Used Auger for sale (368)

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, number of axes: 4, This 4-axis HAAS VF-4SS was manufactured in 2019. It features an X-axis travel of 1270 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine is equipped with a spindle speed of 12,000 rpm and includes a chip conveyor, coolant filtration system, and a 4th axis drive. If you are looking to get high-quality machining capabilities, consider the HAAS VF-4SS vertical machining centre we have for sale. Contact us for further details. • Spindle nose to table (max): 742 mm • Distance spindle nose to table (min): 107 mm • Through-spindle coolant: Yes • Programmable coolant nozzle: Yes Redoza A Enjpfx Abljw • Rigid tapping: Yes • Visual part programming system: Yes • Ethernet interface: Yes • Remote monitoring: HaasConnect + HaasDrop • Electronic handwheel with touchscreen: Included • Coolant filtration system: Included • 4th axis drive and wiring: Included • Air blast through spindle: Included • Coordinate rotation and scaling: Included • Tool presetting arm: Included • Working light: Included • Standard memory: 1 GB • Machine orientation: Vertical • Installation and basic training: Included • Warranty: 12 months Additional equipment • Chip conveyor: Auger type • HRT210 Rotary Table (CNC rotary table) • Servo drive: Sigma 5 • Manual tailstock: 6" • Compatibility noted: VF-4SS

Condition: new, Year of construction: 2024, empty load weight: 178 kg, Dreipunktstreuer D301 0.3m³ Description: Spreader with three-point linkage (CAT 1) and a single spreading material chamber. The spreading material is conveyed via an auger and distributed by the patented spreading disc unit. Hydraulically driven motors, controlled by Kugelmann hydraulic block. All drives can also be operated manually in the event of control failure. Chain drive ensures high torque when starting the auger. Corrosion-resistant material combination: stainless steel subframe (VA) and plastic spreading material hopper. Support legs can be folded up towards the spreader during operation. Features: - Hydraulically driven single-chamber spreader with auger and spreading disc - Corrosion-resistant combination of stainless steel subframe and plastic hopper - Dimensions (WxDxH): 1080 x 590 x 1200 mm - Unladen weight: 178 kg - Includes apron/splash guard - Includes tarpaulin cover - Includes road lighting (compliant with StVZO) - RAL 2011 signal color - Manual emergency operation - Foldable support legs - Low energy consumption - Operable from an oil flow rate of 15 l/min - Patented spreading disc unit - Manual adjustment of spreading pattern - Winter service marked with reflective white warning film - Can be operated without control unit (via control cabinet key on easily accessible side) Rsdpfx Abjx S Tpvolow - Mounting for CAT 1 Standard Equipment: - Hydraulic drive for auger and spreading disc - Stainless steel (VA) subframe with RAL 2011 signal paint - Stainless steel spreading disc - Plastic spreading hopper - Plastic spreading disc guard - Mesh tarpaulin cover - Apron - LED lighting in accordance with StVZO - Foldable support legs (remain on device during use) - Manual adjustment of spreading pattern - Winter service marking - Operation possible without control unit - All drives are regulated and equipped with manual emergency operation - Hydraulic hoses with SVK couplings for forward and return - Spreader is fully storable (can be set down) Carrier Vehicle Requirements: - min. 20 L/min at reduced spreading output - max. 50 L/min with external oil cooler - Kugelmann system internally rated at 230 bar - Carrier vehicle with mounted spreader must not exceed permissible axle load or gross vehicle weight Optional Equipment: - k-basic 2 control unit - Wiring harness (flying) - Microprocessor control with CAN-BUS technology - Closed loop control of all drives (with feedback) - Functions: > Adjust spreading width > Adjust spreading density > Rotating beacon on/off > Work light on/off > Spreader operating/pause > Illuminated keys and rotary controls > Data recording > Speed simulation > x2 key for travel-dependent spreading (compatible with k-basic 2) - Option: Travel-dependent spreading incl. start/stop function – driving signal required - LED work light 12V Storage location: not specified

Condition: new, Year of construction: 2024, overall weight: 265 kg, empty load weight: 265 kg, operation weight: 265 kg, _____Basic equipment > Hydraulically driven single-chamber spreader with feed auger and spreading disc. > Spreader hopper and distributor made of stainless steel. > Dimensions (W x H x L): 1050 x 950 x 1800 mm. > Unladen weight approx. 265 kg. > Incl. tarpaulin cover. > Incl. manual operation. > Incl. rear extension. (Length determined by axle load calculation) Mounted spreader, A1201 B1050 H950 L1800 Carrier vehicle: Multihog MXC Batch/Serial number: 40941 Special equipment - Discharge welded - K-basis 2 control system, fixed wiring harness, microprocessor control in CAN-BUS technology. Regulation of all drives in a closed control loop (with feedback). Functions: - Adjust spreading width - Adjust spreading density - Beacon on/off - Work light on/off - Spreader operation/pause - Illuminated buttons and rotary controls - Data logging - Speed simulation - x2 button - Complete wiring incl. wiring harness separation - Terminal box for mounting outside the cabin Rear apron W 1500 x H 500 Yellow beacon Agitator shaft set - Improves functionality regarding bridging with damp, poor quality spreading material. Auger reversing - Allows reversing of auger direction at the press of a button on the unit in case the feed auger is blocked or jammed. Location: 54595 Prüm Rsdpfjw Ibbqsx Ablew

Condition: used, Year of construction: 2024, _____WTS-1200 Wet Salt Equipment Standard Equipment: Stainless steel folding cover, spreading container with brackets and drive, grating, removable parking stand, mounting bracket for category 2 and 3, fully hydraulic drive of the feed auger and spreading disc shaft, specially coated spreading container, stainless steel sliding plate, stainless steel spreading disc, stainless steel spreading disc device, equipment safety cover, protective cover for the hydraulic valves and electrical distribution, hydraulic block with anti-reverse protection, pressure oil filter, electronic spread pattern adjustment, LED lighting, color RAL 2011, Win-Icom road-dependent control system, stainless steel agitator shaft. Additional Equipment (for an extra charge): Work lights, wet salt system, 500L front tank made of plastic, rubber apron, winter service marking. Price from €23,450 (net). The photo is an example and may include special equipment. Storage location: null Redpfx Aju Ebk Hsbljw

Condition: ready for operation (used), Year of construction: 2017, operating hours: 5,300 h, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, controller model: NGC, table width: 1,219 mm, table length: 457 mm, table load: 1,588 kg, spindle speed (max.): 8,100 rpm, number of slots in tool magazine: 20, number of axes: 3, This HAAS VF-3 vertical machining center, manufactured in 2017, offers strong milling performance with a large 1219 × 457 mm table and a load capacity of 1588 kg. It is equipped with an 8100 rpm spindle and includes a chip conveyor as well as a through-spindle coolant 21 bar option. The machine is in excellent technical condition. If you are looking for high-quality milling capabilities, consider the HAAS VF-3 we have for sale. Contact us for more information. • Table size: 1219 x 457 mm • Tool magazine capacity: 20 tools • Stepless spindle speed control Additional equipment • AUGER – Screw-type chip conveyor • WIPS-R – Wireless probe system • ACF – Additional 25 μm filtration system • TSC – Through-spindle coolant with high-power pump (21 bar) Rjdpfxjzaallj Ablsw • Documentation / operating manual Technical Specification Taper Size ISO 40 Through-spindle Coolant Yes

Year of construction: 2018, condition: used, x-travel:1600 mm y-travel:1300 mm z-travel:700 mm distance between columns:1500 mm distance spindle center to table:225-925 mm table-size:1800 x 1300 mm table load:4000 kg T-slot (width-distance-quantity):22x 160 x 8 mm spindle taper:HSK-A 63 spindle speed:24000 U/min spindle drive:25/33 kW Spindle motor torque:72.6/95.8 N.m. rapid traverse in x-y-z axis:30000 mm/min Cutting feed rate X/Y/Z axis:1~20000 mm/min Tool changer:20 fach max. tool diameter:100/130 mm max. tool length:300 mm max. tool weight:8 kg total power requirement:80 kva Weight approx.:22 t Machine size (LxWxH):5660 x 5295 x 3930 mm CNC controller:Heidenhain TNC 620 spindle:IBAG electric spindle 24000rpm HSK-A63 Scales:Heidenhain automatic tool changer:20 fach chip conveyor - auger:2 Stk. Used portal milling machine with extensive accessories at a special introductory price. Important manufacturers of the components used in this storage machine are: Controllers and Servomotoren of Heidenhain, type TNC 620 Ball Screw Bearing - Japan Nsk X ball screw spindle Taiwan Hiwin Y Ball Bearing Taiwan Hiwin Z ball screw spindle Taiwan Hiwin Rjdpehx R Dvjfx Ablow 3 Axes Linear Guide - Japan Thk Or Germany Rexroth Electric screw unit - Hsk A63-24000rpm from IBAG Linear Encoder - Heidenhain Pneumatic System - Japan Smc Lubrication - Japan Showa Covers - Hema Air conditioning - Taiwan Kaokung Spindle water cooler - Taiwan point 3 axles Cable towing - Germany Igus Clutch - Germany KTR Company - Germany Mecano Relay - Omron Electricity - Germany Schneider MPG hand wheel - Japan Tosoku Further information on the machine, standard accessories and special accessories can be found in the appendix. Of course, we also gladly organize for you the delivery free house including assembly / commissioning and ready for handover as well as instruction

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, Linear Scale: Gentle and Precise Filling Technology Our linear scale is the ideal solution for simple and precise dosing and filling of products. It combines accuracy with a gentle handling process. Thanks to minimal drop heights, product damage is effectively prevented, ensuring the quality of your goods—even with delicate products. Flexible and Efficient Operating Principle The core of our technology is a straightforward yet highly effective operating principle: Products are conveyed via linear belts or vibrating troughs and precisely dosed into weighing containers. Features: - Easy operation and cleaning - Convenient control via color touchscreen - Memory for various weighing recipes - Precise weighing results thanks to three-stage weighing (coarse / medium / fine), individually programmable - Tool-free format change - Intuitive scale design enables fast conversion and easy cleaning - Product-friendly – the reduced drop height protects fragile and sensitive products - Versatile – suitable for both food and non-food applications - Accurate dosing ensures consistent product quality - Robust and hygienic: parts made of stainless steel 304, easy to clean - Compact design and durable construction save space and reduce maintenance With our linear scale, you receive a reliable, precise, and hygienic solution that increases the efficiency of your production processes. Technical Data - Weighing range: 20 g to 2000 g - Accuracy: up to 0.5 g, depending on product - 4.5-liter weighing container - Max. speed: 30 weighings/min (2-head scale) - Material: stainless steel 304 - Connection: 220V / 50Hz / 6A Discover more weighing systems from Impuls Packaging: - Linear scales (1-head, 2-head, 4-head, incl. mixing systems for blending 2–4 products) - Multihead weighers with 10 to 32 heads and mixing systems for up to 8 products (control via the system or remote control through network connection, upgradeable to live camera monitoring) - Multipack systems with up to 36 heads and up to 8 simultaneous discharges Rodpfx Aowymlyjbljw - Systems for sticky, frozen, and meat products - Special scales for stick-shaped products (e.g. pretzel sticks) including product alignment - Weighing systems for large products like salads - Fine weighing systems for accuracies up to 0.1 grams - Auger fillers (1-stage or 2-stage weighing) and powder filling (accuracy of 0.3%–1%, including automatic recalibration in conjunction with a weighing system) - and much more.

Condition: used, Automatic Bag Filling Line Bag weights from 5kg to 1000kg Infeed with product de-clumper / product breakup breaker and sieve. Incline screw auger to high level hopper and mixer. Delivery system to bag filler where weighing takes place and metal detection before bag filling point. This system comes with a second mobile screw auger for filling 1000kg big bag / sacks Rjdpfx Aeyq Tb Ijblew Complete with all the controls for the smooth running of this bagging line. After Bagging the bags are sealed with a Saxon Bag Sealer and then stitched with a Singer Bag Stitcher.

Condition: new, functionality: fully functional, power: 11.8 kW (16.04 HP), gearing type: automatic, fuel type: diesel, fuel consumption per hour: 1.5 l/h, fuel tank capacity: 19 l, color: orange, operation weight: 2,000 kg, lifting height: 3,570 mm, drive condition: 100 %, chain condition: 100 %, number of seats: 1, shovel volume: 0.04 m³, digging bucket width: 485 mm, Year of construction: 2026, operating hours: 5 h, Equipment: adjustable boom, adjustable chassis, cabin, hydraulics, parking heater, rubber tracks, Available immediately – Get in and get started right away! 🔥 SUMMER PROMOTION: SET PRICE ONLY €14,999 net plus VAT 🔥 Are you looking for a reliable, modern, and immediately ready-to-use mini excavator in the 2.0-tonne class? The LT-20 PRO from Tec-Point GmbH impresses with its high performance, high-quality workmanship, and maximum comfort – perfect for construction, landscaping, and municipal work. Thanks to its compact design and modern load-sensing hydraulics, this machine is ideal for confined construction sites and yet powerful enough for demanding earthmoving and foundation work. The enclosed cabin with heating makes the LT-20 PRO a true all-year-round professional machine! ⭐ Your advantages at a glance ✅ Side-swinging boom – ideal for tight working areas ✅ Telescopic undercarriage 990–1,300 mm – maximum stability ✅ Load-sensing hydraulics – precise and energy-saving control ✅ Axial piston pump with variable displacement ✅ Travel motors with high/low speed ✅ Double cast counterweights – increased stability ✅ Robust 230 mm rubber tracks – durable and wear-resistant ✅ Hydraulic quick coupler included ⚙️ TECHNICAL DATA Operating weight: 2000 kg Transport weight: 1820 kg Engine: Kubota D902 | 3-cylinder diesel Power: 11.8 kW Max. operating pressure: 23 MPa Bucket volume: 0.04 m³ Digging depth: up to 2,270 mm Digging reach: up to 3,910 mm Travel speed: 2.2 / 4.5 km/h Climbing ability: 30° COMFORT & EQUIPMENT ✔ Enclosed comfort cabin incl. heating ✔ Ergonomic joystick control ✔ LED work lights ✔ Radio ✔ Comfort seat for long shifts ✔ Dozer blade ✔ Hydraulic safety valves ✔ Reinforced steel structure for maximum load capacity INCLUDED IN THE SET: 3 BUCKETS + HYDRAULIC QUICK COUPLER The scope of delivery includes: ✅ 25 cm ditch bucket ✅ 50 cm digging bucket ✅ 100 cm grading bucket ✅ Hydraulic quick coupler ➡️ Immediately ready for any construction site! ➕ OPTIONAL ACCESSORIES AVAILABLE AT AN ADDITIONAL CHARGE Hydraulic tilt quick coupler with tilting function Hydraulic earth auger set up to Ø 300 mm Hydraulic hammer SERVICE & WARRANTY 12 months warranty throughout Europe Spare parts & service directly from stock in Rheda-Wiedenbrück Redpfxsx Hg D As Ablow IMMEDIATELY AVAILABLE + DELIVERY POSSIBLE Delivery throughout Europe possible upon request. Location: Rheda-Wiedenbrück Our machines are immediately available and ready for use. You are welcome to inspect and test all our machines directly at our location. 🔥Only available until the end of the month: LT-20 PRO including hydraulic quick coupler at a summer price of €14,999 net🔥 Secure this advantage now – the offer is only valid for a limited time! Request now & secure your advantage! Demand is high – secure your LT-20 PRO now. ➡️ Write to us directly via Maschinensucher or call us – we will be happy to advise you personally!

Condition: used, mileage: 1,000 km, power: 1 kW (1.36 HP), first registration: 02/2002, empty load weight: 810 kg, maximum load weight: 6,690 kg, overall weight: 7,500 kg, axle configuration: 4x2, brakes: other, driver cabin: other, gearing type: other, emission class: none, number of seats: 1, Equipment: cabin, German machine, year of manufacture 2002, Küpper Weisser wet salt spreader, type: STA 95, with control unit, capacity: 1.5 m³, wet salt container, municipal control system, foldable tarpaulin cover, auger drive, unladen weight: 810 kg. If a new TÜV inspection is required, we will be happy to provide a quote from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV certification, without new SP inspection, and without new UVV inspection. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: Redpfx Aboxl Skcjljw We offer and strongly recommend a viewing and inspection of the goods to avoid any misconceptions about their condition and suitability from the buyer's side. Viewings and inspections are possible at any time by appointment and are expressly encouraged. All information provided is without guarantee. We do not assume liability for errors or incorrect information in the listing. The buyer is obliged to independently verify the condition and specification of the goods/vehicles. Subject to prior sale, changes, and errors.

Condition: used, mileage: 210,100 km, power: 265 kW (360.30 HP), first registration: 03/2015, overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, loading space width: 2,420 mm, loading space length: 4,500 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), parking heater, * Mercedes Benz 18 t including complete winter service equipment and detachable rear crane * Mercedes Benz AROCS 2036 AK 4x4 * Color: Deep Orange * Wheelbase 3,900 mm * Engine OM470, R6, 10.7 L, 265 kW (360 hp) 1800 Nm * EURO VI * Displacement 10677 cm3 * Engine drive Rear, C * Hydraulic pump SEA A * Weight variant 22.0 t (9.0/13.0) * Winter service Increased front axle load 10.5 t * Transmission G 230-12/11.7-0.78 * Transfer case VG 2800-3W/1.45-1.04 Redpfxozfyddo Ablsw * All-wheel drive Permanent * Mercedes Powershift 3 transmission * Auxiliary drive for tipper pump * Meiler three-sided tipper with Bordmatic on the left * Municipal hydraulics by Schmidt * Mounting plate for snowplow size 5 * Turning assistant * Differential locks * leaf-sprung suspension * Rotating warning lights * electric windows and mirrors * Air conditioning * Auxiliary heater * Tire size front axle 385/65R22.5 * Tire size rear axle 315/80R22.5 * Rear crane HIAB XS088BS-2HiDuo, year of manufacture 2014 * Crane with remote control X-SDrive * Crane weight without support 1070 kg * Lifting moment 71.0 - 86.0 kNm * Special high-position on the right side of the vehicle * Mounting system A * Küpper-Weisser single-chamber spreading machine Type IMSSN E29035HFA, year of manufacture 2015 * Container made of stainless steel * Frame Duplex * Control cabinet in stainless steel * Container volume 3.5 m3 * Hopper length 2900 mm * Auger conveyor system * Spreading material distributor "OptiWet" * Spreading width 2-10 meters * Wet salt system - brine tanks capacity 2240 l * Drive via the vehicle's municipal hydraulics * Drop-off system RollTec 12 t * Control "Vpad SN" * Snowplow Schmidt TARRON MS 34.1 * including mounting devices * all from year of manufacture 2015 * Clearing width straight 3400 mm * Weight 1060 kg * Scraper blade combination * Splash guard (rubber) * Adjustable snow dust guard (fabric) * Plow lighting * and more * Subject to errors and prior sale

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag SR 25 BT / RH 18 | Used Drill | 5834 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 74500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Machine for concrete pile drilling, soil improvement, and vibrocompaction. Carrier device Sennebogen SR25BT (manufactured in 2008) with drilling attachment Delmag RH18 (manufactured in 2009). Drill table stroke 12.50m, total height 19.91m. Outreach 3.165 - 4.00m. Feed winch, winch for feed with freewheel, auxiliary winch, rear platform. Drill table SHT25, THE KDK ROTARY DRILL HEAD BT180-2 IS NOT PRESENT, PURELY A SOIL IMPROVEMENT DEVICE, drilling gearbox MBDA 3500 ABI. With single auger. NO Kelly bar. Mast support cylinder, automatic alignment. Hydraulic telescopic undercarriage with a width from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at BH 3.304. Drills and drilling accessories are available separately. Also available is a mobile mixing plant, brand MAT, consisting of a mixing container (throughput capacity 20m3/h), conveyor screw, mixing tank (capacity 4,000l), and plunger pump with remote control. The condition of the machine corresponds to the value of the operating hours. At the time of inspection in 2023, the machine was running/functioning without any abnormalities. As of October 2024, storage damages have occurred to valves, control, and hydraulic hoses. It is not possible to operate the machine with 2 attachments at the same time. The machine shows wear and tear appropriate to its age, mileage, and purpose of use on pins and bushes as well as signs of use (dents, abrasions, etc.). The machine was not tested under load. The machine was used with 55 and 80 paddles. After service and maintenance of the storage damages, the device is ready for use. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40844 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals Rsdpfoy Umklox Abljw ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Used Andritz Paladin 600B Rodpfx Aex N T Uaobljw Incl. combined stainless steel feed auger and mixer, 2x 55kW motors, other motor options negotiable Interior inspected 2 years ago Includes frame for roller and die change

Year of construction: 2021, condition: new, 2021 INFINITY MT500-P MELTING TANK with auger/PUMP never used - new Rodpfswu A Ugox Abljw

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, This 4 axis HAAS VF 2 SS YT vertical machining center was manufactured in 2020. Ideal for precision machining, it offers robust construction and advanced control technology. If you are looking to get high-quality milling capabilities, consider the HAAS VF 2 SS YT machine we have for sale. Contact us for more information. Standard equipment • 12,000 rpm spindle • High-speed 30+1 side-mount tool changer • Window air blast • 55-gallon coolant tank • Control system (Haas Control) • Ethernet interface • WiFi connection • Power failure detection module • Advanced tool management Rjdpfx Aoyaix Ueblow • Media display (M130) • HaasConnect (remote monitoring) • Safe Run • HaasDrop • Rigid tapping • Standard program memory (1 GB) • Stainless steel way covers • Phone charging station Included equipment • 4th + 5th axis preparation (pre-wiring) • High-speed machining option • Export packaging • Rotary table HRT210 • Direct control by mill CNC • Programmable coolant pump • Chip auger • Chip tray filter kit • Through-spindle coolant (300 psi / 21 bar)

Condition: good (used), Year of construction: 2009, HAAS VF-1 CNC vertical machining center Year: 2009 Table size 660mm x 356mm X axis traverse 508mm Y axis traverse 406mm Z axis traverse 508mm Spindle nose to table 102-610mm Spindle BT40 Spindle speeds max 7500 rpm Spindle motor 14.9kW Rapid feed rate 25.4m/min Toolchanger capacity 20 tools Weight 2500Kgs Accessories/options: - Haas (Fanuc compatible) CNC Control - Swarf auger Rsdpfx Aozhk S Doblew - 10 off assorted BT40 toolholders - Automatic lubrication system - Prepared for 4.axis ( wiring and drive is included ) Under power in our warehouse.

Condition: used, functionality: fully functional, fuel type: electric, color: white, axle configuration: 4x4, operation weight: 3,800 kg, empty load weight: 3,800 kg, fuel: electricity, Year of construction: 2012, Equipment: all wheel drive, Ice Resurfacer: + Euroglass Dupon Sport + OKAY 3500 Elektra + Year of manufacture: 2012 + Fully electric + Unladen weight: 3,800 kg; permissible gross weight: 6,000 kg + Wheel motor drive 4x4 + Max. speed: 15 km/h Rodpfxszd Ab Aj Ablew + Blade / auger / side brushes + Snow tank with forward tilting function + Water tank with pump and distribution pipe + 80-volt batteries + Charger Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and typos excepted; subject to prior sale!

Condition: new, Year of construction: 2023, Due to a planning error, I am selling a new, originally packed cantilever discharge system for a Fröhling heating system Rodpfouq Iy Rjx Abljw for 6 m room size with 1 m auger extension with separate drive for screw and turntable as 2 motors, ideal for 2 boilers Photo is from another system as mine is still packed

Condition: excellent (used), Year of construction: 2011, YEAR OF PRODUCTION: 2011 Technical specifications. - Basic machine Longitudinal stroke X = 700 mm Vertical stroke Y = 650 mm Transverse travel Z = 700 mm - Tool magazine with 295 tool places HSK A63 - Continuous rotary table at 360,000 divisions 65 rpm - 7-position multi-pallet from mm.500 x 500. Rotation footprint dia. 800 mm. - Allowable load on each pallet table kg 550 - No.01 Operator's station for loading/unloading workpieces - Spindle speed = 12,000 rpm - Refrigeration unit for conditioning the spindle cartridge - Spindle with provision for coolant supply through tool flange - Air-conditioned electrical control unit with air conditioner - Ecological protection working area and machine - Lamp for work area lighting - Scraping chip conveyor with rear exit - Chip evacuation augers - 750-l coolant collection tank with self-cleaning filter system; - Sealed top guard prepared for connection with centralized fume extraction system - CNC FANUC 16 I Options included - C301 Piece Washing - C303 Tool Cone Washing - C410 Tool Monitor MCM - C305 Oil Remover - C333 Automatic coolant filler - C308 High pressure 65 Bar Rsdeuz Urpopfx Ablsw - C403 Tool Presence Control By Laser - C412 Balluff read/write system with JTERM-01 - C408 Marposs radio-frequency touch probe MIDA T36 - jFMX MCM supervisory system including Network Part Program

Condition: refurbished (used), Year of construction: 2012, DL Packaging offers more than 50 Rovema vertical form-fill-seal machines, suitable for a wide range of products and packaging formats. These machines are refurbished to like-new condition in consultation with you, tailored to the right configuration for your application and budget. Benefits: Rodpfxewb Rvj Ablow Customized refurbishment: only what you need Siemens or Rovema Pack Control systems Can be combined with auger fillers, cup fillers, and (multi)head weighers Option to add inspection, labeling, and tagging systems Sustainable alternative to new machines, with warranty Over 750 machines sold and installed worldwide. Please also look at our website for the complete offer of machines. Request a no-obligation quote today – we’re happy to help and usually respond the same day!

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 8,100 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-4 was manufactured in 2017. It features an X-axis travel of 1270 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine is equipped with a maximum spindle speed of 8,100 RPM and a robust table size of 1321 mm x 495 mm, supporting a maximum weight of 794 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-4 vertical machining centre we have for sale. Contact us for further details. • Spindle taper: CT 40 • Max torque: 122.0 Nm @ 2000 rpm • Table dimensions: 1321 x 495 mm • Max weight on table: 794 kg • Tool changer: 20 positions (umbrella type) • Rapid feedrate (X/Y/Z): 25.4 m/min • Table to spindle nose (min/max): 107 / 742 mm • T-slots: 5 slots, 16 mm width, 80 mm pitch • Power-on time: 18673:41:20 • Cycle start time: 3974:33:16 • Feed cutting time: 2117:17:34 Rjdpfxey Sg H Us Ablsw • Included machine options/features: 15" color monitor, rigid tapping, USB port Additional equipment • Programmable coolant nozzle • Auger-type chip conveyor

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Key Features Accuracy ± 3µm at 3s placement accuracy ± 0.07° at 3s rotational accuracy New vision, optics, and camera system Various configurable (FOV & resolution) sets of cameras 3D & contactless height measurement options Multi-chip Max. 14 different pick-up tools/nozzles 5 eject tools Rsdpfxey S S Uwo Ablow 3 different epoxies/adhesives in a single pass Any flip chip/face-up die combination Dual module for even higher productivity (option) Bonding 0.5 - 25N closed-loop bond force 0-360° bond rotation Heated bond head (max. 450°C) (option) UV curing with up to 2,000mW/cm2 (365 / 405nm) (option) Dispensing High-end auger pump Time-pressure dispensing Piezo jetter valves Pin transfer Automatic epoxy volume control

Condition: like new (used), Year of construction: 2024, Traverses X Y Z: 762 x 508x 508, Table 914 x 457mm, Spindle speed 0 – 12,000rpm, Rodpev Tah Aofx Ablsw Spindle taper BT40, Spindle Motor 22Kw, HAAS Control, 30 Station ATC, through spindle Coolant , Low Volt light, swarf auger, spindle probe, tool setter

Year of construction: 2024, condition: new, Overview - of the different variants *Not every item is required: Optional: Rodoff Sbispfx Ablow - Bale breaker MHB from €24,990 net - Straw mill MHZ from €7,980 net - Special hopper €970 net - Cyclone from €3,750 net - Sheet metal silo demonstrator with discharge system (only shown schematically in the picture) *optional, if you want to feed it with a wheel loader Individual price net from €14,750 - demonstrator - Dust extraction screw - length approx. 4 m 4 sieves are mounted on the underside, which are used for suction. Individual price net from: €9,750 - Suction parts / hoses, lump sum €945 net - Control system for the entire system Individual price net: €2,750 - Demonstrator suction unit MMJET 160, with cleaning Connection 160, Fan 2.2 kW Air flow 1850 m³ / 400 V Automatic compressed air cleaning Individual price net from: €6,950 - Bale press B 400 Bales approx. 400x400x800 (height adjustable) Up to 30 bales per hour with approx. 20 kg from €59,995 net *A reference system (baler) is located in postal code: 64579 Gernsheim Technical data: Bale size (W x D x H): 400 x 400 x 800 (height can be adjusted on request) Weight of the bale +/- 20 KG (material-dependent) Capacity: approx. 30 bales per hour Hopper capacity approx. 0.7 m³ Level sensors for min./max. level in the hopper Hydraulic pre-compressor Hydraulic press ram Hydraulic unit, valve block with oil tank Pump 18.5 kW / 50 liters Rollers in the press channel for easy bale discharge Dimensions (L x W x H) 3105x2830x2455 mm Weight approx. 1500 KG mütek bale presses / packaging machines have been developed for the production of bales from a wide variety of materials, such as shredded miscanthus or elephant grass, wood chips, sawdust and shredded straw. The machine is characterized by a robust design, which guarantees consistent quality in continuous operation. The bale press compresses the material fed into the hopper without the addition of binders by means of hydraulic pressure and packages the material in plastic bags. The volume of the material can be significantly reduced with the bale press. The volume reduction rate depends on the material. The maximum material moisture content must not exceed 18% dry weight. The hopper of the mütek bale press can be filled automatically or manually and has a volume of approx. 0.7 m³. Hoppers with larger volumes or with an integrated suction and filter system as a complete disposal unit are also available. In addition to automatic filling via a dust extraction system, mütek also offers filling by means of screw conveyors. In both variants, automatic dust extraction is possible. mütek bale presses are equipped with a control cabinet. In the standard version, the dimensions of the bales (width x depth x height) are 400 x 400 x 800 mm. However, the height can be adjusted to your requirements on request. The following advantages result from the production of bales: - simple and safe storage - no loose dust - Minimization of the storage volume - Low transport volume *Requirements for the raw material: - dry (max. 30% dry weight) - maximum 35 mm long

Condition: good (used), Refurbished machine Rodpfx Abs E Dqujlsw *Options at additional cost, see below with a full 1 year warranty Ready for delivery approx. 16 weeks after ordering Technical specifications: Throughput up to 1200 kg / h depending on the material (e.g. sawdust with a bulk weight of 150/180 kg / qbm) Briquette Ø 75 mm including 2 m press channel Main motor power 45 kW Feed screw gear motor 2 x 2.2 kw Compressor screw 2 x 5.5 kw Distribution auger 2.2 kw Hydraulic pump motor 0.37 kW Total connected load 65 KW Control panel with plain text display for operating states and utilization display for main drive and feed screws PLC control Siemens S7 / 300 with operating hours counter in the control cabinet Machine hat CE mark Automatic start / stop function of the machine Dimensions 3100x860x1800 mm lxwxh Weight 4500 kg Options: -Silo for MAP series Storage silo above the machine - Contents approx. 6 square meters, stable steel construction with agitator discharge and level indicator. 19,700 € net plus VAT. *only possible for one presse MAP 1200 below the silo if you need to place two machines MAP 1200 below one silo it needs to be build completely different. the price for this silo is 37.900 € net -Temperature control device for the pressing tools to maintain the temperature for optimal briquette size. Temperature controller for pump, cooling unit, fan, pressostat Wired ready for connection - must be left for operation including corresponding control € 7.850 net Oil heater 1.950 € net -Guillotine, to cut the briquettes to length Create a compressed air connection on site € 6,940 net plus VAT -Transport line / cooling section (nominal value: 4x2m) 990 euros net per 2 meters - Control System 4.995 € net Assembly / commissioning (nominal value approx. 2-3 days on site to install one press) based on effort and upon proof against separate invoice. The following sentences apply: Service technician/mechatronics technician per assembly and hour of travel: €129.00 Overtime: 25% surcharge 50% surcharge per Saturday and night hour 100% surcharge for every Sunday and public holiday hour Release per fitter per day: country dependent Per car, van and driving kilometer: €0.98 / km Arrival and overnight stay against receipt or flat rate bill at the client's expense. . Test with the respective customer material: (up to a maximum of 750 kg) - €1,970 net flat rate --- Recognition from the raw material: - The moisture content must be between a minimum of 6 and a maximum of 18% - Maximum span 20 mm - Excessive temperature: temperate room at at least + 5 ° C. - The loading must be free of metals and mineral impurities. This and the pressing tools and / or responsible wear can be the result