Used Bmt for sale (125)

Condition: used, functionality: fully functional, machine/vehicle number: 10389, Year of construction: 2016, operating hours: 5,133 h, load capacity: 5,000 kg, lifting height: 5,500 mm, fuel type: electric, mast type: simplex, construction height: 3,620 mm, drive type: Elektro, Electric 4-wheel forklift Chassis number: 10389 Knodpfjxdqymex Afkoa Mast type: Standard Condition: Ready for operation and fully functional Technical condition: good Front tires type: Superelastic Rear tires type: Superelastic Battery voltage: 80V Sideshifter, fork positioner, 3rd valve, 4th valve, windscreen, full cabin, interior mirror, windscreen wiper,

Condition: used, functionality: fully functional, machine/vehicle number: 8FBMT50-11163, Year of construction: 2018, operating hours: 4,402 h, load capacity: 5,000 kg, lifting height: 5,500 mm, fuel type: electric, mast type: simplex, construction height: 3,620 mm, fork carriage width: 1,700 mm, drive type: Elektro, Electric 4-wheel forklift Chassis number: 8FBMT50-11163 Load center: 600 mm Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Good Front tire type: Superelastic Rear tire type: Superelastic Battery voltage: 80V Knodpfx Afjxc A Dnskoa Sideshift, fork positioner, 3rd valve, 4th valve, front windshield, interior mirror, windshield wiper,

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 8,916 h, load capacity: 2,500 kg, lifting height: 6,500 mm, fuel type: electric, mast type: triplex, construction height: 2,850 mm, drive type: Elektro, Electric 4-wheel forklift truck Load centre: 500 Mast type: Triplex Condition: Ready for operation and fully functional Knsdoyw U Tgspfx Afkea Technical condition: good Tyre type front: Superelastic Tyre type rear: Superelastic Battery voltage: 80V Sideshift, fork positioner, 3rd valve, 4th valve, front windshield, full cabin, interior mirror, wiper,

Condition: used, functionality: fully functional, machine/vehicle number: 11237, Year of construction: 2016, operating hours: 8,585 h, load capacity: 5,000 kg, lifting height: 5,500 mm, fuel type: electric, mast type: simplex, construction height: 3,620 mm, drive type: Elektro, Electric 4-wheel forklift Chassis number: 11237 Load center: 600 Mast type: Standard Condition: Ready for operation and fully functional Kjdpfxsxdqyao Afksna Technical condition: good Front tire type: Superelastic Rear tire type: Superelastic Battery: 80V Sideshifter, fork positioner, 3rd valve, 4th valve, front windscreen, heater, full cabin, interior mirror, windshield wiper,

Condition: new, Year of construction: 2025, hydraulic CNC bending machine - order machine (delivery time approx. 10-14 weeks), incl. hydraulically dynamic camber, touchscreen, Kodpfeg Avfkox Afksna pressure regulation of the upper beam, backgauge (1000mm), goat feet with automatic tool clamping, electric/hydraulic adjustment of the bending beam -images similar-

Condition: new, Year of construction: 2025, hydraulic CNC bending machine - order machine (delivery time approx. 10-14 weeks), incl. hydraulically dynamic camber, touchscreen, Kodjg Avglepfx Afkjna pressure regulation of the upper beam, backgauge (1000mm), goat feet with automatic tool clamping, electric/hydraulic adjustment of the bending beam -images similar-

Condition: refurbished (used), battery capacity: 750 Ah, battery voltage: 48 V, total height: 650 mm, total length: 984 mm, total width: 630 mm, Tested forklift battery for your truck – 48V 6PZS 750AH – Special tray + 1 year warranty + Includes Aquamatik battery watering system + Includes terminal discharge cable & REMA 320 plug (other connectors can be installed upon request) + Capacity: at least 90-100% (C5 capacity test protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length: 984 mm Width: 630 mm Height: 650 mm Weight: approx. 1,050 kg Suitable for the following models and more: Still FM 20 Jungheinrich EFG 220 Jungheinrich EFG 316 Jungheinrich EFG 318 Jungheinrich EFG 320 Jungheinrich EFX 413 Jungheinrich EKX 410 Jungheinrich ESE 533 Toyota 8FBE16T Toyota 8FBE18 Toyota 8FBE18T Knodjy Rnt Hopfx Afksa Toyota 8FBMT16 Toyota 8FBMT18 Toyota 8FBMT20 Crown SCT 60 Atlet EF 180 Atlet EF 200 Atlet ET 180 Atlet ET 200 Atlet UHS Baumann EX 25-40 Caterpillar EP-FB18 Caterpillar EP-FB20 Caterpillar EP16 Caterpillar EP16/18PNT Caterpillar EP18 Caterpillar EP18/20 Caterpillar EP18/20KT Caterpillar EP18/20NT Caterpillar EP18KT Caterpillar EP18PNT Caterpillar EP20 Caterpillar EP20KT Caterpillar EP20PN Caterpillar EP20PNT Caterpillar F35 Daewoo B16 X Daewoo B16 X-5 Daewoo B18 T Daewoo B20 T Doosan B16X Doosan B16X-7 Doosan B18-5 Doosan B18T-7 Doosan B18T-AC Doosan B18X-5 Doosan B20T-7 Doosan B20T-AC Doosan B20T/X Doosan B20X-7 Doosan BT18T Doosan BT18T-5 Hyster H1.75XM Hyster J2.0XMT Hyundai 18BT-9 Hyundai 20B-9 Hyundai 20BT-7 Komatsu FB18 Komatsu FB20 Mitsubishi FB16 Mitsubishi FB16PNT Mitsubishi FB18KT Mitsubishi FB20KC Mitsubishi FB20KT Mitsubishi FB20NT Mitsubishi FB20PNT Nichiyu FB20P-60BC Nissan G1N1 Nissan G1N1L18 Nissan G1N1L18Q Nissan G1N1L18U Nissan GN01L18U Nissan GN1L16U Nissan TX16 Nissan TX18L Nissan TX20 Nissan TX20L Nissan TX4-18 Steinbock-Boss KE 20 UniCarriers TX4-20 Utilev UT20PTE Yale ERC 18 Yale ERC 20 Yale ERP 16 ATF Yale ERP 18 Yale ERP 18 ATF Yale ERP 20 Yale ERP 20 ATF Common battery sizes available, feel free to inquire. Transport available.

Condition: used, functionality: fully functional, machine/vehicle number: 1565, Meteor 12 winding machine Winding diameter: 60 x 80 mm Wire: 0.01 - 0.4 mm Kjdpfx Afeyln Sdjkona

Condition: used, functionality: fully functional, machine/vehicle number: 2482148, Year of construction: 2019, load capacity: 4,990 kg, lifting height: 5,000 mm, free lift: 140 mm, load center: 600 mm, fuel type: electric, construction height: 4,156 mm, power: 25.2 kW (34.26 HP), motor manufacturer: Toyota, battery capacity: 840 Ah, battery voltage: 80 V, battery weight: 2,178 kg, fork carriage width: 1,170 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 60 mm, turning radius (outer): 2,686 mm, front tire type: cushion tires (black), front tire size: 28x12,5-15, rear tire type: cushion tires (black), rear tire size: 23x9-10, overall weight: 7,721 kg, total height: 2,500 mm, total length: 4,272 mm, total width: 1,440 mm, color: red, Equipment: UVV, pallet forks, Technical data Year of manufacture: 2019 Drive: electric Motor: 25.2 kW Load capacity: 4.99 t Load center: 600 mm Overall dimensions (L x W x H): 4.27 m x 1.44 m x 2.50 m Fork dimensions (L x W x H): 1.20 m x 0.150 m x 0.060 m Turning radius: 2.68 m Weight: 7721 kg Front tyre size: 28x12.5-15 Rear tyre size: 23x9-10 Kedpfx Aeyqzpaofkena Lifting height: 5.00 m Free lift: 140 mm Travel speed: 18 km/h Max. gradeability with/without load: 13%/23% Mast height extended: 4.15 m Fully operational, general signs of use, UVV inspected

Condition: used, functionality: fully functional, machine/vehicle number: 2482088, Year of construction: 2019, load capacity: 4,990 kg, lifting height: 5,000 mm, free lift: 140 mm, load center: 600 mm, fuel type: electric, construction height: 4,156 mm, power: 25.2 kW (34.26 HP), motor manufacturer: Toyota, battery capacity: 840 Ah, battery voltage: 80 V, battery weight: 2,178 kg, fork carriage width: 1,170 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 60 mm, ground clearance: 150 mm, turning radius (outer): 2,686 mm, front tire type: cushion tires (black), front tire size: 28x12,5-15, rear tire type: cushion tires (black), rear tire size: 23x9-10, overall weight: 7,721 kg, total height: 2,500 mm, total length: 4,272 mm, total width: 1,440 mm, color: red, Equipment: UVV, pallet forks, Technical data Year of manufacture: 2019 Drive: electric Motor: 25.2 kW Load capacity: 4.99 t Load center: 600 mm Overall dimensions (L x W x H): 4.27 m x 1.44 m x 2.50 m Fork dimensions (L x W x H): 1.20 m x 0.150 m x 0.060 m Turning radius: 2.68 m Weight: 7721 kg Front tyre size: 28x12.5-15 Rear tyre size: 23x9-10 Lifting height: 5.00 m Free lift: 140 mm Travel speed: 18 km/h Max. gradeability with/without load: 13%/23% Mast height extended: 4.15 m Ksdpfx Afoyqzn Ajkjna Fully operational, general signs of use, UVV inspected

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 4,701 h, load capacity: 2,500 kg, lifting height: 4,000 mm, fuel type: electric, mast type: duplex, construction height: 2,850 mm, fork length: 1,600 mm, drive type: Elektro, Electric 4-wheel forklift Kodpfx Aey Ab Tkofkona Load centre: 500 Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: very good Front tyre type: Superelastic Rear tyre type: Superelastic Battery voltage: 80V Battery capacity: 775Ah Battery year of manufacture: 2021 Reach fork, sideshift, fork positioner, 3rd valve, 4th valve, front working lights, roof cover, safety light, LED.

Year of construction: 2026, condition: new, Bosporas Machinery | AYIKA is a manufacturer of coil processing lines, roll forming lines and press feeding systems, offering high-quality and customized industrial solutions. High-performance heavy-duty cut to length line designed for precise sheet cutting with advanced configurations and up to 20-ton coil capacity. TECHNICAL DETAILS Sheet Thickness: 0.5 – 3 mm / up to 4 mm (heavy-duty configuration) Coil Width: up to 1500 mm Coil Weight: up to 20 tons Cutting / Shear Type: Gear Driven Guillotine Shear, Pneumatic Clutch Eccentric Shear, Hydraulic Shear, Rotary Shear Line Speed: up to 40 m/min (depending on configuration) Leveling System: Multi-Rollers Fine Straightener, Precision Straightener (Leveler) Stacking System: Automatic stacker (single or double stack option) Material Type: CR, HR, Galvanized, Stainless Steel, Aluminium, Hot Rolled Steel, Cold Rolled Steel Knodpfoyy R Rmex Afkea This heavy-duty cut to length line is designed for precise and efficient processing of steel coils with widths up to 1500 mm and coil weights up to 20 tons. The system ensures high accuracy, stable operation and long-term reliability in industrial production environments. The line consists of integrated units including hydraulic decoiler, coil loading system, leveling unit, feeding system, cutting unit, conveyor system and automatic stacking unit. CONFIGURATION & FLEXIBILITY The system can be configured based on production requirements and material specifications: 0.5 – 3 mm standard duty configuration up to 4 mm heavy-duty configuration Different cutting technologies can be applied depending on production speed, accuracy and material type: Gear Driven Guillotine Shear Pneumatic Clutch Eccentric Shear Hydraulic Shear Rotary Shear The line can also be designed with single or double loop pit systems to optimize line speed, material flow and plant layout. KEY FEATURES Heavy-duty design for 20-ton coils High precision sheet cutting Advanced leveling system for flatness control Cutting options Automatic stacking and conveyor systems Robust mechanical structure for long service life ENGINEERING & PERFORMANCE The machine is built with a robust mechanical structure and high-quality components to ensure long-term operation under heavy-duty conditions. The precision leveling system eliminates internal stresses and improves flatness, enabling accurate and repeatable cutting results. Advanced automation and control systems provide stable operation, reduced operator dependency and efficient production management. OPERATIONAL ADVANTAGES Short lead time compared to European manufacturers High production efficiency and continuous operation Low maintenance requirements Flexible and customizable design Reliable performance in demanding industrial conditions APPLICATION AREAS Steel service centers Automotive and metal component production Construction and infrastructure materials General sheet metal processing OPTIONAL EQUIPMENT Double stacker system Vacuum stacking system Coil handling and transfer systems Advanced automation solutions *Images included in this listing show reference installations of similar cut to length lines (3 mm and 4 mm thickness ranges) successfully manufactured and commissioned in recent years across different countries. These references demonstrate our proven engineering capability, reliable manufacturing quality and international project experience.

Condition: used, Year of construction: 2012, Technical details: turning diameter: 420 turning length: 1230 mm swing over bed: 700 mm Knedpfx Afst Acy Ajkea swing diameter over slide rest: 550 mm centre distance: 1390 mm y-axis: +/- 60 mm turning speeds: 3500 1/min turret (x-stations): 12 power capacity: 22 / 18,5 kW : 1 / 12 x BMT rapid traverse x + z axis: 20 / 24 m/min : 76 mm total power requirement: 50 kVA weight: 7,8 t dimensions of the machine ca.: 4,10 x 2,05 x 2,21 m CNC lathe with Y-Axis and driven tools, C-axis, tool eye, hydraulic 3-chaw-juck D= 250 mm, reinforced pump 15 bar, pressure-compensated clamping cylinder , 2 step clamping pressure, prepared for steady (without steady), progr. tailstock (dragging device), live tool device (3,7 kW, 3.000 rpm), chipconveyor, 1 pcs. live tool included approx. 15.500 working hours *

Condition: used, mileage: 40,760 km, power: 84 kW (114.21 HP), first registration: 11/2021, fuel type: gasoline, overall weight: 2,150 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), INTERNAL VEHICLE NUMBER: M613----VW CADDY 1.5 TSI BMT AUTOMATIC EURO 6d----MILEAGE: 40,760 KM, SERVICE HISTORY AVAILABLE LAST INSPECTION WITH OIL CHANGE ON 09/02/2025 AT 37,857 KM ALL INSPECTIONS WERE CARRIED OUT IN A MANUFACTURER-AUTHORIZED WORKSHOP VEHICLE HISTORY AVAILABLE IN DIGITAL FORMAT 1ST OWNER----AUTOMATIC TRANSMISSION----VEHICLE WITH FULL GLASS PANORAMIC ROOF----SLIDING DOOR ON BOTH SIDES----LIKE-NEW M+S TIRES----* CRUISE CONTROL * AIR CONDITIONING * AUTO HOLD * DRIVER FATIGUE DETECTION * MULTI-COLLISION BRAKE * EMERGENCY BRAKE ASSIST * START/STOP SYSTEM * AUTOMATIC LIGHT ADJUSTMENT ----* MULTI-FUNCTION LEATHER STEERING WHEEL * HEATED SEATS * VOICE CONTROL * BLUETOOTH HANDS-FREE SYSTEM * USB-C * TOUCHSCREEN * ON-BOARD COMPUTER * APPLE CARPLAY * ANDROID AUTO * ELECTRICALLY ADJUSTABLE AND HEATED EXTERIOR MIRRORS * ELECTRIC WINDOW LIFTS * 180° REAR DOORS * PARTITION WITH GLASS * LED INTERIOR LIGHTING * HEATED REAR WINDOW * LOW EMISSIONS COMPLIANT WITH EURO 6d EXHAUST STANDARD ----Special equipment: * Audio system Composition Audio (touchscreen color display, 2 speakers) * Exterior mirrors, electrically adjustable and heated * Floor covering passenger/cargo area (rubber) * Floor covering front (rubber) * Window package with rear wing doors * Interior mirror with automatic anti-glare function * Cargo area partition, high, with window * Digital radio reception (DAB+) * Wheel covers, hubcaps * Smoker's package * Tires: All-weather/all-season tires 16" * Sliding door, left * Front heated seats * Special paint finish Candy White solid * Steel rims 6.5x16 (black) Additional equipment: Knsdpfxoy Sdzio Afkoa * Airbag for driver/front passenger side * Front passenger airbag can be deactivated * Automatic headlight control (ALS) * Exterior mirrors and door handles in black, unpainted * Cover for sliding door rail, silver * Roof rack/roof carrier preparation * Electronic stability program (ESP) with brake assistant * ASR/ABS, EDS, MSR * Driver assistance system: Multi-collision brake * Driver assistance system: Driver fatigue detection * Windshield, laminated, tinted * Remote control key (2), foldable * Speed control system (cruise control) including speed limiter * Front cupholders * Glove compartment, open * Rear lights, standard * Interior: Decorative inserts, matte * Interior lights in cargo/passenger compartment: 1 piece * Body type/structure: Panel van * Steering wheel (leather) with multi-function and gearshift function * Steering column (steering wheel) mechanically adjustable * Height/longitudinal adjustment * Headlight range control * Commercial vehicle registration * Engine 1.5 L, 84 kW 16V TSI * Emergency call system * Parking brake, electric, with Auto-Hold function * Low emissions, compliant with Euro 6d exhaust standard * Windshield wiper with intermittent function and light sensor * Sliding door, right * Safety belts, front, with pre-tensioner, height-adjustable * Front seat, left, height-adjustable * Seat cover/upholstery: Fabric Double Grid * Sun visors without mirror * Start/stop system * Door seals with dust protection * Door panel, plastic * First aid kit and warning triangle * Interior trim in cargo/passenger compartment: Standard * Tie-down points in luggage/cargo area * Warning system for safety belts, front * Heat-insulating tinted glass (side / rear) * Front heated seats ----If desired, we can retrofit the vehicle with a trailer hitch. Professional installation - quick and reliable, starting from 599 €. ++ Exclusive promotion at

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 565 mm, spindle motor power: 22,000 W, total height: 2,300 mm, total width: 2,100 mm, overall weight: 6,000 kg, product length (max.): 3,900 mm, number of axes: 3, This 3-axis Okuma LB3000 EX was manufactured in 2008. It features a maximum turning diameter of 340 mm and a distance between centers of 1020 mm. The machine is equipped with a powerful OSP-P200 control system and offers a spindle speed range of 45–5000 rpm. If you are looking to get high-quality turning capabilities, consider the Okuma LB3000 EX horizontal turning machine we have for sale. Contact us for further details. • Control system OSP-P200 • 12-station tool turret radial • Revolver 12 driven tools • Number of revolvers 1 • Tool holder BMT 60 • Number of tools 12 • Number of tools available approx. 200 • Driven tool stations power 7.1 kW • Driven tool torque 40.4 Nm • Driven tool speed range 45–6000 rpm • C-axis included • Sub-spindle with W-axis • Main spindle bore 110 mm • Spindle bore 80 mm • Spindle nose A2-11 • Spindle speed range 28–2800 rpm • Spindle speed 45–5000 rpm • Main spindle drive 22/15 kW • Power at 40% duty cycle 22 kW • Maximum turning diameter 340 mm • Distance between centers 1020 mm • Programmable chuck pressure (2 levels) • Thread milling interpolation X/Y and Z/Y axes • Workpiece catcher programmable • Chip conveyor with integrated coolant tank • Paper band filter system heavy-duty • Coolant tank capacity 480 l • Coolant pump 40 l/min at approx. 20 bar • Coolant pump type Brinkmann TH 90/690-FSI • Extraction connection diameter 200 mm • Hollow clamping cylinder bore 110 mm • Power chuck FORKARD QLC-KS 250-101 Z8 • Chuck bore 101 mm • Drawtube for spindle max. 100 mm • Collet chuck Hainbuch Axfix 100 • Clamping range 42–100 mm • Manual collet change device • Sub-spindle stroke 150 mm Kjdpfey Aaxrox Afkjna • Bar feeder interface • Short bar loader IRCO ILS RBK • Bar capacity diameter 5–100 mm • Spindle reduction tube diameter 90 mm length 1500 mm • Chip disposal conveyor PVC with PU coating • Hydraulic clamping cylinder bore 52 mm • Machine dimensions 3.9 m x 2.1 m x 2.3 m • Machine weight 4000–6000 kg • Maintenance contract yes • Utilization highOPTIONAL for an additional charge: Approx. 200 tools availableElectrical maintenance was carried out 1.5 years ago. During this work, some electrical components were replaced or cleaned Technical Specification Counter Spindle Yes Driven Tools Yes

Year of construction: 2019, condition: ready for operation (used), A simultaneous turning center Spinner with three turrets and extensive accessories, spare parts and tools is available. Travel X1/X2/X3: 180mm, travel Y1/Y2: +/-45mm, travel Z1/Z3: 704mm, travel Z2/E2: 620mm/720mm, rapid traverse X/Y/Z: 30m/min, acceleration: 0.5g. Spindle 1: Speed: 5000rpm, nose: A6, bore: 65mm, chuck diameter: 210mm, power: 18kW, torque: 115Nm. Spindle 2: Speed: 700rpm, nose diameter: 110mm, bore: 42mm, max. chuck diameter: 140mm, max. chuck jaw weight: 1.25kg, power: 16.6kW, torque: 100Nm. Turret 1/2/3: Turret stations: 3x12, speed: 8000rpm, tool holder: BMT 45, power: 4.3kW, torque: 13.6Nm. Machine dimensions X/Y/Z: approx. 2880mm/2130mm/1990mm, weight: approx. 7500kg, operating hours: 27102h, control: Fanuc 31i. Including loading magazine Top Automazioni, cooling/high pressure system with 80bar, chip conveyor, fire extinguishing system, a comprehensive tool package and other spare parts. Documentation available. On-site inspection is possible. Knsdpfx Ajua E Trofksa

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 4,500 rpm, travel distance X-axis: 205 mm, travel distance Y-axis: 30 mm, travel distance Z-axis: 340 mm, spindle motor power: 15,000 W, total height: 1,693 mm, total width: 1,595 mm, controller manufacturer: FANUC, controller model: 0i-F Plus, product length (max.): 2,350 mm, number of axes: 4, This 4-axis DN SOLUTIONS LYNX 2100MB was manufactured in 2022. As new, showroom model. It features a maximum spindle speed of 4,500 RPM and a possible chuck size of up to 8" (204 mm). The machine is equipped with a tool turret with 12 stations and a bar capacity of 65 mm. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS LYNX 2100MB horizontal turning machine we have for sale. Contact us for further details. • As new, showroom model • Chuck size possible : 8" (204) No chuck included • Bar capacity: 65 mm • Y travel: 30 / 36 mm • Turret stations: 12 • Turret interface: BMT 45 • Guideway type: Linear guideway • Cooling system: Coolant pump 7 bar • Design: High-performance compact turning center with a space-saving design • Productivity: Fast idle times; tool turret with BMT interface • Application: Suited for producing small parts with high precision Additional equipment • Bar feeder interface • Chip conveyor • Parts catcher • Tool setter (electric) • Oil skimmer • 3-color signal light • Optional: Chip conveyor (hinge belt conveyor). Price on request • Machine is supplied with a standard basic package: turret fully equipped, base holder included.Optional: • 2 pcs. External turning tool holder BMT45 20x20 single (500-0665) • 1 pc. Facing tool holder BMT45 20x20 left/right (500-0668) • 1 pc. External turning tool holder BMT45 20x20 double left (500-0675) • 1 pc. Parting tool holder BMT45 20x20 single (500-0671) • 2 pcs. Internal turning tool holder BMT45 Ø32 single left (500-0680) • 1 pc. Internal turning tool holder BMT45 Ø20 triple (500-0678) • 1 pc. Cover IK (500-0642) • 1 pc. Reducing sleeve set Boring • 1 pc. Reducing sleeve set Boring • 1 pc. Reducing sleeve set U Drill • 1 pc. Reducing sleeve set OD 32 ID 20/25 (500-0710) • 1 pc. PRECI-FLEX adapter set PRECI-FLEX ER20 (BMT 45P) (500-0524) • 2 angled externally cooled Eppinger AGWs • 2 straight externally cooled Eppinger AGWs Technical Specification Counter Spindle No Kjdpfx Asyrt E Njfkena Driven Tools No

Condition: used, mileage: 67,000 km, power: 90 kW (122.37 HP), first registration: 01/2022, fuel type: diesel, overall weight: 2,350 kg, next inspection (TÜV): 05/2028, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, total length: 4,500 mm, total width: 1,855 mm, total height: 1,838 mm, loading space length: 1,790 mm, loading space height: 1,190 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, VW Caddy BMT 4Motion/All-Wheel Drive, Latest Model, 90 kW TDI with Optimal Equipment, Shelf System and Tailgate Workshop / Shelf Installation by ALUCA (details below) All-wheel drive (4Motion, 4M, 4x4, 4WD) Underride guard for engine and transmission made of plastic Detachable tow bar (AHK) with 1,500 kg towing capacity Stationary heater / additional heater, programmable and remote-controlled Heated seats (driver and passenger) 2-zone automatic climate control with dust and pollen filter Driver assistance systems / assistance package: - Rear park distance control (PDC), visual and acoustic indicators - Reverse camera - Area monitoring system (Front Assist) with City Emergency Braking - Adaptive Cruise Control (ACC) - Cruise control with automatic distance regulation (ACC) and speed limiter - Traffic sign recognition - Tire pressure monitoring display - Trailer stabilization - Driver fatigue detection - Hill-start assist - Brake assist and multi-collision brake - ABS, ASR, ESP, EDS (electronic differential lock) Light and Vision Package: - Automatic headlights - Rain-sensing wipers Leather multifunction steering wheel Leather gear lever and handbrake grip Discover Media audio-navigation system (touchscreen color display) - Radio (DAB+/FM/AM), CD player (CD, SD slots in glovebox) - USB, AUX-in, SD card, Bluetooth audio - Streaming & Internet - Bluetooth hands-free system - Mobile online services Car-Net - App-Connect (Android Auto and Apple CarPlay) - Voice control (for radio, navigation, media, phone) Multifunction display Plus / onboard computer 4 airbags (passenger airbag deactivatable): - Front airbags - Side airbags with head airbag unit Electrical package: - Electric windows - Electrically adjustable and heated exterior mirrors Climatized and illuminated glovebox Central locking with remote control and safe lock Heated washer jets Roof rails Alarm system Body-colored bumpers BlueMotion Technology SCR system (AdBlue technology) High load compartment partition wall with window Glazed rear wing doors, tinted, heated, rear wiper, 180° opening angle Right sliding door with dark tinted window Wheelbase 2,755 mm, L1 Adjustable steering wheel Driver’s seat ErgoComfort with fold-down armrests on both sides, multiple adjustments: seat height, backrest, lumbar support (including electric lumbar support) Knodpfx Afezl U Epekoa Front passenger single seat, multiple adjustments: seat height, backrest, lumbar support Top sports seats, fabric upholstery Rubber floor covering and rubber mats in the cab Roof lining with storage shelf Commercial vehicle registration: Truck N1, VAN Non-smoker package Tire repair kit Heat-insulating glazing Load compartment equipment with tailgate: Workshop shelving by Aluca (similar to Bott, Sortimo, Würth). Shelving unit with storage compartment, tool/small parts cases (ALU) on the left. Right side: shelving with fold-out vice. Heavy-duty wooden floor. Load securing via lashing eyes and securing rails. Side panels partially lined with hardboard. Ventilation. Load compartment dimensions (approx.): Length: - bottom: 179 cm - mid/top: 166 cm (due to partition and rear slope) Height: 119 cm Tyres fitted: Summer tyres 205/60 R 16 on steel wheels, hubcaps, approx. 5 mm tread depth Additional tyres: Winter tyres 205/60 R 16 on steel wheels, approx. 5 / 5 / 5 / 5 mm tread depth Service history (according to lease documents): 08/2023 at 29,412 km: Inspection with oil change 03/2025 at 60,020 km: Inspection with oil change, all-wheel clutch o

Condition: used, TECHNICAL DETAILS - Number of axes : 4 - Number of spindles : 1 - Number of turrets : 1 MAIN SPINDLE - Spindle nose : A2-8 - Spindle power : 18,5 [kW] - Spindle speeds : 4.000 [rpm] - Max. bar diameter : 80 [mm] - Max. machining length : 728 [mm] - Max. turning diameter : 460 [mm] - C axis indexing precision : 0,001 [°] TURRET - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 260/795 [mm] - Y stroke : +/- 50 [mm] - Tool type : BMT - Live tools speed : 6000 [rpm] TAILSTOCK - Tailstock type : Numérique - Type of cone : CM5 - Tailstock stroke : 650 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 39 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3.110 x 1.922 [mm] - Machine height : 2.120 [mm] - Machine weight : 6.100 [kg] MACHINE HOURS - Number of hours under power : 26654 [h] - Number of working hours : 15488 [h] EQUIPMENT - CNC : CELOS - Interactive programming : MAPPS 4 - Interface : USB, PCMCIA, RJ45, RS232 - Tool probe : Renishaw - Coolant tank * with high-pressure pump : 15 [bars] Kjdpsx Tvklefx Afksna - Chips conveyor - Tool probe - Parts catcher - Parts conveying strip - Bar loader : LNS QUICK LOAD SERVO 80 S2 - Number of fixed tool holders : 9 - Number of turning tool holders : 3 - Electric transformer - Collet chuck

Condition: used, TECHNICAL DETAILS - Number of axes : 6 - Number of spindles : 2 - Number of turrets : 1 MAIN SPINDLE - Spindle nose : A2-8" - Spindle power : 18.5 [kW] - Spindle speeds : 4000 [rpm] - Max. bar diameter : 90 [mm] - Max. turning diameter : 460 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle nose : A2-6" - Spindle power : 11 [kW] - Spindle speeds : 6000 [rpm] - C axis indexing precision : 0.001 [°] TURRET 1 - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 260/795 [mm] - Y stroke : +/-50 [mm] - Tool type : BMT - Live tools speed : 10000 [rpm] - Live tools power : 5.5 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 41 [kW] MACHINE HOURS - Number of hours under power : 21392.8 [h] Knodpfx Aex H Atyefkoa - Number of working hours : 13797 [h] EQUIPMENT - CNC : CELOS - Interface : Ethernet / RS232 / USB / PCMCIA - Interactive programming : MAPPS V - 3 colors status lamp - Coolant tank : KNOLL * with high-pressure pump : 70 [bars] * with paper filtering unit - Tailstock option with counterspindle - Chips conveyor - Tool probe - Parts catcher - Parts conveying strip - Bar loader : LNS QUICKLOAD - Electric transformer - Number of turning tool holders : 2 - Number of fixed tool holders : 10 - Collet chuck

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 495 mm, travel distance Z-axis: 780 mm, spindle motor power: 37,000 W, spindle speed (max.): 2,000 rpm, total height: 3,636 mm, total width: 2,860 mm, controller manufacturer: FANUC, controller model: 0i-F Plus iHMI-Touch, product length (max.): 2,005 mm, number of axes: 3, This 3-axis DN SOLUTIONS PUMA V8300MR vertical turning machine was manufactured in 2023. As new, showroom model. It features a maximum turning diameter of 830 mm and a turning length of 690 mm. The machine is equipped with a powerful spindle offering 2,592 Nm of torque and a rapid traverse of 20 m/min. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS PUMA V8300MR machine we have for sale. Contact us for further details. • Condition: Showroom machine, like new • Chuck size (main spindle): up to 15" (380 mm) (not included) • Bar capacity: 60 mm • Rapid traverse (X/Z): 20 / 20 m/min • Spindle torque: 2,592 Nm • Max turning diameter: 830 mm • Max turning length: 690 mm • Tool stations: 12 • Tool holder: BMT 75P • Guideway type: Box guideway • Monitor size: 19" Knedpfx Ajyrr Rwefkea • Main features: • Powerful, very compact vertical turning center • Standing spindle; optimal crane loading and operator accessibility • Extremely rigid cast bed • High torque main spindle • Compact machine design • Optionally driven tools with high torque (possible) • High-quality, robust box guideways • Rapid traverse up to 20 m/min Additional equipment • Coolant pump, 10 bar • Oil skimmer • 3-color warning light • Optional: Chip conveyor (hinge belt conveyor). Price on request • Machine is delivered with standard basic package: Turret fully equipped, base holder included. Technical Specification Driven Tools No

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, CNC Fanuc Series Max. turning diameter on the machine bed: 780 mm Max. turning diameter on the carriage: 630 mm Max. turning diameter: 406 mm Max. turning length: 520 mm Bar passage: 65 mm Spindle nose: ASA A2-6 Spindle bore: 52 mm Spindle speed: 5000 rpm Spindle motor power: 18.5 kW Tailstock bore: 45 mm Tailstock nose: ASA A2-5 Bellegrandi tool holders on the spindle and tailstock + 2 self-centering chucks X-axis travel: 260 mm Z-axis travel: 590 mm Y-axis travel: +102 - 51 mm Knsdjyiu Dnopfx Afkoa B-axis travel: 590 mm Rapid traverse rate for X/Z/B axes: 30 m/min Rapid traverse rate for Y-axis: 10 m/min Turret type: BMT Number of turret stations: 12 Rotation speed of powered tools: 5000 rpm Dimensions: 3530x1863 mm, H=2163 mm Weight: 5900 kg No. 10 tool holders for powered tools.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 100 h, functionality: fully functional, turning diameter over cross slide: 600 mm, turning length: 548 mm, turning diameter: 460 mm, spindle bore: 88 mm, spindle speed (max.): 3,400 rpm, spindle speed (min.): 30 rpm, travel distance X-axis: 310 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 620 mm, spindle motor power: 24 W, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 24 m/min, rotational speed (min.): 30 rpm, rotational speed (max.): 4,500 rpm, overall weight: 7,600 kg, swing diameter over bed slide: 600 mm, bar passage: 75 mm, chuck outer diameter: 250 mm, Equipment: rotational speed infinitely variable, Top-of-the-line new machine, "THE TANK," with Siemens 828 Shopturn, BMT65 (MORI-Seiki NL series), Renishaw measuring arm, and counter-spindle. Available with automation for an additional charge (see images). - Siemens touch display, 15.6 inches - Main spindle, 3,500 rpm - Siemens motor - Flat guides, Turcite coated - 12-position BMT turret for 12 driven tools - 3-jaw chuck, Ø 250 mm, main spindle - 3-jaw chuck, Ø 150 mm, counter-spindle - C-axis - Y-axis - Counter-spindle - Chip conveyor - Coolant system and internal coolant, 20 bar - Work area light - Foot pedal chuck - Machine status light, multi-colored Ksdpfjylnb Sjx Afkena The accessories shown in the images are not included in the offer.

Condition: new, Year of construction: 2023, functionality: fully functional, HYUNDAI-WIA HD3100YA FANUC 0IT PLUS CNC LATHE WITH Y AXIS MACHINE CONSTRUCTION & FEATURES ▪ ONE PIECE HEAVY DUTY CAST IRON BED CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY. ▪ 3,500 RPM MAIN SPINDLE. Knjdox Thu Nspfx Afkea ▪ 5,000 RPM LIVE TOOLING SPEED. ▪ HEAVY DUTY CUTTING WITH EXCELLENT PERFORMANCE. ▪ WEDGE TYPE Y-AXIS. ▪ 12 STATION HIGH SPEED RIGID SERVO TURRET – BMT55P ▪ HARDENED & GROUND BOX GUIDE WAYS MACHINE CAPACITIES Swing Over the Bed Ø 800 MM Swing Over the Carriage Ø 670 MM Maximum Turning Diameter Ø 420 MM Maximum Turning Length 760 MM Bar Capacity – Main Spindle Ø 81 MM MAIN SPINDLE Chuck Size Ø 10” - 254 MM Spindle Bore Ø 91 MM Spindle Speed (Rpm) 3,500 RPM Motor (Max / Cont.) 26.0 / 18.5 KW Torque (Max / Cont.) 734 / 522 NM Spindle Type BELT Spindle NoseA2-8 FEED Travel X265 MM Travel Y120 (± 60) MM Travel Z830 MM Rapid Speed X24 M / MIN Rapid Speed Y10 M / MIN Rapid Speed Z30 M / MIN Slide Type HARDENED & GROUND BOX GUIDEWAYS TURRET Number of Tools12 Tool Size - OD25 MM² Tool Size - IDØ 20 MM Indexing Time0.2 SEC / STEP Y-Axis Type WEDGE TYPE LIVE TOOL Motor (Max / Cont.) 5.5 / 3.7 KW Milling Tool Speed 5,000 RPM Torque (Max / Cont.) 70/0 / 35.4 NM Collet Size Ø 16 – ER25 Type BMT-65P TAIL STOCK Taper MT 5 Quill Diameter Ø 100 MM Quill Travelb120 MM Travel b830 MM Voltage 415 V / 50 HZ / 3PH Floor Space (L x W) 3,630 X 1,910 MM Height 1,960 MM Weight 6,200 KGS INCLUDED FACTORY FITTED MACHINE OPTIONS CONVEYOR & CHIP BOX HELICAL INTERPOLATION FUNCTION HIGH PRESSURE COOLANT SYSTEM 20 BAR IN LIEU OF STD CALL LAMP (3 COLOUR) - IN LIEU OF STD BARFEED INTERFACE - MAIN SPINDLE PARTS CATCHER - MAIN SPINDLE TRANSFORMER - 415V 3PH 50HZ QUICK TOOL SETTER - AUTO MAIN SPINDLE - 3,500 RPM, 26.0 / 18.5 KW, 734 NM BELT DRIVEN PROGRAMMABLE TAILSTOCK IN LIEU OF STD QUILL FORWARD / REVERSE CONFIRMATION DEVICE QUILL TYPE TAILSTOCK - MANUAL TYPE MT#5 100 MM DIA QUILL, 120 MM QUILL TRAV STANDARD FEATURES SPINDLE POSITIONING MAIN - 0.001 DEG INDEX (C1-AXIS) CHUCK CLAMP FOOT SWITCH MAIN SPINDLE 10 INCH 3 JAW HYDRAULIC CHUCK CHUCK OPEN / CLOSE CONFIRMATION DEVICE MAIN SPINDLE HYDRAULIC CHUCK PRESSURE INTERLOCK - MAIN SPINDLE STANDARD HYDRAULIC CHUCKING CYLINDER - HOLLOW 15" MONITOR HW ENERGY SAVING SYSTEM (HW-ESS) MACHINE GUIDANCE (HW-MCG) PART PROGRAM STORAGE - 2MB SMART GUIDE-I (CONVERSATIONAL PROGRAMMING) STANDARD COOLANT SYSTEM 0.5 BAR STANDARD COOLANT TANK 180 LITRES FULL SPLASH GUARDING SYSTEM CALL LIGHT TOOLBOX TOOLING PACKAGE QUILL TYPE TAILSTOCK 12 STATION BMT65P SERVO TURRET, LIVE TOOLS 5,000 RPM, 5.5 KW, 47.0 NM

Condition: excellent (used), Year of construction: 2020, operating hours: 4,000 h, functionality: fully functional, CNC turning center Doosan Puma 700 XLY II Turning length: 5,050 mm Turning diameter: 700 mm with driven tools and Y-axis Basic equipment: - CNC control Fanuc 0i with Manual Guide i - 45" inclined bed in tubular construction - Main spindle with 4 bearings. Spindle bearing accuracy class P 4 - Lifetime lubrication - Internal clamping device hydraulically actuated with internal clamping cylinder complete with safety device, coolant collection tray, stroke control and draw rod - Automatic central lubrication - Tailstock programmable - Flat bed guides hardened and counter surface coated with Rulon 142 - Coolant system with 7 bar delivery pressure - Guide rail cover Z-axis - Full enclosure - Watertight work area lighting - Integrated alignment screws and mounting plates Including Doosan options: - Tailstock programmable (towed by the turret) - Oil skimmer - Coolant system with 14 bar delivery pressure - Electronic tool breakage monitoring - Automatic tool measuring arm - 3-color warning light - Clamping force monitoring - Additional handwheel - NC option Arbitrary Speed Threading - 2x Drilling & Milling head BMT 85 CC PRECI-FLEX; straight ER50 - 2x Drilling & Milling head BMT 85 CC PRECI-FLEX; angled ER50 - Preparation for programmable hydraulic steady rest (includes complete basic body, connected to open/close the steady rest via M-function and the basic body can be automatically positioned in the Z-direction, towed by the cross slide without the steady rest) Schunk ROTA NC 630-180 2520-Sv90" Chuck diameter 630 mm Manufacturer Schunk with involute gearing 90" incl. flange and draw rod adapter Steady rest RX6-ZSW-100520 50-SCUW-95 self-centering, hydraulic steady rest, sealed housing (proofline), measuring system for clamping range monitoring (SCU-V), integrated flushing channels / chip protection, flushing nozzles, extra compact design, integrated cylinder with pressure converter. Clamping range from 100mm to 520mm Brinkmann pressure boosting pump 30 bar incl. 50p Mahle filter approx. 30 bar, can be switched on via M-function incl. cartridge filter Coolant gun with its own pump Coolant gun for cleaning the work area when the door is open In automatic operation without function Hinged belt chip conveyor, discharge on the right, inclination angle 50 degrees, Knsdpfxszlcyuj Afkoa discharge height 1150 mm Chip cart Type SKM750; 0.75m3 volume; 1000kg load capacity; with rollers and forklift pockets