Used Boring for sale (4,711)

Condition: good (used), functionality: fully functional, Swing type row drilling machine, 19 spindles, pneumatic clamping Hedpex Rbklsfx Aa Esg

Condition: used, Year of construction: 1984, Used machine Year of manufacture: 1984 Universal dowel drilling machine with a swiveling drilling unit with fully automatic control Hsdpfx Ajkwg Rcoa Eeg with 2 safety pneumatic clamps Drilling gear motor 2.2 kW with 21 spindles Spindle spacing 32 mm with integrated oil damping Height adjustment 80 mm Drilling depth 80 mm Dimensions: 140x88x160 Weight 420 kg Availability: short notice Location: Flörsheim

Condition: good (used), Year of construction: 1977, workpiece weight 279 KG length ca. von Bett bis Lynette mm 189 € . max durchlass 369 mm Hedpfx Aorfd U Roa Ejg

Condition: used, Radial drilling machine CSEPEL type RFh 75 / 1500 Machine no. No. 13704 Year of construction 1985 Drilling capacity in steel Ø 75 mm Drilling capacity in cast iron Ø 90 mm Spindle holder MK 5 Nominal throat depth 1500 mm Largest projection of the spindle 1500 mm (to the column) Smallest projection of the spindle 440 mm (to the column) Distance spindle nose - clamping surface 370 - 1700 mm Cantilever height adjustment 950 mm Table size / clamping surface 1800 x 1100 mm Column diameter 450 mm Pinol stroke 380 mm Spindle speed 19-1900 rpm 21 steps Feed rate 0.047-2mm/rev. 12 steps Motor power 11 kW Mains connection 380 Volt, 50 Hz, 15 kW Hodpfx Aajlhwr Rj Esg - Clockwise/anticlockwise rotation of the drilling spindle via hand lever switch - Hydr. gear shift for spindle speed and feed speed - Hydro-mechanical central clamping - Motorized boom height adjustment - Without coolant device - Machine light - Operating instructions Space requirement: Length 2720 mm x width 1170 mm x height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons good condition

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 7/61, Manufacturing origin Swiss Voltage 380/50/3 Netweight abt. 760 kg Dimensions abt. 1250x1000x1700 mm TECHNICAL DATA WORK CAPACITY Travel X and Y 200x200 mm Vertical slide travel 250 mm Travel of drilling spindle 70 mm Max free passage between table and spindle nose 330 mm Free passage between column and centre of spindle 260 mm Max drilling capacity (steel) 10 mm Max reaming capacity 50 mm TABLE Usable surface 400x300 mm Admitted load 100 kg Travels X and Y through motors Number of T-slots 6 (longitudinal) DRILLING HEAD Spindel morse taper 0 Speed of spindle 150-3000 rpm Feed of drilling spindle 0,015 mm/t PRECISION Direct reading on divided drums 0,01 mm Direct reading on verniers 0,001 mm Guaranteed precision on displacement of slide-way 0,002 mm Hjdpfxjd Amgko Aa Eog MEASURE Measuring system direct, optical Elements of measure graduated rule, div.1mm Read-out projection screens Shifting of zero-point yes Direct read-out 0,001 mm Guaranteed positioning precision 0,002 mm Installed power 1,2 kW errors and omissions excepted data given without obligation Inventory Nr.2160006, machine equipped with : 1 turning table Ø 220 with optical measure 1 centering microscope with 3-points suspension, zoom 40x, lightening 1 centering device with dial comparator cap. 3 mm. MT0 1 centering point MT0 1 tracing tool with spring-mounted point MT0 1 center punch MT0 1 chuck for centering drills MT0 1 self clamping drill-chuck 0-5 mm., MT0 1 boring head type 0, cap. 0.5-30 mm., MT0 1 levelling foot with 2 round levelling supports

Condition: used, Year of construction: 1990, Dowel hole drilling unit: Pitch 16, 22, 25, 32 Drilling depth: 145 mm Slot length: 240 mm Height adjustment range: 135 mm Motor power: 1.5 kW Speed: 2800 rpm Hold-down device: manual Extraction port: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 300 kg Hsdpox I Aikofx Aa Esg

Condition: like new (used), Year of construction: 1987, Used Giddings and Lewis Model MC 50 Twin Pallet Horizontal Machining Centre with Live Spindle, 60 ATC and G&L 8000A Control System. Serial # 445-1052.Year of Manufacture: 1987 Machine Formerly Installed at Rolls Royce Plc In Derby UK. Immediately for Sale and now Located in Belgium where it can be Inspected. Spindle Diameter - 130 MM Spindle Taper - 50 ISO Spindle Travel (Z Axis) - 915 MM Spindle Speeds (4 Ranges) - 5 to 1500 RPM Main Motor - 30 HP Pallet Size - 1219 x 1245 MM Pallet Rotation Increments - 0.001 DEG (360,000 POSITIONS) Hedpsu Dahnjfx Aa Eog Pallet Changer Max Load - 5000KGS Pallet Max Load Without APC - 9000 KGS Longitudinal Travel (W) - 1700 MM Vertical Travel Of Head (Y) - 1500 MM Cross Travel (X) - 1800 MM Feed Rates Per Minute - 1.00MM/MIN TO RAPID RATE Rapid Traverse Rate Per Minute (X And Y) - 4500 MM / MIN Rapid Traverse Rate Per Minute (Z And W) - 3000 MM / MIN Auto Tool Changer - 60 POSITIONS Electrical Supply - 415V, 3PH, 50HZ FEATURES AND EQUIPMENT High Pressure (25 Bar) Through Spindle Coolant, High Tolerance Machine. Accurate Machine which was well Maintained and Regularly Calibrated by Manufacturer. Renishaw Probing. Length - 11679 MM Width - 6502 MM Height - 4423 MM Weight - 40329 KGS

Condition: excellent (used), Face and boring head WOHLHAUPTER type UPA 5 Hsdsikgaijpfx Aa Eeg with wooden case

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 1110013, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,500 mm, table load: 6,000 kg, spindle diameter: 110 mm, TECHNICAL DETAILS X-axis travel: 2,000 mm Y-axis travel: 1,600 mm Z-axis travel: 1,500 mm Drilling spindle diameter: 110 mm Clamping surface of the table: 1,250 x 1,600 mm Table load capacity: 6,000 kg MACHINE DETAILS Hodex I A D Ujpfx Aa Eeg Control: Heidenhain TNC 426M Note: The tools shown in the images are not part of the sale or included in the scope of delivery.

Condition: used, Price: On request Drilling machine, horizontal boring machine  Model: Conventional Hedownhi Aepfx Aa Eog Manufacturer: WMW Union Type: BFT 90/3-2 Including rotating table Including digital readout Including multiple belongings X-Z travel: 1600x1000 Y-travel (up-down): 1050mm W-travel: 710mm Spindlemotor: 11kW Spindle diameter: 90mm Spindlespeed: 8-1600 rpm Table: 1000x1120mm Machine-weight: 9000kg - Documentation available: No - CE certificate present: No - Serial number: 90/3-2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 480 mm, travel distance Y-axis: 175 mm, travel distance Z-axis: 280 mm, spindle speed (max.): 3,000 rpm, quill stroke: 50 mm, spindle mount: MK 2, overall weight: 100 kg, table length: 700 mm, table width: 180 mm, The machine has been inspected and is in good condition. Immediately available. Hedpfx Asx Ndkfoa Eog

Condition: used, Year of construction: 1994, Dowel hole drilling unit: spacing 16, 22, 25, 32 Drilling depth: 145 mm Slot length: 240 mm Height adjustment travel: 135 mm Hodpfex I Aiqox Aa Esg Motor power: 1.5 kW Speed: 2800 rpm Hold-down clamp: manual Machine length: 1280 mm Machine width: 960 mm Weight: 300 kg

Condition: used, Year of construction: 1997, Technical details: spindle diameter: 180 mm x-travel: 6.000 mm y-travel: 2.900 mm Hodperu Rfhjfx Aa Esg total power requirement: 95 kW weight of the machine ca.: 130 mit Zubehör t z-travel: 1.250 Ram mm w-axis: 1000 Spindel mm ram stroke: 1250 mm dimension of the ram: 450 x 450 mm bore spindle stroke: 1000 mm bore spindle turning speed range: 920 1/min powered rotary table: IOS 40 CNC 2 Achsen B u.V Rotary-table: 3000 x 3500 mm Rotary-table: CNC-IOS 40 NC mm stepless adjustable, relative to diameter: Index 4x 90° -360000 Winkel =0,001 Grad mm travel - cross: Längs 1230 mm table load of rotary table max.: 40 Tonnen clamping plate: 3 x 8000 x 2000 mm CNC Ram-Type Floor Boring and Milling machine, dismantled and stored The headstock sliding guides were recoated and scraped. *

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 4 kg, drill diameter: 150 mm, For sale is a new spindle tool for Ø68-150mm. Hjdpex Iwnuefx Aa Eeg Specifications: Spindle range – Ø: 68-150mm Fine boring head height: 71mm Holder: SK40 DIN 69871 (LBK6-115) Spindle length: 95mm plus fine boring head Total spindle depth: 166mm Indexable insert: TCMT110204 (3 pieces) The price includes inserts, fine boring head, and holder. Other spindle tools or holders (SK50, HSK63) available on request. Spindle tools for other diameters available on request.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 1,500 mm, table load: 10,000 kg, spindle diameter: 130 mm, spindle speed (max.): 2,500 rpm, table length: 1,500 mm, table width: 2,000 mm, travel distance W-axis: 800 mm, spindle stroke: 800 mm, quill diameter: 130 mm, Lazzati HB 130T horizontal boring machine with: - X-axis travel: 3500 mm - Y-axis travel (vertical): 1800 mm - Z-axis travel (column): 1500 mm - W-axis travel (quill): 800 mm - Quill diameter: 130 mm - Spindle speed: 2500 rpm - Table: 1500 x 2000 mm - Max. table load: 10 t Hedpsx Nc A Hofx Aa Ejg - Tool changer with 30 positions - Automatic head 2.5 x 2.5 - CNC Selca 3045 Free instalments over 12/24 months

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 620x560x1720 mm Hedpfx Ajv A Hm Rsa Eeg Weight 110 kg Total power requirement 0 kw

Condition: new, Year of construction: 2022, Drilling depth 170 mm Drilling width 250 Speed 2800 rpm HOLZKRAFT long hole drilling machine LLB 30 Entry level long hole drilling machine with single hand lever, eccentric clamp, dowel drilling device and drill head height adjustment with handwheel and numerical display for fast and precise working working table (LxW): 580 x 300 mm drilling width: 250 mm drilling depth (at 90°): 170 mm drill head height adjustment: 200 mm working table rotation range: not rotatable tool holder: WESCOTT drill chuck tool clamping range: Ø 0 - 20 mm spindle speed: 2.800 min-1 motor power: 2,2 kW | 400 V - 50 Hz suction nozzle: Ø 70 mm dimensions (LxWxH): 1500 x 920 x 1400 mm Weight (net): approx. 160 kg Hjdpfx Aaoih H A Re Eeg Including dowel drilling device, eccentric clamp, numerical display height adjustment, Wescott drill chuck 0-20 mm HOLZKRAFT LLB 30 slot drilling machine - entry-level machine for professional slot drilling - Made in EU Easy operation via one-hand lever for fast and precise work Drill head with hardened prism guides and bearing with ball contact system Drill head height adjustment with hand wheel and numerical display Manual eccentric clamp Sturdy cast steel construction Powerful three-phase motor Dowel device with grid position 16 | 22 | 27 | 32 mm Clamping stops allow easy and quick adjustment of the drill head run Scope of delivery HOLZKRAFT LLB 30 slot mortising machine Drill head height adjustment with hand wheel and numerical display Dowel drilling device with grid Eccentric clamp Wescott drill chuck 0 - 20 mm Instruction manual with exploded views, spare parts lists and CE- Declaration of Conformity Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 570x490x1720 mm Hodpov A Hm Djfx Aa Ejg Weight 90 kg Total power requirement 1 kw

Condition: new, Year of construction: 2024, Panhans long hole drilling machine type: 116/10 -Drilling depth max. 145 mm -Drilling length max. 240 mm -Height adjustment 135 mm -Suction nozzle ø 100 mm -ColorRAL 7035 light greyRAL 5000 violet blue -Net weight approx. 200 kg Solid German mechanical engineering Professional slot milling and precise dowel drilling Fixed table, smooth-running mobile drill motor Travel mechanism for greater mobility Cast iron table 700 x 380 mm thick-walled and highly ribbed Smooth-running cross support with adjustable ball guides for lateral and depth adjustment Height adjustment via handwheel and scale, drilling depth stop via scale, drilling length limit adjustable via side stops left and right Drill motor output 1.3 kW/1.8 hp with motor brake and practical tool tray Incl. emergency stop button High-precision three-jaw drill chuck, clamping range 5 - 20 mm Dowel drilling device for drilling holes in rows with 16, 22, 25 and 32 mm raster roller High-precision milled raster, fixed via spring-loaded raster bolt Plug-in frame stop with index bolt for the positions: center, left, right CE-compliant GS tested Incl. additional special accessories: - Single lever operation - Handwheel with dial gauge Location: ex stock 54634 Bitburg Hsdor Eli Tspfx Aa Esg - immediately available -

Condition: excellent (used), Year of construction: 1982, with 2 drilling beams Used, good condition Hsdpfx Aaov Trlmj Eeg Make Scheer Type DB 3 Year of construction 1982 Machine no. 73021 Number of spindles: 25 Number of drill beams: 2 Spindle spacing/grid: 32 mm Drilling from above Hydraulic feed brakes: 2 Linear stop: 1 approx. 2500 mm Working width: approx. 800 mm (768 mm) Drilling depth: approx. 100 mm stroke Drill chuck: M 10 Pendulum stops: 3 Clamps: 3 Drill programs: 4 Space required: approx. 1400 mm x 1300 mm x 1800 mm Weight: approx. 1000 kg Location: Arrives at the end of April at warehouse 54634 Bitburg - free on freight - Handed over in the current condition, as seen, without overhaul, without warranty or guarantee

Condition: like new (used), Year of construction: 2025, GANNOMAT "JUNIOR 323" FRAME DOWEL AND SLOT MORTISING MACHINE Complete in standard configuration as per price list 01/22/D with: - Precision collet chuck for ER 40 collets Ø 3–26 mm, including collets Ø 10 / 13 / 16 / 20 - Motor 1.5 kW, 2800 rpm - Positioning via digital counter - Pneumatic 2-level positioning adjustment (0–100 mm) - Max. drilling depth: 150 mm - Precision indexing rail with 12 mm pitch, featuring: - Center detent and lateral adjustment 320 mm - 2 pneumatic safety clamping cylinders - Complete fence system consisting of: • 1 center stop and 1 stop for oversized frames • 1 round stop bar approx. 850 mm long (can be mirrored from left to right) • 2 flip stops - Tiltable slot mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) Hodpfsxdttisx Aa Eog - Extraction hood Ø 80 mm, dust-tested - Central mitre stop 45° - Pair of auxiliary workpiece supports, pivotable (left and right) - Drill head holder - 3-spindle drilling head, 32 mm pitch (can be rotated 90°) - Chassis with 4 wheels for easy machine movement Availability: Short-term – immediately –

Condition: new, Year of construction: 2025, CNC-controlled drilling, gluing, and dowel insertion machine Complete in standard configuration with: - Support with linear guide consisting of: 1 pc. single-spindle horizontal drilling unit, motor 0.65 kW, stroke 70 mm Tool speed selectable via operator software (3000/5000/8000 rpm) 1 pc. blow-out, gluing, and dowel insertion station for dowels Ø 8 mm, dowel length 25–50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 700 mm, max. traversing speed 95 m/min - Z-axis manually adjustable via mechanical digital counter, position on support table 5–40 mm - Dowel insertion projection adjustable from 7–20 mm via mechanical digital counter, drilling depth 0–35 mm (with drill length TL 70 mm), automatically set with insertion projection - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with viscosity from 150 to 350 mPas - Glue quantity steplessly adjustable via operator software - Selector switch GLUE/WATER to flush glue system, each with: 1 stainless steel container for 7.5 kg glue and 7.5 l water - Indicator lamp for residual glue level in glue container - 1 pc. left side stop, 1 pc. right side stop (all removable) - 2 pcs. start buttons for individual operation with 1–2 workpieces - 2 pcs. pneumatic angled clamping cylinders 10° for workpiece thickness up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm - 1 pc. TCT controller with: Integrated industrial PC, incl. Beckhoff TwinCAT soft PLC, operating temperature range 0–50°C, 15" capacitive touchscreen TFT industrial display, operating system: WINDOWS 10 IoT LTSC (long term support channel) - Programming via menu-guided user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and process optimization, 2 working fields assignable with different programs, graphical workpiece display, parametric programming, zero-point shift, programmable work lists, plain text error diagnosis - Integrated options: - Electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle, art. no. 0470-0810 - 1 EASY CLEAN system, for automatic test glue shots before starting the drilling/gluing/dowel insertion program. E.C.S. for 1 pc. glue nozzle, art. no. 0471-Z010 - 1 single-spindle vertical drilling unit from ABOVE, 0.65 kW, (3000/5000/8000 rpm), position (Y) manually adjusted via mechanical digital counter Adjustable from 5–40 mm, drilling depth (Z) max. 30 mm (with drill length TL 57 mm) Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (incl. drilling depth compensation, e.g., for Häfele Minifix) Art. No. 0471-0830 Hsdpsw Sgm Hefx Aa Esg - 4 vertical angled clamping cylinders 10° with mount, additional, Art. no. 0470-0850 Available: short notice

Condition: new, Year of construction: 2024, Hoku Houfek long hole drilling machine LLB VD 20 R Top condition - Top machine - Motor 1,5/1,9 kW, Transverse displacement in Y-axis 250 mm, Longitudinal displacement X 340 mm, Vertical displacement z-axis 200 mm, 2 speeds 1,440 and 2,880 rpm. One-hand dowel drilling device with pitch 16 - 22 - 25 - 32 mm, 2 manual eccentric clamps, manual digital display for drill bit height, Table dimensions 700 x 400 mm, Drill chuck max. D = 20 mm, table rotatable +/- 45°, Hjdpfju Agzxjx Aa Eeg weight approx. 345 kg immediately ex stock 54634 Bitburg Subject to prior sale,

Year of construction: 1991, condition: excellent (used), Frommia long hole drilling machine Type: 770 drill holder : drill chuck with key max. drill diameter : 1 - 20 speeds : 2900 rpm max. drilling depth : 145 mm operation : two-hand operation of height adjustment : hand wheel reading of height adjustment : scale clamping cylinder actuation : hand eccentric types of construction : movable drilling head table width : 560 mm table depth : 300 mm working height or feed table height : 900 mm weight approx. : 220 kg dimension : 1200 x 900 x 1200 mm Motor power : 1.5 kW power supply ca. : 400V / 50 Hz / 4.8 A / 2,2 kW Accessories : some drills Hsdpfx Aaolc Eure Esg Location : ex stock 54634 Bitburg - immediately available - subject to prior sale

Condition: excellent (used), Year of construction: 1995, used, in good condition, low hours, top equipment Manufacturer: Panhans Model: 116H Year of manufacture: 1995 Machine No.: 640 GS wood dust tested 2-lever operation Drill chuck 20 mm Dowel boring device with 4 stops 45° continuously adjustable mitre fence Mobile 2 pneumatic workpiece clamps Hodpfexgu Uaex Aa Eog Pneumatic height adjustment with foot pedal Extraction connection D 100 mm Required space approx. 950 mm x 1000 mm x 1300 mm Weight approx. 200 kg Storage location: 54634 Bitburg, free loaded, unpacked Handover in current condition as inspected without guarantee or warranty