Used Boring for sale (4,950)

Condition: good (used), Year of construction: 1981, Ref. -No.: 10447 Manufacturer: SKODA Type: WD 200 Year of construction: 1981 Retrofit: 2010 Type of control: CNC-Steuerung Control: SIEMENS SINUMERIK 840D Storage location: Halberstadt Country of origin: Germany X-Travel: 9000 mm Y-Travel: 4000 mm Z-Travel: 1450 mm W-Axis: 2000 mm Bed width: 2000 mm Bed height: 550 mm Spindle Diameter: 200 mm Quill Stroke: 1600 mm Rotary Table (Lxw): 4000 x 4000 mm Table Load: 80000 kg Clamping Area: 3000 x 3000 mm Turning Speeds: 257 - 2570 RPM Spindle taper: 120 Automatic feeds: 342 mm / rev Spindle Turning Speed - Stepless: 1,5 - 630 RPM Max. Torque On The Boring Spindle: 20000 Nm Rapid Traverse: 16000 m / min Drive Capacity - Spindle Motor: 9,8 - 35,5 kW Total Power Requirement: 75 kW Bore Depth: 2000 mm Vertical headstock movement on the column: 3150 mm transverse movement of the stand on the bed: 4000 mm Lowest position of the spindle axis above the bed: 1100 mm Spindle speed when moving the quill forward: 1,6 - 300 max. rpm Drill feeds (spindle, quill) continuously variable in the range: 1,6 - 1600 mm / min Milling feeds (headstock vertical, column horizontal) infinitely variable: 1,6 - 1600 mm / min Machine length: 11350 mm Machine width: 5450 mm Machine Height: 7350 mm Weight Of The Machine Ca.: 65 t Further information: Threading: 22 metric threads, pitch range 0.5 - 12mm Gbjdszc Dyxopfx Afkjn 32 Whitworth threads, pitch range 28 - 1 (gears) Accessories: - console for tools - 1 set of operating tools - ejector and fastening wedges for spindle - lubricating press - 1 set of spare parts for electrical equipment - clamping base plate - setting stick with electrical equipment Machine can be inspected under power by appointment.

Condition: good (used), Year of construction: 2004, Ref. -No.: 10520 Manufacturer: TOS VARNSDORF Type: WHNQ 13 CNC Year of construction: 2004 Type of control: CNC-Steuerung Control: HEIDENHAIN TNC 430 Storage location: Halberstadt Country of origin: Czech Republic Machine-No.: 23XX X-Travel: 3500 mm Y-Travel: 2500 mm Z-Travel: 1250 mm W-Axis: 800 mm Table Load: 12.500 kg Gbodpfx Afjw Nmw Heksn Clamping Area: 1800 x 2500 mm Tool Taper: SK 50 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 3.000 RPM Max. Torque: 3323 Nm Rapid Travel X/Y/Z: 10000 mm / min Drive Capacity - Spindle Motor: 37 / 1500 kW Weight Of The Machine Ca.: 40 t Further information: - Tools + accessories - Angle head - Angle up to 2.5m - Chip conveyor - 3D measuring probe - Clamping device Machine is still in production and can be inspected under power by arrangement.

Condition: good (used), Mikron WF 41C CNC Universal Milling and Boring Machine Professional, extremely robust MIKRON WF 41C CNC universal milling and boring machine. Thanks to its sturdy construction, the machine is ideally suited for workshops, prototype manufacturing, maintenance, or demanding toolmaking applications. The machine is equipped with the proven HEIDENHAIN TNC 155 contouring control. It is extremely easy to program directly at the machine thanks to plain-language conversational guidance; it supports graphic simulations and allows for the easy loading of external CNC programs via the serial interface (ideal for CAD/CAM applications). Technical Data Overview CNC Control Model: HEIDENHAIN TNC 155 Operating modes: Manual operation (like digital readout), positioning with manual input, single block, block sequence, program test (graphic simulation) Interface: V.24 / RS-232-C for data transfer Feed Drives & Travel Ranges X-axis travel (table longitudinal, automatic): 630 mm Y-axis travel (spindle slide transverse, automatic): 500 mm Z-axis travel (table vertical, automatic): 460 mm Feed rate: Infinitely variable from 1 – 3000 mm/min in all 3 axes Rapid traverse speed: X- and Y-axis: 6000 mm/min | Z-axis: 4000 mm/min Max. vertical installation height: 559 mm (between vertical milling head and angle table) Milling spindle drive Spindle speeds: 21 gear stages Speed ​​range: 31.5 – 3150 rpm Spindle motor power: 6.0 / 8.0 kW Tool holder: ISO 40 / M16 with pull stud groove (SK 40 DIN 2080) Quill travel (vertical): 90 mm Table geometry & workpiece capacity Angle table clamping surface: 500 x 1000 mm T-slots: 7 (spacing: 63 mm, width: 14-H7 mm) Vertical clamping surface: 397 x 550 mm (with 4 x 4 M16 threaded holes, 90 mm spacing) Max. recommended workpiece weight: 500 kg Electrics & cooling Electrical connected load: 13.5 kW Coolant tank volume: approx. 100 liters Dimensions & weights Machine dimensions (machine only): 1745 mm (L) x 1501 mm (W) x 2124 mm (H) Max. operating footprint (incl. control arm): 2930 mm (L) x 2115 mm (W) x 2125 mm (H) Machine weight (net): 3100 kg (incl. vertical milling head and angle table) Gbjdjzcqf Ispfx Afkon "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—new and used—in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 2002, functionality: fully functional, Stationary drilling machine for furniture components, for drilling rows of holes and hardware, with a drilling head for rows of holes and a drilling head for hardware, specifically for HETTICH hardware. - Drilling unit adjustable in depth This allows, for example, 2 rows of holes to be drilled in parallel without having to move the workpiece. - Drilling motor 1.1 kW, 2,820 rpm - Pneumatic feed via foot valve, stroke 90 mm - Stop system with folding stops Gbedozbh Htjpfx Afksn - Pneumatic workpiece clamping - Quick-change system for drilling heads Existing drilling heads: - BKF-15/32 drilling head for rows of holes with 15 spindles, pitch 32 mm - 3-spindle drilling head for Hettich hardware Connection values: 400 V, 50 Hz, 3-phase

Year of construction: 1986, condition: excellent (used), functionality: fully functional, Technical details spindle diameter 135 mm x-travel 1000 mm y-travel 700 mm z-travel 300 mm cross rail adjustment - vertical 780 mm distance between table/spindle 1000 mm table surface area 1100 x 842 mm distance between columns 1100 mm table load 1500 kg tool taper SK 45 spindle turning speed range 2400 U/min spindle drive 5,9 kW feed range 1 - 6000 mm/min weight of the machine ca. 10,6 t Additional information Gbjdpfezabqvex Afkjn Retrofit / overhauling in May 2005 (with geometric measurement): - New Heidenhain iTNC-530 control - New electronics - New Siemens servomotors - Heidenhain glass scales - Revision of drilling spindle unit (total costs 118,436.00 EUR) Equipment: Infrared measuring probe m&h 38.10-MINI Electron. Handwheel Various tool holders Transport dimensions: - Machine (LxWxH) 3500 x 2600 x 2750 mm - Control cabinet (LxWxH) 2300 x 600 x 2300 mm - Hydraulic (LxWxH) 800 x 600 x 1000 mm

Condition: used, Year of construction: 1973, spindle diameter 140 mm x-travel 2000 mm y-travel 2000 mm z-axis 1500 mm spindle stroke - max. 800 mm spindle taper ISO 50 table surface area 1800 x 1500 mm table load 15000 kg turning speed range 2,3 - 810 U/min total power requirement ca. 30 kW weight of the machine ca. 31000 kg Gedjy Umc Uepfx Afkobn dimensions of the machine ca. 7300 x 5600 x 4000 mm Equipment: - Faceplate with NC facing slide and NC rotary table - Heidenhain digital readout - Various tool holders - Various clamping devices

Condition: used, Year of construction: 2007, functionality: fully functional, DEFUM WFS 130N with Heidenhain 530 control. Gedpfx Aezb U Nusfkobn Year of manufacture: 2007 Tool holder: SK 50 Spindle speed range: 10-2500 rpm Drive power: 32 kW X-axis: 3000 mm Y-axis: 2500 mm Z-axis: 1500 mm W-axis: 900 mm Table clamping surface: 1600x1800 mm Max. table load: 12000 kg Machine weight: approx. 23000 kg

Condition: not inspected (used), Year of construction: 2013, Bore diameter , mm Number of heads horizontal , St. Number of heads vertical , St. 2 pcs. Götzinger drilling and milling centers ----- For sale on behalf of a customer! 2 identical machines: One machine for "left" parts and one for "right" parts. The machines can also be used individually. The machines were controlled via window manufacturing software, but can also be operated via the machine software. Both machines are equipped identically: - Left and right drilling units for front-end drilling. - 3 units for drilling and milling for longitudinal machining. - Parts are loaded once, and the unit carrier then moves for the various machining operations. Installation length per machine approx. 6 m. Individual sale possible: Price per machine 10,000 Euro See the enclosed PDFs for more information. Gbsdpfxov N N Spo Afksn

Condition: ready for operation (used), Number of boring motors 1 St. boring of corner bearing 1=yes, 0=no 1 ja_yes boring of olive 1=yes, 0=no 1 ja_yes 1 HESS fitting drilling station for corner bearings and olives This Hess drilling station for tradesmen offers a lot of drilling technology for little money. A complete station for drilling corner bearings and olives with all the important features, such as 2 clamping cylinders, drilling depth sensing, effective suction, stop systems for corner bearing and olive drilling, drilling head with interchangeable chuck, adjustable drilling feed speed, automatic program sequence. This means technology for perfect work: just one machine with just one drilling unit and just one drilling head for 2 work steps. The system: - Base frame as a support wall for frames and sashes up to 100 mm - Drilling unit positioned in the middle, height manually adjustable via threaded spindle - Drill hole position and depth set to the specified fitting type, can be adjusted via a stop system when changing types - Drilling feed speed can be variably regulated via throttle valve - Direct extraction - Electro-pneumatic control system with automatic Program sequence for - Fixing workpieces - Drill motor on - Drilling unit forwards - Drilling - Drilling unit backwards - Drill motor off - Releasing workpiece fixation - Fixed stop systems Basic equipment / Technical data: Sturdy base frame as a support wall, precise support made of abrasion-resistant and dimensionally stable plastic, for frames and sashes up to 100 mm thick, Corner bearing and olive drilling in one machine and in one drilling unit, simple and convenient, vertical work, easy handling, no templates, minimal time required for the safe workpiece positioning, guarantee for exact and precise drilling, 2 clamping cylinders for immovable fixation of sash or frame, adjustable to different wood thicknesses, side stop in the rebate for the corner bearings, ergonomically arranged stop system for olive drilling with 14 swiveling stops and additional color markings, fixed stop system for drill hole height determination when changing from corner bearing to olive, automatic drilling depth sensing for corner bearing and olive, drill unit with quick-change chuck for the various tools for corner bearing and olive, tool change in "no time", automatic program sequence, clean work thanks to effective suction, small space requirement and mobile thanks to steering/brake rollers. Electrical equipment in accordance with VDE. Electrical connection: 0.55 KW, 400 V, 50 Hz. Pneumatic connection: R 3/8", 4 - 8 bar Extraction connection nozzle: 1 x 100 mm diameter Extraction speed: 25 m/sec. Space required: Width: 2600 mm Height: 1250 mm Depth: 800 mm Support height: 300 mm Paint finish: RAL 7030 stone grey with RAL 1018 zinc yellow Gbodpsvu Hgzsfx Afkon 1 drill set with 1 drill 25 mm and 2 drills 10 mm plus 1 drill 34 mm diameter (technical data according to manufacturer - no guarantee!)

Condition: new, Bore diameter variabel mm Number of heads horizontal 3 St. Number of heads vertical 4 St. weight 1500 kg Dimensions (L/W/H) 4800x1600x2400 mm Width mit Auflage 2300 mm Götzinger Power Drill Type BF 297 With the Götzinger PowerDrill you can, depending on the type and design: Griffoliven drill on the loose frame part or for finished wings, with multi-spindle drilling head, quick-change, also for milling of the lock case for WK 2 or intermediate gear Ecklager drill on loose frame part, with Mehrspindelbohrkopf, quick-change, corner-oriented over stop or custom made (tilt window) Drill vertically from above for fitting, pre-drill for clip on loose frame part Milling vertically from above for pushers, profile cylinders, 3-D hinges Horizontal drilling with 2 drilling units, different drilling diameters, Dowel drill front and long side, plywood / fighter, sprouts, Corner connection, front door etc. Milling horizontally for lock case / fitting etc. Gbsdpfx Afod Ih Hqoksn machine description Base frame in stable welded construction, linear guide for the X-axis Table top 3,000 x 200 mm 6 clamping cylinder pneumatic with auto. Ausweichhub 2 side stops for machining on the front side, manually swiveling in and out 2 longitudinal stops can be manually swiveled in and out Travel: X-axis - 3,000 mm working length Y-axis - 120 mm Z-axis - 105 mm Aggregate: 1 drilling unit (unit 1) vertically from above, drill motor 1,1 KW Speed ??1,500 - 12,000 rpm, 1 spindle, collet holder ER 20 1 Bohraggreagt (unit 2) vertically from above, drill motor 1,1 KW Speed ??3,000 rpm, with drill head quick change device 1 boring head BKF 3, olives, quick-change 1 boring head BKF 3/2 corner bearing, quick-change 1 milling unit (Agg.3) vertically from above, milling motor 2 KW, 1,500 - 16,000 rpm, collet holder ER 25 2 horizontal drilling units (Agg.4 and 5) 1.0 KW, 1.500 - 12.000 U / min, Collet holder ER 20 1 milling unit horizontal (Agg.3) 2.0 KW, 1.500 - 16.000U / min, Collet holder ER 20 Electro-pneumatic control with 3-axis control X, Y, Z NC positioning controller make B + R input via TFT display 10 " Machine complete with 1 set of drilling tools dm 6, 8, 10 and 12, 2 roughing carbide cutters HM dm 16, CE compliant, ready for connection Suction connection: 1 x dm 120 Power connection: 1 x 400 V, 16 amps Air connection: 1 x LW 9 mm OPTION: Longitudinal stops right / left with NC axis high / low programmatically, thus dimension input by folding / light measure possible, Dimension: LxWxH = 4.80 x 1.60 x 2.40 m - weight machine 1,500 kg (technical data according to manufacturer - without guarantee!)

Condition: good (used), Year of construction: 2003, feed length X-axis: 3,500 mm, feed length Y-axis: 2,500 mm, feed length Z-axis: 1,250 mm, total length: 7,200 mm, total height: 5,300 mm, table width: 1,800 mm, total width: 6,800 mm, table length: 2,200 mm, workpiece weight (max.): 12,000 kg, Table type boring mill TOS VARNSDORF - WHN13CNC MACH-ID 9629 Make: TOS VARNSDORF Type: WHN13CNC Control: HeidenHain TNC430 Year: 2003 1e owner machine Godpfx Ajy T E Itjfkjbn ca 16.000 Spil hours Chip conveyor Under power  X - Travel: 3500mm Y - Travel: 2500mm Z - Travel: 1250mm W - Travel: 800mm Table Length: 2200mm Table Width: 1800mm Table load: 12000 Speeds / ranges: 2800Rpm Power: 37kW Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Feed rate W-Axis: 10000mm/min. Number of controlled axis:5 Length: 7200mm Width: 6800mm Height: 5300mm Weight: 36850kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1997, Technical details: spindle diameter: 180 mm x-travel: 6.000 mm y-travel: 2.900 mm total power requirement: 95 kW weight of the machine ca.: 130 mit Zubehör t z-travel: 1.250 Ram mm w-axis: 1000 Spindel mm ram stroke: 1250 mm dimension of the ram: 450 x 450 mm bore spindle stroke: 1000 mm bore spindle turning speed range: 920 1/min powered rotary table: IOS 40 CNC 2 Achsen B u.V Rotary-table: 3000 x 3500 mm Rotary-table: CNC-IOS 40 NC mm stepless adjustable, relative to diameter: Index 4x 90° -360000 Winkel =0,001 Grad mm travel - cross: Längs 1230 mm table load of rotary table max.: 40 Tonnen clamping plate: 3 x 8000 x 2000 mm CNC Ram-Type Floor Boring and Milling machine, dismantled and stored Gbsdpfxsru Rfhe Afksn The headstock sliding guides were recoated and scraped. *

Condition: used, Year of construction: 2002, Used machine Gbedpfjw Naccjx Afkjn Year of construction 2002 table size 580 x 280 mm Drilling table height 800 mm Drilling depth 150 mm Drilling length 225 mm with Wescott drill chuck 0-20 mm height adjustment 120 mm Swivel range drilling unit 2 x 45 ° with 2 eccentric clamps with one-hand operation with dowel drilling device with dial gauge in handwheel with digital display with 2 speeds 1400 and 2800 rpm with drive unit LxWxH 850x1000x1050 mm Weight approx. 240 kg Availability: short term Storage location: Flörsheim

Condition: used, CNC Gantry-Type Boring and Milling Machine ANAYAK Type HVM-3800-P Bed type milling machine, structure similar to a plate-type boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 ("Refurbished 2025") The machine will be completely workshop overhauled in 2025 and can then be inspected in storage at 37235 Hessisch Lichtenau. Travel distances: X: 3,200 mm, Y: 1,200 mm, Z: 1,500 mm Table size: 3,800 x 1,200 mm T-slots: 8 pieces, 22 mm, spacing 130 mm Table load: max. 25 tons (stationary table – virtually unlimited load capacity) Spindle taper: ISO 50 (DIN69871-A) (drawbar: DIN 69872-B) Spindle speed: 60 – 4,000 rpm, stepless Feed rate: up to 10,000 mm/min, stepless Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Electrical connection: 400 Volt, 50 Hz, 50 kVA - Automatic tool changer for 30 tools - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal milling head fully automatic swiveling in two 45° planes – B+C axis - HEIDENHAIN iTNC 530 control, with electronic handwheel - Prepared for wireless touch probe (probe and receiver not included) - Additional HF-spindle, 18,000 rpm – for attachment - Free-standing control cabinet - Chip conveyor positioned between the gantry bed and the machine table - 32,078 operating hours recorded - Coolant system - Free-standing hydraulic unit - Operating manual with circuit diagrams Installation area (L x W): approx. 1,000 x 700 cm Gjdpexcgtgsfx Afkobn Installation height: approx. 410 cm Weight (total): approx. 33 tons Good condition

Condition: used, Year of construction: 2006, drilling depth: 28 mm, Used Koch Drilling and Dowel Insertion Machine, Sprint-PTP-3 Technical data of the machine: Workpiece dimensions: Length Y: 110-800mm Width X: 20-1200mm Thickness Z: 14-60mm Material: Chipboard/MDF/Softwood Machine with 2 working areas. 2 workpieces with a maximum width of 600mm each can be loaded independently of each other. Working height 900mm - with horizontal drilling station - with glue application and dowel insertion station - with 1 oscillating conveyor - Drilling distance vertically Z above the support table: 35 mm - 1 stop rail on the left and right - Mechanical digital displays for height adjustment - Work cycle triggered by a manual button Koch Numeric with 1 NC axis (X) Positioning control with PC (Windows XP Professional PC) Gedpjzbunksfx Afkebn Including widened machine frame for a maximum workpiece width of 1200mm 2 additional workpiece clamping cylinders Center stop for 4 working areas (removable for wide workpieces) Horizontal drilling station with 1 drilling spindle: Max. drilling depth 28mm Drill chuck Ø10mm Total drill length 70mm Drill speed 7200 rpm With dowel hole blow-out Glue application and dowel insertion station Dowel diameter: 8mm Dowel length 30mm Dowel projection 7-14 mm Set to 11mm Tolerance for wood dowels: --- Dowel length +/- 1 mm --- Dowel diameter +0.1/-0.2 mm With electronic glue monitoring (ELC) A monitoring device is installed before the glue valve, which measures the glue flow during each work cycle. If no glue is injected at a valve, the machine interrupts its work cycle and displays the corresponding glue valve in the control cabinet. Electrical values: Connection value: 400V, 50 Hz, 3 phases Voltage fluctuations max +6% to 10% Air connection 1 x R 1/2" internal thread 7 bar Extraction air velocity: approx. 30m/sec

Condition: excellent (used), power: 16,000 kW (21,753.92 HP), fuel type: diesel, overall weight: 14,000 kg, Year of construction: 1998, operating hours: 622 h, output voltage: 400 V, nominal power: 1,600 kW (2,175.39 HP), nominal power (apparent): 2,000 kVA, output frequency: 50 Hz, rotational speed (max.): 1,500 rpm, We have a used emergency power generator, or grid replacement system, for sale with the following technical specifications: Condition: Used, fully functional, inspected Engine: MTU 16V396 Generator: AvK Rated power: 2000 kVA / 1600 kW Speed: 1500 rpm Frequency: 50 Hz Rated voltage: 231/400 V Operating hours: approx. 618 hours (emergency power operation) Year of manufacture: 1998 Open design - Includes batteries - Includes diesel tank Gbedpoug I U Eefx Afkjn - Includes circuit breaker - Includes control system (island operation). - Optionally, against an additional charge, the control system can also be synchronized for grid-parallel operation with load distribution and emergency power operation. Seamless integration into your energy infrastructure. Optionally, installation in a 30 or 40 ft container is possible, against an additional charge, as a compact, ready-to-use unit. Dimensions: 500x180x230 cm (L x W x H) Weight: 12,500 kg The emergency power generator will be delivered in a ready-to-use condition, including a logged load test of 60 minutes. Delivery, installation and commissioning are possible for an additional charge. Price: 80,000

Condition: ready for operation (used), Available immediately, ex works: Scharmann boring table Year of manufacture approx. 1985 Table size 1800 x 1600 mm Table load capacity 20 tons Travel distance (X-axis) 1250 mm Electric drive 4 kW Weight 9 tons Gbedpfjzcwd Dox Afken Price: EUR 8,500.00 plus VAT, ex works.

Condition: used, Year of construction: 1990, spindle diameter 150 mm x-travel 4000 mm y-travel 3000 mm Gbedpfsyqtf Tex Afksn z-travel 1000 mm w-travel 1500 mm Table area 2000x2000 mm Table load 30 t Feed 3-3500 mm/min Rapid movement 5000 mm/min transmission ratio 2 spindle power 37 kW voltage 380 V frequency 50 Hz Control Heidenhain type ITNC mm The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1992, spindle diameter 100 mm x-travel 3500 mm y-travel 2500 mm total power requirement 44 kW weight of the machine ca. 38 t Gsdjy U N I Topfx Afkobn dimensions of the machine ca. 8,1 x 6,2 x 4,5 m

Condition: used, Year of construction: 1995, spindle diameter 120 mm Gjdpfx Ajy U N I Hefkebn x-travel 1500 mm y-travel 1000 mm Control Fanuc

Year of construction: 2001, condition: excellent (used), machine/vehicle number: PB 04 02.01/1070, Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Gedpfxeidqtlj Afksbn

Condition: excellent (used), machine/vehicle number: 70218, Equipment / Additional information: Various tools Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Gedpfx Afepithaokebn

Condition: excellent (used), machine/vehicle number: 85039, Model: 371 Equipment / Additional information: Ø max. 15 mm Gedpfx Aoth U E Eofkebn Distance between drills: 60-120 mm

Year of construction: 1986, condition: excellent (used), machine/vehicle number: 1767, Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Gbsdpfopitfxex Afksn

Condition: defective spare-parts repository (used), Year of construction: 1980, Machine: Type: BFT 90/3at Manufacturer: UNION Year of manufacture: 1980 Control: NC control, HEIDENHAIN TNC 131 Electrical cabinet: by Reliance Machine group: Table-type boring mill Customs tariff number: 84592100 Technical data: Spindle diameter: 102 mm X-axis travel: 1000 mm Y-axis travel: 1250 mm Z-axis travel: 1600 mm Tool holder: ISO 50 DIN 2048 Spindle stroke: 710 mm Spindle speeds: 8 – 1600 rpm Table size: 1000 x 1120 mm Gbjdpfjygarlex Afken Table rotation: 360° Max. workpiece weight: 2,500 kg Feed ranges: 0.8 – 2,000 mm/min Rapid traverse: 3.15 m/min Feed force: 16,000 N Spindle motor: 11 kW Total power requirement: 23 kW Machine weight: approx. 9.3 t Space requirement: approx. 5.3 x 3.8 x 3.14 m Special features and notes: Electronic issue: There is an electronic problem (control board needs to be replaced). The price has been adjusted accordingly (€10,500.00) to account for the necessary repair work. The HEIDENHAIN contouring control and the mechanical components of the machine are in good condition. Inspection is possible by appointment to assess the machine's condition and the extent of the electronic issue. For further technical details, please refer to the attached data sheet. Important information: All information is subject to confirmation, prior sale, errors, and availability. Technical data and all information provided are non-binding and only for orientation purposes. Contact: If interested or to arrange a viewing, please send a message or make an appointment. Disclaimer: The item is sold as described. Returns, warranty, and guarantee are excluded. The buyer agrees that the item is purchased in its current condition, "as seen," with no right of return. No liability is assumed for the accuracy of the information provided in the text or photos. By purchasing this item, you agree to the above-mentioned terms and conditions.