Throughfeed machining center

Weeke BHX 500

Condition: used, Year of construction: 2011, CNC – Throughfeed Machining Center Manufacturer: Weeke Type: Optimat BHX 500 Year of manufacture: 2011 Technical data Working area X: 2500 mm Working area Y: 1300 mm Max. workpiece thickness Z: 80 mm Number of milling spindles: 2 Milling spindle power: 6 kW each Milling spindle speed: up to 18,000 rpm Tool holder: ETP 25 Total number of drilling spindles: 84 Kedpfxozzzfbj Aklonb Vertical drills, top: 32 Horizontal drills, top X: 8 Horizontal drills, top Y: 2 Vertical drills, bottom: 32 Horizontal drills, bottom X: 8 Horizontal drills, bottom Y: 2 Dado cutter unit: 2 Dado cutters: adjustable 0 / 90 degrees, top and bottom Dado cutter speed: 7,500 rpm Control system: PowerControl Software: woodWOP Number of axes: 3 Total connection: approx. 20 kW Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2021, operating hours: 140 h, functionality: fully functional, feed length X-axis: 3,050 mm, feed length Y-axis: 1,250 mm, feed length Z-axis: 80 mm, input frequency: 50 Hz, input current: 29 A, working width: 3,050 mm, We offer this very good HOMAG DRILLTEQ V-500 throughfeed drilling machine, year of construction 2021. Working dimension X 3.050 mm Working dimension Y 1.250 mm Working dimension Z 80 mm Number of milling spindles 1 Main motor power 10 kW Rotation speed max 24.000 rpm Tool clamping system HSK-F63 Tool changer positions 4 Vertical drilling spindles 15 Horizontal drilling spindles in X 6 Horizontal drilling spindles in Y 4 Groove saw 90° turnable Vertical working surface Machine table Feed-through technology Special workpiece clamping system clamp gripper Barcode reader Safety device enclosed cabin Control Homag powerTouch, HOMAG POWER CONTROL Software HOMAG WOODWOP 7.2 Conformity marking Knsdpfjylp Sljx Akljb CE mark Category: Machining centre Type designation: DRILLTEQ V-500 Subtype: OPTIMAT BHX200 Machine number: 0-250-73-7195 Wiring diagram: 0-250-73-7195 Supply voltage: 400Y/230 V Neutral conductor: yes Phases: 3 Frequency: 50 Hz Maximum operating full load current: 29 A Fuse rating: 35 A Control voltage: 24 V If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, machine/vehicle number: 005910, X axis working area: 2500 mm Knsdpfx Aswuckhekljb Y axis working area: 1300 mm Main Electrospindle power: 6 KW Number of controlled axes: 3 axes Total number of drilling spindles: 84

Condition: used, Year of construction: 2012, Automatic CNC machining center for efficient and precise drilling and milling of panel furniture components wooden PC 85 numerical control - woodWOP 6 software Safety cabin for the working head N. 2 clamps for blocking and moving the piece during machining Loading bench by air curtain table Minimum dimensions of the piece (X - Y - Z) mm 250 x 100 x 8 (2 x 4 mm) Maximum dimensions of the piece (X - Y - Z) mm 3000 x 1000 (optional mm 1300) x 80 (2 x 40 mm) Possibility of processing two panels simultaneously N. 2 working heads (one lower and one upper) composed as follows: * Upper vertical work head N. 1 ETP-6 vertical electrospindle (power Kw 6) N. 1 Grooving saw (90° on the X-Y axis) dia. 125mm N. 32 vertical drilling spindles (power Kw 2,7) N. 10 Horizontal drilling spindles (8 in X + 2 in Y) * Bottom vertical working head N. 1 ETP-6 vertical electrospindle (power Kw 6) N. 1 Grooving saw (90° on the X-Y axis) dia. 125mm N. 32 vertical drilling spindles (power Kw 2,7) N. 10 Horizontal drilling spindles (8 in X + 2 in Y) Evacuation of the panel (panels) by motorized belt roller conveyor Security system with perimeter grilles and frontal safety mats Kedpfx Akjvz A E Tjljnb

Condition: used, Year of construction: 2018, operating hours: 10,347 h, total height: 2,400 mm, total length: 7,000 mm, total width: 2,400 mm, Colour: Grey Empty weight: 3.450 kg - Year: 2018 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Operating hours: 10347 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - - Min. spindle speed [rpm]: 600 - - Max. spindle speed [rpm]: 24000 - - Main motor power [kW]: 8.5 - - C-axis present: Yes - Type milling table: Beam table - Tool holder: HSK-F63 - Material clamp system: Pneumatic - Drilling unit present: Yes - └ Motor power [kW]: 2.64 - └ Horizontal drill spindles [pcs.]: 10 - └ Vertical drilling spindles [pcs.]: 24 - Saw unit present: Yes - Tool changer positions [pcs.]: 25 - System/software: Xilog plus - Safety feature: Bumper guard - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: Picchio - └ Year of manufacture: 2018 - └ Main motor power [kW]: 2.5 - └ Capacity [m³/h]: 108 - └ Connection diameter [mm]: 80 - └ Oil free: Yes - CNC options: Laser for vacuum pod positioning, Offcut conveyor, Barcode reader Knedpsxtbgpjfx Aklsb - Working range X [mm]: 3110 - Working range Y [mm]: 1320 - Z-axis working range [mm]: 180 - Voltage [V]: 400 - Current consumption [A]: 47.2 - Fuse [A]: 63 - Power [kW]: 10.0 - Transport dimensions: 7000mm x 2400mm x 2400mm (l x w x h) - Transport weight [kg]: 3450kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2008, Machining center Manufacturer: Weeke Type: BHX 500 Year of manufacture: 2008 Knedpfx Aeh E Sghekljb Machining dimension X: 2,500 mm Machining dimension Y: 1,300 mm Machining dimension Z: 4 - 80 mm Number of routing heads: 2 Number of drilling heads: 2 Vertical drilling spindles: 72 Horizontal drilling spindles X: 16 Horizontal drilling spindles Y: 4 Notch saw: can be swiveled 90° Speed, X-axis: 130 m/min Speed, Y-axis: 80 m/min Speed, Z1-axis: 50 m/min Speed, Z2-axis: 27 m/min Rotational speed: 18,000 rpm Dismantled – available immediately

Condition: excellent (used), FLEXIBLE C.N.C. WORKING CENTER 3 axes (X-Y-Z) Movable panel (workpiece), static working head - Horizontal position of the panel (workpiece) Safety cabin (enclosure) of the working head Numerical Control PowerControl PC86 power Touch (Software woodWOP) Separate electric and command cabinet No. 2 Workpieces fixing clamps (for the panels introduction in the working area) WEEKE Prepositioning Unit - to position workpieces in machine with clamp grippers faster. Kjdpfxsyyvtte Aklenb In-feeding working table (panel support) and Out-feeding table (with motorized belts) Minimum workpieces dimensions (X - Y - Z) mm 200 x 70 x 8 (2 x 4 mm) Maximum workpiece dimensions (X -Y- Z) mm 3000 x 1000 (option mm 1300) x 80 (2 x 40 mm) Two panels simultaneously processables (in Z axe) Separate electric and command cabinet WORKING GROUPS (TOP): 2V42, 2H8X/2Y, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle ETP-6 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 42 Vertical drilling spindles (power Kw 2.3) No. 10 Horizontal drilling spindles (8 in X + 2 in Y) WORKING GROUPS (BOTTOM) 2V42, 2H8X/2Y, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle ETP-6 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 42 Vertical drilling spindles (power Kw 2.3) No. 10 Horizontal drilling spindles (8 in X + 2 in Y)

Condition: used, Year of construction: 2018, Startech cn MAIN FEATURES FLEXIBLE AND CUSTOMIZED PRODUCTION COMBINED WITH SPEED AND PRECISION DRILLING FROM ABOVE WITH REFERENCE TO THE TOP OF THE PLATE ALLOWS ABSOLUTELY PRECISION MACHINING NUMERICAL CONTROL WITH 7" COLOR SCREEN: SIMPLE AND INTUITIVE TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting work area mm 0 x 800/0 x 800 X-axis stroke mm 750 Max. travel speed of the X-Y axes m / min 25 DRILLING UNIT Vertical spindles number 7 (4X-4Y one of them common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed groove saw (direction) X Diameter of the groove saw mm 100 Max. thickness of the groove saw mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Speed of the groove saw rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air demand bar 6 Compressed air consumption Nl/cycle 90 Extraction demand m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 120 GENERAL CHARACTERISTICS Universal CNC drilling machine with work table with fixed gantry and movable workpiece for performing the following machining operations: - Vertical drilling on the panel surface - Horizontal drilling on all four sides of the workpiece - Groove Milling with integrated groove saw in the "X" direction. Self-supporting structure. Machine frame made of tubular steel to provide a large base for the work table. The structure is positioned on three self-leveling feet. The electrical control cabinet is integrated into the machine frame. "Easy Motion" central Bakelite support table: - an MDF sector for through-hole drilling, automatically pivoting for horizontal drilling - an infeed roller that facilitates panel loading - a rear roller conveyor that facilitates panel sliding - left and right stops - a central aligner with manual adjustment. The left and right stops are required to drill the two opposite sides of the panel horizontally in the "X" direction. Panel positioning along the X axis is achieved by means of suction cups. Unit support. This is a gantry structure made of tubular steel. The main machining unit is installed on the gantry. F10L drilling unit includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with a single drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit Positioning of the workpiece and drive of the machining unit A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the machining unit during machining. The movement in X and Y axis is carried out on THK guides with transmission on reinforced toothed Movement in Z axis is carried out pneumatically on "ball-bushing" guides with positioning on stop adjustable via the positioning of the working units is carried out via technology and drives with -CONTROL The control was specially developed for use Kjdpfxjvwbp As Aklonb

Condition: excellent (used), FLEXIBLE C.N.C. WORKING CENTER 3 axes (X-Y-Z) Movable panel (workpiece), static working head - Horizontal position of the panel (workpiece) Numerical Control PC 85 (Software woodWOP) Kjdpfx Aoziapbeklsnb Safety cabin (enclosure) of the working head Separate electric and command cabinet - Total installed power (Kw) 20 (ca.) No. 2 Workpieces fixing clamps (for the panels introduction in the working area) In-feeding working table (panel support) Out-feeding table (with motorized belts) Minimum workpieces dimensions (X - Y - Z) mm 200 x 100 x 8 (2 x 4 mm) Maximum workpiece dimensions (X -Y- Z) mm 3000 x 1000 (option mm 1300) x 80 (2 x 40 mm) Two panels simultaneously processables (in Z axe) WORKING GROUPS (TOP): 2V32, 2H8X/Y2, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle ETP-25 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 32 Vertical drilling spindles (power Kw 2.7) No. 10 Horizontal drilling spindles (8 in X + 2 in Y) WORKING GROUPS (BOTTOM) No. 1 Vertical electro-spindle ETP-25 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 32 Vertical drilling spindles (power Kw 2.7) No. 10 Horizontal drilling spindles (8 in X + 2 in Y)

Condition: excellent (used), Year of construction: 2009, Weeke BHX 500 – Operator Side Right Weeke Machining Center, each with one machining support above and below Infeed table with automatic workpiece feeding and positioning WORKPIECE DIMENSIONS Min. workpiece length: 200 mm Max. workpiece length: 2,500 mm Min. workpiece width: 70 mm Max. workpiece width: 1,000 mm Min. workpiece thickness: 8 mm (2*4 mm) Max. workpiece thickness: 80 mm Max. workpiece stacking: 2 pieces Machine configuration: 2V21 HIGH SPEED 7500 Vertical drilling unit arranged in both upper and lower machining supports, each with 21 drilling spindles (individually controllable with variable speed range). 2H4X/1Y Horizontal drilling unit arranged in both upper and lower machining supports, each with 10 spindles individually selectable via program. Each with 8 drilling spindles: in X-direction Each with 2 drilling spindles: in Y-direction N2 X-Y 90° Grooving saw unit arranged in both upper and lower machining supports for machining operations in the X-Y direction, swiveling 90°. Cutting depth: 30 mm ADDITIONAL NOTE ON GROOVING SAW BLADE The saw blade width can be 8.4 mm. The cutting cross-section must not exceed 70 mm². F2-ETP-6 KW Milling unit arranged in both upper and lower machining supports, suitable for receiving shank tools. Manual tool change. Tool clamping: manual, Hydro quick-clamping system ETP 25 Rotation direction: right/left Speed: 6,000 – 18,000 rpm, stepless programmable Machining up to 3,000 mm Infeed table with automatic workpiece feeding and positioning Workpiece discharge area with cross belt conveyor and lifting arms Knedex S Hzlspfx Akleb – Workpiece length measurement in the machine – Movable operator terminal – Barcode software incl. scanner

Condition: used, Year of construction: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of the units and accessories (base) The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier in gantry design is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The work unit is mounted on this mobile unit carrier on prismatic, ground guides and a recirculating ball slide. Axis movement: The drive system in the Y and Z axes is provided by ground, high-precision recirculating ball screws. The X-axis is driven by a backlash-free, preloaded precision rack and pinion drive. This ensures balanced load distribution during the positioning process. This characteristic is important for ensuring balanced movement even in more complex tasks. The various axes are driven by brushless three-phase servo motors/brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These properties make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection) 0.9 bar Control / control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRIC/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC gives the NC control an unparalleled level of familiarity: the software runs on Windows XP and allows quick and easy programming, which is easy to learn even for inexperienced users. The system is open and allows the connection of CD-ROM drives, audio cards, barcode readers, modems, printers, scanning systems, etc. Furthermore, the installation of all network systems, as well as all commercially available CAD programs, is possible. To reduce space, the control cabinet is located under the machine table, and the operator works at a separate terminal on casters, which can be freely positioned. XILOG PROGRAMMING SYSTEM Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for languages I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to perform the same panel machining on different Kodpfx Asvvi Rfskljnb

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, TECHNICAL DETAILS Workpiece length: min. 250 – max. 2500 mm Workpiece width: min. 70 – max. 1000 mm Knjdpfsyg E R Hsx Akljb Workpiece thickness: min. 4 mm – max. 80 mm Workpiece stacking: max. 2 pieces Vertical Drilling Unit 2V21 HIGH SPEED 7500 Feed stroke (Z-axis): 60 mm Drilling depth: max. 38 mm Direction of rotation: clockwise/counterclockwise Speed: 1,500 – 7,500 rpm, frequency-controlled Drive: 2 x 2.7 kW Drill chuck: d = 10 mm Total length of drill bit: 70 mm Maximum drill bit diameter: 35 mm Spindle distance: 32 mm Spindle type: individually controllable Horizontal Drilling Unit 2H4X/1Y 4 drilling spindles each in X-direction 1 drilling spindle each in Y-direction Drilling depth: max. 38 mm Drilling height (Z-axis): 38 mm from top edge of workpiece Direction of rotation: clockwise/counterclockwise Speed: 1,500 – 7,500 rpm, frequency-controlled Drill chuck: d = 10 mm Total length of drill bit: 70 mm Maximum drill bit diameter: 20 mm Spindle type: individually controllable Grooving Saw Unit N2 X-Y 90° Cutting depth: 30 mm Machining cross-section: max. 70 mm² Speed: 1,500 – 7,500 rpm, frequency-controlled Tool diameter: 125 mm Saw blade thickness: max. 5 mm Milling Unit F2-ETP-6 KW Tool holder: for shaft diameter d = 25 mm Maximum tool diameter: 60 mm Tool clamping length: min. 65 mm / max. 95 mm Maximum tool weight: 2.5 kg Tool change: manual, ETP 25 hydro quick-clamping system Direction of rotation: clockwise/counterclockwise Speed: 6,000 – 18,000 rpm, steplessly programmable Drive: frequency-controlled three-phase motor Max. output at tool: up to 5/6 kW in continuous / intermittent operation (S1/S6-50%) EQUIPMENT Material infeed "IgeL-ROBOT" Lower machining support Upper machining support Vertical drilling unit 2V21 HIGH SPEED 7500 Horizontal drilling unit 2H4X/2Y Grooving saw unit N2 X-Y 90° Milling unit F2-ETP-6 KW Barcode reader Manufacturer: Datalogic

Condition: ready for operation (used), Year of construction: 2010, machine/vehicle number: 0-250-12-2554, functionality: fully functional, workpiece length (max.): 1,000 mm, workpiece width (max.): 3,000 mm, workpiece height (max.): 80 mm, controller model: PC 85, TECHNICAL DETAILS Knsdpfx Aeydnu Nskleb Workpiece width min.: 250 mm Workpiece width max.: 3,000 mm Workpiece length min.: 100 mm Workpiece length max.: 1,000 mm Workpiece height min.: 8 mm Workpiece height max.: 80 mm Upper vertical working unit ETP-6 vertical spindle power: 6 kW Grooving cutter diameter: 125 mm Vertical drilling spindles: 32 (power 2.7 kW) Horizontal drilling spindles: 10 (8 in X + 2 in Y) Lower vertical working unit ETP-6 vertical spindle power: 6 kW Grooving cutter diameter: 125 mm Vertical drilling spindles: 32 (power 2.7 kW) Horizontal drilling spindles: 10 (8 in X + 2 in Y) MACHINE DETAILS Control: PC 85 Software: woodWOP 6 EQUIPMENT Safety enclosure for tool set 2 clamping chucks for securing and moving the workpiece during machining Loading bench with air cushion table Powered roller conveyor for panel discharge Capability for simultaneous processing of two panels

Condition: good (used), Year of construction: 2005, operating hours: 32,870 h, functionality: fully functional, machine/vehicle number: 6030578, turning diameter: 32 mm, spindle speed (max.): 8,000 rpm, bar diameter (max.): 32 mm, We offer for sale Traub TNL26K automatic cnc lathe. Machine is connected to power and can be inpected every time by prior appointment. Year of built: 2005 Spindle passage 32mm Main spindle: 6.7/10.7kW; 8000rpm Counter spindle: 6.7/10.7kW; 8000rpm Upper turret: 12pos. 12x12/16x16, driven tools 2/5.5kW, 0-6000 rpm, 6.4/21 Nm Ksdpfovldx Aex Aklonb Lower turret: 12pos. 12x12/16x16, driven tools 2/5.5kW, 0-6000 rpm, 6.4/21 Nm Connected load: 24kW Barfeeder: FMB Turbo 5-42/4200mm Swarf conweyor: Knoll 240 S1/100 Coolant Kompaktbandfilter: Resy Machine is sold with a lot of toolholders not driven and driven - list on attached photo.