Used Biesse Edgebander for sale (310)

Condition: ready for operation (used), Technical characteristics Single column unloader with suction cups. It is suitable for unloading in machining lines requiring machines with reduced dimensions. BODY OF THE MACHINE The machine is composed of a vertical column, a horizontal bracket fixed to the carriage, a carriage fixed to the bracket and a suction cup holder frame unit. The carriage slides on linear guides equipped with ball bearings and is driven by a gear motor controlled by a frequency variator. SUCTION CUPS PANEL COLLECTION GROUP It consists of a suction cups row containing 10 suction cups with bellows to facilitate the separation of the panel. Suction cup diameter of 95 mm. The suction cups are operated by a vacuum pump with a flow rate of 22 m3/h. ELECTRICAL CABINET The machine is equipped with a separate electrical cabinet, managed by a PLC operating logic. PROTECTIONS FOR THE PREVENTION OF WORK ACCIDENTS The machine is protected on all the action perimeter of the suction cups group by protective panels. The battery insertion area is protected by a grid with button opening. DIMENSIONS OF THE WORKABLE PANELS : Length: 320 to 2700 mm Width : 250 to 700 mm Thickness : 12 to 50 mm Maximum weight : 50 kg Pneumatic brake idler roller LOAD TRANSFER IN SINGLE LONGITUDINAL ROW Transfer of introduction with inclined rollers to the left, covered in PVC. The rollers are driven by small belts activated by a gear motor under the control of a speed variator. The transfer is also equipped with a left hand guide adjustable by handwheel. Structure The structure is made of welded steel, reinforced to ensure maximum stability and precision during the operating phases. Work surface Hfodpsk Rticsfx Ah Hjp The worktop is made up of a transfer in four independent sections. The first section includes : An input transfer with flat belts driven by an asynchronous motor controlled by a frequency converter The second and third sections (drilling planes) each include: A belt transfer with: flat belts driven by asynchronous motor controlled by frequency converter A lateral reference guide, installed on the left side of the machine, with lateral stop function Pneumatic end stops for the positioning of right and left panels A lateral presser guide to guide and clamp panels of different widths against the lateral reference stop. The fourth section includes: a belt transfer for the evacuation of the panels with : flat belts driven by asynchronous motor controlled by frequency checker. Machining center The first center consists of a mobile carriage along the X axis on which two independent drilling heads are installed along the Y and Z axes. Each drilling head is composed as follows: In the X direction, 10 independent vertical chucks In the direction of the Y axis, 9 independent vertical mandrels The second center consists of a mobile carriage along the X axis on which two independent drilling heads are installed along the Y and Z axes. Each drilling head is composed as follows: In the X direction, 10 independent vertical chucks In the Y direction, 9 independent vertical spindles. Each operating head is suitable for the installation of an additional operating unit to be chosen as an option Axis movements Precision linear guides with circulating ball bearings and brushless motors for X,Y,Z axes. Rectified helical rack coupled to two pinions to allow the recovery of the play along the X axis. Hardened and ground ball screw (Y,Z axis). Pneumatic balancing device (Z axis) of the drilling unit. Numerical control XNC model bas

Condition: used, Xp 600 Numerical Control with Biesse Works Software Working range in X axis 3000 mm Working field in Y axis 1000 mm Working field in Z axis 60 mm Hsdpfxsuickye Ah Hefp Automatic loading system with motorized belt transfer N° 2 Pliers for blocking and transporting the panel N° 1+1 vertical electrospindle 3 axes (lower + upper) N° 1+1 independent blade (lower + upper) N° 29 + 29 independent spindles for vertical drilling in "X and Y" direction (upper + lower) N° 10 + 10 independent spindles for horizontal drilling in "X and Y" direction (upper + lower) Automatic unloading system with motorized belt transfer

Condition: used, machine/vehicle number: 007811, Position 1: Panel Feeding and Loading BIESSE - RBO-STREAM SB Position 2: Double Sided Squaring/Edgebanding Machines BIESSE - RBO-STREAM SB Position 3: Panel Turning Device BIESSE - RBO-STREAM SB Hsdpfxov Dyxce Ah Hofp Position 4: Double Sided Squaring/Edgebanding Machines BIESSE - RBO-STREAM SB Position 5: Automatic Drilling Machine BIESSE - RBO-STREAM SB Position 6: Automatic Drilling Machine BIESSE - RBO-STREAM SB Position 7: Panel Turning Device BIESSE - RBO-STREAM SB Position 8: Panel Stacking and Offloading BIESSE - RBO-STREAM SB

Condition: used, Year of construction: 2003, BIESSE FDT THROUGH-THROUGH DRILLING MACHINE price: 20,000 €/net Working area along the "X" axis: max 3200 mm min 215 mm Thickness of processed elements max 65 mm min 9 mm Height of worktable from the floor: 900 mm 2 pcs. horizontal heads, each with 2 drilling heads with 11 spindles, activated by a 1.1 kW (1.5 HP) motor. Each unit includes: • 2 11-spindle drilling heads with a quick change system with a 32mm spacing, without handles. Each head is activated by a 1.1 kW (1.5 HP) motor. • Quick manual positioning of the front heads (Y1) along the screw guide by a crank for correct setting. • Pneumatic stroke activation with scale, for manual depth setting. • Switch for manual stroke execution • Pneumatic drilling speed setting • Max. distance between first and last spindle of horizontal head 704 mm • Max. Horizontal head stroke in the “Z” axis 5-40 mm 5 pcs. Lower vertical head Width 96 mm with 2 motors (each with 1.8 HP). Electronically activated drilling cycle. Hedpfx Ajwpq Hmsh Hjfp The head is equipped with: • Device for quick head change with the possibility of rotation, every 90°. • Quick positioning of heads along the beam (X axis) on a toothed guide with a gear wheel and encoder indicating the position; 2 roller guides; mechanical locking, pneumatic unlocking • Quick positioning of each head in the transverse direction (Y axis) using a ball screw and an encoder indicating the position; 1 roller guide; mechanical locking – pneumatic unlocking • Electronic activation via brushless servo motor; drilling parameter control via NC

Condition: ready for operation (used), Technical characteristics X axis travel : 3290 mm Y axis travel : 1100 mm Z axis travel : 326 mm Part passage : 170 mm Electrospindle : 5-axis spindle, 11 kW HSK F63 chuck Revolver-type tool magazine, 16 tool holders Tool magazine at end of work surface, 10 tool holders BH26 2L drilling unit : Vertical and horizontal drilling unit + grooving unit Hfodpfxeuaz H Ij Ah Hsp 16 vertical drill bits, 32 mm centres (8 X-oriented and 8 Y-oriented) 8 horizontal drill bits, 32-mm pitch (4 X-oriented and 4 Y-oriented) 2 grooving blades, diameter 120 mm, for grooving in X and Y (useful cut 25 mm) Independent Z drilling unit to optimize machining times Work surface : NC-controlled worktable with motorized moving beams 6 ATS beams with automatic positioning (EPS) and suction cups 3 steerable suction cups with motorized movement per beam 1 Vacuum pumps 250 m3/h Controls : On Windows PC RM850 remote control with integrated LCD screen 2 pedals for cycle start Controlled by BiesseWorks software BiesseWorks Advanced software machine version: Programming and optimization of drilling, cutting, milling, toolpaths and tool changes Customized parametric macros Network and/or USB file imports 3D part and toolpath simulator Parametric programming of the workpiece Collision management Tooling set and parametric cones supplied Power and Motors Voltage: 400 V Pluging: Three-phased Power: 17 Kw Motor: 18 CV Overall dimensions Lenght: 5412-5912 mm Width: 5120 mm Height: 2910 mm

Condition: used, Year of construction: 2017, Numerical Control with B-Solid Software - 3D CAD-CAM program to design, simulate, and manage processes of machining of Biesse machining centers and drilling machines BNest Software - Software module dedicated to processing in Nesting mode that allows you to create projects containing the list of articles with the quantities to be produced and the list of plates to be used with the aim of minimize the material used and processing times Working field in X axis mm 4300 Working range in Y axis mm 2200 N ° 2 work fields Nesting work plan Automatic loading system with side lift table Panel detachment system with 2 suction cups N° 1 vertical 3-axis electrospindle, Kw 13.2, with automatic tool change, Hsk cone type Automatic tool change system with 16 positions - positioned on the rear of the machine Hfedpfxet Ul Dnj Ah Hsp BH 10 boring head with 10 spindles arranged as follows: - N ° 5 vertical in X axis - N° 5 verticals in Y axis Automatic unloading system with motorized belt Worktop cleaning system Printing and application system of adhesive labels with labeling machine, 22" monitor, keyboard and mouse with dedicated PC Protection and safety system with perimeter grids Safety system with bumper Automatic lubrication system Air conditioning system for cooling and cleaning the machine control N° 2 vacuum pumps 250 m3/h Installed power Kw 31

Condition: used, machine/vehicle number: 007565, X axis working area: 3200 mm Hjdpfxewuclls Ah Hsfp Y axis working area: 900 mm Main Electrospindle power: 4.5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 16

Condition: ready for operation (used), Technical characteristics Cutting dimensions: 3800 x 3800 mm Max. blade projection from work surface (cutting height): 80 mm Main blade max. diameter 320 mm, motor 7.5 kW Scoring blade max. diameter 200 mm, motor 2.2 kW Blade carriage speed adjustable from 5 to 60 m/min Pusher feed up to 40 m/min Automatic lateral alignment device 4 air-cushion unloading tables, dimensions 2000 x 650 mm with rounded profile 6 pneumatic grippers (positioned at 50-360-990-1740-2490-3240 mm) Windows PC-based control 3800 mm pusher stroke Remote Start cycle pusher, including emergency pusher Kit for automatic blade protrusion and controlled presser opening QUICK CHANGE device (quick blade release) DIGISET function Power and Motors Voltage: 380 V Pluging: Three-phased Hedpfx Ahsucithe Hsfp Overall dimensions Weight: 3950 Kg

Condition: used, Year of construction: 2019, Smart Touch Numerical Control with Sintra HD Software Panel height 10 - 60 mm 22 mm solid wood Pvc / Abs mm 3 Feed speed up to 25 meters / min Working height electronically adjustable by C.N. Motorized rubber belt with higher pressure Motorized and electronically adjustable panel support guide by C.N. Side roller conveyor with idle wheels for panel support ADZ-700 anti-adhesive group Rectifier unit with 2 electronically adjustable motors by C.N FI-502 Lamps to heat the edge of the AdIRL-700 panel Reel holder plate at 1 position Gluing unit for EVA hot melt glue with QM-705 glue pot Additional glue tank Edge pressure group on straight profiles with electronically adjustable pressure rollers by C.N. Anti-adhesive group End trimming unit with 2 IN-801 motors Offset trimming / gleaning unit with 2 motors electronically adjustable by C.N RF400 PRO-NESTING KIT for gleaning unit Hfodpjr Ip Sdofx Ah Hjp Non-stick group Rounding unit with 2 multifunction motors (gleaner + rounder) AR30 NC LPT-700 non-stick liquid application system Electronic edge scraper unit electronically adjustable by C.N RB400 PRO-NESTING KIT for edge scraper group RCC-701 glue scraper unit Brush group "SP-501" "PH-700" hairdryer group

Condition: ready for operation (used), Technical characteristics Description : SELCO panel saw TYPE EBTR 120 Twin Pusher - 5600 x 2200 mm Numerical panel saw, with two independent automatic loading stations and electromechanical precision lifting table Principal technical characteristics Max cutting length : 5600 mm Max auxiliar pusher course : 4300 mm Max blade height from table level : 122 mm Max clamps opening : 110 mm Lifting table with direct loading : 5600 x 2200 mm Min panel dimension on loading position : 2440 x 1220 mm Min panel thickness from loading table : 10 mm Main blade motor 18,5 kW / 50Hz (25 Hp) Incisor blade motor 2,2 kW / 50 Hz (3 Hp) Brushless motor for blade chariot - Speed 1 -150 m/min Brushless motor for main pusher – Max speed 100 m/min 2 back rollers lateral alignment device with automatic positioning (60 mm to 2200 mm) Turning platform for automatic pre-cuts with 4 pile blocking device Auxiliar pusher TWIN PUSHER Main blade Ø 430 mm Incisor blade Ø 200 mm 4 pneumatical clamps with independent lifting in the transversal area for main pusher (placed at 70, 180, 390, 600 mm from the squaring line) 4 pneumatical clamps with independent lifting in the longitudinal area for main pusher (placed at 2235, 3845, 4650, 5450 mm from the squaring line) 4 pneumatical clamps with independent lifting in the auxiliar pusher (placed at 70, 180, 390, 600 mm from the squaring line) Air cushion rounded work plan 2050 x 850 mm for width optimization placement allowing simultaneous transversal cutting of several bands 4 air cushion tables 4 front transversal pre-aligning devices direct on the pile turning station 2 front and longitudinal pile aligning devices after the rotation Lifting loading table Auxiliar pusher for simultaneous different cutting phases, synchronized with main pusher The 2 pusher are managed by a software, which depending on the cutting instructions, selects the clamps of different pushers so that the insertion in the cutting zone is optimized to realize as many simultaneous cuts as possible The auxiliar pusher has 4 independent clamps and can be equipped with a fifth one (option). Automatic cut panels evacuation Heavy single structure, Industrial chassis, strong stability Cemented and calibrated chariot guiding rails, which supports the main blade and the incisor blade Les 2 pousseurs sont gérés par un logiciel qui, en fonction du schéma de découpe et des phases d'usinage nécessaires, sélectionne les pinces des divers pousseurs à Insérer dans la zone d'usinage afin de réaliser le plus grand nombre possible de cycles de découpe simultanés. Expulsion automatique des panneaux coupés Pressor group Lateral alignment group with 2 independent rollers The turning station has a lifting platform turning the panel pile at 90° which is held in place with blocking devices. The pile is then aligned by the front devices When the pre-cutting cycle is over the main part of the pile is returned again at 90° on the turning station, and the pre-cut part is sent to the transversal cutting operation PC Windows XP, 17" screen With cutting profiles, lists, manual cutting, simulation, diagnostic, online help, maintenance, statistics and settings Hodsucitnjpfx Ah Hsfp Software and applicancies: "OPTIPLANNING" Pro Version software : Great number of cutting lists (including different types of material) allowing “all at once” optimization "IMPORT FILE" function Editing on external device and import files on machine PC. Automatic management of panel piles and waste material Panel stock and

Condition: used, Year of construction: 2015, Numerical Control NC 1000 Software Biesse Works Working field in X axis 4300 mm Working field in Y axis 2205 mm FT nesting full plane worktable Automatic loading system with side lifting table Automatic labeling machine for barcode printing Automatic printing and application system of adhesive labels N ° 1 vertical electrospindle, with automatic tool change, HSK F63 Blade unit integrated in the drilling head on X axis - diam. 120 mm Blade unit integrated in the drilling head on Y axis - diam. 120 mm Automatic tool change system with 8 positions - positioned on the machine operating head Automatic tool change system with 21 positions - positioned on the rear of the machine with chain BH 20 boring head with independent spindles arranged as follows: - N ° 8 vertical in X axis - N ° 8 vertical in Y axis - N ° 4 horizontal in X axis - N ° 4 horizontal in Y axis Automatic unloading system with motorized belt Front protection and safety system with carpets and perimeter nets Automatic lubrication system Air conditioning system for the electrical panel Vacuum pumps Hsdpfswt Snyjx Ah Hjfp

Condition: ready for operation (used), Technical characteristics 3-axis spindle, 11 kW, 1000 to 24000 rpm 10 Y / 10X vertical drilling unit 6 X / 2 Y horizontal drilling unit XNG digital control 8-position on-board tool loader + pick-up loader on frame Machine to be restarted dimension plan de travail en Y1640 mm Dimension plan de travail en X3430 mm Caractéristiques usinageDrilling unitOnboard tool chargerNesting table Power and Motors Overall dimensions Hfedpfx Aet Rrdaoh Hsp

Condition: used, Year of construction: 2013, Working center with automatic robot for panel loading and unloading management Biesse XP600 Numerical Control with Biesse Works ADVANCE graphic interface software - machine version and version office - WRT technology (Widows real time) the machine control logic is processed directly on the PC and not on a dedicated special device Working field in X axis 6200 mm Working range in Y axis mm 1552 Working field in Z axis 180 mm Z axis travel mm 235 N ° 2 work fields in X axis Bar worktop \ console No. 10 EPS electronically adjustable bars for suction cup support N° 8 pneumatic bakelite bars for lifting the panel - loading / unloading aid N° 4 EPS electronically adjustable suction cups for each bar with vacuum seal for fixing the panel during the processing N° 1 vertical electrospindle, with automatic tool change, motor KW 12 - 12000 RPM - flange for aggregates - preparation for C-Axis Vector Automatic tool change system with 12 positions - positioned on the machine head BH35L boring head with spindles arranged as follows: - N° 14 verticals in X axis - N° 10 vertical in Y axis - N° 6 horizontal in X axis - N° 4 horizontal in Y axis Independent blade for making grooves in the X axis - diam. 120 mm Front protection and safety system with carpets Perimeter protection grids Automatic lubrication system Machine control cooling and cleaning system with conditioner Vacuum pump mc / h 250 Kuka industrial robot with 6 articulated axes with point-to-point positioning. Hodpfx Askvrxuoh Hefp Independent control panel Panel alignment table Barcode reader on the robot arm Panel introduction system via: * 1 motorized roller conveyor for panel stack preloading * 1 translating motorized roller conveyor * 1 motorized panel stack unloading roller conveyor Technical features: * Type : KR210-2 * Number of axles : 6 * Admissible nominal load : Kg 210 * Machine weight : Kg 1267 * Sound level: 75dB * Installed power: 25.8 kW * Panel dimensions - Min\max length: mm 300\3000 * Panel dimensions - Min\max width: 180\1500 mm * Panel dimensions - Min\max thickness: 8\60 mm * Max panel weight: Kg 90

Condition: ready for operation (used), Technical characteristics 8 suction cup beams + vices Electrospindle 10.5 CV ISO 30 8 on-board tool carrier charger 20 vertical spindles and 4 horizontal spindles drilling unit Machine to be restarted dimension plan de travail en Y1630 mm Dimension plan de travail en X3430 mm dimension plan de travail en Z185 mm Nombre de poutres8 Caractéristiques usinageEvacuation conveyorVacuum pump Capacité pompe à vide100 m3/h Power and Motors Overall dimensions Hjdpfxotqkbbs Ah Hsfp

Condition: used, Year of construction: 2017, Osi Plus Numerical Control QUICK OPTI software for cutting pattern optimization directly on the machine Cutting optimization software OPTIPLANNING PROFESSIONAL version Barcode Label Printer - OS-Labelling Additional key for office programming software Electrical cabinet air conditioner Cutting length mm 4400 Cutting width mm 4300 Blade projection 90 mm Manual front panel loading Lateral aligner integrated into the blade carriage No. 1 fixed front bakelite table with air curtain system for unloading the panels (mm 2050 x 850) No. 3 adjustable front bakelite tables with air curtain system for unloading the panels (mm 2050 x 650) Main blade group (max. blade diam. / power) 355 mm / 11 kW Engraving group (max blade diam. / power) 200 mm / Kw 2.2 Adjustable speed of the blade carriage Pusher carriage with 9 clamps Blade carriage speed 120 m/min Twin Pusher 1.2 system with 1 additional clamp on pusher carriage (position 570 mm) to perform different patterns cutting at the same time TECHNICAL DETAILS TO BE CHECKED Hedpsvtbzkefx Ah Hjfp

Condition: used, Year of construction: 2009, Biesse Works Control Working range on X axis mm 3500 Working range on Y axis mm 1585 Working stroke in Z axis mm 350 N ° 2 work fields Bar worktop No. 8 adjustable bars N° 4 pneumatic Bakelite bars for lifting the panel No. 3 adjustable suction cups for each bar with vacuum seal for fixing the panel during processing No. 1 4-axis vertical electrospindle (Vektor), with automatic tool change, HSK type cones 10-position rotary tool change system on the operating head 24-position chain tool change system - located on the rear of the chain machine Drilling head with vertical and horizontal spindles composed as follows: n. 12 vertical spindles in X n. 12 vertical spindles in Y n. 6 horizontal spindles in X n. 4 horizontal spindles in Y n. 1 independent blade for making X-grooves Front protection and safety system with carpets Perimeter protection grids Chip evacuation system with motorized belt Air conditioning system for cooling and cleaning of machine control Vacuum pump 250mc/h TECHNICAL DETAILS TO BE CHECKED Hfedpow D Dhasfx Ah Hjp

Condition: used, Year of construction: 2009, Numerical Control Sintra Panel height 60 mm Solid wood mm 20 Hsdeh Uhxnepfx Ah Hsfp Pvc / Abs mm 3 Feed speed up to 25 meters / min Working height electronically adjustable by C.N. Motorized rubber belt with higher pressure Motorized and electronically adjustable panel support guide by C.N. Panel introduction table to facilitate the alignment of the input panel Side roller conveyor with idle wheels for panel support Grinding group Coil holder magazine with 2 positions with automatic edge change from C.N. Gluing unit for EVA hot melt glue with pre-melter and glue pot Predisposition for gluing unit for PUR glue Edge pressure group on straight profiles with electronically adjustable pressure rollers by C.N. End trimming unit with 2 motors with automatic inclination adjustment Refilling unit with 2 superimposed motors Gleaning unit with 2 tilting motors Multifunction 4-motor rounding unit (gleaner + rounder) with numerical control adjustment in automatic Non-stick group Adjustable edge scraper group Glue scraping unit Oscillating brush group

Condition: used, Numerical Control NC 1000 Software Biesse Works Working field in X axis 3685 mm Working field in Y axis 1290 mm Working stroke in Z axis 200 mm - piece passage 70 mm FT nesting full plane worktable Automatic loading system with side lifting table N ° 1 vertical electrospindle, with automatic tool change, Automatic tool change system with 18 positions - positioned on the rear of the machine Boring head with independent spindles arranged as follows: - N ° 7 vertical in X axis - N ° 7 vertical in Y axis - N ° 2 horizontal in X axis - N ° 2 horizontal in Y axis Automatic unloading system with motorized belt Front protection and safety system with carpets and perimeter nets Automatic lubrication system Air conditioning system for the electrical panel Vacuum pumps TECHNICAL DETAILS TO BE CHECKED UPON ARRIVAL OF THE MACHINE Hsdpfx Aowufv Teh Hofp

Condition: used, XNC Numerical Control Working range on X axis mm 3400 Working range on Y axis mm 1300 Working stroke in Z axis mm 155 N ° 2 work fields Bar worktop No. 8 manually adjustable bars for suction cup support with display for viewing working heights No. 8 pneumatic bakelite bars for lifting the panel No. 3 manually adjustable suction cups for each bar with vacuum seal for fixing the panel during assembly processing No. 1 vertical electrospindle with C-axis Vector, with automatic tool change, Iso 30 type cones, flange for use aggregates Automatic tool change system with 3 positions for aggregates positioned on the side Automatic tool change system with 20 positions and chain Drilling head with mandrels arranged as follows: - No. 10 verticals on X axis - No. 12 verticals in Y axis - N° 6 horizontal on X axis - No. 2 horizontals on Y axis Front protection and safety system with carpets Perimeter protection grids Motorized carpet for chip evacuation Vacuum pump Hfedpfxev Edggo Ah Hop

Condition: used, Year of construction: 2019, Numerical control with bSolid software The multi-document software application in Windows environment allows the design of the finished product, the definition of its processes, the definition of the work plan, the simulation of the piece machining operations on the 3D model of the machine and generation of the necessary machine programs. bSolid - 3-Axis Machining bSolid - 5-Axis Machining Module for surface machining with 5-axis units and interpolation movements on all 5 available axes (X,Y,Z,C,B). The module includes the following commands: · assignment to surfaces three-dimensional roughing and finishing operations · spread or project a path onto a curved surface machining lying on a plane · follow 2D or 3D curves with any type of tool bSolid - 3D Engraving bSolid - Import external formats Fields of work: X = 5055 mm; Y = 1650 mm (may vary depending on configuration) Z = 200 mm with modules H=74 mm Z = 245 mm with modules H=29 mm Loadable piece in Y: * 1650 mm, with thickness up to 60 mm on H=74 mm modules * 1600 mm, with thickness over 60 mm on H=74 mm modules. 10 ATS floors – 40 trolleys The code includes: • 2 aluminium bars (n. 1 left and n. 1 right) on which the lateral stops slide. • 10 aluminum worktops. The worktops slide on hardened and ground linear guides using recirculating ball bearing slides. Locking occurs on both linear guides, front and rear, by means of four pneumatic cylinders. The control is activated by a button located in front of the work surface. The carriages slide on steel guides positioned above the extrusion. Pneumatic locking system divided into 2 locking zones in X Automatic positioning (EPS) for worktops. "EPS" (Electronic Positioning System) device for the automatic positioning by NC of the work surfaces and trolleys complete with locking devices capable of eliminate possible operator errors. Rear row stop, with 140 mm stroke Intermediate row stop, positioned at 405 mm, with 140 mm stroke. Front row stop, positioned at 1460 mm, with 140 mm stroke 4 lateral stops, with 140 mm stroke (2 right + 2 left) with system 2 additional side stops, with 140 mm stroke (1 right + 1 left). Sensor for checking whether the stops have descended 12 clamping devices for clamping narrow workpieces 6 loading aid bar lifts, for H=74 mm modules Configuration 5A, for Rover B. Configuration for high productivity and flexibility, thanks to the two operating groups 4 and 5 axes and the possibility of performing tool changes in concurrent time. It includes the axes and carriages for the movement of the main operating groups. Includes 2 inverters. Second Y-axis. Introduces the separation of the front and rear Y-carriages, with independent motorization. The two Y-carts have a maximum speed of 118 m/min. 13.2 kW (17.7 HP) electrospindle, HSK F63 connection, air-cooled. Main features: • 11 kW (14.7 HP) from 12,000 to 15,000 rpm in S1 service. • 13.2 kW (17.7 HP) from 12,000 to 15,000 rpm in S6 service. • Bearings ceramics. • Right and left rotation. • Rotation speed from 1,000 to 24,000 rpm programmable by NC. • The release pneumatic operation is carried out via a prismatic linear guide and recirculating ball bearings. A cover is included for chip extraction, with 6 different positions in Z managed by the NC, depending on the length of the tool, or by program. The suction mouth is automatically closed when the electrospindle is not working. Provision for subsequent installation of the 360° operating group (C-axis) Revolver tool maga... Hodsw D E A Eepfx Ah Hofp

Condition: used, Year of construction: 2017, Osi Plus Numerical Control QUICK OPTI software for cutting pattern optimization directly on the machine Cutting optimization software OPTIPLANNING PROFESSIONAL version Barcode Label Printer - OS-Labelling Electrical cabinet air conditioner Cutting length mm 4400 Cutting width mm 4300 Blade projection 75 mm Manual front panel loading Lateral aligner integrated into the blade carriage No. 1 fixed front bakelite table with air curtain system for unloading the panels (mm 2050 x 850) No. 3 adjustable front bakelite tables with air curtain system for unloading the panels (mm 2050 x 650) Main blade group (max. blade diam. / power) 355 mm / 7.5 kW Engraving group (max blade diam. / power) 200 mm / Kw 2.2 Adjustable speed of the blade carriage Pusher wagon with 10 clamps Blade carriage speed 1-120 m/min Pusher speed 60 m/min Twin Pusher 1.2 system with 1 additional clamp on pusher carriage (position 570 mm) to perform different patterns cutting at the same time TECHNICAL DETAILS TO BE CHECKED Hfedpsv Amx Tjfx Ah Hjp

Condition: used, Year of construction: 2017, Numerical Control with B-Solid Software Working range in X axis 3600 mm Working range in Y axis 1800 mm N ° 2 work fields Nesting worktable Automatic loading system with side lifting table Label printing system with automatic application on the loading table Panel detachment system with suction cups N° 1 3-axis vertical electrospindle, 13.2 kW, with automatic tool change, ISO 30 cone type Automatic tool change system with 16 positions - positioned on the back of the machine Automatic tool change system with 8 positions - on the machine BH 10 drilling head with 10 spindles arranged as follows: Hfodpeqvt D Rjfx Ah Hsp - N° 15 verticals on the X axis - N° 17 verticals on the Y axis Automatic unloading system with motorized belt Worktop cleaning system Protection and safety system with perimeter grilles Security system with Bumper Automatic lubrication system Air conditioning system for cooling and cleaning the machine control 250 m3/h vacuum pumps

Condition: used, Year of construction: 2018, Numerical Control BH 660 with BIESSE BSolid software bEdge module for edge management bSolid surface design Sophia - IoT Connection Office control Working range on X-axis mm 3228 Working range on Y axis mm 1580 Working range on Z axis mm 200 with H74 mm suction cups Working range on Z axis mm 245 with H29 mm suction cups No. 8 adjustable ATS panel support bars Installation of the pneumatic lock divided into two zones in Y No. 6 Pneumatic Bakelite bars for panel lifting No. 3 adjustable suction cups for bar Set-Up Assistant for Suction Cups No. 1 electrospindle (pantograph) with 4 axes, automatic tool change, KW 13 (HP 17.4) motor, cooling liquid, HSK cone attachment, 20000 RPM Automatic tool change with 16 positions on the X-axis of the carriage Drilling tesa BH17 independent spindles arranged as follows: No. 5 independent spindles for vertical drilling in the "X" direction No. 5 independent spindles for vertical drilling in the "Y" direction No. 4 spindles for horizontal drilling in the "X" direction No. 2 spindles for horizontal drilling in "Y" direction No. 1 blade integrated into the drilling head diam 120 mm (useful cut 25 mm) GU60L gluing unit for EVA glue with pre-melter - edge pressure system with double rubber roller for spokes maximum internal 30 mm and edge joint sensor - 500 ml glue pot installed on the glue roller - lamp edge heating - edge feed system - edge cutting system - possibility of Introduction of the manual edge Plastic edge thickness from 0.4 to 3 mm Wood edge thickness from 0.4 to 2 mm Laminated edge thickness from 0.4 to 1.2 mm Maximum edge width 65 mm Workpiece thickness from 10 to 60 mm Minimum internal radius workable with 30 mm edging Maximum external radius for edging, proportionate to the thickness and stiffness of the edge: * 10 mm with edge up to 1 mm thick * 20mm with 2mm thick edge * 30mm with 3mm thick edge Hfodsugpwnspfx Ah Hsp Minimum dimensions of the edging panel 300 x 300 mm Minimum internal diameter for edging: 350 mm with plastic edges less than 1 mm thick and with panel maximum thickness 18 mm 2-position edge storage unit positioned inside the protective casings for edges with maximum thickness 65 mm Finishing aggregate cleaning station with automatic dispensing of special cleaning liquids and with a cleaning cycle No. 1 aggregate for edge trimming / rounding No. 1 EF60A combi aggregate trimmer / edge scraper / glue scraper Perimeter protection grids Chip evacuation system with motorized belt Liquid cooling system Automatic lubrication system No. 1 vacuum pump of 250 m3/h TECHNICAL DETAILS TO BE CONFIRMED

Condition: used, Xp 600 Numerical Control with Biesse Works Software Working range in X axis 3000 mm Working field in Y axis 1000 mm Working field in Z axis 60 mm Automatic loading system with motorized belt transfer Hedpspp Thnefx Ah Hefp N° 2 Pliers for blocking and transporting the panel N° 1+1 vertical electrospindle 3 axes (lower + upper) N° 1+1 independent blade (lower + upper) N° 29 + 29 independent spindles for vertical drilling in "X and Y" direction (upper + lower) N° 10 + 10 independent spindles for horizontal drilling in "X and Y" direction (upper + lower) Automatic unloading system with motorized belt transfer

Condition: used, Year of construction: 2023, Numerical Control BH 660 with BSolid Working range on X-axis mm 4320 Working range on Y axis mm 1660 Working range on Z axis mm 200 No. 2 work fields on X axis Bar worktop No. 8 adjustable bars for suction cup support No. 8 pneumatic bakelite bars for lifting the panel No. 3 adjustable suction cups for each bar with vacuum seal for fixing the panel during processing No. 1 5-axis vertical electrospindle, with automatic tool change, liquid cooling, HSK63 type cones, KW 13 (HP 17.4) Automatic tool change system with 16 positions with revolver positioned along the X axis on the back of the machine Automatic tool magazine with 12 positions positioned on the machine side BH24 L drilling head with spindles arranged as follows: - No. 8 verticals on X axis - N° 6 verticals in Y axis - N° 6 horizontal on X axis - N° 4 horizontal in Y axis - N° 1 Integrated blade for making grooves Chip evacuation system with motorized belt Front protection and safety system with carpets Automatic lubrication system Air conditioning system for cooling and cleaning of machine control 250m/c vacuum pump TECHNICAL DETAILS TO BE CHECKED Hfodewgc D Espfx Ah Hjp