Used Attachment Frame for sale (12,969)

Condition: new, pressure: 150Tappet adjustment: (automatische Verstellung) 40stroke lenght (max.): 10-125total power requirements: 15weight approx.: 9500messurements (LxWxH): 1800 x 1500 x 2600Stroke/min: 50-90 Machine Technical SpecificationsCE Compliance: The machine and all equipment are manufactured in accordance with CE regulations Light Curtains: SICK or PILZ PLC Control: Siemens S7-1200 Stroke Adjustment: Directly via the touchscreen interface Balancing System: Integrated Stroke Speed Adjustment: Via Mitsubishi frequency inverter Machine Frame: Full steel construction Guidance System: Inner and outer eccentric guides Crankshaft: Made of hardened 4140 steel Clutch & Brake: Pneumatic combination system Safety Valve: Dual-way safety valve Safety PLC: SICK or PILZ Operation Modes: Two-hand operation and foot pedal available Lubrication: Automatic centralized lubrication system Overload Protection: Hydraulic overload system Safety Guarding: Protective enclosure around the working area External I/O: 8-pin I/O ports on PLC (for external connections and signal exchange) Anti-Vibration: Rubber dampers under the machine feet (1 pair – 4 pieces) Power Supply: 400 V / 50 Hz Required Fuse: 32 A Control Panel: 19 Siemens touchscreen ? Main Technical DataOperation Modes: Inch / Single stroke / Continuous stroke Press Force: 150 tons Table Dimensions: 750 × 1000 mm (fixed table) Stroke Length: 10–125 mm (automatically adjustable via PLC) Ram Dimensions: 500 × 800 mm (Ø55mm pin receptacle & T-slots customized to customer needs) Stroke Rate: 50–90 strokes per minute Main Motor: 15kW (1,400 rpm) Throat Depth: 325 mm Shut Height: 475 mm (adjustable down to 295 mm) Ram Bore Diameter: 50 mm Machine Dimensions:Length: 1,800 mm Width: 1,500 mm Isdpfstqwtdox Ag Doa Height: 2,600 mm Machine Weight: approx. 9,500 kg Ram Adjustment: 40 mm (automatic adjustment)

Condition: new, Steel Frame Automatic Nailing Bridge A fully automatic nailing station for nailing or stapling sheet materials in accordance with the design specifications including the following functions: ​ 1. Nailing or stapling of sheeting 2. Routing of openings or overhangs 3. Application of breather membrane 4. Nailing or stapling of battens ​ Specification Full PC control with 17” touch screen Interactive display of operation being performed Automatic download from drawing software. Heavy duty tables with one fixed side and one moving side 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished 1300mm minimum panel height Maximum panel height up to 3.5m (optionally extendable) Maximum panel length 6m – optionally up to 13m 400mm wide heavy duty work tables 825mm working height 300mm maximum panel thickness (optionally 5000mm) Motorised table opening with automatic brake locking Bridge mounted with one nailing / stapling tool mounting as standard. (Options for 2 or 3 nailing tool mounts) Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail & Mitek. Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Optional electrically driven sheet feeding system, including automatic sheet feeding and height indexing of the support table. Optional router unit with 4kw motor - servo drive controlled Optional Equipment ​ Table with rails mounted for bridge Additional price per meter for table with rails mounted Independent rails to travel 8m over one 6m capacity table (16m of rail in total) Additional price per meter of rail Isdpfx Aedzc Rxsg Dea Working table for holding panel 6m (no rails mounted) Additional price per meter for table Motorised chains rather than manual rollers - initial cost Price per meter for motorisation Baton positioning guiding arrangement Additional tool mount Paper roll clamp, holder and software Electric paper cutting Panel thickness of 500mm Saw blade in X, Y, Z & C axes 350mm max panel thickness Saw blade in X, Y, Z & C axis 500mm max panel thickness. Inclination of the sawblade to one fixed angle Router complete with frequency inverter, mounted on the bridge for routing out openings in the panels. Complete with software controls and dust extraction.

Condition: like new (used), mileage: 66,000 km, power: 117.68 kW (160.00 HP), fuel type: diesel, axle configuration: 4x2, maximum load weight: 3,500 kg, first registration: 10/2020, loading space length: 4,420 mm, loading space width: 2,170 mm, loading space height: 2,100 mm, emission class: euro6, color: white, number of seats: 3, Equipment: ABS, air conditioning, airbag, central locking, onboard computer, spoiler, GUARANTEED USED VEHICLE!!! Contact: For more information call: 3441197960 – 030933077 Franco / Nicola Follow us on Facebook and Instagram. Specifications: EXCELLENT MERCEDES SPRINTER 416, 160 HP, CURTAIN-SIDE BODY WITH SLIDING TARPAULINS Usable length: 4420mm – Usable width: 2170mm – Usable height: 2100mm Included features: ABS, Airbag, Electric windows, Car radio, On-board computer, Central locking, Traction control, Air conditioning, ESP, CD player, MP3, Air-suspended seat, Power steering, Steering wheel controls. Rossini Service: Founded in 1960 as a FIAT / OM workshop, since 1992 Rossini Service has been an ISO-certified, authorized IVECO service center. Our skilled and specialized staff have decades of experience in the repair and servicing of passenger cars and commercial vehicles of any make. Every Rossini Service vehicle is thoroughly inspected and prepared before delivery. Iodpfjxyp Tdox Ag Doa

Condition: ready for operation (used), total height: 2,140 mm, total width: 865 mm, total length: 1,665 mm, passage width: 1,100 mm, power: 2.2 kW (2.99 HP), empty load weight: 970 kg, load capacity: 100,000 kg, Arlo 100 T / 1000 Vario Max ram adjustment: 380 mm Drawningspeed: 7,54 mm/sec Workingspeed: 2,47 mm/sec Iedpexc Rbbjfx Ag Doa Returningspeed: 9,06 mm/sec

Condition: ready for operation (used), Year of construction: 1975, functionality: fully functional, machine/vehicle number: 700002/044, Wurster & Dietz gang saw system type GDZ GE S, year 1975, M.-Nr. 700002/044 Splitting wedge, W&D hydraulic clamping carriage with auxiliary carriage and rail Round log infeed with singulator, log carriage with log ejector Gang saw roller conveyor with lifter/extractor Approx. 40 conveyor rollers, each approx. 1.60 m wide, not driven Shaker chute for gang saw waste onto the conveyor belt Isdpfx Aexvq T Djg Doa Electrical control cabinets, control boxes, and operator panel With spare parts inventory and Vollmer gang saw blade sharpening machine

Condition: used, functionality: unexamined, Maweg Euronova S Hydraulic Frame Clamp Iedpfxsw Tm Akj Ag Dea

Condition: used, Slat Guillotine Cutting with knives The ideal machine for those producing picture frames Ijdpoh Ab H Ajfx Ag Dsa Control of the machine by pedal

Condition: new, Lifting /Turnover ("Butterfly") Device for raising panels from horizontal to vertical position or for turning over of panels to enable the fitting of insulation, or the nailing on both faces of a panel. A pair of hydraulically operated tables (also known as a butterfly table) that enable the panels to be brought to the vertical position, passed to the 2nd table, and safely lowered back down on the opposite side for fitting of insulation and closing of the panel. There is an option to have pneumatically operated pop up idle roller tracks fitted in the table, for easy loading and unloading the panels. The hydraulic lifting of the tables is controlled by push button operation 3,5kw motor 6m standard length (optional 12m) 4m maximum panel height Iedpfxsdzc Rfj Ag Doa Optional side and end stops for floor cassette assembly

Year of construction: 1999, condition: excellent (used), 1. Linck FWK Quick Clamp Carriage Gauge: 900 mm Travel speed forward/reverse: 80/180 m/min Clamp opening: 750 mm Log length: 2.5–13.5 m Log diameter: 150–700 mm 2. Linck CV1/SE 600 Full Frame Saw with Variable Width Adjustment Passage width: 760 mm Passage height: 710 mm Saw stroke: 600 mm 3. Removal Device Bm 1/Mbh 4. Side Material Cross-Cut Saw Linck KA 1/ACF Year of manufacture: 1998. Commissioned: 2000 Iodjxtwv Tepfx Ag Dsa Various tools Sale by customer order.

Condition: ready for operation (used), total height: 4,900 mm, total width: 5,900 mm, total length: 8,500 mm, passage width: 3,900 mm, power: 11 kW (14.96 HP), empty load weight: 85,000 kg, load capacity: 400,000 kg, Portaalrichtpers 400 ton Voor het gericht van assen, gietstalen producten, gewalste producten, smeedstukken met vrije matrijs, vlak staal maar ook voor het in- en uitpersen van lagers, bussen, krimpringen,... 14 individuele tegendrukcilinders in de tabel - 3 ton dop per cilinder - 100 mm slak per cilinder - Druk 300 kg/cm² - Doorgang tussen de staanders: 3990 mm Werksnelheid – bij max. druk: 2 mm/sec Terugloopsnelheid: 50 mm/sec Sluitsnelheid: 30 mm/sec Max ram adjustment: 1550 mm Drawningspeed: 30 mm/sec Workingspeed: 2 mm/sec Returningspeed: 50 mm/sec Ijdjxcqkpjpfx Ag Dja Max distance between table - ram: 1550 mm Dimensions of the table: 7000 x 3200 mm

Condition: new, Bernardo Frame Press HRP 3000 Robust and torsion-resistant hydraulic frame press with high-quality pressure cylinders. Whether it is used for furniture or door production, block or frame gluing, the high pressing force of 2,000 kg per cylinder and precise, angle-accurate pressing of large-sized components enable all tasks to be carried out effortlessly. Technical Specifications Working length: 2,400 mm Working height: 1,550 mm Cylinder stroke: 95 mm Pressing force: 2,000 kg Vertical hole pitch: 50 mm Horizontal hole pitch: 160 mm Overall length: 3,250 mm Overall height: 2,070 mm Frame depth: 925 mm Weight: approx. 315 kg Features • Versatile use, e.g. for frame, window, and door production • Robust frame press with solid steel construction • Centralized control of the hydraulic cylinders including pressure gauge • Efficient gluing thanks to hydraulic design • Pressure cylinders equipped with rocker plates as standard Scope of Delivery Isdpfoxrnvbex Ag Dsa • 4 movable pressure beams, each with one vertical hydraulic cylinder and counter support • 1 movable pressure beam with two horizontal hydraulic cylinders • 1 movable, adjustable pressure yoke

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, Artos Latex Line Hermosa Year of construction: 2000-2021 Isdpfx Agjxp Siyo Dea Working width: 1 meter to 2.6 meters Maximum setting width: 2.75 meters Speed: 1.7 meters to 35 meters per minute

Year of construction: 2025, condition: new, Big Bag rack Isdpfx Ajxnbk Deg Dea Cross beam for Big Bag for forklift/crane Pneumatic discharge Aluminum container for material collection With sieve and suction connection with filter

Condition: new, A simple range of scissor type lifts for attaching to a crane hoist for the lifting of panels using (customer supplied) crane. 1 tonne capacity Minimum wall panel height 2000mm Ijdpefqmtkefx Ag Dja Maximum wall panel height 3500mm One man operation Weight of unit 80kgs

Condition: new, Year of construction: 2025, Minimum requirements for the forklift: 4 wheels; at least 2 tons lifting capacity; an additional oil channel available; fork length not less than 1200 mm; fork cross-section: maximum width 150 mm, maximum thickness 60 mm; minimum fork spacing: 700 mm. Isdpfsxy N Dpex Ag Dea

Condition: good (used), Year of construction: 1980, 1 complete Stocker gate saw line consisting of: 1 used fully hydraulic high-performance gate saw Supremus 710 Column width: 710 mm Frame width: 710 mm Clearance height: 700 mm Saw stroke: 500 mm Speed: 300 rpm Feed rate: 0-12 m/min Hydraulic continuous feed Hydraulic roller lifting Electric dual-button remote control for essential functions Drive: 37 kW, via intermediate gear 1 used 2-strand round timber infeed (custom built) 1 used electric Stocker auxiliary carriage, track gauge: 900 mm 1 used hydraulic Stocker quick-lock carriage, track gauge: 900 mm 1 used Stocker splitting wedge, non-driven 14 non-driven rollers, 1200 mm wide 1 used 3-strand cross conveyor to the double edger 1 used Paul double edger KME2/750 L, 37 kW with single lamella chip separator Width adjustment and roller lifting via joystick Iedexvpnajpfx Ag Dea The system is still in operation and can be inspected at any time.

Condition: new, color: other, Year of construction: 2021, Year of manufacture: 2021 Empty weight: 180 kg Dimensions (LxBxH): 164 x 136 x 132 cm Lifting capacity: 2.400 kg CE mark: yes General condition: very good Isdpsxn Szasfx Ag Dsa Technical condition: very good Visual appearance: very good Condition CE type: CE

Condition: used, Technical details: Ijdpfx Agsu Nuq Is Dea base plate: 210x110 mm weight of the machine approx.: 60 kg space requirements of the machine approx.: 0,7x0,52x0,5 m copy device for grinding machines for grinding wheel forming ( profile device) details: - adjustment travel upper table longitudinal=60mm (manual) - transverse travel = 20mm - under frame=approx. 60mm ( lockable) - template table size 310x150mm perfect used condition *

Condition: used, Please contact ATS Norway for more information Iodpfx Ajwrl T Teg Dsa Please provide reference number upon request: 20721 Specifications: S70 mount, but a little wider For excavator Works as it should Weight: 645 kg 172 Bar Ready for delivery

Condition: new, A complete working station for the production of timber frame walls including the following functions 1. Framing of the wall 2. Application of cladding 3. Nailing or stapling of cladding 4. Drilling and Routing of openings and overhangs 5. Application of breather paper 6. Nailing of battens 7. Gluing of sheeting material to frames Specification Full PC control with 2 off 19” touch screens Interactive display of framing for panel assembly Automatic download from drawing software Heavy duty tables with one fixed side and one moving side 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished 1500mm minimum panel height Maximum panel height 6m Maximum panel length 20m 825mm working height 500mm maximum frame height Motorised table opening with automatic brake locking Independent retractable clamping system, for the complete access of nail guns along top and bottom rails, to enable square and accurate clamping of the panel Framing tools driven to the required position via a servo drive motor, with heights controlled by software Iedpjb Tmrvofx Ag Dsa Bridge mounted with nailing / stapling tool as standard. Options for other tools to be mounted Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail, DDS, Mitek.& Inventor Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Selection of multiple nail positions in both automatic and manual modes Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Optional stud/sheeting carriage enabling studs to remain adjacent to the operator whilst assembling the frame.

Condition: excellent (used), Tapping attachment Make EFEM Size 0 Isdpfx Aeuf Ru Eog Dea (28548) Spindle holder MK 1 Tap M1-M 4 right -left run automatic

Condition: good (used), Year of construction: 1992, The bender is set up for aluminum, chromatech and plastic frames. Ijdeqhugfspfx Ag Dsa

Condition: used, Year of construction: 2018, Field of application: Construction Serial number: 18/07xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21007 Specifications: 2018 model S70 mount Volume: 1100 liters Width: 114 cm Lightly used, according to the owner Ready for delivery Own weight: Model: Graveskuffe Iedpjwz D Aljfx Ag Dea

Year of construction: 2019, condition: used, Serial number: 180801xxxx Please contact ATS Norway for more information Please provide reference number upon request: 13218 Specifications: - 2019 model - 25 kW - Combi attachment, 40 and 50. - Ready for delivery - 1.20 m blade / digging depth Description: Digga chain digger sold for customer. Combination attachment with 40 and 50 attachment. Iodpfxsw Ia I Nj Ag Dsa Own weight: Kw: 25 Model: BFT2

Condition: used, Serial number: MS410HS-23E-1xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21476 Specifications: 665 kg S50 attachment Oil Flow: 70-90 l/min Ready for delivery Iodsxivu Hepfx Ag Doa Description: We have an MSB corporation MS410HS Spike hammer w/ S50 attachment for sale. The spike hammer has hardly been used, max 10 hours according to the owner. Everything works as it should. Ready for delivery Own weight: 665 Model: corporation MS410HS Pigghammer m/ S50 feste