Used Curved Beams for sale (4,839)

Condition: as good as new (ex-display), Year of construction: 2025, Double side planer (Double Surface Planer ) extra wide 400 mm Maximum working width 400 mm Maximum working height 200 mm Dodpfxszauzbo Aqvekn Heavy cardan feed system Special spike feedsystem Unlike the conventional chain drive systems, this machine employs a patented synchronized transmission system along the four fitting columns. Electronic height adjustment Spiral cutterheads top and bottom Latest generation IE-3 motors Spindle and feed brakes CE

Condition: excellent (used), Panel saw HOLZ-HER Cut 70 6110 - used - PC control with optimization, scorer, automatic cut length detection, side pressing device, air cushion tables, infinitely variable feed of the saw carriage, touchscreen, label printer ----- Technical data ----- Cutting length: 3900 mm, Cutting width: 3100 mm, max. cutting height: 70 mm, Number of clamping devices: 6 pieces, Feed rate saw unit max.: 0-70 m/min., Feed rate width guide max.: 25/70 m/min., Motor power main saw: 11 kW, Motor power scorer: 1.1 kW, Saw blade main saw Ø: 350 mm, Saw blade scoring saw Ø: 180 mm, Extraction port Ø bottom: 120 mm, Extraction port Ø on the pressure beam: 3 x 120 mm, max. fuse rating: 35 A, Dsdeyu N Rgjpfx Aqvokn Rated current of the largest consumer: 20.6 A Quality information: - Saw spindle newly bearinged - Scorer newly bearinged - complete basic inspection - complete basic cleaning - electrical system checked - ready for immediate use

Condition: excellent (used), Pressure beam saw PANHANS ECOPAN -used- PC control with optimization, scoring unit, automatic cut length detection, side pressure device, air cushion tables, movable tables, infinitely variable feed rate of the saw carriage, label printer ----- Technical Data ----- Cutting length: 4,200 mm, Cutting width: 4,200 mm, Max. cutting height: 72 mm, Number of clamps: 6 pcs, Feed rate saw unit max.: 100 m/min, Feed rate for width stop max.: 80 m/min, Main saw motor power: 11 kW, Scoring saw motor power: 1.5 kW, Main saw blade Ø: 300 x 30 mm, Scoring saw blade Ø: 180 x 30 mm, Extraction port Ø bottom: 140 mm, Extraction port Ø on pressure beam: 3x100 mm, Airflow volume: 5,000 m³/h, Compressed air connection: 6 bar, Djdpfx Aeyrqrtjqvokn Air consumption: 140 l/min, Nominal current: 38 A, Max. circuit breaker: 50 A Quality information: - complete basic inspection - complete basic cleaning - Electrics checked - immediately ready for operation

Condition: used, Year of construction: 1997, Beam planer 260 x 160 mm, trailing chamfer unit on the upper spindle, air cushion table with two-axis control for left and upper spindle, factory-new control system (latest Weinig version) Max. working width: 260 mm Max. working height: 160 mm Number of spindles: 6 1st spindle: bottom, spindle diameter 40 mm, clamping length 270 mm, speed 6000 rpm, motor power 11.0 kW 2nd spindle: right, spindle diameter 40 mm, clamping length 170 mm, speed 6000 rpm, motor power 11.0 kW (shared motor with left spindle) 3rd spindle: left, spindle diameter 40 mm, clamping length 170 mm, speed 6000 rpm 4th spindle: top, spindle diameter 40 mm, clamping length 270 mm, speed 6000 rpm, motor power 11.0 kW 5th spindle: bottom, spindle diameter 40 mm, motor power 11.0 kW, speed 6000 rpm, clamping length 270 mm 6th spindle: top, chamfering unit Motor brakes: mechanical Height adjustment of upper spindle: electric Optionally with/without feed Feed brake system: Yes Feed speed infinitely variable up to: 3 – 23 m/min Feed roller pressure: pneumatic Feed power: 4.0 kW Feed drive: cardan Lubricant pump: manual Max. planing depth: 10 mm Jointing cutter on jointer: Yes Powered rollers in table: 1 Control type: PLC control Spindle position display: mechanical numerical display Infeed rollers before jointer: Yes Air cushion table: triple track Central lubrication point: Yes Description: short infeed table 1050 mm with internal lighting Dkodpfxewwwkhe Aqvjn Location: Nattheim

Year of construction: 2001, condition: good (used), approx. 2 pieces Transnorm conveyor curve 45 degrees - second-hand - : Price per piece: 950.-€ (net), dismantled and loaded! Manufacturer: Transnorm Year of construction: 2001 Type: 1600-105 Nominal angle: 45 degrees Nominal belt / belt width: 80cm Belt type: KT 94 Nominal radius: 700mm width: approx. 95cm distance: outside / outside: approx. 2,10m inside / inside: approx. 0,83m SEW Motor Djdpjfyn Iqjfx Aqvokn

Condition: used, Colour: Grey Fensterpresse Dkjdpfx Aqjx Svw Nsvon Orma Max. 4000x2700mm 380V, 2,2kW - Documentation available: No - CE certificate present: No - Max. workpiece width [mm]: 4000 - Max. workpiece height [mm]: 2700 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2002, Empty weight: 75 kg - Year: 2002 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 991 - Voltage [V]: 230 - Current consumption [A]: 0.07 Dksdpfxowtx Umo Aqvon - Power [kW]: 0.1 - Transport weight [kg]: 75kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, functionality: fully functional, Year of construction: 2006, machine/vehicle number: 8000S000, overall weight: 1,370 kg, total height: 1,360 mm, total length: 4,150 mm, total width: 580 mm, load capacity: 10,000 kg, Equipment: documentation/manual, Adjustable Crane manual available. Dkedpfx Aqey Tqbrovjn

Year of construction: 2022, condition: excellent (used), Crane spreader beam, Wewira, 3 tons - second-hand : Dksdpfx Aqeq Tqm Tevon Price ex location: 6.500.-€ (net)! Manufacturer: Wewira Type: Equalizing spreader beam Year of construction: 2022 6.000mm 6 hooks Load capacity: 3.000kg New price, 7.800.-€ (net) Condition: very good - basically unused! - Classic bad buy! Is currently only a little dusty! Available: immediately Location: 79206 Breisach am Rhein

Condition: used, 5tSWF Krantechnik GmbH Dkedpfxedc A R Ts Aqvon

Year of construction: 1992, condition: used, Technical details: lifting capacity: 12,5 t span width: 9000 mm stroke speed: 5 / 0,8 m/min rope diameter: 14 mm lifting height max. hook position: 10.000 m total power requirement: 13,6 kW weight of the machine ca.: 5,2 t dimensions L x W x H: Brücke: ca. 10,3 x 2,2 x 2,3 (3,15to) m dimensions L x W x H: Laufträger Nr.1: ca. 4,38 x 0,8 x 0,7 (1,01to) m Dkedpjvbh Rhjfx Aqvon dimensions L x W x H: Laufträger Nr.2: ca. 4,38 x 0,8 x 0,7 (0,99to) m dimensions L x W x H: Pal. Zubehör ca. 4,2 x 0,8 x 0,4 (0,16to) m Crane classification according to DIN 15018H2B3 Crane trolley: DEMAG type RF 400; type KBF 100 A8/2, travelling speed 12.5 / 50 m/min., size of travel wheels Ø 200mm (16 pcs.) Main hoist trolley EKDH 532 H20 KV3-4/1 F6; type KBF 90 A8/2, travelling speed 5 / 20 m/min., size of travel wheels Ø 160mm (4 pieces) DEMAG DH5 32 hoist; lifting height 10,000 mm; braked with sliding carriage; main lifting speed 5 / 0.8 m/min. Single hook size 5 with rope safety device Rope Ø 14mm; rope length 46 metres; drive unit group 1Bm Bridge Hoisting gear Trolley/crab Wireless remote control and conventional control *

Condition: used, Technical details: Dkodou Nlqfopfx Aqven throat min.: 2600 mm throat max.: 4200 mm Support arm position: 360 schwenkbar / swiveable ° weight of the machine ca.: ca. 1,5 t Welding stand for positioning of a welding torch / welding source on big work pieces - diameter of frame = 1480mm - all adjustments have to be proceeded manually On sale without welding source. i.D. *

Condition: used, Technical details: throat min.: 2600 mm throat max.: 4200 mm Support arm position: 360 schwenkbar ° weight of the machine ca.: ca. 1,75 t dimensions L x W x H: L:5,0xB:1,6xH:2,8 m space requirements of the machine approx.: 6,61x1,4x2,8 m WELDING STATIVE for positioning a welding torch/welding source on large wide workpieces. - The device for adjusting the gas cylinder is integrated in the frame. - Dm of the base frame = 1480mm - All adjustments are made manually. - With welding device Make: KOLBE; Type: SC 400 - 400A; protection P21; cooling E; input 380V/21kVA; welding 400V / 34V; water cooled; - Welding steps: 3x coarse and 12x fine - feeding device (removable) with 13,5m cable to the welding device - Hose package water cooled (4,0Meter) Djdpfxeu Nwyre Aqvskn *

Condition: used, Year of construction: 1992, Technical details: Dksdpfsu Nvgdjx Aqvsn lifting capacity : 2,0 t lifting height max. hook position: 2,3 m travel of hook: max. 3000 mm wheel base: 520 mm total power requirement: 2,3 kW Crane with carrier and electric rails: -double - T - beam 200 x 200mm, length approx. 10.100mm, travel 9.000,00 mm -Steel lifting gear, load capacity 2000kg, lifting class DIN 15018, lifting speed 0.80 / 5 m/min, lifting height 3 m, travel speed 10 / 2.5 m/min, track 200mm, axle distance 520mm, Chain hoist, hook -Pendant control panel Pendant station -div. mounting holes *

Condition: used, Hydr. swing cut guillotine shears HERA type HSS III No. 598 Year of manufacture 1986 Cutting length 3100 mm Cutting thickness 3 mm Stand projection 200 mm Blade strokes 25 strokes/min. Mains connection 380 Volt, 50 Hz Motor power 3 kW - Motorized adjustable backgauge 1070 mm - Actual value digital display for the backgauge - Cutting gap adjustment Dksdpjq A I Upofx Aqven - Cutting length adjustment - Front side stop left 1000 mm - 4 sheet metal support arms 1000 mm - el. foot switch Space requirement without sheet support arms L x W x H 3630 x 2200 x 1600 mm Weight approx. 4000 kg good condition

Condition: used, Specifications: Composed of 2 motorized 90° curved conveyors. Curve radius: 3 m at axis. Total deployed length: 4.80 m. Overall conveyor structure width: 750 mm. Varnished beechwood slats: 620 x 54 x 42 mm. Dsdjx Sx Iqjpfx Aqvskn Adjustable height from floor: 500–650 mm. Driven by chains and sprockets. Lateral guidance and lower return via slide rails made of synthetic material. Integrated drive gearmotor. Contactor-disconnector box. Emergency stop and isolator. Control cabinet with electronic frequency inverter operating both curved belts.

Condition: reconditioned (used), Year of construction: 2005, MACHINING CAPABILITIES: - Mortise 30x30 mm, Max depth 150 mm - Vertical travel (Z axis) max 300 mm Adjustable via stops - Transversal adjustment (Y axis) max 300 mm (290 mm with fence) Front and handwheel adjustment - Longitudinal adjustment (X axis) max 300 mm Djdjx Rz Dxspfx Aqvskn Manual with pneumatic clamping MACHINE CONFIGURATION: - Welded steel frame - 2m support table, 40cm support rollers Fence stop guide 2000 x h.110 mm 2 pneumatic workpiece clamps Working height 1m (adjustable) - Automatic lubrication unit per cycle OTHER CHARACTERISTICS: - Power supply 400V, 50Hz, Three-phase N+T, IN 16A - Installed power 3 kW - Dust extraction: 1 top port Ø95mm ext. for Ø100mm hose - Required pneumatic supply 7 bar - CE marking, lockable main switch - Overall dimensions (LxWxH): 2.10x1.10xh.2.20m - Weight 350kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, For sale is a high-quality, adjustable beam traverse/crane traverse from the brand LOADLIMIT. This traverse is ideal for safely lifting and transporting long or bulky loads with a crane or forklift. Dsdpjy U Idaofx Aqvokn The adjustable design allows the traverse to be flexibly adapted to different load widths. Very robust industrial design in near-new condition. Technical data: Manufacturer: LOADLIMIT Type: TBV 3.0-3500-1700 Year of manufacture: 2021 Load capacity: 3000 kg Adjustment range: 1700-3500 mm Weight: 137 kg CE version. Condition: Used, very good condition, ready for immediate use. Pick-up only. No guarantee or warranty.

Condition: used, Year of construction: 2004, functionality: fully functional, motor manufacturer: SEW, Equipment: type plate available, Curved Belt Conveyor, Conveyor Belt Curves, Belt Curve 45 Degrees with Drive Manufacturer: Transnorm Year of manufacture: 2020 Condition: used Model/Type: TS 1600-105/45Degree Total external length: approx. 1200 mm Total internal length: approx. 540 mm Total width incl. motor: 1100 mm Conveyor width / belt width: approx. 700 mm Belt type: smooth belt, KT58-smooth Including support legs Including SEW motor with Movimot unit 1.1 kW, 2900/393 rpm Stock quantity: 3 units Price: per unit Internal item number: 2026032306 Conveyor technology – reliable and ready for immediate use The conveyor system offered here was in continuous operation up until dismantling and is fully functional. Features: • Condition: fully functional, with normal signs of use • Ideal for efficient and fast material handling • Properly dismantled and packaged for safe transport Collection address: Industriestraße 5, 47918 Tönisvorst Thanks to high-quality workmanship, this conveyor system ensures smooth and gentle material flow – even under heavy loads. Dkjdpfx Aeywwc Dsqven Tailor-made solutions for your intralogistics Whether roller conveyors, belt conveyors, incline conveyors, or telescopic conveyors for loading and unloading – we are your competent partner. We are happy to assist you with the planning, design, and implementation of customized solutions. Upon request, we will provide you with a tailored offer. Simply let us know your requirements and site conditions. Benefit from our many years of experience and our strong network of specialists. We successfully realize projects for a wide range of industries, including: • Logistics • Pharmaceutical industry • Trades • Electronics sector Together, we develop economical and sustainable solutions to optimize your material flow. We also provide comprehensive support in automated sorting technology and complementary systems such as pick racks or container solutions.

Condition: used, Year of construction: 2020, functionality: fully functional, motor manufacturer: SEW, Equipment: documentation/manual, type plate available, Curve belt conveyor, belt curve conveyors, 90-degree belt curve with drive Dodpfx Aqoywvr Dsvokn Manufacturer: Transnorm Year of manufacture: 2020 Condition: used Model/Type: TS 1600-090/90 Degree Overall outer length: approx. 1850 mm Overall inner length: approx. 760 mm Dimensions: RN: 600, BN : 600, WN: 60 deg Conveying width: approx. 600 mm Belt type: belt with fabric reinforcement Including 200 mm high side guides Including SEW motor with Movimot version, 1.1 kW, 2900/504 rpm Internal article number: 2026032305 Conveyor technology – reliable and ready for immediate use – The conveyor system offered was in continuous operation until dismantling and is fully functional. Features: • Condition: fully functional, with normal signs of wear • Ideal for efficient and fast material handling • Professionally dismantled and securely packaged for transport Pick-up address: Industriestraße 5, 47918 Tönisvorst Thanks to its high-quality workmanship, the conveyor technology ensures a consistent and gentle flow of materials—even under heavy loads. Tailored solutions for your intralogistics Whether roller conveyors, belt conveyors, incline conveyors, or telescopic conveyors for loading and unloading—we are your competent partner. We are happy to assist you with the planning, design, and implementation of customized solutions. Upon request, we will provide you with a tailor-made offer. Simply let us know your requirements and site conditions. Benefit from our many years of experience and strong network of specialists. We successfully realize projects for a wide range of industries, including: • Logistics • Pharmaceutical industry • Crafts and trades • Electronics sector Together, we develop economical and sustainable solutions to optimize your material flow. We also offer comprehensive support for automated sorting technology and complementary systems such as order picking racks or container solutions.

Condition: good (used), Year of construction: 2011, Hinged belt conveyor curve, driven – used – Price ex location: €950 (net), dismantled, packed, and loaded! Manufacturer: Röwe Model: APSB106M Year of manufacture: 2011 Dsdpox Ea Agsfx Aqvekn Hinged belt width: approx. 30 cm Overall width: approx. 35 cm WA 80695 Conveying speed: 10-50 m/min Power: 0.55 kW Condition: good Available: immediately Location: Warehouse Frankenberg / Saxony

Year of construction: 2010, condition: good (used), approx. 15 pieces Transnorm conveyor curve 45 degrees - used - : Price per piece: 950.-€ (net), disassembled and loaded! Manufacturer: Transnorm year of construction: 2010 type: 1600-105 Nominal angle: 45 degrees Nominal belt width: 800mm Belt type: KT 96 Nominal radius: 900mm SEW engine Condition: good Available: immediately Location: Stock Frankenberg Dkodpogxirljfx Aqvon

Condition: used, Year of construction: 2015, Transnorm curved belt conveyor left bend 90°-800-700 IR900 RA2116 Technical data: Manufacturer: Transnorm Condition: good (used) conveying angle: 90° nominal/external width (NB): 800 mm belt width (GB): 700 mm innerradius (IR): 900 mm Dedpfsq Uap Rox Aqvokn overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor, SA37/T DT71D4/TH Electrical Data: 380-500 V, 0,37 kW Conveying speed: 0,67 m/s Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Frequency converter for stepless speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: new, Year of construction: 2021, Transnorm belt curve conveyor right 30°-1270-1100-IR900 RA2302 Technical data: Frame width (NB): 1270 mm Frame width with Bearing cover: 1390 mm Frame width with Bearing cover and gearbox: 1480 mm belt width (GuB): 1100 mm height (BH): 250 mm height motor below: 300 mm height including motor (MH): 550 mm Inner radius (IR): 1200 mm Conveying angle: 30° degrees middler conveying speed (v m/s): 1,4 m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 1,5 / S1 Belt: KT 96 new Year of construction: 2021 Height Sideguides: 194 mm Djdpfet D R R Ejx Aqvokn Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2005, Dematic roller curve left 90°-500-440 IR795 RA2351 Make: Dematic Running direction: 90° left running Roller width (RB): 440 mm conical, plastic coating Nominal/outer width (NB): 500 mm Inner radius (IR): 795 mm 3x 300-500V Height frame: 132 Height including motor: 275 Dsdevu Ihyspfx Aqvskn Gear motor: SEW WF20 DT71D4/Z/MM03/BW1 Conveyor speed: 0.6 m/s Optionally available supports side guides Frequency inverter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics