Used Cmm for sale (169)

Condition: like new (used), Year of construction: 2023, operating hours: 500 h, functionality: fully functional, machine/vehicle number: H32023/1001, Production line for manufacturing empty capsules Gjdoyyq Tbopfx Acmskd Consisting of: • Mixing tank for preparing HPMC solution • Dipping process system for capsule forming with drying tunnel • Cutting machine for capsule cap • Cutting machine for capsule body • Assembly machine • Sorting system with camera inspection and freely programmable individual reject • Compressed air system with refrigeration dryer and filtration system • Purified water system (under 10ppm) • Clean air system • Enclosed room with several compartments and airlock, 210 m² Turnkey solution including know-how transfer, installation, training, long-term consultancy, and technical service The system is commissioned and calibrated on-site. The plant is currently fully assembled and in production. Requirements: floor that is easy to clean, sufficient electrical power supply, adequate water supply, sufficient floor load capacity.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 300 mm, measuring range Z-axis: 150 mm, workpiece weight (max.): 25 kg, total height: 700 mm, total width: 570 mm, total length: 500 mm, overall weight: 25 kg, table width: 305 mm, table length: 305 mm, table load: 25 kg, ambient temperature (max.): 50 °C, ambient temperature (min.): 5 °C, maximum load weight: 25 kg, Equipment: documentation/manual, type plate available, Renishaw Equator 300 Versatile Gauge Machine Type: Co-Ordinate Measuring Machine/Versatile Gauge Year: 2020 Condition: Excellent Condition Includes Equator Shopfloor Controller Kit Equator SM25-2U Probe Kit Equator Joystick Kit Equator Power Cable UK Modus Equator Equator Enclosure Kit Equator Gauge Checker Kit M6 EQ33 Modular Fixture Plate x 2 SH25-2A Stylus Holder x 3 Styli x 2 IPC Dongle with one Licence Technical Specification Working Volume X & Y: Ø300 mm Working Volume Z: 150mm Working Volume Height from Base: 55mm Machine Weight: 25kg Gkjdpfsxyungex Acmod Dimensions(without enclosure): 570 x 500 x 700mm Comparison uncertainty*: ±0.002 mm Probe type - scanning: Renishaw 3-axis SP25 analogue scanning Maximum scanning speed: (SP25) 200 mm/s Scanning rate (SP25): 1000 points/s Probe type - touch-trigger: Renishaw 3-axis TP20 kinematic touch-trigger Recommended touch speed (TP20): 10 mm/s Maximum movement speed: 500 mm/s Scale resolution: 0.0002 mm Fixturing requirement*: ±1 mm Machine air supply requirement: No air required Operating temperature: +5 °C to +50 °C Storage temperature: -25 °C to +70 °C Relative humidity operating range: Maximum 80 %RH at 40 °C, non condensing Machine electrical supply requirements: 100-240 V AC ±10 %, 50-60 Hz Maximum power consumption: 190 W Typical power consumption: 80-100 W Fixture plate: 305 mm × 305 mm aluminium Maximum workpiece weight: 25 kg Notes * The process of measuring on an Equator involves defining a series of gauge points on the component surface. Periodic calibration of a master part on a CMM establishes datum values for each gauge point. The same gauge points on the same master part are measured on Equator, ‘mastering’, to establish a correlation with the certified CMM. Subsequently, a regular ‘re-mastering’ process is used to account for changing environmental conditions. Size and position measurements made immediately following re-mastering will have a comparison uncertainty of ±0.002 mm relative to the certified measurements of the masterpart. This specification applies where each part is fixtured to within 1 mm relative to the master part. Peak consumption at power up. 3-axis system typical consumption based on taking touch points under DCC control. Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, Wenzel RS 1012 CNC 3D Coordinate Measuring Machine The Wenzel RS 1012 is a CNC 3D coordinate measuring machine (CMM) with a horizontal arm design, intended for the precise measurement of medium to large-sized workpieces such as components and assemblies. The machine concept is based on a stable cast iron or granite base plate serving as a measuring table, with a guide system attached to the side, which allows for open loading from three sides. Technical Key Components & Specifications Machine Type: Horizontal Arm 3D Coordinate Measuring Machine (CMM) Manufacturer: WENZEL Präzision GmbH Model / Year of Manufacture: RS 1012 / 2002 Serial Number: 023116 Measuring Volume (X/Y/Z): 2,000 mm × 1,000 mm × 1,200 mm Probing System: Renishaw PHC10-3 PLUS (interface/controller for motorized rotary/swivel head PH10) Design: Horizontal Arm Measuring Machine (Column Measuring Machine) with integrated base plate Measuring Accuracy (MPE): 15.0 μm + (L / 45.0 mm, total maximum length measuring error in the measuring range is approximately 50.0 micrometers) Sensor System (Standard Configuration): Godpezz Hywsfx Acmekd Delivery without PC Key Features of the RS Series High Flexibility: The machine generally does not require a special foundation and can be flexibly integrated into existing production and laboratory spaces. Unrestricted Accessibility: Due to the side-mounted guide of the horizontal arm, the measuring table is freely accessible, which facilitates the loading of heavy workpieces by crane or forklift. Multisensor Technology: In addition to tactile probing systems (such as the TP20), the series can often be equipped with optical line lasers or scanning sensors by the manufacturer. "One-stop shop: We would be happy to offer you suitable financing for your project." More items – new and used – can be found in our shop! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2016, total height: 2,411 mm, total width: 888 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, overall weight: 390 kg, table load: 300 kg, product length (max.): 929 mm, number of axes: 3, This 3-axis NIKON BENCHMARK 654 MAN (ALTO 6.5.4 CMM) was manufactured in 2016. It features a documented stroke of 500 mm in the X-axis, 400 mm in the Y-axis, and 440 mm in the Z-axis. The machine has a maximum part load capacity of 300 kg and includes a Renishaw MH20i manual indexable probe head. If you are looking to get high-quality measurement capabilities, consider the NIKON BENCHMARK 654 MAN CMM we have for sale. Contact us for further details. • Voltage: 230 V • Frequency: 50 Hz • Power: 600 W Godpo Airylefx Acmokd • Max current: 10 A • CMM operating pressure: 0.42 MPa • Air flow: 90 Nl/min • Documented machine dimensions (ALTO 5.4.4): 929 mm (W) x 888 mm (L) x 2411 mm (H) • Installed probe head: Renishaw MH20i manual indexable probe head • Condition: Mint condition; used a few times; stored in dry warehouse Additional equipment • Renishaw calibration sphere mounted to granite bed

Condition: used, FARO Mobile 3D coordinate measuring arm / Portable CMM FARO Titanium Arm 2.4 m measuring range · Single Point 0.051 mm · Volumetric ±0.072 mm For sale is a used mobile 3D coordinate measuring arm from the manufacturer FARO. The measuring system is suitable for industrial measuring and testing tasks, quality assurance, component measurement, manufacturing metrology, and for general geometric measuring tasks. Technical data: Manufacturer: FARO Model: Titanium Arm Device type: Mobile 3D coordinate measuring arm / Portable CMM Date of manufacture: 06.12.2004 Revision: 21.0 Made in Switzerland Measuring range: 2.4 m Single Point: 0.051 mm Volumetric: ±0.072 mm Certification date according to nameplate: 07.06.2016 PLANOLITH granite measuring plate: Accuracy class: DIN 876/1 Permissible deviation: 0.022 mm Actual deviation: 0.00498 mm Test date: 03.11.2003 Weight of granite plate: approx. 460 kg Dimensions of measuring table: approx. 1200 × 800 × 940 mm (L × W × H) Total weight of measuring table: approx. 560 kg Equipment: FARO Titanium Arm PLANOLITH granite measuring plate with substructure FARO transport case Measuring probe and measuring accessories as shown in the pictures Accessories case Magnetic clamping plate Connection cable FARO manuals and documentation Software and data carriers as shown in the pictures Further accessories as shown in the pictures Areas of application: 3D coordinate measurement Quality assurance Component measurement Component inspection Manufacturing metrology Tool and fixture construction Scope of supply: 1 × FARO Titanium Arm 3D coordinate measuring arm 1 × PLANOLITH granite measuring table with substructure Transport case, measuring accessories, documentation and accessories as shown in the pictures Gjdpfx Acoz Hm Ngomjkd Condition: Used Optical condition as shown in the pictures Nameplates present The table shown in the photos and any other items not explicitly mentioned are not part of the sale. Shipping by freight forwarder is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: ready for operation (used), Tesa Micro-Hite 3D Measuring Device, Coordinate Measuring Machine Travel range: X-axis: 460 mm Y-axis: 510 mm Z-axis: 420 mm Dimensions (machine) Footprint approx.: 1,060 × 870 mm Height: approx. 1,320 mm Geds Ah Dwajpfx Acmjkd Load & Weight Max. part weight: 227 kg Net weight machine: approx. 210 kg Accuracy MPE_E (Length measuring deviation): 3+4L/1000 µm (L in mm) MPE_P (Repeatability): 3 µm Accessories: Probe Measuring prisms Tesa USB stick Technical description has been adopted. You are welcome to visit us for an inspection. We can gladly arrange affordable shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations in technical data as well as errors in the description of the item may occur and are subject to change.

Condition: ready for operation (used), Year of construction: 2022, travel distance X-axis: 1,600 mm, travel distance Y-axis: 2,400 mm, travel distance Z-axis: 1,000 mm, overall weight: 11,000 kg, number of axes: 3, This 3-axis ZEISS ACCURA 16/24/10 3D CMM was manufactured in 2022. It features a measuring range of 1,600 mm in the X-axis, 2,400 mm in the Y-axis, and 1,000 mm in the Z-axis, with a maximum workpiece weight capacity of 4,000 kg. Equipped with the ZEISS VAST Scanning Head, it offers high-speed data acquisition and sub-micron accuracy. If you are looking to get high-quality measurement capabilities, consider the ZEISS ACCURA 16/24/10 machine we have for sale. Contact us for further details. Godpfj Ad Nxrsx Acmokd • Maximum workpiece weight: 4,000 kg • Equipped with: ZEISS VAST scanning head • Sensor capability: Active scanning for high-speed data acquisition; sub-micron accuracy for complex geometries, bores, and deep features • Service/Certification: Maintained and calibrated annually by original ZEISS service technicians; accuracy documented and certified to international standards

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: N0038312, measuring range X-axis: 500 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 400 mm, Equipment: documentation/manual, type plate available, For sale: Manual Mitutoyo Crysta Plus M 544 CMM – complete, calibrated 2023 Manual Mitutoyo Crysta Plus M 544 three-dimensional measuring machine (CMM) for sale. Features: - Measuring volume: X=500 mm / Y=400 mm / Z=400 mm - Serial number: N0038312 — Ref. 196-472-NL - MCOSMOS V2.4R12 software (GEOPAK + PartManager) - Renishaw MH20i + TP20-SF probing system Included in the sale: Gkodpfx Acsy U Urdsmsd - Dedicated PC (Windows XP Pro, HP monitor, keyboard/mouse) - Complete probe kit (cross with 4 probes Ø1mm, Ø2, Ø3, Ø4) - Calibration sphere Ø19.9956 mm with ISO 17025 certificate (2023) - Mitutoyo France calibration certificate No. 23042801 — compliant, May 2023 - Complete operating manuals (GEOPAK v2.0 and v2.4, Geopak-Win Editor, PartManager) Machine can be viewed and tested while powered on. For sale due to internal reorganization. In perfect working order.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, warranty duration: 1 months, Equipment: documentation/manual, type plate available, ZEISS LineScan 2-50 optical laser line scanner, manufactured May 2019. Manufacturer: Carl Zeiss MT GmbH Order No.: 600780-9441-000 Gkodpfxozvrmxj Acmsd Serial No.: 21901006 CE compliant, Laser Notice No. 50 (2007) Complete with case as pictured

Condition: ready for operation (used), Year of construction: 2020, total height: 2,700 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, overall weight: 2,350 kg, product length (max.): 2,100 mm, number of axes: 3, This 3-axis EROWA CMM Qi was manufactured in 2020. It features a travel range of 600mm on the X-axis, 700mm on the Y-axis, and 500mm on the Z-axis. The machine can handle a maximum workpiece weight of 650kg and includes advanced components like the PH10MQ touch probe system and FCR25-L6 touch probe changer. Ideal for precise measurements in quality control processes. Contact us for more information about this machine. • Max. distance between table and probe holder (without probe): 668 mm • Max. distance between columns at table height: 650 mm • Usable granite slab area: 650 x 1700 mm • Max. loadable workpiece weight: 650 kg Additional equipment • PH10MQ touch probe system with SP25M-2 • FCR25-L6 touch probe changer • ARCO Presoft software Gkodpfxsx D Hvqo Acmsd

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 62286233, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 200 mm, total width: 1,303 mm, total length: 776 mm, total height: 1,004 mm, overall weight: 324 kg, workpiece weight (max.): 20 kg, Equipment: documentation/manual, 📏 As New Mitutoyo QV Active 404 CNC Vision Measuring System for Sale – High-Precision, Non-Contact Metrology Upgrade your inspection capabilities with the Mitutoyo QV Active 404, a cutting-edge CNC vision measuring system designed for fast, accurate, and repeatable 2D and 3D non-contact measurements. This used unit offers premium Mitutoyo performance at a cost-effective price—ideal for precision manufacturing, quality control labs, and R&D environments. Condition: Never Used – Still in original crates 🔧 Product Overview – Mitutoyo QV Active 404 The Mitutoyo Quick Vision Active 404 is part of Mitutoyo’s renowned Quick Vision series, combining fast automatic measurement, superior accuracy, and flexible lighting systems. It’s equipped with CNC stage movement, a high-resolution camera, and QVPAK software, providing automated, high-accuracy vision-based inspection in one compact footprint. This machine is still in its original crates and is in as new condition, making it a perfect solution for any business requiring advanced metrology tools without the cost of new equipment. ✅ Key Features of the Mitutoyo QV Active 404 📐 Automatic 3-Axis Measurement (X/Y/Z) with CNC stage 🔍 Non-Contact Vision Measurement – Ideal for fragile or micro-scale parts 🧠 QVPAK Software – Industry-leading metrology software for automated routines, reporting, and part programming 💡 Advanced Illumination System – Includes ring light, coaxial light, and programmable sub-stage lighting 🔧 Motorized Zoom Lens for flexible magnification and measurement precision 🖥️ Real-Time Edge Detection for ultra-precise dimensional analysis 📐 Technical Specifications Measurement Range: X400mm / Y400mm / Z200mm Vision Head Range: 400x400x200mm Size of Stage Glass: 466x480mm Max Stage Loading: 20kg Resolution: 0.1 µm Accuracy (E1): ±(2.5 + 4L/1000) µm Touch Probe Accuracy: (2.4+3L/1000) µm Stage Type: Motorized CNC, granite base Camera: High-resolution digital CCD Lighting System: Multi-source - ring, coaxial, contour Magnification Change System: Zoom optical system with 8 positions Lens System: Motorized zoom Sensor Type: High resolution CMOS colour camera Software: Mitutoyo QVPAK Machine Dimensions: 776x1303x1004mm Weight including Stand: 324kg 🧰 Perfect For Precision component manufacturers Aerospace, automotive, medical device inspection Electronics & PCB measurement R&D and dimensional analysis labs Tool & die makers and high-accuracy workshops 📦 What’s Included Used Mitutoyo QV Active 404 CNC Vision Measuring System Machine Stand Work Station Master Ball Stand MCR Attaching Plate Calibration Ring QVPAK Software Dell Computer Wide Screen Monitor Printer Used Mitutoyo QV Active 404 for sale Mitutoyo vision measuring system CNC non-contact measuring machine QVPAK software system Pre-owned Mitutoyo CMM Vision metrology machine UK / EU Mitutoyo Quick Vision Active measuring device Godowqrvljpfx Acmokd Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, Keyence KEYENCE XM-2000 with XM-H1000 – 3D Coordinate Measuring System (CMM) Year of manufacture: 2020 Professional handheld measuring system for precise 3D measurements directly in the production environment. Item description: For sale is a used KEYENCE XM-2000 coordinate measuring system, including the XM-H1000 handheld probe. This innovative system enables precise 3D measurements directly at the workplace – without a measuring room, without complex setup, and without specialized CMM knowledge. The device is ideally suited for manufacturing companies, quality assurance, initial sample inspection reports (ISIR), in-process controls, and reverse engineering. Technical data – KEYENCE XM-C1000 / XM-H1000 (XM series) Measuring system (general) Feature: Measuring range (XYZ) approx. 600 × 300 × 200 mm (depending on the configuration) Measuring accuracy ±(8 + L/80) µm (L = measuring length in mm) Repeatability ±3 µm (typical) Resolution 1 µm Measuring principle - Optical tracking with camera-based detection Calibration - User calibration possible with calibration sphere CAD comparison - Directly on the device (STEP, IGES, etc.) Export formats - PDF, Excel, CSV, DXF Tolerance evaluation - Automatic with color comparison XM-C1000 – Control and evaluation unit (controller) Gjdpfszii Dnox Acmekd Component: Display - 15-inch touchscreen Connections - USB, LAN, HDMI, power connection Storage options - Internal + USB export Software functions - Measuring, CAD comparison, report generation Operation - Touchscreen + button operation Languages - Multilingual (including German) XM-H1000 – Handheld measuring probe Feature: Probe type - Handheld with push button Feedback - LED status indicator, vibration signal Probe tip - Replaceable, various tips available Tracking - Detected via the controller's camera system System properties Feature: Operating temperature: 10 – 35 °C Voltage supply: 100–240 V AC, 50/60 Hz System size (complete) - approx. 800 × 600 × 800 mm (depending on the configuration) Weight (total system) - approx. 25–40 kg (depending on the configuration) Mounting - On table or optional measuring table Scope of delivery: KEYENCE XM-2000 control and evaluation unit KEYENCE XM-H1000 handheld measuring probe XM-C1000 (controller) Camera unit / tracking module Connection cables and power supplies Condition: Used, fully functional, in very good condition. Shipping & delivery: Shipping by freight forwarder Self-collection possible by arrangement. International shipping possible upon request. If you have any questions, require further information, or would like to arrange a viewing appointment, please do not hesitate to contact us. (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: reconditioned (used), Year of construction: 2025, operating hours: 16 h, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 300 mm, warranty duration: 12 months, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, input voltage: 230 V, year of last overhaul: 2024, Equipment: documentation/manual, lighting, type plate available, On behalf of the customer: 3D coordinate measuring machine Hexagon Optiv443 used multi-sensor CMM with camera, probe Complete acceptance before delivery including calibration certificate! Optionally available services: delivery, commissioning, on-site calibration, training, program creation for immediate start of measurements! • Measuring range of individual sensor: 400x400x300mm • Dimensions: 1232x910x1663mm • Weight: approx. 940kg • Max. workpiece weight: glass plate approx. 30kg Mufjyo • Accuracy: MPEE = 2.9 + L/100 [?m] • Year of manufacture 2014 • Software: Vision3D with option for Opticheck3D • Incl. camera with CNC zoom • Incl. 6-way probe changer • Incl. switching probe HP-TM • Incl. LED ring light Gsdpfxsd Ah Nxj Acmekd • Incl. calibration standard • Incl. 2-monitor operation • Incl. new Windows 10 Professional evaluation station • Incl. Opticheck3D 4.5 evaluation software (12 months free software update) SYMBOL IMAGE (sister machine)

Condition: used, Year of construction: 2003, Coordinate Measuring Machine Wenzel LH 54 (Year of Manufacture 2003) in well-maintained and fully functional condition. The machine is built on a stable granite structure combined with air-bearing guides. This allows the portal and axes to move almost frictionlessly and smoothly over the granite—a proven foundation for high measurement accuracy and repeatability. The LH 54 is designed for reliable use in quality assurance as well as in series production and delivers consistent measurement results even during continuous operation. Before delivery, the machine is inspected and test-run by our service technicians in Remscheid, ensuring full functionality. The system is currently powered on and can be viewed and demonstrated at any time. PC System (modernized): After purchase, a completely new PC system will be installed, meeting WENZEL’s current requirements. This system is fully up to date and thoroughly tested before the machine is finally handed over to the buyer. Optional Services (upon agreement): - Installation and commissioning of the measuring machine within NRW - Issuance of a factory calibration certificate - Determination of length measurement uncertainty - Determination of probing uncertainty - Determination of repeatability range - Execution in accordance with DIN EN ISO 10360-2:2010-06 - Maximum measuring volume diagonal: 4,660 mm - Determination of probing uncertainty according to DIN EN ISO 10360-5:2020-11 - Including full documentation - DAkkS calibration by the accredited Klostermann calibration laboratory - Accreditation number: D-K-17518-01-00 - Accredited according to DIN EN ISO/IEC 17025:2018 Gkedpfx Acoy Dcivsmod - Training for the WM | Quartis measuring software - Custom programming for your components Additional Information: On request, the machine can be retrofitted with the proven Renishaw SP25M probe. The retrofit includes additional service work and complementary hardware components, which will adjust the purchase price accordingly. Additional software modules, custom adaptations, as well as individual accessories and clamping systems are available on request—optimally tailored to your specific measurement requirements. Measuring range X: 500 mm Measuring range Y: 1.000 mm Measuring range Z: 400 mm Measurement uncertainty: Eo = 2,5 + L/300 [μm] Installed software: WM | Quartis R2026-1 Controller: WPC2040 Basic PC System: Windows 11 (current configuration) Probing system: TP20 Probe head: PH10T Probe module: 1 × TP20 Standard Force Module head interface: PHC10-3 PLUS Probe interface: PI200 (Combi) Joystick: HT400 Exchange bridge: MCR20 (empty) Accessories: Stylus kit M2 | Mouse & keyboard | 2 × 24" TFT monitors | Printer Included services: Final inspection upon purchase | Disassembly and transport preparation | Packing | Loading onto customer-provided truck Included transport frame: On loan

Condition: used, FARO Measuring arm / 3D coordinate measuring arm FARO Prime measuring arm Mobile 3D measuring system / Portable CMM for industrial metrology For sale is a used FARO Prime measuring arm including accessories, transport case, and HP laptop. The measuring arm is suitable for mobile 3D measurements, quality control, component testing, reverse engineering, toolmaking, fixture construction, and industrial metrology. Technical data Gsdpfezc Erpjx Acmskd Manufacturer: FARO Technologies Type: Prime Device type: Portable 3D coordinate measuring arm / Portable CMM Date of manufacture: 10.09.2013 Calibration date according to certification: 25.06.2015 Revision: 28.1 Made in Switzerland Measuring range: approx. 1.8 m (6 ft) Axes: 6 Single point accuracy: 0.019 mm Volumetric accuracy: ±0.027 mm Repeatability: up to 0.016 mm Bluetooth wireless technology Integrated battery operation Temperature compensation Portable measuring arm technology USB interface Compatible with multiple probe systems Weight of measuring arm: approx. 9.3 kg Total weight including case and accessories: approx. 35 - 50 kg Equipment Mobile FARO Prime measuring arm Reference sphere / Calibration sphere Measuring probes / Probe set Base plate / Mounting plate Transport case HP EliteBook laptop Software data carrier USB dongle Operating instructions / Manuals Accessories according to pictures Application areas 3D coordinate measuring technology Quality assurance Incoming goods inspection First article inspection Component control Reverse engineering Tool and mold making Fixture construction Mechanical engineering Automotive industry Aerospace technology Condition Used Optical condition according to pictures Scope of delivery as shown in the pictures A complete technical function test has not been carried out Scope of delivery 1x FARO Prime measuring arm 1x Transport case 1x HP EliteBook laptop 1x Reference sphere 1x Base plate Measuring probes / Probe set Software data carrier USB dongle Documents and other accessories according to pictures The table shown in the photos, or other items not explicitly mentioned, are not part of the sale. Shipping or freight forwarding is possible. Subject to change, errors and prior sale. We are happy to answer any further questions by telephone.

Condition: used, Measuring head (CMM) rigid probe RENISHAW type PH5 + TP20 + PEL1-50 Measuring probe for measuring machine Serial: 77501 - A Probe holder Probe body TP20 for interchangeable modules (probe modules) Extension - type PEL 1, length 50 mm Gksdpfornagpox Acmsd Probe mounting M8 thread Head mounting with MS shaft Ø 9.5 mm - Status display with 2 LEDs - Cable connection via 5-pin DIN 180° socket - 5 M8 threaded connections for probes (4 blanking plugs) total weight 280g used in good condition

Condition: used, Year of construction: 2020, operating hours: 11,000 h, functionality: fully functional, machine/vehicle number: 192821242, spindle bore: 63 mm, spindle speed (min.): 20,000 rpm, spindle speed (max.): 20,000 rpm, total length: 4,950 mm, total width: 5,500 mm, total height: 3,779 mm, workpiece weight (max.): 1,300 kg, type of input current: three-phase, spindle motor power: 35 W, overall weight: 18,000 kg, travel distance X-axis: 670 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 600 mm, workpiece weight between centers: 1,300 g, spindle diameter: 70 mm, workpiece diameter between centers: 1,040 mm, distance between centers: 800 mm, workpiece length between centers: 820 mm, FOR SALE: 5-AXIS CNC AND 3D CMM MEASURING DEVICE 1. MACHINE: AXILE G8 (5-AXIS) • Model: January 2020 (Serial No: 192821242) Gsdpfx Acs Ahxq Iemokd • Condition: Operational in our Istanbul Tuzla factory. • Operating Hours: Only 11,000 hours. • Control Unit: Heidenhain TNC 640 (5-Axis Simultaneous) • Spindle: 20,000 RPM (Built-in Kessler) • Capacity: 670 x 820 x 600 mm / Table: Ø800 mm (1300 kg load) • Extras (Included in the Price): 37 HSK tool holders, Schunk vise, and aluminum riser (for clamping parts up to Ø1040 mm). • Price: 315,000 Euro NOTE: Our machine has been meticulously used in defense industry and precision mold-making projects. It can be inspected on-site. Delivery is EXW (Ex Works). Please call for details.

Condition: like new (used), Machine like in new condition. Only used for a few demos on products. Gksdpfx Aj Ahxw Ajcmjd Ask for additional information!

Condition: used, Year of construction: 2004, WENZEL SCM 500 Smart Coordinate Measuring Machine in well-maintained and fully functional condition. The machine features a robust and compact design, specifically engineered for flexible use directly in the production environment or inside the measuring room. Combined with high-precision guideways, this proven structure ensures excellent measuring accuracy, stability, and outstanding repeatability within a minimal footprint. The SCM 500 Smart is designed for reliable, fast deployment in quality assurance as well as near-line series production, delivering consistent measuring results even under demanding shop-floor conditions. Prior to delivery, the machine will be fully inspected and subjected to a test run by our service technicians in Remscheid to guarantee complete functionality. The system is currently powered up and can be inspected and demonstrated at any time. PC System & Operating System (Upgraded): The machine is already equipped with a modern, high-performance PC system running the latest Windows 11 operating system. The entire configuration meets the current requirements of WENZEL, has been comprehensively tested, and operates with absolute stability, ensuring the CMM is immediately ready for integration into your processes. Optional Services (Subject to Agreement): - Installation and commissioning of the measuring machine within NRW (North Rhine-Westphalia) - Generation of a factory calibration certificate - Determination of length measurement uncertainty - Determination of probing uncertainty - Determination of repeatability range - Execution in accordance with DIN EN ISO 10360-2:2010-06 - Determination of probing uncertainty in accordance with DIN EN ISO 10360-5:2020-11 - Including full documentation - DAkkS calibration by the accredited Klostermann calibration laboratory - Accreditation number: D-K-17518-01-00 - Accredited according to DIN EN ISO/IEC 17025:2018 - Training courses for the WM | Quartis measuring software - Contract programming for your components Additional Information: Upon request, the machine can be retrofitted with a suitable Renishaw probe system (e.g., PH10 or other upgrade options). The retrofit includes additional services as well as supplementary hardware components, which will adjust the purchase price accordingly. Further software modules, customizations, individual accessories, and clamping systems are available upon request – perfectly matched to your specific measurement requirements. Measuring range X: 500 mm Measuring range Y: 450 Measuring range Z: 400 mm Measurement uncertainty: Eo = 8,0 + L/250 [μm] Installed software: WM | Quartis R2026-1 Controller: WPC2030 PC System: Windows 11 Probing system: TP20 Probe head: PH6 Gsdjzkug Rjpfx Acmjkd Probe module: 1 × TP20 Standard Force Module Joystick: HT400 Accessories: Stylus kit M2 | Mouse & keyboard | 2 × 24" TFT monitors | Printer Included services: Final inspection upon purchase | Disassembly and transport preparation | Packing | Loading onto customer-provided truck

Condition: used, Year of construction: 2008, measuring range X-axis: 500 mm, measuring range Y-axis: 450 mm, measuring range Z-axis: 400 mm, Coordinate measuring machines Manufacturer: WENZEL Type: smart CMM Year of manufacture: 2008 Technical specifications: Measuring range X-axis: 500 mm Measuring range Y-axis: 450 mm Measuring range Z-axis: 400 mm Condition: used Accessories, tools, and clamping devices shown are included in the scope of delivery only if this is explicitly stated in the additional information. Subject to changes and errors in the technical data and information; prior sale reserved! Gksds Agw H Nepfx Acmsd

Condition: repair required (used), functionality: unexamined, measuring range X-axis: 500 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 300 mm, Measuring range appx. 500x400x300 Gksdpfxevmd Ruj Acmsd - with computer, but without software and probe - incl. DCC controller (probably working) - was equiped with PH10M and SP25M for spares or retrofit only

Condition: as good as new (ex-display), Demo device with less than 20 operating hours // BEST CONDITION System: Optiv M 6.6.4 multi-sensor coordinate measuring machine with Dual Z technology Probes and sensors: - 10x CNC motor zoom with digital color camera and 12-segment LED ring light - HPsS-X1H Scanning Sensor with HH-A-T5 - HP-S-X1C/H stylus holder (1xM3) - M3 stylus kit for HP-S-X1C sensor - HR-X button rack for HP-S-X1C/H (3 ports, L=400) - Sensor calibration unit without calibration artifacts - Glass standard 25mm - Ring gauge 20mm Computers and software: - Measurement and evaluation software PC-DMIS CAD++ - Machine control unit BEST - Dell 27" monitor - work table Optional accessories: - Chromatic white light sensor (CWS) - CWS measuring head 3mm - Solara.MP12 - QA STAT 12 - O-QIS 12 Delivery, commissioning and other services on request Gkodpfx Acjncfd Remjd If desired, the measuring device can be converted from OptiCheck3D V 5.0

Condition: good (used), Year of construction: 2012, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 200 mm, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 200 mm, input voltage: 230 V, Equipment: lighting, type plate available, Year of manufacture: 2012 Tactile: Vast XXT E0 X/Y (1D) in [μm] at 20 ±2 °C 1.7 + L/250 E0 XY (2D) in [μm] at 20 ±2 °C 1.7 + L/250 E0 (3D) in [μm] at 20 ±2 °C 1.9 + L/250 Scanning probing deviation MPE according to ISO 10360-4:2000 THP at 2.7 [μm] Single probe probing deviation form MPE according to ISO 10360-5:2010 PFTU 1.9 [μm] Camera system: Zeiss Discovery 12 EB X/Y (1D) 5) in [μm] at 20 ±2 °C 1.7 + L/250 EB XY (2D) 5) in [μm] at 20 ±2 °C 1.7 + L/250 Probe deviation MPE according to ISO 10360-7:2011 PF2D 5) 1.7 [μm] Probe deviation of the image processing system MPE according to ISO 10360-7:2011 PFV2D 5) 1.2 [μm] Gedpjuq Nfhjfx Acmokd Possible services: delivery, commissioning

Condition: used, Original ZEISS CMM Probe Holders and Stylus Extensions Original ZEISS probe holders Stylus extensions Various star styli and straight styli As shown in the pictures Condition: Used Good working condition Carefully removed from a functioning ZEISS CMM Gkodpszg Eczofx Acmed Ideal for ZEISS CMM users looking for original replacement or additional probing equipment.

Condition: used, Year of construction: 2014, Measuring machine Zeiss CMM Pro T2 advance 16/21, year of manufacture 2014 – in very good condition • Standard numerical control panel • Base plate dimensions: Gkedpew D R Nqefx Acmsd Length: 4,000 mm Width: 2,000 mm Height: 640 mm Total system height approx. 4,500 mm • Measuring range: X-axis: 3,200 mm Y-axis: 1,600 mm Z-axis: 2,100 mm • Permissible workpiece weight: approx. 5,000 kg Software: Zeiss Caligo BASIS CNC, Zeiss Caligo QS-STAT • Length measurement deviation according to ISO 10360-2: MPE-E = (27 + L/80)μm