Used Band Resaw for sale (4,221)

Year of construction: 2005, condition: ready for operation (used), A single-sided IMA edge processing machine for sizing, edge bonding and post-processing of wood panels is available. Min. workpiece dimensions X/Y/Z: 150mm/130mm/16mm, max. workpiece dimensions X/Y/Z: 2350mm/800mm/40mm, max. workpiece weight: 50kg, workpiece angle: 90°, material: particleboard/MDF, working height: 960mm. This is a complete system with conveying and peripheral units. Documentation available. An on-site inspection is possible. Kdjdpfx Aozidi Sjdqsr

Condition: ready for operation (used), Year of construction: 2015, operating hours: 5,842 h, A film banding machine with shrink wrapper Meurer packaging machines is available. Banding capacity: 35 products/min, bundle capacity range: 1x5/1x10, product dimensions X/Y/Z min./max.: 120mm x 120mm x 70mm / 265mm x 125mm x 38mm, bundle dimensions X/Y/Z min./max.: 228mm x 265mm x 125mm / 350mm x 120mm x 120mm. Machine dimensions X/Y: approx. 3300mm/3020mm, operating hours: approx. 5842h. Documentation available. On-site inspection is possible. Kdsdpfxevmq Tpo Adqer

Year of construction: 2018, condition: ready for operation (used), Working width: 707mm, working height inlet/outlet: 1220mm/1100mm, working temperature: 60°C, material: stainless steel, belt material: plastic, belt length and width bottom: 14000mm/820mm, belt length and width top: 8500mm/820mm, reducer power: 1.5kW, pump power: 2.2kW, additional bridge reducer power: 0.55kW, machine dimensions X/Y/Z: approx. 6750mm/1810mm/3500mm. Documentation available. On-site inspection is possible. Kodpfx Adeu S I Hfsqjdr

Year of construction: 2017, condition: ready for operation (used), Flywheel diameter: 700mm, worktable dimensions: 694x1010mm, cutting capacity: 430x680mm, flywheel width: 40mm, band speed: 2800/min, flywheel speed: 782/min, saw band length: 5040-5190mm, motor power: 4HP, connected load: 3kW, noise level: 82 dB(A), net weight: 375kg. An on-site inspection is possible. Kedpfew S Tytjx Adqsdr

Year of construction: 2014, condition: ready for operation (used), An automatic Kasto horizontal band saw is available. Cutting diameter: 330mm, Cutting capacity X/Y: 330mm/350mm, Material feed length: 500mm, Min. cut-off length: 10mm, Min. cutting diameter: 10mm, Min. remnant length (automatic mode): 60mm, Cutting speed: 150m/min, Saw blade dimensions X/Y/Z: 5090mm/41mm/1.3mm, Material support height: 700mm. Machine dimensions X/Y/Z: approx. 1350mm/2400mm/1850mm, Weight: approx. 2200kg. Documentation available. An on-site inspection is possible. Expected to be available starting August, 2026. Kdsdpfx Aezipfxedqsr

Year of construction: 1997, condition: ready for operation (used), A very well-maintained Forte horizontal band saw is available. Round cutting capacity: 320mm, max. square cutting capacity: 300mm/300mm, saw blade dimensions X/Y/Z: 3660mm/25mm/0.9mm, band speed: 100m/min, max. material feed: 400mm, max. feed length: 4000mm. Machine dimensions X/Y/Z: approx. 1950mm/1500mm/1250mm, weight: approx. 1000kg. Including roller conveyor. The machine was used in a training workshop and is in good condition. Including five bandsaws. Documentation vorhanden. An on-site inspection is possible. Kodpjzka Iyofx Adqsdr

Year of construction: 2006, condition: ready for operation (used), Glue type: PUR glue, glue application system: cartridges, max. edge thickness: 25mm, max. workpiece thickness: 60mm, feed rate: 16m/min, min. workpiece length: 140mm, min. workpiece width: 60mm. Including various spare parts and Ligmatec return. Documentation available. On-site inspection is possible. Kdsdpfjugmw Eox Adqor

Year of construction: 2013, condition: ready for operation (used), Saw blade dimensions: 41mm x 5100mm, max. cutting diameter: 350mm, dimensions X/Y/Z: 4400mm/1800mm/2000mm, weight: approx. 2400kg. Kdjdpfetufcajx Adqjr

Year of construction: 2005, condition: ready for operation (used), A hydraulically operated high-performance bandsaw with two-column guide and full enclosure. Cutting range: 260×260mm, cutting speed: 20–110m/min (infinitely variable), weight: approx. 1700kg. Machine dimensions: approx. 1800×2200×1600mm. An inspection can be arranged by appointment. Kdodjxtpq Aopfx Adqor

Condition: ready for operation (used), Cutting range round 90°/30°: 320mm/250mm, cutting range square 90°/30°: 320mm/240mm, max. profile capacity: 500mm/320mm, max. workpiece height: 320mm, throat depth: 520mm, saw band dimensions X/Y/Z: 4600mm/32mm/1.1mm, band speed: 96m/min. Machine dimensions X/Y/Z: approx. 2200mm/1400mm/1400mm, weight: approx. 800kg. An on-site inspection is possible. Kodpfxsw U Uamj Adqjdr

Year of construction: 2011, condition: ready for operation (used), A fully automatic band saw is offered. Band length: 4240mm, saw band dimensions X/Y/Z: 4240mm/34mm/1.1mm, cutting capacity: approx. 320mm, square cutting capacity X/Y: 320mm/320mm, cutting speed: 15m/min - 100m/min. Equipped with CNC control, fully automatic material feed, hydraulic saw band tensioning, integrated coolant system, chip conveyor, bundle clamping device. Machine weight: approx. 1650kg, machine dimensions X/Y/Z: approx. 2250mm/2100mm/1500mm. Inspection possible by arrangement. Kdedpfxsy Taunj Adqsr

Year of construction: 2004, condition: ready for operation (used), Wheel diameter: 600mm, working height: 955mm, max. cutting height: 140mm, clearance height: approx. 5mm-300mm, clearance width: max. approx. 650mm, max. saw blade length: 5600mm, saw blade width: 8mm-25mm, max. saw blade thickness: 0.65mm, max. band speed: 1640m/min, conveyor belt speed: 0,5m/min - 5m/min, conveyor belt width: 650mm. Overall length with conveyor belt: 2820mm, overall width: 2550mm, overall height: 1800mm, machine weight: approx. 700kg. Documentation available. Inspection possible by arrangement. Kedszuktnopfx Adqsdr

Condition: like new (used), Year of construction: 1999, machine/vehicle number: B4361, AGAZZANI band saw, model 700 Wheel diameter: 700 mm Cutting height: 405 mm Cutting width: 680 mm Blade speed: 1570 RPM Kdodpfx Adezq Akkoqsr Rotation speed: 715 RPM Dimensions: 1290 x 730 x 2270 mm Weight: 400 kg Supply voltage: 400 V Power: 3 kW Available for viewing in the ARDENNES region.

Condition: used, Year of construction: 2007, functionality: fully functional, used horizontal ZENZ block bandsaw type BN 110 S, stationary Kodpfx Adowlfdxoqjdr Year of manufacture: 2007; completely overhauled in 2022 Conveying technology year: 2022 Serial number: 141-8300 Equipment: • 22 kW drive motor • 7 m cutting length • 5 vertical supports • 2 log turners (+2 holders) • Log lifting preparation with frame • 4 level compensators with claws (+2 holders) • 1 log roller • 1 new pre-cutter • PLC control including cutting program • Seat mounted on armrests • Left: PLC - Right: joystick • 1 Zenz automatic sharpening machine type AHB (serial no.: S-1012) • 4 bandsaw blades 6000x100x1.1 stellite for softwood (prod. no.: AB 0) • 4 bandsaw blades 6000x100x1.1 stellite for hardwood (prod. no.: AB 0) • Water cooling with 20 l tank and nozzle o Mounted on blade guide • Log lifting system o With 3 log lifting arms o With 2 cylinders • Log lifter preparation in frame o With control unit o Mount for pipe o Two mounts for cylinders • Hydraulic frame ejector for 820 mm • Green horizontal laser indicator Mechanisation consisting of: • Hydraulic folding frame for offloading at the saw with electrically driven roller conveyor • Electrically driven roller conveyor with hydraulic ejectors o Both roller conveyors operate simultaneously • Roller table 4 m long – slightly inclined with stop o All electric and hydraulic elements operable from the operator’s station The block bandsaw including conveyor technology is fully operational.

Condition: refurbished (used), Year of construction: 1975, functionality: fully functional, CANALI Vertical Automatic High-Performance Block Bandsaw Model BBS.V "PACIFIC" K/L-B-P 1800, Type 555, Year 1975 with control panel in the cabin, Bandsaw wheels Ø 1800 mm, bandsaw wheel width 280 mm, Max. saw blade width 310 mm, bandsaw blade length 11,500 mm Log feeding system, approx. 20 m long, four-strand with inserter Block carriage with ejector onto block cross conveyor CANALI pneumatic clamping carriage, Type 501.09 with 4 clamping jaws, 3 log turners, 4 ejectors, Drive power 100 kW, carriage speed 5-120 m/min. Kjdpoxvrnijfx Adqjdr Powered roller bed with slab extraction with brush, lifter with puller for end trimming Electrical switchgear cabinets complete Complete sharpening room equipment for bandsaw blades

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, power: 1.5 kW (2.04 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 350 mm, cutting width (max.): 520 mm, control type: manual, roller diameter: 540 mm, pivoting range: 15 °, actuation type: manual, rotational speed (max.): 950 rpm, total height: 1,970 mm, total length: 870 mm, total width: 620 mm, overall weight: 234 kg, table height: 840 mm, Equipment: documentation/manual, motor brake, • Heavy-duty design with high weight for maximum smooth operation • Cast-iron flywheels with rubber coating and cleaning brush • 3-roller precision saw blade guide as standard, located at the top and bottom • Large cast-iron saw table, swiveling from 0° to +15° with a ground and polished surface Kdodjzvd Egjpfx Adqsr • Precise cutting height adjustment via rack and pinion with millimeter scale • Particularly quiet and precise operation thanks to the torsion-resistant machine housing • Large cast-iron parallel guide with round bar guide, easily adjustable • Saw blade tension indicator • Self-braking motor

Condition: used, Year of construction: 2016, Industrial automatic edge banding machine SOLUTION XD KEY FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: A SINGLE "TOUCH" IS ALL IT TAKES TO OPERATE THE MACHINE STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE EDGE BANDING OF ROLL MATERIAL, STRIP EDGES AND SOLID WOOD EDGES GENERAL FEATURES Single-sided edge banding machine in left-hand version for edge banding of roll material and strip edges with all conventional hot melt adhesives. The base frame consists of a stable steel welded frame with higher rigidity, which provides optimal support for the installation of the processing units. The upper pressure beam consists of a thick-walled steel profile and a double trapezoidal drive belt, which is automatically positioned according to the panel thickness. Height adjustment with display on the upper pressure beam and on the operator panel. Manual workpiece feeding system with a large-sized work area and increased support surface facilitates the feeding of large workpieces. Adjustable infeed fence for two positions with automatic selection for processing with or without a pre-milling unit. Upper working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal support for precise referencing to the panel. All high-frequency motors are operated via frequency inverters. Each unit is equipped with its own inverter for optimal flexibility and improved machine production times. Protective hood for all units positioned after the glue application unit. Polycarbonate windows ensure a good view of the units during processing. Interior lighting of the hood. Protective hood with sound-absorbing material for lower noise emissions during operation. Spacer on the infeed fence allows the machine to be fed with the correct spacing. The spacing is automatically adjusted to the selected feed rate. Dust extraction port arranged on the pivoting control panel, positioned in the infeed area, is adjustable for ergonomic operation. The electrical system complies with current regulations. Electrical components are housed in a metal housing, attached to the machine frame and equipped with doors for easy access in case of maintenance. Standard voltage is 400 V EU 50 Hz (with neutral conductor). Material feed is via a feed chain with 80 mm wide chain plates made of rubberized nylon, for optimal guidance and high load capacity. The chain slides on 2 guides made of hardened and ground steel, one round and one flat guide, to guarantee straight feed and to protect against lateral displacement. Automatic chain lubrication. The amount of lubricating oil is optimized by the control system depending on the panels being processed. External support roller track positioned along the entire length of the machine; consisting of an extendable opening system up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCH PC control system for quick and easy execution of the main functions of the machine. Includes: – Processing of programs in Just in Time mode – Possibility of management via bills of materials – Possibility of management by Kdodpfx Adoxy Tm Ieqor

Condition: used, Year of construction: 1980, Roll diameter: 600 mm Cutting height: 385 mm Motor power: 2.2 kW Table tiltable Table size: 540 x 600 mm Total height: 2100 mm Weight: approx. 260 kg Storage location: Nattheim Kdjdpfx Aew D Aybedqer

Condition: used, Year of construction: 1992, Wheel diameter: 500 mm Band guidance above and below Tilting table Location: Nattheim Kedpfxjw D Aw Hs Adqjdr

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Cast construction, doors with safety interlocking; coating of conveyor rollers in very good condition; outreach 500 mm; emergency stop (NOT-AUS); Kdedpfxjzu Im Se Adqer

Condition: good (used), Year of construction: 1982, Cutting capacity 90° round 320 mm square 320 x 320 mm rectangular 540 x 200 mm Cutting capacity 45° round 175 mm square 175 x 175 mm rectangular 150 x 270 mm Main motor 1.5 kW Cutting speed, stepless 17 - 120 m/min Saw blade size 3660 x 27 x 0.9 mm Dimensions L x W x H 1900 x 1000 x 1200 mm Net weight 410 kg Accessories / Special Features: • Semi-automatic version • Raising and lowering of the saw frame • Hydraulic saw pressure regulation • Hydraulic material clamping • Automatic opening and closing of the clamping jaws • Cutting speed steplessly adjustable between 17 - 120 m/min • Automatic cutting pressure regulation • Material stop length 500 mm • Coolant system • Mitre swiveling device: The entire machine can be easily and quickly swiveled steplessly The workpiece clamping cylinder and the cutting pressure regulator have been newly resealed by us. Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 Kodpfxoxztfao Adqjdr DE - 44143 Dortmund - Wambel

Condition: excellent (used), Year of construction: 2022, machine/vehicle number: AE0454, functionality: fully functional, Working area: Kdodpjztbt Nefx Adqor Round material: 460 mm Square material: 460 x 460 mm Band speed: 16 - 120 m/min Motor: 4 kW Blade size: 5730 x 41 x 1.3 mm Machine weight: 3,000 kg Machine dimensions: L=2,800, W=2,400, H=2,100 mm

Condition: used, Bandsaw Metabo BS260 Swift, year 2006, in very good condition, 260 W, 230 V, 1712 mm band length, 40 kg. Ksdpfx Aex H Uh Njdqjdr Price changes reserved, subject to errors, printing and typographical mistakes.

Condition: used, Year of construction: 2009, Bi-Matic Dynamic 4.5.S.7 (year of manufacture 2009): Dimensions of processed material: Edge thickness: 0.4 – 3.0 mm (in coils), up to 5 mm (in strips). Part thickness (panels): 8 – 50 mm. Minimum part width: 60 mm. Minimum part length: 90 mm. Operating parameters: Working feed speed: 7 m/min (constant speed of the feed belt). Working air pressure: 6 bar. Adhesive heating time: approx. 5–6 minutes (Teflon bath). Kdodpfxszvfdwj Adqer Automatic edge banding machine, application zone, pressing zone, single-motor edging on THK guides, tilting milling unit, radius cutter, brushes. The machine is still in operation. Available for immediate pickup.

Condition: excellent (used), Year of construction: 2014, Cutting capacity, circular: 255 mm Cutting capacity, rectangular: 315 x 230 mm Cutting capacity, square: 230 mm Cutting capacity, miter cut at 45° circular: 160 mm Saw blade dimensions: 27 x 0.9 x 2750 mm Saw blade speed, continuously adjustable: 20 - 90 m/min Saw blade drive: 400 V, 1.5 kW Space requirement: 1800 x 1600 x approx. 1800 mm Weight: 380 kg Kedpsznh Nmofx Adqjdr