Used Bolt for sale (1,930)

Condition: used, change gear bolt Djdpfxjd Ihbmo Afnjkh

Condition: good (used), Technical data for pallet racking upright: Racking system: SSI Schäfer Type: PR 600 Included in delivery: 01x pallet racking upright, used Material finish: Sendzimir galvanized Upright type: P175 Profile dimensions: 100 x 75 x 2.50 mm Incl. horizontal and diagonal bracing, Dedjydh Ipjpfx Afnekh and base plates The uprights are pre-assembled (bolted truss construction) Height: 7,100 mm Depth: 1,100 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipping of this item is subject to extra costs, which can be provided upon request depending on the place of delivery and scope of delivery.

Condition: good (used), Technical data for pallet rack upright: Racking system: SSI Schäfer Type: PR 600 Included in delivery: Djdpoydc Rxefx Afnekh 01x pallet rack upright, used Material colour: Sendzimir galvanized Upright type: P175 Profile dimensions: 100 x 75 x 2.50 mm Incl. horizontal and diagonal braces and base plates The uprights are pre-assembled (bolted truss structure) Height: 7,400 mm Depth: 1,100 mm Your contacts in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the item: This item is offered for collection only. Any additional shipping or transport costs will be charged separately, and can be provided upon request depending on the delivery location and scope.

Condition: good (used), Technical Data for the Pallet Racking System: Racking System: SSI Schäfer Type: PR 600 Technical Data for Installation: Number of rack rows: 01 pc Length per rack row: 22,440 mm Number of bays per rack row: 06 pcs Number of levels incl. ground level: 06 pcs Technical Data for Capacity: Pallet spaces per bay: 28 pcs Pallet spaces per rack row: 168 pcs Total pallet spaces: 168 pcs Assumptions: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Max. pallet weight: 900 kg Max. bay load: 19,000 kg Lowest clear storage height: 1,080 | 880 mm Scope of delivery includes: 07x Pallet rack frames, used Material finish: Sendzimir galvanized Frame type: P215 Profile dim.: 120 x 100 x 2.5 mm Including horizontal and diagonal braces, and base plates Frames are pre-assembled (bolted construction) Height: 14,100 mm Depth: 1,050 mm 72x Pallet rack beams, used Material finish: RAL 5010 gentian blue INP profile: 120 x 58 mm Beam type: TRV1-360-12-l Connector: 4 hooks Clear width: approx. 3,600 mm Max. load per pair of beams: 3,600 kg, with evenly distributed load Dkedeyc S Taepfx Afneh 144x Locking pins, used Material finish: Sendzimir galvanized For securing the beams against unintentional removal 28x Bolt anchors, new Manufacturer: Hilti Model: HST2 V3 M12x105 5-25 Design: Carbon steel, galvanized Approved for: cracked concrete 14x Levelling plates, used Design: fully galvanized For leveling rack frames that are set up on uneven floors 01x Load sign with specifications for bay and compartment loads, manufacturer, and commissioning number Dimensions: 420 x 297 x 3 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for collection only. Transportation or shipping of this item is subject to additional costs, which can be quoted separately depending on the delivery location and order volume.

Condition: used, Year of construction: 2023, operating hours: 2,798 h, functionality: fully functional, Basic Package AK 640 SA: Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting in accordance with EU regulations Tires: 385/65 R22.5 Gross vehicle weight 32,000 kg Hydraulically adjustable support legs Splash guards (inner and lateral mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, compliant with EUROMOT V emission standard Auxiliary hydraulic connection 20 l/min Load-dependent feed control incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank: 2 x 450 liters Feed roller: length 1,690 mm, diameter 510 mm, with bolt-on tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: 'Streusel plus' flail tip Impact plate with teeth Centrally arranged wear strips Electric pump for cylinder functions (e.g. lifting/lowering support legs and opening/closing rear basket, folding/unfolding rear conveyor, disengaging drive) when engine is off 24V electrical system Separate switch box at the rear of the machine Hydraulically folding fine shredding basket "Multimesh" (mesh size between 30 - 280 mm, gradations on request), incl. one-piece rear flap Rear discharge conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic center section Lower conveyor: belt length 3,800 mm, belt width 1,400 mm Engine compartment protection plate (material: Hardox) Moistening system for external water connection Scraper floor with 71 slats Wear protection in drum area Reinforcement plates on both sides of the feed hopper (made of wear-resistant steel) Complete radio remote control Fire extinguisher Acoustic start-up warning Dsdpfjxx Rrrjx Afnskh Doppstadt telematics system Paintwork: RAL2011 deep orange Optional Equipment: Hydraulic drive Fine shredding basket Scraper floor chain lubrication Lighting package: engine compartment and rear conveyor LED lighting package (scraper floor and infeed) 'Bear Paw' flail tips Delivery date by arrangement Available from 04/2026

Condition: excellent (used), mileage: 25,460 km, power: 345 kW (469.07 HP), first registration: 11/2021, fuel type: diesel, fuel: diesel, color: orange, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: AdBlue, crane, = More options and accessories = - Power Take-Off (PTO) Dksdpsygtcdjfx Afnsh = Further information = Gross Vehicle Weight (GVW): 32,000 kg CE marking: yes Technical condition: very good Visual condition: very good VOLVO FH 460 8X4 TRACTOR-TRUCK COMBINATION WITH CRANE PREPARATION!!!!! FOR HIAB 858 + JIB NO CRANE INCLUDED!!!! EURO 6 L PACKAGE, 460 HP DRIVELINE: 8X4 WHEELBASE: 515 cm AIR SUSPENSION FH CAB WITH AIR CONDITIONING AND AUXILIARY HEATER I-SHIFT AUTOMATIC TRANSMISSION FULL INNER LINER CHASSIS FROM FACTORY TRACTOR-TRUCK COMBINATION ADJUSTABLE FIFTH WHEEL THIS TRUCK IS PREPARED WITH SUBFRAME FOR HIAB 858 + JIB COMPLETE WITH POWER TAKE-OFF, REAR STABILIZERS, HYDRAULIC TANK CRANE CAN BE INSTALLED – JUST BOLT ON AND IT'S READY TOOLBOXES REMOVABLE BALLAST PLATFORM WITH REMOVABLE ALUMINIUM SIDE BOARDS 475 cm LENGTH LASHING EYES FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Condition: new, maximum load weight: 30,190 kg, overall weight: 43,000 kg, axle configuration: 2 axles, Equipment: ABS, You can find our complete selection of vehicles, including those available for immediate delivery and short notice, on our website. Excerpt from the equipment features – full specification available on request. Loading platform: * Low bed with externally mounted beams in extendable SUPER LOW design, length approx. 6,850 mm * Low bed with fixed hardwood floor approx. 40 mm thick and mechanical locking * Supply lines are routed protected within the extendable beams, automatically adjusting to the respective low bed length * 5 pairs of tie-down rings, foldable outward (LC 10,000 daN) * 6 pairs of threaded blocks on the inner beam for mounting screw-on RUD rings Gooseneck: * Gooseneck in SNT design for optimizing loading platform length, length approx. 3,750 mm * Gooseneck hydraulically liftable/lowerable and detachable * Technical fifth-wheel load: 23,000 kg * For tractor units: 4 x 2, 6 x 2 Rear chassis: * Rear chassis in a short version with closed outer frame and checker plate covering * Chassis with excavator trough, closed at the rear half to accommodate air tanks * 2 pairs of tie-down rings, foldable outward (LC 5,000 daN) * 1 pair of tie-down rings, foldable outward (LC 10,000 daN) * 1 pair of horizontal tie-down rings, at front & rear of chassis (LC 10,000 daN) Axles: * BPW axles, hydro-mechanically forced-steered Dkedpfexarl Njx Afnjh * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve Tyres: * Tyres 245/70 R 17.5 3PMSF * Make of our choice * Load index (146/146F) * TPMS tyre pressure monitoring system according to ECE R 141 * Data transmission to the truck via the standardized EBS interface per ISO 11992 * For correct display, the truck must be able to transfer and display this data Brake system: * Brake system in compliance with EU regulations featuring EBS-E (2S2M) Electrical system: * Electrical system per EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lamps blink with the indicator * ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15 pin sockets as per ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel construction: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Painting: * Complete steel structure automatically shot-blasted after welding * Second blasting with corundum for optimal adhesion of the coating system * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for maximum corrosion protection * Final coat with 2 layers of 2K topcoat, single color RAL 3002 carmine red as per RAL 841GL system * Rims in silver * Rear section metallized and painted in RAL 9010 (pure white) * Metallic paint not possible * Paint structure tested in salt spray test per ISO 9227-NSS * Cavity sealing with special wax Incl. the following additional features: * 2-inch kingpin * Galvanized steel front wall, approx. 400 mm high * Remote steering from front and rear via cable remote control with push buttons, with single-track axle monitoring (without installation in the tractor unit) * Hydraulic connections from gooseneck to low bed with multi-coupler instead of screw couplings * Electro-hydraulic power unit * Preparation for mounting bolt-on container positions for 1x 20' or 1x 40' container

Condition: new, maximum load weight: 48,010 kg, overall weight: 66,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete range of vehicles, including those available immediately and at short notice, on our website. Excerpts from the equipment list are detailed below. Full equipment details on request. Gooseneck: * Gooseneck in SNT design to optimize load bed length, approx. 3,700 mm long * Gooseneck hydraulically liftable/lowerable and detachable * For tractor units: 6x4 or 8x4 Low-bed: * Low-bed with external beams, extendable design, SUPER LOW design, approx. 7,550 mm long * Low-bed with fixed hardwood floor, approx. 40 mm thick, and mechanical lock * Supply lines run protected in the extendable beams and automatically adjust to the respective low-bed length * 7 pairs of lashing rings, foldable outwards (approx. LC 10,000 daN) * 6 pairs of threaded blocks on the inner beam for mounting screwable RUD rings Rear undercarriage: * Rear axle assembly with closed outer frame, checker plate surface and continuous prism excavator recess, approx. 1,450/900 x 505 mm, open at the rear * 2 pairs of lashing rings, foldable outwards (approx. LC 10,000 daN) * 1 pair of lashing rings, horizontal in the recess (approx. LC 10,000 daN) * 2 pairs of lashing rings, horizontal in the recess (approx. LC 16,000 daN) * 2 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame PENDLE AXLE: * PENDLE AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on the axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off valves and locking pins for securing in raised position * Technical axle load: 12,000 kg each * Hydraulic axle compensation * Axle tools Tyres: * Tyres 245/70 R 17.5 3PMSF – manufacturer of our choice * Load index (146/146F) Braking system: Wabco brake system in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Painting: * Complete steel structure automatically shot blasted with throw wheel system after welding * Second blasting using corundum for optimal adhesion of the coating system * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminium) to ensure the best corrosion protection * Final painting: 2 layers of 2K topcoat, single-color RAL 3002 Carmine Red per RAL system 841GL Including the following accessories: * Preparation for the mounting of bolted container positions for 1x 20' or 1x 40' container on the external beams * Without container locks Dodpfsxbmprjx Afnekh * 3.5 inch king pin * One galvanized steel front wall, approx. 400 mm high * Remote steering operation by cable at front and rear with push-button control, including single-track control of axles (installation in the tractor unit not included) * Electro-hydraulic unit * On the gooseneck: plug-in aluminium side walls and tailgate, approx. 2,000 x 400 mm (L x H) * The rear galvanized plug-in stakes are removable (body length approx. 2,120 mm) * Hydraulic connections from gooseneck to low-bed with multi-coupling instead of threaded couplings. No guarantee for seals * On the gooseneck, a separate air connection with air gun * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the loading area * One INOX toolbox, approx. 1,350 x 400 x 400 mm, on the gooseneck * 2 pairs of screwable lashing rings M20 (LC 5,000 daN) * 2 pairs of screwable RUD rings VLBG-4 M24 (LC 8,000 daN) * Folding extensions, approx. 230 mm wide per side, extension planks made of hardwood. The maximum load is on an area of approx. 200x2

Condition: used, Bore: 60 mm Width: 3-5 mm Diameter: 370 – 380 mm Bolt circle: 100 mm Dksdpfxslf I D Ej Afnjh - as new or sharpened, - 8 pieces, - suitable for Holzma OPT HPP 350 or similar.

Condition: used, Year of construction: 2022, _____KOMEX M13 500 Thermal Weed Control Device Demonstration unit with 100 operating hours Compact and versatile KOMEX M13 500 – the compact and flexible thermal weed control unit. Thanks to the forklift-compatible entry slots and the slim design, it offers numerous possibilities for weed removal, chewing gum removal, and gentle surface cleaning. Its mobile and transportable construction makes it perfectly suited for all types of pick-up beds or flatbed vehicles. Suitable for all carrier vehicles with loading surfaces Pick-ups Electric vehicles Municipal vehicles Tractors, forklifts, and many more. Standard equipment: - 12 Volt hot water steam generator, 13 l/min, digital - Forklift frame 1.30 x 0.96 m for KOMEX-M13-500 - Water tank 250 l, vertical, traffic grey RAL 7042, front - Water tank 250 l, vertical, traffic grey RAL 7042, rear - Battery compartment with cover for KSRA - Automatic hose reel, stainless steel for 15 m - 15 m HW hose with protective sleeve and abrasion guard - Set: Battery compartment, 260Ah battery, charger, 80A safety plate - 2-piece hand lance set, KHL-P (pistol) with KHL-D (nozzle), KHL-Z cylinder lance and quick coupling - Dimensions (L x W x H): 131 x 96 x 122 cm - Unladen weight approx. 420kg Special equipment: - Mount including bolt and chain, coated in RAL 6018 GREEN - Walk-behind surface tool - 4-fold straight lance holder, 2.0 - Lance with brass brush D8 cm, Lance with brass brush D8 cm with handle, Storage location: Anton Hülsken Dkodpfx Afoyhtp Hsneh

Condition: new, empty load weight: 5,407 kg, maximum load weight: 33,593 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, suspension: air, tire size: 385/65 R22,5, Year of construction: 2025, Equipment: ABS, Unladen weight: 5,407 kg, permissible total weight: 39,000 kg, cargo area length: 13,620 mm, cargo area width: 2,480 mm. Tyre size: 385/65 R22.5. 1st axle: , 2nd axle: , 3rd axle: , air suspension, underrun protection, front lift axle, electronic braking system (EBS), toolbox, bolted chassis, connector plugs 1x15 and 2x7 pole, antispray, tyre pressure monitoring, impact buffers. You can find our complete range of vehicles at . Interested in financing? With our Value Added Service, we offer you individual financing solutions as well as full service and telematics services. We are happy to advise you. Dkjdpeyhrq Asfx Afnsh

Condition: new, maximum load weight: 37,075 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including immediately available and short-term delivery vehicles, on our website. Sample of the equipment. Full equipment details available on request. Dodpfsyhkrrsx Afnskh Neck (Gooseneck): * Gooseneck with front corners bevelled approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Platform: * Loading area behind the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear bevel approx. 1,000 mm x 8° * 6 pairs of external foldable lashing rings (LC 5,000 daN) * 2 pairs of external foldable lashing rings (LC 10,000 daN) * 1 pair of internal foldable lashing rings at the central beam front (LC 10,000 daN) * Cut-outs in the outer frame of the platform for hooking in tensioning straps (LC 2,000 daN) * Grating flooring C40/4 (point load approx. 2.3 t over an area of approx. 20 x 20 cm), treadplate flooring over the axles Two-piece Steel Ramps: * One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating surface C40/4 (point load approx. 2.2 t over an area of approx. 20 x 20 cm) * Ramp with hydraulically folding ramp sections * Hydraulic lift unit, hydraulically adjustable * Maximum load per pair: approx. 40,000 kg Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lift capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 fixed axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reversing lock automatic via reverse gear and manual activation * Air suspension with lift and lower valve Braking System: * WABCO braking system in compliance with EU regulations with EBS-E (2S2M) Tyres: Tyres 235/75 R 17.5 3PMSF – make at our discretion TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Paintwork: * HRM metallisation of the complete vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminium) to ensure maximum corrosion protection * Final coating with 2 layers of 2K topcoat, single-coloured in RAL 3002 Carmine Red as per RAL System 841GL * Rims in silver grey Accessories included: * 2-inch king pin * Galvanized steel front wall approx. 400 mm high * Grating in the gooseneck bevel C30/3 (point load approx. 2 t over an area of approx. 20 x 20 cm) * Grating in the platform bevel C40/4 (point load approx. 3.4 t over an area of approx. 20 x 20 cm) * Electric-hydraulic unit at the rear under the platform * Plug-in aluminium side and rear boards on the gooseneck, approx. 2,440 x 400 mm (L x H). Rear galvanized insert stanchions removable. (Body length approx. 2,560 mm) * Electric winch with radio remote control, approx. 5,400 kg lifting capacity, including approx. 9.5 mm thick steel cable, approx. 24 m long, with cable guide roller * Bolted approx. 5 t ring for winch cable loop on the neck without deflection pulley * One galvanized toolbox integrated in the sloped gooseneck with opening for a winch * Grating on the gooseneck C30/3 (point load approx. 2 t over an area of approx. 20 x 20 cm) * 7 pairs of stanchion sockets for plug-in stanchions, approx. 100 x 50 mm, in the outer frame of the platform * Lift axle on the front axle, controlled by TEBS E depending on actual axle load and current loading status * 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN): 2 pairs in the lift bed, 5 pairs in the rear section of the platform

Condition: new, maximum load weight: 37,075 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment list. Full equipment details available on request. Gooseneck: * Gooseneck with front corners beveled approx. 45° and rear taper approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN). Hardwood floor approx. 30 mm thick Loading area: * Loading area after the gooseneck hydraulically liftable/lowerable, length approx. 2,800 mm, with rear taper approx. 1,000 mm x 8° * 6 pairs of folding outward lashing rings (LC 5,000 daN) * 2 pairs of folding outward lashing rings (LC 10,000 daN) * 1 pair of inward folding lashing rings at the front central beam (LC 10,000 daN) * Cutouts in the external frame of the loading area for attaching tension belts (LC 2,000 daN) * Grating surface C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), over the axles checker plate Two-piece steel ramps: * One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with C40/4 grating (point load approx. 2.2 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically folding in/out ramp sections. Hydraulic lift system, hydraulically adjustable * Maximum load per pair: approx. 40,000 kg Landing gear: * JOST landing gear (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle Dedpsyhkqzjfx Afnokh * Technical axle load: 12,000 kg each * Electromagnetic reverse lock via reverse gear and manual activation * Air suspension with lift and lower valve Brake system: * WABCO brake system according to EU regulations with EBS-E (2S2M) Tyres: 235/75 R 17.5 3PMSF – Manufacturer of our choice TPMS: * TPMS tire pressure monitoring system in accordance with ECE R 141 Paintwork: * HRM metalizing of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimal corrosion protection * Final paint in 2 coats of 2K topcoat, solid color in RAL 3002 Carmine Red in accordance with RAL system 841GL * Rims in silver grey Including accessories: * 2-inch kingpin * One galvanized steel front wall, approx. 400 mm high * Grating in the gooseneck taper C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * Grating in rear taper of the loading area C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm) * Non-slip sand paint on the checker plates above kingpin and loading area * Electro-hydraulic unit at the rear under the loading area * On the gooseneck: plug-in aluminium side walls and rear wall, approx. 2,440 x 400 mm (L x H). The rear galvanized drop-in stakes are removable. (Body length approx. 2,560 mm) * An electric cable winch with radio remote control, approx. 5,400 kg pulling force, including approx. 9.5 mm thick steel cable, approx. 24 m long, with cable guide pulley * Bolted 5 t ring for cable winch deflection on the neck without deflection pulley * One galvanized toolbox integrated in the beveled gooseneck with opening for a winch * Grating on the gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the loading area * Lift axle on the front axle with control via TEBS E depending on current axle load and loading condition * 7 pairs comple...

Condition: new, maximum load weight: 48,300 kg, overall weight: 71,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including units available for immediate and short-term delivery, on our website. Extract from the equipment features. Full specification available on request. GOOSENECK: * Gooseneck with integrated 1-axle running gear (pendulum axle) in detachable design * Gooseneck hydraulically liftable and lowerable, including hydraulic coupling connected with the hydraulic axle compensation of the first axles * Length: approx. 5,200 mm, with a front taper of approx. 60° * Saddle load according to data sheet: W25-DSR2700-12/22.7 * For tractor units: 6 x 4 or 8 x 4 * Front bulkhead made of steel, detachable, approx. 400 mm high, with chamfered design * 1 pair of mechanical supports at the front of the gooseneck * ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets * 1 spare wheel holder inside on the front bulkhead of the gooseneck with lifting arm * 2 pairs of recessed lashing rings on the gooseneck (LC 2,500 daN) * 2 pairs of recessed lashing rings in the outer frame of the front chassis, foldable outwards (LC 10,000 daN) * 1 pair of lashing rings at the transition between chassis and loading platform (LC 10,600 daN) * On the gooseneck, 1 pair of plug-in side aluminium drop sides, approx. 400 mm high, anodized finish * On the gooseneck, 1 plug-in aluminium tailboard, approx. 400 mm high, anodized finish * 3.5-inch king pin * TPMS tire pressure monitoring system compliant with ECE R 141 * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 1 INOX toolbox with 1 lid, mounted on top of the gooseneck on the right in the direction of travel near the aluminium drop side, approx. 1,350 x 400 x 400 mm (L x W x H) LOADING AREA: * Lowbed with external main beams, designed as a telescopic loading platform in low-profile layout with front extension including a fixed approx. 50 mm hardwood floor Dodpfx Afsyhkqnjnjkh * Length x width approx. 8,000 mm x 2,740 mm * Mechanical pin-lug coupling from the lowbed to the chassis to exchange the platform or install extension beams * 1 locking position every approx. 500 mm in the extension section * 4 pairs of recessed lashing rings arranged lengthwise on the loading area, distributed along the outer frame/main beam (LC 10,000 daN) * 1 lashing ring per side on the outside of the rear crossmember (LC 10,000 daN) * Foldable widening sections, approx. 230 mm per side (WITHOUT timber planks) * Detachable widening planks, steel-edged * Preparation for installation of bolt-on container positioning devices for 1x 20' or 1x 40' container on the main beams. Container locks not included * 6 pairs of threaded blocks between the lashing rings under the upper flange on the main beam for mounting screw-type M24 rings (LC 8,000 daN) * 2 pairs of M24 screw rings (LC 8,000 daN) included REAR RUNNING GEAR: * Rear running gear with closed external frame, checker plate decking and continuous prism-shaped excavator recess, approx. 1,450 x 900 x 505 mm, open at rear * Pendulum axle, all axles hydro-mechanically forced steered * Hose burst valve on the axle compensation cylinders with automatic reset function * Hydraulic cylinders with shut-off cocks and pre-insertion facility for securing in raised position * Final paint on axles in 2 coats of 2-pack paint, solid colour DB 7350 Novagrau * Technical axle load: 12,000 kg each * Hydraulic axle compensation * 245/70 R 17.5 3PMSF. Brand at our discretion * Remote steering from front and rear via cable-control, with axle alig

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 730 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 470 mm, total height: 2,933 mm, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, tool weight: 8,000 g, product length (max.): 2,570 mm, number of axes: 5, This 5-axis Mazak CV5-500 vertical machining center was manufactured in 2023. It features a maximum spindle speed of 12,000 rpm, a dual-stage electric gear, and a rapid traverse rate of 36 m/min in X, Y, and Z axes. The machine supports a table load of 200 kg and includes a 30-position automatic tool changer. Ideal for complex, multi-axis precision machining. Contact us for more information about this machine. • Electrical load • Apparent power (40% duty): 45.5 kVA • Permanent apparent power: 43.4 kVA • Electrical connection: 3-phase AC 380/400/415/440/460/480 V ±10%; 50/60 Hz ±1 Hz • Pneumatics • Pressure: 5–9 bar • Flow rate: 26 l/min • Air blow-off through spindle: 345 l/min • Spindle • Spindle nose: Steep taper 40° • Gear stages: 2-stage (electric) • Rated power (AC inverter motor): 18.5 kW (10% duty), 15.0 kW (25%), 11.0 kW (40% and continuous) • Max torque: 119.4 Nm (10%), 95.5 Nm (25%), 70.0 Nm (40%); continuous 57.3 Nm • Axes, feeds, rapids • Number of simultaneously operating axes: 5 • Rapid traverse X/Y/Z: 36 m/min • Rapid traverse B/C: 30 min⁻¹ • Feed rates X/Y/Z: 36,000 mm/min • Table • Diameter: 500 mm • Tapped holes: M16 × 2 • Reference bore: Ø50 mm H6 (+0.016 / −0.000 mm) • Workpiece capacity • Max diameter: 500 mm • Max height: 320 mm • Travels / Working area • B-axis swivel/indexing: 220° (±110°), 0.0001° • C-axis swivel: 360° • Distance spindle nose – table top (horizontal): 50–520 mm • Distance spindle nose – table center (vertical): 95–565 mm • Automatic tool changer • Tool positions: 30 (optional magazine: 48) • Selection: Random, shortest path • Tool holder: MAS BT 40 or SK 40 • Pull bolt: Yamagaxi ANSI type • Max tool diameter: 80 mm (adjacent occupied) / 125 mm (adjacent free) • Max tool length: 300 mm • Tool change time (chip-to-chip): 4.60 s • Tank capacities • Guideway/ballscrew lube: 1.80 l • Hydraulic oil: 5.0 l Dksdpfxeyf H Tye Afnoh • Spindle coolant: 26.0 l • Option: 18,000 min⁻¹ spindle coolant (oil tank): 60 l • Total tank capacity: 320.0 l Additional equipment • Monitoring/sensing package • Analog inputs: 4 × 0–10 V • Digital inputs: 8 • ACC-SENSOR.1AXIS.10M: 1‑axis accelerometer with 10 m cable • Active power sensor (Dimensions: 8105 × H85 mm) • Toolscope IP for DIN rail Rev.4 • Industrial PC functionality in the control cabinet • Communication and control via HMI • PM: Tool and process monitoring • Tool breakage detection • Self-learning wear limit • Fixed and dynamic tolerance bands • Process performance monitoring strategy • Collision monitoring with all Goliog • DIN rail mounting in the control cabinet • Dimensions: 812 × H90 × D62 mm • Documentation including Toolscope • Chip conveyor (dimension reference provided: machine width 3,365 mm including chip conveyor)

Condition: used, empty load weight: 7,582 kg, maximum load weight: 34,418 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 09/2020, loading space length: 13,625 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, suspension: air, Year of construction: 2020, Equipment: ABS, Unladen weight: 7,582 kg, permissible total weight: 42,000 kg, cargo space (L W H): 13,625 mm x 2,480 mm x 2,750 mm, cargo volume: 92 m³, air suspension, underrun protection, front and rear lift axle, electronic braking system (EBS), bolted chassis, double-deck, connection plugs 1x15 and 2x7 pin, antispray. You can find our full vehicle range at . Financing required? With our Value Added Services, we offer you individual financing solutions, full-service and telematics services. We are happy to advise you. Dedpfx Ajygnzhefnokh

Condition: used, mileage: 2,500 km, first registration: 04/2024, overall weight: 2,700 kg, next inspection (TÜV): 04/2026, Year of construction: 2024, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Dedpoyg Uvrjfx Afnekh - We supply you with the right vacuum suction system for any application! - Delivery worldwide / Dealer inquiries welcome! Internal number: #382 Please note the images are sample photos. Actual equipment and color may differ. STS V-1.5 Vacuum Suction Tank Trailer Tank - 1,500-litre tank capacity - Hot-dip galvanized tank - Tank is slightly tilted to the rear for easier cleaning - Lateral cleaning opening in the tank to remove contamination or blockages without opening the tank lid - Tank lid opens completely to the passenger side and is secured with eye bolts - Two safety levels fitted as standard to protect the compressor from damage - Siphon separator - Overflow with two balls and sight glass - Pressure gauge mounted on suction assembly with protective bracket - Mechanical fill level indicator with color scale Engine and Compressor - MEC 3000 vacuum compressor with 3,500-litre air flow - Maximum vacuum: -0.8 bar (continuous operation at -0.5 bar) - Maximum overpressure: 0.49 bar - Maintenance-free V-belt drive for vacuum compressor - Industrial engine (petrol) - Electric starter, oil sensor, control panel with ignition lock, battery, and fuel tank - Internal suction hose for protection within the engine unit - Silencer for vacuum compressor with oil trap - Stainless steel heat shield above exhaust - 1 litre of biodegradable compressor oil stored in oil bottle holder - 5-litre petrol canister in holder - Standard long-neck funnel for oil changes and refilling - All engine components and accessories stored in a lockable aluminum engine box, powder-coated in desired color Chassis - Self-supporting, fully hot-dip galvanized chassis - 2.7t tandem low-loader chassis - Track width matches that of cars and Sprinters for optimal driving characteristics - Lowest possible center of gravity for tank - Two axles, each with 1,350 kg load capacity and independent suspension by a renowned manufacturer - Continuous welded V-drawbar - Robust metal mudguards with integrated lamp housing - Stake holder brackets for quickly securing suction hoses with rubber straps - Storage options for tools and accessories Suction Tank - Overrun brake with automatic reverse - Automatically securing ball coupling - Reinforced jockey wheel - 13-pin electrical connector Fittings and Hoses - 2x suction hoses (3") 5m long with Perrot couplings - 1x suction lance 3" (1,500 mm long) - 1x Perrot connection (3") at bottom of tank lid - 1x Perrot connection (3") on right side in direction of travel For more detailed information and/or photos, please contact us directly. You’ll find a wide selection of other vehicles for PURCHASE or RENT at: Specifications subject to change, prior sale, and errors excepted. The buyer is obliged to independently verify the condition and equipment of the goods. Sale is made exclusively on our general terms and conditions and with exclusion of any warranty.

Condition: used, empty load weight: 9,400 kg, maximum load weight: 30,357 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2024, loading space length: 14,703 mm, loading space width: 2,490 mm, loading space height: 2,850 mm, loading space volume: 104 m³, suspension: air, tire size: 445/45 R19,5, wheelbase: 1,310 mm, Year of construction: 2023, Equipment: ABS, Unladen weight: 9,400 kg, permissible gross weight: 39,000 kg, cargo space (L x W x H): 14,703 mm x 2,490 mm x 2,850 mm, tire size: 445/45 R19.5, cargo volume: 104 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, underrun protection, electronic braking system (EBS), ferry lashings, bolted chassis, temperature recorder, 1x15 and 2x7-pin connectors, anti-spray, customs-sealable, dynamic wheelbase adjustment (LSP), telematics system, Dynamic Ramp Protection (DRP), multifunction floor. You can find our complete range of vehicles at . Interested in financing? With our Value Added Services, we offer you individual financing options, full service and telematics solutions. We are happy to advise you. Dsdeyhh Ttopfx Afnjkh

Condition: new, empty load weight: 7,210 kg, maximum load weight: 31,790 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,625 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, loading space volume: 91 m³, suspension: air, tire size: 385/65 R22,5, Year of construction: 2026, Equipment: ABS, Unladen weight: 7,210 kg, Gross vehicle weight: 39,000 kg, Cargo space (L x W x H): 13,625 mm x 2,480 mm x 2,700 mm. Tire size: 385/65 R22.5, Cargo volume: 91 m³, 1st axle: , 2nd axle: , 3rd axle: , Air suspension, Underrun protection, Front lift axle, Electronic braking system (EBS), Ferry lashings, Bolted chassis, Portal doors, Double-deck for EURO pallets without beams, Connection plugs: 1x15-pin and 2x7-pin, Antispray, Customs sealable, Telematics system: TrailerConnect, Impact bumpers. Find our complete vehicle inventory at . Looking for financing? With our Value Added Services, we offer you customized financing solutions, full-service and telematics services. We are happy to advise you. Dkodpfx Ajyhh Tmsfneh

Condition: new, maximum load weight: 33,190 kg, overall weight: 42,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate delivery and on short notice, on our website. Excerpt from the equipment list. Complete specifications available upon request. Frame: * Standard ladder-type frame made of lightweight steel construction with through cross members * With cambered chassis frame; coupling plate approx. 8 mm thick, equipped with a 2-inch king pin according to DIN 74080 / ISO 337 Chassis: * For indivisible loads, an increased permissible gross train weight is allowed * Axle lift mechanism on axle 1 * Fully automatic, load-dependent control of axle lift * Start assist: activation via 3x braking, 30% overload up to a speed of 25 km/h * Three-axle unit with disc brakes, approx. 430 mm diameter, insertion depth approx. 120 mm * Air suspension with approx. 180 mm stroke Vehicle Tyres: * Wheels with internal sensors according to UN ECE R141 * 6x 385/65 R 22.5 UNIROYAL TH 50 tyres Chassis Attachments: * Landing legs (manufacturer according to Kögel's selection), mechanical with compensating foot, approx. 24 t lifting capacity * Single-sided operation, on the right in the direction of travel * Spray suppression system (spray mist reduction) in accordance with Regulation (EU) No. 109/2011 for tri-axle units with 385/65 R22.5 tyres, consisting of 1 pair of quarter-circle mudguards ahead of the axles, 1 pair of straight mudguards with spray flaps between axles 1 and 2, and 1 pair of quarter-circle mudguards with spray flaps behind the axles * 2 waterproof plastic toolboxes, internal dimensions approx. 545 x 400 x 400 mm, installed at the rear left and right * Retractable access ladder at the rear right * High, rigid rear underrun protection made of steel according to ECE-R58 * One pair each of extendable warning panels for overwidth loads, retro-reflective red/white, with LED lighting, spiral cable and plug connection, positioned at the front and rear sections of the vehicle Brake / Air Suspension System: * EBS system 2S/2M with stability program (includes ABS/ALB function) * EBS socket ISO 7638 (without connecting cables) * Parking brake as spring-loaded brake * External pneumatic connections as well as external EBS diagnostic connection via ISO 7638 socket * EBS system (manufacturer at Kögel's discretion) * Air suspension system including 1 lift/lower valve, mounted on the left behind the axle aggregate, driving position adjusts automatically * 2 non-interchangeable coupling heads at the front, ISO 1728 Dkedpeyg T H Nsfx Afnoh * Brake system and air supply reservoirs made of steel (EN 286-2) Floor: * Panel floor approx. 30 mm thick * Floor circumferentially sealed * Stake pockets for square insertable posts, approx. 80 x 80 mm; arrangement per drawing J9: 8 stake pocket rails (18 stake pockets per rail: 4 each on the outside + 10 in the center) Front Wall: * Storage for up to 20 square insert posts approx. 80 x 80 mm (length approx. 1,990 mm) on the inside of the front wall * Front wall approx. 2,000 mm high with steel corner posts, profiled steel plate, bolted/riveted to frame * 2 pairs of lashing points (permissible lashing force approx. 1,000 kg per ring) on the front wall, complying with EN 12640 Side Wall: * VarioFix steel punched outer frame * 21 pairs of lashing rings on the outer frame (according to EN 12640), permissible tensile force approx. 5,000 kg per ring Collision Protection: * 1 pair of steel bumpers, approx. 160 x 85 x 85 mm, mounted to the end frame plate on the outside * Trans

Condition: good (used), Technical data for pallet rack upright: Racking system: SSI Schäfer Type: PR 600 Scope of delivery includes: 01x pallet rack upright, used Material color: sendzimir galvanized Upright type: P215 Profile dimensions: 120 x 100 x 2.50 mm Incl. cross and diagonal braces, upright protectors and base plates Uprights are pre-assembled (bolted truss construction) Height: 14,100 mm Depth: 1,050 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Should you require transport or shipping for this item, additional costs will be incurred, which can be requested from us depending on the place of delivery and scope of delivery. Djdsycgd Hjpfx Afnskh

Condition: good (used), 1 used universal milling head for retrofitting to conventional, NC, or CNC milling machines or boring mills of any kind, "HURON" type, swiveling over 2 axes, every angle adjustable Taper: ISO 50 Projection: approx. 360 mm Nominal drive power: 10 HP Max. speed: 1800 rpm Weight: approx. 82 kg Accessories / Special features: • Manual tool clamping • The main spindle and all shafts and gears are made from case-hardened and tempered chrome-nickel steel • 2 mutually rotatable axes, allowing any setting angle! “HURON” system • Taper gears ground according to the „KLINGELNBERG“ system Dodpfjyc Ei Ujx Afnokh • The main spindle's rolling bearings are made of high-precision tapered roller bearings • 1 tool draw bolt Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), Technical data for the pallet racking system: Racking system: Nedcon Type: NS Technical data for installation: Number of racking rows: 01 unit Length per racking row: 14,100 mm Number of bays per row: 05 units Number of levels incl. ground level: 05 units Technical data on capacity: Pallet spaces per bay: 18 units Number of pallet spaces per row: 90 units Total number of pallet spaces: 90 units Based on: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Max. weight per pallet: 1,000 kg Scope of delivery includes: 06x pallet rack uprights, used Material color: cream white Frame profile: 1007825 Profile dimension: 100 x 78 x 2.5 mm Adjustment grid: 50|50 mm Incl. horizontal and diagonal braces, foot plates The uprights are pre-assembled (bolted lattice design) Upright height: 9,000 mm Upright depth: 1,100 mm 50x pallet rack beams, new Material color: RAL 2008 light red orange Box profile: 110 x 40 mm Beam type: CC1104015A Steel quality: 275 MPa Connector type: PR2-4HK40 L 198 mm Weld-on height: 40.00 mm Clear span: 2,700 mm Max. load per pair of beams: 3,000 kg (with evenly distributed load) 100x safety pins, new Material finish: sendzimir galvanized For securing the longitudinal beams against unintentional lifting 24x anchor bolts, new Manufacturer: Hilti Model: HST2 M12x105/10 Specification: carbon steel, galvanized Approved for: cracked concrete 12x leveling plates, used Specification: fully galvanized For leveling the racking uprights installed on uneven floors 01x load sign With details regarding bay and shelf loads, manufacturer, and order number Dimensions: 420 x 297 x 3 mm Dkjdpeyb Ib Dsfx Afneh Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Transport or shipping beyond this is associated with additional costs, which can be requested separately from us depending on the delivery location and scope of delivery.

Condition: used, empty load weight: 9,537 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 05/2017, loading space length: 13,410 mm, loading space width: 2,490 mm, loading space height: 2,700 mm, loading space volume: 90 m³, suspension: air, tire size: 385/65 R22,5, color: white, Year of construction: 2017, Equipment: ABS, Unladen weight: 9,537 kg, permissible total weight: 42,000 kg, cargo space (L x W x H): 13,410 mm x 2,490 mm x 2,700 mm. Tire size: 385/65 R22.5, cargo space volume: 90 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, underrun protection, front lift axle, pallet box, electronic braking system (EBS), toolbox, piggyback version, ferry lashings, bolted chassis, rear portal doors, ISO bulkhead without fan, temperature recorder, double-deck for EURO pallets without beams, hubodometer, connectors: 1x15-pin and 2x7-pin, anti-spray system, international customs lock. You can find our entire range of vehicles at . Interested in financing? With our Value Added Services, we offer you individual financing solutions, full-service and telematics services. We are happy to advise you. Dkodpoyg S Rmofx Afnoh

Condition: used, empty load weight: 9,537 kg, maximum load weight: 26,463 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 05/2017, loading space length: 13,410 mm, loading space width: 2,490 mm, loading space height: 2,700 mm, loading space volume: 90 m³, suspension: air, tire size: 385/65 R22,5, color: white, Year of construction: 2017, mileage: 250,272 km, Equipment: ABS, Unladen weight: 9,537 kg, Gross vehicle weight: 36,000 kg, Cargo area (L x W x H): 13,410 mm x 2,490 mm x 2,700 mm. Tire size: 385/65 R22.5, Cargo volume: 90 m³. 1st axle: , 2nd axle: , 3rd axle: , Air suspension, underrun protection, front lift axle, electronic braking system (EBS), toolbox, piggyback version, ferry lashings, bolted chassis, rear portal doors, ISO partition wall without ventilation, temperature recorder, double-deck for EURO pallets with beams, hubodometer, 1x15-pin and 2x7-pin connectors, antispray, international customs lock, telematics system, multifunction floor. You can find our full range of vehicles at . Looking for financing? With our Value Added Services we offer you individual financing solutions, full service and telematics services. We are happy to advise you. Dsdpjyg S Rgsfx Afnekh