Used Cable Recycling for sale (5,664)

Condition: new, Year of construction: 2025, functionality: fully functional, RSS HD 4 Shaft Shredders in any size, Fodpfoh N Dmnjx Ag Dspd Adjustments to e.g. knives, motors, sieve, frame possible. Supply and discharge belts, storage, metal separation possible. Larger or smaller models also available. optional fast hydraulical screen cleaning or changesystem for advise or information do not wait, contact us. Delivery in consultation.

Condition: reconditioned (used), Year of construction: 2018, functionality: fully functional, overall weight: 720 kg, total length: 320 mm, cutting length (max.): 300 mm, Alligator shears JMC 320 Fully overhauled, as new IMMEDIATELY available from stock IUT Beyeler AG, DE-06188 Landsberg. Financing and rental possible. We are looking for used alligator clippers! 12-month warranty The well established 320 Shear is a must for any yard and is now recognised as the industry standard for all shears of this type. One of our most popular shears, the McIntyre 320 Shear has maintained dominance in a demanding market due to its strength, quality and reliability The 320 is powerful enough to deal with a wide range of cutting and cleaning operations and is Fpedpfx Ajfxvkljg Dod able to handle; automotive scrap, whole gear boxes, cylinder heads and blocks, oversized gate valves and of course all the usual non ferrous metal separations. The 320 can also be used to cut ferrous metals. Every shear comes with 1 year guarantee, spare parts can be delivered within 24 hours to whole europe.

Condition: used, Year of construction: 2008, functionality: fully functional, overall weight: 1,143 kg, operating pressure: 3,500 bar, We are offering this used JMC Recycling 500 SHEAR alligator shear, year of manufacture 2008. Manufacturer: JMC Recycling Systems Ltd Model: 500 SHEAR Fpodpfoyk Itlex Ag Ded Serial Number: 121 Year of Manufacture: 2008 Rated Voltage: 380–415 V Frequency: 50 Hz Maximum Operating Pressure: 3500 Total Weight: 1143 kg Recommended Hydraulic Oil: HYD ISO 46 Oil needs to be replaced with new. Fully functional. If you have any questions or require further information, feel free to send us a message or call us.

Condition: new, Year of construction: 2026, The system can be loaded onto a truck with a forklift and is ready for operation in just a few simple steps. A 16A socket is required. Total dimensions of the system LxWxH 3.5 x 1.06 x 2.98m (ready for operation) Precondition for the separation are differences Fpodefrugkspfx Ag Djd in the material like: - Different sizes of particles - Differences of the density - Differences in the surface condition of the particle - Differences in the form of the particle - Grain size 0.1mm-30mm, (bigger particles are possible with a special design)

Condition: new, Year of construction: 2024, functionality: fully functional, COMPLETE PLASTIC GRANULATION LINES We offer technologically advanced complete plastic granulation lines designed to meet customer needs. Koltex PRS is a Polish manufacturer of high quality machinery and equipment for the various stages of waste recycling: PP,PE,LDPE,LLDPE,PS,ABS,HDPE. We provide comprehensive solutions and support for machine configuration. The innovative technologies of our recycling systems guarantee the highest degree of user-friendliness and equipment efficiency. We offer all the machines needed to configure a complete plastic recycling line. The XR 8 granulation line is the latest model from Koltex Plastic Recycling Systems in the field of LDPE film processing. In addition to the well-known technological solutions used in standard extruders, a number of changes have been made to achieve high production rates while improving the quality of the regranulate achieved. The new system is characterized by low energy consumption and significantly simplified operation thanks to the new SMART software. Numerous modifications have reduced the machine footprint by 30% compared to the previous model, but also increased productivity by 45% while reducing energy requirements by around 15%. An intelligent temperature control system for the plastic in the Agglomerator and an automatic material dosing system ensure process stability. Thanks to the automation of the process, operator involvement has been reduced to a minimum. Fpjdpfjuqmavsx Ag Dod Our offer also includes: Complete systems for plastics recycling Mills Plastification systems, vibrating screens, centrifuges Screen changers Peripheral equipment Washing lines (DWFS®) Dynamic washing machines Drying separators Granulation and extrusion lines Service and spare parts You can find out more about our range of products in this area at our website

Year of construction: 2025, condition: new, The Zig-Zag Air Separator by Koltex Plastic Recycling Systems enables efficient separation of bulk materials into fractions with different densities. The material to be separated is fed into the device via a rotary valve, ensuring even distribution across the entire cross-section of the separation channel. Sorting is carried out using an upward airflow generated by a high-performance blower. The air flows through the separator channel, lifting lighter particles while heavier fractions fall downward due to gravity. The specially designed Zig-Zag channel forces the material to pass through the airflow multiple times at each turn. Lighter fractions are effectively lifted and discharged through the top airflow, while heavier particles remain and fall, ensuring precise and efficient separation. Fjdpfevmxvfex Ag Dopd The separator is equipped with advanced dust extraction cyclones with filters that eliminate dust emissions throughout the process. This ensures not only high separation efficiency but also environmental safety and workplace cleanliness. Koltex Plastic Recycling Systems also offers high-quality shredders, which can be integrated at the start of the process to create a complete grinding line with the separator. This solution enables comprehensive material processing, from shredding to precise separation, providing full control over the recycling process.

Condition: new, Year of construction: 2025, Turbo mill MTR-800 The turbo mill is designed for grinding, knocking out, granulating of materials in order to improve the quality of final separation in further recycling processes. Technical date: - Installed power –75kW - Chamber width – approx. 910mm - Chamber diameter – approx. 620mm - Number of abrasive knives – approx. 89 pcs. Fsdpfx Ajv I S Ukeg Djpd - Number of abrasive counterknives – 18 pcs. - Structure placed on adjustable vibration isolators - Dimensions – 2200 x 1600 x 1550mm - Chamber opening by means of a manual hydraulic pump - Engine base with a rocker tensioner - Weight – approx. 1950kg- -Discharge ended with an orifice fi-150 -Electrical installation with inverter included in the price.

Condition: new, Year of construction: 2026, Ballshaping- and Delaminationmill Molinator for fine delamination! Diverse Types: RW VKR16/3 / 22-37kW and RW VKR 22/3 / 75-110kW Input Composite Material Examples: Regrind from hair-wire, printed circuit boards, electronic circuits, other composited material. Al / Plastic, Cu / Plastic, Cu / Glass fibre, ABS / Plastic fibres, etc. Type selection: depending on the material / depending on layer thickness / depending on test‘s / according to the desired throughput. Description Molinator: Fjdpfx Ajdwqiueg Dopd In the inner acts very high forces (High acceleration / high relative-speed)! Bigger parts will be delaminated. Composite-material separates at the phase of boundaries. Metals will be ballshaped. Plastics depending on the specifications stays “fluffy” or will be grinded. These effects besides the desired delamination, are helpfully for the separation and are exactly coordinated to our separation-technology like Fluid Bed Separators / Sievemachines / Sifters.

Year of construction: 2026, condition: new, Circle Sievemachine to sieve dry material: like flour-, grainy-, and granule-shaped material. Fedjbcngispfx Ag Depd Sizes from: wide 500-1500mm / length 1200-2400mm Sieve layers: 2 - 4 ply, granlulation < 18mm freely selectable.

Year of construction: 2026, condition: new, Zig Zag Air Sifter Sizes/ wides from 200mm - 1800mm Precondition for the separation are differences in the material like: Fjdschb Ruepfx Ag Djpd - Different sizes of particles - Differences of the density - Differences in the surface condition of the particle - Differences in the form of the particle - Grain size 0.1mm - 40mm, (bigger particles are possible with a special design) We are the manufacturers of these plants and we build Zig Zag Sifter Plants in different sizes see attachment. In order to make you a definite offer we need to know some points: 1. What material you want to separate? 2. Grain-size of the material? 3. Bulk weight kg/liter of your material. 4. We have technical center at our house, where we can test your material.

Year of construction: 2026, condition: new, Circle Sievemachine to sieve dry material: like flour-, grainy-, and granule-shaped material. Fodpjbcnatsfx Ag Dopd Sizes from: wide 500-1500mm / length 1200-2400mm Sieve layers: 2 - 4 ply, granlulation 0,1-18mm freely. selectable.

Year of construction: 2026, condition: new, To sieve dry material: like flour-, grainy-, and granule-shaped material. Sizes from: wide 500-1500mm / length 1200-2400mm Fsdpfx Agjchb Ryj Dopd Sieve layers: 2 - 4 layers, granulation 0,1-18mm freely selectable.

Condition: new, Year of construction: 2026, To separate and sort after the specific weight from light and heavy fraction. Useable for grain, nuts, etc. see PDF. Fpsdpfx Ajbbr Iijg Djd Type and size are selectable, depending on the product and throughput. At constant machine length, it is possible to choose between working width from: 450mm, 600mm, 900mm.

Year of construction: 2026, condition: new, To separate and sort after the specific weight from light and heavy fraction. Useable for grain, aluminium/plastic, rubber/textile, cable-recycling, etc. Type and size are selectable, depending on the product and throughput. At constant machine length, it is possible to choose between working width from: Fjdpjbbr Ipofx Ag Djpd 450mm, 600mm, 900mm.

Condition: good (used), Year of construction: 2010, Item: Disintegration mill Type: Tyre shredder Fpsdpfxjx U Dvle Ag Dod Input material: Car tyres, sports flooring Required particle size: Pre-shredded to max. hand size / < 100 mm see PDF

Condition: excellent (used), Year of construction: 2010, operating hours: 2,125 h, functionality: fully functional, MG Recycling – Copper Cable Granulation Line Manufacturer: MG Recycling Model: Matrix 400 Complete Cable Granulation Line Condition: Excellent – Fully operational Availability: Immediate Technical Description: Cable granulation line including: • Fully rebuilt pre-shredder (recent overhaul) o All rotor bearings replaced o Gearbox bearings replaced • Conveyor with magnetic rollers for scrap separation Fedpfjx It N Usx Ag Depd • Dosing hopper • Feed conveyor • Blade mill with 3 / 4 / 5 mm calibration screens • Separation by cyclone and zig-zag separator • Finishing turbo • Densimetric table • Dust extraction with bag filter Spare parts included: • Pre-shredder: 1 set of knives + counter-knives • Blade mill: 3 sets of blades and counter-blades Capacity: ≈ 200 kg/h finished product Application: Copper cable processing and recycling Price: €120,000 (complete processing line) Additional information: • Installation can be seen in operation • Photos and further details available on request 📩 Contact us for more information

Year of construction: 2026, condition: new, To separate and sort after the specific weight from light and heavy fraction. Useable for grain, aluminium/plastic, rubber/textile, cable-recycling, etc. Type and size are selectable, depending on the product and throughput. At constant machine length, it is possible to choose between working width from: Fpsdpfxochb Sbj Ag Djd 450mm, 600mm, 900mm.

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, input current: 238 A, overall weight: 36,000 kg, oil tank capacity: 1,300 l, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Fsdpfxevf E Avo Ag Djpd Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Year of construction: 2026, condition: new, Description: The FR8 flotation tank is designed for density-based separation of plastics in recycling washing lines. The machine separates floating materials from sinking contaminants, improving material purity before further washing, drying, or granulation processes. Suitable for continuous industrial operation 24/7. Materials: PE, PP, HDPE, LDPE, plastic flakes, films Fpodpfxsyh Hx Ee Ag Dsd Features: Effective density separation (float/sink process) Heavy-duty industrial construction Continuous operation for recycling lines Easy cleaning and service access Ready for integration with pre-washers, friction washers, and dryers 📩 Available in customized configurations. Contact us for details.

Year of construction: 2026, condition: new, functionality: fully functional, The PR8 pre-washer is designed for intensive pre-washing of plastic waste in recycling lines. The machine removes sand, soil, and mechanical contaminants, preparing material for further washing stages. Suitable for continuous 24/7 industrial operation. Materials: PE, PP, HDPE, LDPE, plastic films, post-production waste Technical data: Capacity: up to 2000 kg/h Drive power: 30 kW Rotor length: 3000 mm Rotor diameter: 680 mm Dimensions (L x W x H): 3689 x 1766 x 3294 mm Inlet opening: 500 x 450 mm Features: Heavy-duty industrial construction Replaceable wear parts Fodpfx Ajyh Hr Eeg Djpd Easy service access Ready for integration into complete washing or recycling lines 📩 Available in customized configurations. Contact us for details.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 25 h, functionality: fully functional, Equipment: rotational speed infinitely variable, Crusher Equipment Including: Special tools, reinforced, 7/7 tool carriers with 4 tools each (tools consist of main, pre-crushing, and post-crushing blades) Shaft speed individually and infinitely adjustable, approx. 0–41 rpm Including post-crushing bar Including tilting skip Drive Unit Drive power: 294 kW Including Scania diesel engine, Stage 5 Including standard noise reduction package Including Power RAM pre-cleaner Including central lubrication for the 4 main bearings Including Cleanfix Including swiveling cooler Electrics / Controls Including IFM display Including radio remote control Including four shredding programs (wood, waste, special, and green waste) Discharge Conveyor Including discharge conveyor Custom Equipment Including preliminary armoring of tools Including overband magnet, hydraulically height adjustable – neodymium – Including hopper extension on 3 sides, approx. 800 mm each Including electric pump for hydraulic oil Including GPS module Including rubber tracks Including pressure sensors Including additional noise-reducing cassette (-10 dB(A)) Fpodsu Hgllepfx Ag Dod Refurbishment / Service Refurbishment and service by HAAS

Condition: new, Year of construction: 2026, overall weight: 850 kg, rotor diameter: 240 mm, number of blades: 57, total length: 1,400 mm, total height: 1,200 mm, total width: 900 mm, rotor length: 430 mm, power: 17 kW (23.11 HP), warranty duration: 12 months, blade width: 10 mm, MIZAR SSH Series | High-Performance Single Shaft Shredders Controlled Size Reduction with Intelligent Feeding System The MIZAR SSH Series is engineered for efficient and controlled shredding of a wide range of materials including cables, textiles, plastics, tires, electronic scrap and various metal types. Designed for reliability, flexibility and consistent output size, SSH shredders are ideal for recycling facilities requiring uniform material preparation before granulation or further processing. SMART SHREDDING TECHNOLOGY Single Rotor – Maximum Control Customized high-alloy blades mounted on a robust single shaft ensure aggressive intake and efficient size reduction across mixed material streams. Programmable Hydraulic Pusher An intelligent hydraulic feeding system continuously pushes material toward the rotor, optimizing throughput and preventing idle rotation. Automatic Anti-Jam System In case of overload or blockage, the rotor automatically reverses direction. This protects the machine and ensures uninterrupted operation. Screen-Controlled Output Size A heavy-duty screen located beneath the rotor determines final particle size. Material remains inside the chamber until it reaches the required dimensions, ensuring homogeneous output. APPLICATION AREAS Cable Recycling Fpjdpfxswm Iw Rs Ag Dsd Copper and aluminum cables, wiring harnesses. Textile Waste Industrial textile scrap and fabric waste. Plastic Materials HDPE, PET, film, lumps, injection waste. Tires Car and light truck tires (pre-cut). Electronic Scrap PCBs, electronic components, mixed WEEE. Metals Aluminum scrap, radiators, light metal fractions. INDUSTRIAL-GRADE COMPONENTS Premium brands such as Siemens motors, SKF/FAG bearings, and Schneider or ABB electrical components ensure durability and long service intervals. All models are fully CE-certified. MODEL RANGE SSH S1 Compact solution for medium-scale operations. SSH M1 Balanced performance for diverse recycling needs. SSH L1 High-capacity industrial model. SSH XL1 Heavy-duty configuration for demanding throughput requirements. Why SSH Series? • Precise output size control • Stable feeding system • Reduced downtime with automatic reverse function • Low maintenance design • Easy integration into complete recycling lines Need a tailored shredding solution? Contact us for a customized offer or send your material for a performance test. Mizar Recycling Machinery

Condition: new, Year of construction: 2026, overall weight: 4,750 kg, rotor diameter: 350 mm, number of blades: 62, total length: 1,850 mm, total height: 2,170 mm, rotor length: 920 mm, power: 50 kW (67.98 HP), warranty duration: 12 months, blade width: 50 mm, MIZAR SSH Series | High-Performance Single Shaft Shredders Controlled Size Reduction with Intelligent Feeding System The MIZAR SSH Series is engineered for efficient and controlled shredding of a wide range of materials including cables, textiles, plastics, tires, electronic scrap and various metal types. Designed for reliability, flexibility and consistent output size, SSH shredders are ideal for recycling facilities requiring uniform material preparation before granulation or further processing. SMART SHREDDING TECHNOLOGY Single Rotor – Maximum Control Customized high-alloy blades mounted on a robust single shaft ensure aggressive intake and efficient size reduction across mixed material streams. Programmable Hydraulic Pusher An intelligent hydraulic feeding system continuously pushes material toward the rotor, optimizing throughput and preventing idle rotation. Automatic Anti-Jam System In case of overload or blockage, the rotor automatically reverses direction. This protects the machine and ensures uninterrupted operation. Screen-Controlled Output Size A heavy-duty screen located beneath the rotor determines final particle size. Material remains inside the chamber until it reaches the required dimensions, ensuring homogeneous output. APPLICATION AREAS Cable Recycling Copper and aluminum cables, wiring harnesses. Textile Waste Industrial textile scrap and fabric waste. Plastic Materials HDPE, PET, film, lumps, injection waste. Tires Car and light truck tires (pre-cut). Electronic Scrap PCBs, electronic components, mixed WEEE. Metals Aluminum scrap, radiators, light metal fractions. INDUSTRIAL-GRADE COMPONENTS Premium brands such as Siemens motors, SKF/FAG bearings, and Schneider or ABB electrical components ensure durability and long service intervals. All models are fully CE-certified. MODEL RANGE SSH S1 Compact solution for medium-scale operations. SSH M1 Balanced performance for diverse recycling needs. SSH L1 High-capacity industrial model. SSH XL1 Heavy-duty configuration for demanding throughput requirements. Why SSH Series? Fpjdpfxsg Dcq Ts Ag Dsd • Precise output size control • Stable feeding system • Reduced downtime with automatic reverse function • Low maintenance design • Easy integration into complete recycling lines Need a tailored shredding solution? Contact us for a customized offer or send your material for a performance test. Mizar Recycling Machinery

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 3,860 mm, total width: 1,200 mm, total height: 3,000 mm, overall weight: 5,500 kg, warranty duration: 12 months, blade width: 75 mm, power: 60 kW (81.58 HP), rotor length: 770 mm, High-Torque Performance for Demanding Industrial Applications Engineered for continuous operation, the MIZAR DSH Series delivers powerful, low-speed, high-torque shredding performance for the toughest materials. Designed for reliability, built for industrial scale. CORE ADVANTAGES Drive System Independent dual shafts powered by heavy-duty planetary gearboxes. High torque at low RPM ensures efficient size reduction with minimized wear. Industrial-Grade Components Siemens motors, SKF/FAG bearings, Schneider or ABB electrical systems. Globally trusted brands for long-term reliability. Blade Technology Custom-engineered, high-alloy wear-resistant steel blades. Optimized cutting geometry for aggressive intake and consistent output size. Structural Strength Reinforced steel frame construction for vibration resistance and extended service life. Fully CE-certified for international compliance. APPLICATION FIELDS Scrap Metal Aluminum profiles, radiators, light scrap, sheet metal. E-Waste PCBs, motherboards, hard drives, mixed WEEE materials. Cable Recycling Copper and aluminum cables, wiring harnesses. Plastic Waste Fedjgwhb Ispfx Ag Depd HDPE pipes, industrial drums, PET, big bags. Wood Waste Pallets, timber, MDF production waste. Alternative Fuels Pre-shredding for RDF and SRF production lines. MODEL RANGE DSH S1 Compact footprint. Ideal for medium-capacity operations. DSH M1 High-performance all-round solution for diverse material streams. DSH L1 Heavy-duty industrial powerhouse for large-scale recycling plants. Why Mizar DSH? • High torque without high energy consumption • Modular design for integration into complete recycling lines • Easy maintenance access • Built for 24/7 industrial environments Need a tailored shredding solution? Contact us for a customized quotation or send your material for a performance test. Mizar Recycling Machinery

Year of construction: 2025, condition: new, To separate and sort after the specific weight from light and heavy fraction. Useable for grain, aluminium/plastic, rubber/textile, cable-recycling, etc. Type and size are selectable, depending on the product and throughput. At constant machine length, it is possible to choose between working width from: Fsdpe Snd Nefx Ag Djpd 450mm, 600mm, 900mm.