Used Beam Hall for sale (5,475)

Condition: used, Year of construction: 2006, cutting length (max.): 3,200 mm, saw blade diameter: 650 mm, cutting height (max.): 200 mm, cutting width (max.): 3,200 mm, saw drive: 35,000 W, input frequency: 50 Hz, type of input current: AC, input voltage: 400 V, compressed air connection: 6 bar, sheet thickness aluminum (max.): 200 mm, space requirement length: 6,855 mm, space requirement width: 6,280 mm, space requirement height: 2,400 mm, working height: 1,100 mm, Mayer AL 160 Panel beam saw for aluminum and non-ferrous metals with a maximum package height of 200 mm. Technical data: Year of manufacture: 2006 Cutting length: 3,200 mm Cutting width: 3,200 mm Maximum package height: 200 mm Maximum material clamp opening: 210 mm Saw motor power: 35 kW Saw blade diameter: 650 mm Saw unit forward speed: 0.2 - 60 m/min. Saw unit reverse speed: 60 m/min. Material pusher forward speed: 10 m/min. Material pusher reverse speed: 20 m/min. Extraction connections: 1 x Ø 140 mm, 1x Ø 160 mm Pneumatic operating pressure: min. 5 bar, max. 6 bar Pneumatic compressed air requirement: 720 Nl/min. Working height: 1,100 mm Overall height: 2,400 mm Installation length: approx. 6,855 mm Gtsdpfxexx Anle Admjt Installation width: approx. 6,280 mm Condition: The machine is largely functional and is currently in use in production.

Condition: good (used), LED high bay light, light fixture, high bay light, industrial lighting, industrial lamp, linear light, LED spotlight, high bay low beam light -Manufacturer: lichtline, LED high bay light with swivel arm Gjdpjh N Tifjfx Admett -Power: 150 watts 5000K -Swivel arm: Length 3860 mm -Dimensions: 3860/340/H210 mm -Weight: 56 kg

Condition: good (used), functionality: fully functional, Characteristics: * Length: 40 m * Width: 20 m * Height (center): 10.2m * Height (side): 6 m * PVC roof: 850 gr/m2 Gtedpfx Adjwbtayemst Description: Aluminum profile building of 800 m² with PVC roof. The building is equipped with a control cabinet, 6 electric air heating units (with temperature control), lighting and several outlets 220/380. Furthermore, there are 2 electric overhead doors. The building is demountable and can be expanded if required.

Condition: used, tank capacity: 2,420 l, GENERAL Equipment: Lifting lugs Design: suspended Remarks: Manhole DN 350/450 (manhole cover incomplete); support ring, Fe; flanges partially Fe Speed: 46 - 230 rpm Internal diameter: 1,400 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX guidelines under local conditions must be verified) Overall height: 3,400 mm Heating/Cooling: available Power: 2.2 kW Max. permissible operating temperature: 200°C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Top head: top head removable / hinged Agitator seal: Mechanical seal with thermosiphon vessel Agitator type: Paddle agitator Support type: Ring Location: Bremen Technical documentation: Drawing, various documents, acceptance certificate Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 2,420 liters Jacket volume: 100.0 liters Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4435 (AISI 316) Condition: used Cylindrical height: 1,180 mm Last application: Pharmaceutical chemicals VESSEL Max. permissible operating temperature: 200°C HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Bottom temperature control: Half-pipe coil EQUIPMENT Manhole / Dome: in the top head Outlet: available MATERIAL SPECIFICATION Temperature control system material: AISI 304 (V2A) 1.4306 AGITATOR 1 Agitator manufacturer: Ekato Voltage: 400 Volt Power breaker: TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6.1 mm Agitator arrangement: centered in the top head Agitator equipment: Paddle & propeller agitator elements mounted on the shaft; speed previously controlled by external frequency converter (no longer available); various technical documents for the agitator available Gtsdpfexqaycjx Admst Top head wall thickness: 7 mm

Condition: good (used), ApenGroup LRP28DE Gas-Fired Warm Air Generator Gas Type: G20 Natural Gas Connection Pressure: 20 mbar Nominal Heat Input QN: 27 kW Nominal Heat Output: 24.63 kW Connection Voltage: 230V 1N, 50Hz Airflow: 2700 m³/h Protection Class: IP20 Find more items – new and used – in our shop! Gtodpfx Adjx Ihlksmjt International shipping costs on request!

Condition: good (used), Year of construction: 1988, Ja Stanzkraft 800 kN frequency 50 Hz current 17/11 A voltage 220/380 V round bar steel 32-17 mm Gtjdpfxsryaqys Admet square edge steel 30-18 mm 100 x 10 mm flat steel 350 x 16 mm throat 200 mm work height max. 1107 mm total power requirement 4 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 1200 x 700 x 1850 mm

Condition: used, Year of construction: 2002, Empty weight: 75 kg - Year: 2002 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 991 - Voltage [V]: 230 - Current consumption [A]: 0.07 - Power [kW]: 0.1 Gsdpjwtx Umjfx Admjtt - Transport weight [kg]: 75kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2023, functionality: fully functional, power: 114 kW (155.00 HP), fuel: diesel, Equipment: documentation/manual, type plate available, The REMKO "CLK 120" heating cannon is a powerful heater suitable for use in warehouses, workshops, marquees, materials, greenhouses, and more. Currently, 3 units are immediately available from stock. Condition: New / unused from warehouse clearance / insolvency Scope of delivery: - 1 Remko CLK 120 heating unit with oil burner - 1 Roth mobile heating oil tank 1000 L - 1 room thermostat with connection cable Rated heat load: 114 kW Air output: 8050 m³/h Fuel: heating oil EL Fuel consumption: max. 11.2 L/h Flue gas loss: max. 9% Godpfexgbbtjx Admstt Flue gas connection: Ø 200 mm Air outlet: Ø 500 mm Connection voltage: 230 V Dimensions (H/W/D): approx. 1350 x 920 x 2100 mm Weight: approx. 296 kg The machine can be viewed on site by appointment. All information without guarantee. Subject to prior sale.

Condition: good (used), Here we offer a laser beam source from Coherent with PC. Name: AVIA 355-X Operating hours: Diodes 1975/1975, Head 26488 Wavelength: 355nm Excitation: diode pumped Laser type: Nd:YAG laser Gjdjdmzhqspfx Admjtt Laser type 2: THG, Q-switch Operating mode: pulsed Laser power: 10 W at 60 kHz Beam divergence:

Condition: used, tank capacity: 3,690 l, GENERAL INFORMATION Design: suspension-mounted Remarks: Support ring made of steel; manway cover incomplete; on one vessel, the heating connections are mostly cut off and supplied loose; one vessel is approximately 100 mm shorter in overall height due to different motor/gearbox assemblies Speed: 42 - 211 rpm Internal diameter: 1,600 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be verified) Total height: 3,750 mm Heating/Cooling: available Power: 3 kW Max. allowable operating temperature: 200 °C Max. allowable operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Agitator: blade agitator Support design: ring mounting Location: Bremen Technical documentation: drawing, various documents, inspection certificate Gtodexqax Eopfx Admjt Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 3,690 litres Double jacket volume: 145.0 litres Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4435 (AISI316) Condition: used Cylindrical height: 1,380 mm Last application: pharmaceutical chemistry VESSEL Max. allowable operating temperature: 200 °C HEATING/COOLING JACKET Max. allowable operating underpressure: 1.0 bar Bottom temperature control: half-pipe coil EQUIPMENT Manway / dome: in top head (DN 500) Outlet: 130 mm MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) AGITATOR 1 Agitator manufacturer: Ekato Voltage: 400 Volt TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6.1 mm Agitator positioning: centred on the top head Agitator features: Minor variations in agitator design (Interprop blade agitator installed on the shaft for media up to approx. 3,000 mPas; on one vessel an additional stabilising propeller is mounted on the shaft); speed range adjustable via external speed controller (no longer available) (for one of the agitators this speed range is 25 - 126 rpm); partial technical documentation on agitators available Top head wall thickness: 7.9 mm

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Generator UDSA Gas-Fired Warm Air Generator – Efficient to the Peak Gtedpfox Ihiisx Admst The best-known appliance from REZNOR is the UDSA gas-fired warm air generator, which ensures even air distribution in industrial buildings. This easy-to-install recirculating air unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner, and exhaust fan. Combustion air can be drawn either from outside or from the showroom (standard configuration). The REZNOR UDSA warm air generator guarantees even air distribution throughout the heated building. Its patented heat exchanger sets new standards in terms of airflow and heat transfer, achieving an efficiency of over 92 percent. UDSA: compact, revolutionary, and trendsetting. This generation of appliances allows for the particularly economical direct heating of buildings – without a central heating system – using decentralized, modulating gas-fired warm air generators. REZNOR UDSA Gas-fired warm air generator. The advantages: Efficiency of over 92% Suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation CE system certified, version B or C Compact design for easy installation Uniform heat distribution Standard vertical and horizontal air guide vanes Heating output modulation up to 50% EC technology ErP Ready These units are direct-fired gas-fired warm air generators with fan-assisted atmospheric multi-gas burners. Installation of the gas-fired warm air generator, including gas and flue connections, must be carried out by an authorized installation company. The gas-fired WLEs are suitable for: - Natural gas or LPG operation - Forced air operation - Intake temperatures below 5°C with stainless steel heat exchanger* - Heating operation, 1-stage or 2-stage*, controlled via room thermostat and heating control switch - Ventilation° controlled via ECOtronic TN-L° with day/night/weekly program. Flue gas discharge via roof, version B or C ° Flue gas discharge through the exterior wall, version C ° Gas-fired WLE type: UDSA015-4 Gas appliance type: B22P-C12-C32-C52-C62-C82 Regulation: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 7.80 mbar Max. nominal heat input (Hs) QN: 17.60 kW Max. nominal heat input (Hi) QN: 15.86 kW Max. rated heat output: 14.59 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 1360 m³/h Protection class: IP20 Find more items – new and used – in our shop! International shipping costs on request!

Condition: good (used), Heating fan, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating coil -Handover: in its current condition as inspected Gtodpfx Asxxic Nsdmst -Heat exchanger: without fan -Manufacturer: GEA Happel, air heater heat exchanger -Type: 4124/403/441 -Fan: not included -Operating pressure: max 13.7 bar -Dimensions: 890/460/H560 mm -Weight: 82 kg

Condition: new, Year of construction: 2023, functionality: fully functional, power: 150 kW (203.94 HP), fuel: diesel, Equipment: documentation/manual, type plate available, The REMKO "CLK 150" heat cannon is a high-performance heater suitable for use in halls, workshops, marquees, materials, greenhouses, and more. Currently, 3 units are in stock for immediate delivery. Condition: New / unused from warehouse clearance / insolvency Scope of delivery: - 1 Remko CLK 150 heater with oil burner - 1 Roth mobile heating oil tank, 1000 L - 1 Room thermostat with connecting cable Nominal heat load: 150 kW Air output: 9710 m³/h Fuel: EL heating oil Maximum fuel consumption: 14.8 L/h Flue gas losses: max. 9% Flue gas connection: Ø 200 mm Air outlet: Ø 500 mm Connection voltage: 230 V Gsdjxli I Sopfx Admjtt Dimensions (H/W/D): Approx. 1350 x 920 x 2100 mm Weight: approx. 312 kg The machine can be inspected on site by appointment. All information provided without guarantee. Subject to prior sale.

Condition: excellent (used), Coherent Type: 205 F Laser beam source from Coherent COMPex Pro Compact, easy-to-integrate excimer laser. COMPex excimer lasers are highly effective light sources, with a compact design and easy installation and operation. They deliver excellent results in demanding applications, such as solid sampling systems (LA-ICPMS), materials research Godpfx Adjvx Sz Eomjtt (PLD) and precise material processing. With ceramic pre-ionization, the COMPex offers output power of several hundred millijoules plus unmatched pulse-to-pulse stability. The COMPex also comes with an improved gas processor that extends the lifetime of both the gas and the optics. Applications • PLD – Pulsed Laser Deposition • Thin wafer processing • Laser lift-off/debonding • LA-ICP-MS Pulse energy1 (mJ) Wavelength 400 Max. repetition rate 50 Hz Electrical: 230 V AC, 16 A, 50/60 Hz switchable, 1-phase Dimensions L x W x H 1658 x 375 x 813 mm³ Weight: 325 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, tank capacity: 3,586 l, GENERAL Equipment: lifting lugs Design: suspended Remarks: Sight glasses in manway covers missing; support ring made of Fe; some flanges made of Fe Speed: 30–184 rpm Internal diameter: 1,600 mm Explosion proof: Motor is explosion-proof (compliance with current ATEX directives under local conditions must be verified) Gtedpfx Aexqaxxodmjt Overall height: 3,750 mm Heating/Cooling: available Power: 6.8 kW Max. allowable operating temperature: 200 °C Max. allowable operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Agitator: beam agitator Base design: ring Location: Bremen Technical documentation: drawings, various documents, inspection certificate Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Capacity: 3,586 liters Double jacket volume: 202.0 liters Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4435 (AISI316) Condition: used Cylindrical height: 1,377 mm Last application: pharmaceutical chemicals VESSEL Max. allowable operating temperature: 200 °C HEATING/COOLING JACKET Max. allowable operating vacuum: 1.0 bar Bottom temperature control: half-pipe coil EQUIPMENT Manhole / Dome: on top head (DN 500) Outlet: 130 mm MATERIAL DETAILS Temperature control system material: AISI 304 (V2A) 1.4306 AGITATOR 1 Agitator manufacturer: Ekato Voltage: 400/690 Volt Current interrupter: TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6.5 mm Agitator arrangement: centrally in top head Agitator equipment: Technical documentation for agitator available; Interprop beam agitator and inclined blade agitator installed on shaft; speed adjustable by handwheel Top wall thickness: 9.1 mm

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Generator UDSA Gas-Fired Warm Air Generator – Efficient to the Peak The best-known appliance from REZNOR is the UDSA gas-fired warm air generator, which ensures even air distribution in industrial buildings. This easy-to-install recirculating air unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner, and exhaust fan. Combustion air can be drawn either from outside or from the showroom (standard configuration). The REZNOR UDSA warm air generator guarantees even air distribution throughout the heated building. Its patented heat exchanger sets new standards in terms of airflow and heat transfer, achieving an efficiency of over 92 percent. UDSA: compact, revolutionary, and trendsetting. This generation of appliances allows for the particularly economical direct heating of buildings – without a central heating system – using decentralized, modulating gas-fired warm air generators. REZNOR UDSA Gas-fired warm air generator. The advantages: Efficiency of over 92% Suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation CE system certified, version B or C Compact design for easy installation Uniform heat distribution Standard vertical and horizontal air guide vanes Heating output modulation up to 50% EC technology ErP Ready These units are direct-fired gas-fired warm air generators with fan-assisted atmospheric multi-gas burners. Installation of the gas-fired warm air generator, including gas and flue connections, must be carried out by an authorized installation company. Gsdpfx Adex Ihg Iomott The gas-fired WLEs are suitable for: - Natural gas or LPG operation - Forced air operation - Intake temperatures below 5°C with stainless steel heat exchanger* - Heating operation, 1-stage or 2-stage*, controlled via room thermostat and heating control switch - Ventilation° controlled via ECOtronic TN-L° with day/night/weekly program. Flue gas discharge via roof, version B or C ° Flue gas discharge through the exterior wall, version C ° Gas-fired WLE type: UDSA025-3 Gas appliance type: B22P-C12-C32-C52-C62 Regulation: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 8.20 mbar Max. nominal heat input (Hs) QN: 30.08 kW Max. nominal heat input (Hi) QN: 27.75 kW Max. rated heat output: 25.53 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 2385 m³/h Protection class: IP20 Find more items – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), Here we offer a laser beam source from Coherent. Designation: AVIA 355-X Operating hours: Diodes 43022/43022, Head 42955 Crystal Shifter: 1845.91 hours Wavelength: 355nm Excitation: diode pumped Laser type: Nd:YAG laser Laser type 2: THG, Q-Switch Operating mode: pulsed Gtjdpfoihp Arex Admjt Laser power: 10 W at 60 kHz Beam divergence :

Condition: used, tank capacity: 3,860 l, GENERAL INFORMATION Equipment: Crane lugs Design: Suspended Notes: Support ring, Fe; manhole cover incomplete (see photos) Rotation speed: 61 rpm External diameter: 2,090 mm Internal diameter: 1,800 mm Explosion protection: Motor is explosion-proof (compliance with current ATEX directives under local conditions must be verified) Total height: 3,050 mm Heating/Cooling: available Insulation: available Power: 4 kW Max. permitted operating temperature: 200 °C Max. permitted operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Agitator: Beam agitator Stand/base type: Ring Location: Bremen Technical documentation: Drawing, various documents Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 3,860 litres Double jacket volume: 136.0 litres Cylinder wall thickness: 6 mm Product contact material: V4A 1.4435 (AISI316) Condition: used Last application: pharmaceutical chemistry VESSEL Max. permitted operating temperature: 200 °C HEATING/COOLING JACKET Gtsdpfx Adjxqaxlomjt Max. permitted operating vacuum: 1.0 bar Bottom temperature control: Half-pipe coil INSULATION Insulation jacket: riveted Insulation jacket material: aluminium EQUIPMENT Manway / Dome: in upper head (DN 600) Outlet: available Note: Dents in insulation jacket, manway cover plated MATERIAL SPECIFICATION Temperature control system material: AISI 304 (V2A) 1.4306 AGITATOR 1 Voltage: 400/690 Volt TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5.17 mm Agitator arrangement: centrally positioned in upper head Agitator equipment: Gearbox housing slightly damaged in one area (see photos) Upper head wall thickness: 8.14 mm

Condition: excellent (used), Reznor UDSA Gas-Fired Warm Air Generator UDSA Gas-Fired Warm Air Generator – Efficient to the Peak The best-known appliance from REZNOR is the UDSA gas-fired warm air generator, which ensures even air distribution in industrial buildings. This easy-to-install recirculating air unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner, and exhaust fan. Combustion air can be drawn either from outside or from the showroom (standard configuration). The REZNOR UDSA warm air generator guarantees even air distribution throughout the heated building. Its patented heat exchanger sets new standards in terms of airflow and heat transfer, achieving an efficiency of over 92 percent. UDSA: compact, revolutionary, and trendsetting. This generation of appliances allows for the particularly economical direct heating of buildings – without a central heating system – using decentralized, modulating gas-fired warm air generators. REZNOR UDSA Gas-fired warm air generator. The advantages: Efficiency of over 92% Suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation CE system certified, version B or C Compact design for easy installation Uniform heat distribution Gsdpox Ig Ttofx Admjtt Standard vertical and horizontal air guide vanes Heating output modulation up to 50% EC technology ErP Ready These units are direct-fired gas-fired warm air generators with fan-assisted atmospheric multi-gas burners. Installation of the gas-fired warm air generator, including gas and flue connections, must be carried out by an authorized installation company. The gas-fired WLEs are suitable for: - Natural gas or LPG operation - Forced air operation - Intake temperatures below 5°C with stainless steel heat exchanger* - Heating operation, 1-stage or 2-stage*, controlled via room thermostat and heating control switch - Ventilation° controlled via ECOtronic TN-L° with day/night/weekly program. Flue gas discharge via roof, version B or C ° Flue gas discharge through the exterior wall, version C ° Gas-fired WLE type: UDSA025-4E Gas appliance type: B22P-C12-C32-C52-C62-C82 Regulation: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 8.20 mbar Max. nominal heat input (Hs) QN: 30.08 kW Max. nominal heat input (Hi) QN: 27.75 kW Max. rated heat output: 25.53 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 2385 m³/h Protection class: IP20 Find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Trumpf Type: TruDisk 4002 / W20.HL29 Trumpf TruDisk 4002 laser beam source with KLH cooler The Trumpf TruDisk 4002 laser beam source is an industrial disk laser source (disk laser) from TRUMPF, characterized by high power, beam quality, and efficiency. It is frequently used for welding, cutting, and other material processing applications. Gtedpfxjwh Rnzj Admot Maintenance has been performed regularly. Unit consisting of a beam source with associated cooler, but without optics and fiber optic cable. Technical Specifications Laser power: 4,000 watts (4 kW) (minimum 80 W) Wavelength: ~1030 nm (infrared range) (Yb:YAG) Beam quality (BPP): typically ≤ 8 mm mrad Fiber connection: TruDisk lasers usually have multiple fiber connections Cooling: Water-cooled – via a KLH cooler Dimensions: 1.0 x 2.0 x H1.6 m (laser) + 1.0 x 1.5 x 1.8 m (cooler) 380 V -10% ... 460 V +10%, 3AC + PE 23 kW / 25 kV A - 34 A / 400 V 50 ... 60 Hz KLH cooler: The KLH cooler is an industrial liquid cooler that ensures heat dissipation from high-performance laser systems such as the TruDisk 4002. Typical Features: Water-to-water cooling Precise temperature control (typically 20–25°C) Refrigerant: R 404A Can be controlled via TRUMPF interface Required to comply with laser specifications Device Type W20.HL29 Weight: 850 kg (laser) + estimated 550 kg (cooler) Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions over the phone.

Condition: used, tank capacity: 2,500 l, GENERAL Equipment: crane lugs Design: suspended Notes: 4 support brackets made from V2A; manhole cover fastening bolts incomplete; 1 former connection on the top head was welded shut by the previous operator Internal diameter: 1,390 mm Overall height: 3,000 mm Heating/cooling: available Max. permissible operating temperature: 190 °C Gtjdoxqaw Ispfx Admet Max. permissible operating overpressure: 3.0 bar Max. overpressure: 1.0 bar Agitator: beam agitator Agitator mounting: agitator flange Support type: brackets Location: Bremen Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 2,500 liters Jacket volume: 35.0 liters Cylinder wall thickness: 5 mm Product-contacting material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 1,500 mm Last previous use: chemicals VESSEL Max. permissible operating temperature: 190 °C HEATING/COOLING JACKET Bottom temperature control: half-pipe coil EQUIPMENT Manhole / dome: on top head (DN 500) Discharge: flange DN50 Note: slight adhesions, motor/gearbox missing MATERIAL QUALITY Temperature control system material: V2A 1.4541 (AISI304) AGITATOR 2 Agitator arrangement: lateral on cylinder AGITATOR 1 Agitator manufacturer: Ekato Baffle: TECHNICAL DATA / DIMENSIONS Base wall thickness: 4.6 mm Agitator arrangement: eccentric in top head

Condition: used, tank capacity: 5,000 l, GENERAL INFORMATION Equipment: Ball valve Design: Suspended Remarks: Top cover made from V2A (1.4301); 4 support feet made of steel; minor material wear inside the vessel Internal diameter: 1,880 mm Total height: 3,550 mm Heating/Cooling: present Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Top cover: Removable / hinged top cover Agitator type: Beam agitator Stand type: Feet Location: Bremen Cylinder temperature control: Half-pipe coil Nameplate: Volume: 5,000 liters Cylinder wall thickness: 10.2 mm Product-contacting material: V4A 1.4429 (AISI316) Condition: Used Cylindrical height: 1,580 mm Last application: Chemical industry HEATING/COOLING JACKET Bottom temperature control: Half-pipe coil EQUIPMENT Manway / Dome: On the top cover (Ø 450) Outlet: DN40 DIN 11851 Note: Light residues, motor/gearbox missing MATERIAL SPECIFICATION Top cover material: AISI304 (V2A) 1.4301 Temperature control system material: V2A 1.4301 (AISI304) Flange material: Steel AGITATOR 1 Agitator manufacturer: Fluid Godpjxqawuofx Admstt TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 8.3 mm Agitator arrangement: Centered in top cover Top cover wall thickness: 4.5 mm

Condition: used, tank capacity: 5,650 l, GENERAL Equipment: Lifting lugs Design: Suspended Remarks: Lugs made of steel; the insulation jacket has partially detached in the area of the lower base (see photos) Speed: 55.8 rpm Outer diameter: 2,100 mm Inner diameter: 1,800 mm Explosion-proof: Motor is explosion-proof (compliance with current ATEX guidelines under local conditions must be verified) Overall height: 3,750 mm Heating/Cooling: available Insulation: available Power: 2 kW Max. permitted operating temperature: 200 °C Max. permitted operating overpressure: 6.0 bar Max. excess pressure: 3.2 bar Mechanical seal: Mechanical seal with thermosiphon vessel Agitator: Beam agitator Support design: Feet Location: Bremen Cylinder tempering: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 5,650 liters Double jacket volume: 166.0 liters Product-contact material: V4A 1.4571 (AISI316) Condition: used Last intended application: Pharmaceutical chemistry VESSEL Max. permitted operating temperature: 200 °C Number of legs: 4 pieces HEATING/COOLING JACKET Bottom tempering: Half-pipe coil INSULATION Insulation jacket: bolted Insulation material: PU foam Insulation jacket material: galvanized steel EQUIPMENT Manhole/dome: in top head (DN 500) Outlet: 140 mm Gsdpfexqah Hsx Admstt MATERIAL SPECIFICATION Tempering system material: V2A 1.4301 (AISI304) AGITATOR 1 Voltage: 220/380 Volt Agitator mounting: central in the top head Agitator equipment: Provisions for flow breakers inside the vessel (flat plates for flow breakers not present; see photos)

Condition: used, tank capacity: 60,000 l, GENERAL Equipment: Venting, spray head, crane lugs Design: Upright Outer diameter: 3,880 mm Inner diameter: 3,700 mm Total height: 9,200 mm Insulation: available Agitator: Beam agitator Base type: Skirted base Location: Outdoor storage Volume: 60,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last previous application: Food TANK Bottoms: Conical bottom EQUIPMENT Manhole / dome: in the shell Gjdox Dmcqjpfx Admott AGITATOR 1 Bottom bearing: Agitator arrangement: eccentric on top head

Condition: used, Year of construction: 2006, tank capacity: 10,000 l, GENERAL INFORMATION Equipment: Crane lugs Design: Vertical Gtodpox Dmbajfx Admjt Year of manufacture: 2006 Remarks: Nameplate no longer available; cylinder manhole diameter 600 mm; minor dent on the side of the vessel Internal diameter: 2,500 mm Total height: 3,800 mm Power: 3 kW Top head: Flat bottom Agitator: Beam agitator Support design: Height-adjustable feet Location: Outdoor storage Technical documentation: Drawing Volume: 10,000 liters Cylinder wall thickness: 3 mm Product-contact material: V4A 1.4401/04 (AISI316) Condition: Used Cylindrical height: 2,000 mm Last product processed: Sludge VESSEL Max. allowable operating temperature: 80 °C Specific gravity of medium: 1.8 (to/m³) Bottom head: Conical bottom Number of feet: 3 pcs EQUIPMENT Manhole/Dome: In cylinder, in top head (Ø 430 mm) Outlet: Flange DN80 Note: Minor residues MATERIAL SPECIFICATION Foot material: Stainless steel AGITATOR 1 Agitator manufacturer: Fluid Voltage: 380/660 volts TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 4 mm Agitator positioning: Eccentric in top head