Used Burkle for sale (43)

Condition: used, Belt sanding machine BÜRKLE BSU 2500/800 - used - Sanding belt cover, Extraction fan ----- Technical data ----- Table size: 2,500 x 800 mm, Motor: 5.5 kW, Sanding belt dimensions (LxW): 7,200 mm Cedpfxoxlt Ebo Acvsgr

Condition: used, Veneer Press BÜRKLE U 80 - used - Emergency stop cable, Control via push button ----- Technical Data ----- Cgjdpfx Acoxfg A Hovor Pressing area: 2,550 x 1,300 mm Power per heating plate: 9,100 W Max. opening height: 4,000 mm Number of cylinders: 6 pcs. Dimensions (LxWxH): 3,150 x 1,450 x 1,785 mm Weight: 3,700 kg

Condition: ready for operation (used), machine/vehicle number: 5981, Working height: 870 mm Working width: 1300 mm Conveyor belt width: 1270 mm Conveyor speed: 6 - 30 m/min, infinitely variable Passage height: 3 mm - 80 mm 1 rubber-coated applicator roller: 238 mm diameter, coating 5 By 1 1 chrome-plated dosing roller: 174 mm diameter Electrical equipment: operating voltage 380 V, 50 Hz 3 phases Total connected load 1.9 kW Cgedpoyah Uzsfx Acvsr Motors and switching devices in EX-protected (explosion-proof) design Additional equipment: individual drive of the dosing roller, infinitely variable with oscillating dosing roller doctor blade Operator side: left Machine length: 1000 mm Weight: 1000 kg

Condition: good (used), Working height: 870 mm Working width: 1300 mm Transport speed: 6–30 m/min, infinitely variable Cedsyah Twepfx Acvsgr Passage height: 3 mm – 90 mm 1 rubber-coated application roller: 238 mm diameter, rubber coating 5 By 1; application roller width: 1416 mm 1 chrome-plated metering roller: 174 mm diameter, metering roller width: 1416 mm 1 rubber-coated counter-pressure roller: 190 mm diameter, counter-pressure roller width: 1300 mm Electrical equipment: Operating voltage 400 V, 50 Hz Total connected load: 1.87 kW Motors and switchgear in explosion-proof design, wired to a terminal box on the machine. Non-explosion-proof control in a separate control cabinet for installation outside the machine's hazardous area Additional equipment: Independent drive for the metering roller 2–7 m/min, without doctor blade, for synchronous operation of the metering roller Operating side: left Machine length: 975 mm Weight: 1000 kg

Condition: good (used), Working height: 870 mm Working width: 1300 mm Workpiece thickness / pass-through height: 3-120 mm Minimum workpiece length: 350 mm 1 rubber-coated applicator roller: 238 mm diameter, rubber coating 5 By 1 Peripheral speed: 6-30 m/min 1 chrome-plated dosing roller: 174 mm diameter Peripheral speed: 1-7 m/min 1 rubber-coated counter roller: 186 mm diameter Feed rate: 6-30 m/min Electrical equipment: Operating voltage 400 V, 50 Hz Total connected load: 2 kW Motors and switching devices in explosion-proof design on the machine. Non-ex explosion protection control in a separate switch cabinet for installation outside the hazardous area of the machine. Additional features: Motorized height adjustment via pushbutton on control panel Csdpfxoyah Tqe Acvegr Reversing switch for dosing roller Cleaning circuit for dosing roller Operator side: left Machine length: 800 mm Maximum machine width (without control cabinet): 2870 mm Weight: 1450 kg

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 8484.20, height adjustment type: mechanical, total length: 2,690 mm, total width: 1,200 mm, total height: 1,700 mm, input frequency: 50 Hz, Bürkle glue spreader Manufacturer Bürkle - year of construction 1998 - DAH 1300 Cgsdpfx Acjt I S H Asvsr Technical data: - Type DAH - 4 roller machines - Workpiece width 50-1300mm - Workpiece length 250mm - Working height 3-100mm - Application roller diameter 239mm - Dosing roller diameter approx. 174mm - Main motor approx. 3kW - Feed rate max. 45 m/min The sale takes place under exclusion of any warranty.

Year of construction: 1997, condition: ready for operation (used), functionality: fully functional, working width: 1,100 mm, working length: 2,350 mm, machine/vehicle number: 8081.02, TECHNICAL DETAILS Working length: 2,350 mm Cgsdpfx Acjydn Nmevjr Working width: 1,100 mm Max. processing thickness: 35 mm EQUIPMENT double working surface cutting device for the sheet to be processed

Year of construction: 1997, condition: ready for operation (used), functionality: fully functional, empty load weight: 13,200 kg, working width: 1,100 mm, workpiece height (max.): 35 mm, working length: 2,350 mm, machine/vehicle number: 8081.02, TECHNICAL DETAILS Cjdpfx Acsxyi Rpovogr Working length: 2,350 mm Working width: 1,100 mm Max. machinable thickness: 35 mm Part dimensions max. Max. panel size: 1,100 mm × 2,350 mm Film width min. Min. film width: 1,300 mm MACHINE DETAILS Installed power: 38 kW Dimensions & weight Heating plate dimensions (W × L): 1,400 mm × 2,600 mm Usable surface (W × L): 1,180 mm × 2,430 mm Weight: 13,200 kg

Condition: used, Membrane press with double work surface Cutter for cutting the sheet to be applied - Working length: mm 2350 - Working width: mm 1100 - Maximum workable thickness: mm 35 - Installed power: 38 kW - Weight: 13200 kg Cedpsw Dfkcefx Acvogr

Condition: ready for operation (used), Year of construction: 2003, Brand: Burkle Model: SLC Machine no: 10362-02 Year of manufacture: 2003 Technical data of the machine (BURKLE SLC) General data - Type: SLC - Working width: 1300 mm - Working height: 900 ± 20 mm Workpieces - Workpiece characteristics: Flat, self-rigid - Workpiece width (max): Working width - Workpiece width (min): 350 mm - Workpiece length: 3 - 100 mm - Tolerance of the workpiece height over the entire working width: - Single track operation: ± 0.5 mm - Multi-track operation: ± 0.2 mm - Workpiece weight (max): 250 kg Piling material - Inspection material/cleaning agent with a self-ignition temperature: ≥ 200 °C Transport unit - Back pressure roller: See order confirmation - Rubber ring: See order confirmation - Diameter: 186 mm - Feed speed: 8 - 25 m/min Material circulation - Material pump feed capacity (double stroke): 575 cm³ Piling unit Piling roller - Rubber ring: See order confirmation - Diameter: 238 mm - Temperature (in case of optional heating/cooling application roller): Max 60 °C - Peripheral speed: Approx. 8 - 25 m/min Dosing roller - Diameter: 174 mm - Temperature (with optional heated/cooled dosing roller): Max 60 °C - Peripheral speed: Approx. 3 - 9 m/min Accuracy of application over the entire working width at: - Application rate > 10 g/m²: ± 5 %. - Application rate < 10 g/m²: ± 10 % Adjustment of the feed-through height - Feed-through height (max): 120 - 5 mm - Accuracy of setting: ± 0.1 mm Compressed air connection - Required air pressure: 6 bar - Compressed air consumption: Approx. 50 NI/min Dimensions / weights - Dimensions: See installation drawing - Weight at working width 700 / 1300 / 1600 mm: 1250 / 1450 / 1600 kg Electricity - Connection values, voltages: See data sheet for electricity Other information - Noise level: < 70 ± 4 dB (A) Table 1-4: Technical data for standard sizes of the machine (continued) Note: The speed is limited to a maximum of 20 m/min when the dosing roller and height setting are set to a safety distance exceeding 120 mm (cleaning coupling). Cgedpsv Hw Hcofx Acvsr Stock no: 2002442BXM

Condition: ready for operation (used), Year of construction: 2003, machine/vehicle number: 10362, Brand: Burkle Model: SLC Machine no: 10362-01 Year of manufacture: 2003 Technical data of the machine (BURKLE SLC) General data - Type: SLC - Working width: 1300 mm - Working height: 900 ± 20 mm Workpieces - Workpiece characteristics: Flat, self-rigid - Workpiece width (max): Working width - Workpiece width (min): 350 mm Codpfxsv Hn N Uo Acvjgr - Workpiece length: 3 - 100 mm - Tolerance of the workpiece height over the entire working width: - Single track operation: ± 0.5 mm - Multi-track operation: ± 0.2 mm - Workpiece weight (max): 250 kg Piling material - Inspection material/cleaning agent with a self-ignition temperature: ≥ 200 °C Transport unit - Back pressure roller: See order confirmation - Rubber ring: See order confirmation - Diameter: 186 mm - Feed speed: 8 - 25 m/min Material circulation - Material pump feed capacity (double stroke): 575 cm³ Piling unit Piling roller - Rubber ring: See order confirmation - Diameter: 238 mm - Temperature (in case of optional heating/cooling application roller): Max 60 °C - Peripheral speed: Approx. 8 - 25 m/min Dosing roller - Diameter: 174 mm - Temperature (with optional heated/cooled dosing roller): Max 60 °C - Peripheral speed: Approx. 3 - 9 m/min Accuracy of application over the entire working width at: - Application rate > 10 g/m²: ± 5 %. - Application rate < 10 g/m²: ± 10 % Adjustment of the feed-through height - Feed-through height (max): 120 - 5 mm - Accuracy of setting: ± 0.1 mm Compressed air connection - Required air pressure: 6 bar - Compressed air consumption: Approx. 50 NI/min Dimensions / weights - Dimensions: See installation drawing - Weight at working width 700 / 1300 / 1600 mm: 1250 / 1450 / 1600 kg Electricity - Connection values, voltages: See data sheet for electricity Other information - Noise level: < 70 ± 4 dB (A) Table 1-4: Technical data for standard sizes of the machine (continued) Note: The speed is limited to a maximum of 20 m/min when the dosing roller and height setting are set to a safety distance exceeding 120 mm (cleaning coupling). Stock no: 2002443BXM

Condition: excellent (used), Year of construction: 2011, BÜRKLE PAINT LINE Csdpfxov I Ur Se Acvsgr Model year: 2011 Stock no.: 2002451BXM Consisting of: Disc conveyor 900 Roller coating machine e.a. sy-Coater RCLD 1300 Distribution/scraping brush machine VBM 1300 Cleaning machine RMB 1300 Disc conveyor 900 Central cabinet, Control panel with touch screen Technical data: Software Easy line, touch screen TP177 Micro Working width = 900/1300 mm, working side right Feed speed 5–25 m/min Distance between machines approx. 25 mm Power: 400 volts, 50 hz, 3 phases, rated power 10kw, rated current 23 AMP, fuse 35 AMP Electrical cabinet 1600x500x2200mm Operating side right Pneumatics Air pressure 6 bar P1 | G 1/4 | 50 NL/min P2 | G 1/4 | 10 NL/min Extraction per connection point At air speed approx. 24 m/sec. 140 mm | 1100 m³/h Roller application machine Bürkle RCLD09M Rubber application roller above/below Chrome-plated dosing roller above/below Working width 1300mm Workpiece length min. 400mm Workpiece height 3-80mm Brushing machine VBM For:Scraping/brushing/polishing of liquid wood stains, (solvent or water-based stain) or for polishing UV waxes Working width Workpiece length min. 350mm Workpiece height 110mm Cleaning machine RMB For cleaning brushes 1 or 2 with cleaning agent (water or solvent) and drying them.

Condition: excellent (used), Year of construction: 2004, I sell the 1-cylinder roller coater BURKLE SLC1300. Year 2004 Working width 1300mm Very good condition. Fully working. Cgodpfx Acjwun Hbjvsr Available immediately.

Condition: excellent (used), Year of construction: 2010, I sell the 1-head 1-lamp UV-drying tunnel Burkle TRUV 1300 Year 2010 Working width 1300mm. Total length 2,00m Total power 18,7kW 1 Lamp GA 120 W Very good condition, available immediately. Cgjdpfx Aovxa T Ajcvor

Condition: excellent (used), Year of construction: 2016, I sell the 2-head 2-lamp UV-drying tunnel Burkle UV2 1300 Year 2016 Working width 1300mm. Cedpfot S D U Tjx Acvjgr Total length 2,80m Total power 36,6kW 2 Lamps GA 120 W + HG 120 W Very good condition, available immediately.

Condition: excellent (used), Year of construction: 2015, I sell the 2-head 2-lamp UV-drying tunnel oven Burkle TRUV 1300 Year 2015 Working width 1300mm. Cjdpsw Ancljfx Acvjgr Total length 2,80m + 3,00m Total power 36,6kW 2 Lamps GA 120 W + HG 120 W Very good condition, available immediately.

Condition: new, Year of construction: 2014, I sell the Hot Air drying tunnel BURKLE Modell: Easy Dry JET 1300 Filter: TRDUE / 700 m3/hr. Ventilator 7,5kW / 6800m3/hr. / 35 m/s Working width: 1400mm Cgoder Arrwspfx Acvjr Total length: 6,00m Elektric connection 36,5kW Heating system 12 blowing units Heating medium water up to 80°C Max. Heating power 45 kW Max. Temperature of heated surfaces 120°C Siemens Simatic Touch control panel Year 2014. Machine NEW, not used before ! Available immeditely.

Condition: good (used), Year of construction: 1999, 1) layer infeed systen (2 lines with 3 hoppers (300, 400, 500 mm) each incl. 2 2 x gluing units + 2 cut off saws 2) vacuum stacking unit + infeed transport belt for press 3) press unit 4) vacuum de- stacking unit + outfeed transport belt Cgodpfx Aehmk Umecvor 5) all control systems for complete line capacity: 10 strokes / min or approx 2400 layers/ 4 hrs Product: 3 layer lamella surface with max dimension 2208 x 186 x 4 mm