Used Blacksmith Forge for sale (187)

Condition: used, This listing is for a Fristam FPE742/185A Centrifugal Pump. Hjdpfx Acsxxy D Rjvok The unit is in full working condition and is ready for immediate release. This Unit was installed new in 2015 by Freestead Process Technology. Product Overview: The Fristam FPE742 5.5KW Centrifugal Pump is a robust and versatile sanitary pump engineered for hygienic applications in industries such as food and beverage, pharmaceuticals, and biotechnology. With advanced design features and high-quality materials, this pump provides efficient, reliable, and gentle product handling, even at high volumetric flows. Its superior construction and innovative engineering make it a durable and reliable choice for critical processes. Key Features Hygienic Design: Close internal clearances as tight as 0.5 mm enhance efficiency while ensuring sanitary operation. Designed for gentle handling of sensitive products, preserving their quality and integrity. Advanced Engineering: Optimized Impeller Design: Maximizes efficiency while ensuring low NPSH requirements, reducing cavitation risks for smooth and quiet operation. Handles high volumetric flows while maintaining gentle product handling. Robust Construction: Made from 316L stainless steel castings and forgings, providing exceptional mass, strength, and durability. Resistant to hydraulic shock and cavitation, which can damage other pumps in demanding applications. Ease of Maintenance and Installation: Features a self-aligning shaft for quick and easy installation and gapping. A concentric collar on the shaft prevents run-out, protecting the seal from wear and damage, extending the pump’s lifespan. Applications: Food & Beverage: Dairy, juices, and hygienic liquid handling processes. Pharmaceuticals: Transferring high-purity and sensitive products. Biotechnology: Supporting shear-sensitive biological processes.

Condition: new, For inquiries regarding this attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. BMS-F 125 Forestry Mulcher / Mulcher / NEW / In Stock & Immediately Available Price: €22,990.00 net / €27,358.10 gross Working width: 1.25 m Overall width: 1.53 m Depth: 1.05 m Height: 0.72 m Weight: 667 kg - Mulching attachment for excavators, suitable for mulching alongside riverbanks, in forests, along railway tracks, and in other hard-to-reach locations - Mulches brush and wood up to 20 cm diameter - For excavators from 10 to 20 tons - Suitable for mounting to various mounting plates - Drive designed for hydraulic motor depending on the carrier's oil flow - Indirect belt drive with 5 V-belts - Reinforced housing made from wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge over the full hood length - Front and rear chain protection - Height-adjustable skid plates reinforced with carbide plates - Color: red RAL3020 · anthracite RAL7021 OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 228 Rotor with fixed MINI DUO tools (2 carbide tips) - 27 pieces, part number 176.02.005 OPT 465 M-BOOST angled-axis piston motor - With automatic displacement control 60-80 cm³ and overpressure valve - Displacement in cm³ (min-max): 60 - 80 - Required pressure in bar (min-max): 200 - 350 - Required hydraulic flow rate: 100 - 150 l/min Intermediary adapter for BE314 Z1 - Approx. 200 mm high An independent hydraulic system is recommended for operation. 3 hydraulic lines are required: pressure, return, and drain. For the hydraulic hood, an additional double-acting hydraulic connection is necessary. The unit is supplied without hoses, fittings, and mounting plate. We have a very large range of different Seppi M. products in stock and immediately available! Mr. Herden (phone) will be happy to support you. Financing offers available on request. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. With 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We supply the full Seppi M. product range! Errors and prior sale excepted! Hsdpfxjyltwfo Acvjk = Further information = Please contact Marius Herden for further details.

Condition: used, Year of construction: 2023, For inquiries regarding the attachment, Mr. Herden will be your contact (by phone). Seppi M. MINI-BMS 105 / 5-10 t / Forestry Mulcher / CUT CONTROL / DEMO – Unit / Year: 2023 / In stock & immediately available Price: €14,090.00 net / €16,767.10 gross - Working width: 1.05 m - Overall width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulcher for excavator attachment - Suitable for mulching along riverbanks, in forests, and other hard-to-access areas - Mulches brushwood and shrubs up to 10 cm Ø - For excavators from 5-10 tonnes - For mounting on various adapter plates - Drive designed for hydraulic motor, depending on the carrier vehicle’s oil flow rate - Indirect V-belt drive with 5 V-belts - Reinforced housing made from wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge along the entire hood length - Front guard with chains - Rear guard with chains - Skids, height-adjustable, reinforced with tungsten carbide plate - Colour: red RAL3020 · anthracite RAL7021 OPT 228 Forestry rotor with fixed MINI DUO tools (2 carbide tips) 21 pcs, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 291 VARIO FLOW Axial piston hydraulic motor with variable displacement 29-58 cm³ and overpressure valve - Displacement in cm³ (min-max): 29 - 58 - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic oil flow in l/min (min-max): 60 - 130 Spacer adapter for BE314 Z1 - Approx. 200 mm high Optional: MS08 adapter plate incl. bolts and installation = €1,410.00 net We also have many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and available for immediate delivery. An independent hydraulic power unit is recommended for the drive. 3 hydraulic lines are required: supply, return, and drain. An additional double-acting hydraulic connection is needed for the hydraulic hood. The unit is supplied without hoses, connectors, and adapter plate. Financing offers available upon request. We are an official distribution and service partner for: - Westtech - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - Magni Telehandlers Hedjyltv Uopfx Acvok - JCB Construction Equipment - Mercedes-Benz - Iveco Additionally, with 800 used vehicles in stock, we are among the largest commercial vehicle dealers in Germany. We offer the full Seppi M. product range! Subject to errors and prior sale! Internal no.: 170048 Contact Marius Herden for further information.

Condition: new, For inquiries regarding the attachment, please contact Mr. Herden (by phone). Seppi M. BMS 125 Forestry Mulcher / incl. Rotary Motor / NEW / In Stock & Immediately Available Price: €35,190.00 net / €41,876.10 gross Working width: 125 cm Overall width: 156 cm Depth: 111 cm Height: 85 cm Weight: 1,285 kg - Ideal machine for mulching in hard-to-reach locations such as roadside verges, riverbanks, steep slopes, or for clearing around gas and electricity lines - Mulches brush and wood up to 30 cm diameter - For excavators from 13 to 30 t - Suitable for mounting on various attachment plates - Drive designed for hydraulic motor, depending on the carrier’s oil flow - Indirect V-belt drive with 5 belts - Reinforced double-walled housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable rear hood - Continuous hinge along the entire length of the hood - Front protection with chains - Rear protection with chains - Height-adjustable skid runners in sandwich construction, reinforced with a hard metal plate - Color: red RAL3020 · anthracite RAL7021 OPT 468 Rotor with fixed tools with tungsten carbide inserts - 1 x MONO EXTREME V-LOCK L, part no. 19702266 - 33 x MONO TIP V-LOCK, part no. 19702259 - 1 x MONO EXTREME V-LOCK R, part no. 19702267 Hedpfxjyltv Io Acvsk OPT 465 M-BOOST Axial Piston Motor - With automatic displacement adjustment 60-80 cm³ and pressure relief valve - Displacement in cm³ (min-max): 60 - 80 - Required pressure in bar (min-max): 200 - 350 - Required hydraulic flow: 80 - 170 l/min OPT 372 hydraulic 190° rotary device OPT 158 hydraulically adjustable hood - 24V solenoid valve for opening the rear hood The rotor requires 3 hydraulic lines: pressure, return, and leakage oil. An additional hydraulic circuit is needed for the hood. The machine is supplied without hoses or fittings. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) are in stock and immediately available. We have a very large selection of various Seppi M. products in our warehouse, all available for immediate delivery! Please contact us for more information. We are happy to provide you with a financing offer upon request. We are the official sales and service partner for Seppi M. We are the official sales and service partner for Magni telehandlers. We are the official sales and service partner for DMS. We are the official sales and service partner for Westtech. We are the official sales and service partner for JCB construction machinery. We are the official sales and service partner for Mercedes-Benz. We are the official sales and service partner for Iveco. We are the official sales and service partner for Holp. We are the official sales and service partner for OilQuick. Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the full Seppi M. product range for you! Errors and prior sale reserved! = Further Information = Please contact Marius Herden for more details.

Condition: new, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). Seppi M. MINI-BMS 105 / Forestry Mulcher / incl. Rotary Actuator / MS08 / 5-10t / CUT CONTROL / NEW / In Stock & Immediately Available Price: €21,390.00 net / €25,454.10 gross - Working width: 1.05 m - Overall width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulching attachment for excavator mounting - Designed for mulching along riverbanks, in forests, and other hard-to-reach areas - Mulches brush and wood up to 10 cm diameter - Suitable for excavators from 5-10 tonnes - Can be mounted to various adapter plates - Drive designed for hydraulic motor, dependent on the carrier’s hydraulic flow - Indirect belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge along the full hood length - Front protection with chain guard - Rear protection with chain guard - Adjustable skid runners, reinforced with carbide plate - Colour: Red RAL3020 · Anthracite RAL7021 OPT 228 Forestry rotor with fixed MINI DUO tools (2 carbide tips) 21 units, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools Hedpfx Acoyltvuevek OPT 106 VARIO FLOW Axial piston hydraulic motor with variable displacement 22 - 45 cm³ and overpressure valve - Displacement in cm³ (min-max): 22 - 45 - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow in l/min (min-max): 40 - 100 OPT372 hydraulic 190° rotation device OPT158 electric valve for opening the rear hood Optional: MS08 adapter plate incl. bolts and installation = €880.00 net An independent hydraulic system is recommended for operation. 3 hydraulic lines are required: supply, return, and drain. A double-acting hydraulic connection is also required for the hydraulic hood. The device is supplied without hoses, fittings or mounting plate. Mr. Herden (phone ...) will be happy to assist you. Upon request, we are pleased to provide you with a financing offer. We are an authorised distribution and service partner for Seppi M. We are an authorised distribution and service partner for Westtech. We are an authorised distribution and service partner for Gierking GMT. We are an authorised distribution and service partner for OilQuick. We are an authorised distribution and service partner for Weber MT. We are an authorised distribution and service partner for Holp. We are an authorised distribution and service partner for DMS. We are an authorised distribution and service partner for Magni Telescopic Handlers. We are an authorised distribution and service partner for JCB Construction Machinery. We are an authorised distribution and service partner for Mercedes-Benz. We are an authorised distribution and service partner for Iveco. Additionally, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range! Errors and prior sale excepted. = Further Information = Please contact Marius Herden for further information.

Condition: new, For enquiries about the attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. MINI-BMS 105 / Forestry Mulcher / MS08 / 5-10 t / CUT CONTROL / NEW / in stock & immediately available Price: €15,890.00 net / €18,909.10 gross - Working width: 1.05 m - Overall width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulching attachment for excavator mounting - Suitable for mulching along riverbanks, in forests, and other hard-to-reach areas - Mulches brush and wood up to 10 cm diameter - For excavators from 5-10 tonnes - Compatible with various mounting plates - Drive via hydraulic motor, depending on the carrier’s oil flow - Indirect belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge along full hood length - Front protection with chains - Rear protection with chains - Height-adjustable skid plates, reinforced with tungsten carbide plate - Colour: red RAL3020 · anthracite RAL7021 OPT 228 Forestry Rotor with fixed MINI DUO tools (2 carbide inserts) 21 pcs, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL: - Depth limiter for rotor with fixed tools OPT 106 VARIO FLOW: Axial piston hydraulic motor with variable displacement 22 - 45 cm³ and pressure relief valve - Displacement in cm³ (min-max): 22 - 45 - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow in l/min (min-max): 40 - 100 Intermediary adapter for BE314 Z1 - approx. 200 mm high - Not required when using OPT 372 hydraulic 190° rotation device Optional: MS08 adapter plate incl. bolts and installation = €1,410.00 net For operation, an autonomous hydraulic system is recommended. 3 hydraulic lines are required: supply, return, and drainage. A double-acting hydraulic connection is additionally needed for the hydraulic hood. The machine is delivered without hoses, fittings, and mounting plate. Mr. Herden (phone) will be happy to assist you. We are also happy to provide a financing offer upon request. Hsdpfx Acsyltvnovjk We are an authorised distribution and service partner for Seppi M. We are an authorised distribution and service partner for Westtech. We are an authorised distribution and service partner for Gierking GMT. We are an authorised distribution and service partner for OilQuick. We are an authorised distribution and service partner for Weber MT. We are an authorised distribution and service partner for Holp. We are an authorised distribution and service partner for DMS. We are an authorised distribution and service partner for Magni telehandlers. We are an authorised distribution and service partner for JCB construction machinery. We are an authorised distribution and service partner for Mercedes-Benz. We are an authorised distribution and service partner for Iveco. With a stock of 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range! Errors and prior sale excepted! = More information = Contact Marius Herden for further information.

Condition: used, Year of construction: 2024, For inquiries regarding the attachment, Mr. Herden is available to assist you (by phone). Seppi M. BMS 125 Forestry Mulcher / incl. rotary actuator / Year of manufacture: 2024 / DEMO machine / in stock & immediately available / very good condition Price: €33,490.00 net / €39,853.10 gross Working width: 125 cm Total width: 156 cm Depth: 111 cm Height: 85 cm Weight: 1,285 kg - Ideal machine for mulching in hard-to-reach locations such as along roadsides, riverbanks, steep slopes, or for clearing gas and power lines - Mulches shrubs and wood up to 30 cm Ø - Suitable for excavators from 13 to 30 tonnes - For mounting to various adapter plates - Drive designed for hydraulic motor depending on the carrier machine’s flow rate - Indirect V-belt drive with 5 V-belts - Reinforced double-walled housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable rear hood - Continuous hinge along the entire length of the hood - Front chain guard - Rear chain guard - Height-adjustable skid shoes in sandwich design, reinforced with a carbide plate - Colour: red RAL3020 · anthracite RAL7021 OPT 468 Rotor with fixed tools and tungsten carbide inserts - 1 x MONO EXTREME V-LOCK L, part no. 19702266 - 33 x MONO TIP V-LOCK, part no. 19702259 - 1 x MONO EXTREME V-LOCK R, part no. 19702267 OPT 465 M-BOOST angle-axis piston motor - With automatic displacement regulation 60–80 cm³ and pressure relief valve - Displacement in cm³ (min-max): 60–80 - Required pressure in bar (min-max): 200–350 - Required hydraulic flow rate: 80–170 l/min OPT 372 hydraulic 190° rotation device OPT 158 hydraulically adjustable hood - 24V solenoid valve for opening the rear hood Optional: Verachtert CW20/30/40 adapter plate incl. bolts and installation = €2,510.00 net The rotor requires 3 hydraulic lines: supply, return, and leakage oil. An additional hydraulic circuit is required for the hood. The unit is supplied without hoses or connectors. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. Our warehouse has a very large selection of various Seppi M. products that are ready for immediate delivery! Mr. Herden is happy to assist you by phone. Upon request, we can also provide you with a financing offer. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. Hsdpfoyltvbox Acvok We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Additionally, with a stock of 800 used vehicles, we are one of the largest commercial vehicle dealers in...

Condition: excellent (used), Year of construction: 2001, sheet width 3100 mm plate thickness 6.0 mm ST pre-bending 4.0 mm ST diameter of upper rolls 200 mm side roll diameter 165 mm diameter of lower rolls 190 mm bending speed ca. 5.0 m/min Control DIGI oil volume 80.0 Liter voltage 380 V total power requirement 6.0 kW weight 6000 kg range L-W-H 5250 x 1500 x 1400 mm Hsdpfsx Sr Dfex Acvek very good condition (!!) Current new price approx. 80,000 euros Special price on request Features: - Robust electro-hydraulic 4-roll bending machine * 4-roll concept offers a wide range of bending and rounding options - MG swivel control panel * Operation - control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Two central rolls are driven directly by hydraulic motors - Conical rolling possible via inclined position of the rolls - Parallelism of the side rollers via torsion shafts - Bending on both sides - Diameters of up to 1.1 times the upper roller diameter are possible - Forged and hardened rollers with a strength of 53-55 HRC - Low-maintenance, stable machine concept - Permanent lubrication of all bearings - Stable steel welded construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge/pressure display for the rollers - Safety device (safety line with switch unit) - Operating instructions (PDF)

Condition: used, Year of construction: 1992, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 205 mm side roll diameter ~ 195 mm Control konv. oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 3200 kg range L-W-H 4500 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll bending machine - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front * Operation - Control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Sturdy welded steel construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure indicator for the rolls Hjdpfx Aoxacdvjcvok - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)

Condition: new, functionality: fully functional, Year of construction: 2026, Mechanical asymmetrical three-roller bending machine with pre-bending Make FACCIN, model ASI 2015 Hjdpfxecuxpqs Acvek Guaranteed services: Sheet thickness rolls at 750 mm diameter 5 mm Sheet thickness bending at 750 mm diameter 4 mm Sheet thickness rollers with 195 mm diameter 4 mm Sheet thickness bending at 195 mm diameter 3 mm Performance data refer to steel with a yield point of 240 N/mm² and a strength of 370 N/mm² Technical specifications: Working length 2,000 mm Top roller diameter 150 mm Bottom roller diameter 150 mm Side roller diameter 150 mm Installed power 4.3 kW rolling speed 4 m/min Length 3,300 mm Width 750mm Height 1,200 mm Weight 2,136 kg Standard equipment: All rolls forged and inductively hardened Both central rollers driven Safety control with immediate stop of all machine movements Machine stand stands on frame carrier made of welded construction. This ensures optimum stability and reliability of the machine. Optimum power transmission in the machine stand through long guides with straight-line positioning movement of the bending rollers. (No curved adjustment movement and therefore no torsional forces in the machine stand) Digital display for the position display of the side roll motorized adjustment of the side roll brake motor for rotation and side roll movement Cone bending device with hardened stop block Emergency stop trip wire around the machine Machine with CE certification and documentation

Condition: good (used), Turning device, forging device, welding turning device, welding device -for: production of spirals, springs ... -Holder: Ø 88 x 300 mm -Speed: 31 rpm -Drive: 1.5 kW Hjdpfjcvpuaex Acvek -Voltage: 400 V -Dimensions: 1000/550/H1200 mm -Weight: 120 kg

Condition: new, For enquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). Kinshofer Clamshell Bucket / Two-shell Grab / Grab / KM 604 - 350 / NEW Price: €5,150.00 net / €6,128.50 gross Capacity (litres): 350 Hodpfjyi Rz Nsx Acvjk Overall width E (mm): 650 Max. opening (mm): 1,390 Number of teeth: 5 Weight (kg): 240 Closing force (kN): 20 Lifting capacity (kg): 3,000 - Incl. bolt-on excavator teeth - Incl. rotary actuator KM 04 F Operating pressure at flow rate: 26 – 32 MPa (260 – 320 bar) at 40 - max. 75 l/min The KM 604 is a versatile two-shell grab designed for everyday applications – robust, functional and cost-effective. - Maximum loading height due to compact design with horizontally mounted cylinder. - Long service life thanks to the use of cutting edge material with Brinell hardness 500 HB and generously dimensioned bearings. - Synchronous operation of grab shells via rugged, forged equaliser link. - Bolt-on excavator teeth included in delivery. - Excellent digging properties due to high closing force (20 kN at 26 MPa operating pressure). We maintain a large inventory of various attachments in stock for immediate delivery! Mr. Herden (Tel. ...) is happy to assist you. On request, we are also happy to provide you with a financing offer. We are an official Magni telehandler dealer and service partner. We are an official Westtech dealer and service partner. We are an official Gierking GMT dealer and service partner. We are an official OilQuick dealer and service partner. We are an official Weber MT dealer and service partner. We are an official Holp dealer and service partner. We are an official DMS dealer and service partner. We are an official Seppi M. dealer and service partner. We are an official JCB construction equipment dealer and service partner. We are an official Mercedes-Benz dealer and service partner. We are an official Iveco dealer and service partner. Furthermore, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. Subject to prior sale and errors excepted! = Additional information = Intended use: Construction Please contact Marius Herden for more information.

Condition: new, working width: 125,000 mm, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. H7 125 Flail Mower / incl. floating linkage / NEW unit / in stock & immediately available Price: €13,890.00 net / €16,529.10 gross - Working width: 125 cm - Total width: 140 cm - Depth: 97 cm - Height: 57 cm - Weight: 410 kg - Mulches grass and light brush up to 7 cm Ø - For excavators from 5 to 15 tonnes - Universal mounting interface for installing various adapter plates - S420: double-walled housing made of high-strength S420 steel - WEARPLATE: housing with replaceable wear plates - LOW PROFILE: low design - Indirect V-belt drive with 4 V-belts - Drive designed for hydraulic motor depending on the carrier’s hydraulic flow - 4D ROLLER: reinforced support roller, 152 mm in diameter, with double-cone roller bearings, height-adjustable - COUNTER CUTTERS: two rows of replaceable drop-forged counter blades - Rotor wall thickness: 12.5 mm - Front guard with chains - Rear guard made of rubber - Color: red RAL3020 · anthracite RAL7021 OPT 371 HELIX ROTOR TECHNOLOGY - Triple helix rotor with SMO flails (standard) - 12 pieces, part no. 130.02.001 OPT 291 VARIO FLOW - Axial piston hydraulic motor with variable displacement 29-58 cm³ and pressure relief valve - Displacement in cm³ (min-max): 29 - 58 - Required hydraulic pressure in bar (min-max): 100 - 300 - Required hydraulic flow in l/min (min-max): 55 – 150 OPT 099 Floating mounting (parallelogram linkage) OPT 555 Oscillating adapter Three hydraulic lines are required: pressure, return, and drain/oil leakage. Option: MS08 adapter plate incl. bolts and installation = €750.00 net Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. Our warehouse offers a very large selection of various Seppi M. products, all available immediately! Mr. Herden (phone) will be happy to assist you. Hjdpfx Ajyix Hajcvjk We can also provide you with a financing offer upon request. We are an official sales and service partner for: - Westtech - OilQuick - Holp - Magni telescopic handlers - DMS - Gierking GMT - Weber MT - Seppi M. - JCB construction machinery - Mercedes-Benz - Iveco In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply you with the complete Seppi M. product range! Errors and prior sale excepted. = Further information = Please contact Marius Herden for more information.

Condition: new, For inquiries regarding the attachment, please contact Mr. Herden (by phone). Seppi M. BMS-F 125 Forestry Mulcher / incl. rotary actuator / NEW / in stock & available immediately Price: €28,390.00 net / €33,784.10 gross Working width: 125 cm Overall width: 153 cm Depth: 105 cm Height: 72 cm Weight: 780 kg - Mulcher attachment for excavator mounting, suitable for mulching along riverbanks, in forests, next to railway tracks, and other hard-to-reach areas - Mulches bushes and wood up to 20 cm diameter - Suitable for excavators from 10-20 tons - Compatible with various mounting plates - Drive designed for hydraulic motor depending on carrier’s oil flow rate - Indirect V-belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge along the entire hood length - Front protection with chains - Rear protection with chains - Height-adjustable skid shoes, reinforced with carbide plate - Colour: red RAL3020 · anthracite RAL7021 OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools Hjdeyii T Iepfx Acvek OPT 228 Rotor with fixed MINI DUO tools (2 carbide inserts) - 27 pieces, spare part number 176.02.005 OPT 465 M-BOOST Bent-axis piston motor - With automatic displacement adjustment 60-80 cm³ and pressure relief valve - Displacement in cm³ (min-max): 60 - 80 - Required pressure in bar (min-max): 200 - 350 - Required hydraulic flow rate: 100 - 150 l/min OPT 372 hydraulic 190° rotary device OPT 158 hydraulically adjustable hood - 24V solenoid valve for opening the rear hood A separate hydraulic unit is recommended for operation. The rotor requires 3 hydraulic lines: pressure, return, and leakage oil. The unit is supplied without hoses, couplings, and mounting plate. We have many adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and available immediately. We have a very large selection of various Seppi M. products in stock and ready for immediate delivery! Mr. Herden (phone) is happy to assist you. We are happy to provide a financing offer upon request. We are official sales and service partner for Magni telehandlers, Gierking GMT, OilQuick, Weber MT, Holp, DMS, Seppi M., Westtech, JCB construction machinery, Mercedes-Benz, and Iveco. Additionally, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range! Errors and prior sale excepted! Empty weight: 780 kg Please contact Marius Herden for further information...

Condition: new, For inquiries about the attachment, Mr. Herden will be pleased to assist you by phone. Seppi M. BMS 125 Forestry Mulcher / NEW / in stock & immediately available Price: €30,690.00 net / €36,521.10 gross - Working width: 1.25 m - Overall width: 1.56 m - Depth: 1.11 m - Height: 0.85 m - Mulching attachment for excavator mounting - Ideal machine for mulching in hard-to-access areas such as roadsides, riverbanks, steep slopes, or for clearing gas and power lines - Mulches brush and wood up to 30 cm Ø - For excavators from 13 to 30 t Hjdpfx Acjyii Tzovjk - For installation on various mounting plates - Drive designed for hydraulic motor, depending on carrier oil flow - Indirect belt drive with 5 V-belts - Reinforced double-walled housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable rear hood - Continuous hinge across the entire hood length - Front and rear chain guards - Height-adjustable support skids in sandwich construction, reinforced with carbide plate - Colour: red RAL3020 · anthracite RAL7021 OPT 468 Rotor with fixed tools with tungsten carbide inserts - 1 x MONO EXTREME V-LOCK L, part no. 19702266 - 33 x MONO TIP V-LOCK, part no. 19702259 - 1 x MONO EXTREME V-LOCK R, part no. 19702267 - Wear-resistant tool holders - Replaceable rotor stub shafts OPT 465 M-BOOST angled-axis piston motor - With automatic displacement regulation 60-80 cm³ and overpressure valve - Displacement in cm³ (min-max): 60 - 80 - Required hydraulic pressure in bar (min-max): 200 - 350 - Required oil flow: 80 - 170 l/min Three hydraulic lines required: supply, return, and drain. The unit is supplied without hoses, connectors, or mounting plate. Many additional adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. We have a very large selection of various Seppi M. products in stock and ready for immediate delivery! Mr. Herden will be pleased to assist you by phone. Financing quote available on request. We are official sales and service partner for DMS, Westtech, Gierking GMT, OilQuick, Weber MT, Holp, Seppi M., Magni Telehandlers, JCB Construction Machinery, Mercedes-Benz, and Iveco. With 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range for you! Subject to errors and prior sale! = More Information = Please contact Marius Herden for more information.

Condition: excellent (used), REMS TORNADO 2010 THREADER Product description: - Reliable, highly efficient machine for threading, cutting, deburring, threading of nipples, rolling - For installations, locksmiths, production plants - Strong, compact, adjustable design suitable for construction sites and workshops - Operating principle: rotating material - stationary tool - Automatic: clamping chuck, universal threading head, lubrication and cooling - Large workspace and chip container Hodpfsv T Truox Acvjk - Adjustable material support - Extremely strong and fast drive e.g.: 2” thread only 15s - Completely maintenance-free gear in a closed oil bath - Two base versions: - portable version on 3 legs, with a removable, large oil tray and chip bowl - T version with a combined, larger oil tray and chip container, for installation on table. A fixed base or a trolley with space for putting away the material, for easy transport, with an optimal working height, stable, as additionally paid equipment - Three high-performance motors to choose from: - a high-performance universal motor, 1700 W, overload protection, rotation speed 53 1/min. - a capacitor motor 2100 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - a three-phase motor, 2000 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - A convenient two-stage foot safety switch with an emergency button, thanks to which the entire body weight is loaded during work - Two automatic clamping holders with self-centering clamping jaws. Quickly and easily clamp and release the material - Self-clamping chucks ensure maximum clamping force - Strong, reliable pump with high delivery capacity - Optimum multi-sided guidance of the threading agent through the die head exactly to the threading location guarantees clean threads and long service life of the die dies, gear and motor - Only one automatic universal die head for all threads, also long ones; automatically opening - with automatic thread length for tapered threads - Fast, easy adjustment of the thread size - Clear thread scale - Easy and quick change of the die dies thanks to their positioning in the clamping part - Reliable, indestructible, high-quality REMS die dies with optimum geometry guarantee very easy entry into the material, easy threading and clean threads. They are made of load-bearing, specially hardened steel for an exceptionally long service life. - Self-centering pipe cutter. Sturdy frame made of forged steel. Ergonomic, wide handle for strong spindle pressure - Specially hardened cutting wheel made of reliable, tough-hard knife steel ensures long service life. - Internal deburrer, Stable, easy-to-use deburring device with variable deburring position. - Specially hardened and machined blade guarantees easy deburring and exceptionally long service life - Two blades for optimum deburring, especially with small pipe diameters

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2024, next inspection (TÜV): 06/2026, Tipping ram: Hyva, chrome-plated tipping ram matel - stroke 7100 mm - tipping warning signal, connection: 1" hydraulic connection with thread and hydraulic hose: 2.2 m long with 1" (inch) screw connection - female! Cranked aluminum chassis, aluminum body with tunnel, steel support legs, SAF off-road axles, 1st axle lift axle, 6x 385/65 R22.5 Bridgestone RT tyres, 1 towing hitch, round LED rear lights, 2+1, quick-release tarpaulin lock. Toolbox, removable step ladder, 2 shovel holders (outside), 25L water tank, ASW in front cargo area, pneum. Vibrators at the front of the floor with control valve on the left side, grain bunker with brackets on each grain chute lBin smooth side walls - Double-walled longitudinal hollow chamber profiles - Vertical gradient inner thickness (3 mm at half height) - Inner length 9.50 m - Inner usable height 2200 mm - Inwardly beveled top chord profiles, floor trough with tunnel - Floor thickness 5mm, Inside usable width (mm) 2410, floor reinforcement struts - Doubling of the top chord profiles - Front wall 14° sloping front wall - Thickness 4mm - Conical recess and reduced to 450mm interior space Door Universal door - Double linkage locks - Folding upper crossbar - 2 door leaves - 1 grain slider with protective cover in each leaf - Rubber seal on the leaves and on the rigid frame, Door wing type Smooth-walled door wings Continuous welds on the inside of the door, roller tarpaulin system - White transparent strips - Side tensioning straps - Round aluminum roof bows (100mm spread) - Rounded upper part, hinged, adjustable, removable, foldable on the side - Aluminum forged MULTIFUNCTION Tarpaulin stops (straight - offset - foldable), Tarpaulin pole Yes Half locking bar - Door lock Pneumatic automatic unlocking of the swing frame with 4 hooks Upper door hinge Swing flap upper aluminum Double ratchet - Removable Integrated in the side wall height Grain pusher Right & left (aluminum) Hedpfx Acsrt N Sfsvok

Condition: good (used), Forged gripper, manipulator forged gripper, sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws Hsdpfodavnzjx Acvok -Span: 0 to 250 mm -Load capacity: 1,000 kg -Quantity: 1 piece available -Dimensions: 730/240/H860 mm -Weight: 118 kg

Condition: good (used), Forged gripper, manipulator forged gripper, sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Manufacturer: VEB, Material gripper type B04-Z10-1 -Load capacity: 1,000 kg -Wingspan: see photos -Dimensions: 280/190/H320 mm -Weight: 21 kg Hjdpfx Ajlntntocvok

Condition: used, Friction press, flywheel press, forging press, screw press, used machine Manufacturer: ASJ Type: J53-160B Overall dimensions: Width: 1850 mm Depth: 1380 mm Height: 3140 mm Weight: 8190 kg Table size: 560 × 510 mm Clear opening without table: 560 × 560 mm Clear opening with table: 260 mm Nominal pressure: 160 tons Stroke length: 360 mm Hedpjxpf U Aofx Acvjk

Condition: new, Year of construction: 2025, machine/vehicle number: 618621425, Marini Magnum 140 mobile asphalt mixing plant year: NEW capacity: up to 140 t./h 1 year guarantee - calorific power of the fuel 9,600 kcal / kg, - material passing through the #8 (2,38mm) sieve is no more than 20%, - The equipment was developed in order to facilitate the transportation as much as possible without the need of pilot cars. Simply hook up the equipment to the asphalt binding agent storage and fuel system. - Chassis is built with a highly resistant I-Beam with a forged king pin, 3 axles with special tires, suspension springs, air brakes, tank, and safety valve, highway signaling system, mechanical foot with telescopic support. Quadruple feed bin (two-by-two) with 3,80mm wide opening and a capacity of 6m3, completely designed to support the strains during the unloading of materials. Regulated floodgate for flow of aggregates. - Automatic vibrator system for one bin, which facilitates the flowing of fine aggregates with high humidity ratios in one of the bins. - Feeding belts with 20\" wide canvas supported by 4\" rollers in \"V\" with permanent lubrication. The gear box is hooked directly to the drum shaft. Drums are regulated with oscillating and shielded bearings. 3-hp electric motor. - Conveyor belt in U-Beam, 24 wide canvas supported by 4 rollers in V shielded rollers actuated by an electric motor. - Sieve with a screen for eliminating oversized materials. - Drum dryer and mixer with heat insulation, four driven supports rollers made of high carbon steel driven by gear box, electric motor 15hp. - rotational external mixer - burner with fuel spraying by gear pump Kcal/h - Dry filtering system that consists of dust collecting system - Control system Sistex Hjdpjhd I T Ssfx Acvjk Other options and accessories Control system, control room, dust filter/dust collector Further information Purpose: construction, Usable material: asphalt, General condition: very good, Technical condition: very good, Visual condition: very good,

Condition: good (used), total width: 375 mm, total length: 430 mm, total height: 95 mm, 2 magnetic Tables and 1 controll unit  Electropermanent magnetic clamping system Clamping all kind off jobs such as; Hedpjwq Rutofx Acvsk Face milling, lateral drilling, Round bar facing and slots drilling Coupled parts machining ans forged parts machining Edge milling and chamfering plates machining on right angle Flattening through drilling and pocket execution Seperate MCC Control box with quick connection Table Length: 430mm Table Width: 375mm Table Height: 95mm Number of poles:56 Length: 375mm Width: 430mm Height: 95mm Weight: 350kg

Condition: new, ADVANCED FILTERING SOLUTIONS: Filtra.4 made by EUROMAQUINA Filtra4 is the optimal filtration system to achieve a high degree of filtration and purification of industrial liquids. Design and implementation of complete turnkey systems IT ELIMINATES THE IMPURITIES that affect the quality of the emulsion. • Mechanical chips & swarfs • Floating solid elements • Insoluble oils (from greasing, oil carried by raw material, hydraulic oils, oils from slides, etc.) Hodswq Ngujpfx Acvok APPLICATIONS of Filtra4 Filtra4 is the optimal solution for various sectors such as: • Tube: both welded as Seamless • Machining centers: grinding, turning • Bars: turning, straightening and polishing • Steel transformation / forming plants • Forging or cold stamping IT IMPROVES THE EFFICIENCY of uour industrial processes 1. No consumables It completely eliminates the use of expensive consumables such as filtering paper or mesh. Filtra4 is an automatic filter that does not require consumables, saving both operating costs, and waste management by extracting them separately. 2.“Zero” maintenance Thanks to its internal self-cleaning system, Filtra4 remains in optimal condition without requiring maintenance intervention. With Filtra.4, you enjoy continuous operation and increased operational efficiency, without concern for maintenance tasks that cause downtime. 3. High degree of filtration Filtra4 offers highly efficient multi-stage filtration that ensures accurate separation of floating particles and non-soluble oils. 4. Full-surface rotating skimmer Our rotating skimmer allows complete separation and removal of undesired oil contaminants. 5. Automatic mixing addition Forget about adding oil manually. Our system allows to add the necessary amount of soluble, with the desired % of oil. 6. Single or integrated Filtra4 adapts to your needs. It can be integrated into an existing production line to optimize its performance, new and individualized for a specific equipment or centralized to supply multiple lines, providing the flexibility and efficiency that your industry demands. For detailed information, visit our dedicated website: No consumables: Automatic filtering without the use of consumables such as paper or filter mats “Zero” maintenance: Internal self-cleaning system High degree of filtration: Multi-layer filtration with separation of sludge, fine particles and non-soluble oils Full-surface rotating skimmer: Complete and separate removal of contaminating oils Automatic mixing addition: with the desired % of oil Individual or integrated: Can be integrated in one line or centralised for several production lines

Condition: used, Technical details: temperature max.: 800-900 ° muffle size (length): 700 muffle size (width): 300 muffle size (depth): 300 mm total power requirement: 90 kW weight of the machine ca.: 0,13 t Small chamber forging furnace. Hjdpow Rkulofx Acvek In 2017, the refractory bricks inside were renewed for €5,000. *

Condition: used, Technical details: diameter: 20 mm workpiece length: - mm Hodpow Rkybofx Acvjk total power requirement: 2,3 - 3,0 kW open-circuit voltage: 2,8 V frequency: 50/60 Hz power consumption: 3 kVA connection voltage: 230 V control voltage: 15 (Gleichstrom) V dimensions of the machine ca.: 1,0 m weight of the machine ca.: 30 Kg dimensions L x W x H: 395 x 275 x 255 mm The crack tester consists of a portable housing with control and display elements, as well as connection cables for magnetization and a power plug. Area of application The crack tester is designed for surface crack testing of weld seams, large forged and cast parts, machine components, but also as a power unit for stationary crack testing benches. Only ferromagnetic workpieces can be tested! During magnetization, the workpiece must be sprayed with a test fluid (test medium). Defects can then be detected under UV light (UV lamp). *