Used Boring System 23 for sale (24,865)

Condition: good (used), Year of construction: 1995, functionality: fully functional, Control: SIEMENS 840D Solution Line (electrical overhaul 2017) x-travel: 7.000 mm y-travel: 2.100 mm z-travel: 1.500 mm z-travel vertical: 1.200 mm Universal milling head (orthogonal design) Swivel range of milling head holder: 340 °Grad Swivel range of milling head: 180 °Grad Hjdpfx Aajxphm Ujcsnu Mounting cone for tools with steep taper: SK50 spindle truning speed range: 22 - 2.240 U/min Feed rate x,y and z-axis: 2 - 12.000 mm/min Rapid traverse rate x,y, and z-axis: 12.000 mm/min Drive power 100% ED / 60 % ED: 31,5 / 39 kW Clamping plate dimensions of clamping plate: 6.000 x 1.500 x 300 mm Number of T-slots: 6 T-slot distance: 250 mm max. load: 10 t/m² Equipped with: NC dividing head PEISELER AWU 650 with vertical faceplate, diameter 650 mm automatic universal milling head, orthogonal, (Completely refurbished 2017, rarely used since then) SIEMENS electronic handwheel 3 support tables various prism support blocks MAYFRAN hinged belt conveyor Coolant system with paper belt filter Work platform moving in the X direction, protective cover with viewing window The machine is in exceptionally good condition and can be viewed while under power. In 2017, a new SIEMENS 840D Solution line control system was installed, all drive motors and the control cabinet were replaced at the same time.

Condition: good (used), Year of construction: 1985, functionality: fully functional, Retrofit / overhauling in May 2005 (with geometric measurement): - New Heidenhain iTNC-530 control - New electronics - New Siemens servomotors - Heidenhain glass scales - Revision of drilling spindle unit (total costs 118,436.00 EUR) Technical details spindle diameter 135 mm x-travel 1000 mm y-travel 700 mm z-travel 300 mm cross rail adjustment - vertical 780 mm distance between table/spindle 1000 mm table surface area 1100 x 842 mm distance between columns 1100 mm table load 1500 kg tool taper SK 45 spindle turning speed range 2400 rpm spindle drive 5,9 kW feed range 1 - 6000 mm/min weight of the machine ca. 10,6 t Equipment: Infrared measuring probe m&h 38.10-MINI Electron. Handwheel Various tool holders Transport dimensions: - Machine (LxWxH) 3500 x 2600 x 2750 mm - Control cabinet (LxWxH) 2300 x 600 x 2300 mm - Hydraulic (LxWxH) 800 x 600 x 1000 mm Hodpfsw Hxw Iex Aaconu

Condition: used, diameter 85 mm tool adaptor SK 50 bore of diameter max. 130 mm adjustment of the slide 40 mm tool tapers in the slides 20 mm weight ca. 3 kg Hnsdpfxev Dx Aao Aaceu Machine dealer with own stock of 1600 m².

Condition: used, Weinig Hydromat 23 planer and moulder for four-sided planing and profiling of wood and beams with high feed rates and four driven rollers in the table. spindles: 8 working width: 230 mm working height: 160 mm spindle 1: Bottom / 11 kW / 50 mm spindle 2: Right / 11 kW / 50 mm spindle 3: Left / 11 kW / 50 mm spindle 4: Right / 7.5 kW / 50 mm Hnedpfx Ajxl Av Nsacou spindle 5: Top / 11 kW / 50 mm spindle 6: Bottom / 18.5 kW / 50 mm spindle 7: Top / 7.5 kW / 50 mm spindle 8: Bottom / 7.5 kW / 50 mm feed: max. 60 m/min // 11 kW // Hydraulic

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, Travel paths Longitudinal movement (X-axis): 5,500 mm Vertical movement (Y-axis): 3,200 mm Spindle movement (Z-axis): 600 mm RAM/Outrigger movement (W-axis): 600 mm Feed rates X, Y, and Z axes: 2,800 mm/min Spindle unit Spindle power: 37 kW Boring spindle diameter: Ø 125 mm Spindle sleeve diameter: Ø 240 mm Spindle taper: SK50 Hodpfx Aexn Al Aoaconu Number of gear stages: 4 Spindle speed range: 3–700 rpm Faceplate diameter: Ø 1,000 mm Faceplate speed range: 1–82 rpm Gear stages Stage I: 3–33 rpm Stage II: 30–85 rpm Stage III: 88–247 rpm Stage IV: 250–700 rpm Connection data Operating voltage: 3 × 400 V Mains frequency: 50 Hz Total connected load: 80 kW Dimensions and weight Machine footprint: approx. 8 × 5 m Total height: approx. 5.5 m Machine weight: approx. 50,000 kg Features and accessories Robust, flat-bed horizontal boring mill in moving column design, in very good condition Retrofit including electrical system in 2014 Refurbished control panel with Heidenhain digital readout Coolant tank with belt filtration system, high and low pressure pumps Counterweight for weight compensation Conventional control Thread cutting device with change gears Axis drives via intermediate gearbox Swiveling control panel for operation from the front or rear of the machine Telescopic steel cover for X-axis Scope of delivery excludes foundation plates and rotary table Chip conveyor included in delivery

Year of construction: 1999, condition: ready for operation (used), General Data Machine weight 3200kg This WEINIG Unimat 23 E was manufactured in 1999, designed for efficient wood planing. Ideal for woodworking professionals looking to enhance their production capabilities. Contact us for more information. Hnodpfx Aoxn U Amoacsu Application Types Planing

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, cutting length (max.): 2,250 mm, cutting width (max.): 2,310 mm, cutting width at rip fence: 900 mm, cutting height (max.): 100 mm, saw blade diameter: 315 mm, overall weight: 380 kg, extraction nozzle diameter: 120 mm, table height: 900 mm, slide length: 2,250 mm, table width: 560 mm, rotational speed (max.): 3,500 rpm, pivoting range: 45 °, power: 5 kW (6.80 HP), Cutting plane directly at the saw blade Heavy-duty steel grey cast iron construction Easy-running and precise sliding table made of anodized aluminum with proven and permanently smooth ball-contact system on hardened guides, 10-year warranty on guideway wear Large-area squaring frame mounted on telescopic arm, longitudinally adjustable Angle-adjustable aluminum telescopic fence with professional stop flaps Rip fence with quick clamping and fine adjustment Large machined grey cast iron worktable remains permanently flat Standard table extension and table widening make it easy to work with larger workpieces Smooth running and precise cuts Equipped with a powerful three-phase motor The large cast iron saw unit is double-mounted to the cast table, ensuring stability, precision, smooth operation and long service life; 6-year Holzkraft warranty on wear of tilting segments Maximum cutting height is achieved even with scoring unit installed Made in Italy Technical Data Dimensions and weights Weight (net) approx.: 380 kg Extraction connection Extraction port diameter: 120 mm Extraction port diameter (blade guard): 60 mm Installation information Transport width: 900 mm Machine body length: 1388 mm Machine body width/depth: 689 mm Space requirement length: 5118 mm Space requirement width/depth: 3830 mm Space requirement explanation: Dimensions cover maximum travel or usable length Working area length: 1000 mm Hnedpfx Aaexn H Arscou Working area width/depth: 2000 mm Working area explanation: Please add specified measurements to the space requirement to obtain the recommended free installation area for the machine. Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Main drive motor power: 5.0 kW Main drive duty cycle: S6 Main drive duty cycle: 40% Sliding table and work table Sliding table length: 2250 mm Sliding table width: 270 mm Sliding table height: 124 mm Table length: 840 mm Table width: 560 mm Table height: 900 mm Circular saw unit Cutting width with rip fence: 900 mm Max. crosscut width left of saw blade: 2310 mm Squaring length: 2250 mm Saw blade tilt: 90 – 45° Max. cutting height 90°: 100 mm Max. cutting height 45°: 78 mm Saw blade diameter: 315 mm Saw blade speed: 3500 rpm

Condition: good (used), Year of construction: 2012, fuel type: diesel, color: blue, Drivetrain Make of engine: Kubota Weights Empty weight: 2.990 kg Functional Mast: articulated arm Lifting capacity: 200 kg Working height: 2.300 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Tyre brand: Rubber tracks Delivery terms: EXW Max swing of arm in degrees: 360 Hjdpfx Aaexb Tbnecjnu Max swing of platform in degrees: 160 Transport dimensions (LxWxH): 6,2x0,98x1,97 Production country: DE Additional information Please contact Sales Department Collé Sittard for more information

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 3520, travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,300 mm, feed length W-axis: 800 mm, 1 BORING MACHINE TOS WHN 13 CNC TNC 355 Year 1994 W 800 . X 3500 . Y 2000 Z 1300 Complete machine Complete tooling Hnedpjw R Ag Hefx Aacsu

Condition: used, Year of construction: 2002, Weinig four-sided planer max. planing width 230mm max. planing height 120mm Digital positioning Hsdpfx Aajxg Nbujcjnu 5 stations + 1 output unit for rounding or chamfering Total power 43kw 380V

Year of construction: 2012, condition: excellent (used), YASDA YBM Vi40 CNC jig boring machine / machining center Hnjdpfx Aopqx H Toaceu machine in perfect condition incl. accessories (see photos) For the complete photo gallery: See attached PDF file (from page 4) TECHNICAL DATA Travels X-axis: 900 mm Y axis: 500 mm Z axis: 450 mm Distance from the table surface to the spindle tip: 100 to 550 °. Rotary table diameter: 400 mm Pallet loading capacity: 200 kg Table surface configuration: 44-M12 thread C axis: 360 ° Table tilt axis movement range (B axis): +- 110 ° Distance between center of tilt axis and rotary table: 0 mm Rotary axis (C axis): 100 rpm Max. rotation of the inclination axis: 20 rpm Motor for rotary axis: 4,2 kW Motor for inclination axis: 4,5 kW Spindle type: SA40-24`000-18,5 Spindle speed range: 100 - 24`000 rpm Spindle speed range programming: Programming by direct input of a 5-digit S-command Number of spindle speed ranges: 1 Type of spindle conical bore: HSK-63A Inner diameter of spindle bearing: 65 mm diameter Rapid traverse Speed: X,Y,Z axis: 20`000 rpm Feed rate: X,Y,Z axis: Max. 5000 rpm C-axis: 100 rpm B axis: 20 rpm Smallest input increment: 0.0001 mm/deg Automatic tool changer: 60 tools Selection method: Any selection Tool shank type: HSK-63 A Max. tool diameter Tool diameter: 100 mm Max. tool diameter Tool diameter at full setting: 70 mm Max. Tool length: 250 mm Max. Tool weight: 7 kg Tool balance weight: within G2.5 Machine dimensions: 3220 x 3885 x 3515 mm Machine weight: 15`000 kg No responsibility is taken for the accuracy, completeness and timeliness of the information.

Condition: good (used), Year of construction: 2001, WEINIG MOULDER TYPE PROFIMAT 23 FORTEC 5 SPINDLES NO. 94151 YEAR 2001 WITH AUTOMATIC OUTFEED SYSTEM Weinig Year: 2001 Motor power: 33 kW Capacity (mm): 230 mm x 120 mm Working units: 5 1st unit: surface planer 2nd unit: right spindle moulder 3rd unit: left spindle moulder 4th unit: thickness planer 5th unit: bottom horizontal spindle Infeed table length: 2000 mm Noise reduction lips: Yes Control panel with Siemens SIMATIC OP7 programmable 2-axis control Feed speed: variable speed drive from 5 to 24 m/min Electric rise and fall Digital counter on the control panel and digital mechanical counters at each axis movement Guard: Yes CE compliant: Yes Special features: - Pneumatically retractable infeed roller before the surface planer - Independent pneumatic feed pressure - Forward and reverse wood feed device - Independent spindle start-up, except the two spindle moulders, which operate together - 2-axis height and width programming - Device for all widths with automatic infeed side pusher coordinated with the left spindle moulder - Disengageable system for manual operation Hodpfoxl Rv Rjx Aacsnu - Centralized lubrication system for tables with Waxilit groove - Profiling cover, 180 mm diameter, on right and left spindle moulders and bottom horizontal spindle - Short wood processing device - Extraction diameter: 5 x 140 mm

Condition: used, Year of construction: 1996, spindle diameter 60 mm x-travel max. 1000 - min. 100 mm y-travel max. 1000 - min. 100 mm bore capacity in steel max. 40 mm thread capacity max. M24 Thickness max. 60 - min. 5 mm spindle turning speed - stepless einstellbar 1 - 1.000 U/min feed stepless einstellbar, Eilgang 1 - mm/min feed stepless einstellbar, Arbeitsgang mm/min feed power 16 KN tool taper SK 40 spindle stroke 600 mm positioning speed in allen Achsen 1 - 10.00 mm/min positioning accuracy auf 300 mm = +/- 0,01 mm table load max. 500 kg work height max. 1000 mm weight of the machine ca. 4,8 t dimensions of the machine ca. 3,5 x 3,3 x 3,1 m Control Bosch Hsdpfx Aaegvkkzocsnu CNC plate drilling system HMB PBM1000/60 - W12 for drilling head plates and Base plates in steel construction with tool changer (12x) Number of drilling spindles: 1 pc. Operating Voltage: 220/380V Frequency: 50 Hz Total connection value: 22 kVA

Condition: used, Year of construction: 2010, operating hours: 3,123 h, 2010 | Haulotte H 23 Tpx (23m) | Used Articulated Boom Lift | 3123 hours 📍Location: France, Pessac 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! Hnjdpfjxirzijx Aaceu 💰 Buy Now for EUR 19600 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 51 inspection points 49 approved ✅ 2 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Very good general condition of the Boom Lift, only a bump on the access bar to the bucket needs to be reported. A slight bump on the distributor hood. Slight wear of the tire tread, on the right-side wheels. And slight wear of the paint. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39669 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 07-14, travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,300 mm, feed length W-axis: 800 mm, 1 TOS BORING MILL TYPE WHN13 8C CNC TNC 426 CB YEAR 1990 W800 .X3500 . Y2000 .Z1300 COMPLETE MACHINES, COMPLETE TOOLING Hnedpfx Aajw R Akljcju

Condition: used, Year of construction: 2010, Technical data: - Wescott drill chuck 0-20 mm - Cross travel 250 mm - Depth travel 215 mm - Height adjustment 165 mm - Tiltable drilling unit 45°-90°-45° - Extraction connection 100 mm - Table size 600 x 320 mm - Working height 870 mm - Motor 2.2 kW (3.0 HP) / 400 V - Speed 2840 rpm - Single-lever operation - Drilling unit tiltable to both sides - Dowel drilling device with 4 index positions: 16-22-25-32 mm - Height adjustment via handwheel - Eccentric clamp - Extendable table extension - Mitre stop - Dimensions L=1160, W=750, H=1080 mm - Weight 260 kg Hnsdpfx Asxcmv Ujacsu Storage location: Nattheim

Condition: excellent (used), color: red, lifting height: 33,000 mm, Year of construction: 2021, operating hours: 1,146 h, Drivetrain Drive: Wheel Weights Empty weight: 3.475 kg Functional Lifting capacity: 1.500 kg CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Transport dimensions (LxWxH): 9,2x2,27x2,63 Production country: DE Additional information Please contact Vink Machinery for more information Klaas K23/33 TSR * 2021 * Diesel drive * 1146 working hours * 33-meter hook height Hjdpoxfrh Ijfx Aacenu * 23-meter horizontal reach * Remote control * Equipped with 2 work lights * 1500 kg lifting capacity * Wheel drive * Prepared for a man basket * Includes documents

Condition: used, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 280 mm, travel distance Z-axis: 475 mm, overall weight: 1,850 kg, table length: 1,100 mm, table width: 250 mm, Spindle taper: ISO 40 RPM.: 35-1800 (variable) Travel: X750 Y280 Z475 mm. Table size: 1100 x 250 mm. Automatic feed: X, Y & Z. Hnodoxpfy Eopfx Aacsu Rapid speed: X, Y & Z. Motor: 5 HP. Digital readout: Heidenhain Positip 850 (X, Y & Z) Country of origin: Spain. Size (L x W x H): 1850 x 2100 x 2000 mm. Weight: 1850 kg. Variable speed with digital readout in 2 gear ranges, variable feed speed with digital readout, work ligth and 3-axis Heidenhain digital readout. All our machines are tested and serviced before delivery.

Condition: used, Year of construction: 1971, workpiece weight (max.): 25,000 kg, turning diameter: 2,000 mm, total height: 5,600 mm, year of last overhaul: 2006, controller manufacturer: NUM, controller model: 1060, space requirement length: 4,100 mm, space requirement width: 3,500 mm, CONTROLS .. CNC controls NUM 1060 WORKING RANGE TURNING Hjdpfx Ajxn Ipasaconu .. swing diameter (max): 2000 mm .. workpiece weight max.: 25000 kg CROSS BEAM SLIDE .. - rotation speeds (min): 2 /min .. - rotation speeds (max): 450 /min ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 4100 mm .. space requirements -front/back-: 3500 mm .. total height: 5600 mm

Condition: good (used), power: 68 kW (92.45 HP), fuel type: diesel, color: yellow, Year of construction: 2014, operating hours: 5,811 h, Equipment: air conditioning, Technical information Track width: 60 cm Drive: Track Make of engine: SAA4D95LE-6 Empty weight: 8.640 kg Functional CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: KMT0D121E01080161 Other information Front tyres / undercarriage remaining: 80 Emission level: Stage IIIB / Tier IV interim Delivery terms: EXW Transport dimensions (LxWxH): 4,275x3,2x2,775 Production country: JP Additional information Hnsdoxc N Dhepfx Aacou Please contact Antoon Schroder, Dennis van Loon or Jeroen Rijk for more information

Condition: used, Year of construction: 2006, Solid drill diameter / mm Hodpfx Aaoxgu R Iecenu bore depth / mm number of spindles / Froriep CNC deep hole drilling machine – the prefabrication specialist Year of manufacture: 2006 Control system: Siemens Sinumerik 840D Max. drilling depth: 8,850 mm Workpiece diameter: 150 – 900 mm Speed range: 1 – 300 rpm Feed rate: 0.5 – 4,500 mm/min Drive power: 129 kW Swing diameter over bed: 1,000 mm Clamping diameter faceplate: 900 mm Weight: approx. 47,000 kg Ideal for precise pre-drilling of deep holes – including faceplate, steering ring

Condition: used, Year of construction: 2010, Technical data: - Wescott drill chuck 0-20 mm - Cross travel 250 mm - Depth travel 215 mm - Height adjustment 165 mm - Swiveling drilling unit 45°-90°-45° - Extraction port 100 mm - Table size 600 x 320 mm - Working height 870 mm - Motor 2.2 kW (3.0 HP) / 400 V - Speed 2840 rpm - Single-lever operation - Drilling unit swivels to both sides - Dowel drilling device with 4 index positions: 16-22-25-32 mm - Height adjustment via handwheel - Eccentric clamp - Extendable table extension - Mitre fence - Dimensions L=1160, W=750, H=1080 mm - Weight 260 kg Hsdpfx Aexcmv Ioacjnu Storage location: Nattheim

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 1873, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 1,250 rpm, spindle diameter: 50 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid commits you to collect the machine on time between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Travel range X-axis: 500 mm Travel range Y-axis: 400 mm Travel range Z-axis: 1,000 mm Max. spindle speed: 1,250 rpm Spindle diameter: 50 mm Table dimensions: 1,550 x 980 mm With T-slots: 6 MACHINE DETAILS Electrical data Operating voltage: 380 V Rated current: 33.1 A Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 4,500 x 1,600 x 2,500 mm Total weight: 8,000 kg EQUIPMENT Hedpfxoxm S N Ie Aacjnu Chuck Various suitable accessories

Condition: used, Year of construction: 1987, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 315 mm, travel distance Z-axis: 450 mm, overall weight: 2,300 kg, table length: 1,300 mm, table width: 280 mm, power: 3.7 kW (5.03 HP), Spindle taper: ISO 40 RPM.: 85-1300. Travel: X1000 Y315 Z450 mm. Table size: 1300 x 280 mm. Automatic feed: X & Y Rapid speed: X, Y & Z. Motor: 3,7 kW. Digital readout: Newall DP 700 (X, Y & Z). Year: 1987 Country of origin: Taiwan. Size (L x W x H): 1650 x 2100 x 2000 mm. Weight: 2300 kg. All our machines are tested and serviced before delivery. Hsdpfx Aajxpftfecsnu

Condition: good (used), power: 126 kW (171.31 HP), fuel type: diesel, color: yellow, Year of construction: 2014, operating hours: 7,717 h, Technical information Track width: 86 cm Drive: Track Make of engine: SAA6D107E-2* Hnsdpfexc N A Rsx Aaceu Empty weight: 18.690 kg Functional CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: KMT0D120V0103880 Other information Front tyres / undercarriage remaining: 80 Emission level: Stage IIIB / Tier IV interim Delivery terms: EXW Transport dimensions (LxWxH): 6,22x3,53x3,34 Production country: JP Additional information Please contact Antoon Schroder, Dennis van Loon or Jeroen Rijk for more information