Subfamily:
F9y70m2
Lower grinding device
Tipologia:
Calibration grinding and finishing
Max. processable width:
1350 mm
Min. processable starch:
4 mm
Max. processable starch:
200 mm
Working level:
yes
Height:
adjustable
Drift carpet:
yes
with adjustment of the speed of NC:
...
Technical data:
Or7hv
- sanding width: 1100mm
- 1. roller: steel (18,5 KW)
- 2. roller: rubber 70 - 80 Sh (15 KW)
- 3. pressure bar with sections (12,5/16 KW, in rotation / counter rotation, 2 speeds 10 u. 20m/sec)
- rotating cleaning brush
- 3x cleaning units for sanding belt
- vacuum table
- transport belt flat and with holes
- manual in German
- spare part list
- weight approx. 4,5t
Combination unit for calibrating/sanding with steel roller, hard sanding shoe, working width/height 630/160 mm, motor 7,5 Kw, feed 4,5/9 m/min,workpiece length/height min. 310/3 mm,
operating pressure 6 bar, motorized height adjustment, electronic sanding belt oscillation, automatic motor brake for immediate/stop,
suction nozzle 120 mm
Suimeg
Tool Calibration Machine
Kmrbxwaz
SKU:stroj-za-umjeravanje-alata
Subfamily:
Upper grinding device
Tipologia:
Calibration Grinding and finishing
Max. processable width:
1350 mm
Min. processable starch:
4 mm
Max. processable starch:
200 mm
Working level:
yes
Height:
adjustable
Drift carpet:
yes
with adjustment of the speed of NC:
yes
...
Subfamily:
Grinding device for edges
Tipologia:
Grinding and finishing
Max. processable width:
1400 mm
Max. processable starch:
140 mm
Working level:
yes
Height:
fixed for processing in line
operating units:
4
1
Bnc0ysxi2m
Aggregate: grinding device
...
Subfamily:
Grinding device for edges
Tipologia:
Solid wood
Max. processable width:
300 mm
Working level:
yes
Height:
fixed for processing in line
operating units:
4
1
Aggregate: grinding device
Aggregate: with belt
with positioning of NC: yes
...
Subfamily:
Upper grinding device
Tipologia:
Solid wood
Max. processable width:
1350 mm
Drift carpet:
yes
Blower for negative pressure of the carpet:
yes
Anz. Blowers:
1
Engine power:
4 KW
operating units:
3
1
Aggregate: Roller
...
Subfamily:
Upper grinding device
Tipologia:
Calibration Solid wood sanding and finishing
Max. processable width:
1600 mm
Min. processable starch:
3 mm
Max. processable starch:
160 mm
Working level:
yes
Height:
fixed for processing in line
Yspzd8
Drift carpet:
yes
with adjustm...
3
100 $
Starting bid not including VAT
One more day
One more day
Modern Machine Tool Company, cut off tubing machine, model 2LD, with Allen Bradley Communication display, has dry type transformer, .500 KVA, primary voltage of 24480, secondary of 12240, also includes (1) Modern Machine Tool Company, model 2LD, bar stock feeder table, approx. 30' length x 80" width, unit comes with manual, single spindle lathe type, S/N 2LD2341, in working condition, winning bidder responsible for proper removal and disconnect of unit.
Ewcanhp
Online Auction: Wednesday, Januar...
Duberring machine for small tubes
Dwmd3kzw0
Ingersoll Hansen Center 300 EDM CNC Erodiermaschine
Hersteller [manufacturer]: Ingersoll Hansen
Typ [ type]: Center 300
Steuerung [control unit]: MultiPulse Control
Baujahr[construction year]: 1997
+ Inkl. Handheld
+ Inkl. EROWA Preset Comfort 3D-22 / Robot X system EDM dynamic tooling system (optional)
+ Inkl. EROWA 3-D Koordinatenmesssysem (optional)
Vollständige Dokumentation ist vorhanden.
Besichtigung unter Strom kann kurzfristig erfolgen.
Für weitere Fragen stehen wir Ihnen gerne zur...
Length of the cut - 3000 mm
Width of the cut - 1900 mm and 2950 mm
Fence 750 mm
Auto cut set for cutting backward and forward
One sided blade
Double sided blade
Zthyl0f7
Cut thickness 1mm - 850mm
Speed control for rotation of blade
Variable speed control for cutting the length
Blade Size: 9745.20.0.5.18TPI
Modular drilling and milling machine GOMAD Automatic Drilling Machine AWL 2G-6B-2C
Automatic drilling machine AWL 2G-6B-2C
Automatic Drilling Machine, Modular Drilling Machine GOMAD AWL 2G-6B-2C
Type / Model: AWL 2G-6B-2C
Production Year: 2008
Technical condition: Good
Technical description:
The AWL-2G-6B-2C drilling machine is designed to make holes for pegs and handles in wooden strips, chipboards or wood-like material. It has 2 upper, 6 side and 2 front units, a material feeder and a system ...
OMRON CPM1A control, 4 stations.
Target machine for assembling and compressing door glass modules.
Price is a net target price, a matter of final price agreement
Purchase, acquisition, asset management of industrial equipment and machinery.
Wide range of used machinery, industrial equipment
Gc9xq2pzc
Eyeletting machine for advertising banners
The device is in perfect condition, ready for work.
Technical data:
Pu3owi
1 head
laser indicator
Foot pedal operated
Machine for peeling onions
Technical parameters:
- manufacturer: GOLDEN MACHINE
- machine type: 2-row
Bkvxbvftpd
- capacity: approx. 0.4 - 0.6 tons / h
- year of production: 2018
Condition: used, operational
Machine location: 33-340 Stary Sącz, Poland
Main axis diameter 110 mm
Booim72koh
Cone ISO Nº50
Main axis axia stroke 800 mm
Maximum height of the center main axis above table 1800 mm
Minimum height of the center main axis above table 0 mm
Maximum boring diameter 600mm
21main shaft speeds (motor a 1440 rpm) 7 a 1000 rpm
Table Cross travel 2000mm
Longitudinal travel of the table with steady 2000mm
Longitudinal travel of the table without steady 2400 mm
Useful Surface of the rotary table 1260x1530 mm
Max. distance between main axis and s...
Bed size 880 x 630 mm
Outer edge seal 950 x 700
Ojdgl
Inside edge seal 880 x 630
Double heater
6 heat settings for the top heater
1 setting for the bottom heater
Vacuum pump included
Vacuum tanks included
Top air ramp for blowing domes
MILLING MACHINE FOR ALUMINIUM pillars RINALDI LILIPUT 9M FS
Lnsin
Manual or NC downfeed control
Working area X/Y/Z 300/600/500 mm, grinding wheel Ø 355 mm,
motor 3,7 KW, speed 1750 rpm., dimension 3100x1900x2200 mm,
weight ca. 2200 kg, digital read out, compl. hausing, 4 wheel flanges,
instruction manual, Installation pads; run only with oil.
G0szoun
with magnetic chuck + coolant system
3-head riveting machine for files
Opxw9
Perfect condition, practically unused.
Production Germany.
Operation via the control panel, cycle counter.
The machine is used for crimping all kinds of ring mechanisms, clips, etc.
Three riveting heads, with adjustable spacing and the possibility of activating each head separately from the control panel.
Cardboard thickness 0.5-4mm
Spacing of heads: 45-365mm
Weight 500 kg
380V power supply
Calibration sleeve for the production of KG-U PVC PIPE (sewer pipe)
Pipe diameter: 200x4,9 mm
Fxz0pzbqe
Condition: very good
ITALPACK packing machine with its accessories
MASPACK/TOSA end line wrapping system with its accessories.
The machine is as good as new as it worked for only 3 months.
Puwpvy
Max. cutting force 30 tonnes
Cutting head 400 x 500 mm
Bed size 2300 x 510 mm
Stroke length (adjustable) 10 - 120 mm
Belt width 1800 mm
Operating height 990 mm
Pump motor capacity 1.1 kW 1.5HP
Approx.weight 3560 Kg
Traverse and feed drives closed loop, D.C. servo motors
Feed System “Ping and grab” clamp feed - two fixed,
one travelling clamp
Nylon belt cutting and feeding system
Intermediate cutting board and board
shi...
Automatic single head saw METEOR I 600 (400V power supply)
disc Ø 600 mm, cooling system + conveyor K-3000 right in standard
APPLICATION:
For cutting aluminium, plastics and wood profiles
FUNCTIONS:
- Hydropneumatic cutting
- Safe cuts with automatic safety cover
- 0°, 15°, 22.5°, 30°, 45°, 67.5° right and left fixed angles
- Can be cut in any intermediate angle between
- 67.5 ° to + 67.5 °
- Speed control
- Horizontal (2pcs) and vertical (2pcs) pneumatic clamps
STANDARD EQUIPMENT:
Mvnuv0
- S...
DMG Vertical Machine Center
DMC 835V
Year 2008
Travel X835 Y510 Z 510mm
Bexr77si
Spindle 10,000rpm
ATC 20 magazine
Heidenhain iTNC-530 3D DMG ERGOLine – Control
Bt40 Spindle Taper
Coolant – Air Blast Changeover by M-Code
Spray Gun for swarf Removal
Electronic Hand-wheel
Active Chiller for Spindle
Roller mill W12-25x3000, 4 - roller, with NC control - reading on all axes, desktop control, colour touch screen; year of manufacture 2015, power 45kW, weight -22 tons
bent plate thickness 25mm
Hbub7zxc
width of bent plate 3000mm
the machine has worked very little and has not been used for 2 years
Europa VS660 Gap Bed Centre Lathe with 660mm swing x 1500mm between centres. Equipped with Fagor 2 Axis DRO, 3 jaw chuck. Quick change toolpost and toolholders. Large capacity, heavy duty lathe
Specification
Europa VS660
Centre height 330mm
Distance between centres 1500mm
Swing over bed 660mm
Swing over cross slide 430mm
Spindle bore (max. bar dia) 104mm
Pui0yq
Spindle nose mounting D1-11 Camlock
Taper in spindle bore No. 7 Morse
Swing in gap 860mm
Width of bedways 480mm
Total travel of cross sl...
FOD Milling and copling machine. DFPA 40 horizontal profile milling machine
Manufacturer FOD
Model / type of machine. Horizontal profile milling machine DFPA 40
Year of production 1989
Category of machines. Milling and copier
Location
Gorzów Wlkp.
Conditions of delivery
own collection
Cost of delivery
Customer cover
Start type
to be agreed
Description
Comments
Njhux
Destiny:
The DFPA 40 horizontal milling machine is a universal machine tool with a wide range of applications in the furnitur...
Single head saw for steel, metal, (blade Ø 315x2.5x32 mm)
APPLICATION:
For cutting metal profiles
FUNCTIONS:
- Robust spring system, safe cutting
- Cuts to any angle between 45° and 90°
Dgyu3yas3
- Hand clamps
- Possibility to prevent the blade from heating up and remove swarf by cutting with coolant
The price given is the net price.
12-month warranty
EXW. Obodovo, Sośno, Poland
The price offer presented is for informational purposes and does not constitute a commercial offer within the meaning ...
FERMAT machine tool, s.r.o., Prague / Czech Republic
Universal cylindrical grinding machines BHC 63 CNC with cast iron bed * max loop length of 6,000 mm * swing up to 1,000 mm * workpiece weights up to 5,000 kg (with Bezel)-general product description
Machine base made of cast iron
Machines are with control Siemens 840 d sl (828 D sl) or B + R delivered power Panel 900.
Remote Diagnostics free to current warranty and beyond!
CNC Schleifscheibe Abrichtung
Reference visits throughout Germany poss...
Radial drill press in good condition.
With motorized boom (Up / Down)
Morse taper 4
Travel on the boom: 725 mm.
Travel on spindle: 270 mm.
32 - 2500 rpm.
0.06 - 0.8 mm / rpm feed rate.
Spindle diameter: Ø65 mm.
Max height between table and spindle: 995 mm.
Total dimensions: 180 x 85 cm.
Bnxo2cb
Height: 248 cm. (Transport height: 228 cm)
SEMIAUTOMATIC BOOK COVER POSITION MACHINE
Bhhx2keocu
LJ308A
-new machine
Table surface 1000 x 280 mm; x- approx 500 mm; y- approx 240 mm; z- approx 500 mm;
G7bfuc3nu
feeds and rapid traverse on X and Y; n vertical head= 90-2000 1/min; ISO 40 holder; quill travel 120 mm; motor 400 Volt; 2,2 KW; weight= approx. 1150 kg.
Upper beam horizontally adjustable and rotatable; vertical head swivels, 2 sides
Chip protection and safety cover, halogen lamp, central lubrication; chip tray;
Combination milling cutter holders; Drill chuck holders; Cutter head with holder; Clamping
G...
milling machine for arches
Wucxmcy3c
swiveling milling spindle machine
It has for the transport of feed is used for milling
arc elements
Special machines
Sweeper applied 414 RS Nr. 6, year 2011, B-92597, 1427 hours, 2 cylinder diesel Kubota Z483E, 9 kw, 6 km/h, sweeping width up to 1140 mm, first and reverse, Push broom and brush plate is missing, scratched Panel and eigerissen, marker lamps broken,. Suction mouth flap is missing, missing sprinkler pump
Nclud
FERMAT Machine Tool, s.r.o., Praha / Czech Republic
FERMAT HORIZONTAL TABLE DRILLING AND MILLING PLANT - WRFT 130/150/160 CNC *** X: 2.400 mm to 9.500 mm *** Y: 2000 to 6.000 mm and spindle diameter up to 160 mm
The horizontal bench-type boring and milling machine WRFT 130/150/160 CNC offers a new, conceptual machine solution among the large bench-type boring mills with an efficient and powerful headstock. This in turn consists of an extendable stick (travel V) and an extendable spindle (travel ...
Complete automatic system for the production of conical buckets, Hobbocks, 10/15/20/25 l
Noyit
Diameter bucket top 285 mm
Diameter bucket bottom 272 mm
Production capacity approx. 50 pieces/min
The plant has been completely overhauled, is in a very good operational condition and is still in production!!!
If necessary, a complete assembly and commissioning can be offered to the buyer!!!
Can be used for filling oil and varnish.
Cueopz3k
LEOplus
LEOplus automatic cutting centre 550 mm disc with automatic profile feed robot
APPLICATION:
Used for cutting aluminium, PVC and wood profiles
FUNCTIONS:
⦁ fully automatic operating system
⦁ hydropneumatic cutting
⦁ Automatic positioning. All steps between
-22.5° to +45° with an accuracy of +-0.1 degree
⦁ Industrial PC with Windows, 10" touch screen and easy, practical interface
⦁ Precision slicing function
⦁ Big memory
⦁ Adjustable disc stroke speed
⦁ Automatic cutting with previous
...
Modular drilling machine GOMAD WU 2 C 2 G 2 T 2020 new machine
Location
Gorzów Wlkp.
Conditions of delivery
OWN COLLECTION
Cost of delivery
Cqu2egkl3
Customer cover
Startup Type
to be agreed
Description
Comments
Double-sided WU multi-spindle drills are designed for making holes for dowels in wood, chipboard and wood-based materials.
The WU drill has three drilling units - two vertical and one horizontal side, which allows drilling three rows of holes simultaneously.
WU
Number of drilling...
Sweeper applied 414 RS Nr. 5, year 2011, B-92594, 3019 operating hours, 2 cylinder diesel Kubota Z483E, 9 kw, 6 km/h, sweeping width mm 1140, forward and reverse, covering scratched and eigerissen, marker lamps broken broom arm bent down
Bbxodmlric
FERMAT Machine Tool, s.r.o., Praha / Czech Republic
HORIZONTAL PANEL BORING AND MILLING MACHINE - WRF 130/150/160 CNC
to X: 30,000 mm *** Y: 6,000 mm and spindle diameter up to 160 mm
The horizontal CNC boring and milling machine WRF 130/150/160 represents new structural concepts of horizontal panel boring mills on the market. The powerful headstock consists of an extendable stick (travel V) and an extendable spindle (travel W). The WRF boring mills make it possible to achieve extremely high eff...
The single-column turning-boring lathe model 1512 is a universal machine designed for processing a variety of products from ferrous and non-ferrous metals in conditions of small-scale and serial production.
Blyojp8jl0
Model 1512 is the most widespread among boring lathes in the territory of the former USSR. The machine allows turning parts up to 1250 mm in diameter, up to 1 meter in height and up to 3200 kg in weight. The machine has been exported to many countries around the world.
The followi...