Used Auger Drill for sale (5,211)

Condition: excellent (used), Year of construction: 2003, column diameter: 400 mm, drill diameter: 65 mm, Drilling ; Tapping in all directions Can be moved in 7 axes Fast preparation, accuracy and performence on heavy and bulky parts. Field using Turbines, Generators, Compressors, Steel Construction, Boilers Containers, Chemoical equipment, furnces of cement work and shipbuilding Arm Length: 2070mm Nsdpeyub Spofx Agwskw Max. drill Ø cast: 65mm Max. tap Ø: 48M Stroke pinole: 350mm Max. distance spindle - table:1550mm Min. distance spindle - table:305mm Speeds / ranges: 900Rpm Spindle Taper: 5ISO/Bt/Mk Column sleeve: 400mm Power: 4kW Max. drill Ø steel: 50mm Length: 3500mm Width: 1325mm Height: 3400mm Weight: 6570kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), machine/vehicle number: 331/43, drilling capacity: 3 mm Nedpfx Agefnbgqewekw throat: 100 mm spindle turning speed range: 6300/9000 rpm engine: 380 V, 0,18 kW space needed: 470 x 250 x 520 mm weight: 39 kg

Condition: new, machine/vehicle number: 37 R9633-2, Drill-Ø with twist drill up to: 13 mm Drill-Ø with crown drill up to: 35 mm drilling stroke: 115 mm drive power: 680 W Njdpsc N T Hrjfx Agwekw electrical connection: 220/240 V magnetic base dimensions: 92 x 172 mm weight: 13 kg

Condition: good (used), for spindle taper: MK 3 Nodpfx Aod R Atcegwskw Drilling Ø: 10 mm Thread cutting: M 5 / M 8 min./max. Spindle distance: 35/120 mm Case diameter: 170 mm Case length: 218 mm weight:

Year of construction: 2004, condition: ready for operation (used), Drill-Ø: 13 mm spindle mounting: B 16 Speed with changeover for left and right: 0 - 840 rpm power input: 450 W Nkjdpfx Agod D Th Howew for alternating current: 230 V

Condition: used, Drilling jig on base plate with three-jaw chuck as well as 2-fold height-adjustable and horizontally movable holder for a drilling machine. Consisting of: Three-jaw chuck AROWA, 250 mm Ø, horizontally rotatable by 380° with scale as well as indexing and clamping. Basic frame for holding a drilling machine guided on 2 columns and adjustable in height by means of a spindle, on it in horizontal plane around 120 mm with scale adjustable admission. Nkjdpsc U U Udsfx Agwew On top of this, again on a round column, basic height adjustment on the column with clamping. Round guide with rack and lever for drill feed, stroke 100 mm. Space requirement over all: 600 x 400 x 850 mm high weight:

Condition: used, drilling capacity steel/GG: 30/40 mm spindle taper: 3 MK arm length: 350 mm table size: 350 Ø mm spindle sleeve stroke: 150 mm Nkedpjb Hl H Iefx Agwsw spindle turning speed range: 155; 280; 470 u. 790 rpm carriages: 0,1/0,2/0,3 mm engine: 380 V, 1,1 kW space needed: 950 x 530 x 2300 mm weight: 445 kg

Year of construction: 1956, condition: used, machine/vehicle number: 6255, drilling capacity steel/GG: 23 mm spindle taper: 2 MK arm length: 300 mm table size: 300 x 300 mm Njdpfxjbn Ak Us Agwekw spindle sleeve stroke: 100 mm spindle turning speed range: 190 - 1500 rpm engine: 380 V, 0,5/0,75 kW space needed: 410 x 670 x 1950 mm weight: 180 kg

Condition: good (used), drilling capacity: ca. 13 mm spindle taper: B 16 MK throat: 250 mm table size: 220 x 325 mm spindle turning speed range: 350 - 1500 u. 750 - 3000 rpm engine: 380 V, 0,3/0,4 kW space needed: 680 x 400 x 1670 mm Nkjdpjd In Sfjfx Agwsw

Year of construction: 1985, condition: excellent (used), machine/vehicle number: 2476, for spindle taper: MK 4 Max. Input speed: 1500 rpm Njdod R Em Iepfx Agwskw Diameter up to: 10.2 mm Shank Diameter for quill: Construction height: 500 mm Weight:

Year of construction: 1970, condition: used, machine/vehicle number: 12901, drilling capacity steel/GG: 50/60 mm spindle taper: 5 MK arm length: 400 mm table size: 700 x 600 mm spindle sleeve stroke: 275 mm Njdpfx Agey R Thswekw spindle turning speed range: 32 - 1030 rpm carriages: 4: 0,1 - 0,4 mm engine: 380 V, 2,2/3,7 kW space needed: 700 x 1200 x 2700 mm weight: 1240 kg

Condition: new, Drill head E-150 Nksdpodkg Rmjfx Agwsw working range: 120 - 150 mm with shank: MK 5 with cooling ring cutting blades consisting of material HSS-E-PM ASP 30, ASP30 TiN, centre drill HSS

Condition: used, Drilling capacity: 35/40 mm Spindle mount: MK 4 throat: 230 mm Table size: 1050 x 625 mm Table height above floor: 560 mm small / large distance between table and drilling sleeve: 549/960 mm quill stroke: 170 mm spindle speed infinitely variable: 50 - 800 rpm Njdpfx Ageb N Ahlswjkw space requirement: 1050 x 1000 x 2170 mm Weight: 250 kg

Condition: used, drilling capacity steel/GG: 15 mm spindle taper: 1 MK arm length: 300 mm table size: 210 x 300 mm Nksdevxpp Hjpfx Agwsw spindle sleeve stroke: 110 mm spindle turning speed range: 200 - 3000 rpm engine: 380 V, 1,1 kW space needed: 850 x 420 x 1860 mm weight: 220 kg

Condition: used, Year of construction: 1971, drilling capacity steel/GG: 23 mm spindle taper: 3 MK arm length: 275 mm table size: 300 x 400 mm spindle sleeve stroke: 90 mm spindle turning speed range: 100 - 1180 rpm carriages: 0,1/0,6/0,25 mm Nsdporz Nqajfx Agwokw engine: 380 V, 1,25/2,15 kW space needed: 850 x 400 x 1770 mm weight: 280 kg

Condition: good (used), Year of construction: 1989, for twist drills: 3 - 50 mm Ø Point angle: 90 - 140° Nsdpfx Ajx Ea Nmegwskw Adjustable relief angle Grinding motor: 2800 rpm, 0.25 kW Gear motor for swing motion: 0.12 kW Grinding wheel dimensions: 175 x 32 x 20 / 90 x 20 mm Space required: 800 x 550 x 1140 mm Weight: 120 kg

Condition: ready for operation (used), Drilling capacity steel/GG: approx. 25 mm Spindle mount: 2 MK Thrust: 300 mm Table size: 305 x 380 mm Quill stroke: 115 mm Spindle speeds: 200 - 1200 rpm Drive motor: 380 V, 1/1.5 kW Space required: 800 x 400 x 1800 mm Nedpfx Agsv Du Rajwskw Weight: approx. 280 kg

Condition: ready for operation (used), Year of construction: 2006, Speeds up to: 2250 rpm Nkedpsyfgd Esfx Agwew Feed rate: 0 - 300 mm/min Drive power per motor: 2.9 kW Electrical connection: 400 V Weight: 395 kg Required space: 4100 x 1670 x 1450 mm

Condition: excellent (used), Year of construction: 1991, Drilling diameter in St 60/GG 20: 28/32 mm Spindle taper: MT 3 Throat: 250 mm Spindle stroke: 120 mm Nkjdpfjyk T A Eox Agwow Table size: 400 x 415 mm Maximum distance between table and quill: 665 mm Spindle speeds: 140 - 2000 rpm Drive motor: 380 V, 1.1/1.3 kW Weight: 210 kg Space requirements: 800 x 420/600 x 1790 mm

Year of construction: 1984, condition: ready for operation (used), drilling capacity steel/GG: 18/23 mm spindle taper: 2 MK arm length: 250 mm table size: 250 x 370 mm spindle turning speed range: 400 - 5000 rpm Nkjdpfx Agjk Tzu Rswow engine: 0,48/0,6 kW space needed: 750 x 500 x 1670 mm weight: 130 kg

Condition: good (used), table mounting size: 400 x 1500 mm table movement x: 1130 mm table movement y: 320 mm table movement z: 430 mm spindle taper: ISA 50 spindle turning speed range: Horizontal-/Vertikalspindel 32-1500/25-1200 rpm carriages longitudinal and cross: 15 - 600 mm/min Nkodpfx Agjg A Inwowsw carriages vertical: 6 - 240 mm/min space needed: 2500 x 2200 x 1900 mm weight: 3000 kg

Condition: used, Year of construction: 1981, Working width 1200 mm Power (kW) 6 kW Working depth 130 mm Nkodpfxewnhcio Agwew Thickness 50 mm Radial drilling machine, radial drilling machine Manufacturer: MAS Kovosit Type: VO 50 Arm length: 1600mm Drill length: 1200mm Drill depth: 130mm Capacity: 50 / 60mm Spindle speed: 28-2500 rpm Intake: MK6 Motor power: 6kW T-slot bottom: 1500x1000mm Machine-afmeting: 2900x1200x3000mm - Year: 1981 - Documentation available: No - CE certificate present: No - Serial number: 50 / 1600 - Power [kW]: 6 - Arm length [mm]: 1600 - Drilling depth [mm]: 130 - Drilling capacity [mm]: 60 - Tool holder: MK6 - Min. spindle speed [rpm]: 28 - Max. spindle speed [rpm]: 2500 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1973, total width: 720 mm, total length: 2,300 mm, total height: 2,700 mm, Empty weight: 3.000 kg Nkedpfjx Igczex Agwow - Year: 1973 - Documentation available: Yes - CE certificate present: No - Serial number: 95361 - Drive system: Conventional - Power [kW]: 3.5 - X-axis travel [mm]: 1000 - Table length [mm]: 750 - Table width [mm]: 600 - Drilling depth [mm]: 330 - Drilling capacity [mm]: 40 - Max. Reach [mm]: 1300 - Tool holder: MK4 - Min. spindle speed [rpm]: 28 - Max. spindle speed [rpm]: 1120 - Transport dimensions: 2300mm x 720mm x 2700mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1986, - Year: 1986 - Documentation available: No - CE certificate present: No - Serial number: 2181 - Drive system: Conventional - Power [kW]: 4 - X-axis travel [mm]: 1600 - Table length [mm]: 1020 - Table width [mm]: 750 - Drilling depth [mm]: 130 - Drilling capacity [mm]: 2 - Max. Reach [mm]: 1600 - Min. spindle speed [rpm]: 28 - Max. spindle speed [rpm]: 2500 Financial information Nodpfewnh Rtsx Agwekw VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total width: 1,000 mm, total length: 2,200 mm, total height: 2,500 mm, Empty weight: 2.500 kg Nedpfx Ajwnilxsgwjkw - Documentation available: No - CE certificate present: No - Drive system: Conventional - Power [kW]: 6 - Y-axis travel [mm]: 1000 - Table length [mm]: 1300 - Table width [mm]: 600 - Drilling depth [mm]: 150 - Drilling capacity [mm]: 32 - Max. Reach [mm]: 1000 - Min. spindle speed [rpm]: 30 - Max. spindle speed [rpm]: 2650 - Transport dimensions: 2200mm x 1000mm x 2500mm (l x w x h) - Transport weight [kg]: 2500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum