Used Buffing for sale (239)

Condition: as good as new (ex-display), Year of construction: 2025, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Bedpfx Asd R U Acegzjwi Glue pot with run-out function/optional), HF-cut-off saw station, HF-top and bottom milling unit, chain feed, double roller top pressure, extendable work piece support and signal lamp for work piece sequence. For ABS, PVC, melamine and strong wood veneer roll material as well as fixed lengths from 0.4 – 3.0 mm and of 8 – 50 mm work piece thickness. Speed: 7,0 m/min. • 2 spaces for finishing units • 7,0“ Colour Touch screen →Automatic edge feeding for material over turntable D=600 mm →Infeed lineal (400mm) →Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Separate glue roller temperature adjustment. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer periods and is still turned on). Optional: EVA/PUR glue pot with run out / cleaning function for quick change of glue. →Pneumatically operated cut-off knife from roll material up to 3 mm edge thickness →A group of two rollers exerting pressure on the edge band mechanically in order to achieve its adhesion onto the panel edge. The first roller is driven and the smaller second one is idle. Adjustment of the pressure rollers with mechanical SIKO display →High-frequency cut-off saw equipped with HF motor 0.21 kW, 12,000 rpm , 2 saw blades and high-precision linear guides ensure a clean and precise saw cut, with extraction hood. →High-frequency top and buttom milling station, 2 powerful 0.27 kW high-frequency motors with HM-WPL special millers; suitable for radius and bevel milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods for shavings with central extraction nozzle 2 x Ø 100 mm; height adjustment of the upper aggregate with the top roll pressure →Rotatable control panel with 7,0“ color touch screen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis →LED lights →Optional : Riepe non-stick spray station and Riepe cleaning spray station Additional finish aggregates : →Radius scraper unit : With a slight draw cut eventual radius milling traces are removed to provide a perfect finish. The fine adjustment is made by digital readouts →Glue scraper unit : Removes eventual glue rests with a slight draw cut from the glue joint of the work piece surface →Buffing unit : 2 motors 0.05 kW, 1,500 rpm provide a super-finish for ABS and PVC edge material 67641340eaae3

Condition: as good as new (ex-display), Year of construction: 2025, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), HF-cut-off saw station, HF-top and bottom milling unit, Corner rounding unit, chain feed, double roller top pressure, extendable work piece support and signal lamp for work piece sequence. For ABS, PVC, melamine and strong wood veneer roll material as well as fixed lengths from 0.4 –3.0 mm and of 8 – 50 mm work piece thickness. Speed: 7,0 m/min. • 2 spaces for finishing units • 10,0“ Colour Touch screen →Automatic edge feeding for material over turntable D=600 mm →Infeed lineal (400mm) →Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Separate glue roller temperature adjustment. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer periods and is still turned on). Optional: EVA/PUR glue pot with run out / cleaning function for quick change of glue. →Pneumatically operated cut-off knife from roll material up to 3 mm edge thickness →A group of two rollers exerting pressure on the edge band mechanically in order to achieve its adhesion onto the panel edge. The first roller is driven and the smaller second one is idle. Adjustment of the pressure rollers with mechanical SIKO display →High-frequency cut-off saw equipped with HF motor 0.21 kW, 12,000 rpm , 2 saw blades and high-precision linear guides ensure a clean and precise saw cut, with extraction hood. →High-frequency top and buttom milling station, 2 powerful 0.27 kW high-frequency motors with HM-WPL special millers; suitable for radius and bevel milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods for shavings with central extraction nozzle 2 x Ø 100 mm; height adjustment of the upper aggregate with the top roll pressure Bwjdpfod R U Adox Agzei →Corner rounding unit : automatic processing of corner edges up to 2 mm edge thickness. Equipped with one high frequency motor 0, 27 kW, selectable on operating panel →Rotatable control panel with 10,0“ color touch screen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis →LED lights →Optional : Riepe non-stick spray station and Riepe cleaning spray station Additional finish aggregates : →Radius scraper unit : With a slight draw cut eventual radius milling traces are removed to provide a perfect finish. The fine adjustment is made by digital readouts →Glue scraper unit : Removes eventual glue rests with a slight draw cut from the glue joint of the work piece surface →Buffing unit : 2 motors 0.05 kW, 1,500 rpm provide a super-finish for ABS and PVC ed 67641340e9686

Condition: used, Year of construction: 2015, functionality: fully functional, BIESSE Edge Banding Machine AKRON 1440-A Automatic single-sided edge banding machines for gluing and processing straight edges with roll material (melamine, PVC, ABS, veneer) and strip material (solid wood, laminate, sliced veneer, etc.) • NC control with touch display • Automatic start of aggregate motors • Direct selection for second pass • Operating data acquisition • Software-guided maintenance TECHNICAL DATA Workpiece thickness 10-60 mm Workpiece thickness with MFU aggregate (depending on profile) 10-35/60 mm Edge height 14-64 mm Edge thickness – roll material 0.4-3 mm Edge thickness – strip material (*) 0.4-10 (12) mm Workpiece overhang 25 mm Minimum panel length 140 mm Minimum width (at 140 mm length) 85 mm Minimum width (at 250 mm length) 50 mm Feed speed 12 m/min Dust extraction* 8x connection Ø100 mm Compressed air connection 7 bar Glue pot capacity 2 (approx.) kg * Depending on selected aggregates. - GLUING UNIT VC-511 Applies the hot-melt adhesive to the workpiece, feeds the edge to the workpiece, automatically cuts it from the roll, and presses it onto the workpiece, guaranteeing perfect positioning. - END TRIMMING UNIT IN-801 For trimming the front and rear edge overhangs with 0° to 15° angle. - 2-MOTOR MULTIFUNCTIONAL PROFILE MILLING UNIT AR02 E For corner rounding and profile milling of workpiece edges made of synthetic material up to a thickness of max. 3 mm. JOINTING CUTTER UNIT RT02 Joins the workpiece before glue application. Equipped with two 1.8 kW high-frequency motors at 12,000 rpm. SCRAPER UNIT RB02 For post-processing thick PVC/ABS edges. FLAT SCRAPER RC02 Aggregate for removing excess glue in the edge-to-panel area. Equipped with tracing rollers and a flat knife with engagement control. BUFFING UNIT SZ02 For cleaning and buffing the workpiece edge using fabric polishing discs. The unit automatically adapts to the workpiece thickness. ANTI-ADHESIVE SPRAY UNIT ADZ02 Precision application of anti-adhesive using injectors activated by numerical control. KIT PRO-GLUE The PRO-GLUE kit includes the following components: • TEKNO-GLUE system for optimal gluing through: - controlled pressure of the glue roller - automatic disengagement in case of feed stop Bwjdjxzb Iiepfx Agzsi - automatic ON/OFF of the glue unit • REVERSE system to switch the glue roller for co- or counter-rotation Electrical and mechanical preparation for the use of special glue pots for POLYURETHANE glue with machines equipped for EVA gluing. NC Axis for Fine Trimming Unit Kit for the automatic adjustment of tracing rollers and tools to match edge type and thickness. Adjustment takes place via the control system. Pair of multiprofile cutters for the fine trimming unit: 25-degree bevel, radius 2 mm + radius 1 mm plus straight profile for solid wood. NC Axis for Profile Milling Unit Kit for automatic adjustment of the tracer to match the edge thickness. Adjustment takes place via the control system. Function for processing only on the corners. NC Axis for Scraper Unit Kit for automatic adjustment of tracing rollers and tools to match edge type and thickness. Adjustment takes place via the control system.

Condition: good (used), Year of construction: 2020, machine/vehicle number: 020313L, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, pressure: 7 bar, Description: Solid steel construction for high machine stability. Workpiece feed via sliding transport chain with plastic plates. Upper pressure fitted with two rows of rubber-coated rollers. Manual adjustment of upper pressure with automatic positioning of the units according to the changed workpiece thickness. Mechanical digital display of panel thickness. PLC for on/off control of the motor and glue pot. Glue pot with standby function for temperature control. Start/stop function for all motors. End trimming unit for 3 mm edging rolls. Support tray for edging rolls with up to 800 mm diameter. Central dust extraction. Roller rail as workpiece support along the entire machine. Safety cover over all processing units. Control panel, including emergency stop and lockable main switch. Transformer for 24V auxiliary circuit. Jointing milling unit before the gluing section, for preparing the workpiece edge for adhesive application. With adjustable infeed fence. Maximum material removal 2 mm. 2 motors at 1.1 kW each, 12,000 rpm, max. material removal 2 mm, extraction port Ø 120 mm, incl. 2 WIDIA cutting tools. Gluing section for hot-melt adhesive with fast heating and adhesive application roller. System for temperature control and recycling of excess hot-melt adhesive. Power requirement 3.5 kW, capacity 1.5 kg, heating time approx. 15 min., depending on ambient temperature and adhesive. End trimming unit With 1 saw blade for trimming front and rear edge overhangs at a 90° angle, flush to the workpiece. Trimming for the front and rear overhangs can be controlled individually as needed. Motor: 0.35 kW. Saw blade speed: 12,000 rpm. Flush milling unit With 2 motors for milling a radius or chamfer on the top, bottom, and/or front edge. Vertical and horizontal motor adjustment on hardened steel guide rails and ball bearings. Three manually adjustable positions for different edge thicknesses. Motor not tiltable. Unit complete with WIDIA cutting tools 2/3 mm. 2 motors, 0.55 kW each, 12,000 rpm. Diamond cutting tools, 68mm Z6, R=2. Profile scraper knife Flat scraper knife Buffing unit Technical data: Edging strip thickness (manual feed) max: 5x45 mm Pre-milled panel thickness: 10 - 40 mm Unmilled panel thickness: 10 - 60 mm Max. height melamine edging: 65 mm Max. height ABS edging: thickness 0.4-2 mm = 65 mm; thickness 2-3 mm = 40 mm Max. edge overhang top/bottom: 2 mm each Bjdoxn Hzbspfx Agzswi Minimum workpiece width with roll material: 90 mm Minimum workpiece length with roll material: 160 mm Adhesive temperature: 190°-210° Feed speed: 8 m/min Inverter: 200 Hz Compressed air: 7 bar Extraction nozzle Ø: 2x 60 mm CE standard

Condition: used, Year of construction: 1989, - workpiece thickness max. (mm): 55 - workpiece width min. (mm): 80 - Profile depth max. (mm): 80 - inner radius min. (mm): 10 - Edge material thickness max. (mm): 3 - depending on radius and edge material Bsdpfek E Hrbjx Agzswi - milling motor: 0,5 kW, 27.000 rpm. - Electricity: 220 V - 1 Ph. - 50 Hz - Connection value (kW): 0,5 - Compressed air connection (bar): 6 - dimensions L x W x H (mm): 850 x 650 x 1430 - working table height (mm): 1000 - buffing unit: for processing thick PVC edges - Weight (kg): approx. 120

Condition: excellent (used), axle configuration: 2 axles, first registration: 07/2014, color: blue, Year of construction: 2014, Equipment: ABS, = Additional options and accessories = - Air suspension - Central lubrication system = Further information = General information Usable material: Concrete Axle configuration Rear axle 1: Steered Weights Unladen weight: 8,620 kg Functional Body brand: DE BUF ST2 High-pressure pump: Yes Water installation: Yes Water tank: 600 l Hoses: Yes Condition Technical condition: very good Visual condition: very good DAF CF 510 6X4 tractor unit with 2-axle semi-trailer and DE BUF 12 m3 concrete mixer EURO 6 L PACKAGE 510 HP DRIVE 6X4 AIR SUSPENSION WHEELBASE 320 CM CF SLEEPING CAB WITH AIR CONDITIONING AND REFRIGERATOR MANUAL TRANSMISSION ENGINE BRAKE 252923 KM DE BUF 2-AXLE TRAILER WITH 12 M3 CONCRETE MIXER 2-AXLE SAFE AXLES LAST AXLE STEERING DRUM VOLUME 12 M3 Bwjdpfov Um I Ejx Agzsi 2X WATER TANKS CAPACITY 625 L CAPACITY 60 L WATER HOSE CENTRAL LUBRICATION SYSTEM FOLLOW OUR INSTAGRAM, FACEBOOK, AND TIKTOK TO SEE OUR VIDEOS OF OUR TRUCKS/COMMERCIAL VEHICLES AND MACHINES FOR SALE. WE SPEAK GERMAN WE SPEAK ENGLISH WE SPEAK SPANISH

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, workpiece height (max.): 60 mm, workpiece width (max.): 60 mm, edge thickness (max.): 20 mm, The machine has been serviced and is in excellent condition. It is immediately ready for operation! TECHNICAL DETAILS - Edge thickness (glued): max. 20 mm - Maximum gluing height: 60 mm - Maximum roll material thickness: 3 mm - Piece width: min. 60 mm - Maximum feed rate: up to 25 m/min - Feed: continuous - Electric height adjustment: available - Pressure system: upper belt pressure - Preheating zone: available - Granulate glue system: with pre-fabricated container - Glue pot: interchangeable/variable - Spray unit: available - Pre-milling unit: available - Trimming unit: with 2 motors - Milling stations: flush/radial/chamfer, 1 available - Corner rounding unit: with 2 motors - Edge scraper: profile and planer - Buffing unit: available - Strip magazine: available - Units: synchronized units with NC axis/axes - Machine version: left hand side - Quick-change units: available Bjdpfxjx Tqgbe Agzswi MACHINE DETAILS - Remote control: PowerControl PC 22 - Weight: 5,000 kg - Machine length: 7,845 mm - Standards: CE requirements EQUIPMENT - Special equipment: with nesting - New chains - HOMAG feed device with 2 rollers - HOMAG A 20 glue unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG PN 10 profile pull scrape unit - HOMAG FA 11 finishing unit

Condition: new, Year of construction: 2025, machine/vehicle number: 2128, functionality: fully functional, workpiece height (max.): 65 mm, edge thickness (max.): 15 mm, feed rate X-axis: 18 m/min, warranty duration: 12 months, HOLZ-HER Edge Banding Machine SPRINT 1329 multi, year of manufacture 2025, ex works delivery - Motorized pressure bridge adjustment - iTronic – automatic pressure and glue quantity control - Motorized adjustment of the infeed fence 1350 mm - Automatic chain lubrication - Vertical bottom nesting shoes - Edge-Control PPC 322W control unit with 21.5" color touchscreen - ECO-MODE energy-saving mode - Pre-milling unit FG501 with 2 milling aggregates - Glue application system GlueJet GJ725 for EVA and PUR in cartridge and granule form, swiveling 90 degrees - Storage chute for 1.5 kg EVA granulate - Motorized pressure unit D501 - End trimming unit KA501 - Milling unit FR701 Mot6 multi Bwedpfox Nqn Rjx Agzei - Profile milling unit FF701 with 100% repeat accuracy - Scraping unit ZT502 Mot6 multi with motorized 6-axis adjustment - Surface scraper FK701 - Spray unit TR501 for infeed and outfeed - Spray unit GM501 after pressure unit for high-gloss edges - Buffing unit SW501 - Delivery time: immediately available

Condition: new, Year of construction: 2023, Demo machine Year of manufacture: 2023 Equipment and technical data: Base machine 1057 XL C with Beckhoff touch-screen control Extendable workpiece support 600 mm Long infeed fence 1252 mm Jointing milling unit with 2 motors DIA jointing cutter 70 x 64 x 30 mm Z2+2, left and right rotation Edgebanding unit 1903 fully automatic Glujet 301 adhesive application system Automatic reloading function Bedpfx Aow I Uytsgzjwi Magazine for 1.4 kg adhesive cartridges (holds 4 cartridges) GluJet collection container Pressure unit 1912-3 pneumatic Spray unit GM 201 after pressure unit End trimming unit 1918 pneumatic Extraction hoods for end trimming unit Combination milling unit FR201 with DIA cutters R=2 mm Profile trimming unit 1832 Shelf program Radius scraper ZK 301 Chip collection box Flat scraper FK 701 Spray unit front and rear TR201 Buffing unit 1940 Location: Solingen Availability: short notice

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Features and technical specifications: The machine has been completely overhauled: - New Glue Jet 301 adhesive system (top section 1 mm) - All units checked - All cutters sharpened - All knives replaced Feed speed: 10 - 18 m/min Workpiece length: min. 160 mm Workpiece width: min. 60 mm Workpiece thickness: 8 - 60 mm Bwsdpfxjwka Iis Agzsi Edge thickness: 0.4 - 8 mm Electrical for stepless feed: 400 V / 50 Hz, 2.2 kW Motorized pressure bridge adjustment Automatic chain lubrication PPC 315 control with 15" touchscreen ECO MODE energy saving mode Entry fence 1350 mm, motorized adjustment Jointing unit 1802: - 2 x 2.0 kW, 200 Hz, 12,000 rpm with 2 milling units for jointing the panel edge - Cutter, diamond Ø 70 x 64 x 30 mm, Z2, left-hand rotation for jointing unit - Cutter, diamond Ø 70 x 64 x 30 mm, Z2, right-hand rotation for jointing unit Edge feeder 1901 fully automatic Glue application station Glu Jet GJ301 automatic: - 2.3 kW; 50 Hz - Granulate hopper Pressure unit 1913 MOT End trimming unit 1918 (60 mm) pneumatic Multifunction milling unit 1826 MOT4 (2 x 0.65 kW): - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm left-hand rotation - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm right-hand rotation Profile milling unit 1833 MOT4: - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, left-hand rotation with CM technology - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, right-hand rotation with CM technology Scraper unit 1929 MOT2: - Carbide reversible plates for scraper holder R = 2.5 mm (2 pcs. required) Flat scraper 1964 Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1,400 rpm) Availability: short-term Location: 63934 Röllbach

Condition: good (used), Year of construction: 2007, working width: 800 mm, Polishing machine Manufacturer: Gottschild Model: HBS Year of manufacture: 2007 High-gloss polishing machine, previously used for polishing kitchen fronts and bathroom furniture parts Bwsdpfxsxzqrqj Agzsi Working width: 800 mm 1 polishing head, moves automatically right – left Polishing motor: 0.7 / 0.9 kW Working area is detected by sensors Conveyor belt width 820 x length 1950 mm Conveyor belt moves forward and backward One roller conveyor each in front of and behind the transport system, B 820 mm x L 1500 mm Connected load 2.2 kW / 400 V / 50 Hz Compressed air connection 6 bar

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, type of input current: three-phase, plate height: 50 mm, From business closure Type: IMA Compact 309 C Year of manufacture: 1992 For roll material and strips up to 9mm thickness - Gluing with hot-melt adhesive granulate - End trimming Bsdpfex Avcdex Agzowi - Sawing - Flush milling - Scraper knives and buffing Payment in cash upon collection. Private sale – no warranty.

Condition: used, Year of construction: 1997, - edge banding unit - Cross-cutting unit - Milling unit - Fine trimming unit - scraper Bodpfsd Inktox Agzjwi - buffing unit

Condition: used, - engine (hp): 1/1.9 - engine (rpm): 710/1420 - Motor (V): 380 Bwedpfx Ajm R Ilsgzoi - Motor (A): 3.7/3.8

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Edge Banding Machine Manufacturer: IMA Type: Quadromat 3512 U Bodjv T R Erjpfx Agzowi Year of 1999 Edge material: veneer rolls and strips, plastic, solid wood strips Edge height: 14-50 mm Edge thickness: 0.4-12 mm Speed: 18,000 rpm Cutting unit Milling units Profile scrapers Buffing unit Flat scrapers

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 12 mm, feed rate X-axis: 20 m/min, Equipment: CE marking, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. feed speed: 20 m/min Panel height min.: 8 mm Panel height max.: 60 mm Panel length min.: 150 mm Panel width min.: 65 mm Edge thickness min.: 0.3 mm Edge thickness max.: 12 mm Pre-cutting unit Unit: Corrections Edge pre-heating lamps Glue application system Glue pot for polyurethane adhesive Bjdexxaucopfx Agzjwi Pre-melter for polyurethane adhesive Edge pressure roller track Number of pressure rollers: 6 End trimming unit Model: 08.415 Number of motors: 2 Motor power: 0.66 kW Max. speed: 12,000 rpm Top/bottom trimming unit Model: 08.0555 Number of motors: 2 Motor power: 1 kW Multifunctional unit Model: SKF-L Number of motors: 4 Max. machining speed: 20 m/min Motor power: 0.18 + 0.400 kW Speed: 12,000 rpm Edge scraping unit Model: 08.519 Glue scraping unit Model: 08.521 Buffing unit Model: 08.617-2 Number of motors: 2 Motor power: 0.18 kW MACHINE DETAILS Number of operating units: 8 Adhesive system: PUR Control system: WINDOWS EQUIPMENT Programming software for the machine: ICOS open TS CE marking

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, workpiece height (max.): 40 mm, edge thickness (max.): 6 mm, feed rate X-axis: 11 m/min, rotational speed (max.): 12,000 rpm, Equipment: CE marking, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. feed speed: 11 m/min Maximum panel thickness: 40 mm Min. panel height: 8 mm Max. panel height: 40 mm Bwjdpfx Agoxw Ttvszoi Min. edge thickness: 0.3 mm Max. edge thickness: 6 mm Maximum spindle speed: 12,000 rpm MACHINE DETAILS Trimming unit Unit: Format cutting Unit: Trimming Automatic engagement by time Motor power: 2.2 kW Edge heating lamps Coil magazine Number of positions: 1 Gluing system Hot melt glue pot Edge pressure roller conveyor Number of pressure rollers: 3 Edge processing unit 1 Unit: End trimming Number of motors: 2 Automatic engagement by time Motor power: 0.18 kW Maximum speed: 12,000 rpm Edge processing unit 2 Unit: Top/bottom trimming Number of motors: 2 Motor power: 0.27 kW Maximum speed: 12,000 rpm Edge processing unit 3 Unit: Multifunction Number of motors: 1 Motor power: 0.35 kW Maximum speed: 12,000 rpm Edge processing unit 4 Unit: Scraper Edge processing unit 5 Unit: Buffing Number of motors: 2 Motor power: 0.1 kW Total installed power: 13 kW EQUIPMENT Control system: PC 16 CE marking

Condition: used, Used machine Equipment and technical specifications: Automatic edge feeder Cartridge glue system 4-roll printing unit Cross-cut saw unit Flush trimming unit Combination trimming unit: flush/bevel/radius Radius scraper Buffing unit Edge band thickness 0.3 - 20 mm (depending on unit) Edge band height max. 66 mm Edge band length min. 200 mm Feed rate 8/16 or 12/24 m/min With LIGMATECH workpiece return system The return line of this return system is located above the panel processing level. The workpieces move back to the operator on an inclined plane. Special features compared to the ZHR 0x models: Automatic detection and rotation of parts from transverse to longitudinal Automatic adjustment of the rotation speed to the workpiece length Minimum and maximum workpiece dimensions For longitudinal edge processing: 2200 x 1000 For transverse processing with subsequent rotation: 250 x 120/2200 x 800 Bjdpew Nad Hefx Agzswi Maximum workpiece thickness: 60 mm Location: Bavaria Availability: Short-term

Condition: new, Year of construction: 2024, New machine Bsdpfx Aow I U Rfegzewi Year of manufacture: 2024 Specifications and technical data: Base machine 1057 XL C with Beckhoff touch-screen control Extendable workpiece support 600 mm Extension for extendable outrigger Standard infeed fence 3 LED lights in the infeed area Jointing unit with two motors DIA jointing cutter 70 x 64 x 30 mm Z2+2, left and right rotation Edge feeding system 1903, fully automatic GluJet 301 adhesive application system Automatic reloading function Magazine for 1.4 kg adhesive cartridges (holds 4 cartridges) GluJet collection container Pressure unit 1912-3, pneumatic Spray device GM 201 after pressure unit End trimming unit 1918, pneumatic Extraction hoods for end trimming unit Combined trimming unit FR201 with DIA cutters R=2 mm Contour trimming unit 1832 Shelf program Radius scraper ZK 301 Chip collection box Flat scraper FK 701 Spray device front and rear TR201 Buffing unit 1940 Availability: short-term Location: Flörsheim

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Single-sided automatic edge banding machine with pre-milling unit, hot-melt adhesive application on straight workpieces (EVA/PUR glue pot with emptying function optional), HF cross-cut saw station, HF milling unit, corner copying unit, chain feed, double roller upper pressure, extendable workpiece support rail, signal lamp for workpiece tracking and integrated length control for contactless operation of processing functions. Suitable for ABS, PVC, melamine, and solid wood veneer edging coils, as well as fixed lengths from 0.4–3.0 / 6.0 mm and workpiece heights from 8–60 mm. Feed speed: 10.0 m/min; 8.0 m/min with corner copying. ● 3 free slots for finishing units ● 10" color touch screen. Machine length: 4030 mm Workpiece thickness: 8–60 mm Min. workpiece width: approx. 75 mm Min. workpiece length: approx. 120 mm (min. approx. 200 mm with corner copying) Edge thickness: 0.4–3.0 mm Pre-milling unit chip removal: 0–2.0 mm, stepless adjustment Total connected load: 7.5 kW – 400 V Feed speed: 10 m/min; 8 m/min Pneumatic connection: 6 bar Net weight: 1050 kg Options: Surcharge for radius scraper unit with air nozzle + extraction Surcharge for surface scraper unit + extraction Surcharge for buffing unit EVA/PUR glue pot with emptying function Bedpfjw I U Drex Agzjwi Surcharge for diamond tools, height = 65 mm for pre-milling unit Riepe spray system (anti-adhesive) at the pre-milling unit Riepe spray system (cleaning spray before buffing unit) Pipe system with 90° bend + manual slide valve, installed on machine, D=200 mm Availability: short-term Location: Hochheim

Condition: used, Year of construction: 2004, Used machine Bwedpfx Agovymdqezji Year of manufacture: 2004 Equipment and technical data: Edge feed for rolls and strips Joining milling unit with 2 milling heads Adhesive application system cartridge 3-roll printing unit Cross-cut saw unit Radius milling unit Radius scraper unit Corner copying unit Surface scraper Buffing unit Workpiece thickness min./max.: 6/50 mm Edging thickness: 0.4-15 mm Edging height max.: 55 mm Edging length strip min.: 350 mm Edging projection per side max.: 3 mm Workpiece width min.: 60 mm Workpiece length min.: 180 mm Feed speed: 12.5 m/min. Machine dimensions L x W x H 6480 x 1250 x 1690 mm Availability: short term Storage location: Flörsheim

Condition: used, Year of construction: 2002, functionality: fully functional, HOMAG Optimat KL79 A20/S2 (2002) – Full Configuration The edge banding line is in satisfactory working condition, fully operational and ready for production. Installed Units: • A20/S2 gluing station (edge thickness up to 20 mm) • Edge feed magazine • Front/rear end trimming units (two saw modules) • Top and bottom trimming units • Corner rounding units (two heads) • Profile scraper units (top/bottom) • Glue joint scraper • Buffing/polishing units • Pneumatic control and vacuum extraction system Technical Data (from manufacturer specifications): • Feed speed: 18–24 m/min • Edge thickness: 0.3–20 mm • Workpiece thickness: 12–60 mm • Minimum workpiece width: 55 mm (22 mm thickness) / 100 mm (60 mm thickness) • Machine length: 10,115 mm • Weight: ~6,200 kg • Power supply: 400 V, 50/60 Hz Bwjdeycg D Tepfx Agzei • Compressed air: 8 bar

Condition: used, 0 0,4 - 5,0 mm Workingpiece thickness from to 10 - 50 mm Total length 4000 mm Feed speed 11 m/min. Bimatic edge bander Type Prima 7.5 Two ----- Manufacturer's description: Technical data: Edge thickness: 0.4 - 5mm min. Panel width (without rounding unit): 80 mm min. Panel width (with rounding unit): 130 mm min. Panel length (without rounding unit): 100 mm min. Panel length (with rounding unit): 300 mm min. panel thickness: 10 mm max. panel thickness: 50 mm Feed speed: 11 m/min Suction nozzle: 3 x 150 mm Connection: 9 kW - 400 V / compressed air: 6 bar Aggregates: Jointing unit incl. AIGNER diamond jointing cutterheads, with DIA- interchangeable knife system Konstantin and controlled edge blow-out nozzle behind the 2nd jointing knife head. Joining cutterhead. Cross-cut saw unit with suction device incl. 2 pneumatically swivelling saw blades saw blades, adjustable and programmable from the control panel. MULTI radius trimming unit with 4 servomotors, adjustable and programmable from the control panel. programmable from the control panel. Including DIAMANT cutter with radius 1mm and radius 2mm. Rounding unit (copy trimming unit) with insert shelf function and pneumatic 2-position turret, adjustable and programmable from the control panel. The The complete unit can be pneumatically inserted and removed from the control panel. Including 1 quick-change motor with R=1mm and 1 quick-change motor with R=2mm MULTI radius scraper unit radius 1mm and radius 2mm with pneumatic 4-position turret. position turret. The unit can also be inserted and removed pneumatically Bwsdpowgwl Dsfx Agzei Including suction device with chip collection box for scraper chips. Flat scraper unit with 4-fold usable scraper knives. The complete The complete unit can be inserted and removed pneumatically. Remaining glue is are sucked off. Buffing unit with 2 diagonally arranged ORIGINAL Riepe cloth-sisal wheels for cleaning and buffing. lamellar wheels for cleaning and polishing General equipment: - 90° insertion aid - Telescopic extension with double support - Motorised adjustable infeed ruler (joint thickness adjustment) from the control panel adjustable and programmable - Motorised adjustable top pressure bar adjustable and programmable from the control panel programmable - Motorised adjustable pressure zone adjustable and programmable from the control panel programmable - 5 mm version: Quick-change motors with insert-flush milling cutter interchangeable with milling motors with radius milling cutter - High-gloss package: Roller scanning for radius milling unit, radius scraper unit and flat scraper unit scraper unit and flat scraper unit - Large viewing, noise and protection cabin for all units and for the glue pot - Interior lighting - Control panel with 15'' touchscreen and self-explanatory operator guidance - USB port for data backup and data transfer - Network connection for online support - Controlled pneumatic cylinder for workpiece distance control - Teflon-coated glue tray with quick-change system and energy-saving mode in standby mode in standby - Glue roller with screw conveyor for long and high workpieces (especially for PUR glue) - Additional quick-change glue tray - Pressure zone with 3 pressure rollers, whereby the 1st pressure roller is motorised is motorised - Heavy roller snipping shears for edges 54 x 3 mm - Original RIE...

Condition: used, Year of construction: 2006, IMA Novimat edge banding machine: Manufacturer: IMA Type: Novimat Concept/I/G/80/650/R3 Year of construction: 2006 Machine no.: 08113 Rated power: 41 kW Workpiece feed: Sliding chain Stop fence: Adjustable stop fence 700.080 Slide-in table: 63.152 Milling unit: 08.378 Glue level monitoring: Available Glue application unit: 04.0832 Gluing unit: 04.1570 PU premelter: 283.203 HK tool holder: For high-speed motors Snipping unit: 08.42 Trimming unit: 08.0555 Multiple processing unit: 08.348 Multiple profile scraper unit: 08.516 Flat scraper: 08.517 Copy corner buffing unit: 08.604 Buffing unit: 08.617-4 Safety devices: Light barriers, temperature controller, control terminal Additional equipment: Roller conveyor table in front Total machine length: Approx. 11 /16 m Suction device: Included Accessories: Edge magazines: 2 sliding magazines for gluing edges, each for 12 rolls, mobile Plasma edge heating (PLASMATREAT Düstec): 2 plasma devices Switch cabinet Panel return system (manufacturer: VENJAKOB): Components: 7 belt conveyor tables, belt width approx. 100 cm, different table lengths Round belt conveyor table Bwedpfx Aornkw Djgzoi Switch cabinet system 2 angular transfer tables Peripheral stations for edge processing line: Consisting of: Interface system Barcode scanning system

Condition: as good as new (ex-display), Year of construction: 2025, Compact and flexible in the smallest of spaces. At a length of only 2.13 m, workpieces are finished here. Equipped with a 1.1 KW high-frequency pre-milling unit and diamond-tipped spiral jointing cutter, Teflon-coated glue unit, pre-cut-off unit and HF multifunction milling unit, 2 free spaces for finishing units, such as a glue scraper unit and buffing unit. Easy operation via 3.5" color touch screen. ► Control via 3.5 inch color touch screen ► pre-milling unit with a 1.1 KW high-frequency motor with diamond-tipped spiral milling cutter in the counter-rotation ensures clean and Tear-free joining of the workpieces before the edge is banded ► Teflon-coated glue Pot with automatic stand-by function ► Automatic edge feeding with roller plate D = 600 mm for Edge material as roll goods as well as fixed lengths of 0.4 – 2.0 mm for ABS, PVC, or melamine edges ► Pressure station with 2 pressure rollers for optimal pressure of the Edge material. ► HF multifunction milling unit - suitable for radius and flush milling of the longitudinal edge, as well as for the front and rear edge of the workpiece, incl. vertical rounding of the edge ► 2 free spaces for finishing units such as glue scraper unit or buffing unit ► Workpiece chain feed with rubberized chain plates and Double Roller Upper Pressure Bwedorrzkljpfx Agzei ► Pressure bar with central adjustment and SIKO display ► Fixed workpiece support (optionally extendable workpiece support for large workpieces) ► 400 mm long infeed lineal with support ► LED lighting in the cabin (optional) ► Machining of workpieces with a thickness of 10 – 45 mm ► Feed speed 6.5 m/min ► Machine length 2130 mm 67641340f13ce