DRILLING LINE with HANDLING

BIESSE + RBO Techno FDT (2) + Winner (2)

Condition: good (used), Year of construction: 1994, 2-sided planing machine, top and bottom Constant table (always the same feed height) Ijdpfjhuthyox Akpjig Max. planing width: 600 mm Max. planing height: 280 mm Planer shafts with strip knives Ready for immediate use.

Condition: new, including 1x220V 1x3P 32A 1x5P 63A sockets Continuous power: 40 kW / 50 KVA Iijdjh Rmvrjpfx Akpog Engine: Fawde 4DX-65D, 4 cylinder, water-cooled Connection: sockets or circuit breakers Frequency: 50Hz Voltage: 400/230 V including electronic speed control, AVR, battery charger Comap AMF8 control with generator network grid feed in fl protection

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Out-side rollers way (on gound) to in-feed pile of panels to the Loader Out-side motorized rollers table (which receives panels from the Loader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Isdpsfi Tg Hjfx Akpoig Total installed motor power Kw 30

Condition: as good as new (ex-display), FULL LINE of Double-side Sizing-Milling & Edge Banding. Composed of the following machines: VZ0200A) Gantry-portal Loader (Double pick-up station) "BARGSTEDT" Mod. TBH 500/D/30/12 VZ0200B) 1st Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 525/8/A3/15 VZ0200C) In-feeding Rollerway "HOMAG" Mod. TDL 310/30/12 with 90° Turning device (from Iedpsdt Rgvjfx Akpoig lenghtwise to crosswise) with double cone system VZ0200D) 2nd Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 526/10/A3/30 VZ0200E) In-feeding Rollerway "HOMAG" Mod. TDL 510/25/12 with 90° Turning device (from crosswise to lenghtwise) with double cone system VZ0200F) Cleaning machine "WANDRES" VZ0200G) Gantry-portal Stacker (Double pick-up station) "BARGSTEDT" Mod. TSP 410/D/25/12

Condition: new, Year of construction: 2025, Gannomat Concept 70 Eco Laminate – Body press with rapid traverse Technical data: Laminate body press from our showroom; Working area: width from 150 – 2,500 mm, height from 150 – 1,400 mm; depth 700 mm; - Laminate press beam at the top with 6 elements, laminate press beams on the side with 5 elements - Laminate press beams with proven tolerance compensation for tight body joints - Counterpressure surfaces are 40 mm thick, coated, continuous support plates - The pressing force of the press beams is continuously adjusted electronically via 2 potentiometers and set via a frequency converter, therefore, the torque transmission is absolutely wear-free. - Pressing force for horizontal press beams min. 500 daN (kg) to continuously max. 2200 daN (kg) Iiodpfeiidm Nox Akpsg - Pressing force for vertical press beams min. 300 daN (kg) to continuously max. 2200 daN (kg) - Including option: Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams, pressing speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Tapping mode for precise positioning of the two press beams, e.g. for low pressing forces, drawers and bodies at 45 degrees. Simple operation via 6 separate push buttons, freely adjustable preselection of pressing time with automatic opening, loading height 300 mm The machine is in our showroom and can be delivered immediately. Location: in stock at 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2016, Angular panel saw with automatic pre-loading and twin pusher system for optimised cutting Osi Plus Numerical Control Os Labelling labelling machine with on-board graphic labelling with part drawings Label printing management software Optiplanning Cutting Optimizer Cutting length mm 4500 Cutting width mm 2200 Blade projection 95 mm Motorized rollers for lateral loading on lifting table 4500 x 2200 mm. The translation speed is 10.8 m\min (50hz) - 13.1 m\min (60hz) Automatic recognition of the lost panel (martyr panel) based on the thickness specified in the machine data Low battery stop Automatic side loading buffer. Includes: perimeter nets, double photocell, push-button panel, predisposition electric for the two motorized pre-rollers and the amplification of 4 rollers in place of the fork passages in the pre- intermediate roller conveyor Pre-loading side roller conveyor dim 3800 x 2200 mm with motorized rollers (height from the ground 325 mm) Inertial conveyor for conveying longitudinal trimmings for angular systems 4500 mm (total length 7295 mm) 3000 mm extension to the inertial conveyor to also convey transverse trimmings Long chute for manual conveying of cross-cut trimmings to the centralized inertial conveyor 2050 x 850 mm air curtain discharge table with wheels at the front Air generator up to 6 floors with air curtain MULTIPUSHER 2.4 system with automatic lubrication Additional mobile lateral aligner on the transverse plane. The presence of this device allows to reduce from 1830 to 1220 mm is the minimum length of the panels that must be sent for cross-sectioning. Automatic blade shaft bending detection device for angular systems (longitudinal and transversal) consisting of a sensor that detects the deflection directly on the blade shaft and a device that detects the revolutions blade directly on the spindle. Remote cycle start button panel Automatic panel loading via rear lifting table Automatic double aligner with pneumatic cylinders Additional movable lateral aligner on the transverse plane Main blade, max diameter mm, KW 15 Scoring blade, max diameter mm, KW 2.2 Blade carriage speed 1-140 m/min. – BRUSHLESS motors Longitudinal pusher carriage speed 90 m/min. Cross pusher carriage speed 135 m/min. Ijdsuc Idxjpfx Akpoig Double pusher carriage with 6 grippers on the longitudinal carriage + 10 grippers on the transverse carriage (8 fixed grippers + 2 on the multi-push system) Cutting system for thin panels

Condition: new, Year of construction: 2025, functionality: fully functional, Specialised press built from the ground up for briquetting of iron, steel and similar alloys. Includes integrated oil collection pads. Does not include packing table – only briquette guides (slides). Comes with see through bunker doors & oil heating elements as standard. Machines are controlled by Siemens KTP-400 touchscreens. 2nd generation available for purchase from February 2024. For this press please first contact us! Technical Data : Throughput: Up to 600 briq/h* Main motor: 30kW Infeed motors: 2.6kW Cooling system: 1.6kW Total power: 34.2kW Oil tank: 260l Filters: 4 Length: 2000mm Width: 2000mm Iijdpjtmugcjfx Akpjg Height: 2200mm Weight: 3500kg Briquette size: 40-110, D80mm Warranty: 2 years / 2 000 workhours

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, cooling capacity: 680 kW (924.54 HP), Equipment: cooling unit, condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture:2004 Nominal power 680.4 /579.2 kw Refrigerant:R404 Refrigerant content:218.9+25 liters Flow rate: Temperature range: -50°C- +100°C Max pressure: Operating pressure: 28bar/-1bar (performance depends on usage parameters) Number of fans: 5 pcs, diameter 900 mm, Air flow:162500 /131000 m3/h Motor power consumption:17.60/11.50 Kw Heat exchanger aream2 Iiodpfx Asvllxdekpjg Operating noise 52 dB Length: mm Height: mm Width: mm Weight: ca kg The radiator has been technically inspected, fully functional

Condition: used, Year of construction: 2017, Overview The winder was manufactured in 2017 by the Spanish manufacturer movitec. It is in operation until the end of September 2023 and can be visited at any time.  Technical data  Max. 120 pallets/ h (with 10 wraps) Dimensions (LxWxH): 5240mm x 3825mm x 4184mm Weight: 2.000kg  Foil width: 500mm  Main frame made of steel  Rotating ring with unwinding device for prestretch film Motorized prestretch system Cutting and welding system Scope of delivery  Protective fence  Winder | Movitec | Saturn S6 | 2017 Compressor | Josval | EDS-900 | 2016 Iiedpfx Asl Uyfkjkpeg

Condition: excellent (used), Gantry (Portal) machine Movable panel (workpiece), movable working head (Horizontal position of the panel/workpiece) Numerical Control Power Control, Software WoodWOP Safety cabin (enclosure) of the working head and integral safety cabin (enclosure) of the machine In-feeding working table (panel support). Out-feeding working table (panel support) Panels (workpieces) feeding by No. 3 motorized belts - Feeding speed (m/min) max 130 ca. Minimum workpieces dimensions (X - Y - Z) mm 250 x 100 x 15 Maximum workpieces dimensions (X - Y - Z) mm 2500 x 1050 x 60 Motorized carpet to evacuate chips and wastes. Separate electric and command cabinet Total installed power: Kw 99 N° 2 WORKING GROUPS (TOP) - (SERVO-MOTOR X-Y-Z ): N° 4 Drilling heads (4 x Kw 2.3) with No. 10 vertical spindles each (total top spindles No. 40) N° 3 WORKING GROUPS (BOTTOM) - (SERVO-MOTOR X-Y-Z ) : N° 6 Drilling heads (6 x Kw 2.3) with No. 40 vertical spindles each (total bottom spindles No 240) N° 2 WORKING GROUPS (HORIZONTAL) N° 2 Drilling heads with horizontal spindles Iiedpfx Asgwbbqskpsg N° 21 Horizontal drilling spindles (Right Side) + N° 21 Horizontal drilling spindles (Left Side) N° 8 Dowel Inserting nozzle & glue injectors(Right side) + N° 8 Dowel Inserting nozzle (Left Side) N° 2 Storage tanks for automatic feeding of the dowels OPTIONAL: WIRELESS BAR CODE SCANNER