Used Laser Punch for sale (4,354)

Condition: excellent (used), Year of construction: 2014, Operating hours: 78,000 hours 5 kW resonator Gjdjwd Ng Uepfx Aacsuh Annual maintenance by Trumpf

Condition: good (used), functionality: fully functional, Year of construction: 2010, operating hours: 49,000 h, laser power: 2,000 W, punching force: 165 t, punching diameter: 76 mm, sheet thickness (max.): 4 mm, sheet thickness steel (max.): 4 mm, sheet thickness aluminum (max.): 4 mm, workpiece weight (max.): 120 kg, overall weight: 13,000 kg, workpiece length (max.): 2,500 mm, space requirement length: 6,800 mm, space requirement width: 6,150 mm, working range: 2,500 mm, Equipment: cooling unit, safety light barrier, Special Equipment: + Thread forming function + Softpunch function + Height-adjustable clamping shoe + Follow-up cylinder + Vibration-damped installation + Sensor for part chute + Die spray lubrication + Loading and unloading aid with brush Standard Equipment: - Robust C-frame - Coordinate guide with integrated linear magazine - 21 stations for tools and clamping shoes - 2 clamping shoes - Drives: maintenance-free three-phase servo motors - Brush tables - Laser TCF1 (2000W) - HI-LAS high-pressure cutting - High-speed processing with SprintLas - Programmable cutting gas selection/pressure adjustment - Laser cutting head with 5" lens - Quick-change device for cutting head - APC capacitive height control - Lens monitoring sensors - Laser logbook function - Compact dust extractor - Rotatable tool holder - Automatic follow-up device with hold-down - Automatic part chute for parts 300x500 mm - Automatic tool changer with 19 stations - 2 clamping shoes Guedpfx Aow Au Eaoacjh - Good parts container - Punch spray lubrication - 2nd lubricant container - Punch slug extraction - Chip bin - Hydraulic quick shutdown - External control panel - TFT color touch screen 15" - Interface for USB stick - 3.5" disk drive - Safety devices - RJ45 network connection - Network connectivity - Comprehensive operating manual - Remote diagnosis system

Condition: used, functionality: limited functionality, Year of construction: 2007, operating hours: 71,182 h, laser power: 2,700 W, punching force: 22 t, punching diameter: 75 mm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness aluminum (max.): 4 mm, sheet thickness brass (max.): 4 mm, sheet thickness copper (max.): 4 mm, positioning speed: 90 m/min, positioning accuracy: 0.01 mm, repeat accuracy: 0.01 mm, workpiece weight (max.): 230 kg, compressed air connection: 6 bar, overall weight: 15,000 kg, workpiece length (max.): 3,700 mm, workpiece width (max.): 1,500 mm, workpiece height (max.): 30 mm, cutting force: 200 t, space requirement height: 2,400 mm, space requirement length: 18,000 mm, space requirement width: 9,100 mm, tool length: 37 mm, Equipment: cooling unit, safety light barrier, The machine will be available from week 42 as agreed. Additional equipment: - Widening of the C-frame, allowing loading of sheets up to 3800 x 1500 mm with the SheetMaster - Laser TruFlow 2700 - MultiTool function - Thread forming function - Marking/High-speed beading function - MultiBend function - Roll technology - Post-processing cylinder - Warping detection - Chip conveyor Loading and dismantling must be carried out by the buyer! Gusdpfx Asxa Dx Ueacjh Condition: used Scope of delivery: (see image) (Specifications and technical data are subject to change and errors excepted!) Further questions can be answered by phone.

Year of construction: 2008, condition: ready for operation (used), Punching force: 220kN, working range combined operation X/Y: 2585mm/1650mm, working range punching operation: 3085mm/1740mm, working range laser operation X/Y: 3085mm/1650mm, max. sheet thickness mild steel/stainless steel/aluminum: 8mm/6mm/4mm, max. workpiece weight: 230kg. Positioning speed: 109m/min, max. stroke rate: 900 strokes/min, max. marking rate: 2800 strokes/min, tool positions: 18, accuracy: +/-0.1mm. Machine dimensions X/Y/Z: approx. 8000mm/9000mm/2500mm, weight: approx. 22500kg. Documentation available. An on-site inspection is possible. Expected to be available from November 2025. Guedpfjxddagox Aaceh

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 72,918 h, laser power: 2,700 W, punching force: 22 t, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 8 mm, sheet thickness aluminum (max.): 4 mm, TECHNICAL DETAILS Combined punching/laser operation: 2,585 x 1,650 mm Punching mode: 3,085 x 1,740 mm Laser operation: 3,085 x 1,650 mm Outputs Laser power: 140 - 2,700 W Maximum sheet thickness: 8 mm Cutting capacity for mild steel: 8 mm Cutting capacity for aluminum: 4 mm Cutting capacity for stainless steel: 6 mm Maximum punching force: 220 kN Active hold-down device (programmable in stages): 4.5 - 20 kN Maximum workpiece weight: 230 kg Speeds Maximum positioning speed X-axis: 90 m/min Y-axis: 60 m/min Simultaneous (X and Y): 108 m/min C-axis punching: 60 revolutions/min Thread forming: 180 revolutions/min Punching stroke sequence (E = 1): 900 1/min Marking: 2,800 1/min Tools Guedpfx Aew Suwyjacjh Linear magazine: 18 tools with 3 clamps Tool change time: 1.5 - 5 s Tool accuracy Position deviation: ±0.10 mm Average position spread: ±0.03 mm Programmable slides for punched and laser parts (max.) Size: 500 x 500 mm TRUMPF CNC control: based on Siemens Sinumerik 840D MACHINE DETAILS Laser switch-on time: 72,918 h Cutting time: 18,536 h Space requirement (width x length): 7,900 x 9,100 mm Height: 2,400 mm Weight: 22,500 kg Laser gas consumption CO2 / N2 / He: 1 / 6 / 13 l/h Connected load: 73 kVA

Condition: good (used), functionality: fully functional, Year of construction: 2006, operating hours: 17,000 h, Trumpf TruMatic 6000 FMC -1300 Sheetmaster + Gripmaster Manufacturer: Trumpf Type: TruMatic 6000 FMC -1300 Year of manufacture: 2006 Condition: used, very good. Regularly serviced by Trumpf. Machine is powered and in use. Operating hours NC hours: 70,305h Beam-on hours: 17,217h Control: Siemens Sinumerik 840 D Punching force: 220KN Laser power: 2700W Working area for laser operation approx.: 2585 x 1280 mm Working area for punching operation approx.: 2585 x 1370 mm Max. sheet thickness approx.: 8 mm Support tables Brush tables CE marking Standard equipment: Stable, easily accessible C-frame Coordinate guide with integrated linear magazine, 21 places for tools and clamping claws 1 clamping claw Maintenance-free three-phase servo motors Parts chute 500 x 500 mm (sensor-monitored) HI-LAS high-pressure cutting TRUMPF laser: CO2 laser TLF 2700 High-frequency excitation Laser control TASC 3 Cutting head: Laser cutting head 5″ Laser cutting head 7.5″ Quick change device Cutting gas pressure setting programmable Distance control DIAS ContourLas Punching head: Hydraulic mono tool holder 360° rotation Programmable hold-down device Tool spray lubrication Punching slug extraction Control: Sinumerik 840D Gusdswyphdspfx Aaceh 10.4″ TFT color screen Teleservice Automatic switch-off 3.5″ floppy disk drive RJ45 network connection MDE interface Safety: Multi-beam light barriers Quick switch-off hydraulics Compact dust extraction system Options: Automatic switch-off Thread former Soft punch Adaptive stroke calibration Adjustment cylinder Individually openable claws Chip conveyor with container Multishear Multitool Control Brush tables Automation SheetMaster (loading and unloading during production) Scissor lift table Chip conveyor with container TrumaGripMaster TrumaSortmaster R4 TwinCarts (unloading) Spreading magnet Rotor scanner (unloading monitoring) Autolas Plus Remaining grid pallet 2500x1250mm

Condition: excellent (used), Year of construction: 2013, operating hours: 8,500 h, stroke length: 445 mm, number of axes: 6, Number of axes: 6 Pressing force: 3,200 kN Max. machining length: approx. 440 cm Guodpfswxwwdex Aacoh Weight: 22,800 kg Max. load capacity: 150 kg Runway length: 12 meters

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 21,346 h, laser power: 3,200 W, X working area max.: 3000 mm Y working area max.: 1600 mm Control: Rexroth IndraMotion MTX Laser power: 3000 watts Machine - Enclosed machine frame - Hybrid axis system - Linear magazine with 20 slots for clamps and tools - Hydraulic clamps (3 pieces) - Maintenance-free three-phase motors for drives - Repositioning device with programmable hold-down - Foot pedal for clamp closing - Beam protection with direct access - Parts chute on the right - Parts flap on the left - Sensor for parts flap Gjdpfoxhmtwjx Aaceuh - Work area illumination - FocusLine - Retrofittable for SortMaster Compact - Protective tool - Transport and installation device TRUMPF Laser - Laser light cable (LLK) according to standard layout (10m) - Laser power control - Laser logbook function - Closed beam guidance via laser light cable (LLK) - Separate power supply for TruDisk Compact Cutting Unit - Solid-state laser compact cutting unit - Protective glass - Collision protection - ControlLine Punching Head - Delta Drive - Rotatable mono-tool adapter - Programmable hold-down position - Tool length compensation - Punch spray lubrication - Punch slug extraction - Forming function - Stroke counter for punch Control - TRUMPF control based on Rexroth IndraMotion MTX - Touch panel with 19'' TFT color screen - Integrated technology data - Programmable cutting gas pressure - Remote support interface - Auto shut-off with wake-up function - Program management - Production plan Data Transmission - USB interface - RJ-45 network interface - Central Link - Online Update Manager Safety - CE marking - Two-beam safety light curtain Extended Standard Equipment - TruDisk 3001 solid-state laser with 1 LLK output - Chiller (water-air) - Compact dust extraction system - 1st locating pin (right inside) - Ball tables - Good parts container for parts chute - Chip container for rear removal Extended Laser Equipment - Copper cutting package - Brass cutting package Extended Punching Equipment - MultiShear function - Multitool function - MultiBend function - Thread forming with thread counter Thread former breakage monitoring Lubricant level monitoring - Marking/fast embossing function - Engraving function - Deburring and roller technology function - Ejecting small parts function Parts Ejection - Integrated sorting function for parts chute • Sensor for parts chute • Tray line for 4 standard trays 300 x 400 mm • Customer-supplied trays Extended Machine Equipment - 1x additional clamp - Machine rated for ambient temperatures up to 43°C Special Sheet Metal Processing - Brush tables - Warping detection Options for Compact Dust Collector - CO2 extinguishing system for the compact dust collector Data Transmission - Wireless Operation Point Machine Accessories - 1 set RTC cassettes incl. die plate SheetMaster Compact - SheetMaster Compact 3000 x 1500 mm (AK05) • Loading station with spreader magnet for sheet separation • Suction frame • Vacuum sensor system • Double sheet detection • Unloading cart for scrap grid and microjoint sheets • 2nd operator's station for loading and unloading.

Condition: used, functionality: fully functional, Year of construction: 2004, operating hours: 35,000 h, laser power: 2,700 W, punching force: 22 t, workpiece weight (max.): 230 kg, Equipment: cooling unit, TECHNICAL DETAILS Punching force: 22 tons Control system: Siemens Sinumerik 840 D Punching work area: 3,085 x 1,740 mm Combined work area: 2,585 x 1,650 mm Max. sheet thickness: 8 mm Max. workpiece weight: 230 kg Max. punching diameter: 76.2 mm Rapid traverse X / Y / simultaneous: 90 / 60 / 108 m/min Tool holder: Hydraulic mono-tool holder, 360° rotation Pressure clamp: Programmable for repositioning operations Chip handling: Chip bucket Laser unit: High-frequency excited TruFlow CO₂ laser Laser work area: 3,085 x 1,650 mm Laser power: 2,700 watts Laser cutting heads: 5" lens 7.5" lens, quick-change cutting head system Distance control: DIAS Cutting technology: HI-LAS high-pressure cutting Functions: AutoLas, ContourLas Laser control: TASC 3 MACHINE DETAILS Width: 2,400 mm Length: 8,700 mm Height: 7,800 mm Total weight: 22,500 kg On-time: 35,000 h Guodpfx Aajv N Hxaocoh Laser on-time: 2,507 h Beam on: 480 h EQUIPMENT - 500 x 500 mm sensor-monitored parts chute - 2 good parts crates - AutoLas - ContourLas - Ejection cylinder on laser chute - Automatic tool length compensation - Tool spray lubrication - Punch slug extraction - 2nd lubricant container - Multi-beam Light barriers - Hydraulic quick-release system - Extraction and compact dust extractor - MultiTool function - Thread forming function - Multishear function - Multibend function - Singing/fast beading function - TRL Sheetmaster preparation - Vibration-damped installation - Brush tables

Year of construction: 2001, condition: ready for operation (used), Max. cutting force: 220kN, laser power: 3200W, nitrogen connection: 30bar, oxygen connection: 20bar, connected load: 76kVA, operating hours at the beginning of 2025: 67,766h, with Trumpf TLF 3200 laser and RIEDEL L 15/21 TR3/19.00 cooler, refrigerant: R134a, filling weight: 11.5kg, high pressure: 20.2bar. Tools additionally available. An on-site inspection is possible. Godpew Uk A Refx Aacouh

Condition: good (used), functionality: fully functional, Year of construction: 2008, operating hours: 41,804 h, used TRUMPF TruMatic 6000 (K01) – Medium format Technical data: Year of manufacture: 2008 Last maintenance: 18.03.2025 Operating hours NC: 41804 Resonator hours: 14466 Beam ON hours: 2054 Y-Axis: 1300 mm Additional equipment: various tools Recently installed new parts: Conversion to laser control TASC5 (01/2025) Control panel with display (01/2025) Gedpfx Aajwkd Efsceuh Box PC (01/2025) Hydraulic punching head/multilayer (10/2021)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 97,000 h, laser power: 2,500 W, sheet thickness (max.): 6 mm, workpiece length (max.): 2,000 mm, workpiece width (max.): 1,500 mm, Submission of a bid obligates the buyer to collect the machine on time by 05/09/2025! The machine has been serviced by the manufacturer. TECHNICAL SPECIFICATIONS Power and Cutting Force Cutting force: 300 kN Power: 2.5 kW (CO₂) Workpiece Cutting elements to length: 3,020 × 1,500 mm Laser cutting length: 2,000 × 1,500 mm Max. sheet thickness: 6 mm Stations Turret station: 41 fixed and 4 rotatable stations MACHINE DETAILS Electrical Data Connected load: 400 V / 68.3 kVA Apparent power: 60 kVA Compressed Air Connection Compressed air connection: 8 bar Compressed air consumption: 48 m³/h Occupational Safety Width of protected area: 30 m Minimum safety distance: 1.36 m Machine reaction time + total fire protection wall reaction time: 320 ms Guedpfx Aew Axa Ueacsh Overrun time: 300 ms Machine braking distance: 180 mm Weight of the punching/laser machine: 30,000 kg EQUIPMENT Automatic part removal (suction cups) up to 45 kg Automatic sheet metal feed max. 3,050 × 1,500 mm Automatic bale output 1,500 × 400 mm Double loading ramp Light barrier Wire cutting kit Bale push sensor Chip extraction Conveyor for offcuts removal Separate lubrication for punching and threading tools Sheet bending sensors Punches included in the offer Loading of the machine can be arranged upon request. A large tooling package can be purchased for an additional 10,000 EUR.

Condition: good (used), functionality: fully functional, Year of construction: 2006, operating hours: 48,000 h, machine/vehicle number: A0230A1295, laser power: 5,000 W, sheet thickness steel (max.): 25 mm, sheet thickness aluminum (max.): 12 mm, No minimum selling price - guaranteed knockdown to the highest bid! TECHNICAL DETAILS Make: TRUMPF Type: Trumatic L 3050 - 5 kW Year of manufacture: 2006 Working range X-axis: 3,000 mm Y-axis: 1,500 mm Z-axis: 115 mm Control system Type: Siemens Sinumerik 840 D Laser power Laser power: 5,000 W Max. Sheet thickness: Mild steel 25 mm Max. Sheet thickness: Stainless steel 20 mm Max. Sheet thickness: aluminum 12 mm Operating hours Operating hours: approx. 48,000 hours EQUIPMENT Closed machine frame with integrated laser unit Laser unit: TLF 5000 CO₂ laser, high-frequency excited, cooling unit, logbook function Automatic pallet changer Guodpfxeu R Sa Ao Aacoh Longitudinal conveyor belt for small parts/waste Drives: Gantry drive in combination with linear direct drives Laser power control HI-LAS high-pressure cutting Plasma sensor system (PMS) Fast processing with SprintLas ContourLas for the production of small holes Programmable power cycles Microweld Programmable cutting gas pressure setting Laser cutting head with 5" lens and laser cutting head with 7.5" lens Quick-change cutting head device Automatic sheet outer edge detection Capacitive height control (DIAS) Process Control System (PCS) Position laser diode Automatic switch-off Work area lighting SIN 840D control system: Open control system on PC basis, simple operation, online help, diagnostic functions, maintenance logbook, technology data, teleservice Workshop programming ToPs 100 lite Safety and security Multi-beam light barriers Beam guidance completely encapsulated and ventilated with nitrogen Monitoring system Multi-chamber extraction and compact dust extractor Protective cabin Network connection BNC/RJ-45 network connection Electrical equipment Voltage: Three-phase current 400 V / 50 Hz EXTENDED EQUIPMENT Liftmaster included

Condition: good (used), functionality: fully functional, Year of construction: 2007, laser power: 3,200 W, X working area max.: 3085 mm Y working area max.: 1650 mm Control: Siemens Sinumerik 840 D Laser power: 3200 Watts Operating hours: Power supply 41,117 h Laser ready 37,005 h Guodpfx Aow I Rq Ieaceh Laser beam on: 7,365 h Standard equipment: - Hi-Las high-pressure cutting - Laser cutting head with 5'' lens - Laser cutting head with 7.5'' lens - Quick-change device for cutting heads - Programmable cutting gas selection/pressure setting - Capacitive height control (DIAS III) - ContourLas function - Slag cone detection - Compact dust extractor - Tank heater - Automatic tool changer with 17 stations (21 – clamping claws) - 3 clamping claws - Rotation of all tools - NC-controlled, digital, maintenance-free three-phase drives - Automatic repositioning - Tool length compensation - Fast shutoff of hydraulics - Automatic shutdown - Automatic part slides, each 500 x 500 mm - Sensors for both part slides - 2 good-part bins - Scrap slug extraction - Forming capability - Programmable punching tool lubrication - Programmable hold-down device - Adaptive stroke length control - Safety devices - Remote diagnostics unit - RJ 45 network connection - 3.5'' floppy disk drive + Warp detection + Blow-off device for small parts + AutoLas Plus (FocusLine) + Function for deburring and roller technology + Function for thread forming with thread former breakage monitoring + MultiShear function + MultiTool function + Marking/fast beading function + Softpunch function + Low-scratch processing + Repositioning cylinder + Vibration-damped installation + Chip conveyor with tipping container + Additional clamping claw Automation: + Peeling system + GripMaster (3000 x 1500 mm) + SheetMaster (3000 x 1500 mm) + Lift table (300 mm)

Condition: like new (used), Good parts conveyor belts for TruMatic 7000 / 6000 Gjdpfju S Ny Tjx Aacjuh Very good condition

Year of construction: 1995, condition: ready for operation (used), A laser cutting and punching machine Trumpf with an unknown defect (linear amplifier in order) is available. Press force: 220kN, laser power: 1500W (1.5kW), max. punching diameter: 76mm, max. workpiece dimensions X/Y: 2585mm/1280mm, max. sheet thickness mild steel/stainless steel/aluminum: 8mm/6mm/4mm, max. workpiece weight: 200kg, part dispenser X/Y: 500mm/500mm, magazine positions: 18, machine dimensions X/Y/Z: approx. 8000mm/7500mm/2400mm, weight: approx. 16000kg. On-site inspection is possible. Godpfx Ajwftdgsaceuh

Condition: used, Year of construction: 2001, operating hours: 13,030 h, machine/vehicle number: 090038, punching force: 2,200 t, We are offering our Trumatic 5000R laser punch press for sale. The machine is used and in very good condition. Basic data from the type plate: Max cutting force: 220 kN Type 9121 No. 090038 Year of manufacture: 2001, spare parts Network: 400 V/50 Hz Connected load: 29kVA Supply voltage: 400V Control voltage: 24V= Necessary protection: 3x50A Compressed air connection: 7-14 bar Machine weight: 17500kg Main features of the machine: - Tool rail - 21 tools and 4 handles - working area 3070x1660mm - max. sheet thickness 8mm - Rotation axis of the tool head C1 and C2 - Forming function - Thread function - Multibend function - Pneumatic press - automatic sliding of the details 500x500mm - water-cooled servomotors Additional equipment of the machine: - light barrier Softpunch function - Details slide sensor - Device for blowing out small details - System for chip extraction Gusdjunh D Dspfx Aacoh - Separate lubrication of punching and threading tools Number of NC units: 13030h We sell machines without tools. Machine regularly maintained by authorized Trumpf service with original spare parts, last machine maintenance on 21.02.2024r.

Condition: used, Year of construction: 2008, Working hours machine: 120266 h Laser power: 4000 Watt Max. punching force: 300 kN Control: AMNC-F Working range laser: 2500 x 1525 mm Working range punching: 3050 x 1875 mm Length: 6354 mm Width: 5880 mm Height: 2517 mm Machine weight: 30000 kg Electrical connected load: 85 kVA x-axis: 100 m / min y-axis: 80 m / min simultanes (x and y): 128 m / min Standard configuration - Patented servo-electric double drive- Punching force 300 kN - low energy consumption of the punching unit (maximum 7 kW, 1 kW in stand-by mode) Godpjwhb Rmofx Aacjuh - smooth-running, low-noise, low-wear and almost maintenance-free   - 780 punching strokes per minute - Optimum use of sheet metal - Punch & Forming for forming up to 20 mm in height - Multiple thread unit with four inserts from M 2.5 to M 6 - brush table for scratch-free processing Extended machine accessories - Z-revolver with 45 turrets (2 x B Station Auto Index / 2 x C Station Auto Index)- punch & forming- tapping Automation - loading and unoading system

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 14,161 h, machine/vehicle number: A0110A0036, laser power: 2,000 W, punching force: 16 t, sheet thickness (max.): 4 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, space requirement length: 6,000 mm, space requirement width: 6,900 mm, TECHNICAL DETAILS Combined operation: 2,175 x 1,250 mm Laser operation: 2,500 x 1,250 mm Punching mode: 2,500 x 1,250 mm Outputs Maximum sheet thickness: 4 mm Maximum punching force: 165 kN Maximum workpiece weight: 120 kg Laser power: 2000 W Laser speeds X-axis: 90 m/min Y-axis: 60 m/min Simultaneous: 108 m/min C-axis punching: 60 m/min C-axis thread forming: 180 m/min Punching stroke sequence: 600 1/min Stroke sequence marking: 1,300 1/min Tools Tool positions in the linear magazine: 19 (with 2 clamps) MultiTool capacity: 2 to 10-fold Number of tools in MultiTool: 19 to 190 Rotation of all tools: 360 Tool change time: 0.9 - 3.6 s Maximum punching diameter: 76.2 mm Maximum bending height (MultiBend): 25 mm Position accuracy Position deviation: ±0.1 mm Average position spread: ±0.03 mm MACHINE DETAILS Total weight: 12,500 kg Space requirement: 6,000 x 6,900 mm Guedsvgc Apspfx Aacjh Connected load: 55 kVA Laser cutting time: 14,161 h Laser switch-on time: 63,575 h

Condition: good (used), functionality: fully functional, Year of construction: 2014, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control: IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Coordinate guide for high-precision machining Godpfx Aaowld Sujcjuh - Stable, easily accessible C-frame - Linear magazine with 21 tool positions and 4 clamps - Drives with maintenance-free three-phase servo motors - Repositioning device with programmable hold-down device - Foot switch for clamp closing - Ball tables - 2 part flaps 500 mm x 500 mm - FocusLine - NitroLine - FastLine - Ejection cylinder for laser parts - Slag cone detection TRUMPF laser - TruDisk 3001 solid-state laser with 1 LLK outlet - Excitation via pump diodes - LLK according to standard layout (10m) - TruControl laser control 1000 - Cooling unit - Laser logbook function Cutting head - Solid-state laser compact cutting unit - ControlLine Punching head - Electro-hydraulic punching head - Rotatable mono tool holder - Tool length compensation - Programmable hold-down device (active / passive / repositioning) - Punch stroke counter and thread stroke counter - Spray lubrication of punch - Punch slug extraction - Calculation of filling level in the punching console - Level monitoring of thread forming and tool lubrication Control - Open control based on Rexroth IndraMotion MTX - Control panel with 17" touch control panel - Program management - Production plan - Integrated technology data - Teleservice via Internet - Programmable cutting gas pressure - Automatic switch-off with wake-up mode Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Two-beam light barriers - Monitoring system for, among others Gas pressure, temperature, cooling water - Quick shutdown hydraulics - Protection against scattered radiation - Compact dust extraction system - MultiTool function - MultiBend function - Thread forming function - Engraving function - Deburring and rolling technology function - SoftPunch function - StripLine - Lowerable die - Spray lubrication die including level monitoring - Additional clamping claw - 4 pcs. Height-adjustable clamping claws - Vibration-damped installation - Chip conveyor with tilting container - Blow-out device for small parts - Warping detection SheetMaster - Unloading platform - Suction frame with 36 suction cups - Peeling suction cup - Vacuum sensors for each suction cup - Double sheet detector for double sheet control - Central lubrication - TRUMPF control based on Rexroth IndraMotion MTX - Automatic clamp closing machine - Loading and unloading parallel to production time - Peeling system including positioning aid medium format (2500x1250) - First additional suction cup package standard - Second additional suction cup package standard - Unloading monitoring laser parts GripMaster - Parts conveyor belt punching station - Parts conveyor belt laser station ToolMaster with 70 stations (only for punching operation) - ToolMaster set-up parallel to production time

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, operating hours: 44,973 h, laser power: 2,700 W, punching force: 22 t, working range: 2,500 mm, Equipment: cooling unit, safety light barrier, Description X working range max.: 2585mm Y Working range max.: 1280mm Control: Siemens Sinumerik 840 D Laser power: 2700 Watt Laser beam on: 6054 hours Laser on: 29826 hours Operating hours: 44973 hrs. Standard equipment: - Sturdy C frame - Coordinate guide with integrated linear magazine, 21 places for tools and clamping claws - Drives: Maintenance-free three-phase servomotors - Programmable hold-down device for repositioning - Sensor-monitored 500x500mm parts chutes for punching and laser station, ejection cylinder on laser chute - Laser unit: High-frequency excited CO2 laser TLF 2700W, vibration-insulated, integrated in machine frame, incl. cooling unit and DIAS 3 laser controller - HI-Las high-pressure cutting - Fast processing with SprintLas - ContourLas for producing small holes - Cutting gas pressure setting programmable - Laser cutting head: 5'' lens, quick-change device, distance control - Sinumerik 840D control system, 10.4'' TFT color screen, simple operation, online help, diagnostic functions, maintenance logbook, technology data, job tables, Teleserice, 3.5'' floppy disk drive, RJ45 network connection Gsdpotpguzsfx Aacjuh Safety: Multi-beam light barriers, quick shut-off hydraulics, suction and compact dust extractor, protective device against stray radiation on the cutting head + TLF 2700 laser + Thread forming function + MultiTool function + Signing / fast beading function + MultiBend function + Rolling technology function + Repositioning cylinder + bulge detection + Chip conveyor automation + Sheetmaster + Gripmaster + Trumasort R4

Condition: used, Year of construction: 2015, Working hours machine: 31888 (17.01.2024) h Working hours laser on: 19090 (17.01.2024) h Working hours beam on: 6475 (17.01.2024) h Laser power: 4000 Watt Max. punching force: 300 kN Control: AMNC 3i Working range laser: 2500 x 1170 mm Working range punching: 3050 x 1525 mm Length: 7870 mm Width: 5880 mm Height: 2666 mm Electrical connected load: 85 kVA x-axis: 100 m / min y-axis: 80 m / min Weight of machine approx.: 30000 kg Standard configuration - Patented servo-electric double drive- Punching force 300 kN- 32 tool stations (4 rotatable stations)- max stroke rate: 400- max material thickness 6mm- Automatic focus adjustment- Automatic gas pressure control- HS sensor cutting head- Nozzle cleaning- Splash guard- Good parts flap Extended machine accessories Guedpfovb Ubyox Aacsh - TSU tool changer 300 Automation

Year of construction: 2006, operating hours: 46,547 h, condition: excellent (used), functionality: fully functional, Laser punch press Trumpf TruMatic 6000 L with TrumaLift SheetMaster, ToolMaster and GripMaster as well as and scissor lift table. SheetMaster: not only loads and unloads the machine, it also sorts the parts the parts reliably ToolMaster: automatically changes the tools quickly, safely and conveniently GripMaster: reliably moves residual grids and strips TECHNICAL DETAILS working area: 2585 x 1280 mm Control: Siemens Sinumerik 840 D laser power: 3200 watt sheet thickness mild steel: max. 8 mm sheet thickness stainless steel: max. 8 mm sheet thickness aluminum: max. 4 mm workpiece weight: max. 200 kg Accuracy: +/- 0.1 mm Punching force: 22 t punching diameter: max. 76,2 mm C-axis punching: 330 rpm stroke sequence: 450 - 1000 1/min Gujdsn Nxw Dopfx Aacoh stroke sequence marking: 2800 1/min MACHINE DETAILS Laser switch-on time: 46,547 h cutting time: 23.580 h length: 7500 mm width: 8100 mm height: 2400 mm Weight: 16000 kg (basic machine) Operating voltage: 400 V / 50 Hz Connected load: 76 kVA

Condition: good (used), functionality: fully functional, Year of construction: 2006, operating hours: 47,000 h, laser power: 2,000 W, punching force: 76 t, workpiece weight (max.): 120 kg, working range: 2,500 mm, Equipment: cooling unit, safety light barrier, Special features: + Thread forming function with thread breakage detection + MultiTool function + Marking/Fast beading function + Repositioning cylinder + Sensor for part chute Standard features: - Stable C-frame - Coordinate guide with integrated linear magazine - 21 pockets for tools and clamps - 2 clamps - Drives: maintenance-free three-phase servo motors - Brush tables - TCF1 laser (2000W) - HI-LAS high-pressure cutting - Fast machining with SprintLas - Programmable Cutting gas selection/pressure adjustment - Laser cutting head with 5" lens - Cutting head quick-change device - APC capacitive height control - Lens monitoring sensors - Laser logbook function - Compact dust extractor - Rotating tool holder - Automatic repositioning device with hold-down clamp - Automatic part chute for parts 300x500 mm - Automatic tool changer with 19 stations - 2 clamps - Good parts container - Spray lubrication for punches - 2nd lubricant container - Punch slug extraction system - Chip bucket - Hydraulic quick shut-off system - External control panel - 15" TFT touch color screen - USB stick interface - 3.5" floppy disk drive - Safety features Gsdpswcq Hgefx Aacjuh - RJ45 network connection - Network connection - Detailed operating instructions - Remote diagnostics system

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, operating hours: 44,973 h, laser power: 2,700 W, punching force: 22 t, sheet thickness (max.): 8 mm, travel distance X-axis: 2,585 mm, travel distance Y-axis: 1,280 mm, number of slots in tool magazine: 21, AUTOMATION - SheetMaster - GripMaster - TrumaSort R4 ADDITIONAL EQUIPMENT - Laser TruFlow 2700 - MultiTool function - Thread forming function - Marking/fast beading function - MultiBend function - Rolling technology function - Repositioning cylinder - Bulge detection - Chip conveyor TECHNICAL DETAILS Punching working area: 2,585 x 1,280 mm Laser working area: 3,085 x 1,370 mm Combined working area: 3,085 x 1,280 mm Control: Siemens Sinumerik 840 D Laser Laser power: 140 - 2,700 watts Wavelength: 10.6 µm Sheet thickness: 8 mm Workpiece weight: max. 200 kg Punching Punching force: 220 kN Active hold-down clamps: 4.5 - 20 kN Linear magazine: 21 tools Programmable slide: 500 x 500 mm Positioning speed X / Y / simultaneous: 90 / 60 / 108 m/min Guedpovxivmefx Aaceh C-axis punching: 60 rpm C-axis thread forming: 180 rpm Punching stroke sequence: 900 rpm Signing stroke sequence: 2800 rpm Position deviation: ± 0.10 mm Position scatter: ± 0.03 mm MACHINE DETAILS Length: approx. 7.5 m Width: approx. 8.1 m Height: 2.4 m Weight: 16 t Laser switch-on time: 29,826 h Cutting time: 6,054 h Machine switch-on time: 44,973 h Compressed air connection: 7 ± 1 bar Consumption of laser gas CO2 / N2 / He: 1 / 6 / 13 l/h EQUIPMENT - Stable, easily accessible C-frame - Drives with maintenance-free three-phase motors - Programmable hold-down device for repositioning - Sensor-monitored part slides for punching and laser station, ejection cylinder on laser slide - Laser unit: High-frequency excited CO2 laser, vibration-insulated, including cooling unit and laser control DIAS 3 - HI-Las high-pressure cutting - Fast processing with SprintLas - ContourLas for producing small holes - Programmable cutting gas pressure setting - Laser cutting head: 5'' lens, quick-change device, distance control - Multi-beam light barriers, quick hydraulic shutdown, extraction and compact dust extractor, protective device against scattered radiation on the cutting head