOT: 10/2026 * Safety inspection: 04/2026 ----Internal vehicle number: 11627 Subject to errors & prior sale. WhatsApp support available! For any questions about the vehicle or further information, feel free to contact us conveniently via WhatsApp. WhatsApp WhatsApp

Condition: used, mileage: 165,358 km, power: 120 kW (163.15 HP), first registration: 09/2019, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Vehicle number (for inquiries): 28 Mercedes-Benz Sprinter 316 CDI MAXI Paint code: * 9147 Paint color Arctic White MB 9147 Interior equipment: * VF7 Fabric Maturin black Features: * AR3 Axle ratio I = 4.182 * BA3 Active Brake Assist * BH1 Hold function * BH8 Control code hydraulic aggregate version 7 * BK2 Control code wheel brake configuration 2 * C6L Multifunction steering wheel * C907 SERIES 907 VAN VS30 * CB7 Stabilization level I * CL1 Steering wheel, tilt and height adjustable * CN2 Radiator grille frame in body color * CT1 Torsional damper * D03 High roof * D50 Continuous partition wall * E07 Hill start assist * E1B Storage for smartphones incl. wireless charging * E1C Audio 25 * E1E Navigation * E1G Live Traffic capability * E2N Pro package control in NTG6 * E3M MBUX multimedia system with 7-inch touchscreen * E43 13-pin trailer socket * E46 Power socket in driver's cab * ED4 12 V 92 Ah absorbent glass mat battery * ED8 Pre-installation electrics, programmable special module * ES0 Jump-start contact * ES5 Charging package, instrument panel * EY5 Mercedes-Benz emergency call system * EY6 Breakdown management * F64 Electrically folding exterior mirrors * F68 Electrically heated and adjustable exterior mirrors * F907 SERIES 907 VAN VS30 * FF4 Overhead storage compartment * FF5 Storage above windscreen * FJ1 Folding cover for storage compartment * FJ4 Storage compartment under dashboard * FKA Panel van * FU5 Exterior mirrors without indicator lights * G42 7G-Tronic Plus automatic transmission * H15 Passenger seat heating * H16 Driver's seat heating * H1B Tachograph operation below headliner front * H1I Long-range nozzles in dashboard * H21 Heat-insulating glazing all around with band filter on windscreen * HH9 Semi-automatic climate control TEMPMATIC * HI1 Climate zone 1 (cold/comfort) * IC1 Model series C907/C910 Sprinter * IE0 Series C907 VS30 RWD * IG4 Standard * IG5 Basic * IH6 Head unit ECE/ROW * IK0 Complete vehicle * IL1 Domestic (Germany) * IL5 Left-hand drive * IR6 Wheelbase 4325 mm, rear overhang 1615 mm * IT4 3.5-tonner * J10 Speedometer km/h * J58 Seat belt warning for driver's seat * J65 Outside temperature display * JA8 Crosswind assist * JB6 Park package with 360° camera * JD6 Smart tachograph EU * JD9 Tachograph calibration, for ex-works registration * JH3 Communication module (LTE) for digital services * JI7 Initial run maintenance interval 60,000 km * K51 Misfuel protection * K56 Diesel filler cap in red * KB7 Main fuel tank 93 liters * KP6 SCR exhaust aftertreatment generation 3 * L Left-hand drive * L13 Fog lights with cornering function * L44 Side indicator lights front * L65 Ceiling light in cargo/passenger area with door contact * L94 Omission of parking lights * LA2 Light assistant * LB1 Side marker lights * LB5 3rd brake light * LC2 LED light strip in load compartment * LE1 Adaptive brake light * LX5 Europe * M40 Alternator 14V/200A * MG3 Engine OM651 DE 22 LA 120 kW (163 HP) * MJ8 ECO start/stop function * MP6 Engine version Euro VI * MQ0 OBD (On-Board Diagnostics) Level D * MS1 Cruise control * O1K Service measure NAG2-1 * OH2 Inspection update 2 Dsdpfsy Ha Ibsx Aa Ijku * P2L Cargo compartment package 2 * Q11 Longitudinal frame reinforcement * QA7 Tow bar for increased towing capacity 3.5 T * RF1 Tire manufacturer Contine

Condition: used, Year of construction: 1997, Used Machine Year of manufacture: 1997 Condition: Overhauled by a Heesemann factory technician, including a new feed belt Features and Technical Specifications: - 1 automatic belt sander with combination unit - with electronic articulated pressure beam - for sanding soft and hard veneers - calibrating and fine sanding of solid wood - Calibration of workpiece carrier panels - Removal of defective veneers and coatings - Intermediate sanding of PU, hydro, UV, nitro, and polyester coatings - Sanding of barrier films - With graphical operator terminal - NC-controlled thickness adjustment from 3 to 150 mm - Activation of the calibrating roller via the terminal - With patented CSD articulated pressure beam for compensating workpiece tolerances up to 2 mm - Sanding width: 1,100 mm - Sanding belt length: 2,150 mm - Frequency-controlled sanding belt speed: approx. 2–18 m/sec - Sanding shoe width: 100 mm - Sanding unit drive: 15 kW - Feed speed: 5/10 m/min - Compressed air: 6 bar - Compressed air consumption: 15 NL/min - With belt dust extraction: 490 l/min - Exhaust ports: 1 x 160 mm, 2 x 100 mm - Air requirement for grinding unit: 1,800 m³/h - Required air velocity: 20 m/sec - Total power connection: approx. 17 kW Dodpfxjz A H Eys Aa Isku - Dimensions: 1840 x 1670 x 2200 mm - Weight: approx. 2000 kg

Condition: used, functionality: fully functional, Year of construction: 2017, control type: CNC control, Used LVD PHOENIX FL 3015 Fiber laser cutting machine in excellent condition for sale. This is a dynamic and versatile laser cutting machine designed for precise and fast cutting of various types and thicknesses of metal sheets. The reliable LVD construction, combined with the IPG Fiber laser source, ensures high cutting quality, performance, and low operating costs. The machine is fully functional and can be inspected and tested at our warehouse. Equipment: Automatic exchangeable work tables IPG Fiber laser source – 6 kW 10 kW laser cutting head LVD Touch-L control system Automatic focus adjustment Automatic nozzle changer Automatic nozzle calibration Automatic nozzle cleaning Nozzle magazine with up to 10 positions Dodpfozhmtwex Aa Isku Automatic sheet position detection Automatic cutting gas selection (oxygen, nitrogen) Cooling system Fume extraction system Sheet cleaning comb Interface with sheet storage Technical specifications Manufacturer: LVD Model: PHOENIX FL 3015 Fiber Year of manufacture: 2017/08 Laser source: IPG Fiber Laser power: 6 kW Operating parameters Maximum sheet size: 3050 × 1525 mm X-axis travel: 3185 mm Y-axis travel: 1560 mm Z-axis travel: 130 mm Maximum table load: 750 kg Table change time: 35 s Maximum X-Y positioning speed: 140 m/min Repeatability accuracy: ±0.025 mm Maximum cutting thicknesses Structural steel (O₂): 30 mm Structural steel (N₂): 8 mm Stainless steel (N₂): 25 mm Aluminum (N₂): 25 mm Copper (O₂): 6 mm Brass (N₂): 12 mm Operating hours Power ON hours: 51,061 h Cutting hours: 24,262 h Application Ideally suited for sheet metal processing companies, metal structure manufacturers, ventilation system manufacturers, and manufacturers in the automotive, agricultural machinery, and other industries that produce precision metal products and require fast, accurate, and reliable laser metal cutting. If you have any further questions, we will be happy to answer them.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,700 kg, maximum load weight: 33,300 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 9,600 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Year of construction: 2026, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer specifications. Chassis, Saddle, and Container Fine-grain steel welded construction, saddle plate with 2 replaceable kingpins and 2 kingpin positions Container receptacles: Rear extension retracted: 1 x 20 ft or 1 x 30 ft, flush at the rear Middle telescope, 1st stage, rear extension extended, 1st stage: 2 x 20 ft or 1 x 40 ft with and without gooseneck tunnel Middle telescope, 2nd stage, rear extension extended, 2nd stage: 1 x 45 ft with and without gooseneck tunnel, and with rear overload capability Middle telescope as a nested central tube frame with pin locking with height adjustment at the rear and foldable center supports for containers without a tunnel Container guides, front, pluggable and removable Plug-in adapter for front locking, to lock containers without a tunnel from below, with a holder when not in use Rear extension mounted on rollers, with hand crank 24 tons, 2-speed support jacks, single-sided operation Rear underrun protection, extendable for 45 ft containers Half-shell fenders with anti-splash flaps according to EG Rear impact protection Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Axle spacing offset mm (combined transport) up to 44 tons gross vehicle weight Air suspension Braking System 2-line compressed air braking system Color-coded line routing for easy service Spring-loaded parking brake Djdpfxji Ri Exs Aa Ijku Tele Control Axle load adjustment for easy telescoping 2 fail-safe coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! with raise and lower valve Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal, for display on the instrument panel in the driver's cab; the truck must be prepared accordingly; no truck installation (no calibrated scale) Wheels and Tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, tail and brake lights in LED, yellow LED lighting on the sides (Note: certain tractor units may experience false diagnoses, even though the function is correct) 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connecting cable Operating Instructions Note: Transport of filled tank containers is not permitted! When transporting 45 ft containers with a short tunnel, with or without a front extension, the permissible system length from kingpin to the rear edge of the vehicle and the total length of the combination of 16500 mm will be exceeded! The rear underrun protection must be manually extended. An exemption permit according to § 70 StVZo is required! Country of Registration/ Signs Germany Type approval according to EG 2007/46 24/7 service hotline prepared for license plate holder, single-line Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paint Frame, front section + rear extension, hot-dip galvanized Rear section DB 7350 Novagrau - 10-year guarantee against rust-through or hot-dip galvanized - 15-year

Condition: used, Year of construction: 1995, Number of belts: 2 Max. working width: 920 mm Min. working height: 3 mm Max. working height: 160 mm 1st belt: Calibrating roller Design of 1st roller: Grooved steel roller Abrasive belt length 1st unit: 1525 mm Abrasive belt width 1st unit: 930 mm Abrasive belt speed 1st unit: 16 m/sec 2nd belt: Combination unit Design of 2nd roller: Grooved rubber roller Sanding shoe 2nd unit: rigid Abrasive belt length 2nd unit: 1525 mm Abrasive belt width 2nd unit: 930 mm Abrasive belt speed 2nd unit: 16 m/sec Material thickness measuring device: Yes Fixed feed rate: 4.5 + 9 m/min Control: Hand control panel Elec./pneumatic belt oscillation: Yes Infeed height: variable (lower table moves) Table stroke: electro-motoric Table display: mechanical digital display Dkjdpfszxt Agsx Aa Iou Operating pressure: 6 bar Weight approx.: 1100 kg Motor power: 11 kW Extraction diameter: 200 mm Storage location:

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, total width: 300 mm, total length: 300 mm, total height: 150 mm, overall weight: 10 kg, Equipment: documentation/manual, MarSurf M400 MarSurf RD 18 Mahr surface roughness measuring instrument with evaluation unit Brand: MAHR Model: MarSurf M 300 + feed unit RD18 Probing system: Free-floating probe system Measuring principle: Skid tracing method Probe: Inductive skid probe Measuring unit: selectable Measuring range: 350 µm Profile resolution: 8 nm Parameters: Ra, Rq, Rz (Ry (JIS) corresponds to Rz), Rz (JIS), Rmax, Rp, RpA (ASME), Rpm (ASME), Rpk, Rk, Rvk, Mr1, Mr2, A1, A2, Vo, Rt, R3z, RPc, Rmr (tp (JIS, ASME) corresponds to Rmr), RSm, RSk, RS, CR, CF, CL, R, Ar, Rx, Rv Vertical scale: automatic/selectable Horizontal scale: dependent on the cutoff Total evaluation length according to ISO/JIS: 1.25 mm / 4.0 mm / 12.5 mm Number (n) of individual measuring lengths according to ISO/JIS: selectable 1-5 Dedpfx Aez E Rkxea Ieku Scanning speed: 0.5 mm/s Probe tip radius: 2 µm Measuring force: approx. 0.7 mN - Bluetooth connection between the feed unit and the display unit. - Measurement in all directions: horizontal, vertical, and overhead. - The battery in the feed unit and the central unit was replaced in 2025. - A roughness standard for calibration is included in the feed unit. - A new measuring tip is included, Mahr PHT6-350. The device is being sold because we had to purchase a combined contour and surface measuring instrument. You are welcome to come and inspect the device. You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid VAT identification number is available. Subject to prior sale.