Used Hmc for sale (40)

Year of construction: 1986, condition: good (used), Technical Details : Products - - Flats - 10x3 - 25x3 mm 10x4 - 25x4 mm 12x5 - 20x5 mm - Square - 6x6 - 12x12 mm Bdsdpfxsd H Ur Ae Abbjk - (T) Profile - 20x10x3 mm - ( L) Profile - 15x15x3 - 18x18x3 mm Raw Material wire - 8,9,10,11,12,13,14,16 mm Transformer Power - 20 Kw Speed - 35m/min

Condition: ready for operation (used), Year of construction: 1999, functionality: limited functionality, Equipment Joinery Machine K2 Cross Infeed Conveyor 5-strand 2.2 m Extendable Timber Rack Undertable Swing Cut-off Saw with Open Base Control System for Cut-off Disposal Universal Milling Unit Roller Cutter Finger Cutter Dovetail Cutter Combination Support for Vertically Operating Tools Drilling Device Combination Support for Horizontally Operating Tools Drilling Device 1 Drilling Device 2 Slotting Device Marking Device (Stop Side) Fully Automatic Beam Turning Station Bdodpsxrkkzofx Abbjk Extension Table 7.1 m Transfer Cross Conveyor 6-strand 6-arm Depositing Table Planing Machine HMC Fully Automatic 4-sided Planing and Chamfering Planer Motors 7 kW The machine can be inspected at any time upon request. The buyer is responsible for dismantling and transportation.

Condition: excellent (used), Year of construction: 2004, Used Kia Model Kia Centre H63 Twin Pallet Horizontal Machining Centre with 60 Station ATC and Fanuc 18M Control. Serial Number KH630216. Year of Manufacture 2004. MACHINE CONSTRUCTION & FEATURES • One Piece Heavy Duty Cast Iron Bed Construction for High Accuracy & Rigidity • Heavy Duty Oil Cooled 2 Stepped Geared High Torque Spindle • Shuttle Type Pallet Changer • Pre-Tensioned Double Anchored Ballscrews • Fanuc 18M Control with 15 Inch Colour Screen • 20 Bar ‘Cool-Jet’ Through Spindle Coolant • Set of BT50 Toolholders • Filtermist FX5002 Mist Filtration • Frontal and Side Operators Platforms TABLE Table Size 630 X 630 MM Maximum Load Capacity 1,000 KGS Maximum Working Size Ø 1,120 X H 875 MM 0bwkk Minimum Index Angle 1° FEED X-Axis 950 MM Y-Axis 825 MM Z-Axis 760 MM Distance from Table Surface to Spindle Centre 175 ~ 935 MM Distance from Table Centre to Spindle Nose 0 ~825 MM Guide Type HARDENED & GROUND BOX GUIDEWAYS SPINDLE Spindle Taper NT #50 Spindle rpm 4,500 RPM Spindle Motor Output (Max/Cont.) 26.0 / 22.0 KW Spindle Torque (Max/Cont.) 1,267 / 1,071 NM Type 2 STEPPED GEARED HEADSTOCK Bjdpfxou A Ut Ne Abbodk FEED RATE Cutting Feed Rate X, Y and Z-Axis 5 M / MIN Rapid Feed Rate X, Y and Z-Axis 20 M / MIN ATC Number of Tools 60 Tool Type BT #50 Maximum Tool Diameter Ø 110 MM Max. Tool Diameter without Adjacent Tools Ø 245 MM Maximum Tool Length 600 MM Maximum Tool Weight 20 KGS Tool Selection Method FIXED ADDRESS Tool Change Time – Tool to Tool 6 SEC Tool Change Time – Chip to Chip 11 SEC APC Number of Pallets 2 APC Type SHUTTLE TANK CAPACITY Coolant Tank 400 L POWER SUPPLY Electric Power Supply 36 KVA Voltage 415V / 3PH / 50HZ MACHINE Floor Space (L x W) 3,610 X 5,320 MM Height 3,140 MM Weight 14,000 KGS

Condition: good (used), Year of construction: 2000, MORI SEIKI SH-503/40 TWIN PALLET CNC HORIZONTAL MILLING MACHINE WITH MORI SEIKI MSX-502III CONTROL UKUK Pallet Dimension 500 x 500mm. Maximum Table Load 1,000kg. Axis Travel X'=630mm, 'Y'=600mm, 'Z'=650mm, 'B'=1° Increment. Rapid Traverse 'X,Y,Z'=32m/min. Spindle Taper BT40. Maximum Spindle Speed 12,000rpm (22kW Motor). 120 Position ATC. Maximum Tool Ø150mm (Without Adjacent Tools), Maximum Length 360mm, Maximum Tool Weight 12kg. S/No. 1212 (2000). DESCRIPTION With Renishaw OMP 600 Spindle Probe, Blum Laser Tool Setting/Breakage Unit, Dual Auger To FSE Chip Conveyor, Through Coolant Filtration System, Oil Chiller, Filtermist Mist Extraction Unit, Handwheel & Signal Tower. Overall Dimensions L4,500 x W2,725 x H3,267mm. Weight 14,900kg. Note: Tooling & Tombstones Not Included. Bdedpfx Aboxqt Tiobjk

Condition: good (used), Year of construction: 2012, Ref. -No.: 10558 Manufacturer: YOU JI Type: HMC 1200 BP Year of construction: 2012 Type of control: CNC Control: FANUC Series 18i-MB Storage location: Halberstadt Country of origin: Taiwan Bdodpfexxpbxsx Abbok X-Travel: 1800 mm Y-Travel: 1500 mm Z-Travel: 1360 + 990 mm B-Axis: 360 ° W-Axis: 700 mm Table Dimensions (Lengthxwidth): 1200 x 1400 mm Table Load: 5.000 kg Max. Tool Weight: 25 kg Max. Tool Length: 400 mm Max. Tool Diameter: 125 mm Spindle Speed: 30 - 3.500 RPM Numbers Of Pallets: 2 Further information: 4-axis simultaneous machining IKZ (internal spindle cooling) AKZ (external spindle cooling) Synchronized walking (rigid thread cutting) Renishaw RMP60 workpiece probe (radio) Number of pallet changers for automatic pallet change: 2 Size: 1200 x 1400 mm Tool magazine, number of tools: 60 The machine is currently in production and can be viewed by appointment.

Condition: used, CNC 5-Axis HMC – Horizontal Machining Center, Milling Center, Manufacturing Center Manufacturer: LICON Model: Liflex 1266 PC B1 Year of construction: 2016, Commissioned: 2017 Equipped with SIEMENS 840D SL (Solution Line) CNC path control, with 5 simultaneously controlled axes Travel paths X: 1200 mm, Y: 660 mm, Z: 650 mm A-axis as swivel bridge +/– 135° (270°) B-axis 360° continuous Axis acceleration X + Y-axis 6 m/s² Axis acceleration Z-axis 9 m/s² Feed force X + Y-axis 7500 N Feed force Z-axis 10000 N Positioning tolerance (X/Y/Z) 0.008 mm A-axis swivel speed 180° rotation in 4 sec. Interference diameter on the swivel bridge max. 1400 mm Transport load on the swivel bridge max. 700 kg Tool holder HSK 63 Spindle speed max. 12,000 rpm, stepless Spindle power 37kW at 40% duty cycle Bedpfxjt Ac Efo Abbsdk Spindle torque at 40% duty cycle 85 Nm Maximum spindle torque 100 Nm Tool change time (chip-to-chip) approx. 3.7 sec. Tool diameter with adjacent slots occupied Ø 140 mm Tool diameter with adjacent slots free Ø 250 mm Maximum tool length 400 mm Maximum tool weight 20 kg Power supply 400 Volt, 50 Hz Connected load 80 kVA Compressed air connection 5-8 bar - LIFLEX MSP 80/63/85/12,000 motor spindle (output 37kW/40% duty cycle) with liquid cooling and recooling unit - 2-axis rotary tilting table LICON as B- and C-axis, with hydraulic axis clamping - Zero-point clamping system on the swivel axis turntable - Dual pallet changer, without pallets (these need to be newly sourced) - Media transfer of 5 single-action pressure lines for oil or air, for workpiece clamping on the pallets Hydraulic functions from 30-150 bar, with pressure monitoring (controllable via M-functions) - Tool changer with 30 tool positions, disc turret type - Machine designed for dry machining with minimal quantity lubrication (MQL) system - MQL-TSC, internal MQL lubrication supply through the spindle - Scraper belt chip conveyor, discharge height 1150 mm - Licon ECO-Mode (energy-efficient aggregate operation) - Direct linear measurement system on all axes - Operating hours (control voltage on) ≈ 7,500 h Space required for operation L x W x H 9,000 x 5,000 x 3,800 mm Space required for transport L x W x H 6,100 x 4,400 x 3,600 mm Base machine weight approx. 21 tons Total weight: approx. 24 tons Very good condition

Condition: ready for operation (used), Year of construction: 2019, operating hours: 10,458 h, Control Unit Brand FANUC Bdedpjxx Dvwjfx Abbsk Model oi-F This 4-axis KAFO HMC-500 was manufactured in 2019 and features a robust FANUC 0i-F control unit. With a spindle speed of up to 10,000 rpm and a tool magazine capacity of 40 tools, it ensures efficient machining. The machine has a pallet size of 500x500 mm and a maximum workpiece size of Ø700 mm by 800 mm. Consider the opportunity to buy this KAFO HMC-500 horizontal machining centre. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 2016, Doosan HM1250 Twin Pallet Horizontal Machining Centre with Fanuc Series 31i - Model B CNC Control, Travels X Axis 2100mm, Y Axis 1500mm, Z Axis 1500mm, Pallet Size 1250mm x 1250mm, CAT50 Spindle Taper, 60 Tool ATC, Renishaw Probe, Hydtec Hipreco KHS-375 High Pressure Coolant Filter Unit, Spindle Chiller, Machine Weight 31,000kg. S/No. MH0014 - 000201 (2016) - CE Mark Bsdpfx Asxzga Djbbedk Please Note: These lots are located in Ferrara, Italy. All/Any tooling is being offered as specifically described.

Condition: ready for operation (used), Year of construction: 2003, operating hours: 5,117 h, functionality: fully functional, machine/vehicle number: 723503, travel distance X-axis: 710 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, table width: 500 mm, table length: 500 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 60, TECHNICAL DETAILS Control: Fanuc 18i-MB Pallet size: 500 x 500 mm X-travel: 710 mm Y-travel: 610 mm Z-travel: 610 mm B-axis: 360° (steps of 0.001°) Max. pallet load: 500 kg Spindle Spindle mount: ISO 40 (large-area spindle) Spindle speed: max. 10,000 rpm Number of tool positions: 60 pieces MACHINE DETAILS Dimensions: 3,675 x 4,510 x 3,100 mm Bedpfxjvn Rf Ie Abbjdk Weight: 13,000 kg Operating hours: 730 h Cutting time: 5117 h Part counter: 55,588 pieces

Year of construction: 2009, condition: good (used), Horizontal machining center (HMC) DECKEL MAHO - DMC65 H duoBLOCK MACH-ID 7722 Make: DECKEL MAHO Type: DMC65 H duoBLOCK Control: HeidenHain iTNC530 Year: 2009 4 Axis Controlled simultenious Bsdpfx Ajphlviebbodk New WEISS spindle in 2022 New Window SG Glass BLUM laser measuring Renishaw 3D Measuring taster Filtration and coolant system 600 Liter and 40 bar Specifications Metric US Standard X - Travel 650 mm Y - Travel 700 mm Z - Travel 700 mm B-Axis indexing 360 ° Table Length 450 mm Table Width 500 mm Table load 600 Number of pallets 2 Feed rate X-Axis 60000 mm/min. Feed rate Y-Axis 60000 mm/min. Feed rate Z-Axis 60000 mm/min. Spindle Taper 40 ISO/Bt/Mk Power on spindle 13 kW Speeds / ranges 12000 Rpm ATC / revolver 120 Coolant true spindle / Bar 40 Number of controlled axis 4 Chip conveyor Yes Coolantsystem Yes Dimensions (Estimate) Length 5900 mm Width 3586 mm Height 2524 mm Weight 11000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Plates Size: 520x520x40mm We have 16 plates in the stock Price for one plate 450 eur Bodpfx Asl D Nxkobbodk

Condition: excellent (used), Year of construction: 2015, operating hours: 40,000 h, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 800 mm, workpiece length (max.): 500 mm, workpiece width (max.): 500 mm, workpiece height (max.): 700 mm, workpiece weight (max.): 700 kg, table width: 500 mm, table height: 700 mm, table length: 500 mm, overall weight: 13,000 kg, spindle speed (min.): 15,000 rpm, number of slots in tool magazine: 180, mount diameter: 500 mm, tool length: 500 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We have two machines of this type (HMC 500) available for sale and one HM400. The machines are still in use and are in perfect condition. Inspection and testing on site are possible at any time. Bdjdpfx Aswx H Dtjbbjk

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, CNC MULTI-OPERATION MACHINE Make: SAJO HMC 800 P Year of manufacture: 1997 Machine data Control system Siemens 840 D Longitudinal movement ( X ) 1350 mm Vertical movement ( Y ) 900 mm Transverse movement ( Z ) 800 mm Spindle motor 37 / 26 kW DC Spindle speed 30 - 3600 rpm Tool magazine, number of tools 123 pcs Feed rate X, Z and Y 15 000 mm/min Pallet changer for automatic change of pallets Pallets Number of 6 pcs Size 800 * 800 mm Tool magazine Bdodpsvdbmhsfx Abbok Location T1-T45 L=525, D1=250, D2=370 Location T46-T67 L=525, D1=80 Location T68-T104 L=300, D1=250, D2=370 Seat T105-T123 L=250, D1=80 Max weight Low 10 kg, High 30 kg

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 710 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, workpiece weight (max.): 500 kg, spindle speed (max.): 12,000 rpm, A set of 3 Bridgeport XR 700 HMCHP machines is up for auction: 1. Machine Serial number: 460P367 Year of manufacture: 2007 2. Machine Serial number: 460P389 Year of manufacture: 2007 3. Machine Serial number: 460P394 Year of manufacture: 2007 TECHNICAL DETAILS Travels X-axis: 710 mm Y-axis: 610 mm Z-axis: 610 mm Pallet size: 500 mm x 500 mm Maximum workpiece weight: 500 kg Number of pallets: 2 Spindle taper: BT-40 Spindle speed: 12,000 rpm Spindle motor power: 30 kW MACHINE DETAILS Control system: Fanuc Series 18iMB Dimensions & Weight Dimensions: 4,650 x 3,675 x 2,400 mm Weight: 13,000 kg Bjdpfx Abexgn T Nobsdk Note: The machine requires transportation with oversize width.

Condition: used, Horizontal machining center with pallet changer STEINEL type BZ 24 FFZ with CNC control SIEMENS Sinumerik 850 M serial no. 77 year of construction 1990 Travel X: 630 mm, Y: 500 mm, Z: 500 mm Table size per pallet 400 x 400 mm Pallet rotation B-axis Spindle speed max. 7100 rpm infinitely variable Tool holder ISO 40 Mains connection 380 Volt, 50 Hz, 80 Amp. - Tool changer with 60 tool positions and double arm gripper - Pallet changer with 4 pallets Bdjdsdzqmrspfx Abbek - Horizontal pallet position for machining, axis movement = X-axis - Pallet rotation = B-axis - Spindle ram as Z-axis - Spindle ram with transverse movement as Y-axis - KSS spray nozzles on the spindle ram and in the work area - Coolant device with chip conveyor under the work area - CNC control SIEMENS Sinumerik 850 M - Interface for data transfer Space requirement L x W x H 9000 x 3100 x 3200 mm Weight 13.5 tons Transport dimensions on truck: Machine with tool magazine L x W x H 9000 x 3000 x 3000 mm Chip conveyor L x W x H 4700 x 1000 x 1450 mm Container loading into a 40" OT HC is possible. good condition

Condition: used, Power supply, control card, input card, control, edge banding machine, edge banding machine -Manufacturer: ELCO -Type: HMC-1B 5V10A -Number: 1x control cards available -Price: per piece -Dimensions: 250/135/H60 mm -Weight: 1.3 kg Bsdscpnl Njpfx Abbsdk

Year of construction: 2001, condition: ready for operation (used), Horizontal Machining Centre with boring spindle Giddings & Lewis type HMC 410 Pallet size: 1.250 x 1.600 mm Bdsdpeguk Icofx Abbsk Pallet load: 7.000 kg max. Pallet change time: 55 sec. Number of pallets 2 pcs Table indexing: B-Axis 0.001° Table cross travel (X) 3.000 mm Spindle vertical travel (Y) 2.100 mm Column longitudinal travel: Z 1.800 mm Feed: X/Y/Z 1 – 40.000 mm/min. Rapid: X/Y/Z 40 m/min Rotary table 6 rpm Max rotary diameter: Ø2.500 mm Spindle taper: ISO 50 Spindle drive motor: 30 KW Spindle speed: 20 – 5.000 rpm ATC 120 pots CNC controller: Siemens Sinumerik 840D Max workpiece height: 2.000 mm Accessories Hexagon radio measuring probe Loading stations 2 PCS Build year 2001 (Siehe auch weitere Angebote des Inserenten.)

Condition: good (used), Year of construction: 2020, functionality: fully functional, travel distance X-axis: 640 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 680 mm, controller manufacturer: Fanuc, controller model: OiMF, total width: 500 mm, table length: 500 mm, spindle speed (min.): 40 rpm, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, Horizontal machining center Pallet changer. TABLE Pallet dimensions: 500x500 mm Bdsdpfx Abowh Rfgsbek No. pallets: 2 nr. Table rotation: 0,001 gradi TURNING CAPACITY Longitudinal X-travel: 640 mm Vertical y-travel: 610 mm Cross z-travel: 680 mm Rapid feedrates: 20/60 mt./min. SPINDLE Spindle nose: BBT40 ISO Spindle speed: 40-15.000 giri/min. Motor power: 18.5/22 Kw TOOL MAGAZINE Tools holder: 60 nr. ACESSORIES: BLUM laser tool presetting system for tool length, radius, presence, and wear detection. The transmitter and receiver are separate units mounted on dedicated supports. Fagor optical scales.

Condition: good (used), Year of construction: 2014, CNC MULTI-OPERATION MACHINE Make: You Ji HMC 1200-BP Year of manufacture: 2014 Bdedpfx Asvdbm Usbbek Machine data Control system Fanuc Series 18i-MB ( Heidenhain X, Y and Z linear scales ) Longitudinal movement ( X 7kW ) 1800 mm Vertical movement ( Y 6kW ) 1500 mm Transverse movement ( Z 7kW ) 1500 mm Transverse movement ( W 7kW ) 700 mm B-axis ( W 4kW ) 360.000 divisions ( positioning accuracy +- 7.5 ) ( simultaneous 4-axis machining ) Spindle motor 22 / 26 kW DC ( Z-axis servo motor 7kW ) Spindle speed 30 - 3500 rpm ( Spooling through spindle 17 bar ) Air blowing through the spindle Synchronized walking (Rigid tapping) Station for automatic waxing of 90 degree angle head Workpiece probe Renishaw RMP60 (radio) Pallets Number 2 pcs Pallet changer for automatic changing of pallets Size 1200 * 1400 mm ( T-spar size 22x9 ) Max weight on table 5000kg B axis design with positioning accuracy +- 7.5 sec and positioning accuracy +- 5 sec together with efficient servo motors allows machining of complicated workpieces workpieces and simultaneous 4-axis machining Tool magazine Tool magazine, number of tools 40 pcs Maximum weight of tools 25 kg, Max diameter of tool 125mm Max tool length 400mm

Condition: used, Machine not operational, control system does not start Horizontal Machining Center with Pallet Changer STEINEL Type BZ 24 FFZ with CNC Control SIEMENS Sinumerik 850 M Serial No. 58 Year of manufacture 1990 Travels X: 630 mm, Y: 500 mm, Z: 500 mm Table size per pallet 400 x 400 mm Pallet rotation B-axis Spindle speed max. 7100 rpm, infinitely variable Tool holder ISO 40 Power supply 380 Volt, 50 Hz, 80 Amp. Bsdpfsdzqmfjx Abbjdk - Tool changer with 60 tool positions and double-arm gripper - Pallet changer with 4 pallets - Horizontally positioned pallet station for machining, axis movement = X-axis - Pallet rotation = B-axis - Ram spindle as Z-axis - Ram spindle with cross movement as Y-axis - Coolant spray nozzles on the ram spindle and in the work area - Coolant system with chip conveyor beneath the work area - CNC Control SIEMENS Sinumerik 850 M with TFT monitor - Interface for data transfer Space requirement (L x W x H) 9000 x 3100 x 3200 mm Weight 13.5 tons Machine not operational, control system does not start – otherwise in good condition Transport dimensions: Machine with tool magazine L x W x H 9000 x 3000 x 3000 mm Chip conveyor L x W x H 4700 x 1000 x 1450 mm

Condition: used, Horizontal machining center with 2-fold shuttle table STEINEL type BFZ 5 with CNC control SIEMENS Sinumerik 810 M serial no. 34 year of construction 1988 Travel X: 500 mm, Y: 400 mm, Z: 320 mm Bdodpfoutuyijx Abbok Clamping surface, table surface 500 x 400 mm Tool holder ISO 40 Spindle speed max. 6300 rpm infinitely variable Main spindle drive 12 kW Mains connection 380 Volt, 50 Hz, 30 kVA - Tool changer with 24 tool positions - Changing table with 2 stations - Interface for data transfer - Coolant unit with chip conveyor Space requirement L x W x H 4100 x 2500 x 2650 mm Weight approx. 8 tons good condition Transport dimensions: Machine L x W x H 3200 x 2500 x 2650 mm, approx. 7.5 tons. Chip conveyor L x W x H 3500 x 1100 x 2100 mm, approx. 600 kg

Condition: excellent (used), Year of construction: 2022, operating hours: 8,500 h, functionality: fully functional, travel distance X-axis: 640 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 680 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed rate Y-axis: 6 m/min, nominal power (apparent): 40 kVA, controller manufacturer: Fanuc, controller model: OiMF, table load: 500 kg, rotational speed (min.): 40 rpm, rotational speed (max.): 15,000 rpm, overall weight: 11,000 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 22,000 W, number of spindles: 1, number of slots in tool magazine: 60, tool length: 400 mm, input voltage: 220 V, pallet changer: automatic, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Very well-maintained Wele HMC500 for sale. The machine was professionally inspected and dismantled by JKET/Wele factory service in week 48. The machine is securely packaged and ready for collection; commissioning by JKET/Wele can be arranged at extra cost. Control powered on: approx. 25,000 hours Machine powered on: approx. 25,000 hours Program run: approx. 8,500 hours Spindle powered on: approx. 8,500 hours Drive powered on: approx. 8,500 hours Axes in motion: approx. 8,500 hours Including: - Touch probe - 4x SK40 tool holders (1x touch probe, 3x tool holders) The machine was used exclusively for machining aluminium. Scope of delivery includes: - 2 pallets with pallet changer (500 x 500 mm) - Table rotation: 0.001 degrees - 2 pallet towers, each with 4 sides and 3 Lang Quick-Point longitudinal clamps per side - Chip conveyor and chip bin included - Coolant tank (500 liters) and oil skimmer included Feeds: 20/60 m/min Spindle speed: 40–15,000 rpm Motor power: 18.5/22 kW Frequency converter included 500 l coolant tank Bdedpfxjxyuvqe Abbek Oil cooler Only aluminium machining performed on this machine All manuals available

Condition: ready for operation (used), Year of construction: 2016, A Hoyer three-phase asynchronous motor is available. Protection class: IP55, insulation class: F/B, design: IM B3L, efficiency class: IE3, power: 30kW/36kW, power factor: 0.90, operating mode: S1, weight: approx. 250kg. Including Lenze i550 frequency converter. On-site viewing is possible. Bedpjxmkc Hefx Abbsdk

Condition: used, Year of construction: 2020, functionality: unexamined, cooling capacity: 128.3 kW (174.44 HP), type of input current: three-phase, type of cooling: water, overall weight: 2,350 kg, input voltage: 400 V, total width: 2,350 mm, total length: 4,400 mm, total height: 2,500 mm, power: 2 kW (2.72 HP), input current: 137 A, heating capacity: 147.7 kW (200.82 HP), input frequency: 50 Hz, Equipment: type plate available, Techno Freddo Reverse Heath pump units Type PHMCD 320 MAD These units can be used for as well heating- as cooling applications Capacity for heating application 147,7 KW with a water temperature of 40˚C/45˚C Capacity for cooling application 128,3 KW with a water temperature of 7˚C/12˚C Refrigerant R290 (propane) These heath pumps are built as container units with 2 compressors driven by variable frequency drives. We have a total of four of these units on stock. Two of these units are complete Bjdpfx Aow U Dx Sobbsdk and of two units the water pumps are missing. Dimensions of the units are lxwxh 4400x2350x2500 mm. Weight 2350 Kg. Year of built 2020 Price per unit € 10500,00 This is the price fort he complete units including the water pumps. Price per unit € 9500,00 This is the price fort he units where the water pumps are missing.

Condition: new, functionality: fully functional, overall weight: 25 kg, operating pressure: 500 bar, protection type (IP code): IP55, rotational speed (max.): 4,300 rpm, Hydraulic motor PMH MCF55 Bdodpfx Ajv D Hwrjbbjk Displacement cc/rev 55 Max output speed rpm 4,300 Max pressure bar: 500 The max output torque: Nm 350 Weight: 25 kg Manufacturer: PMP Industries Part Number: MCL.5502.1 Serial Number: PP0377490 Customer Code / Model: PMH MCF55 Country of Manufacture: Italy 1 piece in stock