Used Hakomatic B 655 S for sale (83,501)

Year of construction: 1997, condition: used, functionality: limited functionality, machine/vehicle number: 9.037, The flat pouch packaging machine is suitable for packaging granular and powdered materials, spices, and cream powders into paper-based or composite film packaging. It requires a continuous supply of the material to be packaged and an intermittent supply of the packaging material. All packaging operations are performed in automatic mode. In 2006, the packaging machine underwent a complete overhaul and was equipped with an automatic twin-scale dispenser as an additional machine unit. As a result, the machine is suitable for dispensing not only powdered materials but also granular materials (e.g., coffee, pasta, soup granules, etc.). The equipment was removed from production; there were no problems with it, but it has not been in operation for a long time and may therefore require refurbishment. Rcjdpfjz Ryhxjx Akioh Stored in a covered, enclosed warehouse.

Condition: used, operating hours: 172 h, overall weight: 1,500 kg, fuel type: electric, HAKO Automatic Cleaner and Scrubber-Dryer Name: HAKOMATIC B 1050 Drive: ELECTRIC Condition: see photos / TOP condition Item No.: B 1050 Manufacturer: HAKO Year of manufacture: see photos - visually TOP Operating hour meter reads "172" 4 brushes Electric-operated Battery, full power 36 V DC / 5.5 KW Weight: 1500 kg New price: approx. €39,900 Price quoted for pickup from the warehouse in 47441 Moers Various cleaners and scrubber-dryers in stock We offer them as shown. Inspection is expressly offered. General: We offer various items here, which we describe as best as possible and provide informative photos. No further information about the item can be provided. Rsdpfx Akowfflvsioch We offer viewings on Tuesdays and Thursdays between 9 a.m. and 4 p.m. by appointment. We offer viewings by telephone on Tuesdays and Thursdays between 9 a.m. and 4 p.m. The item can be picked up immediately if necessary. Due to time constraints, we can only offer answers to this question if you provide us with a telephone number with your inquiry. Unless expressly stated, this item is USED. We offer it as shown. All items are ex warehouse, 47441 Moers. If you require shipping, please contact us to discuss packaging and shipping costs. (Shipping costs are approximately €350 net, depending on distance.) All dimensions are approximate.

Condition: used, Year of construction: 1998, Spindle mount, MK 3, drill chuck 25 mm, clockwise/counterclockwise rotation, 12 speeds: 120 to 2580 rpm (belt change). Storage location: Nattheim. Rcodpsz Eb A Eefx Akioh

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 6,054 h, load capacity: 4,000 kg, lifting height: 3,700 mm, fuel type: diesel, mast type: telescopic, construction height: 2,900 mm, power: 55 kW (74.78 HP), fork length: 1,200 mm, empty load weight: 7,025 kg, total length: 3,658 mm, drive type: Diesel, construction width: 2,060 mm, Rough terrain forklift Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Telescopic Transmission: Torque converter Condition: Ready for use and fully functional Technical condition: very good Front tire type: Pneumatic Front tire size: 18x19.5 Redpfx Akozrir Doioch Rear tire type: Pneumatic Rear tire size: 10x17.5 Description: In addition to this unit, we offer other forklifts and warehouse equipment. Our equipment is workshop-tested and FEM4.004 certified. Please contact us by email or by phone. You can also find us at hsr-gabelstapler. We also purchase your used equipment, even if you do not purchase a vehicle from us. Lease purchase and financing options are available on request at favorable terms. We will be happy to provide you with competent and detailed advice on our vehicles. Side shifter, 3rd valve, rear work light, front work light, heater, dust filter, full cabin, interior mirror, exterior mirror, windshield wiper, single-pedal control, seat.

Condition: excellent (used), Year of construction: 2025, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 31927596, available immediately: RENNER Riko 960/270 ST-KT piston compressor with sound box with star-delta starter Technical data: Motor power: 5.5 kW Rated voltage: 400V Max. pressure: 10 bar Delivery quantity at 7 bar: 740 l/min Cylinder / Stages: 2/2 Sound level: 69 dB(A) Dimensions L x W x H: 985 x 722 x 802 mm Rjdpfxexzgilo Akisch Weight: 206 kg We always have a large selection of new and used compressors in stock! Available immediately.

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 515 mm, travel distance Y-axis: 210 mm, travel distance Z-axis: 1,500 mm, controller manufacturer: FANUC, controller model: 31i-MODEL A5, number of slots in tool magazine: 40, number of axes: 4, This 4-axis Biglia B.1200/S-Smart turn-mill centre was manufactured in 2009. It features a maximum turning length of 1500 mm and a Z-axis travel of 1500 mm. The machine is equipped with an HSK 63 spindle and has a tool capacity of 40 in the automatic tool changer. If you are looking to get high-quality turning and milling capabilities, consider the Biglia B.1200/S-Smart machine we have for sale. Contact us for further details. Rcsdpfjzx Skpox Akieh • TL = 1500 • Coolant in spindle Technical Specification Taper Size HSK 63 Counter Spindle No Driven Tools Yes

Condition: used, Year of construction: 2013, overall weight: 5,000 kg, FANUC Series 32i-MODEL B control unit, with TOP AUTOMAZIONI XF365 linear guide. Rcedpezxrz Usfx Akieh Workholding devices and tools not included. AVAILABLE: November 2026

Condition: new, Year of construction: 2027, functionality: fully functional, workpiece length (max.): 2,500 mm, workpiece width (max.): 1,300 mm, workpiece height (max.): 650 mm, workpiece weight (max.): 1,000 kg, spindle speed (max.): 36,000 rpm, number of spindles: 1, number of slots in tool magazine: 13, Five-axis CNC machining center – 3D CNC machining center Availability: April 2027 > The CNC milling machine base model is the ideal entry-level machine for milling plastics, composite materials such as carbon fiber reinforced polymers (CFRP), model-building materials, or aluminum. > High feed rates, a compact 5-axis milling head for 3D machining, and first-class milling results: The machine is individually adjusted to the material requirements before delivery. This ensures first-class surface quality and excellent milling results for all materials. > Using an attachment from HG GRIMME SysTech, the milling quality can be further significantly improved. Existing attachments or tables can be reused at any time. > Modular expansion stages: The CNC machine can be upgraded at any time, and individual requirements can be quickly implemented. For example, an optional partition wall allows unloading and loading on one half of the table while the workpiece is being machined on the other half. This technology accelerates the production cycle. Redpfxo Adqnus Akiech > Safe operation: The safety cabin already has a generous access area in the basic configuration and can optionally be upgraded with a soundproofing package. All drives and guides are protected and located above the milling area. We offer approximately 365 ways to customize your CNC machining center precisely to your workpiece and material. The base machine can be expanded at any time.

Condition: new, Year of construction: 2027, functionality: fully functional, workpiece length (max.): 2,500 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 600 mm, workpiece weight (max.): 1,000 kg, spindle speed (max.): 24,000 rpm, number of spindles: 1, number of slots in tool magazine: 9, Five-axis CNC machining center – 3D CNC machining center Availability: April 2027 > The CNC milling machine base model is the ideal entry-level machine for milling plastics, composite materials such as carbon fiber reinforced polymers (CFRP), model-building materials, or aluminum. > High feed rates, a compact 5-axis milling head for 3D machining, and first-class milling results: The machine is individually adjusted to the material requirements before delivery. This ensures first-class surface quality and excellent milling results for all materials. Rodpfx As Adqrgskisch > Using an attachment from HG GRIMME SysTech, the milling quality can be further significantly improved. Existing attachments or tables can be reused at any time. > Modular expansion stages: The CNC machine can be upgraded at any time, and individual requirements can be quickly implemented. For example, an optional partition wall allows unloading and loading on one half of the table while the workpiece is being machined on the other half. This technology accelerates the production cycle. > Safe operation: The safety cabin already has a generous access area in the basic configuration and can optionally be upgraded with a soundproofing package. All drives and guides are protected and located above the milling area. We offer approximately 365 ways to customize your CNC machining center precisely to your workpiece and material. The base machine can be expanded at any time.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 6,872 h, spindle motor power: 7,500 W, spindle speed (max.): 7,000 rpm, overall weight: 4,300 kg, total width: 1,440 mm, total height: 1,865 mm, bar diameter (max.): 65 mm, controller manufacturer: FANUC, controller model: Series 31i-MODEL B5, product length (max.): 3,320 mm, number of axes: 11, This 11s STAR MICRONICS SV-38R type B was manufactured in 2015. It features a maximum turning diameter of 38 mm and a maximum headstock stroke of 350 mm. The machine is equipped with a FANUC Series 31i-MODEL B5 CNC control and offers rapid traverse speeds of up to 30 m/min. If you are looking to get high-quality turning capabilities, consider the STAR MICRONICS SV-38R type B swiss-type CNC sliding-headstock automatic lathe we have for sale. Contact us for further details. • Axis diagram: X1, Y1, Z1, X2, Y2, Z2, X3, Y3, Z3, B3, C1, C2 • Machining capacity: • Max turning diameter: 38 mm Rjdpfxo Agmnzj Akijch • Max headstock stroke: 350 mm • Rapid traverse: X1/X2/X3/Y1/Z1/Z2/Z3 30 m/min; Y2 20 m/min; Y3 15 m/min • Main spindle: • C-axis control • Motor power: 7.5 kW continuous / 11 kW (10 min, 25% duty) • Main spindle collet • Synchronous rotary guide bush with air blow • Sub-spindle: • Max speed: 7,000 rpm • C-axis control • Motor power: 5.5 kW continuous / 7.5 kW (10 min, 40% duty) • Sub-spindle collet • Air blow • Tooling system: • 5-position gang tool post • 10-position tool turret • 8-spindle back-working unit • Front drilling: 3 tools per station • Max drilling diameter: 23 mm • Max tapping capacity: M16 × 2.0 • Driven tooling: • Gang tool post: 4 driven positions; max speed 6,000 rpm; motor 2.2 kW • Turret: 2 driven tools per station; max speed 5,700 rpm; motor 2.7 kW continuous / 4 kW (5 min, 30% duty) • Max drilling diameter (driven): 10 mm • Max tapping capacity (driven): M8 × 1.25 • Built-in/standard equipment: • Cut-off tool breakage detection • Automatic central lubrication • Hydraulic unit • Pneumatic unit • Coolant level indicator • Leak detection switch • Work area lighting • RS-232C interface • Operating hours and counters: • Power-on: 24,295 h 59 min • Operating: 21,038 h 55 min 37 sec • Cutting: 6,872 h 30 min 44 sec Additional equipment • Bar feeder: FMB Maschinenbau, model FMB turbo 5-55 / 3200 A (Year 2016) • Max bar length: 3,200 mm • Bar diameter range per supplied spec: 5–65 mm (to be confirmed with feeder documentation) • Feed speed: 0–1,000 mm/s; Return speed: 0–1,000 mm/s • Bar feeder interface • Note: Actual machining diameter limited by lathe to 38 mm • Finished parts conveyor Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), Almost new, used for only 62 hours. Rcodpfoz Ezq Nox Akioh

Year of construction: 1995, condition: used, Max. sawing length: 5,000 mm Max. saw blade diameter: 500 mm Automatic positioning via diamond control of length and angles Rcodpfsv Ip T Dsx Akish Angles can be swiveled inwards and outwards (20-135°) Moving roller conveyor Soundproof cabin Minimum quantity spray device chip conveyor belt Weight: approx. 2,800 kg

Condition: used, Year of construction: 2012, The machine is designed for the production of: • Stand-up pouches (Doypack / SUP) with bottom gusset • Three-side seal pouches (3SS) • Flat pouches • Bottom-gusseted pouches with shaped bottom contours Technical Data: • Machine length: 16,900 mm • Machine width: 5,500 mm • Machine passage width: 800 mm • Operating voltage: 400 V, 50 Hz, 3-phase • Control voltage: 24 V DC Rsdpfx Ajz Szcyokisch • Power rating: 125 kW • Current: 235 A • Maximum web feed speed: 3.0 m/s • Maximum output: 150 cycles/min • Maximum output with stacking system: 130 cycles/min • Main operating side: left-hand side in the direction of web travel Production Capabilities • Three-side-sealed pouches • Stand-up pouches • Pouch width: 90–340 mm • Pouch length: min. 80 mm; max. 375 mm (two lanes), max. 750 mm (single lane) • Bottom gusset depth: 20–75 mm • Processable materials: PET/PE, PA/PE, PET/ALU/PE • Film thickness: 80–250 µm Equipment • Shaftless unwind stand with web edge control • Height-adjustable unwinding position • Unwind stand for 152 mm cores • Maximum clamping width: 1,600 mm • Maximum roll diameter: 1,200 mm • Bottom-gusset strip unwind stand with web edge control • Bottom-gusset strip unwind stand for 76 mm cores • Maximum clamping width for bottom-gusset strips: 450 mm • Maximum roll diameter for bottom-gusset strips: 1,000 mm • Dancer system for roll changes during machine operation • Fine-dust extraction for bottom-gusset strips • Hot embossing station • Sealing presses with cooling, complete sealing process • Bottom-contour punching unit and bottom opener • Punching-knife holder for 310 mm wide knives • Bottom pre-opening unit with additional embossing function • Longitudinal edge trimming with additional punching unit • Six knife holders with trimming blades replaceable during production • Suction conveyor with three waste-removal rollers for punched corners • Pouch stacking unit with lateral discharge conveyor • Reject diverter into a mesh container • Swivelling packing table • Carton sealer and roller conveyor • Matho central extraction system for punching waste • Extraction of bottom-hole, corner and bottom punching waste • Edge-trim extraction with shredding function • Waste collection in a Big Bag

Condition: used, Year of construction: 1990, used, in good condition with Tersa cutterblock and infinitely variable feed Make: SCM Model: S63B Year of manufacture: 1990 Machine no.: 47015 GS-certified Motor: 5.5 kW Redpfjyztzqjx Akisch Planing width approx. 630 mm Planing height approx. 3–240 mm Segment pressure beam 2 steel feed rollers Feed rate: 18 m/min Number of knives: 4 pcs Knife system: Tersa reversible knives Digital height display Electric fine adjustment of height Extraction port D 160 mm Space requirement approx. 1250 x 800 x 1100 mm Weight approx. 750 kg Location: 97447 Gerolzhofen, freely loaded, unpacked Delivery in current inspected condition, without warranty or guarantee

Condition: used, Year of manufacture 2003 Rsdpfow Upn Eex Akijch 2.2 kW 3.0 HP including documentation, COC

Condition: used, TECHNICAL DETAILS - Number of axes : 2 MAIN SPINDLE - Spindle nose : A2-6 - Spindle power : 15 [kW] - Spindle speeds : 4000 [rpm] Rcjdpfx Ajzrh Spjkioh - Max. bar diameter : 68 [mm] COUNTER-SPINDLE * Spindle power : 5.5 [kW] - Max. diameter on bench : 320 [mm] - C axis indexing precision : 0.001 [°] TURRET - Number of positions : 12 - X/Z stroke : 210/500 [mm] - Live tools power : 3.7 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 17 [kW] WEIGHT & DIMENSIONS - Machine floor space : 3900 X 1870 [mm] - Machine height : 1960 [mm] - Machine weight : 4300 [kg] MACHINE HOURS - Number of hours under power : 50508 [h] - Number of working hours : 9147 [h] EQUIPMENT - CNC : Fanuc 18-T - Coolant tank - Chips conveyor - Parts catcher - Collet chuck

Condition: used, Year of construction: 1992, hollow 770 mm 450 mm 800 mm Table dimensions 900 x 900 mm table height 1000 mm Table tiltable 15 Grad Redpjyv I Rpofx Akijch cutting speed 2500 - 3600 m/min sawblade width 35 mm sawblade length 5450 - 5600 mm weight of the machine ca. 1250 kg dimensions 1900 x 1200 x 2470 mm

Condition: used, The Samputensili S 500 B bevel gear cutting machine was designed as a universal machine for flexible machining of gears and is used by manufacturers in gear and transmission technology for the milling of bevel gears. Technical data: Gear diameter: 500 mm Module – max.: 5 Tooth width: 100 mm Space requirement approx.: 4.5 x 3.2 x 2.4 m Machine weight approx.: 13,000 kg *The illustration shows the machine in its current used condition. Upon request, it can be supplied partially modernised, or as a completely retrofitted and modernised machine with new CNC control (SIEMENS ONE). Rjdpfx Akoxz Ef Soiech

Condition: good (used), functionality: fully functional, Hako B43 S combination floor cleaning machine with accessories: Manufacturer : HAKO Werke GmbH Germany S/N 740671353081 Rcsdpfxjty Su Ee Akish Functional Suction pump, washing brush or squeegee Battery charger 24 V Charging voltage 800 W 90 kg CE marked

Condition: reconditioned (used), Year of construction: 2010, operating hours: 1,691 h, functionality: fully functional, working width: 510 mm, area performance: 2,300 m²/h, overall weight: 230 kg, warranty duration: 12 months, water tank capacity: 42 l, HAKO HAKOMATIC B45 CL H TB510 SCRUBBER NEW 12V 105Ah SIAP GEL BATTERIES (2x) Rsdpfx Asxa Ab Iekiech Manufactured in 2010 Only 1691 hours on the machine! The 510mm cleaning head (TB510) is equipped with a new medium-hard disc brush, allowing work on any surface. New polyurethane squeegee rubbers are resistant to contact with oily liquids, grease, and petroleum products. The built-in battery charger and wheel drive simplify daily operation. A new protective rubber around the brush head prevents water from splashing outside the machine's outline. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer is individually photographed; you buy exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 510 Suction nozzle working width (mm): 860 Theoretical capacity (m²): 2300 Brush speed (rpm): 210 Tank capacity (l): 42/42 Machine weight, ready to use (kg): ~230 Power (kW): 1.31 INCLUDED: NEW 12V 105Ah SIAP GEL BATTERIES (2x) NEW 24V 400W suction turbine NEW 510mm PPL 0.5 disc brush NEW suction hose NEW drain hose NEW head guard rubber Squeegee blade with new oil-resistant rubbers Built-in battery charger 5 liters of Tenzi Normal fluid - FREE KEY FEATURES: The 42-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The large working width (510 mm) ensures high surface coverage. The control panel is very clear and intuitive.

Condition: reconditioned (used), Year of construction: 2011, operating hours: 873 h, functionality: fully functional, working width: 750 mm, area performance: 4,800 m²/h, overall weight: 716 kg, warranty duration: 12 months, water tank capacity: 105 l, HAKO HAKOMATIC B750 R TB750 SCRUBBER NEW 6V 250Ah GEL BATTERIES (SIAP) (4x) Manufactured in 2011 with 873 hours of operation 750mm cleaning head (TB750) equipped with two new medium-hard disc brushes for use on any surface. New polyurethane squeegee rubbers, resistant to oil, grease, and petroleum products. New rubber guards around the brush head prevent water from splashing outside the machine's outline. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 750 Suction width (mm): 960 Theoretical capacity (m²/h): 4800 Clean/dirty water tank capacity (l): 105/105 Number of brushes (pcs): 2 Brush speed (rpm): 210 Total weight, ready to use (kg): 716 Gradeability (%): 10 INCLUDED: NEW 6V 250Ah SIAP GEL BATTERIES (x4) NEW 24V 600W suction turbine NEW 380mm PPL 0.5 disc brushes (x2) NEW drain hose NEW suction hose NEW head guard rubbers (x2) Built-in battery charger Squeegee blade with new rubbers 5L Tenzi Normal fluid - FREE KEY FEATURES: The 105-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. Rcedpjzuc Tgsfx Akieh The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The ergonomically designed cockpit and centrally located operator's seat provide excellent visibility of the surface being cleaned. The large working width (750mm) ensures high surface coverage. The control panel is very clear and intuitive to use.

Condition: reconditioned (used), Year of construction: 2009, operating hours: 2,173 h, functionality: fully functional, working width: 430 mm, area performance: 1,700 m²/h, overall weight: 179 kg, warranty duration: 12 months, water tank capacity: 30 l, HAKO HAKOMATIC B30 TB430 SCRUBBER NEW 12V 85Ah SIAP GEL BATTERIES (2x) Manufactured in 2009 with 2173 hours of operation 430mm cleaning head (TB430) equipped with a new medium-hard disc brush, allowing work on any surface. New polyurethane squeegee rubbers, resistant to contact with oily liquids, grease, and petroleum products. A built-in battery charger simplifies daily operation. A new protective rubber around the brush head prevents water from splashing outside the machine's contour. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer is individually photographed; you buy exactly what you see. Rjdpfjza Tf Sex Akiech TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 430 Suction nozzle working width (mm): 760 Theoretical capacity (m²): 1700 Tank capacity (l): 30/30 Machine weight, ready to use (kg): ~179 Power output (kW): 1.13 INCLUDED: NEW 12V 85Ah SIAP GEL BATTERIES (2x) NEW 24V 400W suction turbine NEW 430mm PPL 0.5 disc brush NEW drain hose NEW suction hose NEW head guard rubber Built-in battery charger Squeegee blade with new oil-resistant rubbers 5L Tenzi Normal fluid - FREE KEY FEATURES: The 30-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise solution extraction from the cleaned surface. The large working width (430mm) ensures high surface coverage. The control panel is easy to read and intuitive to use.

Year of construction: 2014, condition: ready for operation (used), A T-S-I mixing and dosing system for adhesives is available. System type: two-component gear pump dosing system, material type: 2K silicone, swivel arm length: 1200mm, hose length: 2500mm, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1800mm, weight: approx. 650kg. Documentation available. On-site inspection is possible. Redpfx Aowfg E Dokiech

Condition: good (used), Ride-on Scrubber Dryer Hakomatic B 750 R – used - : Price ex location: only €1,250 (net)! Redex El S Ajpfx Akisch The battery is deeply discharged, possibly defective! Manufacturer: Hako Model: Hakomatic B 750 R Year of manufacture: unknown Serial number: 7090205065514 Operating hours: 850 h Battery is deeply discharged Condition: good Available: immediately Location: Warehouse Frankenberg / Saxony

Condition: reconditioned (used), Year of construction: 2010, operating hours: 1,979 h, functionality: fully functional, working width: 750 mm, area performance: 3,700 m²/h, overall weight: 480 kg, warranty duration: 12 months, water tank capacity: 85 l, HAKO HAKOMATIC B90 TB750 SCRUBBER NEW 6V 175Ah SIAP GEL BATTERIES (4x) Manufactured in 2010 with 1979 hours of operation 750mm cleaning head (TB750) equipped with two new medium-hard disc brushes for use on any surface. New polyurethane squeegee rubbers, resistant to oil, grease, and petroleum products. The built-in battery charger and wheel drive simplify daily operation. A new protective rubber around the brush head prevents water from splashing outside the machine's outline. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer is individually photographed; you buy exactly what you see. TECHNICAL DATA: Power supply voltage (V): 24 Brush working width (mm): 750 Suction nozzle working width (mm): 1100 Theoretical capacity (m²/h): 3700 Working speed (km/h): 5 Tank capacity (l): 85/85 Weight (kg): ~480 Power (kW): 2.6 INCLUDED: NEW BATTERIES 6V 175Ah SIAP GEL BATTERY (4x) NEW 24V 500W suction turbine NEW 380mm PPL 0.5 disc brushes (2x) NEW suction hose NEW drain hose Rcsdpfxjy Iyags Akioh NEW head guard rubber Squeegee blade with new oil-resistant rubbers Built-in battery charger 5 liters of Tenzi Normal solution - FREE KEY FEATURES: The 85 liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The large working width (750mm) ensures high surface coverage. The control panel is very clear and intuitive.