Used Auger for sale (369)

Condition: used, axle configuration: 1 axle, first registration: 10/2016, color: red, power: 15 kW (20.39 HP), gearing type: other, driver cabin: other, * German trailer * 1st owner * Condition – see photos * TRILO VANMAC SU60 leaf vacuum * The SU60 suction units are specifically designed for the rapid collection of leaves, debris, grass, wood chips, etc. * The TRILO® SU60 suction unit is mounted on a roadworthy chassis suitable for high-speed transport (up to 80 km/h) and can easily be coupled to your vehicle, allowing you to transport and start using it anywhere. * The SU60 comes standard with a 5-meter-long hand hose equipped with a robust end tube and handle. * The SU60 is powered by a reliable Honda 2-cylinder, 20 HP petrol engine with electric start. * The 600 mm diameter radial fan is enclosed in a wear-resistant double-walled housing and driven by a V-belt. * 5-meter-long hand hose * Adjustable, 360-degree rotatable discharge spout * Ø 600 mm turbine fan * Replaceable wear plates * Statically and dynamically balanced * Easy cleaning via dirt water drain cap * Unladen weight: 440 kg If you require a new technical inspection (TÜV), we will gladly obtain an offer from our partner workshops. Our offer is generally WITHOUT new TÜV, without new DGUV, without new SP, and without new UVV inspections. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspecting the item to avoid misunderstandings about its condition and suitability. Viewing and inspection are possible at any time by appointment and are expressly desired. All information provided without guarantee. We do not accept liability for errors or incorrect information in this offer. The buyer is obliged to verify the condition and features of the item/vehicle independently. Fpodpfsxu Nn Dox Ag Dod Subject to alterations, prior sale, and errors.

Condition: used, operating hours: 3,596 h, mileage: 73,289 km, power: 78 kW (106.05 HP), first registration: 09/2008, overall weight: 5,000 kg, fuel type: diesel, color: orange, axle configuration: 4x4, maximum load weight: 2,180 kg, empty load weight: 2 kg, wheelbase: 2,450 mm, brakes: other, driver cabin: day cab, gearing type: mechanical, emission class: euro3, number of seats: 2, Equipment: ABS, additional headlights, all wheel drive, cabin, differential lock, power assisted steering, * German vehicle * Condition, see photos * original ONLY 73,289 km * ONLY 3,594 operating hours * Structure from premium manufacturer TRILETY, type MCK * Dirt collection unit at the rear, consisting of 2 disc brushes, each 900 mm Ø, as well as suction mouth and suction channel with wear protection coating, sweeping width approx. 2000 mm * Hydraulically driven high-performance suction fan, suction capacity approx. 11,000 m³/h, negative pressure in the container max. 1,100 mm/WS * Dirt container made of stainless steel (DIN 1.4301) with a volume of approx. 2.3 m³, 2 observation flaps (left and right). High-tip emptying with an emptying height of approx. 1,400 mm. Separate fresh water tank (stainless steel DIN 1.4301) with approx. 400l * Control panel for controlling the sweeper in the driver's cab of the vehicle * Water spray system with electric pump 12V, solenoid valves and spray nozzles on the disc brush and in the suction mouth, connection for spray hose for machine cleaning * Leaf suction hose 130 or 150 mm Ø, 3 m long, with shock tube made of sheet steel and water spray nozzle, mounted on the tailgate * Front brush can be extended hydraulically to the right, pulled with disc brush 1,000 mm Ø, including hydraulic tilt adjustment from the driver's cab and contact pressure control on the brush unit * High-pressure water pump Additional, hydraulically driven high-pressure water pump for machine cleaning, 15 l/min at max. 150 bar, including hose reel with 10 m hose and washing lance with adjustable jet * Sweeping speed 2 - 15 km/h * Emptying height 1,450 mm * Tipping hydraulics * Change system for 3-way tipping body or holding frame for attachments * All-wheel drive * 5-speed manual transmission * Creep gear * ABS (anti-lock braking system) * Windscreen heating * Comfortable driver suspension seat * Driver's cab rear wall with window * Surface-mounted headlights * Rotating beacons * Wheelbase: 2,450 mm * GVW: 5,000 kg * Payload: 2,820 kg * Payload 2,180 kg If you require a new TÜV inspection, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without new DGUV, without new SP, without new UVV.  You can find more trucks on our homepage at Fedpfjvtnvhox Ag Dspd We speak the following languages: German, English, Polish, Turkish Note:  We offer and strongly recommend an inspection and testing of the goods so that the buyer does not have any false impressions about their quality and suitability. Inspections and tests are possible at any time by appointment and are expressly desired.   All information is provided without guarantee. We are not liable for errors or incorrect information in the offer. The buyer is obliged to check the condition and equipment of the goods/vehicles for themselves. Subject to changes, prior sale and errors. - .

Condition: used, mileage: 32,189 km, power: 170 kW (231.14 HP), first registration: 07/2001, fuel type: diesel, empty load weight: 16,730 kg, maximum load weight: 2,770 kg, overall weight: 19,500 kg, tire size: 12R22,5, axle configuration: 4x2, wheelbase: 3,900 mm, fuel: diesel, color: orange, driver cabin: other, gearing type: mechanical, emission class: euro3, suspension: other, number of seats: 2, total length: 9,700 mm, Year of construction: 2001, operating hours: 1,492 h, construction height: 3,470 mm, Equipment: ABS, air conditioning, cruise control, onboard computer, traction control, The Mercedes-Benz Atego ZW with the special KROLL 950.50 ZW two-way track cleaning equipment is a used two-way suction and pressure vehicle. This vehicle was first registered on July 25, 2001 and has a mileage of 32,189 km. Powered by a 6,374 cc diesel engine with an output of 170 kW (231 hp), it meets the Euro 3 emissions class. It has a manual transmission with six gears and offers space for two people. The vehicle is equipped with a rail driving device that allows it to drive on tracks at a speed of up to 30 km/h. The body contains suction nozzles for picking up objects from the track bed and a dirt collection container with a volume of approx. 8.5 m². Other features include a pneumatic rake device, a dry filter system and a comprehensive fire monitoring and extinguishing system. The operating time is 1,492 hours. The robust Atego is painted orange and has dimensions of 9,700 mm long, 2,300 mm wide and 3,470 mm high. The total weight is 19,500 kg. With additional safety and control systems such as a sand spreading system, video surveillance and a hand hydraulic pump, this truck is particularly suitable for demanding rail cleaning tasks. Vehicle covered in stickers over a large area. TWO-WAY TRACK VACUUM CLEANER. Self-propelled work machine. ACCESSORIES: 2-axle (4x4) SA rail travel device for rear-axle driven trucks, can be changed to 1,000 mm I 1,435 mm. Rail travel speed 30 km/h Track cleaning structure: suction nozzles for picking up objects of various sizes and weights, from cigarette butts to champagne bottles. The objects are picked up without removing ballast from the track bed. - Dirt collection container (approx. 8.5 m²) - Rake for loosening stuck-on dirt (pneumatic) - Hand suction hose device - Dry filter system Fpedpfx Ajr Uzllog Dsd - Fan - Fire monitoring and extinguishing system (dirt container) EQUIPMENT: All control elements of the rail travel device in the driver's cab - Position control of the rail chassis - Lighting of the rail chassis - Hand hydraulic pump - Earthing device - Earthing cable and rail clamp - 4-way sand spreading system - Signal light and warning system (DB + BOStrab, bell, compressed air horn M 75l660 UIC) - 4-way work lights - Coupling device - Video surveillance system "ORLACO", Sale only to traders (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved.

Year of construction: 2001, condition: used, 1 station auger fillingmachine Make: Bouwpaco Type: Semi-automatic 1-head auger dosing machine Model: BPS37SA Capacity: 1.500 filling/hr, depends on volume and product Fpjdpfx Agjg Du The Ded Frame: Steel/ stainles steel electric: 380 Volt – 50 Hz Dimensions L x W x H = 1.000 x 1.100 x 2.000 mm Features: electric steering with timer for adjustment filling volume pneumatic valve with food safe seal on filling nozzle to avoid dripping. product funnel with mixer as-is or adjusted to customer needs

Condition: used, Automatic Bag Filling Line Bag weights from 5kg to 1000kg Fpedpoyq Tb Iefx Ag Dsd Infeed with product de-clumper / product breakup breaker and sieve. Incline screw auger to high level hopper and mixer. Delivery system to bag filler where weighing takes place and metal detection before bag filling point. This system comes with a second mobile screw auger for filling 1000kg big bag / sacks Complete with all the controls for the smooth running of this bagging line. After Bagging the bags are sealed with a Saxon Bag Sealer and then stitched with a Singer Bag Stitcher.

Year of construction: 2021, condition: new, 2021 INFINITY MT500-P MELTING TANK with auger/PUMP never used - new Fsdpfxewu A Ugs Ag Djpd

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 1111254, MACHINE SPECIFICATION Fpedpfxoyrrx Us Ag Djd Table size 660mm x 356mm X axis traverse 508mm Y axis traverse 406mm Z axis traverse 508mm Spindle nose to table 102-610mm Spindle BT40 Spindle speeds 0-8100rpm Spindle motor 14.9kW Rapid feed rate 25.4m/min Toolchanger capacity 20 tools Approximate weight 3220Kg MACHINE EQUIPPED WITH: - Haas (Fanuc compatible) CNC Control Swarf auger Filtermist extraction system 10 off assorted BT40 toolholders Programmable coolant nozzle Automatic lubrication system Lighting Enclosed guarding

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 0500071, SPECIFICATION Table Size 600 x 320mm X axis traverse 450mm Fodpfx Aetylazjg Djpd Y axis traverse 350mm Z axis traverse 380mm Spindle BT40 Spindle Speeds 0-8000rpm Spindle Motor 10kW Rapid feed rates all axes 30m/min Toolchanger capacity 12 Tools Toolchanger change time 8 Seconds Approximate Weight 2000Kg   Machine equipped with:- Siemens 810D Shopmill CNC Control 4th axis unit Swarf auger Lighting Coolant system Enclosed guarding

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 1091950, SPECIFICATION Travel X axis stroke 1626mm Y axis stroke 813mm Z axis stroke 762mm Spindle nose to table (max) 889mm Spindle nose to table (min) 127mm Table Length 1626mm Width 711mm T Slot width 16mm T Slot centre distance 125mm Number of Std T slots 5 Max. Weight on table 1814kg Spindle Maximum rating 22.4kW Maximum speed 7500rpm Maximum torque 610Nm at 500rpm Drive system 2 speed geared head Taper BT50 Bearing lubrication Air/Oil injection Cooling Liquid cooled Feedrate Rapids on X 13.7m/min Rapids Y 15.2m/min Rapids on Z 15.2m/min Max. Cutting feedrate 12.7m/min Axis Motor Fsdpfxst Dmmvj Ag Djpd Max. thrust X 24910N Max. thrust Y 24910N Max. thrust Z 24910N Toolchanger Capacity 30 Maximum tool diameter (adjacent empty) 254mm Maximum tool diameter (full) 102mm Maximum tool length (from gage line 406mm Maximum tool weight 13.6kg Tool to tool (avg) 4.2 sec Chip-to-chip (avg) 6.3 sec General Air required 113l/min, 6.9 bar Weight 10,206Kg MACHINE EQUIPPED WITH:- Through spindle coolant Swarf auger Rigid tapping Hard drive Lighting Enclosed Guarding

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 1105876, SPECIFICATION Table size 914mm x 356mm Maximum table load 1316Kg X axis traverse 762mm Y axis traverse 406mm Z axis traverse 508mm Spindle BT40 Spindle speeds 0 -8,100rpm Spindle motor 14.9kW Rapid feed rate 25.4m/min Toolchanger capacity 24 + 1 tools Tool to toll time 2.8 seconds Approximate weight 3500Kg Fpsdpfxox Sq Sbs Ag Djd MACHINE EQUIPPED WITH: - Haas TRT 160 5 axis trunnion table (removable) Wireless intuitive probing system Remote jog handle Swarf auger High speed machining Programmable coolant nozzle Lighting Guarding Manual Feed cutting time 11,436 hours

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1125318, SPECIFICATION Travel X axis stroke 762mm Y axis stroke 406mm Z axis stroke 508mm Distance spindle nose to table 102-610mm Table Width 536mm Length 914mm Max. Weight on table 1361kg T Slots: width 16mm : pitch 125mm   SPECIFICATION Cont’d Spindle Taper size No.40 Speed 0-8100rpm Bearings Bearing lubrication Air/oil injection Cooling Liquid cooled Motor Spindle motor, max. rating 22.4kW Feedrate Rapid X, Y & Z axis 25.4m/min Max. Cutting feedrate 16.5m/min Toolchanger Capacity 20 tools Type BT40 General Approximate machine weight 3750kg Air supply (min) 113lpm, 6.9 bar MACHINE EQUIPPED WITH: - Fpsdpjwx I N Dsfx Ag Dod Haas (Fanuc compatible) CNC Control system Programmable coolant nozzle Automatic lubrication system Enclosed guarding Swarf auger

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 32 m/min, rapid traverse Y-axis: 32 m/min, rapid traverse Z-axis: 24 m/min, feed length X-axis: 1,050 mm, feed length Y-axis: 540 mm, feed length Z-axis: 560 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 25 kVA, controller manufacturer: Fanuc, controller model: OiMD, workpiece weight (max.): 1,300 kg, total length: 3,300 mm, total width: 2,280 mm, table width: 480 mm, table length: 1,200 mm, table load: 1,300 kg, overall weight: 6,600 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 10,000 rpm, distance table to spindle center: 550 mm, distance table center to spindle nose: 640 mm, spindle motor power: 15,000 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 24, tool length: 210 mm, tool diameter: 75 mm, tool weight: 7 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 2014 Dugard 1000E 3-Axis Vertical Machining Centre – Very Good Condition 2014 Dugard 1000E 3-Axis Vertical Machining Centre in very good condition. Fanuc Oi-MD control, BT40 spindle, 10,000 RPM, 24-station ATC. Available now in Ireland. Machine Type: Vertical Machining Centre (VMC) Manufacturer: Dugard Fpedpfxsyhqhyo Ag Djd Model: 1000E Year: 2014 Control: Fanuc Series Oi-MD Location: Ireland Availability: Immediate Machine Overview Offered by Used Machine Tools Ireland, this 2014 Dugard 1000E Vertical Machining Centre is in very good condition and ready for immediate production. The Dugard 1000E is a highly respected UK-supplied VMC, known for its rigid cast-iron construction, powerful spindle, and reliable Fanuc control system. With generous travels, fast rapids, and a 24-station drum type ATC, it is well suited to both high-mix precision work and production machining. This machine represents an excellent opportunity to acquire a modern, professional-grade 3-axis machining centre with proven reliability and strong resale value. Key Features & Highlights 3-Axis Vertical Machining Centre Fanuc Series Oi-MD Control – industry standard, easy to program BT40 Spindle – strong tooling availability and rigidity 10,000 RPM Spindle Speed 24-Station Drum Type Automatic Tool Changer Rigid Cast-Iron Machine Frame – excellent vibration damping Fully Enclosed Guarding High-Power Cooling System Swarf Auger for Efficient Chip Removal Technical Specifications – Dugard 1000E Control Control System: Fanuc Series Oi-MD Display: 8.4” TFT LCD Colour Monitor Programming: Industry-standard Fanuc format Storage: PC Flash Card Support Axis Travel X-Axis Travel: 1050 mm Y-Axis Travel: 540 mm Z-Axis Travel: 560 mm Spindle Spindle Taper: BT40 Spindle Speed Range: 20 – 10,000 RPM Spindle Drive Motor: 11 / 15 kW Feed Rates Rapid Traverse (X / Y / Z): X & Y: 32 m/min Z: 24 m/min Tool Changer Automatic Tool Changer: 24 Station Type: Drum Type Toolholders: Included as seen in ATC Machine Construction & Equipment Heavy-duty, high-quality cast iron frame Rigid tapping Helical interpolation Automatic lubrication system High-power coolant system Fully enclosed safety guarding Dimensions Machine Footprint: 3300 × 2280 mm Included with Machine ✔ Toolholders included (as currently loaded in the ATC) ✔ Swarf auger ✔ Coolant system ✔ Full enclosure Additional Notes Machine is in very good condition Well-specified and production-ready Specifications supplied in good faith but not guaranteed Ideal Applications Precision CNC milling General engineering & subcontract machining Aerospace, medical, electronics & automotive components Aluminium, plastics, and steel machining The Dugard 1000E is a solid, modern 3-axis VMC offering excellent performance, reliability, and value — an ideal addition to any precision machine shop.

Condition: refurbished (used), Year of construction: 1994, machine/vehicle number: 57228, A Robust industrial meat mincer / grinder Wolfking C250 Uni (1994 model, fully refurbished). Ideal for commercial butchery, food processing, raw pet food production, or small rendering/pre-processing. Key Specs & Features: • Powerful 50HP motor + Guomao ZDY high-torque helical gearbox • Stainless steel auger + double knife setup • Handles fresh meat, frozen blocks, offal and up to ~10 tons/hour capacity (knife set up / material dependent) • Schneider Altivar soft starter (fitted 2024) for smooth start, energy efficiency & protection • Custom 0.75m³ stainless hopper • 400V 3-phase Condition & History: • Purchased 2021; major refurb £9,500 (motor, gearbox, chassis + hopper; receipt included) • 2024 upgrade £1,500 (new soft starter, controls, emergency stop) • Only ~350 hours light use (fresh chicken carcass, lungs, liver, hearts) – never maxed out • Meticulous maintenance: 3-month gearbox oil changes, food-grade grease post-use Inclusions: • Spare sizing plates & knives • Screw cap tool • Stainless spout/hood guard • Full pre-sale check Fsdsuh Sciopfx Ag Dspd Dimensions (with hopper): Height 2.3m | Width 1.85m | Length 2.1m | Weight ~1250–1350kg Price: £15000 + VAT (if applicable) Delivery: Included anywhere in England; export to EU/Germany possible (quote on request) Serious buyers only – viewing in Halifax, England welcome (virtual or in-person). Photos, 4 min walk around video, or more details on request. Perfect upgrade for butchers, processors, or raw pet food makers needing reliable industrial meat grinder performance. Contact for questions or to view!

Condition: good (used), Year of construction: 2000, MORI SEIKI SH-503/40 TWIN PALLET CNC HORIZONTAL MILLING MACHINE WITH MORI SEIKI MSX-502III CONTROL UKUK Pallet Dimension 500 x 500mm. Maximum Table Load 1,000kg. Axis Travel X'=630mm, 'Y'=600mm, 'Z'=650mm, 'B'=1° Increment. Rapid Traverse 'X,Y,Z'=32m/min. Spindle Taper BT40. Maximum Spindle Speed 12,000rpm (22kW Motor). 120 Position ATC. Maximum Tool Ø150mm (Without Adjacent Tools), Maximum Length 360mm, Maximum Tool Weight 12kg. S/No. 1212 (2000). DESCRIPTION With Renishaw OMP 600 Spindle Probe, Blum Laser Tool Setting/Breakage Unit, Dual Auger To FSE Chip Conveyor, Through Coolant Filtration System, Oil Chiller, Filtermist Mist Extraction Unit, Handwheel & Signal Tower. Overall Dimensions L4,500 x W2,725 x H3,267mm. Weight 14,900kg. Note: Tooling & Tombstones Not Included. Fpsdpfx Agsxqt Tio Dsd

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, This 5-axis HAAS VF 2 SS YT vertical machining center was manufactured in 2020. Ideal for precision machining, it offers robust construction and advanced control technology. If you are looking to get high-quality milling capabilities, consider the HAAS VF 2 SS YT machine we have for sale. Contact us for more information. Additional equipment • Type: Side-Mount (SMTC)/ Capacity: 30+1/ Max Tool Diameter (full): 64 mm/ Max Tool Diameter (adjacent empty): 127 mm/ Max Tool Length: 279 mm /Max Tool Weight: 5.0 kg • Tool-to-Tool (avg): 1.80 s/ Chip-to-Chip (avg): 2.40 s • Included: HRT210 Machine Benefits Technical Machine Benefits • Torque: 122 nm at 2000 rpm • Drive system: inline direct-drive • Taper: bt40 / ct40 / hsk-a63 • Lubrication: air/oil injection/cooling: liquid-cooled • Max cutting feedrate: 21. 2 m/min / rapids on x, y, z-axis: 35. 6 m/min • Coolant tank capacity: 208 l / through-spindle coolant pressure: 21 bar / through-tool air blast: yes / chip auger: yes / chip tray filter kit: yes / window air blast: yes / coolant pump: multi-stage • Air consumption: 113 l/min at 6. 9 bar / minimum air pressure: 5. 5 bar / air hose connection: 3/8 in • Standard interface: ethernet and wifi / control memory: 1 gb / remote monitoring: haasconnect / high-speed machining: included / advanced tool management: included /media display (m130): included / power failure detection: included /safe run function: included / rigid tapping: included Fpjdpfx Agoyaix Uj Djd

Condition: ready for operation (used), Year of construction: 2021, This 3-axis Hurco VM 10i was manufactured in 2021, featuring advanced capabilities like MAX5 control with dual 19" LCD displays, Ethernet and USB interfaces, and a solid-state drive for enhanced performance. It includes high-pressure coolant systems through the spindle, integrated hydraulic tool clamping, and a chip auger for efficient chip management. Consider the opportunity to buy this Hurco VM 10i vertical machining centre. Contact us for more information about this machine. • Includes MAX5 control with detachable electronic handwheel • 2 × 19" LCD color displays (text + graphics) • Network interface • 2 software units for programming • Internal self-diagnostics • Windows platform • Integrated hydraulic tool clamping system • Cooling flood through spindle with ICS (20 bar) • High-pressure cooling flood system • Spindle cooler • Chip auger • Chip splash guard cabin • LED machine light in the work area • Indicator light for machine operating status Fpodpfsx H A I Rox Ag Djd • Trochoid milling cutter function for higher machining performance • Tool and workpiece measurement • Collision protection with islands • Synchronous thread cutting • ISNC extended NC mode

Condition: ready for operation (used), Year of construction: 2017, operating hours: 5,300 h, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, controller model: NGC, table width: 1,219 mm, table length: 457 mm, table load: 1,588 kg, spindle speed (max.): 8,100 rpm, number of slots in tool magazine: 20, number of axes: 3, This HAAS VF-3 vertical machining center, manufactured in 2017, offers strong milling performance with a large 1219 × 457 mm table and a load capacity of 1588 kg. It is equipped with an 8100 rpm spindle and includes a chip conveyor as well as a through-spindle coolant 21 bar option. The machine is in excellent technical condition. If you are looking for high-quality milling capabilities, consider the HAAS VF-3 we have for sale. Contact us for more information. • Table size: 1219 x 457 mm • Tool magazine capacity: 20 tools • Stepless spindle speed control Additional equipment • AUGER – Screw-type chip conveyor • WIPS-R – Wireless probe system • ACF – Additional 25 μm filtration system • TSC – Through-spindle coolant with high-power pump (21 bar) • Documentation / operating manual Technical Specification Fpedpfxox D Hpdo Ag Dod Taper Size ISO 40 Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2018, operating hours: 7,931 h, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, number of axes: 3, This 4-axis HAAS VF-3SSYT with HRT 210 4X was manufactured in 2018. It features a 12,000-rpm spindle, 30+1 side-mount tool changer, and through-spindle coolant at 300 psi. The machine includes a 4th-axis drive, wireless probing system, and high-speed machining capabilities. If you are looking to get high-quality milling capabilities, consider the HAAS VF-3SSYT machine we have for sale. Contact us for more information about this machine. Additional equipment • High-Speed 30+1 Side-Mount Tool Changer / Advanced Tool Management / Early Power-Failure Detection Module / Multi-Stage Coolant Pump / Rigid Tapping Safe Run / Media Display M-Code; M130 / Power Surge Protection / Window Air Blast / Visual Part Programming System / User-Definable Macros / Spindle Orientation / Coordinate Rotation and Scaling / Chip Tray Filter Kit / CT-Style Tool Changer Grippers / Through-Spindle Coolant, 300 psi (21 bar) / 4th-Axis Drive and Wiring / Wireless Intuitive Probing System / Chip Auger / Programmable Coolant Nozzle / High-Speed Machining / Large Remote Jog Handle with Touchscreen Display / High-Volt Transformer, Non-USA Machine Benefits Technical Machine Benefits • Spindle speed: 12000 rpm Fsdpfoyalh Esx Ag Depd • Standard program memory: 1 gb / control widescreen monitor • Remote monitoring: haasconnect / ethernet interface / wifi connection for the haas control • HRT rotary table is available for additional 9.000€.

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag SR 25 BT / RH 18 on Sennebogen SR25 with ABI MDBA 3500 Soil Improvement Rig | Used Drill | 5834 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 220000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine is used for concrete pile drilling, soil improvement, and vibration tamping. The carrier vehicle is a Sennebogen SR25BT (built in 2008) with a Delmag RH18 drilling attachment (built in 2009). The drill table lift is 12.50m, total height is 19.91m. The outreach is 3.165 - 4.00m. It includes a winch for the feed with freewheel, auxiliary winch, and rear platform. The drill table is an SHT25, and the KDK rotary drilling head BT180-2 is not included. The machine is purely a soil improvement device, equipped with a MBDA 3500 ABI drill gearbox. It has a single auger. No Kelly bar is included. It features mast support cylinders and alignment automation. The hydraulic telescopic undercarriage has a width that adjusts from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at 3,304 operating hours. Drills and drill accessories are available separately. Also available is a mobile mixing plant, manufactured by MAT, which includes a mixing container (throughput capacity of 20m3/h), a conveyor screw, a mixing container (capacity 4,000l), and a plunger pump with remote control. The machine’s condition corresponds to its operating hours. During the inspection in 2023, the machine was running and functioning without any issues. As of October 2024, wear and tear have occurred on the valves, controls, and hydraulic hoses. It is not possible to operate the machine with two attachments simultaneously. The machine shows wear on bolts, bushings, and general usage marks (dents, scratches, etc.) consistent with its age, operating hours, and usage. The machine was not tested under load. It has been used with 55 and 80 paddles. After service and maintenance of the wear and tear, the machine will be ready for operation. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33244 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options Fpjdpfjx Uyzqsx Ag Dod 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 1105842, SPECIFICATION Table size 914mm x 356mm Maximum table load 1361Kg X axis traverse 762mm Y axis traverse 406mm Z axis traverse 508mm Spindle BT40 Spindle speeds 0-8100rpm Spindle motor 14.9kW Rapid feed rate 25.4m/min Toolchanger capacity 24 +1 tools Tool to tool time 2.8 seconds Fsdpfx Ajykqtzog Depd Approximate weight 3500Kg MACHINE EQUIPPED WITH: - Haas TRT 160 5 axis trunnion table (Removable) Wireless intuitive probing system Remote jog handle Swarf auger High speed machining Programmable coolant nozzle Lighting Guarding Manual

Condition: new, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,000 mm, table length: 3,000 mm, table width: 1,700 mm, spindle speed (max.): 6,000 rpm, rapid traverse X-axis: 24,000 m/min, rapid traverse Y-axis: 24,000 m/min, rapid traverse Z-axis: 24,000 m/min, table load: 10,000 kg, position of the milling head: Vertikal, workpiece weight (max.): 10,000 kg, torque: 1,392 Nm, overall weight: 30,000 kg, spindle nose: SK 50 - DIN 69871/A, spindle motor power: 53 W, Equipment: rotational speed infinitely variable, Brand new gantry milling machine Control and motors: HEIDENHAIN TNC 640 digital path control HEIDENHAIN TFT 19" screen HEIDENHAIN package: motors, measuring systems, handwheel IKZ: Internal coolant supply, 70 bar Additional equipment: 60-position chain-type tool changer with double gripper Double auger conveyor (longitudinal) Hinged belt chip conveyor (transverse) Preparation for 4th axis (rotary table) Fully enclosed, top closed Accuracies: Positioning accuracy: ±0.035 mm Fpedpfx Aohy Avpeg Ded Repeatability: ±0.028 mm Only inquiries from Germany will be answered // Nur Anfragen aus Deutschland werden bearbeitet

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, This is the Haas equivalent of the Fanuc Robodrill and very impressive it is! Shown running on our race car components, we can help with training and setup if required pictures show components we are currently making on the DM2 5th Axis enabled 4th axis Interface, 5th axis Interface, Coolant, Interlocked guards, High speed machining enabled Low Volt Light, Programmable Coolant Nozzle, Remote Hand Wheel, Swarf Auger, Through Spindle Coolant, USB Port Control Fpsdpfsydil Nsx Ag Djd HAAS Machine Dimensions 2811 x 2463 x 2583mm Machine Weight 2427kg Max & Min distance from table to spindle 152 - 546mm Maximum Cutting Feedrate 30.5m/minute Maximum Tapping Capacity M12 (Aluminium) Maximum Tool Diameter 64mm Maximum Tool Diameter with Empty Adjacent Pockets 64mm Maximum Tool Length 178mm Maximum workpiece weight 113kg Memory 1Gb Rapid Feedrates 61m/minute Spindle Motor Power 40HP Spindle Speed 15000rpm T- Slots 3 x 16mm Table Size 864 x 381mm Tool Change Capacity 18 + 1 Tool Change Time (Chip to Chip) 1.6 seconds Tool Size BT40 Traverses XYZ 711 x 406 x 394mm

Condition: used, Foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil or parchment paper. This machine is in a reasonable mechanical and electrical condition (renewed by Schuy, auftr. nr: 13632-01). The format on the machine is Standard size: 250 gram, 100 x 75 x 35 mm, bottom folding. Capacity: up to 50 portions per minute. The butter is feed with an aluminium through with aluminium augers. Aluminium dosing station. The machine is equiped with a later build on photocell on the paper infeed, to control the exact position of the print on the foil. Outfeed conveyor. Manufacturer: Benhil Model: 8312 Junior Butter Pack Format: 100 x 75 x 35 mm Condition: Used Serial Number: 312/57 Type of Machine: Butter Packaging Machine Fpjdexx Sfgopfx Ag Ded Capacity: ± 750 Kg/h Packaging Weight: 250 gram Packaging type: Bottom folding Motor power: 2,2 kW Weight: ± 1.275 kg

Condition: used, Benhil Stand Alone Butter Hopper with temperature control outlet with warm water circulation. This machine is used for handling butter or feeding machines with direct feed competitions units. This has twin screw augers with in the hopper and on the outlet there are connections for hot/warm water circulation would you need to regulate the temperature of the product. The throughput is at 2000 kg per hour . The hopper is capable of receiving 25 kg blocks of butter at 8-10 degrees . Capacity: 2000 kg/hr Conditions of sale: “As is” or “Refurbished “ Hopper: Twin Screw Drive: Self driven by motor and belt with reducer Outlet: Double jacket outlet for temperature Control Fpodpfx Ajyc Tviog Dod Location: In stock

Condition: new, functionality: fully functional, gearing type: automatic, fuel type: diesel, operation weight: 1,850 kg, drive condition: 100 %, chain condition: 100 %, number of seats: 1, shovel volume: 0.025 m³, Year of construction: 2025, operating hours: 5 h, Equipment: adjustable chassis, cabin, hydraulics, parking heater, rubber tracks, HT20 PRO Mini Excavator – 2.0 t | Cabin • Air Conditioning • Top Equipment Act now! The HT20 PRO stands out as a powerful, premium mini excavator in the 2.0-ton class, designed for professional applications in construction, landscaping, and municipal operations. Compact, powerful, and reliable – delivering maximum performance in confined spaces. ⭐ YOUR ADVANTAGES AT A GLANCE ✔ Original Kubota Engine – durable & economical ✔ Precise load-sensing hydraulics ✔ Enclosed comfort cabin with heating & air conditioning ✔ Adjustable undercarriage – ideal for narrow construction sites ✔ Robust premium steel construction ✔ Ready for immediate use from stock ⚙️ ENGINE Kubota D902, 3-cylinder diesel Output: 11.8 kW Very low fuel consumption Smooth and low-vibration operation HYDRAULICS Two-stage cast hydraulic pump Load-sensing valve Travel motor with 2 speeds Reinforced hydraulic lines WORK PERFORMANCE Side-swing boom (left/right) Digging depth: 1,995 mm Reach: 3,130 mm Dump height: 1,930 mm UNDERCARRIAGE & STABILITY Variable track width: 970 – 1,270 mm Undercarriage made of manganese steel Fodex Hvvhspfx Ag Depd Cast iron counterweights Rubber tracks with 3-ply steel cord Gradeability up to 30° COMFORT FEATURES ✔ Enclosed cabin ✔ Air conditioning & heating ✔ Ergonomic joystick controls ✔ LED work lights ✔ Comfort seat ✔ Excellent all-around visibility INCLUDES – 3 ATTACHMENTS ✅ 20 cm trenching bucket (replaceable teeth) ✅ 50 cm digging bucket ✅ 100 cm grading bucket ➡️ Ready to go for any job site! ➕ OPTIONAL AT EXTRA COST ✔ Hydraulic quick coupler (The hydraulic quick coupler shown in the images is not included as standard and is available separately) ✔ Hydraulic auger set up to Ø 300 mm (150 / 200 / 300 mm + extensions) SERVICE & WARRANTY Maintenance every 250 operating hours or annually 12-month warranty throughout Europe Spare parts & service directly from Rheda-Wiedenbrück warehouse IMMEDIATELY AVAILABLE ✔ Machine in stock ✔ Ready for operation upon delivery ✔ Europe-wide delivery possible CERTIFIED & SAFE CE certification 2006/42/EC | 2014/30/EU | 2011/65/EU ⭐ PROMOTIONAL NET PRICE: €14,900 ⭐ Location: Rheda-Wiedenbrück Viewing by appointment ONLY FOR A LIMITED TIME – PRICE NEGOTIABLE! Enquire now and secure your advantage!