Used Biesse Rover 23 for sale (318)

Condition: excellent (used), Year of construction: 2015, For sale: 4 units of CNC ROVER BIESSE 2231. Years of manufacture: 2013, 2014, 2015, 2016. In very good condition. Ljdpfx Alex Tbk Re Iohh

Condition: ready for operation (used), Year of construction: 2021, total width: 5,851 mm, travel distance X-axis: 3,140 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 245 mm, overall weight: 3,000 kg, controller manufacturer: BIESSE, controller model: HH660 PC-based control, spindle motor power: 13,200 W, product length (max.): 7,116 mm, spindle speed (max.): 24,000 rpm, number of axes: 4, This 4-axis BIESSE Rover A 1232 was manufactured in 2021. It features a working area of 3140 mm in the X-axis, 1260 mm in the Y-axis, and a Z-axis travel of 245 mm. The machine is equipped with an electrospindle power of 13.2 kW and a maximum tool diameter of 113 mm. If you are looking to get high-quality CNC routing capabilities, consider the BIESSE Rover A 1232 machine we have for sale. Contact us for further details. • Power supply voltage 400 VAC • Full load current 31.7 A • Number of power supply phases 3 • Installed power 18.66 kW Lhsdpfjy Sglkox Al Ish • Frequency 50 Hz • Short circuit protection rating 10 kA RMS Sym • Working area X 3140 mm • Working area Y 1260 mm • Working area Z 245 mm • Max panel thickness: depends on vacuum module height (H74 / H29) and tooling • Workpiece support length 1200 mm • Vacuum pump capacity 90 m³/h • Vacuum pump capacity 108 m³/h at 60 Hz • Vacuum system dry pump • Electrospindle power 13.2 kW • Electrospindle speed 12000 to 15000 rpm S1 • Electrospindle speed 12000 to 24000 rpm programmable • Tool holder HSK F63 • Rotation clockwise and counterclockwise • Two separate magazines installed: • 8-position tool magazine (rear / Y-axis area) • 13-position tool magazine (main X-axis unit) • Maximum tool diameter 113 mm • Maximum tool length 110 mm • Maximum tool weight 7.5 kg • Maximum total magazine weight 32 kg • Vacuum system:Configurable vacuum pump system. Available configurations include:– 2 × 90 m³/h– 2 × 100 m³/h– 1 × 250 m³/h

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, power: 67 kW (91.09 HP), input voltage: 400 V, input frequency: 50 Hz, workpiece length (max.): 3,100 mm, workpiece width (max.): 2,205 mm, workpiece height (max.): 170 mm, Equipment: documentation/manual, ROVER A FT 2231 Ljdpfx Aeyzxyrel Ijhh

Condition: new, Year of construction: 2022, axis stroke (X,Y,Z) 3100 x 2205 x 170 mm Number of spindle head vertical 0 St. Number of spindles head horizontal 0 St. Number of tools 14 St. Dust suction hood 200 mm Number of milling agregates 1 St. Year 2022 Speed 24.000 U/min. Required air-pressure 7 bar Ledpfx Alsxfwduj Ishh Motor output 9 kW Capacity 2x 250 m³/h Control BH660

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, travel distance X-axis: 5,900 mm, travel distance Y-axis: 1,560 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 60 m/min, rotational speed (max.): 20,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Ledeyxm Swepfx Al Ijhh X-axis working area: 5,900 mm Y-axis working area: 1,560 mm X-axis travel speed: 80 m/min Y-axis travel speed: 60 m/min Z-axis travel speed: 25 m/min Drilling spindles Vertical drilling spindles: 20 Horizontal drilling spindles in X-direction: 6 Horizontal drilling spindles in Y-direction: 2 Total number of vertical and horizontal spindles: 28 Milling spindles Number of controlled axes: 4 Motor power: 10 kW Spindle speed: 20,000 rpm Tool changer Number of positions: 10 Tool: head-mounted MACHINE DETAILS Total installed power: 24 kW Control system: WINDOWS Machine programming software: WRT EQUIPMENT Work table with suction cups Number of suction bar rows: 10 Suction cups for securing the workpiece Vacuum pump The machine is sold and delivered in its actual and legal condition ('as seen and approved') on the basis of photographic documentation and descriptive technical/commercial documents. The buyer is entitled to inspect the item before collection and is responsible for installation, securing and use of the machine at the final destination. External reference: 8173

Condition: used, machine/vehicle number: 008501, Position 1: 5 Axis CNC Routers BIESSE-ROVER A - SYNCHRO Position 2: Panel Feeding and Loading BIESSE-ROVER A - SYNCHRO Lhedpjy Af Hujfx Al Ieh

Condition: used, Year of construction: 2012, total height: 2,400 mm, total length: 13,500 mm, total width: 2,450 mm, Colour: Grey Empty weight: 2.500 kg Biesse Rover A1536 G FR Year 2012 Central lubrifaction FT work table, X 3765 Y 1560, 9 zones 12 kW electro spindle, ISO 30, air cooled Biesse WORKS Biesse NEST MODULE Air conditioner 16 pos. revolver magazine Work area XYZ 3765*1585*170 2x vacu pump 250 m³ C axis 360° BH 17 L drilling group Including loading and unloading system - Year: 2012 Ledpfxswnip Dj Al Ijhh - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 81399 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 3 - Type milling table: Flat table - Tool clamping system: ISO30 - Material clamp system: Pneumatic - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 4 - └ Vertical drilling spindles [pcs.]: 7 - Saw unit present: Yes - Tool changer positions [pcs.]: 16 - System/software: BiesseWorks - Safety feature: Safety mat - Vacuum pump present: Yes - └ Number [pcs.]: 2 - └ Brand: Becker - └ Capacity [m³/h]: 250 - CNC options: Unloading system, Loading system - Table length [mm]: 3765 - Table width [mm]: 1560 - Working range X [mm]: 3765 - Working range Y [mm]: 1585 - Z-axis working range [mm]: 170 - Transport dimensions: 13500mm x 2450mm x 2400mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 4,600 mm, travel distance Y-axis: 1,935 mm, travel distance Z-axis: 275 mm, number of axes: 5, This 5-axis Biesse Rover C9.50 was manufactured in 2007. It features a large working area (X=4600 mm, Y=1935 mm, Z=275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine includes a vacuum system, a conveyor belt for chip removal, and a liquid cooling unit. If you are looking to get high-quality CNC machining capabilities, consider the Biesse Rover C9.50 machine we have for sale. Contact us for more information. Worktable and clamping • 8 ATS plate holders (L = 1525 mm) and 24 slide rails • Automatic positioning of plate holders and slide rails (EPS X-Y) • Pneumatic locking system, divided into 2 working areas in X • 8 rear reference stops, stroke 115 mm • 8 stops, stroke 140 mm, positioned at 1175 mm (L = 1280 / 1525 / 1800 mm) • 8 stops, stroke 140 mm, positioned at 770 mm (L = 1280 / 1525 / 1800 mm) • 4 side stops, stroke 140 mm (2 left + 2 right), with pneumatic system • 4 removable center stops, stroke 140 mm (2 left + 2 right), with pneumatic system • Sensor for detecting lowered stops Lsdpfx Aox D H Hcsl Ishh • Pneumatic system for lifting bar holders • 6 lifting bar holders for easy loading (H = 74 mm modules)Vacuum • Vacuum system for a 250 m3/h pump • 250 m3/h rotary vane vacuum pump for standard vacuum systemMachining units and configuration • Composition C3-A1: • Device for mounting chip deflectors with pneumatic or inductive sensors on a 5-axis machining unit • Flange for mounting units on a work unit with 5 interpolating axes (units usable only when the electric spindle is vertical) • Composition C3-P2: • Additional Z slide for rear work units, controlled by an independent Z axis • 16 vertical and 4 horizontal boring spindles in Y-direction • Chain tool changer with 22 positions (180 mm center distance) • Iron gripper for chip deflector with pneumatic or inductive sensor, positioned in the chain tool changer • RH chip deflector with inductive sensor for standard electric spindle or 15 kW 5-axis electric spindle (requires device for chip deflector; requires flange for mounting units when using a 5-axis electric spindle; requires C-axis when using a standard electric spindle)Systems • Automatic lubrication system • Control unit with 5 interpolating axes Additional equipment • additional refurbished 5-axe main spindel available • Conveyor belt for removing chips and scrap pieces (chip conveyor) • Liquid cooling unit for liquid-cooled systems (can cool two electric spindles, or one electric spindle plus one liquid-cooled drilling head)Note: The technical data and descriptions are taken from the original order confirmation and are for information only; they are not binding.

Condition: good (used), Year of construction: 2002, functionality: fully functional, 4-axis CNC machining center with milling spindle, drilling head, and tool changer Machining area: X-axis: 3,060 mm Y-axis: 1,380 mm Z-axis stroke: 250 mm Clamping table: 6 ATS workpiece supports 3 vacuum cups per workpiece support One digital display per workpiece support for displaying the position of the workpiece support itself or the 3 vacuum cups Vacuum cup positions are stored in the program 4 linear guides for heavy workpieces Vacuum pump capacity: 90 m³/h Tooling: Milling unit with 7.5 kW motor, Speed 1,500 - 20,000 rpm Tool holder ISO 30 Rotation direction: right / left 360-degree C-axis for mounting adapter units Lsdezdnykepfx Al Iohh Tool magazine with 10 positions, mounted on the support and moving in the X-direction Vertical drilling: X-axis: 7 spindles, spacing 32 mm Y-axis: 7 spindles, spacing 32 mm Horizontal drilling: X-axis: 2 + 2 spindles Y-axis: 1 + 1 spindles Nut saw unit fixed in the X-direction Control: NC 1000 with NC HOPS programming software Safety features: * Floor mats in front of the machine * Protective fencing on the right with access door Connection values: 380 V, 50 Hz, 3 phases Weight approx. 3,500 kg Machine supplied without tools and adapter holders.

Condition: ready for operation (used), Year of construction: 2014, number of axes: 4, This 4-axis BIESSE Rover K 1532 G was manufactured in 2014. It is a used CNC machining center designed for precision and efficiency. If you are looking to get high-quality CNC processing capabilities, consider the BIESSE Rover K 1532 G machine we have for sale. Contact us for further details. Lodpfozdi I Ajx Al Ijhh

Condition: ready for operation (used), Year of construction: 2017, number of axes: 5, This 5-axis BIESSE Rover A Edge 1643 was manufactured in 2017. It features a versatile CNC machining center with an edge banding unit, ideal for various applications. If you are looking to get high-quality CNC processing capabilities, consider the BIESSE Rover A Edge 1643 machine we have for sale. Contact us for further details. Lhodezdi Hxopfx Al Ish BIESSE ROVER A 1643 EDGE - Technical Specification Machine type CNC machining center with edge banding functionModel: ROVER A 1643 EDGEDesigned for machining and edge banding of shaped/profiled panels Configuration shown in the documents indicates a 5-axis setup Working area X-axis working area: 4,320 mm Pendulum working in X: 1,620 mm Y-axis working area: approx. 1,580-1,660 mm Z-axis travel: 180 mm Edge banding X-axis working area: 3,300 mm Edge banding Y-axis working area: 1,540 mm Maximum loading width in Y: 1,900 mm, extendable up to 2,100 mm 5-axis unit 5-axis machining headC-axis: continuous 360° rotationB-axis: continuous 360° rotationB-axis speed: 18 rpmC-axis speed: 18 rpmMaximum spindle speed: 24,000 rpmPower:11 kW in S1 cycle13 kW in S6 cycleMaximum undercut angle: -10°Collision control for the 5-axis unitPrepared for aggregate use on the 5-axis unit Work table and clamping ATS work table8 support beams32 movable carriages32 pneumatic vacuum podsVacuum pods adjustable in 15° stepsPneumatic system divided into 2 working zones in X Vacuum pump capacity: 250 m³/h6 lifting beams for easier loading and unloading28 sensors for detecting lowered stopsStops and positioning8 rear stops8 central stops4 side stops, 2 left + 2 right2 additional side stops4 removable central stops, 2 left + 2 right2 additional central stopsPneumatic positioning and lowering of stops Drilling unit BH 24L drilling head13 vertical independent spindles5 horizontal independent spindlesGrooving saw Ø120 mmMaximum grooving depth: 25 mmSpindle speed programmable up to 6,000 rpm Tool changer 16-position rotary tool magazine Mounted on the X-axis carriage For tools and aggregates Maximum tool/aggregate weight: 7.5 kg Total maximum magazine load: 55 kg Edge banding unit GU60A edge banding unit For panels up to 60 mm thick Edge banding speed up to 20 m/min Double pressure roller system Glue tank with hot-melt glue systemEdge heating lamp, 600 W NC-controlled edge feeding system Automatic edge cutting Sensor for closed geometric shapes Edge banding accessories 2-roll edge magazine mounted on the X carriage Maximum roll diameter: 800 mm Maximum edge height: 65 mm Corner rounding tool Ø85 mm, HSK F63 Saw aggregate HSK F63 for cuts and grooves, max blade Ø215 mm Maximum saw speed: 8,400 rpm Maximum cutting depth with Ø215 mm blade: 68 mm Edge trimming units Combined glue scraping / edge scraping units Tool sets for different edge thicknesses Software bSolid basic module 2D CAD environment DXF, CIX and BPP import 3D machine simulation Tool management 5-axis machining management by positioning Wizard-based program creation Safety CE compliant Safety mats Safety barriers Safety sensors Modified safety system allowing loading in Y up to 2,100 mm Summary This is a well-equipped BIESSE ROVER A 1643 EDGE CNC machining center with 5-axis machining head and edge banding package. The documents show B and C continuous rotation, 5-axis programming, 5-axis collision control, and a dedicated aggregate flange for the 5-axis unit, so based on these documents it should be treated as a 5-axis machine.

Condition: used, Year of construction: 2007, total height: 2,500 mm, total length: 11,000 mm, total width: 2,400 mm, Colour: Grey Empty weight: 7.200 kg Price: On request - Machine available from: 2026-06-24 - Year: 2007 - Documentation available: Yes - └ Type Documentation: Technical data, Electrical diagrams, User manual, Assembly manual - └ Language: NL - └ Type: Hardcopy - CE marking present: Yes - CE certificate present: No Lhjdpsy Ipntjfx Al Ijh - Serial number: 97649 - Number of milling spindles [pcs.]: 2 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - - Min. spindle speed [rpm]: 1000 - - Max. spindle speed [rpm]: 20000 - - Main motor power [kW]: 9 - └ Milling spindle 2: - - Number of controlled axes [pcs.]: 3 - - Main motor power [kW]: 18.5 - Type milling table: Beam table - Tool clamping system: HSK-F63 - Material clamp system: Pneumatic - Drilling unit present: No - Tool changer positions [pcs.]: 22 - System/software: BiesseWorks - Safety feature: Safety mat - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: VTLF 250 - └ Year of manufacture: 2007 - └ Main motor power [kW]: 5.5 - └ Capacity [m³/h]: 250 - Tools included: No - CNC options: EPS system, Offcut conveyor, Manual control - CNC documentation available: USB stick, User keys/licenses - Table length [mm]: 6200 - Table width [mm]: 1320 - Working range X [mm]: 6200 - Working range Y [mm]: 1535 - Z-axis working range [mm]: 275 - X-axis maximum stroke [mm]: 6820 - Y-axis maximum stroke [mm]: 1963 - Transport dimensions: 11000mm x 2400mm x 2500mm (l x w x h) - Transport weight [kg]: 7200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Working area: X-axis: 2310 mm, Y-axis: 628 mm, Z-axis: 90 mm Max. programmable speed: X-axis: 100 m/min; Y-axis: 75 m/min; Z-axis: 15 m/min Drill holder: diameter 10 mm Spindle speed: 4000 rpm Grooving saw: diameter 120 mm Drill spindles: 4 horizontal spindles on the X-axis, 12 vertical spindles in the X-line Operating air pressure: 6 bar Lodpfx Asydf Ndol Iohh Maximum compressed air consumption: 0.75 NL/cycle Installed power: max. 7.5 kW Vacuum tool capacity: 40 m³/h CNC: Display: monochrome 9" Floppy disk drive PLC for machine cycle control Availability: short-term Stock location: Röllbach

Condition: used, Year of construction: 2013, power: 17.1 kW (23.25 HP), input voltage: 400 V, input current: 29 A, input frequency: 50 Hz, travel distance X-axis: 4,320 mm, travel distance Y-axis: 1,326 mm, travel distance Z-axis: 170 mm, number of axes: 5, number of slots in tool magazine: 33, Equipment: CE marking, Biesse Rover A 1343 CNC machining centre 5-Axis Description Rover A ATS CNC Machining Centers Working ranges X = 4,320 mm; Y = 1. 326 mm;Z = 170 mm Chip and scrap conveyor belt Automatic lubrication system Remote console Safety systems in compliance with the requirements of Directive 2006/42/EC Vacuum system for 1 vacuum pump of 250 m3/h or 300 m3/h 1 x 250 m3/h vacuum pump for standard system Auxiliary vacuum system for double working area machine Multi-zone 8 floors and 24 trolleys 8 ATS L = 1280 mm decks - 24 carriages - with automatic positioning (ATS-EPS X-Y) 8 reference stops with 115 mm rear stroke 8 front reference stops with 140 mm stroke positioned at a height of 1190 mm from the rear stops 4 side stops, with 140 mm stroke (2 right + 2 left) with implant 2 additional side stops, with 140 mm stroke (1 right + 1 left) Pneumatic system for double-stroke bar lifts 6 pneumatic double stroke load aid bar lifts for uniclamp vises H=74 for workpieces up to 98 mm thick Vacuum module size 132 x 146 x H74 mm Vacuum module size 132 x 75 x H74 mm with predisposition for pins Uniclamp vice with 2 movements with quick coupling and circular plate - H=74mm For clamping workpieces with a thickness from 40 to 98 mm 8 reference stops with 140 mm stroke positioned at a height of 670 mm from the rear stops Uniclamp vice with 2 movements with quick coupling and circular plate - H=74mmFor clamping workpieces with a thickness from 83 to 140 mm Flange for the preparation of a 5 Interpolating Axis Operating Unit for the assembly of Aggregates *The aggregates can only be used with the Electrospindle in a vertical position *Requires the 5 Interpolating Axis Operating Unit Predisposition for deflectors with inductive or pneumatic sensor on 5-axis operating unit Coolant control unit to replace the heat exchanger supplied with 13kW 5-axis units. Operating unit 5 interpolating axes 13 kW (17.4 Hp), HSK F63 connection, liquid-cooled. Includes the heat exchanger for cooling the coolant with operating temperatures between + 5° and +40° Right deflector with pneumatic sensor for 11 kW 5-axis electrospindle Upgrade from BiesseWorks Basic Machine to BiesseWorks Advanced Machine Iron fork for deflectors with inductive or pneumatic sensor Chain tool magazine with 33 places - centre distance 120 mm Lhodoy U Naiopfx Al Ieh Flexible front unit protection for loading unlimited Y-size (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, machine/vehicle number: 008496, X axis working area: 5920 mm Y axis working area: 1600 mm Working Table: Pod and Rail Main Electrospindle power: 16.5 KW Number of controlled axes: 5 axes Total number of drilling spindles: 23 Total number of tool changer positions: 34 Lhedpey H Dzfefx Al Ieh

Condition: good (used), Code: 0420 Brand: BIESSE Model: ROVER 13 - CE Standard CNC Working center with 3 controlled axis for furniture, custom-made furniture , panels, kitchens, wooden doors and various - CE Standard Working area X axis mm 1600 Working area Y axis mm 850 Stroke Z axis mm 70 X axis speed 75 mt/min Y axis speed 60 mt/min Z axis speed 15 mt/min Milling group Kw 2,2 18.000 rpm Vertical boring unit 8 spindles Horizontal boring bits X nr. 2 Horizontal boring bits Y nr. 2 Tool shank diameter 10 mm Spindle rotation speed 4000 rpm Blade group for milled diameter mm 120 Work table: 4 bar plans Vacuum pump 40 m3/h Total power Kw 10 Lodpfx Alozgtivs Ishh Numerical control NC 400: 6-inch alphanumeric and high-resolution colour graphic display Full-coverage safety cabin Compressed air 6 atm Machine overall dimensions mm 2450 x 1550 x 1900 h Overall dimensions with guard mm 3500 x 1900 x 2000 h Weight about kg 1550

Condition: as good as new (ex-display), Year of construction: 2026, CNC Machining Centers Rover Multi Up M C S Working Area*: X = 3280 mm; Y = from 1580 to 1660 mm, depending on work conditions Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 74 mm Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 29 mm Workpiece Clearance*: Y = 1900 mm Axis Travel*: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Subdivision of the vacuum system into 2 working zones and 2 clamping zones in X. AUXILIARY VACUUM SYSTEM – 2 zones Allows clamping of workpieces using vacuum templates. Remote Control RM850 Rover Multi Up M C S Panel – Multi Purpose Regular Configuration 2 Compatible with the turret tool magazine with 16 positions and the side tool magazine with 12 positions. The tool magazines can also be retrofitted. Uninterruptible Power Supply (UPS) for machine PC. 6 ATS workpiece supports – 18 module carriers — 6 aluminium workpiece supports. The positioning of the workpiece supports is via linear guides with ball bearing slider blocks. Clamping is performed on the front and rear linear guides via pneumatic cylinders. Clamping is released by a push button located at the front of the workpiece support. — 18 module carriers, 132 x 132 x H 41.5 mm, with independent pneumatic clamping. The vacuum modules can be rotated in 15° increments on the module carriers; an ideal solution for shaped parts. — 18 covers for module carriers without template. SA (Set-Up Assistant) working table for tables up to 1550 mm. Supported manual positioning system with motion direction indicator and position indicator. — Sensors on each working table and along the X-axis of the working area. — Display of direction and position achieved for the carriage during positioning phase, mounted on each working table. According to the programmed configuration of the working tables, the system indicates the direction of movement for each working table and carriage, and confirms with a green LED and audible signal when the correct position is reached, with a tolerance of +/- 1.5 mm. Subdivision of the pneumatic system into 2 working areas in X. Machining unit with 5 interpolating axes, 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled – 20,000 rpm Extraction hood with 12 NC-controlled positions for the 5-axis electrospindle. Flange for preparation of a 5-axis interpolating machining unit for mounting aggregates. Coolant system Additional Z-axis carrier for rear machining units, with independent Z-axis. Drilling head BH 24 L Side tool magazine with 12 positions, integrated into the machine bed. Turret tool magazine with 16 positions, installed directly on the X machining unit. HSK F63 tool adapter, equipped with a long integrated flange, for saw blades on the 5-axis head. Saw blade 300 mm, for tool holder. Hi-Tech tool set Complete set of tools for the acceptance test Consisting of the following 9 parts Replacement of standard PC with a high-performance PC. Ledpfx Alsy Ehrxs Ishh Digital device for measuring tool length up to 130 mm diameter. bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1. License WorkCenter suction cup proposal 5-Axis Simultaneous Material removal simulation 12-month warranty period Location: ex stock 54634 Bitburg - immediately available -

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, empty load weight: 7,200 kg, working width: 1,535 mm, spindle speed (max.): 20,000 rpm, working height: 275 mm, working length: 6,200 mm, Submitting a bid obliges you to collect the machine by June 22, 2026! TECHNICAL DETAILS Number of milling spindles: 2 Milling spindle 1 Number of controlled axes: 5 Spindle speed: 1,000 - 20,000 rpm Main motor power: 9 kW Milling spindle 2 Number of controlled axes: 3 Main motor power: 18.5 kW Tool changer positions: 22 Tool clamping system: HSK-F63 Working area X-axis: 6,200 mm Working area Y-axis: 1,535 mm Working area Z-axis: 275 mm X-axis maximum travel: 6,820 mm Y-axis maximum travel: 1,963 mm Table length: 6,200 mm Table width: 1,320 mm MACHINE DETAILS Software: BiesseWorks Dimensions & Weight Dimensions (L x W x H): 11,000 x 2,400 x 2,500 mm Unladen weight: 7,200 kg Transport packages: 1 piece EQUIPMENT Vacuum pump Becker VTLF 250 (main motor power 5.5 kW; capacity 250 m³/h) Safety mat Pneumatic material clamping system Beam table CNC documentation: USB stick, user key/licenses Ljdpfx Aloy Tu Upe Iehh

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, For sale: Biesse Rover 3.03 CNC machining center The machine is currently in operation and can be inspected and tested while powered on, by prior arrangement. The Biesse Rover series is known for its robust construction, high reliability, and versatile applications in wood and panel processing. It is ideally suited for carpentry shops, interior fitters, furniture manufacturers, and industrial production companies. Technical data: Control system: CNC XP 600 Travel range, X-axis: 3,060 mm Travel range, Y-axis: 1,260 mm Travel range, Z-axis: 150 mm Machine length: 4,400 mm Ledpfx Aoza Edtjl Ishh Machine width: 2,800 mm Machine height: 2,400 mm Weight: approx. 3,130 kg

Condition: ready for operation (used), Year of construction: 2006, travel distance Z-axis: 200 mm, number of axes: 3, spindle motor power: 9,000 W, spindle speed (max.): 24,000 rpm, This 3-axis BIESSE ROVER 20 CNC Wood Machining Centre was manufactured in 2006. It features a working area of approximately 3060 × 1260 mm and a powerful 7–9 kW HSD electrospindle with speeds up to 24,000 RPM. The machine is equipped with an 8-position rear tool changer and offers various table types for versatility. If you are looking to get high-quality wood machining capabilities, consider the BIESSE ROVER 20 machine we have for sale. Contact us for further details. Lhsdpfoy Tycxjx Al Ish • Working area: approx. 3060 × 1260 mm (10’ × 4’); Z travel around 150–200 mm • Main spindle: 7–9 kW HSD electrospindle; up to 18,000–24,000 RPM; ISO30 or HSK tool holder (depends on package) • Tool changer: typically 8-position rear; some units with 10 or 12 positions • Drilling head: BH17/BH21 style with vertical and horizontal drill spindles; grooving saw unit (optional) • Table type: pod & rail table or flat vacuum table; ATS vacuum system • Controller: NC1000 / XP600 control; running BiesseWorks / Biesse Rover control software • Electrical: 400V 3-phase; 50/60 Hz; around 15–25 kW connected load

Condition: used, machine/vehicle number: 008650, X axis working area: 3280 mm Y axis working area: 1320 mm Working Table: Pod and Rail Main Electrospindle power: 13 KW Lhedpfx Aozdqttol Ieh Number of controlled axes: 5 axes Maximum edge height: 65 mm Total number of drilling spindles: 24 Total number of tool changer positions: 16

Condition: ready for operation (used), Year of construction: 2006, table width: 1,520 mm, table length: 6,200 mm, travel distance X-axis: 6,821 mm, travel distance Y-axis: 1,963 mm, travel distance Z-axis: 663 mm, controller manufacturer: BIESSE, controller model: XP600 PC-based control with Windows XP WRT, spindle motor power: 9,000 W, spindle speed (max.): 22,000 rpm, number of slots in tool magazine: 22, number of axes: 5, This 5-axis BIESSE Rover C 9.65 was manufactured in 2006. It features a working area of 6200 mm in X and up to 1935 mm in Y, with a Z-axis travel of 663 mm. The machine is equipped with a powerful 8 kW spindle and a tool changer with 22 positions. If you are looking to get high-quality CNC routing capabilities, consider the BIESSE Rover C 9.65 machine we have for sale. Contact us for further details. • Drive system X-axis: rack and pinion • Drive system Y-axis: ball screw • Drive system Z-axis: ball screw • Guide system: linear guides with recirculating ball bearing blocks • Motors: brushless motors with digital drives • Programming formats: DXF and CID3 • Main spindle type: 5 interpolating axes machining unit • Spindle power S1: 8 kW at 12000 rpm • Spindle power S6: 9 kW at 12000 rpm • Maximum spindle speed: 22000 rpm • Tool interface: HSK F63 • C-axis rotation: 360° continuous • C-axis speed: 13.5 rpm • B-axis rotation: ±100° (positioning) / ±98° (interpolation) • B-axis speed: 13.5 rpm Lhedpfx Aley Sgmue Ijh • Z-axis feed speed: 30 m/min • Vacuum system: multi-zone vacuum with connections on both sides • Vacuum pump capacity: 250 m³/h (50 Hz) / 300 m³/h (60 Hz) • Worktable: ATS system with modular supports • Number of workpiece supports: 10 • Number of module carriers: 40 • Module size: 132 x 132 x H41.5 mm • Vacuum module size: 132 x 146 x H74 mm / 132 x 54 x H74 mm • Total module height: 115.5 mm • Clamping system: vacuum and pneumatic (Uniclamp optional) • Clamping force Uniclamp: 220 kg at 7 bar • Minimum workpiece length (Uniclamp): 140 mm • Drilling unit: BH 42 L • Vertical drilling spindles: 29 • Horizontal drilling spindles: 6 (double output) • Grooving saw diameter: 120 mm • Drilling spindle speed: up to 6000 rpm • Tool changer: chain type • Tool changer capacity: 22 positions • Tool spacing: 180 mm • Max tool diameter (full load): 175 mm • Max tool diameter (single): 250 mm • Max tool length: 268 mm • Max tool weight: 7.5 kg • Total tool weight: 100 kg • Pick-up tool changer: 1 position • Max tool weight pick-up: 8 kg • Electrical supply: 380/400/415 V 50/60 Hz • Inverter for spindle: up to 14 kW • Cooling system: liquid cooling unit for electrospindles (1600 W) • Lubrication system: automatic centralized lubrication • Safety system: CE compliant with safety mats, guards and emergency stops • Chip removal: integrated chip conveyorIn 2023, the machine received a new 5-axis spindle head HS552 A HD 0S2 + ES360 F63 9 kW

Condition: used, functionality: fully functional, CNC machining center designed for drilling, milling, and grooving parts made of wood-based materials. The machine is equipped with a console-type worktable, a drilling head, a grooving unit, and an automatic tool changer. Suitable for both custom and series production of furniture and interior components. The machine has been serviced by our technician, so we are well aware of its condition and history. Lhedpozcrhwofx Al Ieh The machine can be tested upon agreement at our showroom in Brno or at the customer's location before shipment to us.

Condition: used, Year of construction: 2002, For sale: Junget / Biesse Rover 24 L CNC milling machine / machining center. The machine is designed for professional processing of furniture panels, wooden components, plastics, and production components. It is suitable for carpentry workshops, companies producing furniture, kitchen elements, fronts, structural panels, PEHD components, and other parts requiring precise milling and drilling. Lodpfezf E E Hex Al Ishh The Biesse Rover 24 L is a robust CNC machining center equipped with a vacuum table, automatic tool changer, and a set of drilling spindles. The machine enables quick and repeatable performance of milling, vertical and horizontal drilling, and grooving operations. Technical specifications: Model: Junget / Biesse Rover 24 L Type: CNC milling machine / CNC machining center Machine dimensions: approx. 5.8 × 2.45 × 2.5 m Work table: vacuum X-axis travel: 4500 mm Y-axis travel: 1300 mm Z-axis travel: 180 mm Vacuum pump: 120 m³/h Control system: NC1000 Operating system: Windows XP Automatic tool changer: yes Vertical drilling spindles: 7 pcs Horizontal drilling spindles: 8 pcs Circular saw: for making grooves / slots, e.g., in fronts or furniture components Safety features: safety grid / safety mat Tools installed in the machine: included Applications: The machine is particularly well-suited for the production of furniture, kitchen cabinets, fronts, carcasses, base panels, and components requiring serial drilling and milling. The drill array allows for the simultaneous execution of several holes, which speeds up production and ensures dimensional repeatability. The machine was mainly used for processing PEHD1000 plastic, which confirms its versatility and the ability to work not only with wood-based materials but also with engineering plastics. Technical condition: The machine has been used. According to information from the previous owner, the device is functional, starts up, and has no known defects or reservations. The equipment is sold as used and is subject to verification by the buyer upon collection. Key advantages: * robust industrial construction, * large working area, * vacuum table, * automatic tool changer, * vertical and horizontal drilling spindles, * circular saw for grooves and slots, * ability to process panels, wood, and plastics, * good machine for the production of furniture and serial components. The machine is suitable for continued operation in a production plant, carpentry workshop, or company engaged in CNC machining.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Working area X: 6,400 mm Working area Y: 1,500 mm Number of milling spindles: 1 Main motor: 13 kW Maximum rotation speed: 24,000 rpm Tool clamping system: HSK-F63 Tool change positions: 8 Vertical drilling heads: 20 Horizontal drilling units X: 4 Horizontal drilling units Y: 4 Lhjdpfx Ajwlcqvsl Ijh 2 vacuum pumps, each 360 m³/h Nesting Remote control Software: BIESSE WORKS Overall dimensions: 11,004 × 5,334 mm Weight: 4,900 kg