Used Automatic Feeder for sale (24,400)

Condition: new, Model Name Iijdpfxegvkafs Aacjh Shark 332-1 SXI evo

Condition: used, machine/vehicle number: 007569, Max. panel width: 2200 mm Max. panel length: 4500 mm Main saw blade projection: 152 mm No of Grippers: 11 Isdpfx Aaevrrldjcjih Thin sheet loading: yes

Condition: good (used), Year of construction: 1998, functionality: fully functional, BMSO Fully Automatic Band Saw Cutting capacity (round material): up to Ø 250 mm Cutting capacity (flat material): up to 300 mm Automatic material feed: The machine automatically feeds the material to the set length and cuts the pre-set number of pieces. Weight: approx. 600 kg Dimensions (L × W × H): 2000 × 1050 × 1500 mm Financial information VAT/margin: Margin: The listed price includes VAT (VAT not deductible for businesses) Iiodpfexmbdbsx Aaceh

Condition: good (used), Year of construction: 2019, machine/vehicle number: XD-38II-CP-0703-H, turning diameter over cross slide: 38 mm, spindle speed (max.): 6,500 rpm, turning diameter: 38 mm, spindle bore: 39 mm, power: 7.5 kW (10.20 HP), The machine can be viewed at our Immendingen site after consultation. Iijdpevtmalofx Aacjh Included is the original chip conveyor and a bar loading magazine from FMB 3-36 turbo Includes Büchele SFB-301 high-pressure system 150 bar 4 valves

Condition: used, functionality: fully functional, max. envelope size 36 x 36 cm max. speed 15000 /h Envelope feeder Schneider SF-80 Iiedpfxov S Iuns Aaceh Can be used on single-sheet or stream feeders Format max. 360 x 360 mm Format min. 100 x 100 mm Speed max. up to 15,000 cycles/hour Incl. height-adjustable delivery belt

Condition: used, Vibratory bowl feeder / sorting device / bowl feeder / vibratory feeder RNA Vibratory bowl feeder, sorting device / screw feeder with vibratory feeder for screwdriving technology Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Type SRC-B200-2R Iedpfx Aju Ailgjaceih Year of manufacture: approx. 2000 Pot diameter top: 300 mm Bowl diameter bottom: 180 mm Inner height of bowl: approx. 45 mm Sorting track width: approx. 5 mm Total height (drive + bowl with sorting track): 260 mm Mains connection: 230 Volt, 50 Hz. - Control unit RNA, type ESG 90 for adjustable vibration speed - The conveyor was used to feed automotive fuses Space requirement Ø x H: 300 x 260 mm Weight: 14 kg good condition A bowl feeder always consists of two main components. 1) Sorting bowl, in which the parts are aligned 2) Drive, which generates vibrations in the sorting bowl through mechanical oscillations and thus sets the parts in motion.

Condition: new, Model Name Isdpfxsgvkcto Aaceih Shark 282 SXI evo

Condition: used, machine/vehicle number: 007829, Position 1: Front-Loading Panel Saws SCHELLING-FH 4 430/220-P Iijdowu Ahgspfx Aacjh Position 2: Automated Warehouse SCHELLING-FH 4 430/220-P

Condition: good (used), functionality: fully functional, BOMAR STG 320 GA Fully automatic bandsaw machine Cutting capacity 90° diameter 320mm, flat 510x320mm 45° diameter 320mm, flat 310x310mm 30° diameter 230mm, flat 210x210mm Continuously adjustable forced hydraulic sawing pressure Automatic cutting pressure compensation Feed clamp stroke of 600mm Entry of up to 99 different lengths and quantities via keypad Hydraulic material clamps (clamp moves full stroke) Separate coolant unit Continuously variable sawing speed 20-90 m/min, digitally displayed Machine dimensions 2400x1800x1800mm Iedpfx Aaexmba Ascoih Machine weight 1300kg Year of manufacture 2001 Financial information VAT/margin: Margin: The displayed price includes VAT (VAT is not deductible for businesses)

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, feed length X-axis: 4,000 mm, feed length Y-axis: 5,200 mm, feed rate X-axis: 35 m/min, working width: 400 mm, saw blade diameter: 450 mm, input voltage: 400 V, EXPORT automatic crosscut saw feeding length 4,000 mm saw blade Ø450 mm cutting width 400 mm cutting height 120 mm 9.5 kW saw motor 1.5 kW feed servo motor Iiodpfx Aaew Adndjcsh infeed table 5,200 mm outfeed 3,000 mm For more information, please contact us, preferably by phone.

Year of construction: 1990, condition: used, saw blade diameter 250 mm cutting diameter 50 mm revolutions per minute 27/54 U/min output 1,5 kw dimensions 1,4 x 0,75 x 1,3 m weight of the machine ca. 0,6 kg Used automatic cold circular saw Iijdpon Hbtwefx Aacsh - 3m roller conveyor - man. lenght stop - Blade hole Ø 32 mm - coolant system - 16 A

Condition: excellent (used), Poly-Clip DFC 8162 Automatic Double-Clipper. can fit most vacuum fillers. Suitable for large calibres up to 180mm, Iodpfx Aaexbxxrecoih

Condition: ready for operation (used), functionality: fully functional, saw band length: 4,100 mm, saw band width: 27 mm, workpiece weight (max.): 250 kg, section length (max.): 400 mm, empty load weight: 1,500 kg, No minimum price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates the buyer to collect the machine on schedule between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Saw blade length: 4,100 mm Saw blade width: 27 mm Saw blade thickness: 0.9 mm Cutting speed: up to 75 mm/min Max. cutting length: 400 mm Max. material weight: 250 kg Iedpoxm Rlzefx Aaceih Saw feed: hydraulic Lowering speed: 0–250 mm/min MACHINE DETAILS Saw blade drive: 2.2 kW Hydraulic unit: 0.37 kW Coolant pump: 0.12 kW Total power requirement: min. 2.7 kW Dimensions & Weight Dimensions (L x W x H): 2,400 x 2,300 x 1,700 mm Weight (net): 1,500 kg

Condition: used, This RAIM 22 AT4 automatic band saw is being auctioned online in our industrial/machinery auction INSOLVENCY AUCTION RAiN Treppenbau GmbH – Machinery, transporters, tool equipment. Iiedoxpcvqjpfx Aacsh

Condition: good (used), Cutting capacity: 250 mm round, 250 mm x 250 mm rectangular. Blade size: 3505 mm x 27 mm x 0.9 mm. Blade speed: 27, 40, 58, 80, 115 m/min, powered by a 3.7 kW motor. Working load: 1,500 kg maximum. Technical data Iiodpfx Aaov Sk Ikscoh

Condition: new, Steel Frame Automatic Nailing Bridge A fully automatic nailing station for nailing or stapling sheet materials in accordance with the design specifications including the following functions: ​ Iodpsdzc Rxofx Aacoih 1. Nailing or stapling of sheeting 2. Routing of openings or overhangs 3. Application of breather membrane 4. Nailing or stapling of battens ​ Specification Full PC control with 17” touch screen Interactive display of operation being performed Automatic download from drawing software. Heavy duty tables with one fixed side and one moving side 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished 1300mm minimum panel height Maximum panel height up to 3.5m (optionally extendable) Maximum panel length 6m – optionally up to 13m 400mm wide heavy duty work tables 825mm working height 300mm maximum panel thickness (optionally 5000mm) Motorised table opening with automatic brake locking Bridge mounted with one nailing / stapling tool mounting as standard. (Options for 2 or 3 nailing tool mounts) Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail & Mitek. Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Optional electrically driven sheet feeding system, including automatic sheet feeding and height indexing of the support table. Optional router unit with 4kw motor - servo drive controlled Optional Equipment ​ Table with rails mounted for bridge Additional price per meter for table with rails mounted Independent rails to travel 8m over one 6m capacity table (16m of rail in total) Additional price per meter of rail Working table for holding panel 6m (no rails mounted) Additional price per meter for table Motorised chains rather than manual rollers - initial cost Price per meter for motorisation Baton positioning guiding arrangement Additional tool mount Paper roll clamp, holder and software Electric paper cutting Panel thickness of 500mm Saw blade in X, Y, Z & C axes 350mm max panel thickness Saw blade in X, Y, Z & C axis 500mm max panel thickness. Inclination of the sawblade to one fixed angle Router complete with frequency inverter, mounted on the bridge for routing out openings in the panels. Complete with software controls and dust extraction.

Condition: used, Year of construction: 1979, saw blade diameter 380 mm cutting diameter 135 mm single stroke device 700 mm power requirement 1,9 kW turning speeds 1500/3000 U/min weight of the machine ca. 1,36 t dimensions of the machine ca. 2,6 x 1,2 x 1,8 m Simple but stabil automatic Saw blade Iiodpfx Aerw Dkgjacjh - minim. coolant - 9 blades Ø 350 - 370 mm - differend cutting speed via belts - documentation

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: XZ 10480, rotational speed (max.): 3,500 rpm, Machine in working progress / 400 FCRO 32 mm / Sawing machine for the foam industry, Iiedpfow Iwaiex Aacjh Type Panda 400, M80, 1.9 kW, Year of manufacture 2014, Saw blade 400 mm, Total dimensions 1155 x 100 x 140 cm (with roller tables), Dimensions without roller tables: 71 x 100 x 140 cm.

Condition: used, Year of construction: 2000, functionality: limited functionality, Manufacturer: STAR Type: SR-20 Ijdpfx Aajxl Ridecoih Year of manufacture: 2000 with: FANUC 18i-TB control, powered tools (main side), synchron spindle, back side machining (motor defective), C-axis, chip conveyor, oil mist extractor, fire extinguishing system, bar loader magazine FMB

Condition: used, Die ZAPPE VM ist mit Ihrer kompakte Bauweise besonders für die Verpackung von CDs, DVDs, Büchern, Bilderrahmen oder anderen kompakten Gegenständen geeignet. With its compact design, the ZAPPE VM is particularly suitable for packaging CDs, DVDs, books, picture frames or other compact items. Halb-automatische Winkeleinschweißmaschine - Semi-Automatic Foil sealing machine ZAPPE VM Baujahr / Year 2010 Schweißrahmen 400 x 400mm Produkthöhe / Product high max. 230mm Foliendicke / Foil thickness 10-50 µm Leistung / Speed max. 400-1000 PCs/hour Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Iedpoxm Tx Rsfx Aacoih On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 1995, saw band length: 5,334 mm, total height: 2,130 mm, overall weight: 2,540 kg, cutting height (max.): 360 mm, space requirement width: 2,800 mm, space requirement length: 2,840 mm, power: 10 kW (13.60 HP), CONTROLS .. PLC TECHNICAL SPECIFICATION .. max. cutting height: 360 mm .. sawband length: 5334 mm .. sawband width: 41 mm .. max. bar feed (single stroke): 600 mm .. cutting speed min.: 14 m/min .. cutting speed max.: 102 m/min .. power of band drive: 5.5 kW ELECTRICAL SPECIFICATIONS Iiedpfxoxm Ryfs Aaceh .. total power consumption: 10 kW DIMENSIONS / WEIGHTS .. space requirements -left/right-: 2840 mm .. space requirements -front/back-: 2800 mm .. total height: 2130 mm .. total weight approx.: 2540 kg

Condition: good (used), Year of construction: 2001, functionality: fully functional, Fanuc control, turret with Y-axis and AGW, FMB bar feeder, chip conveyor, tool holders, including driven ones. Iiodpfx Aoxl Tkkjacsh

Condition: used, Year of construction: 2003, cutting diameter Ø 520/ 520 x 520 mm saw band length 7250 x 50 mm cutting width 1,6 mm cutting speed 16- 90 m/min Iodpfx Ajuxz Theacsih power requirement 11 kW dimensions m feed in one step 520 mm multiple feeding length 2080 mm feed speeds infinitely variable 0- 400 mm/min dimensions 4,0 x 2,8 x 2,6 m weight of the machine ca. 3,5 t Double column band saw, full automatic - Sutron BT 15 user terminal - some blades - rest pice appr. 70 mm

Year of construction: 2024, condition: new, Our KVK 1A is the almost identical sister model to the KVK 2 (MA), i.e. a semi-automatic stretch wrapper with turntable which, in comparison to the KVK 2 MA, is equipped with a cut-out for ground-level access with a hand pallet truck. The only thing that still has to be done manually with this wrapper is feeding and cutting the film. With a weight of 700 kg, this model is also designed for professional use and can be loaded up to 1500 kg. The 1A has a turntable of 1500 mm and can wrap pallets up to 2400 mm high as standard. With adjustable speeds of the turntable and film carriage, as well as an electromagnetic brake that can be very finely adjusted via potentiometer, you can adapt the automated wrapping process perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. If required, the winder can also be controlled manually. If the winder needs to be used at a different location in between, it can be easily lifted and moved with a forklift using the integrated cut-outs. Iiedpoxf Dkzefx Aacsh In addition to a photocell for detecting dark packages or black film, the wrapping height of the KVK 1A can be varied as an option (up to 3200 mm). Recommendation The KVK 1A is ideal if no ramp can be used for space reasons or if particularly heavy or unstable packaged goods are not to be pushed onto the turntable via a ramp. For further information, we have attached the technical data sheet as a PDF to this advertisement!

Year of construction: 2024, condition: new, Our KVK 3 is a semi-automatic stretch wrapper with turntable which, compared to the KVK 2 (MA), is equipped with a pre-stretch system for 250% stretch. Thanks to the pre-stretch system, you can produce up to 3.5 m of film on the pallet from 1 m of film on the roll and reduce your material consumption enormously. In addition, this system creates only minimal tension, so that even light packages are not pulled off the turntable. The only thing that still has to be done manually with this wrapper is applying and cutting the film. With a weight of 700 kg, this model is designed for loads of up to 2000 kg. The KVK 3 has a 1650 mm turntable and can wrap pallets up to 2400 mm high as standard. With adjustable speeds of the turntable and film carriage, as well as a power stretch unit adjustable via potentiometer, you can adapt the automated wrapping perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. In addition to a suitable drive-on ramp and a photocell for detecting dark packaging materials or black film, turntables in various sizes with diameters of up to 2200 mm and higher masts for a wrapping height of up to 3200 mm are optionally available for the KVK 3. Iedpfx Aoxf Dkueacoih This model is our recommendation if you wrap very light packages or if you wrap more than approx. 30 pallets per day. For further information we have attached the technical data sheet as PDF to this advertisement !