Used Automatic Straight Knife Grinder for sale (23,899)

Condition: excellent (used), Stehle S820 (automatic straight knife grinder). Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! Specification: • Maximum tool width 330 mm • Tool diameter planer heads (min-max knife heads) 120 - 230 mm • Grinding wheel speed 2850 / 5750 rpm • Possible to grind from 2 to 12 knives per head with index plate • Index plates included for 4,6,8,10 and 12 knife grinding. • Grinding wheel drive 1,3 kW • Clearance angle 10 - 35° • Coolant tank 125 L • Motor coolant pump 0,28 kW • Connection values, total 2 kW Gijdpsq Dzkuefx Af Tep Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!!

Condition: excellent (used), Year of construction: 2019, Ref: 10965 . 2019 Horizon HT-1000V Variable Trimmer Giodpfjwu Sptox Af Top ONLY 2.2m books trimmed! Inline or offline variable three-knife trimmer capable of zero make-ready on book trim size and thickness changes. Perfect for short run production, and book of one production which can be achieved through barcode driven set-up. Features: Setup automatically on the fly by reading a barcode at the entrance of the trimmer. Also capable of automatic set-up from the operator panel for same size production runs. One-to-one book production with variable sizes can be produced. Both untrimmed and trimmed sizes can be variable, for true variable format production. Can be used solo or placed in-line with Horizon perfect binders. Specification: Untrimmed Book Size: Max. Spine Length 350 x Fore-edge Length 320 mm/ 13.780” x 12.600” Limitation: Maximum length from the center to top or bottom is 175 mm/ 6.889”. Min. Spine Length 148 x Fore-edge Length 105 mm/ 5.825” x 4.130” Limitation: The minimum length from the center to top or bottom is 74 mm/ 2.91”. Trim Width: Fore-edge: Max. 110 mm/ 4.330” Min. 1 mm/ 0.04” Top and bottom: Max. 80 mm/ 3.150” Min. 1 mm/ 0.04” Trim Height: 1 to 65 mm/ 0.04” to 2.560” Production Speed: 400 to 1,000 cycles per hour (Higher production can be reached with piled books)

Condition: excellent (used), Year of construction: 2006, Type: AV250 Serial number: 06089-1 Gedpfxsyazi Ss Af Tsip Year of construction: 2006 Hole plate diameter: 250 mm Hopper: 800 litres Power: 3 x 400V, 50Hz, 78kW Dimensions: 1650 x 1700 x 2400 mm Weight: 1750 kg 3 speeds on feed screw, 2 speeds on working worm

Condition: excellent (used), Nice mixer grinder for large butchers or catering butcher, sausage/burger factory use. Gedpfx Aoxxd E Ssf Toip

Condition: excellent (used), functionality: fully functional, Mixer – automatic wolf Seydelmann ME 130 with cutting set (new stainless steel). Completely stainless steel. Giodpfx Aeyk Epwjf Tsp Option: Separator unit + separator knife + separator plate 3 mm and discharge tube – all stainless steel.

Condition: used, Year of construction: 1959, machine/vehicle number: 4651, Dreiseitenschneider - Halbautomatisch - Three-Knife-Trimmer - Semi-automatic Wohlenberg A43/30WBaujahr / Year 1959 - Serial-No. 4651 Semi-Automatic Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Gisdpeh Ax Tdefx Af Tep On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), Knife grinder MVM model K250 with tilting magnet mm 3100 long, grinding wheel motor 13,5 KW Gijdeykrzyepfx Af Tjp

Condition: used, Automatic Grinder Manufacturer: Seydelmann Model: AV 250 Completely made of stainless steel Two-speed working worm, three-speed feeding worm Giodpfxsukg Dns Af Tep Standard cutting set Electric power: 80kW Voltage: 400V 50Hz Hole plate diameter: 250 mm Hopper content: 400 liters - 1000 liters

Condition: excellent (used), Automatic circular knife grinder Göckel model RB2 Godsx Hp Rrspfx Af Tsip

Condition: excellent (used), Knife grinder MVM model K250 with tilting magnet mm 2100 long, grinding wheel motor 13,5 kW Gedpfx Afeyg Ny Es Tjip

Condition: used, Technical data: Grinding wheel diameter: 250 mm Manual feed Power supply: 380 V Total power: 1.1 kW Overall dimensions: Length: 1550 mm Width: 2000 mm Godpfxjymykbj Af Tjip Height: 2200 mm

Condition: good (used), I sell the FLEX H1212Z SIMPLE SANDLER, operational in bdb condition. Godpfxjuhm Ime Af Teip

Condition: used, Year of construction: 1983, grinding length: 710 mm, type of input current: three-phase, Automatic knife grinding machine. Max. grinding length: 710 mm. Grinding motor: 1 kW. Gisdjxytnfspfx Af Top

Condition: new, Year of construction: 2026, power: 3 kW (4.08 HP), cutting height (max.): 350 mm, cutting width (max.): 480 mm, rotational speed (max.): 100 rpm, rotational speed (min.): 80 rpm, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, CRONOSS 350 Fully Automatic Straight Cutting Band Saw Machine CRONOSS 350 is a fully automatic straight cutting band saw machine developed for serial and repetitive cutting operations. Thanks to its material feeding system and automatic stop control, it reduces operator dependency and increases production continuity. It provides reliable and stable performance in medium and high-volume metal cutting applications. Standard Features - Chip cleaning brush - Speed controller (inverter) - Hydraulic vice - Hydro-mechanical band tensioning system - 50 cm support rod - Stop system - Automatic material feeding system - Band breakage detection and stop system - 1 piece 120 cm + 1 piece 60 cm roller table - LED lighting system Technical Specifications – CRONOSS 350 Capacity 90° - Round: 350 mm - Square: 350 x 350 mm - Rectangle: 350 x 480 mm Motor & Technical Details - Main Motor: 3 kW - Hydraulic Motor: 0.37 kW - Coolant Motor: 0.09 kW - Band Saw Blade Size: 41 x 1.3 x 4680 mm - Material Feeding Height: 771 mm - Vice Max. Opening: 480 mm - Vice Max. Closing: 0 mm - Table Width: 766 mm - Dimensions (HxWxL): 1005 x 2521 x 2170 mm - Weight: 1350 kg Production & Supply Godpoynt Hxsfx Af Tjip CRONOSS 350 is manufactured in Turkey. Different automation and capacity options can be offered on request. For detailed technical information and a price quote, please contact us. Automatic Band Saw Machine Fully Automatic Band Saw Straight Cutting Band Saw Industrial Band Saw Metal Cutting Machine Steel Cutting Band Saw Hydraulic Band Saw Production Band Saw 350 mm Band Saw Automatic Steel Cutting Machine Workshop Cutting Machine Structural Steel Cutting Machine

Condition: new, Year of construction: 2026, power: 2.2 kW (2.99 HP), cutting height (max.): 300 mm, cutting width (max.): 450 mm, control type: NC control, actuation type: hydraulic, rotational speed (max.): 100 rpm, rotational speed (min.): 80 rpm, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, CRONOSS 300 Fully Automatic Straight Cut Band Saw Machine The CRONOSS 300 is a fully automatic straight-cut band saw machine designed for serial production and repetitive cutting operations. By means of its automatic material feeding system and auto-stop control, it minimizes operator intervention and ensures seamless production continuity. It offers a compact and efficient solution for metalworking shops, steel service centers, and machinery manufacturers. Standard Features Gsdpfxeyntz Ao Af Toip - Chip cleaning brush - Speed control device (Inverter) - Hydraulic vice - Hydro-mechanical blade tensioning system - 50 cm stop bar - Stop system - Automatic material feeding system - Blade breakage detection and automatic stop system - 1 x 120 cm + 1 x 60 cm roller table - LED lighting system Technical Specifications – CRONOSS 300 Capacity 90° - Round: 300 mm - Square: 300 x 300 mm - Rectangle: 300 x 450 mm Motor & Technical Details - Main Motor: 2.2 kW - Hydraulic Motor: 0.37 kW - Coolant Motor: 0.09 kW - Band Saw Blade Size: 27 x 0.9 x 3660 mm - Material Feed Height: 775 mm - Vice Max. Opening: 450 mm - Vice Max. Closing: 0 mm - Table Width: 435 mm - Dimensions (H x W x L): 1320 x 1980 x 2862 mm - Weight: 850 kg Production & Supply The CRONOSS 300 is manufactured in Turkey. Different capacity and automation options are available upon request. For detailed technical information and price quotation, please contact us. Automatic Band Saw Machine Fully Automatic Band Saw Straight Cutting Band Saw Industrial Band Saw Metal Cutting Machine Steel Cutting Band Saw Hydraulic Band Saw Production Line Band Saw 300 mm Band Saw Automatic Steel Cutting Machine Workshop Cutting Machine

Year of construction: 2014, condition: reconditioned (used), HGS 65/32 Bosch 0602208404 0 602 208 404 Straight Grinder Stabschleifer 200Hz 135V 3,3A 600W 50mm 18300 1/min 2,4kg Gijdpsfluubjfx Af Tjp some available different conditions: from almost new to used

Year of construction: 1987, condition: ready for operation (used), Knife grinders for 800 kofama lignum strips Sharpening bar 800 used 1987 Rating: Table Model: 800 Gsdeh S Upispfx Af Teip Description: 800 grinders with a slat knife

Condition: new, Year of construction: 2025, Knife grinder with tilting magnet mm 1200 long, carriage speed steplessly variable, automatic downfeed of the grinding wheel, adjustable grinding length, support for the sharpening of 4 overlapped planer knives Gijdswamkvopfx Af Tjp

Condition: new, Year of construction: 2026, saw blade diameter: 315 mm, cutting range round steel at 90°: 100 mm, warranty duration: 12 months, saw blade speed: 80 rpm, cutting range square steel at 90°: 80 mm, Equipment: documentation/manual, Fully Automatic Straight Cut Tube and Profile Sawing Machine Product Overview The fully automatic straight cut tube and profile sawing machine is designed for precise, fast, and repeatable 90° cutting of round tubes, square, and rectangular profiles in industrial production lines. With a servo motor and ball screw-controlled material feeding system, a hydro-pneumatically operated saw head, and a PLC-controlled touchscreen, it ensures stable cutting quality and high production efficiency. Key Features - Fully automatic straight cut tube and profile sawing machine - Servo motor and ball screw-controlled material feeder - Adjustable and controlled cutting speed with hydro-pneumatically operated saw head - PLC-controlled touchscreen - Up to 1000 mm single-feed and cutting per cycle - Multi-feed option for cutting longer than 1000 mm - Ability to cut four different lengths on the same material in a single batch - Dual-speed motor for optimal RPM selection according to material properties - High-performance gearbox with double helical gear transmission Cutting Capacity (Tube & Profile) - Maximum Saw Blade Diameter: 315 mm - Cutting Angle: 90° (±45° optional) - Round Tube: Max. Ø 100 mm - Square Profile: Max. 80 × 80 mm - Rectangular Profile: Max. 110 × 80 mm - Minimum End Scrap Length: 120 mm Technical Specifications - Main Voltage: 400 V - Control Voltage: 24 V - Installed Power: 3 kW - Current: 10.2 A - Saw Motor: 1.8 – 2.2 kW - Coolant Pump: 0.09 kW - Air Pressure: 6 kg/cm² (240 l/min) - Saw Speed: 40 / 80 rpm Gsdpoyg H S Ssfx Af Toip - Angle Rotation: 90° Saw Blade Specifications - Saw Blade Diameter: 315 mm - Blade Bore Diameter: 32 mm - Pin Holes: 2 × Ø11 - Coating Options: - TiN: For medium hardness steels - TiCN: For high rigidity steels - TiAlN: For stainless steels Machine Dimensions & Weight - Width: 1900 mm - Length: 1400 mm - Height: 1600 mm - Net Weight: 620 kg - Gross Weight: 650 kg

Condition: used, Automatic Grinder Manufacturer: Seydelmann Model: AV 250 K Completely made of stainless steel Electric power: 81kW Gijdpfx Aeukgzysf Top Voltage: 380V 60Hz Hole plate diameter: 250 mm Hopper content: 400 liters - 1000 liters

Condition: used, Throughput depending on material type, speed, and cutting set Capacity: up to 2.500 kg/h Main motor power: 10 KW / 15 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Gjdpfx Afohzcabj Teip Width: 110 Lenght: 90 Height: 125 Delivery time: 5 working days after advanced payment

Condition: used, Throughput depending on material type, speed, and cutting set Capacity: up to 4.000 kg/h Main motor power: 10KW / 15 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 110 Lenght: 90 Height: 115 Gisdpfx Afeu H Af Uj Tep

Condition: like new (used), Throughput depending on material type, speed, and cutting set Capacity: up to 4.000 kg/h Gedpfxod S U E Ro Af Toip Main motor power: 10KW / 15 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 110 Lenght: 90 Height: 115 Delivery time: 10 working days after advanced payment

Condition: used, Throughput depending on material type, speed, and cutting set Capacity: up to 1.600 kg/h Main motor power: 5.5 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 100 Lenght: 70 Height: 210 Gsdehwtpajpfx Af Teip Delivery time: 10 working days after advanced payment

Condition: new, Year of construction: 2025, functionality: fully functional, grinding length: 2,400 mm, total length: 3,500 mm, grinding width: 180 mm, grinding wheel diameter: 250 mm, Equipment: documentation/manual, GRAFS GR-2400e is heavy-duty straight knife grinder / vertical surface grinder with swiveling electromagnetic chuck, suitable for a broad range of industrial knives, such as guilotine knives for metal, granulator blades, veneer knives, chipper knives, planer and paper and knives HM / HSS for paper cutters. We are a sharpening shop for over 12 years. All our machines are in 100% build in GRAFS factory in Poland. TECHNICAL FEATURES / MAIN ADVANTAGES: • Mitsubishi Touch Screen operation panel HMI 7"; • Mitsubishi PLC, • Mitsubishi Inverter for carriage run adjustment / feed, • Internet communication system with GRAFS technical support in case of any problems, • Grinding wheel motor 11 kW (15 HP), 400-3-50 Hz; • Grinding wheel Ø250mm corundum in aluminum base, (segment grinding Geded Tc Haepfx Af Tjip wheel upon request); • Reversal of grinding wheel rotation; • Electromagnetic chuck 180x2400 mm; Surface grinding 180x2400mm, • T channel on the other side of the chuck (from operator side), • Angular divisor for magnetic table rotation ±120°; • Fast grinding wheel descent and ascent (by switches) and slow approach by hand wheel; • Motorized automatic grinding wheel downfeed, controlled by Mitsubishi PLC (0.001-0.05 mm); • Automatic work cycle (roughing, sparkout); • Variable carriage speed from 1 to 16 m/min; • Coolant through 2 nozzles either side of the grinding motor; • Longitudinal grinding head angle adjustment from 0° to 5°; (flat surface grinding possibility), • External tank with pump; • Magnetic cleaner / filter MODEL MS, • Fast grinding wheel exchange system, grinding wheel adapter with 3 securing screws, • Exchangable hardened steel strips on machine body guides, 2 at the top, and 2 at the bottom of main guide. • Carriage rollers from INA, on on the regulated cam, • Heavy body of the machine (steel plates 10 mm thick), build in cell design, • Electric cabinet on Shneider components, • Secure cover of the grinding wheel with magnetic interlocks, • User manual and control panel menu in Polish / English / German / Czech / Spanish / French, • Machinery LED lamp in working area, UPON REQUEST: • Different types of knives mounting, • Coolant cleaner with automatic paper filter, • Main grinding motor can be 5.5 kW, 7.5 kW and 11 kW, • The knife sharpening machine model GRAFS GR can be supplied in 4 different grinding lengths: 1.200 mm, 1.800 mm, 2.100 mm and 2.400 mm. • Accordion covers on whole body of the machine, • Mist collector, We provide an European Declaration of Conformity and all documents. The machine is new, we are a producer from Poland, we provide after sale support and service with 12 month's warranty.