Used Cable Recycling for sale (5,940)

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Nedpfx Aszp H R Ejhfolf Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Condition: refurbished (used), Year of construction: 2011, machine/vehicle number: R-00655, load capacity: 125 kg, arm reach: 3,005 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC R-2000iB/125L manufactured in 2011.11. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: R-2000iB/125L Model Number: A05B-1329-B261 Year of Manufacture Robot: 2011.11 Warranty term (months): 12   Payload (kg): 125 Reach (mm): 3005 Repeatability (mm): ± 0.2 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1190   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2011.10 RCC Length (m): 7 Njdpfszqt Nksx Ahfelf   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10    

Condition: used, mileage: 287,000 km, power: 355 kW (482.67 HP), first registration: 09/2022, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2022, Equipment: ABS, air conditioning, compressor, electronic stability program (ESP), parking heater, DAF XF480 AT-Boretec HS2, approx. 1,900 operating hours, well-maintained, last service at 1,760 operating hours. The HS2 system truck is a bentonite mixing and recycling system designed for use in complex drilling projects. With its 45 kVA generator, the HS2 provides a powerful and reliable solution. The system is equipped with ten cyclones and three centrifugal pumps, each rated at 7.5 kW, ensuring efficient processing and transfer of drilling fluids. The shaker features three dual-deck flatscreens with six screens in total, allowing for thorough screening and cleaning. The total tank capacity is 12,000 liters, divided into three tanks, providing ample capacity for drilling fluids. Additionally, the HS2 includes a 1,100-liter fresh water tank. The HS2 system truck is integrated in a BDF container construction, offering maximum flexibility and mobility for operations at various sites. It also comes with a tank capacity increased by 4,000 liters, resulting in a total of 12,000 liters. Construction Description: SYSTEMTRUCK HS2 The most proven all-rounder with a total tank volume of 12m³ (5 + 5 + 2), sold over 200 times since 2015 and continuously improved for ongoing successful operation. Optimally designed for drilling rigs in the 15–25 t performance class. The three KSB centrifugal pumps, each with a flow rate of 1,100 l/min (7.5 kW), are powered by an underfloor-installed 50 kVA generator. Max. cleaning performance of up to 150 m³/day or 15 m³/h Centrifuge option: For drilling rigs with small, high-pressure bentonite quick-runner pumps to significantly increase service life; 10 hydrocyclones to separate fine solids: 2.2 bar. Mixing and recycling system in an ISO container frame Also usable as a full-fledged permanent mixing plant with 2 × 5 m³ working tanks. Empty weight, depending on chassis and due to high-quality lightweight construction, is approx. 17 t Mounted on a 3-axle, 26 t chassis Nlsdpezq Hb Hjfx Ahfjf 3 dual-deck flatscreen shakers with 6 screens for removal of coarse solids 1,100 l fresh water tank capacity TECHNICAL DATA: SYSTEMTRUCK HS2 CARRIER VEHICLE: Permissible gross vehicle weight: 26 t BDF CONTAINER L x W x H (mm): 7,450 x 2,550 x 2,950 Total weight (incl. truck): 17,000 kg TANK SYSTEM: Total tank volume: 12,000 l Tank 1: 5,000 l Tank 2: 5,000 l Tank 3: 2,000 l Fresh water tank volume: 1,100 l RECYCLING SYSTEM Shaker: 3 dual-deck flatscreen units Total number of screens: 6 Shaker inclination adjustment: manual (hydraulic) Number of hydrocyclones: 10 (4?) Number of centrifugal pumps: 3 Centrifugal pump rating: 7.5 kW Centrifuge: 1 Number of agitators: 3 Agitator power (Tank 1): 1.5 kW Agitator power (Tank 2): 1.5 kW Agitator power (Tank 3): 0.9 kW Cleaning capacity: up to 150 m³/day GENERATOR Generator output: 50 kVA Emission standard: Stage V Installation: Underfloor AT-Boretec HS2 HS2 Bentonite Mixing and Recycling System, year of manufacture 2022 DAF truck first registration: 2019 Truck with AT-Boretec HS2 with registration as a self-propelled work machine. Bentonite mixing and recycling systems – The use of the HDD system truck provides the following advantages: * Significant savings on fresh water and bentonite * Cost savings on bentonite disposal due to recycling * Substantial reduction in drilling downtime by eliminating waiting times for water refueling, mixing, and disposal * Strong reduction in ...

Condition: excellent (used), Year of construction: 2012, Used Stadler Bunker Hopper Nedpszqvdqofx Ahfjlf Year 2012 Measures 10M Long x 2M Wide x 3M High The Sides Could Be Removed To Leave Only The Conveyor Excellent Condition Electric Motor / Gearbox Drive

Condition: good (used), Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology, -Manufacturer: H. Dreher, Side-mounted mill cutting mill -Type: S26/26 -Drive motor: 5.5 kW -Number of cutting blades: 4 pieces -Number of counter blades: 2 pieces -Sieve perforation: Ø 8 mm -Rotor width: 250 mm Nledpfx Ahszf Ng Uefsf -Rotor diameter: 260 mm -Quantity: 1 cutting mill available -Price: per piece -Dimensions: 650/1460/H1880 mm -Weight: 475 kg

Condition: used, Year of construction: 1998, machine/vehicle number: 0102-260022, The Behringer HBP 430N is a horizontal, double-column bandsaw designed for professional use in metalworking. It is suitable for precisely cutting solid materials, pipes, and profiles and impresses with its robust construction and high cutting accuracy. The machine is designed for straight cuts; depending on the configuration, miter cuts up to 45° are also possible. With a cutting range of Ø 430 mm or 600 × 430 mm and a continuously variable cutting speed of 17 to 110 m/min, it can be used in a variety of applications. The powerful 7.5 kW sawing motor, hydraulic workpiece clamping, and coolant system with 150 liters ensure reliable and economical operation. With a machine weight of 2,100 kg, the HBP 430N offers high stability and is ideal for daily use in metalworking, steel construction, and mechanical engineering companies. Nedpfx Aozq S Ncshfjlf Technical Data HBP 430 N Working range 90° round Ø 430 mm Working range 90° flat 600 × 430 mm Working range 45° flat 320 × 430 mm Smallest material dimension 15 mm / 10 × 15 mm Smallest section length 10 mm Remaining piece length approx. 40 mm Cutting speed 17–110 m/min Coolant tank 150 l Belt tension 80 bar Sawing motor 7.5 kW Hydraulic motor 2.2 kW Coolant pump 0.12 kW Chip conveyor 0.09 kW Connected load approx. 11 kW Mains connection 400 V / 50 Hz Control voltage 24 V DC Current consumption approx. 22 A Fuse 35 A Cable cross-section min. 4 × 6 mm² Saw band dimension 5,800 × 54 × 1.3 mm Machine weight 2,100 kg Material support height 700 mm

Year of construction: 2000, condition: like new (used), stock-No.1919 complete set of Nlsdpfx Ahob Aq Hpofsf extrusion-tools / calibrating parts , used but very good condition- very less operting hours, tools made in Germany ᐳ for the production of electric cable protection canals/ ducts, incl. punching unit to punch the fixing holes in the ready-made profiles

Condition: refurbished (used), Year of construction: 2021, machine/vehicle number: R-00644, load capacity: 165 kg, arm reach: 2,655 mm, controller manufacturer: R-30iB Plus A-size, teach pendant manufacturer: A05B-2256-C101#EGN, Refurbished FANUC R-2000iC/165F manufactured in 2021.12. The robot comes with an R-30iB Plus A-size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC  Model: R-2000iC/165F Model Number: A05B-1333-B201 Year of Manufacture Robot: 2021.12 Warranty term (months): 12   Payload (kg): 165 Reach (mm): 2655 Nodpfxoztm Avs Ahfolf Repeatability (mm): ± 0.05 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1090   Controller: R-30iB Plus A-size Year of Manufacture Cabinet: 2021.12 RCC Length (m): 14   Teach Pendant: A05B-2256-C101#EGN Teach Pendant Cable Length (m): 10

Condition: new, Year of construction: 2026, power: 45 kW (61.18 HP), Single-Shaft Shredder WT40100 – 45 kW – Hydraulic Pusher – NEW GrabTrade has specialized in the sale of machinery and complete technological solutions for the recycling industry for many years. We are an official representative of 3E Machinery in Poland. We offer new and used shredders, granulators, and complete recycling lines. We offer a new industrial single-shaft shredder, the 3E Machinery WT40100, equipped with a 45 kW main motor and a hydraulic pusher system. The WT series is designed for the pre-shredding of large and bulky materials that cannot be fed directly into granulators due to their size and structure. The hydraulic pusher automatically pushes the material towards the rotor, ensuring efficient and stable shredding. TECHNICAL SPECIFICATIONS: Model: WT40100 Type: Single-shaft shredder with hydraulic pusher Main motor power: 45 kW Hydraulic motor power: 2.2 kW Rotor length: 1,000 mm Rotor diameter: 390 mm Rotor speed: 74 rpm Rotor knives: 58 pcs. Fixed knives: 2/4 pcs. Standard screen perforation: 40 mm Cutting chamber: 1,410 × 1,000 mm Machine dimensions (L × W × H): 2,825 × 2,004 × 1,875 mm Discharge height: 500 mm Weight: approx. 4,000 kg Control system: Siemens components / Siemens LOGO PLC Condition: Brand new Technical parameters according to the WT series specification published by GrabTrade. APPLICATIONS: The WT40100 is suitable for shredding a wide range of materials, including: PP, PE, HDPE, and LDPE plastics, plastic lumps and purgings, PVC, plastic pipes and profiles, film waste, crates, boxes, and containers, wood and pallets, paper and cardboard, textile waste, carpets and Big-Bags, cable waste, industrial and bulky waste. The hydraulic pusher system continuously pushes the material towards the cutting rotor, providing effective processing even with bulky or irregularly shaped waste. Nljdoznbhiopfx Ahfsf The shredder is equipped with a robust low-speed rotor, an external bearing system, and overload protection. The machine can also be integrated with a granulator, conveyor, screw conveyor, or other equipment to create a complete shredding and recycling line. 3E Machinery specifically demonstrates the WT40100 operating together with a PC4280 granulator as a complete shredding system. Machine available in our offer. We provide professional technical advice, commissioning, after-sales service, and full access to spare and wear parts. Full range of our shredders, granulators, and complete recycling lines: GrabTrade – shredding and recycling machines.

Year of construction: 2005, operating hours: 4,205 h, condition: used, 2005 | Westeria WindSifter on tracks | Used Screen | 4205 hours 📍Location: Belgium Nsdpfx Asyaikkjhfjlf 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 43000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 71 inspection points 55 approved ✅ 15 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: Good, machine was in working condition at the time of inspection. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "35089 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), Brüel & Kjær LDS Dactron LASER USB LAS 200 Shaker Control System Manufacturer: Brüel & Kjær / LDS Dactron Type: LASER USB LAS 200 Machine Type: Shaker Control System / Vibration Testing Controller For sale is a used Brüel & Kjær LDS Dactron LASER USB LAS 200 Shaker Control System, including a USB license dongle and documentation. The system was developed for controlling electrodynamic vibration testing systems and is suitable for vibration tests, resonance tests, random tests, shock tests, and endurance tests in research, development, and quality assurance. Technical Data: Model: LAS 200 Type: LASER USB Power Supply: 100–240 V AC Mains Frequency: 47–63 Hz Nlodpfxszrtyle Ahfof Power Consumption: 1 A 8 analog input channels (BNC) 2 output channels (Drive / COLA) USB interface Digital I/O Master/Slave interfaces Emergency Stop connector Software Configuration: Random Sine on Random Random on Random Swept Sine Resonance Search, Track and Dwell Sine Oscillator Classical Shock Shock Response Spectrum Long Time History Enabled Options: Automatic Drive Notching / Limiting Real Time Data Exchange High Frequency Control Amplifier Controller Calibration: Calibrated: 09/12/2023 Due date according to sticker: 09/11/2024 Dimensions: Controller (W × D × H): approx. 430 × 350 × 90 mm Weight: approx. 6–8 kg Equipment: USB license dongle Power cable Documentation as shown in the pictures USB interface 8 measuring inputs Digital I/O Master/Slave interfaces Shipping Data: Dimensions: approx. 430 × 350 × 90 mm Weight: approx. 6–8 kg Condition: Used Optical condition as shown in the pictures. Calibration sticker is present. Scope of Supply: Brüel & Kjær LDS Dactron LASER USB LAS 200 Shaker Control System USB license dongle Power cable Documentation as shown in the pictures Note: The license keys visible on the documents have been obscured for data protection and security reasons. Availability: by arrangement. Scope of supply as shown in the pictures. Subject to change, errors and prior sale.

Year of construction: 2018, condition: excellent (used), Vötschtechnik ClimeEvent C/340/70/5 Climate Testing Chamber Manufacturer: Vötschtechnik GmbH Type: ClimeEvent C/340/70/5 Year of Manufacture: 2018 Machine Type: Climate Testing Chamber / Temperature Testing Chamber Test Chamber Volume: approx. 340 liters For sale is a used Vötschtechnik ClimeEvent C/340/70/5 climate testing chamber with touchscreen control. The testing chamber was developed for professional temperature and climate testing and is ideally suited for environmental simulations, material testing, quality assurance, research, as well as development and stress tests. Technical Data: Type: ClimeEvent C/340/70/5 Test Chamber Volume: approx. 340 liters Temperature Range: -70 °C to +180 °C Temperature Change Rate (Heating): approx. 7 K/min Temperature Change Rate (Cooling): approx. 7 K/min Max. Heat Compensation: approx. 3000 W Temperature Deviation (Time): ±0.1 to ±0.5 K Temperature Homogeneity (Spatial): ±0.5 to ±1 K Temperature Gradient: ≤2 K Climate Range (Temperature): +10 °C to +95 °C Dew Point Range: -3 °C to +94 °C Humidity Range: 10 to 98 % RH Humidity Deviation (Time): ±1 to ±3 % RH Temperature Deviation (Climate Mode): ±0.1 to ±0.3 K Temperature Homogeneity (Climate Mode): ±0.5 to ±1 K Refrigeration System: Refrigerant: R449A / R23 Refrigerant Quantity: 2.50 kg / 0.75 kg Electrical Data: Power Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated Power: 9 kW Rated Current: 20 A Sound Pressure Level: approx. 57 dB(A) Dimensions: External Dimensions (H × W × D): approx. 1830 × 900 × 1890 mm Internal Dimensions (H × W × D): approx. 750 × 580 × 765 mm Weight: approx. 650 kg Equipment: Touchscreen Control Stainless Steel Interior Large Viewing Window Interior Lighting Water-Cooled Version Side Cable Entry Multiple Shelf Levels Ethernet Interface USB Interface Accessories as Shown in Pictures Shipping Data: Shipping Dimensions (H × W × D): approx. 1830 × 900 × 1890 mm Shipping Weight: approx. 650 kg Condition: Used Optical condition as shown in pictures. Scope of Delivery: Vötschtechnik ClimeEvent C/340/70/5 Climate Testing Chamber Accessories as Shown in Pictures For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: • Functional check and replacement of necessary components • Refilling with legally compliant refrigerant if necessary • Leak test with certificate • Documented test run after successful inspection. Availability: upon agreement. Nsdpfx Aozrwyishfjlf Scope of delivery as pictured. Subject to change, errors and prior sale.

Condition: used, Slow-speed pre-shredder for rubber, plastic, cables, composite materials Well-suited for material composite separation, e.g. tires, scrap cables With integrated safety shear coupling for protection against foreign objects Rotor: 600 mm diameter x 1450 mm working width Enclosed rotor with staggered segment knives, mounted on cassettes 24 rotor knives, 2 stator knife rows Swiveling screen basket, perforation as required With feed device (pendulum arm) Drive power: 90–200 kW Nlsdeztm Daopfx Ahfsf

Condition: used, HERBOLD PU800 pulverizers Suitable for soft to medium-hard materials Used so far for fine grinding of plastics Diameter of grinding disks: 800 mm Drive motor: 90 kw Nljdpfxsztm A Nj Ahfjf

Year of construction: 2004, condition: reconditioned (used), Stock-No. 2054 1used, partly overhauled and functionally tested Single-screw extruder AlphaTec A-ES 75.28 Screw –Ø 75 mm- 28 LD main drive 75 kW- AC Screw speed up to 80 r.p.m. - adjustable 1x venting port with vacuum-pump cylinder barrel heating apporx. 30 kW installed Nlsdpfxjiyya Ae Ahfef 3x additional temperature controller for down-stream equipment Control board overhauled You´re welcome for inspection visit in our stock Wuppertal-Germany More extruders available

Condition: used, functionality: unexamined, machine/vehicle number: SPA-3 | RADEYE SX DB-078, Thermo Fisher SPA-3 Radiation meter set Njdpsxcufwefx Ahfjlf Thermo Scientific SPA-3 Waterproof High Sensitivity Gamma Detector for use when high sensitivity to radiation is required. Set includes: Two travel cases, SPA-3 Radiation Meter, RadEye SX DB-078 Detector, stand, cover, cable, and instruction manuals.

Condition: new, Year of construction: 2026, functionality: fully functional, rotor diameter: 480 mm, rotor length: 2,000 mm, power: 150 kW (203.94 HP), rotational speed (max.): 80 rpm, Equipment: rotational speed infinitely variable, Genox BH2000 Series - Heavy Duty Single Shaft Shredder suitable for processing various materials including plastics, wood, rubber, paper, copper cable etc. 150kW combined motor power (110kW & 180kW options also available) with heavy duty oversized gearboxes, 80rpm shaft speed as standard. 2000mm wide x 480mm diameter Rotor with 95 pcs, 40mm Concave reversible alloy steel blades. 60mm blades are also available. Hydraulic force feeding of material according to motor loading and timers. Parameters can be easily configured on site to suit the materials being processed. Output size is controlled by replaceable screens mounted beneath the rotor shaft in hydraulic operated screen support cradle. Nlodpeztxmtsfx Ahfef

Condition: new, Year of construction: 2026, rotor diameter: 400 mm, number of blades: 55, rotor length: 1,200 mm, power: 55 kW (74.78 HP), rotational speed (max.): 80 rpm, Genox V1200 Series - Single Shaft Shredder suitable for processing various materials including plastics, wood, rubber, paper, copper cable etc. 55kW Drive Motor with heavy duty oversized gearbox, 80rpm shsft speed as standard. Nledpfjztxlpox Ahfof 1200mm wide x 400mm diameter Rotor with 55pcs 40mm Concave reversible alloy steel blades. Hydraulic force feeding of material according to motor loading and timers. Parameters can be easily configured on site to suit the materials being processed. Output size is controlled by replaceable screens mounted beneath the rotor shaft.

Condition: excellent (used), Year of construction: 2023, BINDER VD 56 Vacuum Drying Oven with VD-M 53 Pump Module Manufacturer: BINDER GmbH Type: VD 56 Year of Manufacture: 2023 Machine Type: Vacuum Drying Oven Internal Volume: 55 liters Maximum Temperature: 220 °C Offered is a BINDER VD 56 vacuum drying oven from 2023, including a matching BINDER VD-M 53 pump module and a BINDER VAP 1 vacuum pump. The system is designed for gentle drying of materials under vacuum conditions and is particularly suitable for laboratory, research, development, quality control, and industrial process applications. Technical Data: Manufacturer: BINDER GmbH Model: VD 56 Article Number: 9630-0002 Version: VD056-230V Year of Manufacture: 2023 Internal Volume: 55 l Temperature Range: +9 °C above ambient temperature to +220 °C Heating Time to 100 °C: approx. 80 min Spatial Temperature Deviation at 100 °C: ± 1.2 K Temporal Temperature Deviation at 100 °C: ± 0.1 K Leak Rate: 0.01 bar/h Nsdpfxjzt R D Re Ahfolf Vacuum Connection: DN 16 Measurement Port: DN 16 Rated Voltage: 200–230 V Mains Frequency: 50/60 Hz Rated Power: 1.4 kW Protection Class: IP20 Made in Germany Pump Module: Manufacturer: BINDER GmbH Type: VD-M 53 Article Number: 8012-1943 Year of Manufacture: 2023 Voltage: 200–230 V / 50–60 Hz Power: 1.80 kW Current Consumption: 8.0 A Phase: 1N~ Protection Class: IP20 Vacuum Pump: Manufacturer: BINDER GmbH Type: VAP 1 Article Number: 5013-0217 Year of Manufacture: 05/2023 Pumping Capacity: 2.0 / 2.2 m³/h Ultimate Pressure: < 7 mbar Voltage: 230 V Frequency: 50/60 Hz Current Consumption: 1.6 / 1.5 A Protection Class: IP40 Dimensions: VD 56 without attachments and connections: Width: approx. 638 mm Depth: approx. 461 mm Height: approx. 815 mm Internal Dimensions: approx. 400 × 343 × 400 mm (W × D × H) Net Device Weight VD 56: approx. 96 kg Maximum Load per Shelf: 20 kg Maximum Total Load: 60 kg Equipment: Digital controller with pressure and temperature display Program-controlled drying monitoring Automatic ventilation at the end of the process Internal data logger Ethernet interface Universal ventilation for inert gas or ambient air Vacuum connection DN 16 Measurement port DN 16 Safety glass pane with splinter protection Large viewing window Insert shelf BINDER VD-M 53 pump module BINDER VAP 1 vacuum pump Vacuum and connection hoses Connecting and mounting parts Operating and assembly instructions Further accessories as shown in the pictures Shipping Data: Weight VD 56: approx. 96 kg Due to size and weight, shipping by freight forwarder is required. Condition: Used Year of Manufacture 2023 Optical condition as shown in the pictures Nameplates are present Scope of Delivery: 1 × BINDER VD 56 Vacuum Drying Oven 1 × BINDER VD-M 53 Pump Module / Pump Cabinet 1 × BINDER VAP 1 Vacuum Pump Vacuum and connection hoses Connecting and mounting parts Connection cables Operating and assembly instructions Accessories as shown in the pictures The unit is available for short-term delivery. Scope of delivery as shown in the pictures. Subject to change, errors and prior sale.

Condition: refurbished (used), Year of construction: 2011, machine/vehicle number: R-00665, load capacity: 125 kg, arm reach: 3,005 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC R-2000iB/125L manufactured in 2011.11. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: R-2000iB/125L Model Number: A05B-1329-B261 Year of Manufacture Robot: 2011.11 Warranty term (months): 12   Payload (kg): 125 Reach (mm): 3005 Repeatability (mm): ± 0.2 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1190   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2012.11 RCC Length (m): 7   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10 Nlsdpfx Ajzulfxshfef    

Condition: used, diameter / mm Cutting (quantity) / weight / kg Siemens MINI-BHG-1B Control Pendant / Handheld Operator Panel – 6FX2007-1AD00 For sale is a used Siemens MINI-BHG-1B handheld operator panel with emergency stop button and coiled cable. The unit is in used condition with normal signs of wear (see pictures). Technical Details: Manufacturer: Siemens Model: MINI-BHG-1B Nlodpfx Ahsy T Sc Refof Part Number: 6FX2007-1AD00 Voltage: 24 VDC Output: 5 VDC / 90 mA Equipped with emergency stop button Includes coiled cable and connector Condition: Used Good overall cosmetic condition with minor storage and usage marks Functionality not fully tested / sold as used equipment Scope of Delivery: Siemens MINI-BHG-1B handheld operator panel Connection cable as shown in the pictures Private sale / used item: No warranty, guarantee, or returns.

Condition: refurbished (used), Year of construction: 2015, machine/vehicle number: R-00546, load capacity: 280 kg, arm reach: 2,655 mm, controller manufacturer: R-30iB B-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC M-900iB/280 manufactured in 2015.08. The robot comes with an R-30iB B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC  Njdpjzuabhofx Ahfslf Model: M-900iB/280 Model Number: A05B-1335-B205 Year of Manufacture Robot: 2015.08 Warranty term (months): 12   Payload (kg): 280 Reach (mm): 2655 Repeatability (mm): ± 0.1 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 1700   Controller: R-30iB B-Size Year of Manufacture Cabinet: 2015.07 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10

Year of construction: 2008, condition: used, 2008 | Powerscreen Horizon 6203 | Used Screen 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 42900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 71 inspection points 51 approved ✅ 16 imperfect ℹ️ 4 issues ⚠️ Nlodpfxjzuaxys Ahfsf 📌 Inspector's Comment: Several bodywork tasks are required, as well as labor time and some small hydraulic motors. Perhaps replace the entire sieve with a standard exchange, but after the work, it remains overall a functional machine and a rare model. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40954 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, Year of construction: 2026, functionality: fully functional, rotor diameter: 480 mm, rotor width: 1,500 mm, power: 110 kW (149.56 HP), rotational speed (max.): 80 rpm, Genox K1500 Series - Heavy Duty Single Shaft Shredder suitable for processing various materials including plastics, wood, rubber, paper, copper cable etc. 110kW Drive motor (90kW & 150kW dual drive options also available) with heavy duty oversized gearbox, 80rpm shaft speed as standard. 1500mm wide x 480mm diameter Rotor with 88pcs, 40mm Concave reversible alloy steel blades. 60mm blades are also available. Hydraulic, fast acting swing type ram force feeding of material according to motor loading and timers. Parameters can be easily configured on site to suit the materials being processed. Output size is controlled by replaceable screens mounted beneath the rotor shaft in hydraulic operated screen support cradle. Nedpfx Aozudh Eohfelf

Condition: new, Year of construction: 2026, functionality: fully functional, rotor diameter: 650 mm, rotor width: 2,200 mm, rotational speed (max.): 80 rpm, Genox BH2200 Series - Heavy Duty Single Shaft Shredder suitable for processing various materials including plastics, wood, rubber, paper, copper cable etc. 180kW combined motor power (150kW & 220kW options also available) with heavy duty oversized gearboxes, 80rpm shaft speed as standard. Njdszudi Njpfx Ahfelf 2200mm wide x 650mm diameter Rotor with 95+6 pcs, 40mm Concave reversible alloy steel blades. 60mm blades are also available. Hydraulic force feeding of material according to motor loading and timers. Parameters can be easily configured on site to suit the materials being processed. Output size is controlled by replaceable screens mounted beneath the rotor shaft in hydraulic operated screen support cradle.