Used Lgu Haecksler for sale (25)

Condition: used, filtration surface (sqm): 12 discharge of vessel: automatic discharge Fpedpfxez Ri Ize Aivsn operating pressure (bar): 9 electrical power supply kW: 5 weight [kg.]: 1500 volume of vessel (ltr): 880

Condition: used, *Filter area: 3 m2 Installed power: 2,45 kW Horizontal disk filter with manual discharge system* This filter uses the horizontal disc system, the only type able to ensure the panel is undamaged even by accidental interruptions in filtration. There is no risk to the panel even in the event of incorrect operation or power cuts. The liquid in the vessel, batching unit and pipes is filtered perfectly at the end of work using a special disc for the purpose. Fsdpfxez N Euhs Aivjpn The special filter unit used means that cleaning can be carried out simply using a jet of water and the sped al chute supplied. Manufactured in stainless steel throughout, including the feed pump, pipes, valves and caster-mounted frame. Complete kieselgur batching system with vanable delivery piston pump and stainless steel tank with built-in electric mixer. Electric panel complete with every control and safety device required for safe, dependable operation.

Condition: used, Year of construction: 2000, Filter area: 10m2 Fpodpfjz N D Rusx Aivjn Instructions for use and spare parts list available

Condition: used, material: 1.4301 Fpedsz Ri S Hspfx Aivjn Plate formats: 400x400

Condition: used, Vertical tank with a top-entry three-bladed propeller agitator (TMR, 1.6 kW), most recently used for mixing diatomaceous earth. Additional title: vertical vessel with agitator Volume appr.: 1500 l Power: 1,6 kW Length: 1100 mm Width: 1100 mm Fpedpfx Aiszi Aquevjn Height: 2200 mm Position: standing on 4 feet Base construction: cylindrical vessel on feet Features: Agitator; manhole on the top; control cabinet

Condition: used, Year of construction: 1977, VA kieselguhr filter 100 x 100 H&K brand with hydraulic pressure Material: Stainless Steel Features: Kieselguhr discharge pump, manufacturer Allweiler, type SNP 2002, H4P1; Q L/min: 100; Nl(min) 280; flange connections inlet DN 100, outlet DN 80; length 1.9 m Kieselguhr discharge container with screw (diameter 22 cm) and drive motor; motor 1.1 kW, 1,420 rpm; outlets: DN 100 (kieselguhr), DN 65 (liquid); overall dimensions: 2.85x1.195x0.615 m (LxWxH) Fpjdpfx Aioxbpk Sovon

Condition: used, Combi filter (kieselgur- and sterilising filter) for beer filtration with hydraulic pressure, 100 x 100 cm filter plates and external risers. Additional title: combination filter Capacity: 120 hl/h Plate size: 100 cm edge length Length: 7000 mm Width: 1500 mm Fodpfxevcqlwe Aivepn Height: 1500 mm Position: horizontal Base construction: mounted on steel frame, standing on feet Features: 31 kieselguhr layers (32 frames), 50 sterilisation layers, 4 pressure manometers (10bar), 6 lanterns, risers, kieselguhr discharge screw (Allweiler), gravity measurement, flow measurement, 3 x turbidity measurement (inlet, outlet Kieselgur filter, outlet 3 x turbidity measurement (inlet, outlet kieselgur filter, outlet sterilisation filter). Spare parts: 295 sealing rings for filter plates, 3 kieselguhr filter support plates

Condition: used, Kieselguhr plate filter, 60 x 60 cm with 35 frames and 34 plates, manual pressing. Complete filtration plant consisting of: - kieselguhr plate filter - kieselguhr dosing vessel with agitator - kieselguhr dosing pump - feed pump - flow meter Fpsdpfsxbpiuex Aiven Additional title: Frame filter with agitator tank, dosing pump, feed pump and flow meter Number of frames: 35 Number of plates: 34 Length: 4,7 m Width: 0,8 m Height: 1 m Weight: 2500 kg

Condition: like new (used), Year of construction: 2015, load capacity: 1,000 kg, lifting height: 7,700 mm, construction height: 3,050 mm, operating hours: 2,089 h, fuel type: electric, mast type: triplex, Manufacturer + model: CROWN SP 3522 - 1.0 Mast: 3F7700 ID: 23033.2653 Category: Used Mast type: 3F Lowered height: 3050 mm Lifting height: 7700 mm Capacity: 1000 kg Platform height: 7000 mm Picking height: 8600 mm Fpedpfxjzut Sye Aivon Cabin width: 1370 mm Year: 2015 Hours: 2089 hours Capacity: 24 V / 775 Ah - Hoppecke Options: FULL options - Mast = Triplex FFL - Equipped with side guidance & sensors (INCLUDING side roll / wheels & sensors!!)

Condition: like new (used), Year of construction: 2015, load capacity: 1,000 kg, lifting height: 5,050 mm, construction height: 2,900 mm, operating hours: 3,183 h, fuel type: electric, mast type: duplex, Manufacturer + model: JUNGHEINRICH EKS 210 Mast: Z + S - 2W5050 ID: 25053.2983 Fpsdozq Udvopfx Aivjn Category: Used Mast: 2W Lowered height: 2,900 mm Lifting height: 5,050 mm Capacity: 1,000 kg Platform height: 4,250 mm Picking height: 5,850 mm Initial lift: Yes Cabin width: 1,000 mm Year: 2015 Hours: 3,183 h Battery capacity: 48 V / 465 Ah Options: - Side guidance / Rail guidance

Year of construction: 1987, condition: good (used), - Year of construction: 1987 - Horizontal sieves - 30 filter plates Fodpfxet Igd Ns Aivjpn - Filter area : 6 m2 - Max, operating pressure : 6 bar - Capacity : 30 - 120 hl/h - With semi-automatic cleaning - Dosing pump replaced in 2017 - Machine in good condition Dimensions : - Length : 1800 mm - Width : 850 mm - Height : 2000 mm

Year of construction: 1980, condition: good (used), - Horizontal sieves - 30 filter plates Fsdpsmn I Nxjfx Aivspn - Filter area : 6 m2 - Max, operating pressure : 6 bar - Capacity : 30 - 120 hl/h - With semi-automatic cleaning Dimensions : - Length : 1800 mm - Width : 850 mm - Height : 2000 mm

Condition: new, Year of construction: 2019, load capacity: 1,200 kg, lifting height: 5,950 mm, construction height: 3,410 mm, operating hours: 3 h, fuel type: electric, mast type: duplex, Manufacturer + model: LINDE V (5213) Fodpfxjzut Ste Aivjpn Mast: 2W5950 ID: 23079.5136 Mast: 2W Lowered height: 3410 mm Lifting height: 5950 mm Capacity: 1200 kg Platform height: 5350 mm Picking height: 6950 mm Cabin width: 1200 mm Year: 2019 Hours: 3 hours Capacity: complete NEW * 48 V / 465 Ah * Year of manufacture 2026 Options: FULL options!! - SAFETY doors with TILTING FUNCTION!!! - Equipped with side guidance (INCLUDING side roll/wheels!!) Complete NEW / Unused!!!

Condition: good (used), Year of construction: 2014, operating hours: 6,884 h, load capacity: 1,300 kg, lifting height: 5,700 mm, fuel type: electric, mast type: duplex, construction height: 3,250 mm, Manufacturer + model:MAGAZINER EK 1300Mast:2W5700 ID:25072.5431 Cat.:Used Mast:2W Forks:1200mm Fsdpfx Aozuti Eoivepn Lowered height:3250 mm Lifting height:5700 mm Capacity:1300 kg Platform height:4150 mm Picking height:5750 mm Init.:Yes Year:2014 Hours:6884 hoursCapacity:48 v / 930 ah Options:VNA truck / Man up - SAFETY doors with TILTING FUNCTION !!! - Side guidance / Rail Guidance

Year of construction: 2000, condition: good (used), - Filter area : 6 m2 - Machine in good condition Fodpfshlvhnox Aivspn

Condition: used, empty load weight: 3,910 kg, maximum load weight: 14,090 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 08/2013, loading space volume: 30 m³, gearing type: other, driver cabin: other, Equipment: ABS, * German vehicle * 1st owner * Complete documentation with all inspection reports available * 30 m³ 3-chamber tank * Suitable for all types of grain, dust, and free-flowing bulk goods * Bottom discharge * 3 dome lids * Tank inspection (internal) valid until 04-2028 * Tank inspection (external) valid until 04-2027 * Aluminum tank construction * Safety conveying system * Safety aluminum shear grate * Operating pressure -0.5 / 2.0 * Air suspension * BPW axles with disc brakes * Aluminum rims * ABS/EBS * Gross vehicle weight (GVW) 18,000 kg * Unladen weight 3,910 kg * Payload 14,070 kg If a new TÜV (technical inspection) is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does not include a new TÜV inspection, new DGUV (German Social Accident Insurance) certificate, new SP (safety report), or new UVV (accident prevention regulations). You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: We strongly recommend and offer an inspection and examination of the goods so that the buyer does not have any false impressions about the condition and suitability. Inspections and examinations are possible at any time by appointment and are expressly desired. Fpedpfxezinhlj Aivsn All information is provided without guarantee. We are not liable for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods / vehicles. Subject to changes, prior sale, and errors.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, control type: PLC-controlled, Auction of a medicinal and spice processing line. The line is still in its original packaging and has never been used. The video shows a sample machine. The offered line consists of the following components: - ST II VIBRO W - LGU 252 - VIBRO 14 - OGK 1003-A - DOUBLE ZIG-ZAG Control system: PLC-controlled Processing capacity: 20 plants in 5–6 fractions ST II VIBRO W TECHNICAL DETAILS - Sieve length: 1,200 mm - Sieve width: 800 mm - Number of sieves: 2 - Sieve inclination: continuously adjustable from min. 5° to max. 10° - Screen perforation: according to customer requirements MACHINE DETAILS Drive - Type of drive: vibratory motors - Motor power: 2 × 0.18 kW - Motor power: 2 × 0.60 kW Machine weight: approx. 480 kg LGU 252 TECHNICAL DETAILS - Number of sieves: 2 - Sieve size: 2,500 × 800 mm - Sieve perforation: "Peterson" - Inclination adjustment: continuously from min. 20° to max. 40° - Conveyor belt with cleats: 600 mm MACHINE DETAILS - Dimensions (W × L × H): 5,000 × 1,700 × 3,000 mm Drive - Motor power: 0.75 kW - Motor power: 1.5 kW - Motor power: 1.1 kW - Motor power: 2 × 0.55 kW - Operating voltage: 380 V OGK 1003-A TECHNICAL DETAILS - Number of sieves: 1 - Number of blades: 2 - Throughput: min. 40 kg/h to max. 100 kg/h MACHINE DETAILS - Dimensions & weight - Dimensions (W × L × H): 2,440 × 1,914 × 2,525 mm - Machine weight: approx. 970 kg - Motor power: 1.1 kW - Operating voltage: 380 V DOUBLE ZIG-ZAG TECHNICAL DETAILS - Throughput: max. 150 kg/h MACHINE DETAILS - Dimensions (L × W × H): 2,400 × 2,000 × 5,000 mm - Exhaust fan: 1 GENERAL EQUIPMENT - Control 208 - PLC - Aspirator I-6 - Control 308 - Belt conveyors (12 units) - Air technology - Magnets - Speed controllers Note: The machine has been dismantled and is in storage (see photos). Fedjx Nnawjpfx Aivspn

Condition: used, Year of construction: 2013, Overview  This diatomaceous earth filter was manufactured in 2013 by Spadoni (Italy) and later adapted by (Spain). The mobile filtration unit is equipped with an integrated pumping and control system for fine filtration with diatomaceous earth. It is on sale because the owner upgraded to a newer model. The filter is in good condition and available immediately. Technical data - Capacity: Approx. 80 hL/h - Filtration system: Diatomaceous earth - Tank: Pressurized stainless steel Fodpfoxfcc Aex Aivepn - Pump 1: OBL MHBN100PP, 100 l/h capacity, 10 bar max pressure - Pump 2: EBARA 2CDX/E 120/30, stainless steel liquid transfer pump - Valve system: Stainless steel, precise flow control - Design: Mobile filtration unit with integrated control system

Condition: used, maximum load weight: 29,200 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 09/1997, next inspection (TÜV): 08/2023, Equipment: ABS, * ABS * Alloy wheels Fsdpfx Asu I H D Reivjpn * Front landing gear * Steering axle * BPW ECO axles * 5-chamber tail lights ----Construction: cement silo trailer (for granular and dusty goods), capacity: 40,000 ltr, next external inspection 11/24, next internal inspection 11/25, max. permissible pressure 2.0 bar, permissible temperature min/max -40/+80 degrees, 4 sliding dome covers with pneumatic locking, 2 outlets lockable, 4 inch material line collected to the left----3rd axle steering axle Sale only to traders. FOR EXPORT ONLY THE NET PRICE IS TO BE PAYED !!!!! ALL INFORMATION IS WITHOUT GUARANTEE. EQUIPMENT + ACCESSORIES.The basis of all purchase contracts, invoices, pro forma invoices, orders and sales talks are our general terms and conditions (see legal notice).

Condition: like new (used), Available for sale: a stock of 42 unused LANGQIN solid tyres for heavy-duty telehandlers. Specifications Manufacturer: LANGQIN SANY part number: 60026737 Tyre size: 14.00-24 Load/speed marking: 196A3 Tread/specification: L-3S Construction: solid tyre with cushioning apertures Dimensions: approximately 1,332 × 1,332 × 352 mm Fpsdpfxjz D Sqke Aivsn Quantity available: 42 pieces Condition: unused, with possible dust and storage marks Purchased in: 2024 Production date: unknown Application: off-highway use only The majority of the tyres are supplied as loose tyres without rims. A limited number are mounted on steel rims. The exact distribution and technical specifications of the available rims must be confirmed during inspection. The 14.00-24-196A3-L-3S specification is used on selected heavy-duty SANY telehandlers, including the STH1056A and STH1256A. Before purchasing, the buyer must verify compatibility with the relevant machine, rim and configuration by checking the SANY part number. The tyres have a directional tread pattern. The indicated direction of rotation must be observed during installation. The tyres can be supplied in smaller quantities or as one complete lot of 42 pieces. Inspection and reservation This description is based on the visible markings, available stock information and photographs. All information, including quantity, condition, dimensions, weight, rim configuration and technical compatibility, is subject to inspection and final verification. Inspection prior to purchase is available and expressly recommended. The tyres are sold in their present condition. No guarantee can be given regarding the production date, exact weight or suitability for a particular application without further verification.

Condition: used, axle configuration: 3 axles, first registration: 05/2000, total length: 13,100 mm, total width: 2,550 mm, total height: 3,900 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2000, Equipment: ABS, = Additional Options and Accessories = - EBS - Hydraulic system - Aluminum rims = Notes = Number of axles: 3, Tare weight: 6605 kg, Gross vehicle weight: 34000 kg, Chassis type: Full chassis, Chassis material: Aluminum, Kingpin size: 2 inch, Aluminum rims, Suspension type: Air suspension, ABS, EBS, Hydraulic system, Body year of manufacture: 2000, Body material: Aluminum, Drum volume: 63, Drum volume in: m3, Compartment layout: 1 compartment, Type of load: Silo, Axle type: BPW = Additional Information = General Information Cab: Day cab License plate: KLEYN1 Drivetrain Fuel type: Diesel Transmission Transmission: Manual transmission Axle Configuration Tire size: 385/65R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Lift axle; Tire tread depth left: 5 mm; Tire tread depth right: 8 mm Axle 2: Tire tread depth left: 8 mm; Tire tread depth right: 4 mm Axle 3: Tire tread depth left: 6 mm; Tire tread depth right: 4 mm Weights Tare weight: 6,605 kg Payload: 27,395 kg GVW: 34,000 kg Environment Emissions class: Euro 0 Fpsdjzgtuljpfx Aiven Condition Overall condition: average Technical condition: average Optical condition: average Damage: none = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractors, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large and rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send an inquiry via our website. Ask directly about our European warranty package.

Condition: good (used), Year of construction: 2021, Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: Montech, Belt conveyor type TB30 double belt with light switch -Speed: 87 m/min -Drive: Nucleus NUDrive MP85 10A Bgr2 R Rev2 IP64 Fpsdpfx Asyia Enoiven -Strap width: 2x 15 mm -Conveyor length: 1290 mm -Light switch: Sick WTB9-3P2261, not connected -Transport dimensions: 1290/390/H260 mm -Weight: 14.5 kg

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 2 h, functionality: fully functional, shaft length: 355 mm, input voltage: 230 V, type of input current: AC, laser power: 20 W, type of cooling: water, warranty duration: 12 months, laser wavelength: 355 nm, input frequency: 50 Hz, Equipment: cabin, UV laser engraving machine with 20-watt laser power Laser source with 355nm wavelength / 20 watts Exhibition machine, with approximately 2 hours of operation - No discernible signs of wear - Includes rotary axis - Includes Windows 64-bit PC system - Includes 22" monitor - Everything is fully installed and calibrated - Engraving software in German - 3D software (MM3D) - Very easy to operate - Simply turn on and start - UV laser source with 20 watts for high-contrast and fast marking with extremely high resolution - Engraving on virtually all metals (stainless steel, brass, aluminum, etc.) - Engraving on virtually all plastics (including PVC, silicone, etc.) - Engraving on real glass (including crystal glass) - Cutting of real glass is possible - Heavy-duty industrial quality - Complete system / ready for immediate use - Work area approximately 500 x 600 x 600 mm (L x W x H) - Clamping surface with mounting threads in a 50mm grid - LED work area lighting - 50mm pipe connection for fume extraction - Engraving area approximately 150x150 / 200x200 / 300x300 (switchable) - 3D scanner for marking surfaces of any shape - Includes foot switch to start the engraving process Sales are exclusively to commercial businesses. Delivery / Consultation / Sales only in Germany / Austria / Switzerland Please also note our attractive leasing/hire purchase offers. Machine dimensions approximately: Fedpfxsflrnae Aivspn Width: 800mm Height: 1800mm Depth: 1000mm Weight: approx. 180kg

Condition: good (used), We offer you 4 transport rollers for sale here. The scope of delivery includes: 04x swivel casters, used Roller material color: black Frame material color: sendzimir galvanized Technical data: Overall height: approx. 155 mm Roller diameter: approx. 125 mm Roller width: approx. 37.5 mm Roller material: solid rubber Rim material: polypropylene Plate dimensions: approx. 100 x 90 mm (W x D) Hole diameter: approx. 9 mm Number of holes: 4 pcs Screw hole spacing: approx. 80 x 60 mm (center to center) Fpjdshunwaopfx Aivsn Weight / piece: approx. 0.803 kg

Condition: as good as new (ex-display), End milling cutter for hard metal castings Diameter 79 mm and length 61 mm Diameter 98 mm and length 70 mm Weight 4 kg Fpedpfx Asdwbkwjiven